INTELLISTRIPE 380
USB/RS-232
DESKTOP MOTORIZED READER-ENCODER
TECHNICAL REFERENCE MANUAL
Manual Part Number 99875275-4
AUGUST 2010
REGISTERED TO ISO 9001:2008
1710 Apollo Court
Seal Beach, CA 90740
Phone: (562) 546-6400
FAX: (562) 546-6301
Technical Support: (651) 415-6800
www.magtek.com
Copyright© 2001-2010
Rev Number
Date
Notes
1
16 Oct 03
Initial Release
2
05 Nov 03
Editorial throughout. Sec 1, Configurations: changed 2 part
and related text for SAM Ranch.
3
22 Aug 07
Added Encode Coercivity Ranges to specifications to show HiCo
encode capability for 2750 Oe
4
26 Aug 10
Updated limited warranty and agency approvals; changed minimum
temperature from -40°C to -20°C
MagTek®, Inc.
Printed in the United States of Americ a
Information in this document is subject to change without notice. No part of this document may
be reproduced or transmitted in any form or by any means, electronic or mechanical, for any
purpose, without the express written permission of MagTek, Inc.
MagTek is a registered trademark of MagTek, Inc.
IntelliStripe is a registered trademark of MagTek, Inc.
USB (Universal Serial Bus) Specification is Copyright© 1998 by Compaq Computer
Corporation, Intel Corporation, Microsoft Corporation, NEC Corporation.
REVISIONS
numbers, clarified power supply description; Features: removed JIS,
to optional SAM and TRSM added “contact for further info”; clarified
Rotary Pulse Generator; Removed descriptions of TRSM, Sam
Ranch PCB, Power-on LED, Access to SAM Ranch sockets;
Specifications: changed card speed to 7-10 ips. Sec 2, Figures 2-4
and 2-5: changed part number for power cord and changed voltage
from 100-240 to 110V. Sec 3: deleted Figs 3-4, 3-5, 3-6, 3-7, and 3-8
ii
iii
SOFTWARE LICENSE AGREEMENT
IMPORTANT: YOU SHOULD CAREFULLY READ ALL THE TERMS, CONDIT I ONS AND REST RICTIONS OF THIS
LICENSE AGREEMENT BEFORE INSTALLING THE SOFTWARE PACKAGE. YOUR INSTALLATION OF THE
SOFTWARE PACKAGE PRESUMES YOUR ACCEPTANCE OF THE T E RMS, CONDITIONS, AND RESTRICTIONS
CONTAINED IN THIS AGREEMENT. IF YOU DO NOT AGREE WITH THESE TERMS, CONDITIONS, AND
RESTRICTIONS, PROMPTLY RETURN THE SOFTWARE PACKAGE AND ASSOCI AT ED DOCUMENTATION TO
THE ABOVE ADDRESS, ATTENTION: CUSTOMER SUPPORT.
TERMS, CONDITIONS, AND RESTRICTIONS
MagTek, Incorporated (the "Licensor") owns and has the right to distribute the described software and documentation,
collectively referred to as the "Software".
LICENSE: Licensor grants you (the "Licensee" ) the right to use the Software in conjunction with MagT ek products.
LICENSEE MAY NOT COPY, MODIFY, OR TRANSFER THE SOFTWARE IN WHOLE OR IN PART EXCEPT AS
EXPRESSLY PROVIDED IN THIS AGREEMENT. Licensee may not decompile, disassemble, or in any other manner
attempt to reverse engineer the Software. Licensee shall not tamper with, bypass, or alter any security features of the software
or attempt to do so.
TRANSFER: Lice nsee may not transfer the Software or license to the Software to another party without the prior written
authorization of the Licensor. If Licensee transfers the Software without authorization, all rights granted under this
Agreement are automatically terminated.
COPYRIGHT: The Software is copyrighted. Licensee may not copy the Software except for archival purposes or to load for
execution purposes. All other copies of the Software are in violation of this Agreement.
TERM: This Agreement is in effect as long as Licensee continues the use of the Software. The Licensor also reserves the
right to terminate this Agreement i f Lice nsee fails to comply with any of the terms, conditions, or restrictions contained
herein. Should Licensor terminate this Agreement due to Licensee's failure to comply, Licensee agrees to return the Software
to Licensor. Receipt of returned Software by the Licensor shall mark the termination.
LIMITED WARRANTY: Licensor warrants to the Licensee that the disk(s) or other media on which the Software is
recorded are free from defects in material or workmanship under normal use.
THE SOFTWARE IS PROVIDED AS IS. LICENSOR MAKES NO OTHER WARRANTY OF
ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.
Because of the diversity of conditions and PC hardware under which the Software may be used, Licensor does not warrant
that the Software will meet Licensee specifications or that the operation of the Software will be uninterrupted or free of
errors.
IN NO EVENT WILL LICENSOR BE LIABLE FOR ANY DAMAGES, INCLUDING ANY LOST PROFITS, LOST
SAVINGS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR
INABILITY TO USE, THE SOFTWARE. Licensee's sole remedy in the event of a defect in material or workmanship is
expressly limited to replacement of the Software disk(s) if applicable.
GOVERNING LAW: If any provision of this Agreement is found to be unlawful, void, or unenforceable, that provision shall
be removed from consideration under this Agreement and will not affect the enforceability of any of the remaining
provisions. This Agreement shall be governed by the laws of the State of California and shall inure to the benefit of MagTe k,
Incorporat ed, its successors or assigns.
ACKNOWLEDGMENT: LICENSEE ACKNOWLEDGES THAT HE HAS READ THIS AGREEMENT,
UNDERSTANDS ALL OF ITS TERMS, CONDITIONS, AND RESTRICTIONS, AND AGREES TO BE BOUND BY
THEM. LICENSEE ALSO AGREES THAT THIS AGREEMENT SUPERSEDES ANY AND ALL VERBAL AND
WRITTEN COMMUNICATIONS BETWEEN LICENSOR AND LICENSEE OR THEIR ASSIGNS RELATING TO THE
SUBJECT MATTER OF THIS AGREEMENT.
QUESTIONS REGARDING THIS AGREEMENT SHOULD BE ADDRESSED IN WRITING TO MAGTEK,
INCORPORATED, ATTENTION: CUSTOMER SUPPORT, AT THE ABOVE ADDRESS, OR E-MAILED TO
support@magtek.com.
iv
Loading...