Mahlkonig K501 Operating Instructions Manual

|

LADENMÜHLEN SHOP GRINDER

Operating Instructions

K501

”

Easy, modular and fast“

The professional art of grinding

since 1924

|

LADENMÜHLEN SHOP GRINDER

|

LADENMÜHLEN SHOP GRINDER

Dear Customer,

with the “K501“ you have purchased a grinder in the well-known
MAHLKÖNIG quality.

Our over 80 years of experience in the production and development of
grinders have helped us to develop a new product in the MAHLKÖNIG
company.

As usual, this product guarantees top-quality by grinding of all types
of coffee.

Before putting the device into service, please read these operating in­structions including the safety instructions carefully and observe them
at all times. Also instruct your personnel accordingly.

Enclosed you will find many useful tips that will make it easier for you
to use the grinder. Keep these operating instructions in a safe, easily
accessible location. In case of any unclear points or additionally re­quired information, please contact your local dealer or us directly as
the manufacturer.

We wish you unlimited pleasure and success with our product.

MAHLKÖNIG GmbH & Co. KG

Seite 2

|

LADENMÜHLEN SHOP GRINDER

7. Operating Faults 10

8. Cleaning 11

8.1 Cleaning with GRINDZ™ Grinder Cleaner 11

8.2 Cleaning the Hopper 11

8.3 Cleaning the Grinder Surface Area 12

8.4 Cleaning the Grinder Housing 12

9. Maintenance and Repair 12

9.1 Cleaning of the Grinding Gears 12

9.2 Grinding Disc Replacement 13

9.3 Re-adjusting the Grinding Fineness 16

10. Spare Parts 17

11. Certificate 17

12. Warranty Conditions 18

Table of Contents

1. Safety 5

1.1 Symbols 5

1.2 Safety Instructions 5

1.3 Purpose of Use 6

1.4 User Requirements 6

2. Technical Data 6

3. Description 7

4. Safety Devices 8

5. Set-Up and Basic Adjustment 8

5.1 Setting-up Area 8

5.2 Installation 8

5.3 Basic Setting 9

6. Operation 9

Seite 3

|

LADENMÜHLEN SHOP GRINDER

1. Safety

Please read and observe the following operating
instructions carefully. Non-observance can result in
damage to the device as well as in health-threaten­ing risks for the user.

1.1 Symbols

The following two symbols are used in this manual of operating in­structions:

Safety instruction:

In case of non-observance, extreme risk of accidents
exists.

General instruction:

In case of non-observance, the device can become
damaged or optimum operation not be guaranteed.

1.2 Safety Instructions

Never use the grinding mechanism to grind other products or objects
than coffee beans. Ground material is never allowed to be filled into
the hopper.

Do not carry out any modifications or changes on the grinder. In case of
non-observance, the manufacturer shall be liable for resulting damage
in no case whatsoever.

Never operate the grinder in moist or, even worse, in wet surroundings.

Never put your fingers or objects into the rotating grinding mecha­nism underneath the hopper.

Always pull the power supply plug out of the outlet before carrying
out any maintenance or cleaning work on the device. Never start the
grinder with a defective power supply cable.

Check the grinder regularly for any signs of damage on the power sup­ply cable, plug, finger protector, etc. Any repairs that may be required
are only allowed to be carried out by experts. Please contact an au­thorized customer service centre, your local dealer or us directly as the
manufacturer.

Do not exceed the permissible maximum operating period of 40 min­utes. Afterwards, allow the motor to cool down for approx. 30– 40 min­utes.

When unpacking the device, please check to determine whether the
power supply voltage (volts) corresponds to the device voltage on the
rating plate.

Children do not recognize the risks that may arise when handling elec­trical devices; therefore never leave children alone with electrical de­vices without proper supervision.

Never immerse the grinder in water and do not op­erate it with wet hands.

Seite 4

|

LADENMÜHLEN SHOP GRINDER

1.3 Purpose of Use

The grinder you have purchased is only allowed to be used to grind
whole coffee beans. Never fill already ground coffee into the hopper.

1.4 User Requirements

No special requirements are specified for the users of this grinder. It
is, however, assumed that this manual of operating instructions has
been carefully read and understood and that all instructions provided
in this manual will be observed. In addition, working with the device on
a safety-conscious basis is also expected.

2. Technical Data

Description K 501, K 501T

Voltage / Frequency 220-230V / 50Hz
Phases 110-120V / 60Hz
Rotation

@ 50 Hz 1400 rpm
@ 60 Hz 1680 rpm
Pre-fuse
230V 16 A-slow
115V 15 A-slow

Overload circiut breaker

230V 11 A
115V 12 A
Sound Emission
Idle Operation 65 dB
Operation 85 dB

Permissible max. Operating
time of the Grinder 40 min.
Dimensions in mm W 244, H 664, D 325
Net Weight 36 kg / 79.4 lbs.
Hopper Capacity 0,5 or 1,5 kg / (1.1 or 3.3 lbs.)

(Please ask the manufacturer or dealer for technical data on other voltages and frequencies.)

Seite 5