PRODUCT SPECIFICATIONS
38-1/8”
(968mm)
8-9/16” (218mm)
Min. Rough Opening Width
55-1/2” (1410mm)
24-1/2”
(622mm)
24-1/4”
(616mm)
Min. Rough
Opening
Depth
1/2” or 5/8”
Min. Rough
Opening
Height
1”
(25mm)
4”
(102mm)
50-9/16”
(1284mm)
4-1/4”
(108mm)
36”
(914mm)
50-5/16”
(1278mm)
44-7/16”
(1129mm)
55”
(1397mm)
45”
(1143mm)
42”
(1067mm)
19-1/16”
(484mm)
38-1/8”
(968mm)
8-9/16” (218mm)
Min. Rough Opening Width
55-1/2” (1410mm)
24-1/2”
(622mm)
24-1/4”
(616mm)
Min. Rough
Opening
Depth
1/2” or 5/8”
Min. Rough
Opening
Height
44-1/16”
(1119mm)
1”
(25mm)
4”
(102mm)
50-9/16”
(1284mm)
4-1/4”
(108mm)
36”
(914mm)
50-5/16”
(1278mm)
44-7/16”
(1129mm)
55”
(1397mm)
45”
(1143mm)
42”
(1067mm)
19-1/16”
(484mm)
KHLDVP600 Marquis Direct Vent
Fireplace System
FRAMING DIMENSIONS
Min. Rough
Opening
Depth
19-1/16”
(484mm)
38-1/8”
(968mm)
ACTUAL DIMENSIONS
Actual size: 55" W x 447⁄16" H x 241⁄4" D
(1397 mm x 1129 mm x 616 mm)
Viewing area: 42" W x 36" H
(1067 mm x 914 mm)
Framing Dimensions: 551⁄2" W x 509⁄16"H x 241⁄2"D
(1410 mm x 1284 mm x 622 mm)
FIELD INSTALLED ACCESSORIES
• Signature Command Dual Forced with Blower: BLOTKHLDVSC
• Firebrick (Required): Tavern Brown, Cottage Clay, Vintage
Brown Herringbone, Olde English Herringbone
• Andirons
• Field Conversion Kits
• Safety Screen Barrier Included
24-1/2”
(622mm)
Min. Rough
Opening
Height
50-9/16”
(1284mm)
(1278mm)
24-1/4”
(616mm)
44-7/16”
(1129mm)
50-5/16”
Min. Rough Opening Width
55-1/2” (1410mm)
4-1/4”
(108mm)
36”
(914mm)
4”
(102mm)
(1397mm)
42”
(1067mm)
55”
45”
(1143mm)
44-1/16”
(1119mm)
8-9/16” (218mm)
1/2” or 5/8”
1”
(25mm)
Page 1 of 2
60-3/4”
(1543 mm)
43-1/4”
(1099mm)
60-3/4”
(1543mm)
85-15/16”
(2183mm)
PRODUCT SPECIFICATIONS
KHLDVP600 Marquis Direct Vent
Fireplace System
MANTEL CLEARANCES
NOTE: The combustibles area above the facing must
not protrude more than 3/4" from the facing. If it does,
it is considered a mantel and must meet the mantel
requirements listed in the owner’s manual.
12”
(305 mm)
Max. Depth
72” (1829 mm)
Minimum
Ceiling
6”
(152 mm)
Min.
Hearth Minimum
Fireplace Opening
16"
(406 mm)
(305 mm)
Wall
12" (305 mm)
6" (152 mm)
1
2
/2" (64 mm)
12"
(254 mm)
10"
2
(64 mm)
WARNING
10” (254 mm)
Min.From Opening
Hearth 8” Min.
(203 mm)
Noncombustible
1
/2” Max Depth
16” (406 mm)
Min. From Opening
Stud
Insulation
Board
Standoff
TECHNICAL SPECIFICATIONS
Max. Btu Input: 60,000 BTU/HR NG: 57,000 BTU/HR LP
Ignition System: Signature Command™ System
Gas Type: Natural or LP
Fl ue Type: DVP
Termination: Top Vent
Clearance to Flue for Interior: 3” Top, 1” Bottom and Sides*
Clearance to Flue for Outside Wall: 1”
Clearance to Fireplace: 1"
Minimum Vent Height Before Elbow: 24"
CSA Design Certied
CLEARANCE TO FLUE
Minimum 4" (102mm) clearance to the top along horizontal
length until flue penetrates outside wall*
Minimum of 1" (25 mm) clearance to combustibles permitted
at outside wall
CLEARANCE TO COMBUSTIBLES
Fireplace: 0" clearance to standoffs on all sides
Floor of Unit to Ceiling: 72" (1.83 m) to combustibles
Firebox Opening to Wall: 6" (152mm)
Hearth Requirement: 0"
EFFICIENCY DATA
Thermal Efficiency: Up to 85%
AFUE Efficiency: 66% (Nat.) / 66% (LP)
P4 Canada Efficiency: 81% (Nat.) / 80% (LP)
* When vertical rise is 7 1/2' (2.29 mm) or higher from base of unit, the
horizontal vent clearance to combustibles is 1" (25 mm) on all sides.
Top of Fireplace
Opening
FP2235
Side View
FP2129
Fireplace Opening
Top View
1"
11/2"
31/2"
1
/2"
2
3"
5"
6"
1
4
/2"
45°
149 Cleveland Drive, Paris, Kentucky 40361
www.majesticproducts.com
To avoid personal injury or property damage, the product described by this brochure must be installed, operated and maintained in strict compliance with the instructions packaged with the product and all applicable building or fire
codes. Contact local building or fire officials about restrictions and installation inspection requirements. All photographs and drawings on this brochure are for illustrative purposes only and are not intended for, nor should they be used
as a substitute for the instructions packaged with the unit. Appearance and specifications of the product are subject to change without notice. ©2015 Hearth & Home Technologies® 1115v2
Page 2 of 2