Page 1
IntelliCAT
Utility Instructions
Installation User Support
March 26, 2014
Manual Part
99875667-1.01
REGISTERED TO ISO 9001:2008
MagTek I 1710 Apollo Court I Seal Beach, CA 90740 I Phone: (562) 546-6400 I Technical Support: (888) 624-8350
www.magtek.com
Document
Number:
Page 2
Copyright © 2014 MagTek, Inc. Printed in the United States of America
Rev Number
Date
Notes
1.01
March 21, 2014
Preliminary Release
Information in this publication is subject to change without notice and may contain technical inaccuracies or
graphical discrepancies. Changes or improvements made to this product will be updated in the next
publication release. No part of this document may be reproduced or transmitted in any form or by any means,
electronic or mechanical, for any purpose, without the express written permission of MagTek, Inc.
MagTek® is a registered trademark of MagTek, Inc.
ExpressCard 2000 is a trademark of MagTek, Inc.
MagnePrint® is a registered trademark of MagTek, Inc.
Microsoft® and Windows® are registered trademarks of Microsoft Corporation.
All other system names and product names are the property of their respective owners.
Table 0.1 - Revisions
<IntelliCAT>| <Installation User Support Document>
Page 3
<IntelliCAT>| <Installation User Support Document>
1.8 Source Name
1.X_MtAdmin.MDB
Source Path
\\share\branch1_backup\
1.X_MtAdmin.MDB
Destination File & Path
C:\Program Files\MagTek\IntelliCAT\IntelliCAT.UDL
Or
C:\Program Files
(x86)\MagTek\IntelliCAT\IntelliCAT64.UDL
ICAT Utility on Win 7 32/64bit Operator transfer
ICAT Utility Examples transferring Operators from a 1.XX DB to 2.XX DB
Go to the ‘Transfer Users to New Database’ tab
Browse to the 1.8 Source (old Access database)
Browse to destination or new database (UDL file)
Click on Upgrade button once all buttons are Green
Noted below is a screenshot of a Local Install (No old Operator folder in use):
Page 4
<IntelliCAT>| <Installation User Support Document>
Destination File & Path
C:\Program Files\MagTek\IntelliCAT\Operator.UDL
Or
C:\Program Files
(x86)\MagTek\IntelliCAT\Operator64.UDL
1.8 Source Name
1.X_OperatorMtAdmin.MDB
Source Path
\\share\branch1_backup\
1.OperatorMtAdmin.MDB
Noted below is a screenshot of a Local Install using an Operator folder:
Page 5
<IntelliCAT>| <Installation User Support Document>
Destination File & Path
\\Server1\MagTek\2.X_IntelliCAT\IntelliCAT.UDL
Or
\\Server1\MagTek\2.X_IntelliCAT\IntelliCAT64.UDL
1.8 Source Name
MtAdmin.MDB
Source Path
\\Server1\MagTek\IntelliCAT\
MtAdmin.MDB
Noted below is a screenshot of a Network Install:
The old Operators will be transferred from i.e. \\Server1\MagTek\IntelliCAT\MtAdmin.MDB to the
newly created folder \\Server1\MagTek\2.X_IntelliCAT\MtAdmin.MDB using the appropriate UDL
Page 6
<IntelliCAT>| <Installation User Support Document>
Destination File & Path
\\Server1\MagTek\IntelliCAT\2.X_Operators\Operator.UDL
Or
\\Server1\MagTek\IntelliCAT\2.X_Operators\Operator64.UDL
1.8 Source Name
1.X_OperatorsMtAdmin.MDB
Source Path
\\share\branch1_backup\
1.X_OperatorMtAdmin.MDB
Noted below is a screenshot of a Network Install using an Operator folder:
The old Operators will be transferred from i.e \\Server1\MagTek\IntelliCAT\Operator\MtAdmin.MDB to
the newly created folder \\Server1\MagTek\IntelliCAT\2.X_Operators\MtAdmin.MDB using the
appropriate UDL
\\Server1\MagTek\2.X_IntelliCAT\IntelliCAT.UDL
Or
\\Server1\MagTek\2.X_IntelliCAT\IntelliCAT64.UDL
Loading...