Majestic BE36 Specifications

PRODUCT SPECIFICATIONS

Hearth Dimensions

20.91”

17.28”

35.56”

23-3/4" [603]

11-7/8"

[302]

41" [1041]

21-3/8"

[543]

7-3/8"

[187]

36" [914]

21"

[533]

14-1/8"

[359]

18-3/4"

[476]

21"

[533]

7-1/2"

[191]

7-1/2"

[191]

Top View

Front View

9-1/4

[235]

17-7/8

[453]

7-1/2

[191]

13-1/2

[476]

Gas

Knockout

Outside

Air

9-1/4"

[235]

Gas

Knockout

7-1/2"

[191]

39-1/2"

[1003]

Left Side View

Right Side View

48" [1219]

14"

[356]

34"

[864]

42"

[1067]

67-7/8" [1724]

Across a

corner

BE36 Royalton Radiant Wood Burning Fireplace

DIMENSIONS

STANDARD FEATURES

OPTIONAL FIELD INSTALLED ACCESSORIES

Actual size: 36" W x 391⁄2" H x 213⁄8" D x 293⁄4" RW

(914 mm x 1003 mm x 543 mm x 756 mm)

Viewing area: 36" W x 21" H (756 sq. in.)

(914 mm X 533 mm, 4878 cm

Framing Dimensions: 42" W x 39

(1067 mm x 1010 mm x 546 mm)

• Uninsulated radiant ﬁreplace

• Traditional full refractory lining

• Powder coated ﬁnish

⁄4" H x 211⁄2" D

)

• Safety ﬁrescreen

• Dual gas knockouts

• Steel grate

• Front access damper handle

• Attic insulation shield standard

• Ash lip

• UL/ULC Listed

• Bi-fold glass doors with Black trim (DM1036) or Stainless trim (DM1036S)

• SL300 series termination caps

• Heat wrap insulated blanket (HW8040)

• 4" insulated ﬂex duct for outside air (ID4)

• 4" uninsulated ﬂex duct for outside air (UD4)

• Chimney air kit (CAK4A)(required in Canada)

• Outside air kit (AK24m)

Page 1 of 2

PRODUCT SPECIFICATIONS

[305 mm]

BE36 Royalton Radiant Wood Burning Fireplace

MANTEL CLEARANCES

Grid represents 1” scale

Combustible Wall

2 x 4 stud wall

Standoffs

Seal joint with non-combustible sealant

1 1/2 in./38 mm

maximum

Non-combustible Decorative Facing such as: Steel, iron, brick, tile, concrete, slate, glass, plasters.

Combustible Decorative Facing

12 in./305 mm

minimum

6 in./152 mm

minimum

Measured from top of fireplace opening

6 ft (1829 mm)

minimum

base of fireplace

to ceiling

SURROUND, STUB WALL, MANTEL LEG CLEARANCES

TECHNICAL SPECIFICATIONS

• Flue series: SL300 series pipe

• Flue size: 8" (203 mm) inner; 10

⁄2" (267 mm) outer

• Clearance to ﬂue: 2" (51 mm)

• Firestop framing: 14

⁄2" x 141⁄2" (368 mm x 368 mm)

15° - 14

30°- 14

⁄2" x 183⁄8" (368 mm x 467 mm)

⁄2" x 23" (368 mm x 584 mm)

• Minimum ﬂue height: 13' (4 m)

• Maximum ﬂue height: 90' (27.4 m)

• Minimum height with single offset/return: 14

⁄2' (4.4 m)

• Minimum height with double offset/return: 20' (6.1 m)

• Minimum hearth size: 16" D x 52" L (406 mm x 1321 mm)

• UL/ULC design certiﬁed

CLEARANCES

• Clearance to ﬁreplace: 1/2" (13 mm) to sides and back

• Maximum mantel depth: 12" (305 mm) from top of

ﬁreplace opening

• Minimum mantel height: 6" (152 mm) from top of ﬁreplace opening

• Adjacent combustible sidewalls: minimum 12" (305 mm) from

ﬁreplace opening

• Mantel leg, surround, stub wall, whether combustible or

non-combustible may be constructed as shown in the

second drawing.

Grid represents 1” scale

4 in.

[102 mm]

9 3/4 in.

[248 mm]

11 1/4 in. [286 mm]

FLUSH FRONT

50° angle

[914 mm]

BRICK

FRONT

39° angle

[1041 mm]

12 in.

[305 mm]

A Brand of Vermont Castings Group

149 Cleveland Drive, Paris, Kentucky 40361

www.majesticproducts.com

To avoid personal injury or property damage, the product described by this brochure must be installed, operated and maintained in strict compliance with the instructions packaged with the product and all applicable building or ﬁre codes. Contact local building or ﬁre ofﬁcials about restrictions and installation inspection requirements. All photographs and drawings on this brochure are for illustrative purposes only and are not intended for, nor should they be used as a substitute for the instructions packaged with the unit. Appearance and speciﬁcations of the product are subject to change without notice. © 2015 Vermont Castings Group 0415v1

Page 2 of 2