Magnetic Products MT Series User Manual
Application: MPI's MAGNETIC TUBES (MT Series)
are commonly used to remove small to medium size
ferrous tramp metal contaminant from a variety of
product streams. Typical uses include removing
metallic grit from hydraulic reservoirs to minimize wear
on the machine's seals and bushings. Another typical
use is for removing unwanted ferrous contaminant’s in
food and chemical processing systems, thus improving
product quality standards.
Operation: The product stream flows around one or
more 1" diameter magnetic tubes located within the
product stream that are attached to their housing via
the tapped end holes. As tramp metal contanimants are
captured, they move to the underside of the tubes,
eliminating tramp metal “wash-off”.
MT Series magnetic tubes are easy to install and clean.
They offer an efficient and economical ferrous metal
filtration protection of your processing equipment.
The tubes may be used as individual units or part of
multiple row arrangements, such as 2 row, 3 row, or 4
row. And when using a multiple row arrangement the
tube rows should be on 2" centers with the rows
staggered for maximum magnetic separation.
Magnetic Tubes
Series: MT
1" DIAMETER
¼"-20 X
3
/8" DEEP
TAPPED HOLE
(EACH END)
304 STAINLESS STEEL TUBE
Model Shown
MT-110
MPI Homepage
Our Services
Contact Us
Providing Magnetic Solutions
For the Material Handling Industry
Magnetic Products Inc.
P.O. Box 529 •683 Town Center Dr. •Highland, MI •48357
TOLL FREE:
800-544-5930 • 248-887-5600
FAX
:
248-887-6100
EMAIL:
info@mpimagnet.com
www.mpimagnet.com
DISTRIBUTED BY:
PRODUCT BULLETIN GROUP: 102
SERIES: MT, REV. 06/04
© COPYRIGHT 1995 MPI
-Custom Sizes & Configurations Available-
For more information, please contact your local sales representative or our customer service representatives at
1-800-544-5930 or info@mpimagnet.com.
Standard Features:
• Powerful Ceramic magnet material
• Complete seam welded tube ends
• 304 Stainless Steel tube
• ¼" - 20x 3/8” tapped mounting holes
Optional Features:
• High energy rare earth magnet material
• Non-standard alloy stainless steel enclosures
• Custom tapped mounting holes
• Custom tube lengths
• Quick-Clean designs
• Heavy-duty designs available for receiving area
applications
• High temperature magnet materials
• Abrasion resistance coatings
A
¼ - 20 x ¼" DEEP
TAPPED HOLE
(EACH END)
1.0" DIAMETER
TUBE LENGTH “A” APPROX. UNIT'S WEIGHT
MT MODEL NUMBER
IN. MM LBS. KG
MT-104 4.0 102 .75 .3
MT-106 6.0 152 1.12 .5
MT-108 8.0 203 1.50 .7
MT-110 10.0 254 1.87 .9
MT-112 12.0 305 2.24 1.0
MT-114 14.0 356 2.62 1.2
MT-116 16.0 406 2.99 1.4
MT-118 18.0 457 3.37 1.5
MT-120 20.0 508 3.74 1.7
MT-122 22.0 559 4.11 1.9
MT-124 24.0 610 4.49 2.0
MT-SERIES SELECTION GUIDE
Note: Specifications subject to change
Loading...