MAKERFACTORY M5Stack ADC User guide [ml]

BN 2108281
M5Stack ADC
EN Quick Instru ctions
Version: 1
Delivery Content
l Unit
l Grove Cable
l HT3.96 Male Connect or (2 pins)
Development resources and additional product information are avail­able from:
https: //www.conrad.de/ https: //docs.makerfactory.io/
Description
The unit is an Analog-To-Digital-Converter (ADC).
It integrates a ADS1100; a fully differential, 16-bit, self-calibrating, delta-sigma A/D converter.
The unit communicates through I2C (Pin 22/21, Address: 0x48), which enables you t o collect AD data through Port A on the M5Stack Core.
Features
l 16 bits , no miss ing codes
l Cont inuous self-c alibration
1
l Single-c ycle conversion
l Int ernal sys t em clock
l Supports UI Flow and Arduino®
l Two Lego compatible holes
Applications
l ECG signal acquisit ion
l Blood pressure measurement
l Dynamom eter
Pinout / Pin Map
M5Core GPIO22 GPIO21 5V GND
Unit SCL SDA 5V GND
Specifications
Input Voltage 2.7 - 5.5 V/DC
Current consumption 90 µA
Protocol I2C (Address: 0x48)
INL 0.0125 % of FSR max
Programmable data rate 8 - 128 sps
Amplifier Gain (Programmable)
Noise 4 µVp-p
Dimensions (approx.)
Weight (approx.) 5.9 g
1, 2, 4, or 8
32.5 x 24.1 x 10.2 mm (W x D x H )
2
Disposal
Electronic devices are recyclable waste and must not be dis­posed of in the household waste.
At the end of its service life, dispose of the product in accordance with applicable regulatory guidelines.
You thus fulfill your s tatutory obligations and contribute to the pro­tection of the environment.
Legal Notice
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D­92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data pro­cessing syst ems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE.
3
BN 2108281
M5Stack Analog zu Digital Konverter
DE Kurzanleitun g
Version: 1
Lieferumfang
l Produkt l Grove Kabel l HT3.96 Stecker (2 Kontakte)
Ressourcen für Entwickler
Ressourcen für Entwickler und zusätzliche Informationen zum Pro­dukt sind verfügbar über:
https://www.conrad.de/ https://docs.makerfactory.io/
Beschreibung
Das Produkt is ein A/D-Wandler. Es basiert auf einem ADS1100; ein 16-Bit selbstkalibrierender Delta-
Sigma-A/D-Wandler mit differenziellem Eingang. Das Produkt kommuniziert über I2C (Pin 22/21, Adresse: 0x48),
wodurch Sie AD-Daten über Port A am M5Stack Core erfassen kön­nen.
Produktmerkmale
l 16 Bits "No Mis sing Codes " l Kontinuierliche Selbs tkalibrierung
1
l Einzelzy klus-Konvertierung l Systemuhr l Supports UI Flow and Arduino® l Zwei Lego kompatible Löcher
Anwendungen
l Datenerf assung über Elek trokardiograf en l Blutdruck messung l Dynamom eter
Pinout / Pin Map
M5Core GPIO22 GPIO21 5V GND
Produkt SCL SDA 5V GND
Technische Daten
Eingangsspannung 2,7 - 5,5 V/DC
Stromaufnahme 90 µA
Protokoll I2C (Adresse: 0x48)
INL 0.0125 % von FSR (max.)
Programmierbare Datenrate 8 - 128 sps
Amplifier Gain (Programmierbar)
Noise 4 µVp-p
Abmessungen (ca.)
Gewicht (ca.) 5,9 g
1, 2, 4, oder 8
32,5 x 24,1 x 10,2 mm (B x T x H)
2
Entsorgung
Elektronische Geräte sind Wertstoffe und gehören nicht in den Hausmüll.
Entsorgen Sie das Produkt am Ende seiner Lebensdauer gemäß den geltenden gesetzlichen Bestimmungen.
Sie erfüllen damit die gesetzlichen Verpflichtungen und leisten Ihren Beitrag zum Umweltschutz.
Impressum
Dies ist eine Publikation der Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
Alle Rechte einschließlich Übersetzung vorbehalten. Reproduktionen jeder Art, z. B. Fotokopie, Mikroverfilmung, oder die Erfassung in elek­tronischen Datenverarbeitungsanlagen, bedürfen der schriftlichen Genehmigung des Herausgebers. Nachdruck, auch auszugsweise, verboten.
Die Publikation entspricht dem technischen Stand bei Drucklegung. Copyright 2019 by Conrad Electronic SE.
3
Loading...