Compact 10 Meter Mobile Transceiver
• PLL Controlled Transceiver
• 28.000 to 29.695 MHz Frequency Range
• 4 Watts RF Output Power
• AM
• 10 kHz Steps
• 2 Digit Channel Display
General Specifications
Frequency Coverage : Transmit and Receive ............................................28.000 - 29.695 MHz
Modes : AM
Antenna Impedance : 50 ohm, unbalanced
Operating Temperature : -20 0C to +60 0C
Frequency Control : Phase-Lock Loop (PLL) Synthesizer
Power Requirement : 12 - 13.8 V DC, negative ground
Dimensions (W x H x D) : 130 x 34 x 180 mm (5.1 x 1.3 x 7 in)
Weight : 0.8 kg (1.75 lbs)
Transmitter Specifications
Power Output : AM ..........................................................4 Watts Carrier / 10 Watts PEP
Spurious Emissions : More than 50 dB below peak output power
Frequency Response : 400 to 2800 Hz
Microphone Impedance : ECM, 600 to 1K ohms
Receiver Specifications
Circuit Type : Double-Conversion Superheterodyne
Intermediate Frequencies : 1st IF .................................................................................... 10.695 MHz
: 2nd IF ......................................................................................... 455 kHz
Sensitivity : AM .....................................................................1.0 uV at 10 dB S + N/N
Selectivity : AM ....................................................... 6.0 kHz (-6 dB) / 18 kHz (-60 dB)
Adjacent Channel Rejection : Better than 65 dB
IF Rejection : Better than 65 dB for all frequencies
Frequency Response : 250 to 3000 Hz
Audio Output Power : 2 watts minimum at 10% THD with an 8 ohm load
Audio Output Impedance : 8 ohms
• ECM Microphone
•LED Display
• Transmit & Receive LEDs
• On/Off Volume Control
• Squelch Control
• Call Channel Control
• MARS / CAP Compatible (Permits Required)
• 1 Year Warranty