Magnavox ZV427MG9 User Manual

Owner's Manual

ZV427MG9

IGITAL VIDEO DISC RECORDER WITH

IDEO CASSETTE RECORDER

Introduction

Connections Basic Setup Function Setup VCR Functions

THANK YOU FOR CHOOSING MAGNAVOX.

EED HELP FAST?

READ YOUR QUICK GUIDE AND/OR OWNER'S MANUAL FIRST FOR QUICK TIPS THAT MAKE USING

YOUR MAGNAVOX PRODUCT MORE ENJOYABLE.

IF YOU HAVE READ YOUR INSTRUCTIONS AND STILL NEED ASSISTANCE,

YOU MAY ACCESS OUR ONLINE HELP AT HTTP://WWW.FUNAI-CORP.COM

OR CALL 1-800-605-8610 WHILE WITH YOUR PRODUCT.

INSTRUCCIONES EN ESPAÑOL INCLUIDAS.

Recording Playback Editing

Others Español

OUT IN

DVD

DIGITAL

AUDIO OUT

AUDIO

OUT

S-VIDEO

/CB

PR /CR

RLR

S-VIDEO IN --- AUDIO --- OUT

IN --- VI D E O --- OUT

COMPONENT

VIDEO OUT

DVD/VCR

rear of your TV

external tuner

ANT. IN

rear of this unit

AUDIO IN

VIDEO IN

AUDIO OUT

VIDEO

OUT

S-VIDEO

OUT

RF coaxial cable

e.g.)

TV signal

S-VIDEO IN --- AUDIO --- OUT

IN --- VIDEO --- OUT

DVD/VCR

RCA audio cable

RCA video cable

S-video cable

RF coaxial cable

STANDBY-ON

TIMER SET

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACETIMER CLEAR

SETUPDISC MENU

RETURNTITLE

TRACKING

VCRHDMI DVD

AUDIOREC

REC MODE D.DUBBING

CM SKIP

SEARCH RAPID PLAY

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

General Setting

Playback Display Video Recording Clock HDMI Reset All

Progressive Scan TV Aspect Video Input

Video Input

E1 (Rear) E2 (Front)

General Setting

Playback Display Video Recording Clock HDMI Reset All

Progressive Scan TV Aspect Video Input

Video Input

E1 (Rear) E2 (Front)

E1 (Rear)

Video In S-Video In

DIGITAL VIDEO DISC RECORDER WITH

VIDEO CASSETTE RECORDER

ZV427MG9

Connection to an External Tuner

1) Disconnect the power cords of the devices from the AC outlet.

2) Make the connection as illustrated below.

Connections

Playable Discs

DVD-video

DVD+RW

DVD+R

DVD-RW (Finalized video mode discs only)

DVD-R (Finalized video mode discs only)

is a trademark of DVD Format/Logo Licensing Corporation.

Region Codes

This unit is compatible to play back the following discs / files.

LogosPlayable discs LogosPlayable discs

CD-DA (audio CD)

video CD

CD-RW

CD-R

CD-DA

MP3

MediaPlayable les

CD-RW/-R

3) Plug in the power cords of the devices to the AC outlet.

How to Select External Input Channel on Your TV

After you have completed the connections, switch the input selector on your TV to an appropriate external input channel. Press a button on the TV’s original remote control that selects an external input channel until the DVD recorder’s opening picture appears. Check your TV owner’s manual for details.

Settings for the Video Input

You must let the unit know which video input jack you are using before making a recording.

Press [SETUP] and use [K / L] to select “General Setting”, then press [OK].

The number inside the globe refers to region of the world. This unit can playback DVD that are labeled for ALL regions or for Region 1.

Recordable Discs

•

Following discs are recommended for good recording quality and

are proven to be compatible with this unit. However, depending on the media condition, the unit may not read the disc properly.

Verbatim DVD+R 8x, DVD+RW 4x, DVD-R 8x, DVD-RW 2x JVC DVD-RW 4x Maxell DVD+R 4x/8x/16x, DVD-R 8x/16x SONY DVD+R 4x/8x/16x, DVD+RW 4x TDK DVD+R 4x/8x/16x

Performance of any other discs are not guaranteed.

• You can play back DVD+RW on most DVD players without

finalizing. However, if you have added or deleted chapters, or made chapters hidden, you must perform “Make Edits Compatible” before being able to see those effects on other units. (Refer to page 69 in the owner's manual.) To play back discs other than DVD+RW on other DVD players, you will need to finalize.

Unrecordable Discs

Printed in China 1VMN25334 / E9E8BUD_QG ★★★★★

Use [K / L] to select “Video”, then press [OK].

This unit can record to DVD+RW, DVD+R, DVD-RW and DVD-R. DVD+R/DVD-R can only be recorded to once. DVD+RW/DVD-RW can be recorded to and erased many times.

DVD-RW/-R will be recorded in the DVD+VR mode automatically in this unit.

Logo

DVD+RW DVD+R

• DVD-RW recorded in the mode other than +VR is not recordable on this unit unless you erase all contents in the disc. (Refer to page 68 in the owner's manual.)

• DVD-R recorded in the mode other than +VR is not recordable on this unit.

DVD-RW

DVD-R

8cm/12cm, single-sided, single layer disc Approx. max. recording time (SLP mode): 360 minutes (4.7GB) (for 12cm) 108 minutes (1.4GB) (for 8cm)

Attributes

SETUP

Use [K / L] to select “Video Input”, then press [OK].

Use [K / L] to select desired external input position, then press [OK].

Use [K / L] to select the input jack type to connect, then press [OK].

Press [SETUP] to exit.

Proceed to the back side of this sheet.

0:30

2 Initial Setting

Initial Setup

OSD Language

English

Français

Español

SP(2Hr) 0:58

Initial Setup

Clock Setting

- - - / - - / - - - - ( - - - )

- - : - - - -

Initial Setup

Clock Setting

JAN / 01 / 2008 ( TUE )

12 : 00 AM

STANDBY-ON

TIMER SET

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACETIMER CLEAR

SETUPDISC MENU

RETURNTITLE

TRACKING

VCRHDMI DVD

AUDIOREC

REC MODE D.DUBBING

CM SKIP

SEARCH RAPID PLAY

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

Timer Programming

TUE JAN/01 11:00AM

Date Start End E1/E2 New Program

STANDBY-ON

TIMER SET

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACETIMER CLEAR

SETUPDISC MENU

RETURNTITLE

TRACKING

VCRHDMI DVD

AUDIOREC

REC MODE D.DUBBING

CM SKIP

SEARCH RAPID PLAY

PQRS

SOURCE

123

456

+--

iji

DISP LAY OPEN/CLOSE

NB558

STANDBY-ON

TIMER SET

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACETIMER CLEAR

SETUPDISC MENU

RETURNTITLE

TRACKING

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

STANDBY-ON

3 – 2 Timer Recording

You need to follow these steps when you turn on this unit for the first time.

Press [STANDBY-ON y].

Turn on the TV. Select the input to which the unit

is connected.

Use [K / L] to select your desired language, then press [OK] to set language.

s B

Press [OK] to activate “Clock Setting”.

Use [{ / B] to select an item to set, and use [K / L] to select the contents to suit your preference, then press [OK].

3 DVD Recording

You can program the unit to record up to 12 programs within one month in advance. Daily or weekly program recordings are also available.

Before recording, make sure

• Connect the external tuner to either E1 or E2 and set it to output audio/video signals when it comes to the time you want to start recording.

• Do not change the external tuner’s channel while you are recording. You cannot watch one channel and record another at the same time.

• Set the clock before setting a timer programming.

• Insert a recordable disc with enough recordable space or a cassette tape with a erase-protection tab.

Press [TIMER].

1 2

Use [K / L] to select “New Program”, then press [OK].

Set a timer programming.

TIMER SET

TIMER

3 – 1 Basic Recording

Press [DVD].

Press [OPEN/CLOSE A] to open the disc tray

and insert your disc with its label facing up.

* Make sure the disc is compatible with this unit. (Refer to page 24 in

the owner's manual for the list of compatible discs.)

Press [REC MODE] to select a recording mode.

Press [SOURCE] to select the appropriate external

input position (E1/E2) to which your external tuner is connected. Then select the desired channel to record on the external tuner.

Press [REC I] to start recording.

Press [STOP C] to stop recording.

Recording

mode

HQ (1Hr)

SP (2Hr)

SPP (2.5Hr)

LP (3Hr) EP (4Hr)

SLP (6Hr)

SOURCE

60 min

Video/sound

quality

Good

Poor

REC

REC MODE

Recording

time

8cm Disc 12cm Disc

18 min 36 min 45 min 54 min 72 min

108 min

120 min 150 min 180 min 240 min 360 min

To set one-touch timer recording (OTR)...

This is a simple way to set the recording time in blocks of 30 minutes. Press [REC I] repeatedly until the desired recording time (30 minutes to 6 hours) appears on the TV screen. One-touch timer recording will start.

• To cancel one-touch timer recording within

the specified time, press [STOP C].

OPEN/CLOSE

DVD

(normal recording)

6:00 5:30

0:30

Press [OK].

4 5

Press [TIMER SET] to set a timer programming.

will appear on the front panel display.

Set the date.

Set starting and ending time.

Select the appropriate external input position

Select a recording media (“DVD” or “VCR”).

Select a recording

mode. (E1/E2) to which your external tuner is connected.

Date

Start

DVD SP

SP 2 : 00

End

- - : - -

Date

Start

- - : - -

DVD SP

SP 2 : 00

End

- - : - -

JAN/02

E1/E2E1REC To Mode

JAN/02

E1/E2E1REC To Mode

12 : 00AM

Date

JAN/02

E1/E2E1REC To Mode

Start

12 : 00AM

DVD SP

End

1 : 00AM

SP 1 : 00

Date

JAN/02

E1/E2E1REC To Mode

Start

12 : 00AM

DVD SP

End

1 : 00AM

SP 1 : 00

Date

JAN/02

12 : 00AM

E1/E2E1REC To Mode

Start

1 : 00AM

DVD SP

SP 1 : 00

End

4 Playback

1:00

Open the disc tray.

OPEN/CLOSE

Insert a disc.

Start playing back.

Stop playing back.

PRECAUTIONS

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Laser Safety

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS

CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM. LOCATION: INSIDE, NEAR THE DECK MECHANISM.

FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this

equipment may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

RADIO-TV INTERFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and receiver.

3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

The caution marking is located on the rear of the cabinet.

RADIATION EXPOSURE.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION:

POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND

A NOTE ABOUT RECYCLING

This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.

Make your contribution to the environment!!!

• Used up batteries do not belong in the dust bin.

• You can dispose of them at a collection point for used up batteries or special waste. Contact your council for details.

For Customer Use: Read carefully the information located at the back of this unit and enter below the Model No. and Serial No. Retain

this information for future reference. Model No. _____________________ Serial No. _____________________

2EN2EN

PRECAUTIONS

Important Safeguards

Introduction

1. Read Instructions - All the safety and operating

instructions should be read before the appliance is operated.

2. Retain Instructions- The safety and operating instructions

should be retained for future reference.

3. Heed Warnings - All warnings on the appliance and in

the operating instructions should be adhered to.

4. Follow Instructions - All operating and use instructions

should be followed.

5. Cleaning - Unplug this product from the wall outlet

before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted

service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5.

6. Attachments - Do not use attachments not

recommended by the product manufacturer as they may cause hazards.

7. Water and Moisture- Do not use this product near water,

for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

8. Accessories - Do not place this product on an unstable

cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the appliance should follow the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

9. Ventilation - Slots and openings in the cabinet are

provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.

10. Power Sources - This product should be operated only

from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

11. Grounding or Polarization - This product is equipped

with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the

outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

12. Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

13. Lightning - For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power-line surges.

14. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

15. Overloading - Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

16. Object and Liquid Entry - Never push objects of any kind into this product through any openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

17. Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

18. Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the

product.

c. If the product has been exposed to rain or water. d. If the product does not operate normally by following

the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.

e. If the product has been dropped or damaged in any way.

f. When the product exhibits a distinct change in

performance this indicates a need for service.

19. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

20. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

21. Heat - This product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

Connections Basic Setup Function Setup VCR Functions

Recording Playback Editing

Others Español

Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling unit can cause serious injury or even death.

3EN 3EN

PRECAUTIONS

Installation Location

For safety and optimum performance of this unit:

• Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV.

• Shield it from direct sunlight and keep it away from devices of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes on the sides of the unit. Avoid locations subject to strong vibration or strong magnetic fields.

Avoid the Hazards of Electrical Shock and Fire

• Do not handle the power cord with wet hands.

• Do not pull on the power cord when disconnecting it from AC outlet. Grasp it by the plug.

• If, by accident, water is spilled on this unit, unplug the power cord immediately and take the unit to our Authorized Service Center for servicing.

Moisture Condensation Warning

Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place or after heating a cold room or under conditions of high humidity. Do not use this unit at least for 2 hours until its inside gets dry.

About Copyright

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

Supplied Accessories

remote control (NB558UD) with batteries (AAAx2)

RCA audio/video cables (WPZ0102TM018/WPZ0102LTE01)

owner's manual (1VMN25333)

quick guide (1VMN25334)

Notice for Progressive Scan Output

Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of picture problems with 525 (480) progressive scan output, it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions regarding your TV set compatibility with this 525p (480p) DVD player, please contact our customer service center.

4EN4EN

Maintenance

PRECAUTIONS

Introduction

Servicing

• Please refer to relevant topics on “TROUBLESHOOTING” on pages 81-84 before returning the product.

• If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug and please call our help line mentioned on the front page to locate an Authorized Service Center.

Cleaning the cabinet

• Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasive.

Cleaning discs

• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion.

• Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analog records.

Cleaning the disc lens

• If this unit still does not perform properly although you refer to the relevant sections and to “TROUBLESHOOTING” in this owner's manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.

Disc handling

• Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.

• Always store the disc in its protective case when it is not used.

Auto head cleaning

• Automatically cleans video heads as you insert or remove a cassette, so you can see a clear picture.

• Playback picture may become blurred or interrupted while the TV program reception is clear. Dirt accumulated on the video heads after a long period of use, or the usage of rental or worn tapes can cause this problem. If a streaky or snowy picture appears during playback, the video heads in your unit may need to be cleaned.

1. Please visit your local Audio/Video store and purchase a good quality VHS video head cleaner.

2. If a video head cleaner does not solve the problem, please consult your dealer or an Authorized Service Center.

Note

• Remember to read the instructions along with the video head cleaner before use.

• Clean video heads only when problems occur.

IR signal check

If the remote control does not work properly, you can test if the remote control sends out the infrared signal with AM radio or a digital camera (including built-in camera of cellular phone). It will help to define the cause of malfunction.

• With an AM radio:

Tune an AM radio to a station with no broadcasting. Press a button on remote control toward the radio. Sound will be fluttering when you press any key and the radio receives the signal. This means the remote control is working.

• With a digital camera (including built-in

camera of cellular phone):

Direct a digital camera to remote control, press and hold a button on remote control. If infrared light appears through digital camera, the remote control is working.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Dolby Digital Recording

“Dolby® Digital Recording enables consumers to record high-quality video with stereo sound on recordable DVD discs. The technology, when utilized instead of PCM recording, also saves recordable disc space, allowing for higher video resolution or extended recording time on each DVD. DVDs created using Dolby Digital Recording will play back on all DVD-video players.” Note: This is true when the players are compatible with actual recordable DVD discs.

HDMI, the HDMI logo and HighDefinition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

Connections Basic Setup Function Setup VCR Functions

Recording Playback Editing

All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes.

with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.

Others Español

5EN 5EN

CONTENTS

Introduction

PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Symbols Used in this Owner's Manual . . . . . . . . . . . . . . .7

FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . 8

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Front Panel Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Connections

CONNECTION TO AN EXTERNAL TUNER. . . . . . . . . . . 13

CONNECTION TO AN EXTERNAL DEVICE . . . . . . . . . . 14

SETTINGS FOR THE VIDEO INPUT. . . . . . . . . . . . . . . . . 15

CONNECTION TO A TV . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

CONNECTION TO A TV WITH AN HDMI™

COMPATIBLE PORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

CONNECTION TO AN AUDIO SYSTEM . . . . . . . . . . . . . 18

Basic Setup

THE DVD / VCR RECORDER SWITCHING . . . . . . . . . . . 19

GUIDE TO ON-SCREEN DISPLAYS AND MENUS . . . . 20

On-Screen Display / Menu . . . . . . . . . . . . . . . . . . . . . . . . . 20

Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

INITIAL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

SETTING THE CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Clock Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Recording

INFORMATION ON DVD RECORDING . . . . . . . . . . . . . 24

BEFORE RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Make Recording Compatible . . . . . . . . . . . . . . . . . . . . . . 25

Setting for Auto Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . 25

BASIC RECORDING &

ONE-TOUCH TIMER RECORDING . . . . . . . . . . . . . . . . . 26

TIMER RECORDING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Hints for Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . 31

SATELLITE LINK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

OVERWRITING UNNECESSARY TITLE . . . . . . . . . . . . . 34

Overwriting from the Beginning of the Title. . . . . . . . 34

Overwriting in the Middle of the Title . . . . . . . . . . . . . . 34

Hints for Overwriting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

EXTERNAL DEVICE RECORDING . . . . . . . . . . . . . . . . . . 36

Recording from an External Device . . . . . . . . . . . . . . . . 36

SETTING A DISC TO PROTECT . . . . . . . . . . . . . . . . . . . . 37

PLAYING THE DISCS IN OTHER DVD PLAYERS . . . . . 38

Finalizing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Auto Finalizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

DUBBING MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Playback

INFORMATION ON PLAYBACK . . . . . . . . . . . . . . . . . . . 42

BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Direct Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Playback from the Title List . . . . . . . . . . . . . . . . . . . . . . . . 44

Playing Back an Audio CD and a CD-RW/-R with MP3

Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Using the Title / Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . 47

Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

SPECIAL PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Resume Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Fast Forward / Fast Reverse Playback . . . . . . . . . . . . . . 48

Skipping TV Commercials During Playback. . . . . . . . . 48

Rapid Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

6EN6EN

Step by Step Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Slow Forward / Slow Reverse Playback. . . . . . . . . . . . . 49

Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Marker Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Title / Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Time Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

REPEAT / RANDOM / PROGRAM PLAYBACK . . . . . . . 53

Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Program Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

SPECIAL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Switching Subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Switching Audio Soundtrack . . . . . . . . . . . . . . . . . . . . . . 55

Switching Virtual Surround System . . . . . . . . . . . . . . . . 56

Switching Camera Angles . . . . . . . . . . . . . . . . . . . . . . . . . 56

Reducing Block Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Editing

INFORMATION ON DISC EDITING. . . . . . . . . . . . . . . . . 57

Guide to a Title List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Editing Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

EDITING DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Deleting Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Putting Names on Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Setting Chapter Marks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Clearing Chapter Marks . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Hiding Chapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Setting Pictures for Thumbnails. . . . . . . . . . . . . . . . . . . . 64

Dividing a Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Putting Name on Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Setting or Releasing Disc Protect . . . . . . . . . . . . . . . . . . 67

Erasing Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Making Edits Compatible . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Function Setup

LIST OF SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

SETUPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Reset All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

VCR Functions

VCR FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

One-touch Timer Recording (OTR) . . . . . . . . . . . . . . . . . 79

Index Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Time Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Other Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Others

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . 83

LANGUAGE CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Español

ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . Back cover

FEATURES

This unit not only plays back DVD, CD and VCR but also offers features for you to record on DVD and edit them after that. The following features are offered with this unit.

Recording

DVD mode VCR mode

This unit is compatible with DVD+RW/DVD-RW, which is rewritable repeatedly and DVD+R/DVD-R, which is available for recording once. Even if you choose DVD-RW/DVD-R, these discs will automatically be recorded in the DVD+VR mode. Also, this unit allows you to record to the cassette tape. You can choose either one for your convenience.

Up to 12 program recording:

You can program the unit to record up to 12 programs within a one-month period. Daily or weekly program recordings are also available.

One-touch timer recording (OTR):

You can easily set a recording time as you prefer. Every time [RECORD I] or [REC I] is pressed during recording, the recording time will be increased by 30 minutes up to 6 hours for DVD, and 8 hours for VCR. The recording automatically stops when the recording time you set is reached or the disc and the cassette tape is full.

Dubbing mode:

You can copy a DVD disc to a cassette tape or copy a cassette tape to a DVD disc. This function will be possible only if the DVD disc or a cassette tape is not copy protected. You cannot record on a tab is removed.

Left channel stereo recording:

This unit can record the sound of the left channel monaural input as left and right channels automatically.

Automatic chapter mark setting:

Chapter marks will be put on recordings as you set before attempting to record.

Automatic title list making:

The unit makes a title list with the index automatically.

cassette tape

when its erase-protection

DVD mode

Playback

Theater surround sound in your home:

When connecting the unit to an amplifier or a decoder which is compatible with Dolby Digital, you can experience the theater surround sound from discs with surround sound system.

Quick search for what you want to watch:

You can easily find the part you want to watch using the search function. Search for a desired point on a disc by title, chapter or time.

Virtual surround system:

You can enjoy stereophonic space through your existing 2 channel stereo system.

Playing back MP3 files:

You can enjoy MP3 files which are recorded on CD-RW/-R.

Quick search for what you want to watch:

You can easily find the part you want to watch using the index search/time search functions. An index mark will be assigned at the beginning of each recording you make. For time search function, you can go to a specific point on a cassette tape by entering the exact amount of time you wish to skip.

DVD mode

VCR mode

Editing

Deleting titles:

You can delete titles which you do not need anymore.

Putting names on titles:

You can put your favorite names on titles.

Setting / clearing chapter marks:

You can set / clear chapter marks on titles.

Hiding chapters:

To keep others from playing back some chapters without permission, you can hide chapters.

Setting pictures for thumbnails:

You can change pictures for thumbnails.

DVD mode

Dividing titles (DVD+RW/DVD-RW only):

You can divide a title into 2 or more.

Putting name on disc:

You can put your favorite disc name.

Compatibility

DVD mode

Available for playing back discs on a regular DVD player:

Recorded discs can be played back on regular DVD players, including computer DVD drives compatible with DVD-video playback. Although DVD+R are playable on other units without finalization in most cases, it is recommended to finalize in order to stabilize the performance. For DVD-RW/ DVD-R, you need to finalize the recorded discs to play back on other DVD players.

Others

Line through output

When an external device, such as cable/satellite box, is connected to E1(Rear) jacks of this unit, the signal from the external device can be output even when the power of the unit is off.

Progressive scan system

Unlike conventional interlace scanning, the progressive scan system provides less flickering and images in higher resolution than that of traditional television signals.

HDMI (High-Definition Multimedia Interface)

You can enjoy clearer audio/video output when connecting this unit to a display device with an HDMI-compatible port.

DVD mode

Symbols Used in this Owner's Manual

To specify for what disc type each function is, we put the following symbols at the beginning of each item to operate. * DVD-RW/-R recorded in VR mode or non compatible

recording format are not playable.

* DVD-RW recorded in the mode other than +VR is not

recordable on this unit unless you erase all contents in the disc (refer to page 68).

* DVD-R recorded in the mode other than +VR is not

recordable on this unit.

Symbol

For Recording, Playing Back, and Editing

For Playback only

If you do not nd any of the symbols listed above under the function heading, the operation is applicable to all media.

Description

Description refers to DVD+RW

Description refers to DVD+R

Description refers to DVD-RW

Description refers to DVD-R

Description refers to VHS tapes Use only cassettes marked VHS ( ).

Description refers to DVD-video

Description refers to audio CD

Description refers to video CD with PBC function

Description refers to video CD without PBC function

Description refers to CD-RW/-R with MP3 les

Introduction

Connections Basic Setup Function Setup VCR Functions

Recording Playback Editing

Others Español

7EN 7EN

Front Panel

FUNCTIONAL OVERVIEW

1 2* 3

(*) The unit can also be turned on by pressing these buttons or insert a cassette tape.

1. Cassette compartment (VCR)

Insert a cassette tape here.

2. OPEN/CLOSE A button (DVD)*

Press to open or close the disc tray.

3. Disc tray (DVD)

Place a disc when it is open.

4. AUDIO input jacks (E2) (DVD/VCR)

Use to connect external device with an RCA audio

cable.

5. VIDEO input jack (E2) (DVD/VCR)

Use to connect external device with an RCA video

cable.

6. S-VIDEO input jack (E2) (DVD/VCR)

Use to connect the S-video output of external device

with an S-video cable.

7. RECORD I button (DVD)

Press once to start recording. Press repeatedly to start the one-touch timer

recording.

8. PLAY B button (DVD)*

Press to start or resume playback.

9. STOP C button (DVD)

Press to stop playback or recording. Press to stop the proceeding timer recording in DVD.

10. DVD indicator

Lights up when the DVD output mode is selected.

11. SOURCE button (DVD/VCR)

Press to select the component you wish to operate.

12. VCR indicator

Lights up when the VCR output mode is selected.

13. D.DUBBING button (DVD/VCR)

Press to start VCR to DVD (DVD to VCR) duplication

which you set in the main menu.

21 13 11 1012 9 8* 72019 18 17 16

15 14

14. TRACKING L / K buttons (VCR)

Press to adjust the tracking during playback or in slow

While playback is in still mode, you can adjust the

15. Display

Refer to “Front Panel Display” on page 12.

16. Infrared sensor window (DVD/VCR)

Receive signals from your remote control so that you

17. RECORD I button (VCR)

Press once to start a recording. Press repeatedly to

18. PLAY B button (VCR)

Press to start playback.

19. STOP C / EJECT A button (VCR) EJECT A button When the unit is in stop mode, press to remove the

STOP C button Press to stop cassette tape playback or recording.

Press to stop the proceeding timer recording in VCR.

20. F.FWD D button (VCR)

Press to rapidly advance the cassette tape, or view the

21. REW E button (VCR)

Press to rewind the cassette tape, or to view the

22. STANDBY-ON

Press to turn on and off the unit.

23. POWER ON indicator (DVD/VCR)

Red LED lights up when power is on.

motion of the cassette tape.

picture blurred vertically.

can control the unit from a distance.

start the one-touch timer recording.

cassette tape from the cassette compartment.

picture rapidly in forward during playback (forward search).

picture rapidly in reverse during playback (rewind search).

y button (DVD/VCR)

6 5 422

8EN8EN

Rear Panel

1 2

FUNCTIONAL OVERVIEW

HDMI OUT

DVD

DIGITAL

AUDIO

AUDIO OUT

COAXIAL

S-VIDEO

OUT

OUT IN

COMPONENT

VIDEO OUT

P /CB

PR /CR

DVD/VCR

S-VIDEO I N --- AUDIO --- OUT

IN --- VIDEO --- OUT

Introduction

Connections Basic Setup Function Setup VCR Functions

RLR

37911 8 6 4510

1. AC Power Cord (DVD/VCR)

Connect to a standard AC outlet to supply power to this

unit.

2. HDMI OUT jack (DVD only)

Use an HDMI cable to connect to a display with an

HDMI compatible port.

3. AUDIO OUT jacks (DVD/VCR)

Use to connect a TV monitor, AV receiver or other

device with an RCA audio cable.

4. VIDEO OUT jack (DVD/VCR)

Use to connect a TV monitor, AV receiver or other

device with an RCA video cable.

5. VIDEO IN jack (E1) (DVD/VCR)

Use to connect external device with an RCA video

cable.

6. AUDIO IN jacks (E1) (DVD/VCR)

Use to connect external device with an RCA audio

cable.

7. S-VIDEO IN jack (E1) (DVD/VCR)

Use to connect the S-video output of external device

with an S-video cable.

8. COMPONENT VIDEO OUT jacks (DVD only)

Use to connect a TV monitor with component video

inputs with a component video cable.

9. S-VIDEO OUT jack (DVD only)

Use to connect the S-video input of a TV monitor, AV

receiver or other device with an S-video cable.

10. AUDIO OUT jacks (DVD only)

Use to connect a TV monitor, AV receiver or other

device with an RCA audio cable.

11. COAXIAL DIGITAL AUDIO OUT jack (DVD only)

Use to connect an AV receiver, Dolby Digital decoder

or other device with a coaxial digital input jack with a digital coaxial cable.

Note

• Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.

Recording Playback Editing

9EN 9EN

Others Español

Remote Control

FUNCTIONAL OVERVIEW

Installing the Batteries in the Remote Control

Install the batteries (AAAx2) matching the polarity indicated inside battery compartment of the remote control.

Open the cover.

Insert batteries.

Make sure to match + and - on the batteries to the marks indicated in the battery compartment.

Close the cover.

Note

Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following:

• Do not mix new and old batteries together.

• Do not use different kinds of batteries together. Although they may look similar, different batteries may have different voltages.

• Make sure that the + and - ends of each battery match the indications in the battery compartment.

• Remove batteries from battery compartment that is not going to be used for a month or more.

• When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area.

• Do not recharge, short-circuit, heat, burn or disassemble batteries.

Using a Remote Control

Keep in mind the following when using the remote control:

• Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit.

• Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the infrared sensor window of the unit.

• Remote control for different devices can interfere with each other. Avoid using remote control for other device located close to the unit.

• Replace the batteries when you notice a fall off in the operating range of the remote control.

• The maximum operable ranges from the unit are as follows.

- Line of sight: approx. 23 feet (7m)

- Either side of the center:

approx. 16 feet (5m) within 30°

- Above: approx. 16 feet (5m) within 15°

- Below: approx. 10 feet (3m) within 30°

16feet (5m)

30˚

11 12

13 15

16 17

5 6

8 9

23feet (7m)

SOURCE DISPLAY OPEN/CLOSE

TIMER SET

ABC DEF.@/:

123

JKL MNOGHI

456

PQRS

TUV WXYZ

SPACETIMER CLEAR

TRACKING

VCRHDMI DVD

REC MODE D.DUBBING

CM SKIP

SEARCH RAPID PLAY

16feet (5m)

30˚

STANDBY-ON

SETUPDISC MENU

21 22

RETURNTITLE

iji

CFgh

+--

25 27

26 28

AUDIOREC

NB558

10 EN10 EN

FUNCTIONAL OVERVIEW

Introduction

1. DISPLAY button (DVD/VCR)

• Press to display the display menu on or off.

2. TIMER SET button (DVD/VCR)

• Press to set the unit in the timer standby mode. In the timer standby mode, press to cancel the mode and to turn the unit on.

3. SOURCE button (DVD/VCR)

• Press to select the appropriate input.

4. Number/Character buttons (DVD/VCR)

• Press to select a title/chapter/track/file on display.

• Press to enter values for the settings in the main menu.

• Press to enter title names.

• Press to start the index/time search in VCR mode.

5. TIMER button (DVD/VCR)

• Press to display the timer programming list.

6. DISC MENU button (DVD)

• Press to display the disc menu.

7. OK button (DVD/VCR)

• Press to confirm or select menu items.

8. TITLE button (DVD)

• Press to display the title list.

9. PREV H button (DVD)

• During playback, press to return to the beginning of the current chapter, track or file.

• When playback is paused, press to play back reverse step by step.

10. REW E button (DVD/VCR)

DVD mode:

• During playback, press to fast reverse.

• When playback is paused, press to play back slow reverse.

VCR mode:

• During playback, press to rewind the cassette tape or to view the picture rapidly in reverse.

11. PAUSE F button (DVD/VCR)

• Press to pause playback or recording.

12. TRACKING

• Press to adjust the tracking during playback or in slow motion of the cassette tape.

• While playback is in still mode, you can adjust the picture blurred vertically.

13. VCR button

• Press to select the VCR output mode.

14. HDMI button (DVD)

• Press to set the HDMI connector’s video signal output mode.

15. REC MODE button (DVD/VCR)

• Press to switch the recording mode.

16. REC I button (DVD/VCR)

• Press once to start a recording.

• Press repeatedly to start the one-touch timer recording.

17. CM SKIP button (DVD)

• During playback, press to skip 30 seconds.

18. SEARCH button (VCR)

• Press to call up the index or time search menu.

19. STANDBY-ON

• Press to turn the unit on and off.

20. OPEN/CLOSE A button (DVD/VCR)

DVD mode:

• Press to open or close the disc tray.

VCR mode:

• Press to remove the cassette tape from the cassette compartment.

/ buttons (VCR)

yy button (DVD/VCR)

21. CLEAR button (DVD/VCR)

DVD mode:

• Press to clear the password once entered or to cancel the programming for CD or to clear the selecting marker number in the edit menu, etc.

VCR mode:

• Press to reset the tape counter.

22. SETUP button (DVD/VCR)

• Press to display the main menu.

• During DVD playback, press and hold for more than 3 seconds to switch the progressive scanning mode to the interlace mode.

23. Cursor K / L / { / B buttons (DVD/VCR)

• Press to select items or settings.

24. RETURN button (DVD/VCR)

Press to return to the previously displayed menu

• screen.

25. PLAY B button (DVD/VCR)

• Press to start or resume playback.

26. NEXT G button (DVD)

• During playback, press to skip to the next chapter, track or file.

• When playback is paused, press to play back forward step by step.

27. FFW D button (DVD/VCR)

DVD mode:

• During playback, press to play back fast forward.

• When playback is paused, press to play back slow forward.

VCR mode:

• During playback, press to rapidly advance the cassette tape or view the picture rapidly in forward.

• When playback is paused, press to view the cassette tape in slow motion.

28. STOP C button (DVD/VCR)

• Press to stop playback or recording.

• Press to exit from the title list.

29. DVD button

• Press to select the DVD output mode.

30. AUDIO button (DVD/VCR)

DVD mode:

• During playback, press to display the audio menu.

VCR mode:

• During playback a HiFi video tape, press to change the audio out setting HiFi and mono.

31. D.DUBBING button (DVD/VCR)

• Press to start VCR to DVD (DVD to VCR) duplication which you set in the main menu.

32. RAPID PLAY button (DVD)

• During playback, press to playback in a slightly faster/slower mode while keeping the sound output.

Note

• If you turn off this unit, [OPEN/CLOSE A] on the remote

control is not available. Be sure to use [OPEN/CLOSE A] or [STOP C / EJECT A] on the unit.

Connections Basic Setup Function Setup VCR Functions

Recording Playback Editing

Others Español

11EN 11EN

Front Panel Display

FUNCTIONAL OVERVIEW

: Appears in the afternoon with

the clock display.

2. Title / track / file and chapter mark

: Appears when indicating a

title / track / file number.

: Appears when indicating a

chapter number.

3. Current status of the unit

: Appears when playback is

paused.

: Appears when playing back a

disc.

: Appears when the timer

programming or OTR has been set and is proceeding.

: Flashes when all timer

recordings have been finished.

BS CS DR CD

: Appears during recording

process.

: Flashes when a recording

pauses.

: Appears when this unit is in

DVD output mode and a disc is in the unit.

: Appears during duplication

process.

: Appears when this unit is in

VCR output mode and a cassette tape is in the unit.

: Appears during duplication

process.

: Appears when this unit is in

VCR

VCR output mode.

: Appears when the timer

recording is proceeding in VCR.

: Appears when VCR is in the

timer recording standby mode.

: Flashes when a program

cannot be performed for some reasons.

VCR

HDDDB

DVD

: Appears when this unit is in

DVD

DVD output mode.

: Appears when the timer

recording is proceeding in DVD.

: Appears when DVD is in the

timer recording standby mode.

: Flashes when a program

cannot be performed for some reasons.

: Appears during VCR to DVD

duplication process.

: Appears during DVD to VCR

duplication process.

4. Displays the following

• Elapsed playback time

• Current title / chapter / track /file number

• Recording time / remaining time

• Clock

• Selected external input position

• Remaining time for one-touch timer recording

• Selected HDMI output mode

Display Message

12 EN12 EN

Appears when the disc tray is opening.

Appears when the disc tray is closing.

Appears when a disc is loaded on the disc tray.

Appears when data is being written on a disc.

Appears when the PBC function is activated. (Video CD playback only. Refer to page 42.)

Appears when HDMI output mode (480p) is selected.

Appears when HDMI output mode (720p) is selected.

Appears when HDMI output mode (1080i) is selected.

Appears when HDMI output mode (1080p) is selected.

CONNECTION TO AN EXTERNAL TUNER

This section describes how to connect this unit to an external tuner such as cable/satellite box.

• When you change the connections, all devices should be turned off.

• Refer to the manual accompanying external devices for more information.

Disconnect the power cords of the devices from the AC outlet.

VHF / UHF

antenna

Cable TV

company

RF coaxial cable

ANT. IN

Make the connection as illustrated below.

rear of your TV

disconnectDisconnect

e.g.)

AUDIO IN

VIDEO IN

rear of your TV

Introduction

Connections

Basic Setup Function Setup VCR Functions

RF coaxial cable

DVD/VCR

S-VIDEO IN --- AUDIO --- OUT

HDMI OUT

IN --- VIDEO --- OUT

RCA audio cable

DVD

DIGITAL

AUDIO

S-VIDEO

AUDIO OUT

OUT

DVD/VCR

COMPONENT

S-VIDEO IN --- AUDIO --- OUT

VIDEO OUT

RLR

/CB

IN --- VI D EO --- OU T

PR /CR

rear of this unit

RCA video cable

S-video cable

RCA video cable

ANT. IN

VIDEO

S-VIDEO

OUT

RCA audio cable

AUDIO OUT

RF coaxial cable

OUT IN

external tuner

Supplied cables used in this connection are as follows:

• RCA audio cable (L/R) x 1

• RCA video cable x 1 Please purchase the rest of the necessary cables at your local store.

Note

• Required cables and connecting methods differ depending on the external tuner. For more information, please contact your external tuner provider.

• Instead of using VIDEO OUT jack of this unit, you can also use S-VIDEO OUT jack, COMPONENT VIDEO OUT jack, or HDMI OUT jack (no AUDIO OUT jack connection required) for connecting to your TV.

With this setup:

• You can record any unscrambled channel by selecting the channel on the external tuner. Be sure that the external tuner is turned on.

• Signal from the external tuner can be output only on CVBS output even when the power of the unit is off.

• You cannot record one channel while watching another channel.

rear of your TV

Plug in the power cords of the devices to the AC outlet.

connect

TV signal

Recording Playback Editing

After making the connection as described above, make

sure to select the appropriate video input type by

following the steps in “SETTINGS FOR THE VIDEO INPUT”

rear of this unit

HDMI OUT

on page 15.

Note to CATV system installer

• This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper grounding - in particular, specifying that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as possible.

Others Español

13EN 13EN

CONNECTION TO AN EXTERNAL DEVICE

Connect the external device properly to either E2 (front) or E1 (rear) input jacks of this unit by using S-video or RCA audio / video cables.

AUDIO OUT

VIDEO

S-VIDEO

OUT

S-VIDEO

external device

OUT

(camcorder, VCR etc.)

VIDEO

OUT

AUDIO OUT

S-video cable

to E2 IN

RCA video cable

RCA audio cable

front of this unit

to E1 IN

S-video

HDMI OUT

cable

S-VIDEO IN --- AUDIO --- OUT

DVD/VCR

LRL

IN --- VIDEO --- OUT

RCA video cable

DIGITAL

AUDIO OUT

COAXIAL

AUDIO

OUT

RCA audio cable

DVD

DVD/VCR

S-VIDEO

S-VIDEO IN --- AUDIO --- OUT

COMPONENT VIDEO OUT

RLR

IN --- VIDEO --- OUT

rear of this unit

After making the connection as described above, make sure to select the appropriate video input type by following the steps in “SETTINGS FOR THE VIDEO INPUT” on page 15.

Supplied cables used in this connection are as follows:

• RCA audio cable (L/R) x 1

• RCA video cable x 1 Please purchase the rest of the necessary cables at your local store.

Note

• When connecting an external device of monaural output to this unit, use AUDIO L jack of E2 (Front).

14 EN14 EN

SETTINGS FOR THE VIDEO INPUT

You must let the unit know which video input jack you are using before making a recording.

Introduction

STANDBY-ON

SOURCE

TIMER SET

DISPLAY OPEN/CLOSE

ABC DEF.@/:

123

JKL MNOGHI

456

PQRS

CM SKIP

TUV WXYZ

SPACETIMER CLEAR

TRACKING

VCRHDMI DVD

REC MODE D.DUBBING

SEARCH RAPID PLAY

NB558

SETUP

SETUPDISC MENU

RETURNTITLE

iji

+--

AUDI OREC

Press [SETUP] and use [K / L] to

select “General Setting”, then press

[OK].

“General Setting” menu will appear.

Use [K / L] to select “Video”, then

press [OK].

Submenu will appear.

Use [K / L] to select “Video Input”,

then press [OK].

Use [K / L] to select desired external

input position, then press [OK].

General Setting

Playback Display Video Recording Clock HDMI Reset All

Video Input

E1 (Rear) E2 (Front)

Progressive Scan TV Aspect Video Input

Use [K / L] to select the input jack

type to connect, then press [OK].

If you want to use VIDEO IN jack, select “Video In”.

If you want to use S-VIDEO IN jack, select “S-Video In”.

General Setting

Playback Display Video Recording Clock HDMI Reset All

E1 (Rear)

Video Input

Video In

E1 (Rear)

S-Video In

E2 (Front)

Progressive Scan TV Aspect Video Input

Connections

Basic Setup Function Setup VCR Functions

Recording Playback Editing

Press [SETUP] to exit.

Others Español

15EN 15EN

CONNECTION TO A TV

Make one of the following connections, depending on the capabilities of your existing device.

VCR and basic DVD connection

Available on DVD only

this unit

DVD

DVD/VCR

DIGITAL

AUDIO

S-VIDEO

COMPONENT

S-VIDEO IN --- AUDIO --- OUT

VIDEO OUT

AUDIO OUT

OUT

COAXIAL

this unit

AUDIO OUT

RCA audio cable

VIDEO

DVD/VCR

LRL

IN --- VID E O --- OU T

AUDIO IN

S-VIDEO IN --- AUDI O --- OU T

HDMI OUT

DVD

DVD/VCR

DIGITAL

AUDIO

S-VIDEO

COMPONENT

S-VIDEO IN --- AUDIO --- OUT

VIDEO OUT

AUDIO OUT

OUT

RLR

OUT IN

/CB

COAXIAL

IN --- VIDEO --- OUT

/CR

RCA video cable

AUDIO OUT (DVD/VCR)

VIDEO OUT

Method 1 Method 2

analog audio good picture better picture

AUDIO

OUT

DVD

COMPONENT

S-VIDEO

OUT

AUDIO IN

RCA audio cable

COAXIAL

AUDIO

DVD

S-VIDEO

OUT

DIGITAL

COMPONENT

VIDEO OUT

P /CB

PR /CR

S-VIDEO IN

and

S-video cable component video cable

DVD

DIGITAL

AUDIO

S-VIDEO

COMPONENT

AUDIO OUT

OUT

COAXIAL

VIDEO OUT

OUT

/CB

PR /CR

DIGITAL

AUDIO OUT

COAXIAL

VIDEO IN

PB/CB

PR/CR

COMPONENT

VIDEO OUT

(Green)

(Blue)

(Red)

(Green)

(Blue)

P /CB

(Red)

PR /CR

AUDIO OUT (DVD)

S-VIDEO OUT COMPONENT

VIDEO OUT

Supplied cables used in this connection are as follows:

• RCA audio cable (L/R) x 1

• RCA video cable x 1 Please purchase the rest of the necessary cables at your local store.

After you have completed the connections

• Switch the input selector on your TV to an appropriate external input channel. Press a button on the TV’s original remote control that selects an external input channel until the DVD recorder’s opening picture appears. Check your TV’s manual for details.

Note

• Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, pictures may be distorted due to the copy protection system.

• You will not be able to hear the sound being output from DVD if you are not connecting DVD AUDIO OUT when you made either S-video or component video out connection.

• When “Progressive Scan” is set to “ON”, no video signal will be output from the VIDEO OUT or S-VIDEO OUT jack.

To set progressive scan mode, refer to page 76

• This unit is compatible with the progressive scan system. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set “Progressive Scan” to “ON”.

16 EN16 EN

CONNECTION TO A TV WITH AN HDMI™ COMPATIBLE PORT

A simple 1-cable connection with a device having an HDMI (high-definition multimedia interface) connector allows digital transfer of both digital video signals and multi-channel audio signals.

Available for DVD only

HDMI IN

HDMI Mode and Actual Output Signals

Press [HDMI] to select the HDMI output mode. The output mode changes as follows every time [HDMI] is pressed.

Front Panel Display Video Output Signal

480 Progressive

Press [HDMI]

Introduction

Connections

720 Progressive

Press [HDMI]

HDMI cable

Press [HDMI]

1080 interlaced

Basic Setup Function Setup VCR Functions

1080 Progressive

this unit

When connecting with an HDMI cable, the audio signal will be output as the digital audio signal simultaneously, so you do not need the analog audio connection described on page 16.

Cables not included.

Please purchase the necessary cables at your local store.

HDMI OUT

Press [HDMI]

• The HDMI mode that is not supported by display device will be skipped.

Recording Playback Editing

Actual Output Modes by Media

Audio recording format of the disc Dolby Digital setting of this unit Actual output

Dolby Digital

DVD-video

LPCM

For audio CD and MP3 files, 2 channel PCM will be output regardless of the “Dolby Digital” setting. If the connected device is not compatible with HDMI BITSTREAM, audio will be output as PCM even if you select

“Stream” in “Dolby Digital” setting (Refer to page 70).

To play back the digital video images of a DVD via an HDMI connection, it is necessary that both the player and the display device (or an AV amplifier) support a copyright protection system called HDCP (high-bandwidth digital content protection system). HDCP is copy protection technology that comprises data encryption and authentication of the connected AV device. This unit supports HDCP. Please read the operating instructions of your display device (or AV amplifier) for more information.

*HDMI: High Definition Multimedia Interface

PCM 2channel PCM

Stream Dolby Digital

PCM

Stream

2channel PCM

Note

• Because HDMI is an evolving technology, it is possible that some devices with an HDMI input may not operate properly with this unit.

• When using an HDCP-incompatible display device, the image will not be viewed properly.

• Among the devices that support HDMI, some devices can control other devices via the HDMI connector; however, this unit cannot be controlled by another device via the HDMI connector.

• The audio signals from the HDMI connector (including the sampling frequency, the number of channels and bit length) maybe limited by the device that is connected.

• Among the monitors that support HDMI, some do not support audio output (for example, projectors). In connections with device such as this unit, audio signals

are not output from the HDMI output connector.

• When this unit’s HDMI connector is connected to a DVI-D compatible monitor (HDCP compatible) with an HDMI-DVI converter cable, the signals are output in digital RGB.

• When the power failure occurs, or when you unplug the unit, some problems in the HDMI setting might occur. Please check and set the HDMI setting again.

• When the unit is connected with an HDMI cable, a revocation list update screen may appear when you try to play back the DVD-video containing a revocation list.

• If the unit is connected to the unauthorized display device with an HDMI cable, the audio/video signal may not be output when playing back a commercial DVD-video.

Others Español

17EN 17EN

CONNECTION TO AN AUDIO SYSTEM

2 Channel Analog Audio Connection

stereo system

AUDI O IN

audio

analog audio

input jacks

RCA audio cable

AUDIO

OUT

DVD

S-VIDEO

COMPONENT

VIDEO OUT

HDMI OUT

DVD

DIGITAL

AUDIO OUT

OUT

/CB

COAXIAL

/CR

DVD/VCR

AUDIO

S-VIDEO

COMPONENT

S-VIDEO IN --- AUDIO --- OUT

VIDEO OUT

OUT

RLR

OUT IN

/CB

IN --- VIDEO --- OUT

/CR

DIGITAL

AUDIO OUT

COAXIAL

AUDIO OUT

Supplied cables used in this connection are as follows:

• RCA audio cable (L/R) x 1 Please purchase the rest of the necessary cables at your local store.

DVD/VCR

S-VI DEO IN --- AU D I O --- OUT

IN --- VI DE O --- OUT

this unit

Digital Audio Connection

Dolby Digital decoder,

MD deck or DAT deck

digital audio

coaxial input

jack

AUDIO

OUT

DVD

S-VIDEO

COMPONENT

VIDEO OUT

HDMI OUT

OUT

/CB

/CR

DIGITAL

AUDIO OUT

COAXIAL

DIGITAL AUDIO OUT

COAXIAL

digital audio coaxial cable

DVD

DIGITAL

AUDIO OUT

COAXIAL

DVD/VCR

AUDIO

S-VIDEO

COMPONENT

S-VIDEO IN --- AUDIO --- OUT

VIDEO OUT

OUT

RLR

OUT IN

/CB

IN --- VIDEO --- OUT

/CR

Setting

Connection

If output is Dolby Digital encoded audio, connect to a Dolby Digital decoder.

Setup >General Setting >Playback >Disc Audio >

Dolby Digital

Stream

Connecting to an MD deck or DAT deck. PCM

If not connected to any external devices. PCM

* To complete these settings, refer to page 74.

Note

• The DVD AUDIO OUT and DIGITAL AUDIO OUT jacks are only useful in DVD mode.

• The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound by an MD or DAT deck.

• By connecting this unit to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi channel surround sound as heard in the movie theaters.

• Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.

18 EN18 EN

THE DVD / VCR RECORDER SWITCHING

Because this product is a combination of a VCR and a DVD recorder, you must select first which component you wish to operate with [SOURCE] on the unit.

Introduction

DVD mode

Press [DVD] on the remote control. (Verify that the DVD indicator is lit.)

VCR mode

Press [VCR] on the remote control. (Verify that the VCR indicator is lit.)

SOURCE D ISPL AY OPEN/CLOSE

TIMER SET

123

456

PQRS

DVD indicator

SOURCE button

VCR indicator

CM SKIP

REC MODE D.DUBBING

SEARCH RAPID PLAY

Note

• You cannot switch to another mode (DVD or VCR) during in the timer-standby mode.

STANDBY-ON

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACETIMER CLEAR

SETUPDISC MENU

RETURNTITLE

iji

CFgh

TRACKING

+--

VCRHDMI DVD

AUDIOREC

NB558

VCR button

DVD button

Connections

Basic Setup

Recording Playback Editing

Function Setup VCR Functions

Others Español

19EN 19EN

GUIDE TO ON-SCREEN DISPLAYS AND MENUS

This unit uses the following on-screen displays and menus to guide you to the easy operations. The on-screen displays give you the information on the loaded disc, the disc/file in playback, or the HDMI status, etc. The menus allow you to change the various kinds of settings for playing back, recording, or editing to suite your preference.

On-Screen Display / Menu

The on-screen display changes in the following order as you press [DISPLAY].

OFF

Disc Information/Menu (only in DVD mode)

Title Name Information

(only when DVD+RW/DVD+R/DVD-RW/DVD-R

(only when a CD with MP3 files is in playback)

(only for the images output through the HDMI output)

is in playback)

File Name Information

DVD

Video

E1 (Rear)

5 15122

VCR mode

12:00AM

0:00:00 HIFISP

4 53

1. Indicates current video status.

2. Indicates the current time.

3. Indicates a recording or playing back mode.

4. Indicates a tape counter.

5. Audio status of the current cassette tape.

Note

• This is an example screen only for explanation. Displayed items are depending on the disc you inserted.

Title/File Name Information

Title Name Information

Title Name

My Title

SP(2Hr) 1:53

* This is an example screen only for explanation.

1. Indicates a disc type and format mode.

2. Indicates the selected external input position.

3. Indicates a recording mode and possible recording

time left.

4. Indicates an operation status.

5. Each icon means:

: Search

: Audio

: Subtitle

: Angle

: Marker

: Noise Reduction

: Zoom

: Surround

: Repeat

6. Indicates the current title number/total number of

titles, the current chapter number/total number of chapters, and time lapse of the current title playback/ total duration of the title.

20 EN20 EN

File Name Information

File Name

My File

1. Displays title/file name.

HDMI Information

Video Info. : 480p / YCbCr Audio Info. : Bitstream

343

*1. Indicates the resolution of the HDMI output image. *2. Indicates the HDMI video format. *3. Indicates the HDMI audio format.

4. Indicates current disc status. * “- - -” will be displayed, when it does not have any

information.

GUIDE TO ON-SCREEN DISPLAYS AND MENUS

Main Menu

Introduction

Press [SETUP] to display the main menu. Then use [K / L] to select a menu and press [OK] to display the

menu. These menus provide entries to all main functions of the unit.

Setup

General Setting

Timer Programming

Title List

Disc Edit

CD Playback Mode

General Setting Menu

General Setting

1 2

Playback Display

Video

Recording Clock

HDMI

Reset All

1. General Setting:

To go to general setting menu.

2. Timer Programming:

To program a timer recording.

3. Title List:

To call up the title list.

4. Disc Edit:

To set up the DVD disc setting.

5. CD Playback Mode:

To set up the CD playback setting.

• “CD Playback Mode” is available only when an audio CD, a video CD, a CD-RW/-R with MP3 files is inserted into the unit.

1. Playback:

To set up the unit to play back discs as you prefer.

2. Display:

To set up the OSD screen as you prefer.

3. Video:

To set up the video setting.

4. Recording:

To set up the unit to record to discs as you prefer.

5. Clock:

To set up the clock of the unit as you need.

6. HDMI:

To set up the HDMI connection setting.

7. Reset All:

To reset the setting to the factory default.

Connections

Basic Setup

Recording Playback Editing

Disc Edit

Edit Disc Name

Erase Disc Make Edits Compatible

Disc Protect OFF ON

Disc Edit

Edit Disc Name

Erase Disc Finalize

Disc Protect OFF ON

Disc Edit

Edit Disc Name

Finalize Disc Protect OFF ON

CD Playback Mode

Random Play

Program Play PBC (Video CD only)

Disc Edit / CD Playback Mode

1. Edit Disc Name:

Allows you to rename the disc.

2. Erase Disc: (DVD+RW/DVD-RW only)

Allows you to erase all contents in the disc and format it.

3. Make Edits Compatible: (DVD+RW only)

Allows you to memorize the editing status on the disc if

you have added or deleted chapters, or made chapters hidden on this unit, and to effect it when playing back on the other unit.

Finalize: (DVD+R/DVD-RW/-R only) Allows you to finalize a disc containing recorded titles.

4. Disc Protect :

Allows you to protect a disc from accidental editing or

recording.

5. Random Play:

Allows you to activate the random playback feature.

6. Program Play: (audio CD/video CD only)

Allows you to activate the program playback feature.

7. PBC (Video CD only):

Allows you to select images or information on the menu

screen by activating PBC (playback control) function.

Function Setup VCR Functions

Others Español

21EN 21EN

INITIAL SETTING

You need to follow these steps when you turn on this unit for the first time.

Press [STANDBY-ON yy].

STANDBY-ON

TIMER SET

SOURCE

123

456

PQRS

DISPLAY OPEN/CLOSE

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACETIMER CLEAR

SETUPDISC MENU

1 2

Turn on the TV. Select the input to which the unit is connected.

Use [K / L] to select your desired

language, then press [OK] to set language.

Initial Setup

OSD Language

English

Français

Español

REC MODE D.DUBBING

CM SKIP

SEARCH RAPID PLAY

TRACKING

VCRHDMI DVD

NB558

RETURNTITLE

iji

+--

AUDI OREC

Press [OK] to activate “Clock Setting”.

Initial Setup

Clock Setting

- - - / - - / - - - - ( - - - )

- - : - - - -

Proceed to step 4 in “Clock Setting”

on page 23.

Input Mode Names for Common TV Brands (Example)

Admiral AUX Panasonic TV/VIDEO Curtis

Mathis GE INPUT, TV/VCR,

Hitachi INPUT, AUX Sanyo VIDEO JVC VIDEO, VIDEO 1,

Kenwood AUX Sony VIDEO1, VIDEO2,

LXI-Series 00 Toshiba TV/GAME Magnavox

LINE1, LINE2, 00, 90, 91, 92, 93

00, 90, 91, 92, 93

VIDEO 2, VIDEO 3

AUX CHANNEL Zenith 00

RCA INPUT, TV/VCR,

00, 90, 91, 92, 93

Samsung TV/VIDEO

Sharp 00

VIDEO3

22 EN22 EN

SETTING THE CLOCK

Set the clock before you try the timer programming.

Clock Setting

Introduction

STANDBY-ON

SOURCE

TIMER SET

DISPLAY OPEN/CLOSE

ABC DEF.@/:

123

JKL MNOGHI

456

PQRS

CM SKIP

TUV WXYZ

7809

SPACE

SPACETIMER CLEAR

TRACKING

VCRHDMI DVD

REC MODE D.DUBBING

SEARCH RAPID PLAY

SETUP

SETUPDISC MENU

RETURNTITLE

iji

+--

AUDI OREC

Press [SETUP] and use [K / L] to

select “General Setting”, then press

[OK].

“General Setting” menu will appear.

Use [K / L] to select “Clock”, then

press [OK].

Use [K / L] to select calendar or time,

then press [OK].

General Setting

Playback Display Video

Clock Setting

Recording

JAN / 01 / 2008 ( TUE )

Clock HDMI Reset All

12 : 00 AM

Use [{ / B] to select an item to set,

and use [K / L] to select the contents to suit your preference, then press [OK].

General Setting

Playback Display Video

Clock Setting

Recording

JAN / 01 / 2008 ( TUE )

Clock HDMI Reset All

12 : 00 AM

Connections

Basic Setup

Recording Playback Editing

Function Setup VCR Functions

NB558

Note

• Your clock setting will be lost if either there is a power failure or this unit has been unplugged for more than 30 seconds.

• For setting the day, year, hour, and minute, [the Number buttons] can also be used.

• You can set the built-in calendar from the year 2007 up to 2056.

Your setting will be activated. The clock start counting when you press [OK].

Press [SETUP] to exit.

Others Español

23EN 23EN

INFORMATION ON DVD RECORDING

Before you make a recording, read the following information.

Recordable Discs

This unit can record to DVD+RW, DVD+R, DVD-RW and DVD-R. DVD+R/DVD-R can only be recorded to once. DVD+RW/ DVD-RW can be recorded to and erased many times.

DVD-RW/-R will be recorded in the DVD+VR mode automatically in this unit.

Logo

Attributes

8cm/12cm, single-sided, single layer disc

DVD+RW DVD+R

Approx. max. recording time (SLP mode): 360 minutes (4.7GB) (for 12cm) 108 minutes (1.4GB) (for 8cm)

DVD-RW

DVD-R

• Following discs are recommended for good recording quality and are proven to be compatible with this unit. However, depending on the media condition the unit may not read the disc properly.

Verbatim DVD+R 8x, DVD+RW 4x, DVD-R 8x, DVD-RW 2x JVC DVD-RW 4x Maxell DVD+R 4x/8x/16x, DVD-R 8x/16x SONY DVD+R 4x/8x/16x, DVD+RW 4x TDK DVD+R 4x/8x/16x

Performance of any other discs are not guaranteed.

• You can play back DVD+RW on most DVD players without finalizing. However, if you have added or deleted chapters, or made chapters hidden, you must perform “Make Edits Compatible” before being able to see those effects on other units. (Refer to page 69 for more details.) To play back discs other than DVD+RW on other DVD players, you will need to finalize.

Unrecordable Discs

• DVD-RW recorded in the mode other than +VR is not recordable on this unit unless you erase all contents in the disc (refer to page 68).

• DVD-R recorded in the mode other than +VR is not recordable on this unit.

Recording Mode

You can select a recording mode among 6 options, and the recording time will depend on the recording mode you select as follows.

Disc size

8cm Disc

12cm Disc

Recording mode

HQ SP (2Hr) SPP LP (3Hr) EP (4Hr) SLP (6Hr) HQ SP (2Hr) SPP LP (3Hr) EP (4Hr) SLP (6Hr)

(1Hr)

(2.5Hr)

(1Hr)

(2.5Hr)

Recording time

18 min

36 min

45 min

54 min

72 min

108 min

60 min

120 min

150 min

180 min

240 min

360 min

Video/sound quality

• The recording time is only an estimate. The actual recording time may differ.

• The audio and video quality gets poorer as the recording time becomes longer.

• Each time [REC MODE] is pressed, recording mode and its allowed recording time will be displayed.

Note

• This unit cannot record to CD-RW or CD-R.

• DVD+RW/+R, DVD-RW/-R and CD-RW/-R recorded on a personal computer or a DVD or CD recorder may not be played back if the disc is damaged or dirty or if there is condensation on the player’s lens.

• If you record a disc using a personal computer, even if it is recorded in a compatible format it may not be played back because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.)

• Since the recording is made by the VBR (variable bit rate) method, depending on the picture you are recording, the actual remaining time for recording may be a little shorter than the remaining time displayed on the TV screen.

• You cannot record copy-protected program using this unit. (Copy-protected signal is included in DVDvideo or some satellite broadcasts.)

• You cannot record “copy-once only” program on DVD.

(good)

(poor)

(good)

(poor)

24 EN24 EN

BEFORE RECORDING

Make Recording Compatible Setting for Auto Chapter

Introduction

Use this feature to make the unfinalized +VR mode discs recorded on other unit recordable on this unit. When you make an additional recording on this unit with “Make Recording Compatible” set to “ON”, the title menu is automatically converted to our style.

1) Press [SETUP] and use [K / L] to select “General Setting”, then press [OK].

“General Setting” menu will appear.

2) Use [K / L] to select “Recording”, then press [OK].

“Recording” menu will appear.

3) Use [K / L] to select “Make Recording Compatible”, then press [OK].

4) Use [K / L] to select “ON” or “OFF”, then press [OK].

General Setting

Playback Display Video Recording Clock HDMI Reset All

ON: Title list will be replaced when you make

additional recordings to the discs recorded by other units.

OFF: Prohibiting additional record to the disc that

has a title list created by other units.

Auto Chapter Auto Finalize

Make Recording Compatible

Dubbing Mode

Make Recording Compatible

OFF

You can set a specified time for chapter marks.

1) Press [SETUP] and use [K / L] to select “General Setting”, then press [OK].

“General Setting” menu will appear.

2) Use [K / L] to select “Recording”, then press [OK].

“Recording” menu will appear.

3) Use [K / L] to select “Auto Chapter”, then press [OK].

4) Use [K / L] to select a desired time option, then press [OK].

General Setting

Playback Display Video Recording Clock HDMI Reset All

Auto Chapter

OFF 5 minutes 10 minutes 15 minutes 30 minutes 60 minutes

Auto Chapter Auto Finalize Dubbing Mode Make Recording Compatible

5) Press [SETUP] to exit.

Note

• The interval for auto chapter marks may slightly differ.

• A blank chapter may be created depending on the remaining time of the disc.

Connections Basic Setup Function Setup VCR Functions

Recording

Playback Editing

5) Press [SETUP] to exit.

Others Español

25EN 25EN

BASIC RECORDING & ONE-TOUCH TIMER RECORDING

Follow the steps to record TV programs from an external tuner. This unit has no tuner system so cannot receive TV broadcasts without external tuner or such devices.

STANDBY-ON

SOURCE

TIMER SET

SOURCE

TIMER SET

DISPLAY OPEN/CLOSE

OPEN/CLOSE

ABC DEF.@/:

123

JKL MNOGHI

456

PQRS

CM SKIP

TUV WXYZ

SPACETIMER CLEAR

TRACKING

VCRHDMI DVD

REC MODE

REC

REC MODE D.DUBBING

SEARCH RAPID PLAY

SETUPDISC MENU

RETURNTITLE

iji

+--

DVD

AUDI OREC

Press [STANDBY-ON yy].

Turn on the TV and be sure to select the input to

which the unit is connected.

Press [DVD].

Press [OPEN/CLOSE A] to open the

disc tray and insert your disc with its

label facing up.

Align the disc to the disc tray guide.

* Make sure the disc is compatible with this unit.

(Refer to page 24 for the list of compatible discs.)

Press [OPEN/CLOSE A] to close the

disc tray.

It may take a while to load

the disc completely.

• When inserting a brand-new DVD+RW/DVD-RW, the unit automatically starts to format.

• If titles have been recorded on the disc, the title list is displayed. Press [STOP C] to exit the title list.

Press [REC MODE] to select a

recording mode.

Refer to “Recording Mode” on page 24 for DVD.

26 EN26 EN

NB558

SP(2Hr) 0:58

Press [SOURCE] to select the

appropriate external input position

(E1/E2) to which your external tuner is connected. Then select the desired channel to record on the external tuner.

BASIC RECORDING & ONE-TOUCH TIMER RECORDING

Introduction

Press [REC I] to start recording.

“I” will be displayed for 5 seconds.

Press [PAUSE F] to pause recording. Press [PAUSE F]] or [REC I] again to restart recording.

To set one-touch timer recording (OTR)...

This is a simple way to set the recording time in blocks of 30 minutes.

Press [REC I] repeatedly until the desired recording time (30 minutes to 6 hours) appears on the TV screen.

One-touch timer recording will start.

0:30

(normal recording)

1:00

Press [STOP C] to stop recording.

The recorded title will appear in the title list.

(Refer to “Guide to a Title List” on page 57.) e.g.) DVD+R

Writing to Disc 90%

1 SP(2Hr)

NOV/21/08 11:00AM NOV/21/08 0:20:44

EMPTY TITLE 1:41:17

• Press [STOP C] to exit the title list.

E1 SP

SP(2Hr)

Connections Basic Setup Function Setup VCR Functions

Recording

Playback Editing

6:00 5:30

• To cancel one-touch timer recording within the

specified time, press [STOP C].

Note

• When you press [REC I], recording starts immediately and continues until the disc is full or you stop recording.

• This unit cannot record images as aspect ratio of 16:9. The 16:9 images will be recorded as 4:3.

• When the unit clock has not been set, the space for a date and time of title names will be blank.

• You cannot change the recording mode during the recording pause mode.

• You can change a channel to be recorded during the recording pause mode.

Note for one-touch timer recording

• Press [DISPLAY] to see the remaining recording time on the TV screen.

• Unlike the timer recording, you can perform the following operations during one-touch timer recording.

- Turning off the power to stop one-touch timer recording.

- Using [REC I] or [STOP C] on the remote control.

• You cannot use the pause function during one-touch timer recording.

• If DVD one-touch timer recording is completed during VCR playback or recording, the DVD will be in stop mode and the VCR keeps the current mode.

• When one-touch timer recording is finished and the power is turned off, the unit will switch to the timer-standby mode automatically if a timer recording has been programmed. Press [TIMER SET] to cancel the timer-standby mode to use the unit continuously.

Others Español

27EN 27EN

+ 65 hidden pages

Magnavox ZV427MG9 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual