Magnum MFM-FS, MFM-VS Product Instruction Manual

Product instruction manual Magnum® MFM-FS Folding System Fixed Speed
Magnum Folders have been designed to be user friendly, however we strongly recommend you take a few minutes to read through this manual to ensure correct operation.
Keep this manual safe for future reference.
2
Page 2 - Specications
Page 3 - Introduction
Page 4 - Safety Instructions and environmental requirements
Page 5 - Information before use
Page 6 - Parts
Page 7 - Operation panel and functions
Page 8 - How to use
Page 14 - Warranty and incorrect use
Contents
Paper Size 125 x 176mm (B6) to 297 x 420mm (A3)/5 x 7” to 11 x 17”
Paper Weight up to 220gsm single folding, up to 135gsm multiple folding
Paper Quality Woody paper, high-quality paper, high-quality paper for stencil printing,
medium-quality paper
Fold Type Single, Double parallel, Letter, Gate, Zig-Zag, Fold-out
Paper Feed System Friction roller feed system
Max. Stacking Capacity 500 sheets
Folding Speed 50-200 sheets per minute
Operating Method Digital key input
Power Supply Required 13 Amps
Power Supply 220/240 V / 110-120 V
Rate Input Power 50W
Frequency (Hz) 50-60Hz
Dimensions 610 x 580 x 450mm
Gross Weight 29Kg
Specications
3
Thank you for purchasing the Magnum MFM-FS Folding System.
This system enables users to achieve greater eciency in clerical work by releasing them from paper-folding work that has manually been performed in the past.
Please read these instructions carefully before starting to use the system to ensure you get the best results and are competent at operation.
Should you experience any problems please contact your supplier.
Introduction
4
Safety Instructions
Make sure that the system is electrically grounded. This prevents an electric shock when there is a leak
of electricity.
Use the system at 110 – 120 VAC, 220 – 240 VAC with a frequency of 50Hz to 60Hz. A re may start or
the system may break down if a higher or lower voltage is used, or if an electric current with a
frequency that is not within the range of frequency stated above.
Do not place any objects on this system. A re may start or electricity may leak if water or a foreign
object enters the system.
Handle the power cord with care. A re may start or an electric shock may be caused if the cord is
damaged, broken, or processed, if a heavy object is placed on the cord, or if the cord is bent forcibly.
Do not pull the power plug out of or put it in the electric outlet using a wet hand.
Otherwise, an electric shock may be caused.
Do not remove the cover of this system. Otherwise, an electric shock or injury may be caused.
Do not remodel this system. Otherwise, a re may break out or an electric shock may be caused.
If the system is used when it is in an abnormal condition, such as generating heat, emitting smoke,
and giving out a strange smell, a re may break out or an electric shock may be caused. Turn o the
power switch immediately and then pull the power plug out of the electric outlet. Afterwards, report
the fault to your supplier.
If abnormalities such as the power cord generating heat and giving out a strange smell are found,
turn o the power switch immediately and then pull the power plug out of the electric outlet.
Afterwards, report the fault to your supplier.
If a foreign object enters the system, turn o the power switch rst and then pull the power plug out
of the electric outlet. Afterwards, report the fault to your supplier.
If thunder approaches, pull the power cord out of the electric outlet to prevent a re or breakdown
caused by the falling of a thunderbolt.
Do not let hairs, a necktie or necklace hang above the drive of the system.
Doing so may cause an injury.
Do not put the system on an unstable place such as a shaky stand or a slanted oor. Doing so may
cause the system to drop or fall down, causing an injury.
Do not put the system in a moist or dusty place. Doing so may start a re or cause an electric shock.
Be sure to pull out the power cord while holding the plug. If the power plug is pulled out while
holding the cord, a re may break out or an electric shock may be caused.
Be sure to pull the power plug out of the electric outlet rst when moving this system.
Otherwise, the cord may be damaged, causing a re or an electric shock.
Be sure to pull the power plug out of the electric outlet for safety purposes when this system is not
used for consecutive holidays or for other reasons.
5
Check accessories immediately after unpacking. Should an item be missing, contact your supplier.
Also, check if the warranty has the dealer’s signature and the date of purchase is mentioned.
Accessory Quantity
Table 1 1
Table 2 1
Power Cable 1
System cover 1
Instruction Manual 1
Information Before Use
1. Precautions on Installation
Do not install it in an unstable place such as on a faltering bench or an inclined place.
It may fall down or drop and cause an injury.
Do not install it in a dusty place or a place of high humidity.
It may cause a re, or an electric shock.
Do not install it in a place exposed to direct sunlight.
Avoid a location near a window.
It should be used at an ambient temperature of 5 to 35°C.
Do not install it in a location close to heating equipment.
Do not install it in a place exposed to a direct wind.
2. Checking Accessories
i
Loading...
+ 9 hidden pages