Magnetic Products ILMT Series User Manual
Application: MPI INLINE MAGNETIC TUBES (ILMT series)
offer an economical yet effective way to protect
products conveyed in dry bulk or liquid process lines
from unwanted tramp metal contamination. Multiple
ILMT magnets can be placed into a product process
chute, spout or pipe to provide even greater magnetic
filtration. ILMT magnets are an ideal solution for exist-
ing process lines that are not easily modified to accept
conventional magnetic separation equipment such as
Plate, Grate or Drawer magnets.
Operation: Installation of the ILMT magnet is quick &
easy. Simply drill an access hole into the existing
process line then weld the ILMT magnet housing in
place. As product travels past the magnet Tube, tramp
iron collects on the powerful Rare Earth permanent
magnet now protruding into the process line. A quick
release clamp on the magnet housing is included to
enable quick removal & replacement of the magnet
during regular inspection & cleaning.
Inline Magnetic Tube
Series: ILMT
Model Shown
ILMT-10-REN
100% 304 stainless steel
welded construction
No tools required to operate quick
release clamp for magnet cleaning
EXPANDED VEIW
MPI Homepage
Our Services
Contact Us
Providing Magnetic Solutions
For the Material Handling Industry
Magnetic Products Inc.
P.O. Box 529 •683 Town Center Dr. •Highland, MI •48357
TOLL FREE:
800-544-5930 • 248-887-5600
FAX
:
248-887-6100
EMAIL:
info@mpimagnet.com
www.mpimagnet.com
DISTRIBUTED BY:
PRODUCT BULLETIN GROUP: 102
SERIES: ILMT, REV. 05/05
© COPYRIGHT 1995 MPI
-Custom Sizes & Configurations Available-
For more information, please contact your local sales representative or our customer service representatives at
1-800-544-5930 or info@mpimagnet.com.
Standard Features:
• 100% 304 stainless steel welded construction
• Powerful Rare Earth permanent magnet
• Available in standard sizes from 4” – 12” long
• No tools required to operate quick release clamp for
magnet cleaning
Optional Features:
• 316-L stainless steel construction
• Synergistic coated magnetic Tube for abrasive and/or
sticky products
• AAA sanitary welded construction
• Non-standard magnet tube lengths to fit any size
application
Inline Magnetic Tube Selection
Model ILMT-04-REN ILMT-06-REN ILMT-08-REN ILMT-10-REN ILMT-12-REN
A 4 inches 6 inches 8 inches 10 inches 12 inches
MAGNET AREA HANDLE
QUICK RELEASE CLAMP
Note: Specifications subject to change
1.87 I.D.
A
2.518
O.D.
3.00
0.250
1.00
6.00
9.25
Loading...