Majella MCVC - Expansion User Manual
MCVC - Expansion
USER MANUAL
Version 1.0
MCVC
User Manual
©2018 Majella Audio
2
INTRODUCTION
THE MCVC Expansion
The MCVC is a four-channel MIDI (Musical
Instrument Digital Interface) to Control
Voltage (CV) expansion module. This
module expands the original MCVC with
four extra voices offering: Pitch, Velocity and
gate output voltages.
CONTENTS
The MCVC Expansion comes in a box and is
fully assembled and tested. Included are a
16-pin IDC power cable and M3 mounting
screws + rack crash protection washers.
SUPPORT
If you have any further questions or queries
please contact:
support@majella-audio.com
SPECIFICATIONS
Below are the specifications of the MCVC.
!! Dimensions 128,5 x 40 (14 HP) x
15mm
!! Doepfer A-100 compatible
!! 16pin Power (
Using 5V rail!
)
!! Current usage: +12V 12mA, -12V 13mA,
5V 30mA.
POWER CONNECTION
This Module is designed to be connected to
a Eurorack system power supply using a 16
pin ribbon cable. The -12V (red lead) should
be directed as shown in the picture below.
WARNING!
The MCVC Expansion module is designed
for Eurorack systems. The supply should be
+-12V and connected signals should not be
outside of the +-12V range! Do not reverse
polarity when connecting the power, this
will damage your module permanently!
Please treat your Majella Audio products
with care. Majella Audio does not offer
warranty for any damages to the module
due to irresponsible behaviour.
Loading...