MAKERFACTORY M5Stack Dual Button User guide [ml]
BN 2108283
M5Stack Dual Button
EN Quick Instru ctions
Version: 1
Delivery Content
l Unit
l Grove c able
Development Resources
Development resources and additional product information are available from:
https: //www.conrad.de/ https: //docs.makerfactory.io/
Description
The button unit features two pushbuttons.
When pressed, the button circuit is closed.
Button status can be detected by high/low signal values.
This unit communicates with the M5Core through Grove port B (GPIO
26/36).
Features
l Grove int erf ace
l Supports UIF low (Block ly , Py thon), Arduino®
l Two Lego-compat ible holes
1
Applications
l Game controller
l Remote control sw it ch
Pinout / Pin Map
M5Core GPIO36 GPIO26 5V GND
Unit Blue Button Red Button 5V GND
Specifications
Input Voltage 5 V/DC
Dimensions (approx.)
Weight (approx.) 7.6 g
48.2 x 24.2 x 15.2 mm
(L x W x H)
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product in
accordance with applicable regulatory guidelines.
You thus fulfill your s tatutory obligations and contribute to the protection of the environment.
Legal Notice
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method,
e.g. photocopy, microfilming, or the capture in electronic data processing syst ems require the prior written approval by the editor.
Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE.
2
Loading...