BEN-BAR-BLK-2
BEN NEVIS II
Bluetooth Soundbar with Subwoofer
Instructions Guide
Controls And Funcons ���������������������������������������������� 1
What’s In The Box? ����������������������������������������������������5
Support �������������������������������������������������������������������� 6
Instrucons Guide �����������������������������������������������������7
Fixing the Soundbar: Using the RCA Audio Cable ����� 7
Fixing your Soundbar: Using the Opcal Input ��������� 8
Using the MP3 LINK Connecon (Line In) ����������������� 9
Connecng to the Mains Supply ������������������������������ 10
Connecng the Soundbar and Sub-woofer ��������������11
Bluetooth Operaon ������������������������������������������������ 12
FM Mode ����������������������������������������������������������������� 14
Troubleshoong �������������������������������������������������������15
Specicaon ������������������������������������������������������������ 16
Warranty ����������������������������������������������������������������� 16
Safety Informaon����������������������������������������������������17
Contents
Watch video tutorials and register
your product for a FREE 3-year warranty
at www.majorityradios.co.uk
YEAR
WARRANTY
1
Controls And Funcons
Side View/Control Buttons
7
8
9 10
POWER
Mode
VOL +/ NEXT
VOL -/ PREV
USB
LINE IN
BEN NEVIS
1
2
3
4
5
6
1. Power
2. Mode
3. Volume +/Next
4. Volume-/previous
5. Line In
6. USB Function
7. Subwoofer Output
8. Optical Input
9. DC Power Input
10. Wall Bracket
Back View
2
Controls And Funcons
Remote Control
10. Power On/O
Switch the unit between on and
Standby mode
11. Volume +
Press to increase the volume
12. Back Step
Use in AUX or Bluetooth mode to go
back a track.
13. Play/Pause
Press to play and pause
14. Volume -
Press to decrease the volume
15. Bass increase
Press to increase the bass
16. EQ
Press the button to adjust the
equaliser. Press and hold the button
to turn the soundbar LED light on
and o.
17. Bass decrease
Press to decrease the bass
18. MODE
Press button repeatedly to switch
between soundbar modes
19. Forward Step
Use in AUX or Bluetooth mode to go
forward a track
20. Treble increase
Press to increase the treble
21. Treble decrease
Press to decrease the treble
10
11
12
13
14
15
16
17
18
19
20
21
3
The remote control sensor at the front of the soundbar is
sensitive to the remote control’s commands up to a maximum of
8 metres away and within a maximum arc of 30 degrees.
Please note that the operating distance may vary depending on
the brightness of the room.
Controls And Funcons
Using the Remote Control
4
Controls And Funcons
Subwoofer
BEN NEVIS
Wireless Bluetooth Surround Bar & Subwoofer
Technical Specications
Bluetooth 2.1 + EDA
Wireless Subwoofer 70w
Power Source: External DC adaptor 12V/1A
ANT
POWER
OFF ON
DC IN 12V
1
2
3
1. Bluetooth Receiver
2. DC adapter input
3. Power Switch
5
What’s In The Box?
1. Majority Ben Nevis Soundbar
2. Remote Control
3. Power Adapter x 2
4. 3.5mm to 3.5mm Audio Cable
5. Bluetooth Subwoofer
6. Instruction Manual
1. Majority Ben Nevis II Soundbar
2. Remote
Control
3. Adapter 4. Audio
Cable
5. Subwoofer
6. Instruction
Guide
Box Contents
6
Thank you for your purchase of the Majority Ben Nevis II.
Please follow the guidance of the manual to set up your new
purchase and begin enjoying its features.
If you require further assistance with your new soundbar,
please contact our support team on the Majority website:
https://www.majorityradios.co.uk/support
Support
Support
7
Instrucons Guide
Use the RCA Stereo Audio Cable to connect the TV’s stereo
RCA(L/R) audio output socket.
Connect the audio output cable to the side of the Sound bar via
the ‘LINE IN’ input sockets of the unit (Ref.)
Then press the MODE on the remote control (Ref.) or press the
Mode button on the unit (Ref.) to scroll to the LINE function.
Turn on your television set to use the Majority Ben Nevis.
Rear view of the unit
RCA stereo audio cable
AUX IN
Fixing the Soundbar: Using the RCA Audio Cable
8
Instrucons Guide
You will need: An audio source with an Optical Audio Output and a Digital
Optical Audio cable (not included)
Connect the Digital Optical Audio cable to the optical output
on the audio source and to the Optical Input on the speaker bar
(Ref.)
Press the POWER button on the soundbar (Ref.) or POWER
button directly on the remote control (Ref.) to switch on the
unit.
Press the MODE button on the remote control (Ref.) to switch
to Optical mode or select the Mode button (Ref.) on main unit
repeatedly to select the Optical mode.
Using the native controls on your connected device, make
sure the audio settings are set to PCM or Optical Audio and are
turned On. Audio from the connected audio source will now be
played through the speakers.
Rear view of the unit
OPTICAL cable
OPTICAL
OPTICAL IN
Fixing your Soundbar: Using the Optical Input
9
Instrucons Guide
Plug one end of a 3.5mm audio input cable (included) into the
Line In on the unit (Ref.) . Before use, disconnect any cables
connected to the Stereo RCA Inputs.
Plug the other end of the cable into the audio output/
headphone output on an MP3 player or other audio source.
Press the Power button on the soundbar (Ref.) or POWER
button directly on the remote control (Ref.) to switch on the
unit.
Press the Mode button repeatedly on the soundbar (Ref.) or
press the MODE button on remote control (Ref.) repeatedly to
enter LINE in mode.
Audio played through the connected device will now be heard
through the speakers.
Audio device
3.5mm to 3.5mm
audio cable
LINE-IN
Using the MP3 LINK Connection (Line In)
10
Instrucons Guide
Ensure that the power supply voltage is in the voltage of
100V~240V.
This unit is designed to use adapter.
Connecting the unit to any other power source may cause
damage to the unit.
Unwind the mains cable to its full length. Connect the mains
plug to a mains socket. Make sure the mains plug is fully inserted
into the mains socket.
Connect the Adapter to the unit and AC Socket (Ref.)
DC 12V IN
DC-in Power Cable
Ensure all audio connecons of the unit are connected before connecng
to the mains power socket.
Unplug the power cord from the outlet when the unit is use for an
extended period of me.
!
Connecting to the Mains Supply
11
Connecting the Soundbar and Sub-woofer
Instrucons Guide
The sub-woofer and soundbar will wirelessly connect to each
other for a surround sound experience. This allows you to place
the sub-woofer within the corner of the room to ensure that the
sound from your TV lls the room.
To connect them together, please ensure that your soundbar is
being mains powered and switched ‘ON’ for initial set up. To do
this, press the Power button (Ref.) on the unit or the POWER
button on the remote control (Ref.)
Follow by plugging the sub-woofer into a power source, and
turning it ON via the power switch (Sub Woofer Ref.)
The sub-woofer and soundbar should then automatically
connect via wireless Bluetooth connectivity.
If you are having connectivity issues, please move the subwoofer closer to the soundbar for set up.
12
Instrucons Guide
Pairing a Bluetooth Device for the First Time
Press the POWER button on the unit (Ref.) or the POWER button
on the remote control (Ref.) to switch on the unit.
Select and press the MODE button repeatedly on the remote
control until in Bluetooth mode (Ref.) or press the Mode
button (Ref.) repeatedly on the soundbar to enter Bluetooth
mode.
Using the native controls on your Bluetooth device, select the
“Majority Ben Nevis II” in your Bluetooth settings to pair.
If your device requests a password, enter the default “0000”.
Refer to the user manual for your specic device for instructions
on pairing and connecting Bluetooth devices.
When successfully paired and connected, a beep will issue from
the unit. After initial pairing, the unit will stay paired unless
unpaired manually by the user.
If your device should become unpaired or you nd it is unable to
connect, repeat the above steps.
Bluetooth Operation
13
Follow the instructions for pairing a Bluetooth device.
Use the native controls on the connected Bluetooth Device to
select a track.
To Play/Pause the track or Skip Forwards/Backwards to a
selected track, use the remote control (Ref., 13, 19)
Audio played through the connected Bluetooth device will now
be heard through the speakers.
Instrucons Guide
Playing Audio Wirelessly
14
FM Mode
Select and press the MODE button repeatedly on the remote
control (Ref.) or press the Mode button on the soundbar
repeatedly to enter FM mode (Ref.).
Ensure that the wire aerial on the back panel of the sound bar is
extended.
When on FM mode, press and hold the ‘Play/Pause’ button on
the remote (Ref.) or on the soundbar to begin searching for
available FM stations.
After the search is complete, the soundbar will save the stations
with good signal. To scroll through these saved stations, press
the ‘Previous/Next’ buttons on the remote control (Ref./19).
Please note:
If you are having trouble with receiving stations, complete
another auto-scan and adjust the aerial if needs be.
Instrucons Guide
15
Troubleshoong
If the Soundbar does not work properly as desired, please check
the following checklist.
Malfunction Possible causes/measures
No power / function
Check whether the power is switched on or
o at the wall.
Check whether the power adaptor is
properly connected to power outlet or not.
No sound
Check whether cables are properly installed.
If they are, please try alternative cable to
connect to your TV if possible.
Check unit is out of standby and in mode.
No sound from bluetooth
connection
Forget the soundbar from your device and
reconnect.
Check whether external device requires
password “0000” to start with.
Function disturbance
Switch o and unplug the unit. Leave it for
minutes and switch it on again.
If a particular mode is causing problems,
please try an alternative connection to
your TV such as Optical or Bluetooth.
Remote control does not work
[properly]
Check whether the battery run out or not.
Replace with a new one if necessary.
Check whether there is obstacle on the
front of remote sensor.
Troubleshooting
16
Specicaons
Power Supply
DC 12V/1A
Power Consumption
W
Power Output (max)
W* + W Subwoofer
Frequency Response
+/- dB
Bluetooth V3.0
Dimension (WxHxD) . x . x . cm sound bar
x . x . cm sub woofer
Specication
All products come with a standard 12 month warranty. All items
must be registered on www.majorityradios.co.uk for the
warranty to be valid. Once on the web page, use the menu to
nd “Register Your Product”. You will also be given the chance
to extend your warranty for an additional 24 months, free of
charge.
Warranty
17
1. Read these instructions.
2. Keep these instructions. Instructions are also
available for download at www.majorityradios.co.uk
3. Heed all Warnings
4. Follow all instructions
5. Do no clean the apparatus near or with water
6. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions
7. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including ampliers) that produce heat.
8. Protect the power from being walked on or pinched
particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
9. Only use attachments/accessories specied by the
manufacturer.
10. Unplug this apparatus during light storms or when
unused for long periods of time.
11. Refer all servicing to qualied service personnel.
Servicing is required when the apparatus has been
damaged in a way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to the rain or moisture, does not
operate normally or has been dropped.
12. No naked ame sources, such as lit candles, should
be placed on the apparatus.
13. Dispose of used electrical products and batteries
safely according to your local authority and
regulations.
ADDITIONAL WARNINGS
The apparatus shall not be exposed to dripping or
splashing and no objects lled with liquid, such as
vases, shall be places on the apparatus.
Main plug is used to disconnect device and it should
remain readily operable during intended use. In order
to disconnect the apparatus from the main mains
completely, the mains plug should be disconnected
from the main socket outlet completely.
Battery shall not be exposed to excessive heat such as
sunshine, re or the like.
RECYCLING ELECTRICAL PRODUCTS
You should now recycle your waste electrical goods and
in doing so help the environment.
This symbol means an electrical product should
not be disposed of with normal household waste.
Please ensure it is taken to a suitable facility for
disposal when nished with.
IMPORTANT: Please read all instructions carefully
before use and keep for future reference.
Risk of electric shock.
Do not open
Read all instructions carefully before use
and keep for future reference
When servicing, use only identical
replacement parts
ATTENTION
RISQUE D’ELECTROCUTION
NE PAS OUVRIR
!
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
!
Safety Informaon
IMPORTANT: Please read all instrucons carefully
before use and keep for future reference
!
www.majorityradios.co.uk
Loading...