
Instruction Manual
Save this Manual for future reference.
This product requires assembly prior to use. It is important that you read the entire
manual to become familiar with the unit BEFORE you set up the product..
Safety Warning and Precautions
WARNING: When using this product, basic safety precautions should
always be followed to reduce the risk of personal injury and damage to
equipment.
Read all instructions before assembly and using this product.
1. Select ideal location. This unit is h eav
and will takeyou ab out 10 minutes
to assembly this ite m. Set out all parts on a clear and level surface prior to
assembly.
the process of assembling, especiallywhen liftingheav
or large parts, p ay attention to safety. No one ot her than those assisting
should be allowed in the work area.
3. Tools and Assistance. No tools needed. Whenever possible, assistance
is preferred.
4. Check for parts available. Before assemblin
, be sure thatyou have all
parts described in the Parts List . During the process of unpacking and
assembly, please ensure that all the parts labels(stickers) are always kept
with product itself for identification.
5. Check for damaged parts. Before assembling, please check for damaged
parts. Any part that appears damaged should be carefully checked to
determine that it can be assembled properly and perform its intended function.
Any part that is damaged should be properly replaced or repaired by a qualified
technician. If you are missing parts, or have any damaged parts, please do
not return this product to the store. Contact Customer Service at
1-877-980-6928 (or customerservice@aceevert.com
) Monday through
Friday 8:30am to 5:30pm PST. We will be glad to assist you.
6. Keep children awa
. Ch ildren must never be allowed in the work area. Do
not allow them to handle parts o r tools.
7. One-
ear limited warranty. Frames and welds are warranted to be free from
defects in material or workmanship for a period of on e (1) year. Exclusions:
Items used for commercial, contract or other non-residential purposes; display
models; or items damaged due to acts of nature, vandalism, misuse or
improper assembly are not covered. Discoloration or fading of the finish or
fabrics as a result of exposure to the elements, chemicals or spills are not
covered.
1

ASSEMBLY INSTRUCTIONS
COFFEE TABLE MS13-092-921-45/MS14-303-001-24
Put washers(G) onto the pillars of table legs(C).
Insert the pillars into the holes of the table top(B)
Fixed by allen key(E). Have all the ready table
legs connect with the table top(B)
Put the glass(A) onto the frame of the coffee table. The assembled coffee table is like this.
Note: do not tighten bolts until all parts are connected.
No.
PART LIST
DESCRIPTION
GLASS
TABLE
TOP
LEG
BOTTOM
BOARD
ALLEN
KEY
BOLT
M6*15
WASHER
8PCS
4PCS
1PC
1PC
1PC
1PC
8PCS
QTY/
PCS
Connect the bottom board(D) with all the
assembled(1) by bolts(F) and washers(G).
Fixed by allen key(E).