Magrini MT80 Instructions For Use Manual

Magrini Limited

Unit 5, Maybrook Industrial Estate, Brownhills, Walsall WS8 7DG

Tel: [phone] Fax: [phone] Email: [e-mail] Web: www.magrini.co.uk

Doc: MT8001 DATE: October 2010

INSTRUCTIONS FOR USE

Magrini Baby Changing Unit - Model MT80

Position frame on counter top.
Allow the minimum dimensions as shown.

Position unit centrally at back of the frame. Lower unit over frame. Take care to align tabs as shown.

Push unit back until the tabs engage fully. Secure with the two M5 x 30mm screws provided.

We recommend that the unit is sealed around the bottom
edge with silicone sealant.

Secure frame using the 10 gauge x 20mm screws
provided.

110mm min. 110mm min.

110mm

min.

110mm

min.

90mm min. 90mm min.

x10

x10

Pozi Pan Screws

Front of Counter

Counter Top

Back Wall

Left Hand Wall

Right Hand Wall

Engage Tabs

x2

Allen Screws

Magrini Limited

Unit 5, Maybrook Industrial Estate, Brownhills, Walsall WS8 7DG

Tel: [phone] Fax: [phone] Email: [e-mail] Web: www.magrini.co.uk

INSTRUCTIONS FOR USE

Magrini Baby Changing Unit - Model MT80

IMPORTANT: RETAIN FOR FUTURE REFERENCE. READ CAREFULLY.

This changing unit must be fixed to a counter top for safe use of the product using the fixings
supplied.
To assure proper installation, we suggest that a qualified person install this unit.
Magrini Ltd., will not be responsible if the changing station is not installed correctly.
All recommended fixings are supplied. Replacements are available free of charge from Magrini ­do not use less substantial fittings.

Tools required:

•

No.2 Pozidrive Screwdriver • Allen Key Bit (supplied)

• Drill • Silicone Sealant

Note: All assembly fittings shall always be correctly tightened and checked regularly. Screws shall not be loose

because a child can squeeze parts of the body, or clothing (e.g. strings, necklaces, ribbons for babies,
dummies, etc.) could get caught. There would be danger of strangulation.
Be aware of the risk of open fire and other sources of strong heat, such as electric bar fires, gas fires etc.
in the near vicinity of the unit.

2 No. Allen Screws
M5 x 30

Cleaning Instructions

The nappy changing unit may be
washed and wiped with a damp
soft cloth or sponge. Use of mild
detergent and warm water will
remove the majority of dust and stains.
For more obstinate stains a domestic
cream cleaner can be used. Do not use
any abrasive cloths, caustic or solvent
cleaners as these may damage the unit.

Maintenance Instructions

Check that the unit is securely fixed to the counter.
Ensure warning label is in place on the inside of the unit and general cleanliness is within
given guidelines.
Any replacement parts must be obtained from Magrini only.

WARNING: DO NOT LEAVE THE CHILD UNATTENDED.

Intended for use for children up to a maximum weight of 15kg.
Do not use the changing unit when any part is broken, torn or missing.

Changing Unit Fixing Parts (supplied):

10 No. Pozi Pan Head Screws
10 Gauge x 20mm