MAGUIRE PRODUCTS INC.
SW SERIES SWEEPERS
Models:
SW-4815
SW-4820
SW-4825
SW Series Sweeper
Gaylord Sweeper Evacuation System
INSTRUCTION AND OPERATION MANUAL
Original Instructions Manual
Revision Date: February 22, 2019
Copyright Maguire Products, Inc. 2019
S W S E R I E S S W E E P E R
M A G U I R E P R O D U C T S , I N C .
2
S W S E R I E S S W E E P E R
Table of Contents
SW Series Sweeper Basic Operation ____________________________5
M A G U I R E P R O D U C T S , I N C .
Maguire Products Inc.
SW Series Sweeper
Gaylord Sweeper Evacuation System
Models: SW-4815, SW-4820, SW-4825
Sweeper Setup ______________________________________________6
Wiring Diagrams ___________________________________________11
Warranty __________________________________________________14
Technical Support and Contact Information _____________________15
3
S W S E R I E S S W E E P E R
M A G U I R E P R O D U C T S , I N C .
Copyright
2019 Maguire Products Inc.
The information contained within this manual including any translations thereof, is the property of
Maguire Products Inc. and may not be reproduced, or transmitted in any form or by any means
without the express written consent of Maguire Products Inc.
To every person concerned with use and maintenance of the Maguire SW Series Sweeper it is
recommended to read thoroughly these operating instructions. Maguire Products Inc. accepts no
responsibility or liability for damage or malfunction of the equipment arising from non-observance of
these operating instructions.
To avoid errors and to ensure trouble-free operation, it is essential that these operating instructions
are read and understood by all personnel who are to use the equipment.
Should you have problems or difficulties with the equipment, please contact Maguire Products Inc.
or your local Maguire distributor.
These operating instructions only apply to the equipment described within this manual.
Manufacturer’s Contact Information
Maguire Products Inc.
11 Crozerville Road
Aston, PA. 19014
Phone: 610.459.4300
Fax: 610.459.2700
Website: http://www.maguire.com
Email: info@maguire.com
4
S W S E R I E S S W E E P E R
M A G U I R E P R O D U C T S , I N C .
Maguire SW Series Sweeper Basic Operation
The SWEEPER gets its name from the fact that it
continuously "sweeps" the top level of the
contents of the Gaylord to the outer edges. The
material is vacuumed up the rotating vertical pick
up tube assembly, which in turn has a flexible
hose and wand assembly that rotates. As the pick
up tube assembly rotates the material is drawn up
thru the vertical portion, and into the
manufacturing process.
The motor that rotates the pick up tube is only
activated when vacuum is sensed from the users
conveying system. As the unit unloads the material
from the gaylord, the counterbalance system
allows the motor / control assembly to lower and
follow the level of the material. When the sweeper
reaches to the bottom of the gaylord, there will be
a small amount of material remaining, which can
be easily removed with the Gaylord liner and
returned to inventory.
The whole system is very portable and can be
easily transported from one location to another.
Available in six models sizes.
SW-4815 - 48-inch clearance, 1.5" (38mm) hose diameter.
SW-4820 - 48-inch clearance, 2.0" (50mm) hose diameter.
SW-4825 - 48-inch clearance, 2.5" (63mm) hose diameter.
SW-8415 - 84-inch clearance, 1.5" (38mm) hose diameter.
SW-8420 - 84-inch clearance, 2.0" (50mm) hose diameter.
SW-8425 - 84-inch clearance, 2.5" (63mm) hose diameter.
Power Requirements: 120 VAC or 230 VAC, model dependent.
Available optional Sweeper Cover that completely
covers the material in the gaylord. Part number
GLC-4848.
SW- 4815, SW-4820, SW-4825
Overall gaylord clearance up to 48 Inches
SW-8415, SW-8420, SW-8425
Overall gaylord clearance up to 84 inches
5