Page 1
MAINSTAYS ADIRONDACK CHAIR
ASSEMBLY INSTRUCTIONS
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
11
Style # TM240302
QUESTION ?
Identify all parts and hardware. If any pieces are missing call our toll free number
at 1-888-287-4275 from 9:00 am to 5.00 pm CST (Monday to Friday) or e-mail
help@crestwoodgc.com for replacement parts. For faster service, have the style number
handy when calling.
Page 2
NO. DESCRIPTION Q'TY
2
LIST OF HARDWARE PARTS
F
G
C
1 1/4" Bolt ............ 4 Pcs
1 1/2" Bolt ............ 6 Pcs
Right leg
Left leg
Right arm rest
Left arm rest
Seat
Back
Back support rail
A1
A2
B1
B2
C
D
E
1 Pc
1 Pc
1 Pc
1 Pc
1 Pc
1 Pc
1 Pc
IMPORTANT !
* ASSEMBLE YOUR UNIT IN AN AREA FREE FROM ANY OBJECTS THAT MIGHT SCRATCH
THE SURFACE OF YOUR UNIT.
* EXAMINE ALL PACKING MATERIAL BEFORE DISCARDING, SHORTAGES MAY OCCUR FROM
PARTS LEFT IN THE PACKING MATERIAL.
* PLEASE READ THE INSTRUCTIONS CAREFULLY, AND VERIFY ALL PARTS ARE INCLUDED.
* ALL BOLTS NEED TO BE TIGHTENED FROM TIME TO TIME TO AVOID DAMAGE.
A1
B2
LIST OF WOODEN PARTS
A2
8" Phillips screwdriver
- for tightening all bolts.
TOOLS REQUIRED
For proper assembly use these tools (not included)
H
1 1/4" Screw ............ 6 Pcs
B1
D
E
Page 3
3
THE ADIRONDACK CHAIR IS NOW READY FOR USE.
3
4
Attach the right and left leg (A1 & A2) into the seat (C)
and secure with 1 1/2" bolts (F), using phillips
screwdriver.
A2
1
C
Attach the right and left arm rest (B1 & B2) into
assembled and secure with 1 1/4" bolts (G) from inside,
as shown.
F
F
A1
B2
B1
G
G
C
B2
Attach support rail (E) into seat holes, secure with 1 1/4"
screws (H).
Attach the back (D) into seat and armrests (B1 & B2).
Secure to seat (C) with 1 1/4" screws (H) and to arm rests
(B1 & B2) with 1 1/4" bolts (G), as shown.
Be sure all bolts (F & G) and screws (H) are fully
tightened, using phillips screwdriver.
G
B2
B1
C
H
H
E
D
2
Loading...