BN 2141872
M5Stack DC Motor Module
EN Quick Instru ctions
Version: 1
Delivery Content
l Module
l DC Motor cable (J ST/ R J12, approx . 10 cm)
l DC connec tor (XT30/ Barrel)
Development Resources
Development resources and additional product information are available from:
https: //www.conrad.de/ https: //docs.makerfactory.io/
Description
The module features a MEGA328 and a L293DD driver offering 4 channels for motor control and c ommunicates through I2C (Address:
0x56).
Extra power (6 - 12 V/DC) can be supplied through the DC input.
The M5Stack Core is then directly powered through the M-Bus connection.
Specifications
Micro controller MEGA328
1
Power input
(additional)
Drivers L293DD (4 channels)
Connections
Protocol I2C (Address: 0x56)
Dimensions (approx.) 54 x 54 x 13 mm (W x D x H )
Weight (approx.) 14 g
6 – 12 V/DC
XT30/Barrel c onnector
(ø 5.5 x 2.1 mm )
4x motor port (JST/RJ12)
2x I2C Grove port (extends Port A of
M5 Core)
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product in
accordance with applicable regulatory guidelines.
You thus fulfill your s tatutory obligations and contribute to the protection of the environment.
Legal Notice
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method,
e.g. photocopy, microfilming, or the capture in electronic data processing syst ems require the prior written approval by the editor.
Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE.
2