The use of this manual and the conditions or methods of installation,
operation, use, and maintenance of the MM-R and MM-RC Remote
Controls are beyond the control of Magnum Energy, Inc. Therefore,
this company assumes no responsibility and expressly disclaims
any liability for loss, damage, or expense whether direct, indirect,
consequential, or incidental that may arise out of or be in anyway
connected with such installation, operation, use, or maintenance.
Due to continuous improvements and product updates, the images
shown in this manual may not exactly match the unit purchased.
Restrictions on Use
The MM-R and MM-RC Remote Controls shall not be used in
connection with life support systems, life saving or other medical
equipment or devices. Use at your own risk.
Contact Information
Magnum Energy, Inc.
2211 West Casino Rd.
Everett, WA 98204
phone: (425) 353-8833/fax: (425) 353-8390
web: www.magnumenergy.com
Product Safety Instructions
Read and follow all instructions and safety information contained in
this manual before installing or using this product.
• All electrical work must be performed in accordance with local,
state, and federal electrical codes.
• This product is designed for indoor/compartment installation. It
must not be exposed to rain, snow, moisture, or liquids of any type.
• Use insulated tools to reduce the chance of electrical shock or accidental short circuits.
• Always verify proper wiring prior to connecting the remote.
Safety Symbols
To reduce the risk of electrical shock, fi re, or other safety hazard,
the following safety symbols have been placed throughout this
manual to indicate dangerous and important safety instructions.
WARNING: Indicates that failure to take a specifi ed
action could result in physical harm to the user.
CAUTION: This symbol indicates that failure to
take a specifi ed action could result in damage to the
equipment.
Info: This symbol indicates information that emphasizes
Congratulations on your purchase of the MM-R and/or MM-RC
remote controls from Magnum Energy, Inc. These remotes are designed to be simple to install and use, and enable easy control and
quick indication of the inverter’s (and charger’s) status.
Remotes Available
The MM-R and the MM-RC are the two remote controls available for
use with the MM/MM-AE Series inverter. The appropriate remote to
use depends on whether your inverter includes the battery charger
feature. For the MM Series inverter that does not have the battery
charger, the MM-R is the recommended remote; for MM/MM-AE
Series inverters that do have the battery charger, the MM-RC is
recommended.
The MM-R and MM-RC remotes offer the following features:
MM-R - Provides three LED indicators for inverter status, and
includes a remote ON/OFF switch. The unit comes with 25’ cable.
This remote is for the MM612 model (requires serial number L1201 or higher).
MM-RC - Provides six LED indicators for inverter and charger sta-
tus, and includes a remote ON/OFF switch. The unit comes with 25’
cable. This remote is for the MM1212, MM612AE, MM1512AE, and
MM1524AE models.
MM-RC
ON/OFF
BULK
ABSORB
FLO A T
INVERT
AC IN
FA U L T
MM-R
ON/OFF
IN V E RT
AC IN
FA U L T
Figure 1, MM-R and MM-RC Remote Controls
Basic Features
•Colored LED’s (Light Emitting Diodes) located on the front panel
for easy viewing of system status.
• A RJ11 phone jack connection for easy connection to inverter.
• Status and information indicators used to determine system performance and operating conditions, including: inverter operation,
charger operation and any faults that occur.
• ON/OFF push button for easy control of inverter and charger
operation.
• Easy installation – can be fl ush mounted (in the wall) or use
the included mounting ring to give installers the option of surface
mounting (on the wall).