Majority CB30-DAB-WHT, CB30-DAB-BLK User Manual

Majority Madingley Rise
Bedside DAB Docking Station
CB30-DAB-WHT/BLK
User Guide
Video step by step guidance also available online at www.majoritytech.co.uk
IMPORTANT
INDEX
1. Index
2. Controls and Functions
3. “What’s in the box?” and Basic Operation
4. DAB Radio Mode
5. Set up of the DAB Radio Preset Stations
6. FM Radio Mode
7. Set up of the FM Radio Preset Stations
8. iPod/iPhone Mode
9. Aux-In and Dual USB Ports
10. Clock Setting and Dual Alarm Setting
11. Alarm Sound and Snooze
12. Sleep Setting, Display Brightness and System Reset
13. Technical Specifications and Warranty
14. Important Safety Information
IMPORTANT
Controls and Functions
1.LCD Display
2.Aux-In jack
3.DC IN 9v jack – wall plug
4.Power On/Off
5.Dock
6.Preset button
7.Mode
8.Info
9.Alarm/Snooze/Sleep
10.Volume Down -
11.Volume Up +
12.Dimmer/Standby
13.Scan
14.Previous/Back Button
15.Enter/Pause
16.Next/Forward Button
17.Antenna
16
10
6
7
8
9
11
12
13
14
15
17
IMPORTANT
“What’s in the box?”/Basic Operation
“What’s in the box?”
Majority Madingley Bedside
DAB Docking Station
Please note all (Ref.) refer to Page 2 Controls and Functions mapping guide.
Basic Operation
Plug the connector into the back of the system labelled DC IN (Ref.3) and the power supply plug into the mains.
Power Supply ON/OFF at back of system (Ref.4).This display will show “Welcome to Digital Radio” and go into standby
showing the clock.
Fully extend the antenna (Ref.17) so that it can rotate to get the best DAB or FM signal.
Press and hold the ‘Standby/Dimmer’ button to turn on the unit (Ref.12). The system will go straight into auto tuning the DAB
radio station - this may take a few minutes.
Press the ‘Mode’ button multiple times (Ref.7) to switch to “FM”, “iPod” or “AUX-IN”.
Standby
To change the music system back into standby, press and hold the ‘Standby/Dimmer’ button (Ref.12). To turn off fully, press the button on rear of the unit (Ref.4) and switch off at the mains. The cord must be out of reach of children.
UK Standard Plug DC 9v Power Supply
Instructions Guide
IMPORTANT
DAB Radio Mode
DAB Radio
Press and hold the ‘Standby/Dimmer’ button (Ref.12).
Pull up the antenna (Ref.17).
Then press the ‘Mode’ button (Ref.7) to choose your options. Choose “DAB” if not already in this mode.
The system will auto-scan on first use, but if you wish to re-scan press the ‘Scan’ button (Ref.13) and then release.
The radio will automatically save all the stations with a strong signal.
After searching has finished it will automatically play the first station stored.
If there is no signal then “No Signal” will be displayed.
To listen to the tuned in stations press ‘Next’ (Ref.16) to search forward and ‘Prev’ (Ref.14) to search back.
In DAB Mode, the radio will synchronize with the time and date of the station.
In DAB Mode press the ‘Info’ button (Ref.8) multiple times to display Dynamic Label Segment (Supplementary data service in text
form), station name, time and date, frequency, bit rate or signal quality.
IMPORTANT NOTE: PLEASE MAKE SURE YOU HAVE EXTENDED THE ANTENNA TO ITS FULL LENGTH (Ref.17). THIS WILL ENABLE YOU TO ROTATE IT TO GET THE BEST SIGNAL.
Loading...
+ 10 hidden pages