Mahlkonig VTA6S, VTA6ST, VTA6SH, VTA6S FC, VTA6SE Operating Instructions Manual
...
|
LADENMÜHLEN SHOP GRINDERS
The professional art of grinding
since 1924
Operating Instructions
VTA6S
“The most powerful shop grinder”
|
LADENMÜHLEN SHOP GRINDERS
Dear Customer,
with the „VTA6S“ you have purchased a grinder in the well-known
MAHLKÖNIG quality.
Over 80 years of experience in the production and development
of grinders have helped us to develop a new product in the
MAHLKÖNIG company.
As usual, this new product guarantees top-quality by grinding of
all types of coffee.
Before putting the grinder into service, please read these operating instructions including the safety instructions carefully and
observe them at all times. Also instruct your personnel accordingly.
Enclosed you will fi nd many useful tips that will make it easier
for you to use the grinder. Keep these operating instructions in
a safe, easily accessible location. In case of any unclear points or
additionally required information, please contact your local dealer or us directly as the manufacturer.
MAHLKÖNIG GmbH & Co. KG
2
|
LADENMÜHLEN SHOP GRINDERS
7. Operational Problems 10
8. Recalibration of Grind Adjustment 11
9. Cleaning 11
9.1 Cleaning the Grinder Casing 11
9.2 Cleaning the Grinding Mechanism 11
10. Maintenance and Repair 13
10.1 Grinding Disc Replacement 13
11 Spare Parts 13
12 Certifi cate 14
13. Warranty Conditions 14
Table of contents
1. Safety 4
1.1 Symbols 4
1.2 Safety Instructions 4
1.3 Purpose of Use 5
1.4 User Requirements 5
2. Technical Data 6
3. Description 7
4. Safety Devices of the Grinder 8
5. Set-up and Basic Adjustment 8
5.1 Setting-up Area 8
5.2 Installation 8
6. Operation 9
6.1 Operating Instructions 9
3
|
LADENMÜHLEN SHOP GRINDERS
1. Safety
Please read and observe the following operating instructions carefully. Non-observance can result in
damage to the grinder as well as in health-threatening risks for the user.
1.1 Symbols
The following two symbols are used in this manual of operating instructions:
Safety instruction:
In case of non-observance, extreme risk of accidents
exists.
General instruction:
In case of non-observance, the grinder can become
damaged or optimum operation not be guaranteed.
1.2 Safety Instructions
Never use the grinding mechanism to grind other products or objects
than coffee beans. Ground material is never allowed to be fi lled into the
hopper.
Do not carry out any modifi cations or changes on the grinder. In case of
non-observance, the manufacturer shall be liable for resulting damage
in no case whatsoever.
Never operate the grinder in moist or, even worse, in wet surroundings.
Never put your fi ngers or objects into the rotating grinding mechanism
underneath the hopper.
Always pull the power supply plug out of the outlet before carrying out
any maintenance or cleaning work on the grinder. Never start the grinder with a defective power supply cable.
Check the grinder regularly for any signs of damage on the power supply
cable, plug, fi nger protector, etc. Any repairs that may be required are
only allowed to be carried out by experts. Please contact an authorized
customer service centre, your local dealer or us directly as the manufacturer.
Do not exceed the permissible maximum operating period of 40 minutes. Afterwards, allow the motor to cool down for approx. 30– 40 minutes.
When unpacking the grinder, please check to determine whether the
power supply voltage (volts) corresponds to the grinder voltage on the
rating plate.
Children do not recognize the risks that may arise when handling electrical grinders; therefore never leave children alone with electrical devices
without proper supervision.
Never immerse the grinder in water and do not operate it with wet hands.
4
|
LADENMÜHLEN SHOP GRINDERS
1.3 Purpose of Use
The grinder you have purchased is only allowed to be used to grind
whole coffee beans. Never fi ll already ground coffee into the hopper.
1.4 User Requirements
No special requirements are specifi ed for the users of this grinder. It is,
however, assumed that this manual of operating instructions has been
carefully read and understood and that all instructions provided in this
manual will be observed. In addition, working with the grinder on a
safety-conscious basis is also expected.
5
Loading...