Magnetic Products AMG Series All User Manual
Application: MPI's ALL MAGNETIC GRATE (AMG
series) magnets provide tramp metal protection in a
wide variety of free-flowing product streams. They are
ideal for use in gravity-fed vertical chutes, hoppers,
receiving areas, and catch bins. AMG grate magnets
are easy to install and offer efficient, economical
magnetic protection of processing equipment used in;
grain milling, plastics molding and extruding or other
machinery from damage caused by tramp metal, plus at
the same time improve or maintain product quality
standards.
Operation: The product stream flows through two
rows of magnetized 400 series stainless steel magnetic
diverters. The diverters are seam welded to the
non-magnetic stainless steel magnetic element
housing. Tramp metal contaminants are captured and
retained over the entire grate surface, providing 100%
contact with the magnetic area.
Quick-Cleaning ALL-MAGNETIC GRATES (AMG-QC
Series) are cleaned by simply removing the magnetic
elements from the element housing, demagnetizing the
entire frame and allowing the tramp metal to fall off the
diverters.
Standard All-Magnetic Grates (AMG Series) are lower in
cost, but require more time-consuming manual
cleaning.
Series: AMG
All Magnetic Grate
HEAVY-DUTY ALL WELDED
CONSTRUCTION
ALL SURFACES
100% MAGNETIZED
TYPE HD-2 90° DIVERTERS, TWO
STAGGERED ROWS
1" SPACING BETWEEN DIVERTERS
REMOVABLE
MAGNETIC
ELEMENT
Model Shown
AMG-6R-QC (Quick Clean)
MPI Homepage
Our Services
Contact Us
Providing Magnetic Solutions
For the Material Handling Industry
Magnetic Products Inc.
P.O. Box 529 •683 Town Center Dr. •Highland, MI •48357
TOLL FREE:
800-544-5930 • 248-887-5600
FAX
:
248-887-6100
EMAIL:
info@mpimagnet.com
www.mpimagnet.com
Standard Features:
• Powerful Ceramic permanent magnet
• 100% stainless steel enclosed design
• Two rows of diverters on 2" centers
• Rugged all-welded construction
Options:
• High-energy rare earth magnet material
• Non-standard diverter spacing
• Non-standard alloy stainless steel enclosures
• Special sizes and mounting available
DISTRIBUTED BY:
PRODUCT BULLETIN GROUP: 102
SERIES: CC, REV. 04/04
© COPYRIGHT 1995 MPI
Selection:
MPI's All-Magnetic Grates are available in either Standard or Quick-Clean models. Quick-Cleaning models feature removable
magnetic elements, which act as a magnetizer for the grate. Grates from 4" through 8" in size (square or round) have one
magnetic element, grates from 10" through 14" have two elements, and grates from 16" and above have three magnetic elements.
Utilize the selection specifications below to help you order the model of grate magnet that best fits your application. When
ordering be sure to specify width, length, or diameter, and whether you require a standard or quick-clean design.
As a leader in the development of Magnetic Separation Equipment, MPI is committed to the continuous design and performance
improvements of their products. This commitment to excellence is made to you with engineering services, such as free product
testing and assistance in selecting the proper magnetic separator for your application. For more information please contact your
local sales representative or contact our factory.
LENGTH
DIAMETER
WIDTH
3"
3"
AMG-44 4 X 4 1 AMG-6-R 6 1
AMG-66 6 X 6 1 AMG-8-R 8 1
AMG-88 8 X 8 1 AMG-10-R 10 2
AMG-1010 10 X 10 2 AMG-12-R 12 2
AMG-1212 12 X 12 2 AMG-14-R 14 2
AMG-1414 14 X 14 2 AMG-16-R 16 3
AMG-1616 16 X 16 3
Note: Magnetic Grates should be sized to 2 times
larger than hopper outlet opening.
Specifications subject to change. Special sizes available upon request.
AMG-1818 18 X 18 3
AMG-2020 20 X 20 3
SQUARE MODEL
NUMBERS
LENGTH X WIDTH
(INCHES)
NUMBER OF MAGNETIC
ELEMENTS
ROUND MODEL
NUMBERS
DIAMETER
(INCHES)
NUMBER OF MAGNETIC
ELEMENTS
AMG - SERIES SELECTION GUIDE
NOTE:
BOTTOM ROW OF
DIVERTERS NOT
SHOWN FOR CLARITY
SQUARE ROUND
Note: Specifications subject to change
Loading...