Mahlkonig EM43, EG43, EL43, EP43, EKK43 Operating Instructions Manual
...
LADENMÜHLEN | SHOP GRINDER
The professional art of grinding
since 1924
Operating Instructions
EK / EKK 43
”
Powerful Combination“
EK 43
EKK 43
LADENMÜHLEN | SHOP GRINDER
Dear Customer,
with the “EK 43” or “EKK 43“ you have purchased a grinder in the wellknown MAHLKÖNIG quality.
Our over 80 years of experience in the production and development of
grinders have helped us to develop a new product in the MAHLKÖNIG
company.
As usual, this product guarantees top-quality by grinding of all types of
coffee, spices and grains.
Before putting the device into service, please read these operating instructions including the safety instructions carefully and observe them
at all times. Also instruct your personnel accordingly.
Enclosed you will fi nd many useful tips that will make it easier for you
to use the grinder. Keep these operating instructions in a safe, easily accessible location. In case of any unclear points or additionally required
information, please contact your local dealer or us directly as the manufacturer.
MAHLKÖNIG GmbH & Co. KG
2
LADENMÜHLEN | SHOP GRINDER
7. Operating Faults 9
8. Grind Adjustment Calibration 11
9. Cleaning the Grinder 11
9.1 Cleaning with GRINDZ™ Grinder Cleaner 12
9.2 Cleaning the Grinder Casing 12
9.3 Cleaning the Grinding Mechanism 12
10. Maintenance and Repair 13
10.1 Grinding Disc Replacement 13
11. Spare Parts 14
12. Wiring Diagrams 14
13. Certifi cates 16
14. Warranty Conditions 17
Table of Contents
1. Safety 4
1.1 Symbols 4
1.2 Safety Instructions 4
1.3 Purpose of Use 5
1.4 User Requirements 5
2. Technical Data 5
3. Description 6
4. Safety Devices 7
5. Setting Up and Basic Adjustment 7
5.1 Setting-up area 7
5.2 Installation 7
6. Operation 8
6.1 How to use the grinder 8
6.2 What can be ground? 9
3
LADENMÜHLEN | SHOP GRINDER
Never operate the grinder in moist or, even worse, in wet surroundings.
Never put your fi ngers or objects into the rotating grinding mechanism underneath the hopper.
Always pull the power supply plug out of the outlet before carrying out any maintenance or cleaning work on the device.
Never put the device into service with a defective power supply
cable. Check the device regularly for any signs of damage on the
power supply cable, plug, fi nger protector, etc.
Any repairs that may be required are only allowed to be carried
out by experts. Please contact an authorised customer service
centre, your local dealer or us directly as the manufacturer.
Do not exceed the permissible maximum operating period of 40
minutes. Afterwards, allow the motor to cool down for approx.
30–40 minutes.
When unpacking the device, please check to determine whether
the power supply voltage (volts) corresponds to the device voltage on the rating plate.
Children do not recognise the risks that may arise when handling
electrical devices; therefore never leave children alone with electrical devices without proper supervision.
1. Safety
Please read and observe the following operating instructions carefully. Non-observance can
result in damage to the device as well as in
health-threatening risks for the user.
1.1 Symbols
The following two symbols are used in this manual of operating
instructions:
Safety instruction:
In case of non-observance, extreme risk of accidents exists.
General instruction:
In case of non-observance, the device can become damaged or optimum operation not be
guaranteed.
1.2 Safety Instructions
Never use the grinding mechanism to grind other products or objects. Ground material is never allowed to be fi lled into the hopper.
Do not carry out any modifi cations or changes on the grinder. In
case of non-observance, the manufacturer shall be liable for resulting damage in no case whatsoever.
4
LADENMÜHLEN | SHOP GRINDER
2. Technical Data
Description EK43, EL43, EM43,
EG43, EP43, EKK43,
EGL43, EGM43, EKM43,
EML43, EPP43
Voltage/Frequenzy 230V / 50Hz
115V / 60Hz
RPM
@ 50 Hz 1480 rpm.
@ 60 Hz 1740 rpm.
Sound emission
Idle operation 60 dB
Operation 87 dB
Pre-fuse 16 A-slow
Overload circuit breaker
230V 7A T
115V 12A T
Permissible max. operating
time of the grinder 40 minutes
Dimensions in mm
EK 43 B 230, T 410, H 770
EKK 43 B 230, T 590, H 770
Net-weight
EK 43 24 kg
EKK 43 28 kg
Hopper capacity
EK 43 1500 g
EKK 43 2 x 1500 g
(Please ask the manufacturer or dealer for technical data on other voltages and frequencies.)
Never immerse the device in water and do not
operate it with wet hands.
1.3 Purpose of Use
You can only use the grinder you have purchased to grind the
goods for which the grinder has been designed. Please make sure
that only clean and whole coffee beans are ground. Never use the
grinder to grind any other products or objects.
Example:
You can use the EGM 43 combination
grinder (with different grinders) to
grind grain on one side and poppy
seeds on the other.
1.4 User requirements
No special requirements are specifi ed for the users of this device.
It is, however, assumed that this manual of operating instructions has been carefully read and understood and that all instructions provided in this manual will be observed. In addition, working with the device on a safety-conscious basis is also expected.
5
LADENMÜHLEN | SHOP GRINDER
3. Description
The main components and operating elements are shown in the
fi gure.
Pos. 1 Hopper
Pos. 2 Adapter with hopper slider
Pos. 3 Grind adjustment
Pos. 4 Bag holder
Pos. 5 Bag holder handle
Pos. 6 Reset button
Pos. 7 ON switch “I”, green
Pos. 8 OFF switch “0”, red
Pos. 9 Base
Pos. 10 Residue tray
1
3
4
9
10
2
5
6
7
8
6
Loading...