Magnum Dynalab MD-306 User Manual
Magnum Dynalab MD 306
HYBRID INTEGRATED AMPLIFIER
INSTRUCTION MANUAL
- -
2
TABLE OF CONTENTS
TABLE OF CONTENTSDEAR VALUED CUSTOMER .......................................................... 2
DEAR VALUED CUSTOMER .............................................................................................. 3
UNPACKING YOUR MD 306 HYBRID INTEGRATED AMPLIFIER ................................... 4
SETTING UP THE MD 306 HYBRID INTEGRATED AMPLIFIER ...................................... 5
CONNECTING ADDITIONAL SOURCES TO THE MD 306 HYBRID INTEGRATED AMPLIFIER .. 5
SET UP THE MD 306 HYRBID INTEGRATED AMPLIFIER WITH AN EXTERNAL HOME
THEATER PROCESSOR ............................................................................................ 7
HOOKING UP A SUBWOOFER TO YOUR SYSTEM ......................................................... 7
OPTIONAL DIGITAL AUDIO CONVERTER (D.A.C) ........................................................... 9
A6 REMOTE CONTROL .................................................................................................... 10
CONTROL/DISPLAY FUNCTIONS ............................................................................ 11
DIAGRAM OF MD 306 HYBRID INTEGRATED AMPLIFIER ........................................... 12
TROUBLE SHOOTING ....................................................................................................... 13
SPECIFICATIONS .............................................................................................................. 14
SAFETY SHEET ................................................................................................................. 15
LIMITED WARRANTY ...................................................................................................... 16
- -
3
Dear Valued Customer
Thank you for choosing the Magnum Dynalab
Great care has been given to the design, manufacturing and selection of
components for the
insures optimum listening enjoyment for many years.
When using these high grade components, a considerable length of time is required
for the
high quality break-in disc or white noise from a FM tuner will help ensure optimum
performance as quickly as possible.
Once again, thank you for including a MAGNUM DYNALAB product in your
entertainment system. We are sure that you will have years of listening pleasure
from your
product at www.magnumdynalab.com, and if there is anything else we can do,
please call us on our toll free number, 1-800-551-4130, or contact us via email:
info@magnumdynalab.com.
Respectfully yours,
Larry Zurowski
President
MD 306 Hybrid Integrated Amplifier
MD 306 Hybrid Integrated Amplifier
MD 306Hybrid Integrated Amplifier
MD 306 Hybrid Integrated Amplifier
. This complete process
to reach its full potential. Using either a
. Please be sure to register your
.
- -
4
UNPACKING YOUR MD 306 HYBRID INTEGRATED AMPLIFIER
Carefully inspect all sides of the shipping carton for damage. If there are marks or
holes in the carton make note of the location in relation to the unit inside. Any
obvious dents or scuff marks should alert you to the possibility of damage. Carefully
remove the MD 306 Hybrid Integrated Amplifier from the end caps and wrapping,
inspect all sides. Pay special attention to the corresponding areas on the unit where
damage was found to the shipping carton. If damage is evident, document the type
and extent of the damage, then repack the unit and call the dealer.
KINDLY DO NOT SEND THE UNIT BACK TO THE SHIPPER UNTIL YOU HAVE BEEN
ASKED TO DO SO.
DO NOT DISCARD THE PACKING MATERIALS AND CARTONS. Should there be a
necessity to return the unit for any reason, it must arrive safely and suitably
packaged in order for our receiver to accept it from the carrier. If the unit has
incurred damage as a result of improper packaging, it is not likely that a claim for
the damage against the carrier will be successful.
Likewise, we will ship your unit back to you only in factory-approved packaging,
however, if the unit were to arrive at the factory on anything other than factory
approved packaging, we reserve the right to return the unit in factory-approved
packaging and charge the cost of the packaging to the shipper. This is the only way
we can assure you of a safe return (damage by carrier excepted).
- -
5
SETTING UP THE MD 306 HYBRID INTEGRATED AMPLIFIER
1. Position the unit away from any spot which may have extremes in temperatures.
2. Place the unit on a very rigid surface capable of holding 75 pounds (34 KG).
3. The heat sinks located inside the unit are used to keep the unit at a safe
operating temperature. It is important that they are not covered and that the unit
is not installed in a closed area where there is little air circulation. Ensure at
least 2” of clearance on the left and right of the device, and 5” of clearance
above the unit to allow for proper ventilation.
4. Unwrap the EIA AC cord and plug the EIA end into the rear socket marked
Input
. Plug the other end of the AC cord into a 120/220/230/240 volt
continuous AC power supply. Be sure that the voltage marked on the rear of the
unit is the same as the AC source that you are using.
5. Hook up your speakers to the back of the unit insuring that the positive (+)
terminal on the speaker is hooked up to the positive (+) output terminal on the
MD 306, likewise that the negative (-) is correctly hooked up. Be sure that all the
connections are tightly affixed.
6. Turn on the power switch on the front panel
Power
CONNECTING ADDITIONAL SOURCES TO THE MD 306 HYBRID INTEGRATED
AMPLIFIER
CAUTION
As standard practice, you should always turn off the main power to the MD 306
Hybrid Integrated Amplifier whenever any source component, interconnect or
loudspeaker is being changed in your system.
1. Using your RCA cables, balanced XLR cables, coaxial, optical or USB, plug the
source(s) into one of the inputs marked in the back of the MD 306.
2. Power up you Hybrid Integrated Amplifier and set the input to match the input on
the rear of the unit that the other source is plugged into.
- -
6
3. With volume set to zero, power up the source, initialize the playback, and slowly
adjust volume to desired level.
Loading...