Magnus DWF-2 User manual

DWF-2

DWF-2

Owner’s

Manual

Universal Dolly

Using your

DWF-2

DWF-2

Universal Dolly

Dolly Components

1

1. Dolly consists of 3 long bars with a wheel attached
on one end and a handle 1 on the other. Swing outer
two bars upward until they lock in handle. Middle
bar stays stationary.

2. Adjust the sliding tripod foot clamp support 2 on
each bar to fit tripod footprint and lock knob on side
of each bar.

3. Turn long screw knob 3 clockwise on each foot
support to tighten tripod to bar clamps.

4. Lock wheels by stepping on metal tab 4 at the end
of each wheel.

5. Unlock wheels by pushing small metal tab 5 on
each wheel upward.

6. To fold dolly, pull up knobs 5 on either side of
handle. Long bars will release to a closed position.

5

3

4

5

5

2

Specifications:

Maximum load: 33 lbs. (15 kg)
Folds to 17″ x 5″ (43.2 x 12.7 cm)
Doorway width: 31″ (78.7 cm)
Wheel diameter: 2″ (5.1 cm)