Magneti Marelli S p A RKE192 User Manual

USER MANUAL STATEMENT LETTER

Date: June 18, 2014

Re: Certification for Keyless entry system
FCC ID: RX2RKE192

The device under test is manufactured by the grantee (
47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee must ensure the car manufacturer has all applicable
/appropriate operating instructions.

When end-user instructions are required, the grantee must notify the OEM to notify the end-user.

MAGNETI MARELLI S.p.A.

what must be included in the end user’s manual for the commercial product:

INFORMATION TO BE INCLUDED IN THE END USER'S MANUAL
The following information must be included in the end product user’s manual to ensure continued FCC

regulatory compliance.

************************************************************************

will supply the following information to the reseller/distributor (car manufacturer) dictating

MAGNETI MARELLI S.p.A.

) and sold as an OEM product. Per

Modification statement

Magneti Marelli has not approved any changes or modifications to this device by the user. Any changes or modifications

could void the user’s authority to operate the equipment.

Interference statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.

************************************************************************

It is preferred that the following ID numbers be included in the manual if the device label is not
readily accessible to the end user.

************************************************************************

FCC ID: RX2RKE192

************************************************************************

The following information should be provided to the end user by citation in the manual.

************************************************************************

Radiation exposure statement

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC

radio frequency Exposure Guidelines in Supplement C to OET65. This transmitter must not be co-located or operating in

conjunction with any other antenna or transmitter.