mak DJ audio 60W SPOT MOVING HEAD User Manual

Use on Dimmer

Outdoor Use

Sound Activated

DMX

Master/Slave

115 V / 230 V Voltage

Selection Switch

Replaceable Fuse

User Serviceable

Duty Cycle

60W SPOT MOVING HEAD

USER MANUAL

Snapshot

1． BEFORE YOU BEGIN… ………………………………………………………… ………3

WHAT IS INCLUDED……………………………………………………………………………3
UNPACKING INSTRUCTIONS………………………………………………………………… 3
MANUAL CONVENTIONS………………………………………………………………………3
ICONS…………………………………………………………………………………………3

SAFETY INSTRUCTIONS………………………………………………………………………4

2．INSTRODUCTION……… ………………………………………………………………5

FEATURES…………………………………………………………………………………… 5
PHOTOMETRICS……………………………………………………………………………… 5
PRODUCT DIMENSIONS……………………………………………………………………… 6

PRODUCT OVERVIEW………………………………………………………………………… 7

3．SETUP……………………… ……………………………………………………………… 8

AC POWER…………………………………………………………………………………… 8

POWER LINKING………………………………………………………………… ……………8

SIGNAL LINKING（DMX）……………………………………………………………………… 9

FUSE REPLACEMENT……………………………………………………………………………9

MOUNTING………………………………………………………………………………………9
ORIENTATION………………………………………………………………………………… 10

RIGGING……………………………………………………………………………………… 10

4. OPERATING INSTRUCTIONS……… ……………………………………………………11

CONFIGURING THE STARTING ADDRESS…………………………………………………… 11

CONTROL PANEL FUNCTIONS…………………………………………………………………11

MENU MAP……………………………………………………………………………………12

DMX OPERATION………………………………………………………………………………13

STANDALONE OPERATION…………………………………………………………………… 13

AUTOMATIC FAST…………………………………………………………………………… 13

AUTOMATIC SLOW…………………………………………………………………………… 13
SOUND-ACTIVE…………………………………………………………………………………13
MASTER/SLAVE…………………………………………………………………………………14

DMX CHANNEL VALUES……………………………………………………………………… 15

5. APPENDIX…………………… ………………………………………………………………17

DMX PRIMER …………………………………………………………………………………17
GENERAL MAINTENANCE………………………………………………………………………17
FIXTURE LINKING………………………………………………………………………………18

DATA CABLING…………………………………………………………………………………18
DMX DATA CABLE………………………………………………………………………………18
CABLE CONNECTORS………………………………………………………………………… 18

3-PIN TO 5-PIN CONVERSION CHART………………………………………………………… 18

SETTING UP A DMX SERIAL DATA LINK……………………………………………………… 19

SETTING THE STARTING ADDRESS…………………………………………………………… 19

GENERAL TROUBLESHOOTING…………………………………………… ……………………20

TECHNICAL SPECIFICATIONS……………………………………………………… ……………21

TABLE OF CONTENTS

1. BEFORE YOU BEGIN

MEANING

This paragraph reminds you of useful, although not critical, information

1.Before You Begin

3

What is included

Unpacking Instructions

Manual Conventions

Icons



1 x Spot



1 x Mounting bracket and screws



1 x Power cable
1 x User Manual




Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that
all parts are present, and have been received in good condition. Notify the shipper immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture
must be returned to the factory, it is important that the fixture be returned in the original factory box
and packing.

manuals use the following conventions to differentiate certain types of information from
the regular text.

CONVENTION

[10]

<Menu>

1~512

50/60

Settings

MENU > Settings

ON

This manual uses the following icons to indicate information that requires special attention on the part
of the user.

ICONS

A LCD display to be configured
A key to be pressed on the fixture’s control panel
A range of values
A set of values of which only one can be chosen
A menu option not to be modified (for example, showing the operating

mode/current status)
A sequence of menu options to be followed
A value to be entered or selected

This paragraph contains critical installation, configuration or operation
information. Failure to comply with this information may render the fixture
partially or completely inoperative, cause damage to the fixture or cause
harm to the user.

This paragraph contains important installation or configuration information.
Failure to comply with this information may prevent the fixture from
functioning correctly.

MEANING

Safety Instructions

1.Before You Begin

4

● Avoid direct eye exposure to the light source while it is on.

Please keep this User Manual for future consultation. If you sell the unit to another user, be sure that
they also receive this instruction booklet.

Always make sure that you are connecting to the proper voltage, and that the line voltage you are
connecting to is not higher than that stated on the decal or rear panel of the fixture.

This product is intended for indoor use only! To prevent risk of fire or shock, do not expose fixture to
rain or moisture.

Make sure there are no flammable materials close to the unit while operating.
The unit must be installed in a location with adequate ventilation, at least 20 in (50 cm) from adjacent

surfaces. Be sure that no ventilation slots are blocked.
Always disconnect from power source before servicing or replacing fuse and be sure to replace with

same fuse source.
Secure fixture to fastening device using a safety chain.
Maximum ambient temperature (Ta) is 104° F (40° C). Do not operate fixture at temperatures higher

than this.
In the event of a serious operating problem, stop using the unit immediately. Never try to repair the

unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please
contact the nearest authorized technical assistance center.

Never connect the device to a dimmer pack.
Make sure the power cord is never crimped or damaged.
Never disconnect the power cord by pulling or tugging on the cord.
Never carry the fixture directly from the cord. Always use the hanging/mounting bracket.

Never carry the fixture by holding the head. Always use the carrying handle.

Please read these instructions carefully. It includes important information

about the installation, usage and maintenance of this product.

2. INTRODUCTION

2.Introduction

5

Features

● 10 or 15-channel DMX moving yoke

● Pan : 540° / tilt: 270°

● Color wheel

● Gobo Wheel 1:

● Gobo Wheel 2:

● 3-facet prism

● Variable electronic shutter (for strobing)

● Variable motorized focus

● Variable electronic dimmer (0 – 100%)

● Remote fixture reset & vector speed channel

● Individual reset of pan/tilt, color, gobo, prism, focus

● Move-in-black for pan/tilt, color, gobo

● Built-in movement macros via DMX (automated and sound)

Additional Features

● Built-in automated programs via master/slave

● Built-in sound-active programs via master/slave

● High-power, 60 W, 13.5 A LED

● User-selectable pan/tilt ranges

● Automatic pan & tilt correction

● User-selectable basic or advanced operating modes

● Additional power output: max 4 units

Photometrics

7 colors + white
Split colors
Rainbow effect

8 static gobo+open+rainbow effect

6 gobo + open, 5 metal,1 glass installed
Rainbow effect+Gobo shake

Pan: 540 , 360 , 180
Tilt: 270 , 180 , 90

2.Introduction

6

Product Dimensions

2.Introduction

7

Pan

Tilt

Product Overview

Front lens

Control

Panel

Power

Fuse Holder

Standing feet

DMX IN

DMX OUT