Magnavox ZC350MS8 Owner's Manual

Download

Page 1

Owner's Manual

ZC350MS8

IGITAL VIDEO DISC RECORDER

THANK YOU FOR CHOOSING MAGNAVOX.

EED HELP FAST?

READ YOUR QUICK GUIDE AND/OR OWNER'S MANUAL FIRST FOR QUICK TIPS THAT MAKE USING

YOUR MAGNAVOX PRODUCT MORE ENJOYABLE.

IF YOU HAVE READ YOUR INSTRUCTIONS AND STILL NEED ASSISTANCE,

YOU MAY ACCESS OUR ONLINE HELP AT HTTP://WWW.FUNAI-CORP.COM

OR CALL 1-800-605-8610 WHILE WITH YOUR PRODUCT.

Recording Playback EditingIntroduction Connections Basic Setup Function Setup Others

Español

INSTRUCCIONES EN ESPAÑOL INCLUIDAS.

E7H51UD.indd 1E7H51UD.indd 1 2007/02/19 18:23:212007/02/19 18:23:21

Page 2

2EN2EN

PRECAUTIONS

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS

RADIATION EXPOSURE.

CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM. LOCATION: INSIDE, NEAR THE DECK MECHANISM.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

RADIO-TV INTERFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and receiver.

3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this

equipment may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

A NOTE ABOUT RECYCLING

This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.

For Customer Use: Read carefully the information located at the back of this unit and enter below the Model No. and Serial No. Retain

this information for future reference. Model No. _____________________ Serial No. _____________________

Make your contribution to the environment!!!

• Used up batteries do not belong in the dust bin.

• You can dispose of them at a collection point for used up batteries or special waste. Contact your council for details.

The caution marking is located on the rear of the cabinet.

ATTENTION:

POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND

Laser Safety

E7H51UD.indd 2E7H51UD.indd 2 2007/02/19 18:23:212007/02/19 18:23:21

Page 3

3EN 3EN

Recording Playback Editing

Introduction

Connections Basic Setup Function Setup Others

Español

PRECAUTIONS

1. Read Instructions - All the safety and operating instructions

should be read before the appliance is operated.

2. Retain Instructions- The safety and operating instructions

should be retained for future reference.

3. Heed Warnings - All warnings on the appliance and in the

operating instructions should be adhered to.

4. Follow Instructions - All operating and use instructions should

be followed.

5. Cleaning - Unplug this product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted service

and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5.

6. Attachments - Do not use attachments not recommended by

the product manufacturer as they may cause hazards.

7. Water and Moisture- Do not use this product near water, for

example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

8. Accessories - Do not place this product on an unstable cart,

stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the appliance should follow the manufacturer’s instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

9. Ventilation - Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

10. Power Sources - This product should be operated only from the

type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

11. Grounding or Polarization - This product is equipped with a

polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

12. Power Cord Protection - Power supply cords should be routed

so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

13. Outdoor Antenna Grounding - If an outside antenna or cable

system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides

information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A)

14. Lightning - For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

15. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

16. Overloading - Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

17. Object and Liquid Entry - Never push objects of any kind into this product through any openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

18. Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19. Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the

product.

c. If the product has been exposed to rain or water. d. If the product does not operate normally by following the

operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.

e. If the product has been dropped or damaged in any way. f. When the product exhibits a distinct change in performance

this indicates a need for service.

20. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

21. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

22. Heat - This product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

FIGURE A

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL ELECTRICAL CODE

ANTENNA LEAD WIRE

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMP

ELECTRIC SERVICE EQUIPMENT

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)

NEC – NATIONAL ELECTRICAL CODE

S2898A

Important Safeguards

E7H51UD.indd 3E7H51UD.indd 3 2007/02/19 18:23:222007/02/19 18:23:22

Page 4

4EN4EN

PRECAUTIONS

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place or after heating a cold room or under conditions of high humidity. Do not use this unit at least for 2 hours until its inside gets dry.

Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of picture problems with 525 progressive scan output, it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions regarding your TV set compatibility with this 525p DVD player, please contact our customer service center.

For safety and optimum performance of this unit:

• Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV.

• Shield it from direct sunlight and keep it away from devices of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes on the sides of the unit. Avoid locations subject to strong vibration or strong magnetic fields.

• Do not handle the power cord with wet hands.

• Do not pull on the power cord when disconnecting it from AC outlet. Grasp it by the plug.

• If, by accident, water is spilled on this unit, unplug the power cord immediately and take the unit to our Authorized Service Center for servicing.

Installation Location

Avoid the Hazards of Electrical Shock and Fire

Moisture Condensation Warning

About Copyright

Notice for Progressive Scan Output

Supplied Accessories

remote control (NB553UD) with batteries (AAAx2)

RCA audio/video cables (WPZ0102TM018/WPZ0102LTE01)

owner's manual (1VMN23563)

quick guide (1VMN23564)

RF coaxial cable (WPZ0901TM002)

blank media DVD+R (16x) disc (KDDZZZZMB006)

E7H51UD.indd 4E7H51UD.indd 4 2007/02/19 18:23:222007/02/19 18:23:22

Page 5

5EN 5EN

Recording Playback Editing

Introduction

Connections Basic Setup Function Setup Others

Español

PRECAUTIONS

Servicing

• Please refer to relevant topics on “TROUBLESHOOTING” on pages 86-90 before returning the product.

• If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug and please call our help line mentioned on the front page to locate an Authorized Service Center.

Cleaning the cabinet

• Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasive.

Cleaning discs

• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion.

• Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analog records.

Cleaning the disc lens

• If this unit still does not perform properly although you refer to the relevant sections and to “TROUBLESHOOTING” in this owner's manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.

Dolby Digital Recording

“Dolby® Digital Recording enables consumers to record high-quality video with stereo sound on recordable DVD discs. The technology, when utilized instead of PCM recording, also saves recordable disc space, allowing for higher video resolution or extended recording time on each DVD. DVDs created using Dolby Digital Recording will play back on all DVD-video players.”

Note: This is true when the players are compatible with actual recordable DVD discs.

Maintenance

Disc handling

• Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.

• Always store the disc in its protective case when it is not used.

IR signal check

If the remote control does not work properly, you can test if the remote control sends out the infrared signal with AM radio or a digital camera (including built-in camera of cellular phone). It will help to define the cause of malfunction.

• With an AM radio: Tune an AM radio to a station with no broadcasting. Press a button on remote control toward the radio. Sound will be fluttering when you press any key and the radio receives the signal. This means the remote control is working.

• With a digital camera (including built-in

camera of cellular phone):

Direct a digital camera to remote control, press and hold a button on remote control. If infrared light appears through digital camera, the remote control is working.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes.

with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.

E7H51UD.indd 5E7H51UD.indd 5 2007/02/19 18:23:222007/02/19 18:23:22

Page 6

6EN6EN

CONTENTS

Introduction

PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Symbols Used in this Owner's Manual . . . . . . . . . . . . . . .7

FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . 8

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Connections

ANTENNA CABLE CONNECTION . . . . . . . . . . . . . . . . . . 12

RF MODULATOR CONNECTION. . . . . . . . . . . . . . . . . . . 13

CONNECTION TO A CABLE / SATELLITE BOX. . . . . . . 14

CONNECTION TO A TV . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

CONNECTION TO AN AUDIO SYSTEM . . . . . . . . . . . . . 16

Basic Setup

GUIDE TO ON-SCREEN DISPLAYS AND MENUS . . . . 17

On-Screen Display / Menu . . . . . . . . . . . . . . . . . . . . . . . . . 17

Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

INITIAL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

CHANNEL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Auto Channel Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Adding / Deleting Channels . . . . . . . . . . . . . . . . . . . . . . . 21

SETTING THE CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Manual Clock Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Daylight Saving Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

TUNER SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Switching Analog Mode / Digital Mode . . . . . . . . . . . . 25

Channel Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Selecting TV Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

DTV Closed Caption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Closed Caption Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Recording

INFORMATION ON DVD RECORDING . . . . . . . . . . . . . 31

BEFORE RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Make Recording Compatible . . . . . . . . . . . . . . . . . . . . . . 32

Setting for Auto Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . 32

BASIC RECORDING &

ONE-TOUCH TIMER RECORDING . . . . . . . . . . . . . . . . . 33

TIMER RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Hints for Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . 38

OVERWRITING UNNECESSARY TITLE . . . . . . . . . . . . . 39

Overwriting from the Beginning of the Title. . . . . . . . 39

Overwriting in the Middle of the Title . . . . . . . . . . . . . . 39

Hints for Overwriting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

SETTINGS FOR AN EXTERNAL DEVICE . . . . . . . . . . . . 41

Connection to an External Device. . . . . . . . . . . . . . . . . . 41

Recording from an External Device . . . . . . . . . . . . . . . . 42

SETTING A DISC TO PROTECT . . . . . . . . . . . . . . . . . . . . 43

PLAYING THE DISCS IN OTHER DVD PLAYERS . . . . . 44

Finalizing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Auto Finalizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Playback

INFORMATION ON PLAYBACK . . . . . . . . . . . . . . . . . . . 46

BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Direct Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Playback from the Title List . . . . . . . . . . . . . . . . . . . . . . . . 49

Playing Back an Audio CD and a CD-RW/-R

with MP3 Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Using the Title / Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . 52

Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

SPECIAL PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Resume Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Fast Forward / Fast Reverse Playback . . . . . . . . . . . . . . 53

Skipping TV Commercials During Playback. . . . . . . . . 53

Rapid Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Step by Step Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Slow Forward / Slow Reverse Playback. . . . . . . . . . . . . 54

Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Marker Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Title / Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Time Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

REPEAT / RANDOM / PROGRAM PLAYBACK . . . . . . . 58

Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Program Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

SELECTING THE FORMAT OF AUDIO AND VIDEO . . 60

Switching Subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Switching Audio Soundtrack . . . . . . . . . . . . . . . . . . . . . . 60

Switching Virtual Surround System . . . . . . . . . . . . . . . . 61

Switching Camera Angles . . . . . . . . . . . . . . . . . . . . . . . . . 61

Reducing Block Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Editing

INFORMATION ON DISC EDITING. . . . . . . . . . . . . . . . . 62

Guide to a Title List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Editing Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

EDITING DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Deleting Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Putting Names on Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Setting Chapter Marks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Clearing Chapter Marks . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Hiding Chapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Setting Pictures for Thumbnails. . . . . . . . . . . . . . . . . . . . 69

Dividing a Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Putting Name on Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Setting or Releasing Disc Protect . . . . . . . . . . . . . . . . . . 72

Erasing Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Making Edits Compatible . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Function Setup

LIST OF SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

SETUPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Reset All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Others

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . 90

LANGUAGE CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Español

ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . Back cover

E7H51UD.indd 6E7H51UD.indd 6 2007/02/19 18:23:232007/02/19 18:23:23

Page 7

7EN 7EN

Recording Playback Editing

Introduction

Connections Basic Setup Function Setup Others

Español

FEATURES

This unit not only plays back DVD and CD but also offers features for you to record on DVD and edit them after that. The following features are offered with this unit.

This unit is compatible with DVD+RW/DVD-RW, which is rewritable repeatedly and DVD+R/DVD-R, which is available for recording once. You can choose either one for your convenience. Even if you choose DVD-RW/-R, these discs will automatically be recorded in the DVD+VR mode.

Up to 12 program recording:

You can program the unit to record up to 12 programs within a one-month period. Daily or weekly program recordings are also available.

One-touch timer recording (OTR):

You can easily set a recording time as you prefer. Every time [RECORD] or [REC I] is pressed during recording, the recording time will be increased by 30 minutes up to 6 hours. The recording automatically stops when the recording time you set is reached or the disc is full.

Automatic chapter mark setting:

Chapter marks will be put on recordings as you set before attempting to record.

Automatic title list making:

The unit makes a title list with the index automatically.

Left channel stereo recording:

This unit can record the sound of the left channel monaural input as left and right channels automatically (the input from the E2 only).

Recording

Deleting titles:

You can delete titles which you do not need anymore.

Putting names on titles:

You can put your favorite names on titles.

Setting / clearing chapter marks:

You can set / clear chapter marks on titles.

Hiding chapters:

To keep others from playing back some chapters without permission, you can hide chapters.

Setting pictures for thumbnails:

You can change pictures for thumbnails.

Dividing titles:

You can divide a title into 2 or more.

Putting name on disc:

You can put your favorite disc name.

Editing

Theater surround sound in your home:

When connecting the unit to an amplifier or a decoder which is compatible with Dolby Digital, you can experience the theater surround sound from discs with surround sound system.

Quick search for what you want to watch:

You can easily find the part you want to watch using the search function. Search for a desired point on a disc by title, chapter or time.

Virtual surround system:

You can enjoy stereophonic space through your existing 2 channel stereo system.

Playing back MP3 files:

You can enjoy MP3 files which are recorded on CD-RW/-R.

Playback

Available for playing back discs on a regular DVD player:

Recorded discs can be played back on regular DVD players, including computer DVD drives compatible with DVD-video playback. Although DVD+R are playable on other units without finalization in most cases, it is recommended to finalize in order to stabilize the performance. For DVD-RW/-R, you need to finalize the recorded discs to play back on other DVD players.

Compatibility

Progressive scan system

Unlike conventional interlace scanning, the progressive scan system provides less flickering and images in higher resolution than that of traditional television signals.

Others

Symbols Used in this Owner's Manual

To specify for what disc type each function is, we put the following symbols at the beginning of each item to operate. * DVD-RW/-R recorded in VR mode or non compatible

recording format are not playable.

* DVD-RW recorded in the mode other than +VR is not

recordable on this unit unless you erase all contents in the disc (refer to page 73).

* DVD-R recorded in the mode other than +VR is not

recordable on this unit.

Symbol

For Recording, Playing Back, and Editing

For Playback only

Description

Description refers to DVD+RW

Description refers to DVD+R

Description refers to audio CD

Description refers to video CD with PBC function

Description refers to video CD without PBC function

Description refers to CD-RW/-R with MP3 les

Description refers to DVD-video

If you do not nd any of the symbols listed above under the function heading, the operation is applicable to all media.

Description refers to DVD-RW

Description refers to DVD-R

E7H51UD.indd 7E7H51UD.indd 7 2007/02/19 18:23:232007/02/19 18:23:23

Page 8

8EN8EN

FUNCTIONAL OVERVIEW

(*) The unit can also be turned on by pressing these buttons.

1. Disc tray

Place a disc when opening the disc tray.

2. OPEN/CLOSE A button*

Press to open or close the disc tray.

3. CHANNEL

/ buttons

Press to change the channel up and down.

4. STOP C button

Press to stop playback or recording.

5. PLAY B button*

Press to start or resume playback.

6. RECORD I button

Press once to start a recording. Press repeatedly to

start one-touch timer recording.

7. STANDBY-ON

y button

Press to turn the unit on and off. If timer programmings have been set, press to set the

unit in timer-standby mode.

8. AUDIO input jacks (E2)

Use to connect external device with a RCA audio

cable.

9. VIDEO input jack (E2)

Use to connect external device with a RCA video

cable.

10. S-VIDEO input jack (E2)

Use to connect the S-video output of external device

with an S-video cable.

11. Infrared sensor window

Receive signals from your remote control so that you

can control the unit from a distance.

12. TIMER REC indicator Lights up when timer programming is set. Lights up during one-touch timer recording. Flashes when all timer programmings have been

finished, or when a program cannot be performed by some reason.

13. RECORD indicator

Lights up when recording function works.

14. POWER indicator

Lights up when power is on.

Front Panel

14 13 12 11

1 2* 3 4 6 75*

E7H51UD.indd 8E7H51UD.indd 8 2007/02/19 18:23:232007/02/19 18:23:23

Page 9

9EN 9EN

Recording Playback Editing

Introduction

Connections Basic Setup Function Setup Others

Español

Note

• Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.

• This unit does not have the RF modulator.

VIDEO

AUDIO IN

(E1)

S-VIDEO

ANTENNA

AUDIO OUT

COMPONENT

VIDEO OUT

DIGITAL AUDIO OUTPUT

PCM/BITSTREAM

IN OUT

COAXIAL

PB/CB

PR/CR

VIDEO OUT

OUT

3 4

79 5611 10

FUNCTIONAL OVERVIEW

1. ANTENNA IN jack

Use to connect an antenna.

2. VIDEO IN jack (E1)

Use to connect external device with a RCA video cable.

3. VIDEO OUT jack

Use to connect a TV monitor, AV receiver or other

device with a RCA video cable.

4. AC Power Cord

Connect to a standard AC outlet to supply power to

this unit.

5. COAXIAL DIGITAL AUDIO OUTPUT jack

Use to connect an AV receiver, Dolby Digital decoder

or other device with a coaxial digital input jack with a digital coaxial cable.

6. S-VIDEO OUT jack

Use to connect the S-video input of a TV monitor, AV

receiver or other device with an S-video cable.

7. COMPONENT VIDEO OUTPUT jacks

Use to connect a TV monitor with component video

inputs with a component video cable.

8. AUDIO OUT jacks

Use to connect a TV monitor, AV receiver or other

device with a RCA audio cable.

9. S-VIDEO IN jack (E1)

Use to connect the S-video output of external device

with an S-video cable.

10. AUDIO IN jacks (E1)

Use to connect external device with a RCA audio

cable.

11. ANTENNA OUT jack

Use to connect an RF coaxial cable to pass the signal

from the ANTENNA IN to your TV.

Rear Panel

E7H51UD.indd 9E7H51UD.indd 9 2007/02/19 18:23:232007/02/19 18:23:23

Page 10

10 EN10 EN

FUNCTIONAL OVERVIEW

Installing the Batteries in the Remote Control

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

CHANNEL

TIMERREC MODE

AUDIOREC

RAPID PLAYCM SKIP

PQRS

SOURCE

123

456

+--

iji

CFgh

DISPLAY OPEN/CLOSE

16 17*

18 19 20

22* 24

26 27

5 6

8 9

11 12

13 14 15

21 23

Keep in mind the following when using the remote control:

• Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit.

• Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the infrared sensor window of the unit.

• Remote control for different devices can interfere with each other. Avoid using remote control for other device located close to the unit.

• Replace the batteries when you notice a fall off in the operating range of the remote control.

• The maximum operable ranges from the unit are as follows.

- Line of sight: approx. 23 feet (7m)

- Either side of the center:

approx. 16 feet (5m) within 30°

- Above: approx. 16 feet (5m) within 15°

- Below: approx. 10 feet (3m) within 30°

Install the batteries (AAAx2) matching the polarity indicated inside battery compartment of the remote control.

Note

Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following:

• Do not mix new and old batteries together.

• Do not use different kinds of batteries together. Although they may look similar, different batteries may have different voltages.

• Make sure that the + and - ends of each battery match the indications in the battery compartment.

• Remove batteries from battery compartment that is not going to be used for a month or more.

• When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area.

• Do not recharge, short-circuit, heat, burn or disassemble batteries.

Open the cover.

Insert batteries.

Make sure to match + and - on the batteries to the marks indicated in the battery compartment.

Close the cover.

Remote Control

Using a Remote Control

16feet (5m)

30˚

16feet (5m)

30˚

23feet (7m)

E7H51UD.indd 10E7H51UD.indd 10 2007/02/19 18:23:232007/02/19 18:23:23

Page 11

11EN 11EN

Recording Playback Editing

Introduction

Connections Basic Setup Function Setup Others

Español

(*) The unit can also be turned on by pressing these buttons.

1. DISPLAY button

Press to display the display menu on or off.

2. DTV/TV button

Press to switch between digital TV mode (DTV) and

analog TV mode.

3. SOURCE button

Press to select the appropriate input.

4. Number/Character buttons

• Press to select channel numbers.

• Press to select a title/chapter/track/file on display.

• Press to enter values for the settings in the Setup menu.

• Press to enter title names.

5. Confirm ( • ) button

Analog mode:

Press to confirm the channel selection made by [the Number buttons].

Digital mode:

Press to confirm the major / minor channel selection made by [the Number buttons].

6. DISC MENU button

Press to display the disc menu.

7. OK button

Press to confirm or select menu items.

8. TITLE button

Press to display the title list.

9. PREV H button

• During playback, press to return to the beginning of

the current chapter, track or file.

• When playback is paused, press to play back reverse step by step.

10. REW E button

• During playback, press to fast reverse.

• When playback is paused, press to play back slow reverse.

11. PAUSE F button

Press to pause playback or recording.

12. CHANNEL

/ buttons

Press to change the channel up and down.

13. REC MODE button

Press to switch the recording mode.

14. REC I button

• Press once to start a recording.

• Press repeatedly to start the one-touch timer recording.

15. CM SKIP button

During playback, press to skip 30 seconds.

16. STANDBY-ON

y button

Press to turn the unit on and off. If timer program-

mings have been set, press to set the unit in timerstandby mode.

17. OPEN/CLOSE A button*

Press to open or close the disc tray.

18. CLEAR button

Press to clear the password once entered or to can-

cel the programming for CD or to clear the selected marker number, etc.

19. SETUP button

• Press to display the main menu.

• During DVD playback, press and hold for more than 3 seconds to switch the progressive scanning mode to the interlace mode.

20. Cursor K / L / { / B buttons

Press to select items or settings.

21. RETURN

button

Press to return to the previously displayed menu

screen.

22. PLAY B button*

Press to start or resume playback.

23. NEXT G button

• During playback, press to skip to the next chapter, track or file.

• When playback is paused, press to play back forward step by step.

24. FFW D button

• During playback, press to play back fast forward.

• When playback is paused, press to play back slow forward.

25. STOP C button

• Press to stop playback or recording.

• Press to exit from the title list.

26. TIMER button

Press to display the timer programming list.

27. AUDIO button

Analog mode:

Press to display the audio menu during playback.

Digital mode:

• Press to switch the audio language in stop mode.

• Press to display the audio menu during playback.

28. RAPID PLAY button

During playback, press to playback in a slightly fast-

er/slower mode with keeping the audio quality.

FUNCTIONAL OVERVIEW

E7H51UD.indd 11E7H51UD.indd 11 2007/02/19 18:23:252007/02/19 18:23:25

Page 12

12 EN12 EN

ANTENNA CABLE CONNECTION

This section describes how to connect your unit to an antenna, cable box, etc.

* Once connections are completed, turn on the TV and

begin initial setting. Channel scanning is necessary for the unit to memorize all available channels in your area. (Refer to “INITIAL SETTING” on page 19.)

Note

• For your safety and to avoid damage to the device, please unplug the RF coaxial cable from the ANTENNA IN jack before moving the unit.

• If you use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be more effective than set-top versions.

• Antenna out is for tuner pass through only. DVD playback through the RF is not possible.

ANT. IN

VHF / UHF

antenna

RF coaxial cable

cable TV

company

rear of your TV

disconnectdisconnect

1112

HDMI OUT

OUTPUT

REAM

rear of this unit

rear of your TV

connect

Plug in the power cord of this unit and your TV to the AC outlet.

Disconnect the power cord of your TV from the AC outlet.

Disconnect RF coaxial cable from antenna input jack of your TV.

Connect cables to the unit.

Make the basic connection as illustrated below.

Supplied cables used in this connection are as follows:

• RF coaxial cable x 1

• RCA audio cable (L/R) x 1

• RCA video cable x 1 Please purchase the rest of the necessary cables at your local store.

VIDEO

AUDIO IN

(E1)

S-VIDEO

ANTENNA

AUDIO OUT

VIDEO OUT

OUT

AUDIO OUT

VIDEO OUT

ANTENNA

OUT

rear of this unit

VIDE

AUDIO INLRVIDEO IN

ANT. IN

VHF / UHF

antenna

RF coaxial cable

rear of your TV

RCA audio

cable

RCA video cable

cable TV

company

This connection is for TV loop through only

E7H51UD.indd 12E7H51UD.indd 12 2007/02/19 18:23:252007/02/19 18:23:25

Page 13

13EN 13EN

Recording Playback EditingIntroduction

Connections

Basic Setup Function Setup Others

Español

RF MODULATOR CONNECTION

If your TV has antenna in jack only, it is still possible to connect this unit to your TV by using a commercially available stereo audio/video RF modulator. In this case, follow the instructions below.

1) Disconnect the power cords of the devices from the AC outlet.

2) Make the connection as illustrated below.

3) Set your RF modulator’s channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area.

If your RF modulator has a modulator/antenna switch, set it according to the manual supplied with the RF modulator.

4) Plug in the power cords of the devices to the AC outlet.

5) Turn on your TV and choose the same channel as you set the RF modulator’s channel 3/4 switch to.

For more details, follow the manual supplied with the RF modulator.

Note

• RF modulator is not supplied with this unit. You need to purchase it at your local store.

• The quality of picture may become poor if this unit is connected to an RF modulator.

Supplied cables used in this connection are as follows:

• RF coaxial cable x 1

• RCA audio cable (L/R) x 1

• RCA video cable x 1 Please purchase the rest of the necessary cables at your local store.

rear of your TV

rear of your RF modulator

(not supplied)

VIDEO

AUDIO IN

(E1)

S-VIDEO

DIGITAL AUDIO OUTPUT

PCM/BITSTREAM

COAXIAL

VIDEO OUT

OUT

AUDIO IN TO TVANT. INLRCHANNEL

VIDEO IN

ANT. IN

Set channel 3 or 4

rear of this unit

AUDIO OUT

VIDEO OUT

ANTENNA

OUT

RF coaxial cable

VHF / UHF

antenna

RF coaxial cable

cable TV

company

RCA video cable

RCA audio cable

E7H51UD.indd 13E7H51UD.indd 13 2007/02/19 18:23:252007/02/19 18:23:25

Page 14

14 EN14 EN

CONNECTION TO A CABLE / SATELLITE BOX

1) Disconnect the power cords of the devices from the AC outlet.

2) Make the connection as illustrated below.

3) Plug in the power cords of the devices to the AC outlet.

Note

• Required cables and connecting methods differ depending on the cable/satellite box. For more information, please contact your cable/satellite provider.

With this setup:

• You can record any unscrambled channel by selecting the channel on the cable/satellite box. Be sure that the cable/satellite box is turned on.

• You cannot record one channel while watching another channel.

ANT. IN

RF OUTANT. IN

AUDIO IN

VIDEO IN

VIDEO

AUDIO IN

(E1)

S-VIDEO

ANTENNA

DIGITAL AUDIO OUTPUT

PCM/BITSTREAM

IN OUT

COAXIAL

VIDEO OUT

OUT

AUDIO OUT

VIDEO

OUT

S-VIDEO

OUT

ANTENNA

OUT

VIDEO

AUDIO IN

(L1)

S-VIDEO

AUDI O OUT

COMPONENT

VIDEO OUT

IN OUT

PB/CB

PR/CR

VIDEO OUT

VIDEO

AUDIO IN

(E1)

S-VIDEO

AUDI O OUT

VIDEO OUT

This connection is for TV loop through only

cable/satellite box

satellite

dish

e.g.)

cable TV

company

rear of this unit

rear of your TV

RF coaxial cable

RCA audio cable

RCA video cable

RCA audio cable

RCA video cable

S-video cable

Supplied cables used in this connection are as follows:

• RF coaxial cable x 1

• RCA audio cable (L/R) x 1

• RCA video cable x 1 Please purchase the rest of the necessary cables at your local store.

Note to CATV system installer

• This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper grounding - in particular, specifying that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as possible.

E7H51UD.indd 14E7H51UD.indd 14 2007/02/19 18:23:262007/02/19 18:23:26

Page 15

15EN 15EN

Recording Playback EditingIntroduction

Connections

Basic Setup Function Setup Others

Español

Make one of the following connections, depending on the capabilities of your existing device.

Note

• Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, pictures may be distorted due to the copy protection system.

• When “Progressive Scan” is set to “ON”, no video signal will be output from the VIDEO OUT or S-VIDEO OUT jack.

After you have completed the connections

• Switch the input selector on your TV to an appropriate external input channel. Press a button on the TV’s original remote control that selects an external input channel until the DVD recorder’s opening picture appears. Check your TV owner’s manual for details.

To set progressive scan mode, refer to page 84

• This unit is compatible with the progressive scan system. The feature provides you with the higher quality images than the traditional output system does. To utilize this feature, you must set “Progressive Scan” to “ON”.

CONNECTION TO A TV

Supplied cables used in this connection are as follows:

• RCA audio cable (L/R) x 1

• RCA video cable x 1 Please purchase the rest of the necessary cables at your local store.

VIDEO

AUDIO IN

(E1)

S-VIDEO

ANTENNA

AUDIO OUT

LRL

VIDEO OUT

OUT

AUDIO IN

AUDIO OUT

VIDEO OUT

AUDIO OUT

S-VIDEO IN

S-VIDEO

OUT

COMPONENT

VIDEO OUT

PB/CB

PR/CR

COMPONENT

VIDEO IN

PB/CB

PR/CR

(Green)

(Blue)

(Red)

(Green)

(Blue)

(Red)

AUDIO OUT

analog audio

Method 2 Method 3

good picture better picture

S-VIDEO OUT COMPONENT

VIDEO OUTPUT

RCA audio

cable

S-video cable component

video cable

this unit

Method 1

standard picture

VIDEO OUT

AUDIO OUT

VIDEO OUT

VIDEO

RCA video cable

and or or

E7H51UD.indd 15E7H51UD.indd 15 2007/02/19 18:23:272007/02/19 18:23:27

Page 16

16 EN16 EN

CONNECTION TO AN AUDIO SYSTEM

• When you change the connections, all devices should be turned off.

• Refer to the manual accompanying external devices for more information.

2 Channel Analog Audio Connection Digital Audio Connection

Note

• The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound by an MD or DAT deck.

• By connecting this unit to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi channel surround sound as heard in the movie theaters.

• Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.

Supplied cables used in this connection are as follows:

• RCA audio cable (L/R) x 1 Please purchase the rest of the necessary cables at your local store.

Setting

Setup >General Setting >Playback >Disc Audio >

Dolby Digital

Connection

If output is Dolby Digital encoded audio, connect to a Dolby Digital decoder.

Stream

Connecting to an MD deck or DAT deck. PCM

If not connected to any external devices. PCM

* To complete these settings, refer to page 79.

VIDEO

AUDIO IN

(E1)

S-VIDEO

ANTENNA

AUDIO OUT

DIGITAL AUDIO OUTPUT

PCM/BITSTREAM

COAXIAL

LRL

VIDEO OUT

OUT

AUDIO OUT

VIDEO OUT

AUDIO OUT

AUDIO IN

stereo system

audio

analog audio input jacks

RCA audio cable

AUDIO OUT

Dolby Digital decoder,

MD deck or DAT deck

VIDEO

AUDIO IN

(E1)

S-VIDEO

ANTENNA

AUDIO OUT

COMPONENT

VIDEO OUT

DIGITAL AUDIO OUTPUT

PCM/BITSTREAM

IN OUT

COAXIAL

LRL

PB/CB

PR/CR

VIDEO OUT

OUT

DIGITAL AUDIO OUTPUT

PCM/BITSTREAM

COAXIAL

digital audio

coaxial input jack

digital audio coaxial cable

DIGITAL AUDIO OUTPUT

this unit

E7H51UD.indd 16E7H51UD.indd 16 2007/02/19 18:23:272007/02/19 18:23:27

Page 17

17EN 17EN

Connections

Basic Setup

Recording Playback EditingIntroduction Function Setup Others

Español

SP(2Hr) 1:53

5 15122

* This is an example screen only for explanation.

1. Indicates a disc type and format mode.

2. Indicates a channel number or selected external input

position.

3. Indicates a recording mode and possible recording

time left.

4. Indicates an operation status.

5. Each icon means:

: Search

: Audio

: Subtitle

: Angle

: Repeat

: Marker

: Noise Reduction

: Zoom

: Surround

6. Indicates the current title number/total number of

titles, the current chapter number/total number of chapters, and time lapse of the current title playback/ total duration of the title.

Note

• This is an example screen only for explanation. Displayed items are depending on the disc you inserted.

This unit uses the following on-screen displays and menus to guide you to the easy operations. The on-screen displays give you the information on the loaded disc, the disc/file in playback, etc. The menus allow you to change the various kinds of settings for playing back, recording, or editing to suite your preference.

On-Screen Display / Menu

GUIDE TO ON-SCREEN DISPLAYS AND MENUS

DTV Program Guide

English 1/2

A Day of Memories

KABC

A quarter-century ago, which may now qualify as the good old days of newspapering, run-of-paper sales accounted for 80 percent of the industry's advertising revenues.

DTV 6.1

1 5

52 53

1. Broadcast station

2. Program title (max. 2 lines displayed)

3. Audio language (“Other” is displayed when the

audio language cannot be acquired, or the acquired languages are other than English, Spanish or French.)

4. Program guide (max. 6 lines displayed)

5. Channel number

Note

• When the program guide is displayed in more than 7

lines, use [K / L] to scroll.

• “No description provided” is displayed when the program guide is not provided.

Disc Information / Menu

The on-screen display changes in the following order as you press [DISPLAY].

OFF

DTV Program Guide (only in DTV mode)

Disc Information/Menu

Title Name Information

(only when DVD+RW/DVD+R/DVD-RW/DVD-R

is in playback)

File Name Information

(only when a CD with MP3 files is in playback)

Title Name Information

Title Name

My Title

File Name Information

File Name

My File

1. Displays title/file name.

Title/File Name Information

E7H51UD.indd 17E7H51UD.indd 17 2007/02/19 18:23:282007/02/19 18:23:28

Page 18

18 EN18 EN

1. Edit Disc Name:

Allows you to rename the disc.

2. Erase Disc: (DVD+RW/DVD-RW only) Allows you to erase all contents in the disc and format it.

3. Make Edits Compatible: (DVD+RW only) Allows you to memorize the editing status on the disc if

you have added or deleted chapters, or made chapters hidden on this unit, and to effect it when playing back on the other unit.

Finalize: (DVD+R/DVD-RW/-R only) Allows you to finalize a disc containing recorded titles.

4. Disc Protect :

Allows you to protect a disc from accidental editing or

recording.

5. Random Play:

Allows you to activate the random playback feature.

6. Program Play: (audio CD/video CD only) Allows you to activate the program playback feature.

7. PBC (Video CD only):

Allows you to select images or information on the menu

screen by activating PBC (playback control) function.

Disc Edit

Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON

1 2 3 4

CD Playback Mode

Random Play Program Play PBC (Video CD only)

1 2 3

5 6 7

Disc Edit

Edit Disc Name Finalize Disc Protect OFF ON

1 2 3

1 3 4

GUIDE TO ON-SCREEN DISPLAYS AND MENUS

Main Menu

Press [SETUP] to display the main menu. Then use [K / L] to select a menu and press [OK] to display the

menu. These menus provide entries to all main functions of the unit.

Disc Edit / CD Playback Mode

Disc Edit

Edit Disc Name Erase Disc Finalize Disc Protect OFF ON

1 2 3 4

1. General Setting:

To go to general setting menu.

2. Timer Programming:

To program a timer recording.

3. Title List:

To call up the title list.

4. Disc Edit:

To set up the DVD disc setting.

5. CD Playback Mode:

To set up the CD playback setting.

• “CD Playback Mode” is available only when an audio CD, a video CD, a CD-RW/-R with MP3 files is inserted into the unit.

Setup

Timer Programming

Title List

Disc Edit

CD Playback Mode

General Setting

1 2 3 4 5

General Setting Menu

1. Playback:

To set up the unit to play back discs as you prefer.

2. Display:

To set up the OSD screen as you prefer.

3. Video:

To set up the video setting.

4. Recording:

To set up the unit to record to discs as you prefer.

5. Clock:

To set up the clock of the unit as you need.

6. Channel:

To adjust the channel setting of the unit as you prefer.

7. Reset All:

To reset the setting to the factory default.

General Setting

Playback Display Video Recording Clock Channel Reset All

1 2 3 4 5 2 3

1 2 3 4 5 6 7

E7H51UD.indd 18E7H51UD.indd 18 2007/02/19 18:23:282007/02/19 18:23:28

Page 19

19EN 19EN

Connections

Basic Setup

Recording Playback EditingIntroduction Function Setup Others

Español

INITIAL SETTING

You need to follow these steps when you turn on this unit for the first time.

Press [STANDBY-ON yy].

Turn the TV on. Select the input to which the unit is connected.

Use [K / L] to select your desired

language, then press [OK] to set language.

Initial Setup

OSD Language

English Français Español

Use [K / L] to select the type of

broadcasting signal, then press [OK].

Initial Setup

Channel Preset

Make sure the antenna is

connected to “ANTENNA IN” jack.

Antenna

Cable (Analog)

Cable (Analog / Digital)

The unit will start getting channels available in your area.

Antenna:

(When using antenna) The channels broadcasted in analog TV and

digital TV are automatically scanned and memorized. Only the receivable channels in the area will be memorized.

Cable (Analog):

(When using basic cable) The channels broadcasted in analog CATV are

automatically scanned and memorized.

Cable (Analog / Digital):

(When using basic cable) The channels broadcasted in analog CATV and

digital CATV are automatically scanned and memorized.

Auto Presetting Now

CH 1

To cancel the auto channel preset during scanning:

Press [RETURN] or [SETUP] to cancel.

Press [OK] to activate “Clock Setting”.

Initial Setup

Clock Setting

- - - / - - / - - - - ( - - - )

- - : - - - -

Proceed to step 5 in “Manual Clock

Setting” on page 24.

• If a PBS (public broadcasting station) is

available in your area, press [RETURN] or [SETUP] to exit, then follow “Auto Clock Setting” on page 23.

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

CHANNEL

TIMERREC MODE

AUDIOREC

RAPID PLAYCM SKIP

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

STANDBY-ON

SETUP

RETURN

E7H51UD.indd 19E7H51UD.indd 19 2007/02/19 18:23:292007/02/19 18:23:29

Page 20

20 EN20 EN

CHANNEL SETTING

If you have changed antenna connection, we recommend that you program available channels in your area with the following procedures.

Press [SETUP] and use [K / L] to

select “General Setting”, then press [OK].

“General Setting” menu will appear.

Use [K / L] to select “Channel”, then

press [OK].

“Channel” menu will appear.

Use [K / L] to select “Auto Channel

Preset”, then press [OK].

Use [K / L] to select the type of

broadcasting signal, then press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

Auto Channel Preset Manual Channel Preset TV Audio Select

Auto Channel Preset

Antenna Cable (Analog) Cable (Analog / Digital)

The unit will start getting channels available in your area.

• When aerial antenna is connected, select “Antenna”.

• When connected to CATV, select “Cable (Analog)” or “Cable (Analog/Digital)”.

To cancel the auto channel preset during scanning:

Press [RETURN] or [SETUP] to cancel.

When scanning is over, press [SETUP]

to exit.

To cycle through only the memorized channels, use

[CHANNEL

/ ].

To select a channel directly (including the ones not memorized), use [the Number buttons].

Auto Channel Scan

Note

• If the auto channel preset is canceled during presetting, some channels not yet preset may not be received.

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

CHANNEL

TIMERREC MODE

AUDIOREC

RAPID PLAYCM SKIP

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE

PQRS

123

456

7809

SETUP

RETURN

CHANNEL

+--

E7H51UD.indd 20E7H51UD.indd 20 2007/02/19 18:23:292007/02/19 18:23:29

Page 21

21EN 21EN

Connections

Basic Setup

Recording Playback EditingIntroduction Function Setup Others

Español

Press [DTV/TV] to select the mode

(DTV or TV) to/from which you want to add/delete channels.

Press [SETUP] and use [K / L] to

select “General Setting”, then press [OK].

“General Setting” menu will appear.

Use [K / L] to select “Channel”, then

press [OK].

“Channel” menu will appear.

Use [K / L] to select “Manual Channel

Preset”, then press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

Auto Channel Preset Manual Channel Preset TV Audio Select

• If you are adding or deleting analog TV/CATV channels, go to

ANALOG

to continue.

• If you are deleting digital TV/CATV channels, go to

DIGITAL

to continue.

Adding / Deleting Channels

CHANNEL SETTING

You may want to add or delete TV channels if your channel lineup changes or if you no longer watch some channels.

Adding channel is only available for the analog TV channels.

Make sure

• You perform “Auto Channel Scan” before adding or deleting the channels.

Instructions continue on the next page.

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

CHANNEL

TIMERREC MODE

AUDIOREC

RAPID PLAYCM SKIP

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE

PQRS

123

456

7809

SETUP

RETURN

CHANNEL

+--

E7H51UD.indd 21E7H51UD.indd 21 2007/02/19 18:23:292007/02/19 18:23:29

Page 22

22 EN22 EN

ANALOG

Select the channel number to add or

delete.

• Use [CHANNEL / ] to cycle through only

the memorized channels.

• Use [{ / B] to cycle through all the channels

including the ones not memorized.

• Use [the Number buttons] to select a channel

directly.

• When a memorized channel is selected, “Add” is checked and highlighted as a default.

• When an unmemorized channel is selected “Delete” is checked and highlighted as a default.

Use [K / L] to select “Add” or

“Delete”, then press [OK].

Manual Channel Preset

CH 2

Add Delete

Your setting will be activated and it will automatically switch to the next channel so that you can continue adding or deleting channels.

Press [SETUP] to exit.

DIGITAL

Select the channel number to delete.

• Only the major channel is displayed in “Manual Channel Preset” menu. (The channel number displayed in the parenthesis is a virtual channel number)

• Use [CHANNEL

/ ] to cycle through only

the memorized channels.

• You cannot use [{ / B] for the digital TV channel selection.

• Use [the Number buttons] to select a channel directly.

• When a memorized channel is selected, “Add” is checked and highlighted as a default.

• When an unmemorized channel is selected “Delete” is checked and highlighted as a default.

Use [K / L] to select “Delete”, then

press [OK]. Then select the next channel to delete.

• If the setting is complete, press [RETURN] to activate “Manual Channel Preset”.

Manual Channel Preset

Add Delete

DTV 2 (CH - - - )

Your setting will be activated.

WARNING:

• For the digital TV channels, you cannot recover the deleted channels once they are deleted unless you perform the auto channel preset again.

Press [SETUP] to exit.

CHANNEL SETTING

E7H51UD.indd 22E7H51UD.indd 22 2007/02/19 18:23:302007/02/19 18:23:30

Page 23

23EN 23EN

Connections

Basic Setup

Recording Playback EditingIntroduction Function Setup Others

Español

SETTING THE CLOCK

Set the clock before you try the timer programming. If a PBS (public broadcasting station) is available in your area, follow “Auto Clock Setting” below. If not, follow “Manual Clock Setting” on page 24.

Note

• The clock may set itself automatically after you connect the antenna/cable signal and plug in the power cord.

• Only the analog PBS channel signal is effective for auto clock setting.

• The unit receives the clock data at 12:00 a.m. / p.m. from the PBS channel when the power is off.

Press [SETUP] and use [K / L] to

select “General Setting”, then press [OK].

“General Setting” menu will appear.

Use [K / L] to select “Clock”, then

press [OK].

“Clock” menu will appear.

Use [K / L] to select “Auto Clock

Setting”, then press [OK].

Use [K / L] to select “Auto”, then

press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

Clock Setting Auto Clock Setting Daylight Saving Time

Auto Clock Setting

OFF Auto Manual

Press [SETUP] to exit.

Press [STANDBY-ON yy] to turn off

the unit.

This unit will search for the time only when the power is off. Leave it off for several minutes to give this unit time to set the clock.

Auto Clock Setting

This unit can set the time and date automatically by referring to a PBS station.

Make sure

• The antenna/cable TV connections are correct.

• Channels are set. (Refer to page 23.)

• If this unit is connected to a cable/satellite box, select the local PBS station on them to set the clock automatically.

Select “Manual” at step 4, then press

[OK].

Use [the Number buttons] or [K / L]

to enter your PBS channel number, then press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

Clock Setting Auto Clock Setting Daylight Saving Time

Auto Clock Setting

OFF Auto Manual

Set Channel No.

CH 1

Press [SETUP] and turn off the unit.

If the unit chooses an incorrect PBS channel, set the PBS channel manually by following the steps below.

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

CHANNEL

TIMERREC MODE

AUDIOREC

RAPID PLAYCM SKIP

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

STANDBY-ON

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE

PQRS

123

456

7809

SETUP

E7H51UD.indd 23E7H51UD.indd 23 2007/02/19 18:23:302007/02/19 18:23:30

Page 24

24 EN24 EN

SETTING THE CLOCK

Press [SETUP] and use [K / L] to

select “General Setting”, then press [OK].

“General Setting” menu will appear.

Use [K / L] to select “Clock”, then

press [OK].

“Clock” menu will appear.

Use [K / L] to select “Daylight Saving

Time”, then press [OK].

Use [K / L] to select “ON (MAR -

NOV)”, “ON (APR - OCT)” or “OFF”, then press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

Clock Setting Auto Clock Setting Daylight Saving Time

Daylight Saving Time

ON (MAR - NOV) ON (APR - OCT) OFF

ON (MAR - NOV): Move forward one hour on the second Sunday in March and move back one hour on the first Sunday in November.

ON (APR - OCT): Move forward one hour on the first Sunday in April and move back one hour on the last Sunday in October.

Press [SETUP] to exit.

Daylight Saving Time

When “Daylight Saving Time” is “ON”, the unit clock will automatically adjust the time in order to fit the daylight saving time. “ON (MAR - NOV)” has been selected as the default.

Press [SETUP] and use [K / L] to

select “General Setting”, then press [OK].

“General Setting” menu will appear.

Use [K / L] to select “Clock”, then

press [OK].

“Clock” menu will appear.

Use [K / L] to select “Clock Setting”,

then press [OK].

Use [K / L] to select calendar or time,

then press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

Clock Setting Auto Clock Setting Daylight Saving Time

Clock Setting

JAN / 01 / 2007 ( MON )

12 : 00 AM

Use [{ / B] to select an item to set,

and use [K / L] to select the contents to suit your preference, then press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

Clock Setting Auto Clock Setting Daylight Saving Time

Clock Setting

JAN / 01 / 2007 ( MON )

12 : 00 AM

Your setting will be activated. The clock start counting when you press [OK].

Press [SETUP] to exit.

Note

• Your clock setting will be lost if either there is a power failure or this unit has been unplugged for more than 30 seconds when you set the clock manually.

• For setting the day, year, hour, and minute, [the Number buttons] can also be used.

• You can set the built-in calendar from the year 2007 up to 2056.

Manual Clock Setting

E7H51UD.indd 24E7H51UD.indd 24 2007/02/19 18:23:302007/02/19 18:23:30

Page 25

25EN 25EN

Connections

Basic Setup

Recording Playback EditingIntroduction Function Setup Others

Español

TUNER SETTINGS

Switching Analog Mode / Digital Mode

You can easily switch the analog TV (NTSC) and digital TV (ATSC) with the remote control and enjoy viewing the HDTV (high definition TV) programs as well as the SDTV (standard definition TV) programs.

Press [DTV/TV] on the remote control.

• The analog mode and digital mode switch alternately.

Note

• When you switch the analog mode to the digital mode, it may take about 10 seconds until the digital channel selection is completed. The following screen is displayed while switching the mode.

Now Scanning

DTV 125. 1

Channel Selection

<Digital TV Channels> Enter the major and minor channel number with [the

Number buttons] to select a channel you want to watch. For 1-digit number

e.g.) 2-2 ch: major channel [0] + [2] or [2] + [•] minor channel [0] + [2], [2] + [•] or

[2] + leave it for 2 seconds.

For 2-digit number

e.g.) 35-16ch: major channel [3] + [5] minor channel [1] + [6]

• If you enter 1 digit for major channel and leave it for 2 seconds, the number will be taken as the major channel and lowest minor channel of the major channel will be displayed.

• If there is no minor channel input, lowest minor channel of the major channel will be displayed.

Note

• It may take up to 5 to 7 seconds to switch the digital TV channels.

• In digital TV broadcasting, 2 or more channels, called minor channels, are simultaneously broadcast on one main channel, called major channel.

About digital TV broadcasting:

With its high definition broadcast, digital broadcasting far surpasses analog broadcasting in both its picture and sound quality.

What is the minor channel?

By using high compression technology, digital broadcasting offers a service that enables multiple signals to send simultaneously.

Therefore, you can select more than one program per major channel since digital broadcasting technology distinguishes between multiple channels broadcast by a signal network.

: change automatically

CH4-1

18:00

18:30

19:00

19:30

20:00

CH4-2

CH4-1

CH4-3

smallestCHsmallest

CH4-3

CH4

CH4-2CH4-1

smallest

: change manually by using [CHANNEL / ]

ATSC (digital mode)NTSC (analog mode)

[Air Time]

major channel

minor channel

Select channels by using [CHANNEL / ] or [the

Number buttons] found on remote control.

[CHANNEL

/ ]

Use [CHANNEL

/ ] to change the channel.

[the Number buttons]

Press the channel number with [the Number buttons] to select a channel you want to watch.

Enter the channel number with [the Number buttons] to select a channel you want to watch.

For 1-digit number e.g.) 2 ch: [0] + [2], [2] + [•] or

[2] + leave it for 2 seconds. For 2-digit number e.g.) 12ch: [1] + [2]

E7H51UD.indd 25E7H51UD.indd 25 2007/02/19 18:23:312007/02/19 18:23:31

Page 26

26 EN26 EN

Press [AUDIO] to cycle through

available audio languages.

English 1/2

• When you press [AUDIO], selected language

will be displayed on the TV screen.

• Every time you press [AUDIO], the language

will be switched. e.g.) English 1/3 ➔ Spanish 2/3 ➔ Other 3/3

• Available languages differ depending on the broadcast.

• The language information display will automatically disappear.

• When you record digital TV broadcasting, the audio language you have selected will be recorded.

Note

• The timer recording for digital TV cannot record any audio language other than English.

• Pressing [AUDIO] does not control external device audio.

• When there is only one audio channel on the broadcast, pressing [AUDIO] does not display anything.

TUNER SETTINGS

This section describes how to switch the TV audio. When you record a TV program, only the audio selected here will be recorded.

Selecting TV Audio

Digital TV

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

CHANNEL

TIMERREC MODE

AUDIOREC

RAPID PLAYCM SKIP

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

AUDI O

E7H51UD.indd 26E7H51UD.indd 26 2007/02/19 18:23:312007/02/19 18:23:31

Page 27

27EN 27EN

Connections

Basic Setup

Recording Playback EditingIntroduction Function Setup Others

Español

Press [SETUP] and use [K / L] to

select “General Setting”, then press [OK].

“General Setting” menu will appear.

Use [K / L] to select “Channel”, then

press [OK].

“Channel” menu will appear.

Use [K / L] to select “TV Audio

Select”, then press [OK].

Use [K / L] to select “Stereo” or

“SAP”, then press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

Auto Channel Preset Manual Channel Preset TV Audio Select

TV Audio Select

Stereo SAP

Stereo:

Outputs main-audio.

SAP (secondary audio program):

Outputs sub-audio.

Press [SETUP] to exit.

Note on recording analog TV audio

• When you record an analog TV program available in second audio or stereo, you have to select either “Stereo” or “SAP” in “General Setting” menu beforehand. Refer to the following table to check an appropriate setting.

Selected

audio

Broadcast

audio

Disc

recording

Audio

output

Stereo STEREO+SAP STEREO STEREO

STEREO STEREO STEREO

MONO+SAP MONO MONO

MONO MONO MONO

SAP STEREO+SAP SAP SAP

STEREO STEREO STEREO

MONO+SAP SAP SAP

MONO MONO MONO

TUNER SETTINGS

Selecting TV Audio (cont’d)

Analog TV

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

CHANNEL

TIMERREC MODE

AUDIOREC

RAPID PLAYCM SKIP

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

SETUP

E7H51UD.indd 27E7H51UD.indd 27 2007/02/19 18:23:312007/02/19 18:23:31

Page 28

28 EN28 EN

Press [SETUP] and use [K / L] to

select “General Setting”, then press [OK].

“General Setting” menu will appear.

Use [K / L] to select “Display”, then

press [OK].

Use [K / L] to select “CC Style”, then

press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

OSD Language Screen Saver CC Style V-Chip

Use [K / L] to select “DTV CC”, then

press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

OSD Language Screen Saver CC Style V-Chip

CC Style

DTV CC User Setting Font Size

Font Style Edge Type Font Opacity Font Color Back Opacity Back Color

Use [K / L] to the desired DTV closed

caption, then press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

OSD Language Screen Saver CC Style V-Chip

CC Style

DTV CC User Setting Font Size Font Style Edge Type Font Opacity Font Color Back Opacity Back Color

DTV CC

OFF Service1 Service2 Service3 Service4 Service5 Service6

OFF:

Select if you do not want DTV CC. This is the default.

Service 1 to Service 6:

Select one of these before changing any other item in the closed caption menu. Choose “Service 1” under normal circumstances.

Press [SETUP] to exit.

TUNER SETTINGS

DTV Closed Caption

Digital TV

Digital TV has its own closed captions called DTV CC. Use this menu to change the settings for DTV CC.

Note

• Even if you set “DTV CC” to anything other than “OFF”, its effect will temporarily be canceled while recording.

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

CHANNEL

TIMERREC MODE

AUDIOREC

RAPID PLAYCM SKIP

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

SETUP

E7H51UD.indd 28E7H51UD.indd 28 2007/02/19 18:23:312007/02/19 18:23:31

Page 29

29EN 29EN

Connections

Basic Setup

Recording Playback EditingIntroduction Function Setup Others

Español

Press [SETUP] and use [K / L] to

select “General Setting”, then press [OK].

“General Setting” menu will appear.

Use [K / L] to select “Display”, then

press [OK].

Use [K / L] to select “CC Style”, then

press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

OSD Language Screen Saver CC Style V-Chip

Use [K / L] to select “User Setting”,

then press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

OSD Language Screen Saver CC Style V-Chip

CC Style

DTV CC User Setting Font Size

Font Style Edge Type Font Opacity Font Color Back Opacity Back Color

Use [K / L] to select “ON”, then press

[OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

OSD Language Screen Saver CC Style V-Chip

CC Style

DTV CC User Setting Font Size Font Style Edge Type Font Opacity Font Color Back Opacity Back Color

User Setting

ON OFF

TUNER SETTINGS

Closed Caption Style

Digital TV

Digital TV can also change the style of its closed caption such as font, color or size, etc.

Instructions continue on the next page.

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

CHANNEL

TIMERREC MODE

AUDIOREC

RAPID PLAYCM SKIP

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

SETUP

E7H51UD.indd 29E7H51UD.indd 29 2007/02/19 18:23:312007/02/19 18:23:31

Page 30

30 EN30 EN

Use [K / L] to select the item and

switch the setting for each item you want to set, then press [OK].

• When “User Setting” is set to “ON”, you can set the following items. CC style set by “User Setting” will be displayed.

• The setting description for each item is shown below.

Font size of the displayed caption can be switched as below.

General Setting

Playback Display Video Recording Clock Channel Reset All

OSD Language Screen Saver CC Style V-Chip

CC Style

DTV CC User Setting Font Size Font Style Edge Type Font Opacity Font Color Back Opacity Back Color

Font Size

Middle Large Small

Font style of the displayed caption can be switched as below.

General Setting

Playback Display Video Recording Clock Channel Reset All

OSD Language Screen Saver CC Style V-Chip

CC Style

DTV CC User Setting Font Size Font Style Edge Type Font Opacity Font Color Back Opacity Back Color

Font Style

Style1 Style2 Style3 Style4 Style5 Style6 Style7 Style8

Edge type of the displayed caption can be switched as below.

General Setting

Playback Display Video Recording Clock Channel Reset All

OSD Language Screen Saver CC Style V-Chip

CC Style

DTV CC User Setting Font Size Font Style Edge Type Font Opacity Font Color Back Opacity Back Color

Edge Type

None Raised Depressed Uniform L.Shadow R.Shadow

Font opacity of the displayed caption can be switched as below.

General Setting

Playback Display Video Recording Clock Channel Reset All

OSD Language Screen Saver CC Style V-Chip

CC Style

DTV CC User Setting Font Size Font Style Edge Type Font Opacity Font Color Back Opacity Back Color

Font Opacity

Solid Translucent Flash

Font color of the displayed caption can be switched as below.

General Setting

Playback Display Video Recording Clock Channel Reset All

OSD Language Screen Saver CC Style V-Chip

CC Style

DTV CC User Setting Font Size Font Style Edge Type Font Opacity Font Color Back Opacity Back Color

Font Color

Transparent White Black Red Green Blue Yellow Magenta Cyan

Background opacity of the displayed caption can be switched as below.

General Setting

Playback Display Video Recording Clock Channel Reset All

OSD Language Screen Saver CC Style V-Chip

CC Style

DTV CC User Setting Font Size Font Style Edge Type Font Opacity Font Color Back Opacity Back Color

Back Opacity

Solid Translucent Flash

Background color of the displayed caption can be switched as below.

General Setting

Playback Display Video Recording Clock Channel Reset All

OSD Language Screen Saver CC Style V-Chip

CC Style

DTV CC User Setting Font Size Font Style Edge Type Font Opacity Font Color Back Opacity Back Color

Back Color

Transparent White Black Red Green Blue Yellow Magenta Cyan

Press [SETUP] to exit.

TUNER SETTINGS

E7H51UD.indd 30E7H51UD.indd 30 2007/02/19 18:23:322007/02/19 18:23:32

Page 31

31EN 31EN

Recording

Basic SetupConnections Playback EditingIntroduction Function Setup Others

Español

INFORMATION ON DVD RECORDING

This unit can record to DVD+RW, DVD+R, DVD-RW and DVD-R. DVD+R/DVD-R can only be recorded to once. DVD+RW/ DVD-RW can be recorded to and erased many times.

DVD-RW/-R will be recorded in the DVD+VR mode automatically in this unit.

You can select a recording mode among 6 options, and the recording time will depend on the recording mode you select as follows.

Recording mode

Recording time

Video/sound quality

Disc size

8cm Disc

60 min

120 min

150 min

180 min

240 min

360 min

12cm Disc

(poor)

(good)

(1Hr)

SP (2Hr) SPP

(2.5Hr)

LP (3Hr) EP (4Hr) SLP (6Hr)

18 min

36 min

45 min

54 min

72 min

108 min

(1Hr)

SP (2Hr) SPP

(2.5Hr)

LP (3Hr) EP (4Hr) SLP (6Hr)

• The recording time is only an estimate. The actual recording time may differ.

• The audio and video quality gets poorer as the recording time becomes longer.

• Each time [REC MODE] is pressed, recording mode and its allowed recording time will be displayed.

• Following discs are recommended for good recording quality and are proven to be compatible with this unit. However, depending on the media condition the unit may not read the disc properly.

Verbatim DVD+R 8x/16x, DVD+RW 4x, DVD-R 8x, DVD-RW 2x JVC DVD-RW 4x Maxell DVD+R 4x/8x/16x, DVD-R 8x/16x SONY DVD+R 4x/8x/16x, DVD+RW 4x TDK DVD+R 4x/8x/16x

Performance of any other discs are not guaranteed.

• You can play back DVD+RW on most DVD players

without finalizing. However, if you have added or deleted chapters, or made chapters hidden, you must perform “Make Edits Compatible” before being able to see those effects on other units. (Refer to page 74 for more details.) To play back discs other than DVD+RW on other DVD players, you will need to finalize.

Note

• This unit cannot record to CD-RW or CD-R.

• All high definition pictures will be down converted to the standard definition pictures when they are recorded on this unit.

• DVD+RW/+R, DVD-RW/-R and CD-RW/-R recorded on a personal computer or a DVD or CD recorder may not be played back if the disc is damaged or dirty or if there is condensation on the player’s lens.

• If you record a disc using a personal computer, even if it is recorded in a compatible format it may not be played back because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.)

• Since the recording is made by the VBR (variable bit rate) method, depending on the picture you are recording, the actual remaining time for recording may be a little shorter than the remaining time displayed on the TV screen.

• You cannot record copy-protected program using this unit. (Copy-protected signal is included in DVDvideo or some satellite broadcasts.)

• You cannot record “copy-once only” program on DVD.

Recordable Discs

Before you make a recording, read the following information.

Recording Mode

• DVD-RW recorded in the mode other than +VR is not recordable on this unit unless you erase all contents in the disc (refer to page 73).

• DVD-R recorded in the mode other than +VR is not recordable on this unit.

Unrecordable Discs

Logo

Attributes

8cm/12cm, single-sided, single layer disc Approx. max. recording time (SLP mode): 360 minutes (4.7GB) (for 12cm) 108 minutes (1.4GB) (for 8cm)

DVD+RW DVD+R

DVD-RW

DVD-R

E7H51UD.indd 31E7H51UD.indd 31 2007/02/19 18:23:322007/02/19 18:23:32

Page 32

32 EN32 EN

BEFORE RECORDING

Use this feature to make the unfinalized +VR mode discs recorded on other unit recordable on this unit. When you make an additional recording on this unit with “Make Recording Compatible” set to “ON”, the title menu is automatically converted to our style.

1) Press [SETUP] and use [K / L] to select “General

Setting”, then press [OK].

“General Setting” menu will appear.

2) Use [K / L] to select “Recording”, then press [OK].

“Recording” menu will appear.

3) Use [K / L] to select “Make Recording Compatible”,

then press [OK].

4) Use [K / L] to select “ON” or “OFF”, then press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

Auto Chapter Auto Finalize Make Recording Compatible

Make Recording Compatible

ON OFF

ON: Title list will be replaced when you make

additional recordings to the discs recorded by other units.

OFF: Prohibiting additional record to the disc that

has a title list created by other units.

5) Press [SETUP] to exit.

Make Recording Compatible Setting for Auto Chapter

You can set a specified time for chapter marks.

1) Press [SETUP] and use [K / L] to select “General Setting”, then press [OK].

“General Setting” menu will appear.

2) Use [K / L] to select “Recording”, then press [OK].

“Recording” menu will appear.

3) Use [K / L] to select “Auto Chapter”, then press [OK].

4) Use [K / L] to select a desired time option, then press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

Auto Chapter Auto Finalize Make Recording Compatible

Auto Chapter

OFF 5 minutes 10 minutes 15 minutes 30 minutes 60 minutes

5) Press [SETUP] to exit.

Note

• The interval for auto chapter marks may slightly differ.

• A blank chapter may be created depending on the remaining time of the disc.

E7H51UD.indd 32E7H51UD.indd 32 2007/02/19 18:23:322007/02/19 18:23:32

Page 33

33EN 33EN

Recording

Basic SetupConnections Playback EditingIntroduction Function Setup Others

Español

BASIC RECORDING & ONE-TOUCH TIMER RECORDING

Press [STANDBY-ON yy].

Turn on the TV and be sure to select the input to which the unit is connected.

Press [OPEN/CLOSE A] to open the

disc tray and insert your disc with its label facing up.

Align the disc to the disc tray guide.

* Make sure the disc is compatible with this unit.

(Refer to page 31 for the list of compatible discs.)

Press [OPEN/CLOSE A] to close the

disc tray.

It may take a while to load

the disc completely.

• When inserting a brand-new DVD+RW/DVDRW, the unit automatically starts to format.

• If titles have been recorded on the disc, the title list is displayed. Press [STOP C] to exit the title list.

Press [REC MODE] to select a

recording mode.

Refer to “Recording Mode” on page 31.

SP(2Hr) 0:58

Press [DTV/TV] to select analog TV or

digital TV, then use [CHANNEL

/ ]

or [the Number buttons] to select a desired channel to record.

Refer to “Switching Analog Mode/Digital Mode” and “Channel Selection“ on page 25.

CH 12

Follow the steps to record TV programs.

Instructions continue on the next page.

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

CHANNEL

TIMERREC MODE

AUDIOREC

RAPID PLAYCM SKIP

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

STANDBY-ON

DTV/TV DISPLAY OPEN/CLOSE

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE

PQRS

123

456

7809

CHANNEL

+--

REC MODE

REC

E7H51UD.indd 33E7H51UD.indd 33 2007/02/19 18:23:332007/02/19 18:23:33

Page 34

34 EN34 EN

BASIC RECORDING & ONE-TOUCH TIMER RECORDING

Press [STOP C] to stop recording.

The recorded title will appear in the title list. (Refer to “Guide to a Title List” on page 62.)

e.g.) DVD+R

Writing to Disc 90%

1 SP(2Hr)

EMPTY TITLE 1:41:17

SP(2Hr)

NOV/21/07 11:00AM

CH12 SP

NOV/21/07 0:20:44

• Press [STOP C] to exit the title list.

Press [REC I] to start recording.

“I” will be displayed for 5 seconds.

Press [PAUSE F] to pause recording. Press [PAUSE F]] or [REC I] again to restart recording.

To set one-touch timer recording (OTR)...

This is a simple way to set the recording time in blocks of 30 minutes.

Press [REC I] repeatedly until the desired recording time (30 minutes to 6 hours) appears on the TV screen.

One-touch timer recording will start.

0:30

(normal recording)

6:00 5:30

1:00

• To cancel one-touch timer recording within the

specified time, press [STOP C].

Note

• When you press [REC I], recording starts immediately and continues until the disc is full or you stop recording.

• This unit cannot record images as aspect ratio of 16:9. The 16:9 images will be recorded as 4:3.

• When the unit clock has not been set, the space for a date and time of title names will be blank.

• When you record a TV program, you have to select the TV channel audio beforehand. Only the selected channel audio will be recorded. Refer to “Selecting TV Audio” on pages 26-27 for more details.

• This unit cannot record in both stereo and SAP (secondary audio program) at the same time.

• You cannot change the recording mode during the recording pause mode.

• You can change a channel to be recorded during the recording pause mode.

Note for one-touch timer recording

• Press [DISPLAY] to see the remaining recording time on the TV screen.

• Unlike the timer recording, you can perform the following operations during one-touch timer recording.

- Turning off the power to stop one-touch timer recording.

- Using [REC I] or [STOP C] on the remote control.

• You cannot use the pause function during one-touch timer recording.

• When one-touch timer recording is finished and the power is turned off, the unit will switch to the timer-standby mode automatically if a timer recording has been programmed. Press [STANDBY-ON

y] to cancel the timer-

standby mode to use the unit continuously.

E7H51UD.indd 34E7H51UD.indd 34 2007/02/19 18:23:332007/02/19 18:23:33

Page 35

35EN 35EN

Recording

Basic SetupConnections Playback EditingIntroduction Function Setup Others

Español

TIMER RECORDING

Press [TIMER].

Use [K / L] to select “New Program”,

then press [OK].

Timer Programming

1/1

MON JAN/01 11:00AM

Date Start End CH New Program

Use [K / L] to enter the date, then

press [B].

Timer Programming

1/1

MON JAN/01 11:00AM

Date Start End CH New Program

Date

JAN/02

DTV125. 1

Mode

SP 2 : 00

Start

- - : - -

End

- - : - -

Daily

MON-SAT

JAN/01

JAN/31

MON-FRI

SAT

FRI

SUN

You can program the unit to record up to 12 programs within a month in advance. Daily or weekly program recordings are also available.

Before recording, make sure

• Set the clock before setting a timer programming.

• Insert a recordable disc with enough recordable space.

Note

• If you have not set the clock yet:

“Clock Setting” menu will appear instead of the timer

programming list at step 1. Continue with the step 4 in “Manual Clock Setting” on page 24 before setting a timer programming.

• Use [s / B] to move the cursor to the left and the right in “Timer Programming” menu.

Instructions continue on the next page.

Guide to Timer Programming Display

Timer Programming

1/1

MON JAN/01 11:00AMSP (1:00)

JAN/ 2/07 12:00 AM 125.1 SP

Date Start End CH JAN/02 12:00AM 1:00AM DTV125. 1 New Program

1 Title of a timer program (Contains date, time, channel,

recording mode of the program) 2 Current date and time 3 Recording mode, and length of the recording 4 Timer program list 5 Total number of pages and current page (2 pages

maximum)

When pressing [L] at the current date, the date will change as follows.

e.g.) January 1st

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

CHANNEL

TIMERREC MODE

AUDIOREC

RAPID PLAYCM SKIP

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

STANDBY-ON

OPEN/CLOSE

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE

PQRS

123

456

7809

SETUP

TIMER

E7H51UD.indd 35E7H51UD.indd 35 2007/02/19 18:23:332007/02/19 18:23:33

Page 36

36 EN36 EN

Use [K / L / s / B] or [the Number

buttons] to enter the start and end time, then press [B].

1/1

New Program

Date

JAN/02

DTV125. 1

Mode

SP 2 : 00

Start

12 : 00AM

End

- - : - -

Use [K / L / s / B] to select analog

(“- - -”) / digital (“DTV”) mode or external input (E1 / E2), then press [B].

e.g.) external input mode

1/1

New Program

Date

JAN/02

Mode

SP 1 : 00

Start

12 : 00AM

End

1 : 00AM

To record from external input (e.g., cable/ satellite box), select E1 or E2.

Use [K / L] to select the channel number to record.

For digital mode, select both major and minor channels. Refer to “How to select a channel number for the timer recording” on page 37 for more details.

e.g.) analog mode

1/1

New Program

Date

JAN/02

Mode

SP 1 : 00

Start

12 : 00AM

End

1 : 00AM

e.g.) digital mode

1/1

New Program

Date

JAN/02

DTV125. 1

Mode

SP 1 : 00

Start

12 : 00AM

End

1 : 00AM

Use [K / L] to select a recording

mode.

1/1

New Program

Date

JAN/02

DTV125. 1

Mode

SP 1 : 00

Start

12 : 00AM

End

1 : 00AM

Refer to “Recording Mode” on page 31.

• You can check the remaining recordable space of the disc when you select the recording mode.

Date

JAN/02

DTV125. 1

Mode

SP 1 : 00

Start

12 : 00AM

End

1 : 00AM

Auto recording mode select...

When “Auto” is selected as a recording mode, the unit calculates how much time is available on the disc and determines the appropriate recording mode to complete recording the program.

1/1

New Program

Date

JAN/02

DTV125. 1

Mode

Auto

Auto 0 : 00

Start

12 : 00AM

End

1 : 00AM

• “Auto” is only available for one program in the timer program list.

• The recording may be cut short when the available recording space of the disc is too limited.

Press [OK] when all items are

entered.

Your program setting will be stored.

• To set another program, repeat steps 2 to 7.

• To exit, press [TIMER] or [SETUP].

• When 2 or more programs are overlapped, “Timer program overlapped” appears, and the overlapped program will be displayed in blue.

• To correct the timer program refer to “Checking, canceling, or correcting the timer programming information” on page 37.

Press [STANDBY-ON yy] to set a timer

programming.

TIMER REC indicator will light up on the front panel.

TIMER RECORDING

E7H51UD.indd 36E7H51UD.indd 36 2007/02/19 18:23:342007/02/19 18:23:34

Page 37

37EN 37EN

Recording

Basic SetupConnections Playback EditingIntroduction Function Setup Others

Español

How to select a channel number for the timer recording

Analog TV

For channel number 2-6 press, press [B] or [ • ] to decide the channels. For other channels (7-69), the channel will be decided as soon as you enter the channel number.

Analog CATV

For channel number 1-12 press, press [B] or [ • ] to decide the channels. For other channels (13-

125), the channel will be decided as soon as you enter the channel number.

Digital TV

For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99), the channel will be decided as soon as you enter the channel number.

Digital CATV

For channel number 1-13 press, press [B] or [ • ] to decide the channels. For other channels (14-

135), the channel will be decided as soon as you enter the channel number.

minor channels

For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99), the channel will be decided as soon as you enter the channel number.

<Hint>

• You can decide the 1-digit channel number by pressing 0 first , then enter desired 1-digit channel number.

e.g.) “5”: [0]+[5]

• For selecting the channels with [K / L] you need to press [B] or [ • ] to decide the channel number.

• For selecting the minor channels with [K / L], please make sure the minor channel your are selecting is existed.

[K / L] does not skip the non-existed minor channels.

TIMER RECORDING

Checking, canceling, or correcting the timer programming information

If the timer program did not complete correctly, the error number appears in the timer programming list.

1) Press [STANDBY-ON

y].

TIMER REC indicator will light off on the front panel.

2) Press [TIMER].

3) Check the information on the list you will need.

Timer Programming

MON JAN/01 11:00AMSP (1:00)

JAN/ 2/07 12:00 AM 125.1 SP

Date Start End CH JAN/02 12:00AM 1:00AM DTV125. 1 New Program

4-A) To delete the timer program:

1 Use [K / L] to select the program you want to

delete, then press [OK]. 2 Use [K / L] to select “Delete”, then press [OK]. Confirmation window will appear. 3 Use [K / L] to select “Yes”, then press [OK].

4-B) To correct the timer program:

1 Use [K / L] to select the program you want to

correct, then press [OK]. 2 Use [K / L] to select “Program Change”, then

press [OK]. 3 Correct the timer program by using

[K / L / { / B], then press [OK].

5) Press [TIMER] to exit.

6) Press [STANDBY-ON

y] to return to the timer

standby mode.

Note

• Press [TIMER] to check the timer recording in progress. When the timer recording is proceeding, that

program will be highlighted with red. In this case, you cannot select any other program.

Timer Programming

1/1

TUE JAN/02 11:00AM

Date Start End CH

E41 JAN/02 12:00AM 1:00AM DTV125. 1

New Program

Each error number means:

E1-22 E37-39

Recording error other than below

E41 Power failed

E24 Unrecordable disc E42 No disc when

recording

E25-26 Copy prohibited

program

E43 Already 49 titles

recorded

E29 Disc protected E44 Already 254 chapters

recorded

E30 Disc full E45 Copy prohibited

program

E35 PCA full *1 E46 It is impossible to

record additionally on a disc recorded by other units when setting “ Make Recording Compatible” to “OFF”.

E36 Already finalized

video format disc

E40 Some portion has

not been recorded because of program overlapping. Recording did not start at the start time.

• E23, E27, E28, E31, E32, E33 and E34 are not displayed.

• A program with the error number is grayed in the timer programming list.

• Once the timer programming list with error line(s) is displayed, or after canceling and setting again the timer standby mode, the program line(s) with error will be cleared.

*1 PCA is a disc's space reserved for recording test.

Press [STOP C] on the front panel of the unit. [STOP C] on the remote control is not effective.

To stop the timer recording in process

E7H51UD.indd 37E7H51UD.indd 37 2007/02/19 18:23:342007/02/19 18:23:34

Page 38

38 EN38 EN

TIMER RECORDING

Hints for Timer Recording

When the starting time is the same:

A program set previously (PROG. A) has priority.

PROG. A

PROG. B

actual recording

PROG. A

PROG. B

The rst 2 minutes (at the longest) will be cut o.

PROG. A

• If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer programming will be lost.

• If a disc is not inserted, TIMER REC indicator flashes and timer recording cannot be performed. In some cases, TIMER REC indicator will light up momentarily around the start point as the unit attempts to record. Please insert a recordable disc.

• When all the timer recording is completed, TIMER REC indicator flashes. To play back or eject the recorded disc, press

[STANDBY-ON

y] first, then select the recorded title and press [PLAY B], or [OPEN/CLOSE A] to remove the disc.

• During timer recording or timer standby mode (TIMER REC indicator will light up), any operations on the unit will not be

available. To make these operations available, press [STOP C] on the front panel to cancel the timer recording or

[STANDBY-ON

y] to release timer standby mode (TIMER REC indicator will light off).

• To cancel the timer standby mode, press [STANDBY-ON

y].

• When the starting and the ending time are the same, the length of the recording will be set for 24 hours. When the disc becomes full during the recording, the unit turns itself off.

• When the programmed starting and ending time are earlier than the current time, the setting will not be accepted and be cleared for redoing.

• If the starting time is earlier and the ending time is later than the current time, the recording will start right after you turn the power off.

• The timer recording for digital TV cannot record any audio language other than English.

The Priority of Overlapped Settings

Note for DVD recording

• When the recording time of 2 programs are overlapped, or the end time of a program and the start time of another program is the same, the first 2 minutes (at the longest) of the subsequent program will be cut off.

• If the cut-off portion comes up to 3 minute or more, this program will be displayed with error number E40 in the timer programming list.

PROG. A

PROG. B

actual recording

The rst 2 minutes (at the longest) will be cut o.

PROG. BPROG. A

When the end time of the programming currently being recorded and the start time of the subsequent program are same:

The beginning of the PROG. B may be cut o.

• Timer program which has the earlier start time will be placed first in the timer program list, and be given priority over the programs with the later start time when timer programs overlap.

• When timer programs overlap, the first 2 minutes (at the longest) of the later recording will be cut off.

• When two or more timer programs have the same start time, the program set first will be given priority.

• A timer recording of lower priority will be canceled or start from the middle.

• Check the overlapped timer programmings and change the priority if necessary.

E7H51UD.indd 38E7H51UD.indd 38 2007/02/19 18:23:352007/02/19 18:23:35

Page 39

39EN 39EN

Recording

Basic SetupConnections Playback EditingIntroduction Function Setup Others

Español

OVERWRITING UNNECESSARY TITLE

You can overwrite the existing title from the beginning.

1) Press [STANDBY-ON

y].

Make sure that the TV input is set on the unit.

2) Load the disc that includes a title to be overwritten.

It takes a while to display

the title list.

Title list will appear. If the title list does not appear, press [TITLE].

3) Press [REC MODE] to select a recording mode.

Refer to “Recording Mode” on page 31.

4) Use [K / L] to select a title to be overwritten, then

press [OK].

1 SP (2Hr)

NOV/21/07 11:00AM

CH12 SP

NOV/21/07 0:20:44

NOV/22/07 11:35

AM CH13 EP

NOV/22/07 0:10:33

EMPTY TITLE 1:37:52 SP(2Hr)

5) Use [K / L] to select “Overwrite”, then press [OK].

1 SP (2Hr)

NOV/21/07 11:00AM

CH12 SP

NOV/21/07 0:20:44

Edit

Overwrite

Play

6) Select the channel you want to record.

(Refer to page 25 on how to select a channel.)

e.g.) DVD+RW

CH 12

+RW

0:01:00

SP(2Hr) 2:00

F I

selected title number to be overwritten

7) Press [REC I].

Overwriting recording starts. The elapsed-time counter starts running.

8) Press [STOP C] to stop recording.

Title name is also overwritten.

This operation may take a

while to be completed.

You can overwrite the existing title from the selected position.

1) Follow the steps 1, 2 and 4 on the left.

2) Use [K / L] to select “Play”, then press [OK].

Playback will start.

3) Press [PAUSE F] at the point from which you want to start overwriting.

4) Press [REC I]. “F I”, display menu, channel, and the time lapse will

be displayed as illustrated on the left.

5) Select the channel you want to record.

(Refer to page 25 on how to select a channel.)

6) Press [REC I] again.

Overwriting recording starts.

7) Press [STOP C] to stop recording.

This operation may take a

while to be completed.

Overwriting from the Beginning of the Title

Note

• The remaining recording time is displayed on the bottom right corner of the TV screen during overwriting.

Note

• Recording mode of the overwriting title is the same as that of the original (overwritten) title when overwriting in the middle of the title.

• Title name will not be overwritten.

Overwriting in the Middle of the Title

E7H51UD.indd 39E7H51UD.indd 39 2007/02/19 18:23:352007/02/19 18:23:35

Page 40

40 EN40 EN

OVERWRITING UNNECESSARY TITLE

When you overwrite on the unnecessary title, there were various circumstances such as follows. Please note that following cases only describe the overwriting without any recording mode discrepancy. To avoid accidental deletion please check if there is no important title after the overwriting point.

When overwriting title is shorter than the existing title:

(overwriting from the beginning of the title)

overwrite recording : A

existing title : B

after overwriting

30 - 180 seconds will be cut o.

When overwriting title is longer than the existing title:

(overwriting from the beginning of the title)

overwrite recording : A

existing title : B

after overwriting

When overwriting in the middle of the title:

30 - 180 seconds will be cut o.

overwrite recording : A

existing title : B

after overwriting

overwrite recording : A

existing title : B

existing title : C

after overwriting

title name : A

title name : B

title name : A

title name : C

title name : B*

title name : B

Overwritten section and the rest of the sections will

have the same title name as the original existing title (B).

Hints for Overwriting

Note

• When a title name is overwritten, its thumbnail is also overwritten.

• “Auto Chapter” interval time is reset at the overwriting start point.

• A chapter mark is put the beginning of the overwrite title when overwriting in the middle of the title.

E7H51UD.indd 40E7H51UD.indd 40 2007/02/19 18:23:352007/02/19 18:23:35

Page 41

41EN 41EN

Recording

Basic SetupConnections Playback EditingIntroduction Function Setup Others

Español

SETTINGS FOR AN EXTERNAL DEVICE

Use [K / L] to select “Video Input”,

then press [OK].

Use [K / L] to select desired external

input position, then press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

Progressive Scan TV Aspect Video Input

Video Input

E1 (Rear) E2 (Front)

Use [K / L] to select the input jack

type to connect, then press [OK].

If you want to use VIDEO IN jack, select “Video In”.

If you want to use S-VIDEO IN jack, select “S-Video In”.

General Setting

Playback Display Video Recording Clock Channel Reset All

Progressive Scan TV Aspect Video Input

Video Input

E1 (Rear) E2 (Front)

E1 (Rear)

Video In S-Video In

Press [SETUP] to exit.

Connect the external device properly to the unit by using input jacks either E2 (Front) or E1 (Rear). When connecting an external device of monaural output to this unit, use AUDIO L jack of E2 (Front). Use S-video or the RCA audio/video cables for this connection.

Connection to an External Device

Press [SETUP] and use [K / L] to

select “General Setting”, then press [OK].

“General Setting” menu will appear.

Use [K / L] to select “Video”, then

press [OK].

Submenu will appear.

Supplied cables used in this connection are as follows:

• RCA audio cable (L/R) x 1

• RCA video cable x 1 Please purchase the rest of the necessary cables at your local store.

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

PQRS

iji

SETUP

VIDEO

AUDIO IN

(E1)

S-VIDEO

ANTENNA

AUDIO OUT

COMPONENT VIDEO OUT

DIGITAL AUDIO OUTPUT

PCM/BITSTREAM

IN OUT

COAXIAL

LRL

PB/C

PR/C

VIDEO

OUT

front of this unit rear of this unit

VIDEO

AUDIO IN

(L1)

S-VIDEO

AUDIO O UT

COMPONENT

VIDEO OUT

IN OUT

PB/C

PR/C

VIDEO OUT

VIDEO

AUDIO IN

(E1)

S-VIDEO

AUDIO OUT

VIDEO

OUT

S-VIDEO

OUT

AUDIO OUT

VIDEO

OUT

S-VIDEO

OUT

to E1 IN

external device

(camcorder, VCR etc.)

S-video cable

to E2 IN

RCA video cable

RCA audio cable

E7H51UD.indd 41E7H51UD.indd 41 2007/02/19 18:23:352007/02/19 18:23:35

Page 42

42 EN42 EN

SETTINGS FOR AN EXTERNAL DEVICE

Recording from an External Device

Turn on the TV and press

[STANDBY-ON

y], and be sure to

select the input of the TV to which the unit is connected.

Press [OPEN/CLOSE A] to open the

disc tray. Place the disc to record properly.

Press [OPEN/CLOSE A] to close the

disc tray.

It takes a while to load

the disc.

Select the input of the unit which the

external device is connected. (E2 or E1)

• To use the input jacks on the rear of this unit;

Select “E1 (Rear)” position by using [SOURCE] or [CHANNEL

/ ].

• To use the input jacks on the front of this unit;

Select “E2 (Front)” position by using [SOURCE] or [CHANNEL

/ ].

• As for E2 and E1, you can also select external

input position by using [the Number buttons]. e.g.) For E1, press [0], [0], [1].

Press [REC MODE] to select a

recording mode.

Refer to “Recording Mode” on page 31.

(1Hr)SP(2Hr)

SPP

(2.5Hr)LP(3Hr)EP(4Hr)

SLP

(6Hr)

Press [RECORD I] on the unit to start

recording.

Start playback on the external device

to record from.

Press [STOP C] on the unit to stop

recording.

This operation may take a

while to be completed.

Before recording from an external device, refer to the instructions for the connection on page 41.

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

CHANNEL

TIMERREC MODE

AUDIOREC

RAPID PLAYCM SKIP

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

STANDBY-ON

SOURCE OPEN/CLOSE

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE

PQRS

123

456

7809

CHANNEL

+--

REC MODE

832 16

E7H51UD.indd 42E7H51UD.indd 42 2007/02/19 18:23:382007/02/19 18:23:38

Page 43

43EN 43EN

Recording

Basic SetupConnections Playback EditingIntroduction Function Setup Others

Español

SETTING A DISC TO PROTECT

Press [SETUP].

Use [K / L] to select “Disc Edit”, then

press [OK].

Use [K / L] to select “Disc Protect

OFF

ON”, then press [OK].

e.g.) DVD+RW

Disc Edit

Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON

Use [K / L] to select “Yes”, then press

[OK].

Disc Edit

Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON

Protect this disc?

Yes

A disc will be protected.

This operation may take a

while to be completed.

To prevent accidental recording, editing or erasing the titles, you can protect them from “Disc Edit” menu.

Note

To cancel the disc protect:

• When you insert a disc protected with this unit, “Disc Protect ON

OFF” will appear instead of “OFF

ON” at step 3.

Disc Edit

Edit Disc Name Erase Disc Make Edits Compatible

Disc Protect ON OFF

To release the protect for the disc, select “Yes” at step 4.

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

CHANNEL

TIMERREC MODE

AUDIOREC

RAPID PLAYCM SKIP

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

SETUP

E7H51UD.indd 43E7H51UD.indd 43 2007/02/19 18:23:392007/02/19 18:23:39

Page 44

44 EN44 EN

PLAYING THE DISCS IN OTHER DVD PLAYERS

Finalizing a Disc

Press [SETUP].

Use [K / L] to select “Disc Edit”, then

press [OK].

“Disc Edit” menu will appear.

Use [K / L] to select “Finalize”, then

press [OK].

Use [K / L] to select “Yes”, then press

[OK].

e.g.) DVD+R, DVD-R

Disc Edit

Edit Disc Name Finalize Disc Protect OFF ON

Finalize disc?

Yes

Finalizing will start.

Finalizing 90%

To cancel finalizing...

(DVD-RW only)

• To cancel finalizing at step 4, press [STOP C], select “Yes” with [K / L], then press [OK]. Finalizing is canceled and the unit will be in stop mode.

Finalizing 5%

Yes No

Do you want to cancel ?

• If appears when pressing [STOP C], you cannot cancel finalizing because the finalizing has been in certain progress.

• When selecting “No” and press [OK] or [RETURN] , finalizing will be continued.

• You cannot cancel finalizing the DVD+R/DVD-R once it has started.

This operation may take a

while to be completed.

Finalizing is completed.

You will need to finalize discs to play back in other DVD players.

Finalizing may take several minutes up to an hour. A shorter recording period on the disc will require a

longer time period for finalization. Do not unplug the power cord during finalization.

Note

• Once you have finalized a DVD+R/ DVD-R, you cannot edit or record anything on that disc.

• There is no need to finalize DVD+RW.

• When you insert a DVD-RW finalized with this unit, “Undo Finalize” will appear instead of “Finalize”.

Disc Edit

Edit Disc Name

Erase Disc Undo Finalize

Disc Protect ON OFF

To release the finalizing for the disc, select “Undo

Finalize” at step 3.

* DO NOT power off during finalization, this will result

in malfunction.

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

CHANNEL

TIMERREC MODE

AUDIOREC

RAPID PLAYCM SKIP

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

SETUP

RETURN

E7H51UD.indd 44E7H51UD.indd 44 2007/02/19 18:23:392007/02/19 18:23:39

Page 45

45EN 45EN

Recording

Basic SetupConnections Playback EditingIntroduction Function Setup Others

Español

PLAYING THE DISCS IN OTHER DVD PLAYERS

Press [SETUP] and use [K / L] to

select “General Setting”, then press [OK].

“General Setting” menu will appear.

Use [K / L] to select “Recording”,

then press [OK].

“Recording” menu will appear.

Use [K / L] to select “Auto Finalize”,

then press [OK].

Use [K / L] to select “Disc Full” or

“End of Timer Rec”, then press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

Auto Chapter Auto Finalize Make Recording Compatible

Auto Finalize

Disc Full End of Timer Rec

Use [K / L] to select “ON”, then press

[OK].

e.g.) “Disc Full”

General Setting

Playback Display Video Recording Clock Channel Reset All

Auto Chapter Auto Finalize Make Recording Compatible

Auto Finalize

Disc Full End of Timer Rec

Disc Full

ON OFF

Your setting will be activated.

Press [SETUP] to exit.

You can finalize discs automatically using this function. You can use this function to finalize discs after finishing all timer recordings and at the end of the disc space.

Auto Finalizing

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

CHANNEL

TIMERREC MODE

AUDIOREC

RAPID PLAYCM SKIP

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

SETUP

E7H51UD.indd 45E7H51UD.indd 45 2007/02/19 18:23:402007/02/19 18:23:40

Page 46

46 EN46 EN

INFORMATION ON PLAYBACK

Before you play back DVD, read the following information.

This unit is compatible to play back the following discs. To play back a DVD, make sure that it meets the requirements for region codes and color systems as described below. You can play back discs that have the following logos will play back on the unit. Other disc types are not guaranteed to play back.

Playable Discs and Files

DVD is recorded in different color systems throughout the world. The most common color system is NTSC (which is used primarily in the United States and Canada). This unit uses NTSC, so DVD you play back must be recorded in the NTSC system. You cannot play back DVD recorded in other color systems.

Color Systems

This unit has been designed to play back DVD with region 1. DVD must be labeled for ALL regions or for region 1 in order to play back on the unit. You cannot play back DVD that are labeled for other regions. Look for the symbols on the right on your DVD. If these region symbols do not appear on your DVD, you cannot play back the DVD in this unit.

The number inside the globe refers to region of the world. A DVD labeled for a specific region can only play back on the unit with the same region code.

Region Codes

LogosPlayable discs

MediaPlayable les

CD-DA

MP3

CD-RW/-R

CD-DA (audio CD)

video CD

CD-RW

CD-R

DVD-video

DVD+RW

DVD+R

DVD-RW (Finalized video mode discs only)

DVD-R (Finalized video mode discs only)

is a trademark of DVD Format/Logo Licensing Corporation.

The following discs will not play back on this unit.

• CD-ROM • Compact Disc-Interactive (CD-I)

• DVD-RAM • Video Single Disc (VSD)

• DVD-ROM • DVD-audio

• Unfinalized disc

• DVD contains MP3 and DVD or CD contains Windows Media™ Audio/JPEG files

• DVD-R or DVD-RW recorded in VR mode or non compatible recording format

On the following disc, the sound may not be heard.

• Super audio CD - Only the sound on the CD layer can be heard. The sound on the high-density super audio CD layer cannot be heard.

Unplayable Discs

E7H51UD.indd 46E7H51UD.indd 46 2007/02/19 18:23:402007/02/19 18:23:40

Page 47

47EN 47EN

Recording

Playback

Basic Setup

Connections EditingIntroduction Function Setup Others Español

You can select images or information on the menu screen by activating the PBC (playback control) function of the video CD. This unit conforms to ver.1.1 and ver. 2.0 of video CD standard with PBC function. Ver.1.1 (without PBC function): You can enjoy playback picture as well as music CD. Ver.2.0 (with PBC function): While using a video CD with PBC function, “PBC” appears on the TV screen.

Note

• PBC setting turns to “ON” when loading video CD with PBC function, thus, even after setting PBC to “OFF” and ejecting the video CD then reloading the video CD, this setting turns to “ON” automatically.

• Some operations cannot be performed while PBC function is on. Cancel PBC function temporarily to perform those operations by following the instruction below.

1) Press [SETUP].

2) Use [K / L] to select “CD Playback Mode”, then press [OK].

“CD Playback Mode” menu will appear.

3) Use [K / L] to select “PBC (Video CD only)”, then press [OK].

4) Use [K / L] to select “ON” or “OFF”, then press [OK].

Your setting will be activated.

You can play back interactive software using menu screens. Refer to instructions in the video CD.

PBC (playback control) for Video CD

The contents of DVD are generally divided into titles. Titles may be further subdivided into chapters.

Hint for DVD Playback

DVD-video

title 1 title 2

chapter 1 chapter 2 chapter 1 chapter 2 chapter 3

audio CD, video CD

track 1 track 2 track 3 track 4 track 5

MP3

folder 1 folder 2

file 1 file 2 file 3 file 4 file 5

INFORMATION ON PLAYBACK

E7H51UD.indd 47E7H51UD.indd 47 2007/02/19 18:23:412007/02/19 18:23:41

Page 48

48 EN48 EN

BASIC PLAYBACK

Direct Playback

Press [STANDBY-ON yy].

Turn on the TV and be sure to select the input to which the unit is connected.

Press [OPEN/CLOSE A] to open the

disc tray and insert your disc with its label facing up.

Align the disc to the disc tray guide.

* Make sure the disc is compatible with this unit.

(Refer to page 46 for the list of compatible discs.)

Press [OPEN/CLOSE A] to close the

disc tray.

It may take a while to load

the disc completely.

Press [PLAY B] to start playback.

If you are playing back a DVD-video or video CD with PBC function, a menu may appear.

Refer to “Using the Title / Disc Menu” on page

52.

Press [STOP C] once to stop playback

temporarily.

• Refer to “Resume Playback” on page 53.

Note

• Some discs may start playback automatically.

• You can select images or information on the menu screen by activating PBC (playback control) function (page 47).

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

CHANNEL

TIMERREC MODE

AUDIOREC

RAPID PLAYCM SKIP

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

STANDBY-ON

OPEN/CLOSE

E7H51UD.indd 48E7H51UD.indd 48 2007/02/19 18:23:412007/02/19 18:23:41

Page 49

49EN 49EN

Recording

Playback

Basic Setup

Connections EditingIntroduction Function Setup Others Español

BASIC PLAYBACK

Press [STANDBY-ON yy].

Turn on the TV and be sure to select the input to which the unit is connected.

Press [OPEN/CLOSE A] to open the

disc tray and insert your disc with its label facing up.

Align the disc to the disc tray guide.

* Make sure the disc is compatible with this unit.

(Refer to page 46 for the list of compatible discs.)

Press [OPEN/CLOSE A] to close the

disc tray.

It may take a while to load

the disc completely.

• To exit the title list, press [STOP C].

• To resume the title list, press [TITLE].

Note

• Some discs may start playback automatically.

• You can also start playback by pressing [PLAY B]

instead of [OK] at step 4.

Playback from the Title List

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

CHANNEL

TIMERREC MODE

AUDIOREC

RAPID PLAYCM SKIP

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

STANDBY-ON

OPEN/CLOSE

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE

PQRS

123

456

7809

TITLE

E7H51UD.indd 49E7H51UD.indd 49 2007/02/19 18:23:412007/02/19 18:23:41

Page 50

50 EN50 EN

Use [K / L] to select a desired title,

then press [OK].

1 SP (2Hr)

NOV/21/07 11:00AM

CH12 SP

NOV/21/07 0:20:44

NOV/22/07 11:35

AM CH13 EP

NOV/22/07 0:10:33

EMPTY TITLE 1:37:52 SP(2Hr)

• For Video CD, when “PBC (Video CD only)” in “CD playback Mode” menu is set to “ON”, the video CD main menu will appear when inserting a disc. In such case, select a numbered menu with [the Number buttons].

• Press [B] to display the next page, and press [{] to display the previous page.

If you want to see disc information, press [{ ] when the first page of the title list is displayed or press [ K ] when the first title is selected but not when “Play”, “Edit” or “Overwrite” is highlighted.

e.g.) DVD+RW

No Disc Name

Disc DVD+RW

Total Titles 3

Disc Space Used 0:30:48

Disc Protect OFF

Make Edits Compatible Needed

e.g.) DVD+R

No Disc Name

Disc DVD+R

Total Titles 5

Disc Space Used 1:30:48

Disc Protect OFF

Finalize Finalized

1. Disc name (Default “No Disc Name”)

2. Disc type (DVD+RW/DVD+R/ DVD-RW/DVD-R)

3. Total number of title (include “EMPTY TITLE”)

4. Total time of recorded disc space

5. Status of disc protection (“ON” is protected disc.)

6. Making edits compatible/finalize

• When DVD+RW is inserted:

If the disc needs to be set “Make Edits Compatible”, “Needed” is displayed. Otherwise, “Not Needed” is displayed. (Refer to page 74.)

• When DVD+R, DVD-RW or DVD-R is inserted:

If “Finalize” is done, “Finalized” is displayed. Otherwise, “Unfinalized” is displayed.

Use [K / L] to select “Play”, then

press [OK].

1 SP (2Hr)

NOV/21/07 11:00AM

CH12 SP

NOV/21/07 0:20:44

NOV/22/07 11:35

AM CH13 EP

NOV/22/07 0:10:33

EMPTY TITLE 1:37:52 SP(2Hr)

Edit

Overwrite

Play

Playback will start.

Press [STOP C] once to stop playback

temporarily.

• Refer to “Resume Playback” on page 53. To eject the disc, press [OPEN/CLOSE A] to

open the disc tray, then remove the disc before turning off the unit.

BASIC PLAYBACK

E7H51UD.indd 50E7H51UD.indd 50 2007/02/19 18:23:412007/02/19 18:23:41

Page 51

51EN 51EN

Recording

Playback

Basic Setup

Connections EditingIntroduction Function Setup Others Español

BASIC PLAYBACK

Playing Back an Audio CD and a CD-RW/-R with MP3 Files

Note

• The audio source of MP3 files cannot be recorded as digital sound by an MD or DAT deck.

• Files whose extension is other than “.mp3(MP3)” will not be listed.

• Some unplayable folders or files may be listed due to the recording status.

Follow steps 1 to 2 in “Direct

Playback” on page 48.

Press [OPEN/CLOSE A] to close the

disc tray.

It may take a while to load

the disc completely.

When an audio CD is inserted, track list will appear.

When a CD-RW/-R with MP3 files is inserted, file list will appear.

• To exit the track/file list, press [STOP C].

• To resume the track/file list, press [TITLE].

Use [K / L] to select a desired folder

or track/file, then press [OK].

e.g.) File list

File List

DISC NAME

1/ 2

A B C D 1 MP3 file1 2 MP3 file2 3 MP3 file3 4 MP3 file4

When selecting track/file:

Playback will start.

When selecting the folder (Not available for audio CD):

The files in the folder will appear. Use [K / L] to select the file or folder you want to play

back, then press [OK].

• Press [PLAY B], [OK] or [B] to move to any lower

hierarchies.

• Press [s] or [RETURN] to move back to the previous

hierarchy.

Hints for audio CD tracks and MP3 files:

• Folders are shown by

• Audio CD tracks are shown by

• MP3 files are shown by

• The system can recognize up to 255 folders, up to 99 tracks/999 files.

• Letters of a file/folder name overflowing the given space will be displayed as “...”. Unrecognizable characters will be replaced with asterisks.

• If there are no files in the folder, “No Files” will be displayed.

It is recommended that files to be played back in this unit are recorded under the following specifications:

<MP3>

• Sampling frequency : 44.1 kHz or 48 kHz.

• Constant bit rate : 112 kbps - 320 kbps

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

CHANNEL

TIMERREC MODE

AUDIOREC

RAPID PLAYCM SKIP

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

OPEN/CLOSE

DISC MENU

TITLE RETURN

E7H51UD.indd 51E7H51UD.indd 51 2007/02/19 18:23:422007/02/19 18:23:42

Page 52

52 EN52 EN

BASIC PLAYBACK

Using the Title / Disc Menu

DVD or video CD with PBC function may contain a title list, which describes the contents of the disc, or a disc menu, which guides you through the available functions in the disc.

1) Press [TITLE] or [DISC MENU] to call up the title list or disc menu.

2) Use [K / L / { / B] to make a selection, and then press [OK] to enable your selection.

3) Press [STOP C] to exit.

1) During playback, press [PAUSE F].

Playback will be paused and sound will be muted.

2) Press [PLAY B] to return to the normal playback.

Note

• You can select a numbered menu with [the Number buttons] also.

• Menus vary among discs. Refer to the information accompanying the disc for details.

• [TITLE] or [DISC MENU] will not always be active with all DVD.

• For video CD, when “PBC (Video CD only)” in “CD Playback Mode” menu is “ON”, the video CD main menu will appear when inserting a disc.

Note

• On DVD, set “Still Mode” to “Field” in “Playback” menu if pictures in the pause mode are blurred. (Refer to page 80.)

Pause

E7H51UD.indd 52E7H51UD.indd 52 2007/02/19 18:23:422007/02/19 18:23:42

Page 53

53EN 53EN

Recording

Playback

Basic Setup

Connections EditingIntroduction Function Setup Others Español

SPECIAL PLAYBACK

You can skip TV commercials to enjoy the recorded programs without interrupting.

During playback, press [CM SKIP].

Normal playback will start at 30 seconds ahead from the point you press [CM SKIP].

Every time you press [CM SKIP], the searching point will be extended by 30 seconds ahead.

You can press [CM SKIP] up to 6 times (180 seconds).

e.g.) Press [CM SKIP] once.

CM Skip 30 sec.

(forwarding 30 seconds)

Playback will return to the normal playback.

You can play back from where you stopped playing back the disc last.

1) During playback, press [STOP C].

The resume message will appear.

Resume ON

2) Press [PLAY B].

In a few seconds, playback will resume from the point at which it stopped last. You can resume playback at the same point even if you turn off the unit.

To cancel the resume playback and start playing back the disc from the beginning, press [STOP C] again while the playback is stopped.

Resume Playback

Note

• For MP3 files, playback will resume from the beginning of the file at which playback was stopped.

• Some video CD with the PBC function resume playback from the beginning of the track.

Note

• Forward/reverse speed will be indicated with icons as follows.

forward (approx. speed) 2x: 20x: 40x: reverse (approx. speed) 5x: 20x: 40x:

1) During playback, press [D] or [E].

Every time you press [D] or [E], approximate speed will be changed as follows.

Fast forward or fast reverse playback across titles (for DVD) or files (for MP3 files) is not possible.

20x

normal

speed

playbac k

2x 20x5x 40x40x

ghg

For video CD, approximate forward/reverse speeds are 2x, 8x, 16x.

For audio CD, MP3 files, approximate speed is fixed at 8x with sound (indicated with

/ ).

2) Press [PLAY B] to return to the normal playback.

Fast Forward / Fast Reverse Playback

Skipping TV Commercials During Playback

E7H51UD.indd 53E7H51UD.indd 53 2007/02/19 18:23:432007/02/19 18:23:43

Page 54

54 EN54 EN

SPECIAL PLAYBACK

Rapid playback function is available only during playback.

This function is available only on discs recorded in the Dolby Digital format, and plays back in a slightly faster/ slower speed while keeping the sound quality just as normal playback.

1) During playback, press [RAPID PLAY].

Press [RAPID PLAY] once during playback. Plays back approximately at 0.8 times of normal playback.

Press [RAPID PLAY] twice during playback. Plays back approximately at 1.3 times of normal playback.

B :

Press [RAPID PLAY] 3 times to play back in normal speed. No effects.

2) Press [PLAY B] to continue the normal playback.

Rapid Playback

Note

• Audio (language) setting cannot be changed while using this mode.

• This feature may not work at some point in a disc.

• Audio is PCM during rapid playback mode except when using digital audio connection.

• When using digital audio connection (COAXIAL), the LPCM sound (2 channel) will be output.

Step by Step Playback

1) During playback, press [PAUSE F].

Playback will be paused and sound will be muted.

2) Press [G] repeatedly.

Playback will advance one frame (or step) at a time when you press [G] with the sound muted.

To play back step by step backward: Press [H] repeatedly. Every time you press the button, the playback will go

backward by one frame.

• Press and hold [H] / [G] to reverse/ advance

continuously.

3) Press [PLAY B] to continue the normal playback.

Note

• Only step by step forward playback is available for playing back video CD.

Note

• Forward/reverse speed will be indicated with icons as follows.

forward (approx. speed) 1/16x: 1/8x: 1/3x: reverse (approx. speed) 1/16x: 1/8x: 1/4x:

• Only slow forward is available when playing back video CD.

Slow Forward / Slow Reverse Playback

1) During playback, press [PAUSE F]. Then press [D] or [ E].

Every time you press [D] or [E], approximate speed will be changed as follows. (The sound will remain muted.)

1/8x

pause

1/16x 1/8x1/16x 1/3x1/4x

ghg

To return to the normal playback, press [PLAY B].

E7H51UD.indd 54E7H51UD.indd 54 2007/02/19 18:23:432007/02/19 18:23:43

Page 55

55EN 55EN

Recording

Playback

Basic Setup

Connections EditingIntroduction Function Setup Others Español

SPECIAL PLAYBACK

Zoom

Note

• When selecting a smaller factor than the current one, the zoom area will not be displayed.

• To exit the zoom menu, press [DISPLAY] again at step 1.

• To cancel the zoom function, select “x1.0” using

[K / L], then press [OK].

1) During playback, press [DISPLAY].

2) Use [{ / B] to select

, then press [OK] within 1 second or wait for 1 second to display the selection menu.

e.g.) DVD-video

1/ 5 1/ 5

DVD

0:01:00 / 1:23:45

Video

3) Use [K / L] to select a desired zoom factor to zoom, then press [OK].

1/ 5 1/ 5

DVD

× 1.2 × 1.5 × 2.0

0:01:00 / 1:23:45

Video

Zoom menu will appear. There are four options (x1.0, x1.2, x1.5 and x2.0), these are displayed

excluding the current zoom rate.

Zoom area will be displayed.

4) Use [K / L / { / B] to select a desired zoom position, then press [OK].

Zoom playback will start.

This feature allows you to assign a specific point on a disc to be called back later.

1) During playback, press [DISPLAY].

2) Use [{ / B] to select

, then press [OK] within 1 second or wait for 1 second to display the marker list.

e.g.) DVD-video

1/ 5 1/ 5

DVD

0:01:00 / 1:23:45

Video

3) Use [K / L] to select a desired marker number. When it reaches the desired point, press [OK].

1/ 5 1/ 5

DVD

---

0:01:00 / 1:23:45

Video

The title (track) number and the time will be displayed.

4) To return to the marker later: Use [K / L] to select the desired marker number,

then press [OK].

Marker Setting

Note

• To clear a marker, select the marker number to be

cleared, then press [CLEAR].

• All markers will be erased when you operate these operations listed below.

– Opening the disc tray – Turning off the power – Record on a recordable disc

• You can mark up to 6 points.

• Marker setting is not available when you play back the video CD with PBC function.

E7H51UD.indd 55E7H51UD.indd 55 2007/02/19 18:23:442007/02/19 18:23:44

Page 56

56 EN56 EN

Using [H] / [G]

1) During playback, press [G] to skip the current title or chapter and move to the next.

The title or chapter will move forward by one at a time.

• If there is no chapter in one title, the current title will

be skipped.

To go back to the beginning of the current title or chapter, press [H].

Press it repeatedly to go to the previous title or chapter. The title or chapter will move backward one at a time.

Using [DISPLAY]

1) During playback, press [DISPLAY].

2) Use [{ / B] to select

, then press [OK].

e.g.) DVD-video

1/ 5 1/ 5

DVD

0:01:00 / 1:23:45

Video

The number next to will be highlighted.

3) Title: Use [K / L] or [the Number buttons] to enter a

desired title number to search, then press [OK].

Title search will start.

Chapter: Press [B] to move to the number next to

for

chapter. Use [K / L] or [the Number buttons] to enter a

desired chapter number to search, then press [OK].

After the search, playback will start automatically.

Title / Chapter Search

Using [H] / [G]

1) During playback, press [G] to skip the current track/file and move to the next.

The track/file will move forward one at a time. To go back to the beginning of the current track/file,

press [H]. Press it repeatedly to go to the previous track/file. The

track/file will move backward one at a time.

Track Search

Note

• During CD playback you can enter a track number

directly using [the Number buttons] for track search without displaying the menu.

• Track search is not available when you play back the video CD with PBC function.

Using [DISPLAY]

1) During playback, press [DISPLAY].

2) Use [{ / B] to select

, then press [OK].

e.g.) audio CD

1/ 5CD0:00:15 / 0:05:00

e.g.) MP3 files

1/ 5 0:00:15

MP3

The number next to will be highlighted.

3) Use [K / L] or [the Number buttons] to enter a desired track/file number to search, then press [OK].

After the search, playback will start automatically.

Note

• In search mode display, total numbers of each search contents (title/chapter/time) are shown as a denominator.

1/ 5 1/ 5 0:01:00 / 1:23:45

DVD

Video

total number of titles

total number of chapters

total time of the title

E7H51UD.indd 56E7H51UD.indd 56 2007/02/19 18:23:452007/02/19 18:23:45

Page 57

57EN 57EN

Recording

Playback

Basic Setup

Connections EditingIntroduction Function Setup Others Español

1) During playback, press [DISPLAY].

2) Use [{ / B] to select

, then press [OK].

e.g.) DVD-video

1/ 5 1/ 5 0:01:00 / 1:23:45

DVD

Video

e.g.) audio CD

1/ 5CD0:00:15 / 0:05:00

The number next to will be highlighted. To move to the number next to

, press [B].

When time search is not available,

and time

counter are not displayed.

3) Use [K / L / { / B] or [the Number buttons] to enter a desired time to search, then press [OK].

After the search, playback will start automatically.

Note

• Time search is available only in the same track, file or title.

• Time search is not available when you play back the video CD with PBC function.

Time Search

E7H51UD.indd 57E7H51UD.indd 57 2007/02/19 18:23:452007/02/19 18:23:45

Page 58

58 EN58 EN

REPEAT / RANDOM / PROGRAM PLAYBACK

Repeat Playback

Random Playback

Available repeat function may vary depending the discs.

1) During playback press [DISPLAY].

2) Use [{ / B] to select

, then press [OK] within 1 second or wait for 1 second to display the selection menu.

1/ 5 1/ 5

DVD

0:01:00 / 1:23:45

Video

3) Use [K / L] to select a desired option to repeat, then press [OK].

e.g.) DVD-video

1/ 5 1/ 5

DVD

OFF Title Chapter A – B

0:01:00 / 1:23:45

Video

e.g.) audio CD, video CD

1/ 5CD0:00:15 / 0:05:00

OFF

Track All

A – B

e.g.) MP3 files

1/ 5 0:00:15

MP3

OFF

Track All Group

The selected repeat playback will start.

Repeat

Title

1/ 5 1/ 5

DVD

0:01:00 / 1:23:45

Title:

The current title will be played back repeatedly.

Chapter:

The current chapter will be played back repeatedly.

All:

The current disc will be played back repeatedly.

A-B:

Desired section can be played back repeatedly.

1) Use [K / L] to select “A-B”, then press [OK].

2) Press [OK] at the desired starting point A.

3) Press [OK] at the desired ending point B.

Track:

The current track or file will be played back repeatedly.

Group:

The current folder will be played back repeatedly.

You can play back a disc randomly instead of playing back in the original order.

1) Press [SETUP].

2) Use [K / L] to select “CD Playback Mode”, then press [OK].

“CD Playback Mode” menu will appear.

3) Use [K / L] to select “Random Play”, then press [OK].

Random playback will start.

Note

• To cancel random playback, press [STOP C] twice

during random playback. “OFF” appears on the TV screen.

• For video CD with PBC function, the PBC setting will be switched to off automatically when you start random playback.

Note

• Point B for the repeat A-B playback should be set within the same title or track as point A.

• To cancel the repeat playback, select “OFF” at step 3. The repeat setting will also be canceled when you stop playback.

• You cannot select “Group” during the random playback of MP3 files.

• Repeat playback is not available when you play back the video CD with PBC function.

E7H51UD.indd 58E7H51UD.indd 58 2007/02/19 18:23:452007/02/19 18:23:45

Page 59

59EN 59EN

Recording

Playback

Basic Setup

Connections EditingIntroduction Function Setup Others Español

Program Playback

Note

• To erase tracks you selected, press [CLEAR] at step 4.

• You can make program settings up to 50 tracks.

• To cancel program playback, press [STOP C] twice

during program playback. “OFF” appears on the TV screen.

• You may also select a desired track using [the Number buttons] at step 4.

• For video CD with PBC function, the PBC setting will be switched to off automatically when you start program playback.

REPEAT / RANDOM / PROGRAM PLAYBACK

You can program the disc to play back in your desired order.

1) Press [SETUP].

2) Use [K / L] to select “CD Playback Mode”, then press [OK].

“CD Playback Mode” menu will appear.

3) Use [K / L] to select “Program Play”, then press [OK].

4) Use [K / L] to select a desired track, then press [OK] or [B].

CD Playback Mode

Program Play

0:00:00Total

-- -- -- -- -- -- -- -- --

-- -- -- -- -- -- -- -- -- --

Repeat this step until you program all the desired tracks.

5) Press [PLAY B].

CD Playback Mode

Program Play

0:31:07Total

04 10 06 -- -- -- -- -- --

-- -- -- -- -- -- -- -- -- --

Program playback will start.

E7H51UD.indd 59E7H51UD.indd 59 2007/02/19 18:23:462007/02/19 18:23:46

Page 60

60 EN60 EN

DVD-video may have subtitles in 1 or more languages. Available subtitle languages can be found on the disc case. You can switch subtitle languages anytime during playback.

1) During playback, press [DISPLAY].

2) Use [{ / B] to select

, then press [OK] within 1 second or wait for 1 second to display the selection menu.

e.g.) DVD-video

1/ 5 1/ 5

DVD

0:01:00 / 1:23:45

Video

3) Use [K / L] to select a desired subtitle language, then press [OK].

1/ 5 1/ 5

DVD

0:01:00 / 1:23:45

OFF

1.English

Video

Subtitle will be displayed in the selected language. When selecting “OFF”, subtitle will disappear.

SELECTING THE FORMAT OF AUDIO AND VIDEO

Switching Subtitles

Note

• Some discs will only allow you to change the subtitle

from the disc menu. Press [TITLE] or [DISC MENU] to display the disc menu.

• If a 4-digit language code appears in the subtitle menu, refer to the “LANGUAGE CODE” on page 91.

You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back.

When playing back a DVD-video recorded with 2 or more soundtracks (these are often in different languages), you can switch them during playback.

When playing back video CD, audio CD you can switch “L/R”(stereo), “L”(left) or “R”(right).

1) During playback press [DISPLAY], then proceed to step 2), or press [AUDIO] then proceed to step 3).

2) Use [{ / B] to select

, then press [OK] within 1 second or wait for 1 second to display the selection menu.

3) Use [K / L] to select a desired audio soundtrack or audio channel, then press [OK].

For DVD-video

• Audio soundtrack will switch.

1/ 5 1/ 5

DVD

0:01:00 / 1:23:45

1.Dolby Digital 5.1ch English

2.Dolby Digital 2ch English

Video

• If the title contains both main and sub audio, you can

further select “L” (main), “R” (sub), or “L/R” (mixed of main and sub).

For audio CD, video CD

• Audio channel will switch. e.g.) audio CD

1/ 5CD0:00:15 / 0:05:00

1. L/R

2. L

3. R

Switching Audio Soundtrack

Note

• Some discs will only allow you to change the

soundtrack from the disc menu. Press [TITLE] or [DISC MENU] to display the disc menu.

E7H51UD.indd 60E7H51UD.indd 60 2007/02/19 18:23:462007/02/19 18:23:46

Page 61

61EN 61EN

Recording

Playback

Basic Setup

Connections EditingIntroduction Function Setup Others Español

You can enjoy stereophonic virtual space through your existing 2 channel stereo system.

1) During playback, press [DISPLAY].

2) Use [{ / B] to select

, then press [OK] within 1 second or wait for 1 second to display the selection menu.

e.g.) DVD-video

1/ 5 1/ 5

DVD

0:01:00 / 1:23:45

Video

3) Use [K / L] to select “OFF”, “Type 1” or “Type 2”, then press [OK].

e.g.) DVD-video

1/ 5 1/ 5

DVD

0:01:00 / 1:23:45

OFF Type 1 Type 2

Video

OFF : no effect Type 1 : natural effect Type 2 : emphasized effect

Note

• Select “OFF” in a case sound is distorted.

• The setting will be kept even when the unit is turned off.

Switching Virtual Surround System

SELECTING THE FORMAT OF AUDIO AND VIDEO

Switching Camera Angles

Reducing Block Noise

Some DVD-video have scenes shot from 2 or more angles. Angle information should be on the disc case if the disc contains multi-angle scenes.

1) During playback, press [DISPLAY].

2) Use [{ / B] to select

, then press [OK].

e.g.) DVD-video

1/ 5 1/ 5

DVD

0:01:00 / 1:23:45

Video

Angle icon appears when a switching camera angle is available.

Angle will switch each time you press [OK].

1) During playback, press [DISPLAY].

2) Use [{ / B] to select , then press [OK] within 1 second or wait for 1 second to display the selection menu.

e.g.) DVD-video

1/ 5 1/ 5

DVD

0:01:00 / 1:23:45

Video

3) Use [K / L] to select a desired option, then press [OK].

1/ 5 1/ 5

DVD

0:01:00 / 1:23:45

Video

OFF Type 1 Type 2

Your setting will be activated. This function reduces noise in the playback picture. If

noises appear on the TV screen during playing back discs recorded in long time recording mode such as EP or SLP, select “Type 1” or “Type 2”.

(“Type 2” is more effective.) When playing back discs with a few noises such as

DVD-video, select “OFF”.

Note

• Angle icon does not appear on the TV screen in a case you set “Angle Icon” to “OFF” in “Playback” menu. Refer to page 80.

E7H51UD.indd 61E7H51UD.indd 61 2007/02/19 18:23:462007/02/19 18:23:46

Page 62

62 EN62 EN

INFORMATION ON DISC EDITING

Guide to a Title List Editing Discs

Title list allows you to check the titles recorded on the disc easily. You can choose a title to play back from this list and easily edit the titles as you prefer.

Press [TITLE].

Chapter Mark

Hide Chapter

Index Picture

Title Dividing

Edit Title Name

Title Delete

Edit

NOV/22/07 11:35AM CH13 EP

0:00:59

NOV/21/07 11:00AM

CH12 SP

NOV/21/07 0:20:44

Overwrite

NOV/22/07 11:35

AM CH13 EP

NOV/22/07 0:10:33

EMPTY TITLE 1:37:52 SP(2Hr)

Play

Edit

SP (2Hr)

789

1. Title list: List of the titles recorded on the disc, and

their information.

2. Arrow: Indicating there is a previous / next page.

3. Title information: On the first line, title name

(editable) is displayed. On the second line, the length of the title is displayed. Empty title: The portion of the disc where there is no recordings are made. As for the empty title, available recording time by the selected recording mode is displayed on the second line.

4. Recording mode: Currently selected recording mode

is displayed here.

5. Capacity indicator: Indicating the position and the

amount of each title in the disc. The portion for the selected title is highlighted.

6. Thumbnails: A cut from the recorded content is

displayed here.

7. Submenu: Submenus for the selected menu are

displayed here.

8. Title name (editable): If you do not name the title,

the recorded date, time, channel, and the recording mode are displayed here.

9. Progress bar: Indicating the progress of the

playback.

10. Preview window: Preview of the selected title is

displayed here.

11. Playback status: Indicating the current playback

status of the selected title.

Press [STOP C] to exit the title list.

Note

• When selecting “Edit” on pop-up menu of the title list and edit the title, the title list is displayed after writing the edited contents onto the disc.

• The capacity indicator in the right side of the title list may not indicate the precise capacity in the disc.

• The capacity indicator may not indicate the capacity for the titles of which recording time is short.

• Once you have finalized a DVD+R/ DVD-R, you cannot edit or record anything on that disc.

You can edit discs for the following items. Be sure that once you edit titles, they will not remain as original.

• Deleting Titles (Refer to page 63.)

• Putting Names on Titles (Refer to page 64.)

• Setting Chapter Marks (Refer to page 65.)

• Clearing Chapter Marks (Refer to pages 66-67.)

• Hiding Chapters (Refer to page 68.)

• Setting Pictures for Thumbnails (Refer to page 69.)

• Dividing a Title (DVD+RW/DVD-RW only) (Refer to page 70.)

• Putting Name on Disc (Refer to page 71.)

• Setting or Releasing Disc Protect (Refer to page 72.)

• Erasing Disc (Refer to page 73.)

• Making Edits Compatible (Refer to page 74.)

E7H51UD.indd 62E7H51UD.indd 62 2007/02/19 18:23:472007/02/19 18:23:47

Page 63

63EN 63EN

Playback

Editing

Recording

Basic Setup

ConnectionsIntroduction Function Setup Others Español

EDITING DISCS

Use [K / L] to select “Edit”, then

press [OK].

NOV/21/07 11:00AM

CH12 SP

NOV/21/07 0:20:44

Overwrite

NOV/22/07 11:35

AM CH13 EP

NOV/22/07 0:10:33

EMPTY TITLE 1:37:52 SP(2Hr)

SP (2Hr)

Edit

Play

Use [K / L] to select “Title Delete”,

then press [OK].

Edit

Title Delete

Edit Title Name

Chapter Mark

Index Picture

Title Dividing

Hide Chapter

NOV/21/07 11:00AM CH12 SP

0:00:59

Use [K / L] to select “Yes”, then press

[OK].

Edit - Title Delete

Yes

0:00:59

NOV/21/07 11:00AM CH12 SP

After that, “Are you sure?” will appear, select “Yes” and then press [OK].

Title will be deleted. Data will be written onto the disc momentarily.

Writing to Disc 90%

This operation may take a

while to be completed.

After editing is complete, the title list will appear. e.g.) DVD+RW/DVD-RW

EMPTY TITLE 0:21:14 SP(2Hr)

NOV/22/07 11:35

AM CH13 EP

NOV/22/07 0:10:33

EMPTY TITLE 1:37:52 SP(2Hr)

SP (2Hr)

You can delete titles which you do not need anymore. Please be advised that the titles once deleted cannot be

brought back to the disc. For DVD+RW/DVD-RW, when the last recorded title in the

title list is deleted, the available disc space to record on will be increased. For DVD+R/DVD-R, the disc space to record on will not be changed.

Note

• Deleted part of the titles in the capacity indicator changes in color.

• As for DVD+RW/DVD-RW if you delete the title, deleted title will be displayed as “EMPTY TITLE”.

Deleting Titles

Press [TITLE].

Use [K / L] to select a desired title,

then press [OK].

NOV/21/07 11:00AM

CH12 SP

NOV/21/07 0:20:44

NOV/22/07 11:35

AM CH13 EP

NOV/22/07 0:10:33

EMPTY TITLE 1:37:52 SP(2Hr)

SP (2Hr)

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

PQRS

SOURCE

123

456

iji

DISPLAY OPEN/CLOSE

TITLE

E7H51UD.indd 63E7H51UD.indd 63 2007/02/19 18:23:472007/02/19 18:23:47

Page 64

64 EN64 EN

EDITING DISCS

Putting Names on Titles

Use [K / L] to select “Yes”, then press

[OK].

Edit - Edit Title Name

Yes

MY FAVORITE

0:00:59

The name you entered will be activated for the title.

After this operation is completed,

press [RETURN] to exit.

Data will be written onto the disc momentarily.

This operation may take a

while to be completed.

You can put title names on the titles and change the names from this menu.

1) Use [K / L] to select a desired character set, then press [OK].

2) Follow the list below, use [the Number buttons] repeatedly until the desired letter appears.

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

abc

def

ghi

jkl

mno

pqrs

tuv

wxyz

! ” # $ % & ’ ( ) *

+ , - . / : ; < = >

? @ [ ] ^ _ { | }

ABC

abc @ ! ?

123

(*1) (*1)

(*2)

Select

Press

*1 Press 1, character set will be changed to the “ @!? ”

mode automatically.

*2 Press

to 9, character set will be changed to the

previous input mode automatically.

• To delete letters, press [CLEAR] repeatedly.

Holding [CLEAR] to delete all letters.

• Use [s / B] to move the cursor to the left and right.

• You can enter up to 30 letters.

Note

• Undefined letters in a title name are shown by “*”. If you delete them, adjoining letters may change to “*” or other.

Guide to Edit Title Name

Follow steps 1 to 3 in “Deleting

Titles” on page 63 to display “Edit” menu.

Use [K / L] to select “Edit Title

Name”, then press [OK].

Edit

Title Delete

Edit Title Name

Chapter Mark

Index Picture

Title Dividing

Hide Chapter

NOV/21/07 11:00AM CH12 SP

0:00:59

To enter a title name, follow the

steps of “Guide to Edit Title Name” on this page.

Edit - Edit Title Name

abc

ABC

123

@! ?

0:00:59

character set

area for entering title names

When you finish entering a title name, press [OK].

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

PQRS

SOURCE

123

456

iji

DISPLAY OPEN/CLOSE

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE

PQRS

123

456

7809

CLEAR

RETURN

E7H51UD.indd 64E7H51UD.indd 64 2007/02/19 18:23:472007/02/19 18:23:47

Page 65

65EN 65EN

Playback

Editing

Recording

Basic Setup

ConnectionsIntroduction Function Setup Others Español

EDITING DISCS

Setting Chapter Marks

Follow steps 1 to 3 in “Deleting

Titles” on page 63 to display “Edit” menu.

Use [K / L] to select “Chapter Mark”,

then press [OK].

Submenu will appear.

Press [PLAY B] and then [PAUSE F]

to decide the point at which you will create a new chapter mark.

• It is convenient to use [H], [G], [E] and [D] for finding the point to add a

new chapter mark.

Use [K / L] to select “Add”, then press

[OK].

Delete

Delete All

Add

NOV/21/07 11:00AM CH12 SP

0:00:59

Chapter 2/ 2

Edit - Chapter Mark

Use [K / L] to select “Yes”, then press

[OK].

Edit - Chapter Mark - Add

Yes

NOV/21/07 11:00AM CH12 SP

0:00:59

Chapter 2/ 2

A new chapter mark will be added.

Press [RETURN] twice to exit.

Data will be written onto the disc momentarily.

This operation may take a

while to be completed.

You can put chapter marks in each title. Once a chapter is marked, you can use it for the chapter search feature.

Note

• When the number of chapter marks in a title is 99 and the number of chapter marks in a disc is 254, chapter marks cannot be added.

• Besides the above-mentioned, it is not likely to be able to add according to recorded time and number of chapters.

• Remaining time of the disc may decrease when adding chapter marks or increase when clearing chapter marks depending on the recording time or edited contents.

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

CHANNEL

TIMERREC MODE

AUDIOREC

RAPID PLAYCM SKIP

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

RETURN

h g

E7H51UD.indd 65E7H51UD.indd 65 2007/02/19 18:23:482007/02/19 18:23:48

Page 66

66 EN66 EN

EDITING DISCS

Clearing Chapter Marks

Follow steps 1 to 3 in “Deleting

Titles” on page 63 to display “Edit” menu.

Use [K / L] to select “Chapter Mark”,

then press [OK].

Submenu will appear.

Use [H] / [G] to select a chapter

mark to be deleted.

Use [K / L] to select “Delete”, then

press [OK].

Use [K / L] to select “Yes”, then press

[OK].

Edit - Chapter Mark - Delete

Yes

NOV/21/07 11:00AM CH12 SP

0:00:59

Chapter 2/ 2

The selected chapter mark will be deleted.

Press [RETURN] twice to exit.

Data will be written onto the disc momentarily.

This operation may take a

while to be completed.

Note

• Remaining time of the disc may decrease when adding chapter marks or increase when clearing chapter marks depending on the recording time or edited contents.

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

CHANNEL

TIMERREC MODE

AUDIOREC

RAPID PLAYCM SKIP

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

RETURN

E7H51UD.indd 66E7H51UD.indd 66 2007/02/19 18:23:482007/02/19 18:23:48

Page 67

67EN 67EN

Playback

Editing

Recording

Basic Setup

ConnectionsIntroduction Function Setup Others Español

EDITING DISCS

Clearing Chapter Marks (cont’d)

To delete all chapter marks:

Follow steps 1 to 3 in “Deleting

Titles” on page 63 to display “Edit” menu.

Use [K / L] to select “Chapter Mark”,

then press [OK].

Submenu will appear.

Use [K / L] to select “Delete All”,

then press [OK].

Use [K / L] to select “Yes”, then press

[OK].

Edit - Chapter Mark - Delete All

Yes

NOV/21/07 11:00AM CH12 SP

0:00:59

Chapter 2/ 2

Use [K / L] to select “Yes”, then press

[OK].

Chapter 2/ 2

Edit - Chapter Mark - Delete All

Yes

Are you sure?

NOV/21/07 11:00AM CH12 SP

0:00:59

All chapter marks will be deleted.

Press [RETURN] twice to exit.

Data will be written onto the disc momentarily.

This operation may take a

while to be completed.

Note

• Remaining time of the disc may decrease when adding chapter marks or increase when clearing chapter marks depending on the recording time or edited contents.

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

CHANNEL

TIMERREC MODE

AUDIOREC

RAPID PLAYCM SKIP

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

RETURN

E7H51UD.indd 67E7H51UD.indd 67 2007/02/19 18:23:492007/02/19 18:23:49

Page 68

68 EN68 EN

EDITING DISCS

Hiding Chapters

Follow steps 1 to 3 in “Deleting

Titles” on page 63 to display “Edit” menu.

Use [K / L] to select “Hide Chapter”,

then press [OK].

Submenu will appear.

Use [H] / [G] to decide the

chapter to be hidden.

Use [K / L] to select “Hidden”, then

press [OK].

Edit - Hide Chapter

Hidden

Visible

0:00:59

NOV/21/07 11:00AM CH12 SP

Chapter 2/ 2 Visible

After this operation is completed,

press [RETURN] twice to exit.

Data will be written onto the disc momentarily.

This operation may take a

while to be completed.

If you want hidden chapters to be “Visible”, select the chapter to be shown. Then use [K / L] to select “Visible” at the step 4 on this page.

Data will be written onto the disc momentarily. After that, title list is displayed.

Note

• ”Hidden” will be displayed in the preview window while previewing the hidden chapter.

• When you make all chapters in the title “Hidden”, “Hidden” is displayed in a thumbnail of the title list.

NOV/22/07 11:35AM

CH13 EP

NOV/22/07 0:10:33

NOV/21/07 11:00

AM CH12 SP

NOV/21/07 0:20:44

Hidden

EMPTY TITLE 1:37:52 SP(2Hr)

SP (2Hr)

You can hide chapters from the title list. Hidden chapters are skipped during playback.

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

CHANNEL

TIMERREC MODE

AUDIOREC

RAPID PLAYCM SKIP

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

RETURN

E7H51UD.indd 68E7H51UD.indd 68 2007/02/19 18:23:492007/02/19 18:23:49

Page 69

69EN 69EN

Playback

Editing

Recording

Basic Setup

ConnectionsIntroduction Function Setup Others Español

EDITING DISCS

Setting Pictures for Thumbnails

Follow steps 1 to 3 in “Deleting

Titles” on page 63 to display “Edit” menu.

Use [H], [G], [E], [D],

[PAUSE F] and [PLAY B] to decide the picture you want to select as a thumbnail.

Use [K / L] to select “Index Picture”,

then press [OK].

Use [K / L] to select “Yes”, then press

[OK].

Yes

Edit - Index Picture

NOV/21/07 11:00AM CH12 SP

0:00:59

A picture for thumbnail will be set.

Press [RETURN] to exit.

Data will be written onto the disc momentarily.

This operation may take a

while to be completed.

Note

• If the selected picture for a thumbnail is overwritten, the index picture is reset to the first scene of the title.

You can set your desired scene as a thumbnail for each title.

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

CHANNEL

TIMERREC MODE

AUDIOREC

RAPID PLAYCM SKIP

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

RETURN

h g

E7H51UD.indd 69E7H51UD.indd 69 2007/02/19 18:23:492007/02/19 18:23:49

Page 70

70 EN70 EN

EDITING DISCS

Dividing a Title

Follow steps 1 to 3 in “Deleting

Titles” on page 63 to display “Edit” menu.

Use [H], [G], [E], [D],

[PAUSE F] and [PLAY B] to decide the point at which you will divide the title.

Use [K / L] to select “Title Dividing”,

then press [OK].

Use [K / L] to select “Yes”, then press

[OK].

Yes

Edit - Title Dividing

NOV/21/07 11:00AM CH12 SP

0:00:59

The title will be divided into 2 new titles. Both title names are identical, and index pictures

are reset to the first scene at this point.

Data will be written onto the disc momentarily.

This operation may take a

while to be completed.

You can divide one title into 2 new titles.

Note

• You cannot divide a title of the disc when the number of recording titles reaches the maximum of 49, and the number of recording chapters reaches the maximum of 254.

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

CHANNEL

TIMERREC MODE

AUDIOREC

RAPID PLAYCM SKIP

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

h g

E7H51UD.indd 70E7H51UD.indd 70 2007/02/19 18:23:492007/02/19 18:23:49

Page 71

71EN 71EN

Playback

Editing

Recording

Basic Setup

ConnectionsIntroduction Function Setup Others Español

Putting Name on Disc

Press [STOP C] if you are playing back a disc.

Press [SETUP].

Use [K / L] to select “Disc Edit”, then

press [OK].

Use [K / L] to select “Edit Disc

Name”, then press [OK].

e.g.) DVD+RW

Disc Edit

Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON

A window for entering a title name will appear.

Edit Disc Name

abc

ABC

123

@! ?

0:00:00

No Disc Name

Disc DVD+RW

Total Titles 3

Disc Space Used 0:30:48

Disc Protect OFF

Make Edits Compatible Needed

To enter a disc name, follow the steps

of “Guide to Edit Title Name” on page

64.

When you finish entering a title name, press

[OK].

Use [K / L] to select “Yes”, then press

[OK].

Edit Disc Name

0:00:00

MY FAVORITE DISC

Yes

No Disc Name

Disc DVD+RW

Total Titles 3

Disc Space Used 0:30:48

Disc Protect OFF

Make Edits Compatible Needed

The name you entered will be activated for the title. Data will be written onto the disc momentarily.

This operation may take a

while to be completed.

Note

• You cannot select “Disc Edit” when finalized DVD+R or DVD-R is inserted.

You can put a name on the disc and change it from this menu.

EDITING DISCS

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

CHANNEL

TIMERREC MODE

AUDIOREC

RAPID PLAYCM SKIP

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

SETUP

E7H51UD.indd 71E7H51UD.indd 71 2007/02/19 18:23:492007/02/19 18:23:49

Page 72

72 EN72 EN

EDITING DISCS

Setting or Releasing Disc Protect

Follow steps 1 to 2 in “Putting Name

on Disc” on page 71 to display “Disc Edit” menu.

Use [K / L] to select “Disc Protect

OFF

ON”, then press [OK].

e.g.) DVD+RW

Disc Edit

Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON

• If the disc is already protected, “Disc Protect ON OFF” will appear instead of “Disc Protect OFF ON”.

Use [K / L] to select “Yes”, then press

[OK].

Disc Edit

Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON

Protect this disc?

Yes

Data will be written onto the disc momentarily.

This operation may take a

while to be completed.

To prevent accidental editing, or erasing the titles, you can protect them.

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

CHANNEL

TIMERREC MODE

AUDIOREC

RAPID PLAYCM SKIP

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

E7H51UD.indd 72E7H51UD.indd 72 2007/02/19 18:23:502007/02/19 18:23:50

Page 73

73EN 73EN

Playback

Editing

Recording

Basic Setup

ConnectionsIntroduction Function Setup Others Español

EDITING DISCS

Erasing Disc

Press [STOP C] if you are playing back a disc.

Follow steps 1 to 2 in “Putting Name

on Disc” on page 71 to display “Disc Edit” menu.

Use [K / L] to select “Erase Disc”,

then press [OK].

e.g.) DVD+RW

Disc Edit

Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON

Use [K / L] to select “Yes”, then press

[OK].

Disc Edit

Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON

When you press “Yes”, all the

contents in the disc will be erased.

Are you sure to erase the disc?

Yes

Data will be written onto the disc momentarily.

This operation may take a

while to be completed.

You can erase all titles on a disc.

Note

• When you select “Yes” at step 3, all contents of the disc will be erased.

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

CHANNEL

TIMERREC MODE

AUDIOREC

RAPID PLAYCM SKIP

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

E7H51UD.indd 73E7H51UD.indd 73 2007/02/19 18:23:502007/02/19 18:23:50

Page 74

74 EN74 EN

EDITING DISCS

Making Edits Compatible

Press [STOP C] if you are playing back a disc.

Follow steps 1 to 2 in “Putting Name

on Disc” on page 71 to display “Disc Edit” menu.

Use [K / L] to select “Make Edits

Compatible”, then press [OK].

Disc Edit

Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON

Use [K / L] to select “Yes”, then press

[OK].

Disc Edit

Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON

Activate the Make Edits Compatible?

Yes

Data will be written onto the disc momentarily.

This operation may take a

while to be completed.

If you have added or deleted chapters, or made chapters hidden, you must perform “Make Edits Compatible” to see those effects on other unit.

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

CHANNEL

TIMERREC MODE

AUDIOREC

RAPID PLAYCM SKIP

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

E7H51UD.indd 74E7H51UD.indd 74 2007/02/19 18:23:502007/02/19 18:23:50

Page 75

75EN 75EN

Editing

Function Setup

PlaybackRecording

Basic Setup

ConnectionsIntroduction Others Español

LIST OF SETTINGS

The following table is the contents which you can set and the default setting. Refer to the following table for useful operation.

Setup Items (highlight is the default) Contents

General Setting

Playback

Pages 77-80

Parental Lock

OFF

level 8 [Adult] to 1 [Kid Safe]

Set the parental level for DVD playback.

Disc Audio Dynamic Range

Control

OFF

Compressing the range of sound volume.

PCM

48kHz

96kHz

Set whether the sound recorded in 96kHz will be down sampled in 48kHz.

Dolby Digital PCM

Stream

Set the type of sound signal which outputs from the digital audio output jack.

Disc Menu Language

English

French Spanish Other

Set the language for disc menu language.

Audio Language

Original

English French Spanish Other

Set the language for audio.

Subtitle Language

OFF

English French Spanish Other

Set the language for subtitles.

Angle Icon

OFF

Set whether or not to display the angle icon.

Still Mode

Auto

Field Frame

Set the type of still image in pausing playback.

Display

Pages 81-82

OSD Language

English

Français Español

Set the language for OSD (on-screen display).

Screen Saver OFF

5minutes

10minutes

15minutes 30miniutes

Set the idling time before the screen saver starts.

CC Style

Pages 28-30

DTV CC

OFF

Service1 Service2 Service3 Service4 Service5 Service6

Set the type of the DTV closed caption.

User Setting ON

OFF

Set the whether or not CC style setting is effective.

Font Size

Middle

Large Small

Set font size of the displayed caption.

Font Style

Style1

Style2 Style3 Style4 Style5 Style6 Style7 Style8

Set font style of the displayed caption.

Edge Type

None

Raised Depressed Uniform L.Shadow R.Shadow

Set edge type of the displayed caption.

E7H51UD.indd 75E7H51UD.indd 75 2007/02/19 18:23:502007/02/19 18:23:50

Page 76

76 EN76 EN

LIST OF SETTINGS

Setup Items (highlight is the default) Contents

General Setting

Display

Pages 81-82

CC Style

Pages 28-30

Font Opacity

Solid

Translucent Flash

Set the font opacity of the displayed caption.

Font Color Transparent

White

Black Red Green Blue Yellow Magenta Cyan

Set the font color of the displayed caption.

Back Opacity

Solid

Translucent Flash

Set back opacity of the displayed caption.

Back Color Transparent

White

Black Red Green Blue Yellow Magenta Cyan

Set back color of the displayed caption.

V-Chip00

Downloadable Rating Change Password

Download rating system via digital broadcasting.

Video

Pages 83-84

Progressive Scan ON

OFF

Set to the progressive scan mode (set to "ON") or to the interlace scan mode(set to "OFF").

TV Aspect

4:3 Letter Box 4:3 Pan & Scan 16:9 Wide

Set a picture size according to aspect ratio of your TV.

Video Input

Page 41

E1(Rear)

Video In S-Video In

Set the video input type for the external input.

E2(Front)

Video In S-Video In

Recording Auto Chapter

Page 32

OFF 5 minutes

10 minutes 15 minutes

30 minutes 60 minutes

Insert chapter marks at even time interval.

Auto Finalize

Page 45

Disc Full ON

OFF

Set the unit to finalize the disc automatically.

End of Timer Rec ON

OFF

Make Recording Compatible

Page 32

OFF

Set to prohibiting additional recording (OFF) or to replace the title list after recording (ON).

Clock

Pages 23-24

Clock Setting Set the clock. Auto Clock Setting OFF

Auto Manual

Set the clock automatically.

Daylight Saving Time

ON(MAR-NOV) ON(APR-OCT)

OFF

Set the clock for the daylight saving time.

Channel

Pages 20-22

Auto Channel Preset

Antenna Cable (Analog) Cable (Analog/Digital)

Tune the channels automatically.

Manual Channel Preset Tune the channels manually. TV Audio Select

Page 27

Stereo SAP

Set the analog TV audio type for output and recording.

Reset All Page 85 Yes

Set to the default setting.

Note

• Your change to each settings stays on even when the power is off.

• An item which is not currently available is grayed in the settings.

E7H51UD.indd 76E7H51UD.indd 76 2007/02/19 18:23:512007/02/19 18:23:51

Page 77

77EN 77EN

Editing

Function Setup

PlaybackRecording

Basic Setup

ConnectionsIntroduction Others Español

SETUPS

Press [STOP C] if you are playing back a disc.

Press [SETUP] and use [K / L] to

select “General Setting”, then press [OK].

“General Setting” menu will appear.

Use [K / L] to select “Playback”, then

press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

Use [K / L] to select a desired item,

then press [OK].

1 2 3 4 5 6 7

Parental Lock Disc Audio Disc Menu Language Audio Language Subtitle Language Angle Icon Still Mode

Submenu will appear.

Refer to 1 to 7 on pages 78-80 and

set the selected item.

When you finish with setting, press

[SETUP] to exit.

Playback

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

CHANNEL

TIMERREC MODE

AUDIOREC

RAPID PLAYCM SKIP

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

OPEN/CLOSE

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE

PQRS

123

456

7809

CLEAR

SETUP

E7H51UD.indd 77E7H51UD.indd 77 2007/02/19 18:23:512007/02/19 18:23:51

Page 78

78 EN78 EN

SETUPS

Parental Lock (Default: OFF)

Some DVD-video feature a parental lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback. This feature prevents your children from viewing inappropriate material.

Use [K / L] to select the desired level, then press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

Parental Lock Audio Out Disc Menu Language Audio Language Subtitle Language Angle Icon Still Mode

Parental Lock

OFF 8 [Adult] 7 [NC 17] 6 [R] 5 [PG R] 4 [PG 13] 3 [PG] 2 [G] 1 [Kid Safe]

If a password has not been set yet, proceed to A. If a password has been set already, proceed to

Note

• Parental lock function may not be available to some discs.

• With some DVD, it may be difficult to find if they are compatible with parental lock. Be sure to check if the parental lock function operates in the way that you have set.

• Record the password in case you forget it.

• If there is a DVD in the unit when you set up the parental lock, press [OPEN/CLOSE A] to activate the parental lock level.

A password has not been set yet.

Use [K / L] to select “Yes”. Use [the Number buttons] to enter a new password except for 4737, then press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

Parental Lock Audio Out Disc Menu Language Audio Language Subtitle Language Angle Icon Still Mode

Parental Lock

OFF 8 [Adult] 7 [NC 17] 6 [R] 5 [PG R] 4 [PG 13] 3 [PG] 2 [G] 1 [Kid Safe]

Change Password?

Yes

General Setting

Playback Display Video Recording Clock Channel Reset All

Parental Lock Audio Out Disc Menu Language Audio Language Subtitle Language Angle Icon Still Mode

Parental Lock

OFF 8 [Adult] 7 [NC 17] 6 [R] 5 [PG R] 4 [PG 13] 3 [PG] 2 [G] 1 [Kid Safe]

Password Input

Yes

Your setting will be activated.

A password has been set already.

• Use [the Number buttons] to enter the current password.

General Setting

Playback Display Video Recording Clock Channel Reset All

Parental Lock Audio Out Disc Menu Language Audio Language Subtitle Language Angle Icon Still Mode

Parental Lock

OFF 8 [Adult] 7 [NC 17] 6 [R] 5 [PG R] 4 [PG 13] 3 [PG] 2 [G] 1 [Kid Safe]

Password Input

Your setting will be activated.

• If you want to change password, use [K / L] to select “Yes”. Use [the Number buttons] to enter a new password, then press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

Parental Lock Audio Out Disc Menu Language Audio Language Subtitle Language Angle Icon Still Mode

Parental Lock

OFF 8 [Adult] 7 [NC 17] 6 [R] 5 [PG R] 4 [PG 13] 3 [PG] 2 [G] 1 [Kid Safe]

Password Input

General Setting

Playback Display Video Recording Clock Channel Reset All

Parental Lock Audio Out Disc Menu Language Audio Language Subtitle Language Angle Icon Still Mode

Parental Lock

OFF 8 [Adult] 7 [NC 17] 6 [R] 5 [PG R] 4 [PG 13] 3 [PG] 2 [G] 1 [Kid Safe]

Change Password?

Yes

Your setting will be activated.

Note

• Press [CLEAR] to erase numbers entered incorrectly.

• When you forget the password or you want to clear all settings in “Parental Lock” menu, enter 4,7,3,7 using [the Number buttons] in password input window. Password will be cleared and parental levels will be set to “OFF”.

Playback (cont’d)

E7H51UD.indd 78E7H51UD.indd 78 2007/02/19 18:23:512007/02/19 18:23:51

Page 79

79EN 79EN

Editing

Function Setup

PlaybackRecording

Basic Setup

ConnectionsIntroduction Others Español

SETUPS

Disc Audio

Choose the appropriate audio setting for your external device.

It will only affect a disc playback.

Use [K / L] to select a desired item, then press

[OK]

General Setting

Playback Display Video Recording Clock Channel Reset All

Parental Lock Audio Out Disc Menu Language Audio Language Subtitle Language Angle Icon Still Mode

Audio Out

Dynamic Range Control PCM Dolby Digital

A B C

Dynamic Range Control (Default : ON)

Set to “ON” to compress the range between soft and loud sounds.

Use [K / L] to select a setting, then press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

Parental Lock Audio Out Disc Menu Language Audio Language Subtitle Language Angle Icon Still Mode

Audio Out

Dynamic Range Control PCM Dolby Digital

Dynamic Range Control

ON OFF

Your setting will be activated.

Note

• Dynamic range control function is available only on the discs which are recorded in the Dolby Digital format.

PCM (Default : 48kHz)

Use [K / L] to select a setting, then press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

Parental Lock Audio Out Disc Menu Language Audio Language Subtitle Language Angle Icon Still Mode

Audio Out

Dynamic Range Control PCM Dolby Digital

PCM

48kHz 96kHz

Your setting will be activated. 48kHz : If your amplifier/decoder is NOT compatible

with 96kHz PCM, select “48kHz”. 96kHz sound will be output in 48kHz.

96kHz : If your amplifier/decoder is compatible with

96kHz PCM, select “96kHz”. 96kHz sound will be output.

Note

When playing back disc with copyright protection

• Even if you select “96kHz”, the sound will be down sampled at 48kHz.

Dolby Digital (Default : Stream)

Use [K / L] to select a setting, then press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

Parental Lock Audio Out Disc Menu Language Audio Language Subtitle Language Angle Icon Still Mode

Audio Out

Dynamic Range Control PCM Dolby Digital

Dolby Digital

PCM Stream

Your setting will be activated. PCM : Converts the Dolby Digital into PCM (2 channel).

When your amplifier/decoder is NOT compatible with Dolby Digital, set to “PCM”.

Stream : Outputs Dolby Digital signals

When your amplifier/decoder is compatible with Dolby Digital, set to “Stream”.

Playback (cont’d)

E7H51UD.indd 79E7H51UD.indd 79 2007/02/19 18:23:512007/02/19 18:23:51

Page 80

80 EN80 EN

SETUPS

Disc Menu Language (Default : English)

Set the language for disc menu.

Use [K / L] to select a setting, then press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

Parental Lock Audio Out Disc Menu Language Audio Language Subtitle Language Angle Icon Still Mode

Disc Menu Language

English French Spanish Other

Your setting will be activated.

Audio Language (Default : Original)

Set the audio language.

Use [K / L] to select a setting, then press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

Parental Lock Audio Out Disc Menu Language Audio Language Subtitle Language Angle Icon Still Mode

Audio Language

Original English French Spanish Other

Your setting will be activated.

• When “Original” is selected, the audio language will be in the disc’s default language.

Subtitle Language (Default : OFF)

Set the subtitle language.

Use [K / L] to select a setting, then press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

Parental Lock Audio Out Disc Menu Language Audio Language Subtitle Language Angle Icon Still Mode

Subtitle Language

OFF English French Spanish Other

Your setting will be activated.

If “Other” is selected for

to 5, press 4-digit code

using [the Number buttons].

Code Input

----

• When you finish entering the code, press [OK]. Refer to the language code table on page 91.

Note

• Only the languages supported by the disc can be selected.

• Audio language setting may not be available to some discs.

• You can change or switch off the subtitles on a DVD also from the disc menu if it is available.

• Press [CLEAR] or [s] to erase numbers entered incorrectly.

Angle Icon (Default : ON)

Set to “ON” to show the angle icon during the playback.

Use [K / L] to select a setting, then press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

Parental Lock Audio Out Disc Menu Language Audio Language Subtitle Language Angle Icon Still Mode

Angle Icon

ON OFF

Your setting will be activated.

Still Mode (Default : Auto)

Select “Auto” usually.

Use [K / L] to select a setting, then press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

Parental Lock Audio Out Disc Menu Language Audio Language Subtitle Language Angle Icon Still Mode

Still Mode

Auto Field Frame

Your setting will be activated. Auto : Optimum resolution setting (“Field” or

“Frame”) will be selected.

Field : Images in the still mode will be stabilized. Frame : Images in the still mode will be highly defined.

Note

•

Frame is 1 completed video image made up of 2 fields (There are 30 frames per second of NTSC video).

Playback (cont’d)

E7H51UD.indd 80E7H51UD.indd 80 2007/02/19 18:23:522007/02/19 18:23:52

Page 81

81EN 81EN

Editing

Function Setup

PlaybackRecording

Basic Setup

ConnectionsIntroduction Others Español

SETUPS

Press [STOP C] if you are playing back a disc.

Press [SETUP] and use [K / L] to

select “General Setting”, then press [OK].

Use [K / L] to select “Display”, then

press [OK].

Use [K / L] to select a desired item,

then press [OK].

OSD Language Screen Saver CC Style V-Chip

1 2 3 4

Selection menu will appear.

Refer to 1 to 4 on page 82 and set

the selected item.

• For 3 refer to pages 28-30.

When you finish with setting, press

[SETUP] to exit.

Display

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

CHANNEL

TIMERREC MODE

AUDIOREC

RAPID PLAYCM SKIP

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE

PQRS

123

456

7809

SETUP

E7H51UD.indd 81E7H51UD.indd 81 2007/02/19 18:23:522007/02/19 18:23:52

Page 82

82 EN82 EN

SETUPS

OSD Language (Default : English)

Set the language for the on-screen display.

Use [K / L] to select a setting, then press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

OSD Language Screen Saver CC Style V-Chip

OSD Language

English Français Español

Your setting will be activated.

Screen Saver (Default : 10 minutes)

Set the time to activate the screen saver function on the TV screen.

Use [K / L] to select a setting, then press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

OSD Language Screen Saver CC Style V-Chip

Screen Saver

OFF

5 minutes 10 minutes 15 minutes 30 minutes

Your setting will be activated.

V-Chip

You can set the viewing limitation for the digital TV programs to prevent your children from watching inappropriate programs.

This feature is available only after the digital TV ratings have been downloaded

• The ratings can be downloaded by the unit

automatically if it is available in your area.

1) Use [the Number buttons] to enter the access password.

If you have not set the password, first, use [the Number buttons] to set the access password, then press [OK].

The number you entered will be stored as the access password.

General Setting

Playback Display Video Recording Clock Channel Reset All

OSD Language Screen Saver CC Style V-Chip

Password Input

2) Use [K / L] to select a desired item, then press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

OSD Language Screen Saver CC Style V-Chip

V-Chip

Downloadable Rating Change Password

A B

Downloadable Rating

Set the rating system via digital broadcasting, or clear the downloaded ratings.

If the broadcasting signal does not have the downloadable rating information, the message below will appear.

Downloadable Rating is currently not available.

• This message will also appear when you try to access

“DOWNLOADABLE RATING“ after you have cleared the downloadable rating information, and the new information has not been downloaded since.

To set the rating:

Use [K / L] to select “BLOCK SETTING” then press [OK] to show the various types of ratings. Use [K / L] to select a desired rating to set, then press [

] to show the levels for the rating. Use [K / L] to select a level, then press [

] to switch “VIEW” or “BLOCK”. If you set one level to

“BLOCK”, all the higher levels will be turned to “BLOCK” automatically.

To clear the downloadable rating information and its setting:

Use [K / L] to select “CLEAR DOWNLOADABLE RATING”, then press [OK].

Change Password

Change the current password.

Use [the Number Buttons] to enter new access password.

Note

• When you forget the access password at step 1),

enter 4,7,3,7 using [the Number buttons] in the password input window. Password will be cleared.

• Depending on the type of rating system, you may set the levels individually.

Display (cont’d)

E7H51UD.indd 82E7H51UD.indd 82 2007/02/19 18:23:522007/02/19 18:23:52

Page 83

83EN 83EN

Editing

Function Setup

PlaybackRecording

Basic Setup

ConnectionsIntroduction Others Español

SETUPS

Press [STOP C] if you are playing back a disc.

Press [SETUP] and use [K / L] to

select “General Setting”, then press [OK].

Use [K / L] to select “Video”, then

press [OK].

Use [K / L] to select a desired item,

then press [OK].

Progressive Scan TV Aspect Video Input

1 2 3

Submenu will appear.

Refer to 1 to 2 on page 84 and set

the selected item.

• For 3 refer to page 41.

When you finish with setting, press

[SETUP] to exit.

Video

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

CHANNEL

TIMERREC MODE

AUDIOREC

RAPID PLAYCM SKIP

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

SETUP

E7H51UD.indd 83E7H51UD.indd 83 2007/02/19 18:23:522007/02/19 18:23:52

Page 84

84 EN84 EN

Progressive Scan (Default : OFF)

This unit is compatible with the progressive scan system. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set progressive scan mode to “ON”.

1) Use [K / L] to select “ON“, then press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

Progressive Scan TV Aspect Video Input

Progressive Scan

ON OFF

2) Use [{ / B] to select “Yes“, then press [OK].

General Setting

Playback Display Video Rcording Clock Channel Reset All

Progressive TV Aspect Select Video

Progressive

ON OFF

Activating progressive scan: Check your TV has progressive scan and connect with component video cable.

NOTE :

Activate? Yes No

If there is no picture or picture is distorted after selecting “Yes”, Wait about 15 seconds for auto recovery.

3) Use [K / L] to select “Yes“ within 15 seconds, then press [OK].

Your setting will be activated.

Note

• If your TV is compatible with progressive scan (525p / 480p), you are recommended to use the component video cable (commercially available) to connect this unit to the TV. (Refer to “Method 3” on page 15.) If not, use the RCA video cable and set the progressive scan to “OFF” or press and hold [SETUP] for more than 3 seconds during DVD playback.

• When selecting “No” or not pressing any buttons on the unit or remote control within 15 seconds at step 3, progressive scan remains to be “OFF” (interlace scan).

TV Aspect (Default: 4:3 Letter Box)

You can select the TV aspect ratio to match the formats of what you are playing back with the unit and your TV screen (4:3 standard or 16:9 widescreen TV).

Use [K / L] to select a setting, then press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

Progressive TV Aspect Select Video

TV Aspect

4:3 Letter Box 4:3 Pan & Scan 16:9 Wide

If you have a standard TV:

Select “4:3 Letter Box”, so that black bars appear on the top and bottom of the TV screen when playing back a wide-screen picture. Select “4:3 Pan & Scan” for a full height picture with both sides trimmed when playing back wide-screen picture.

If you have a widescreen TV:

Select “16:9 Wide”.

Video (cont’d)

SETUPS

E7H51UD.indd 84E7H51UD.indd 84 2007/02/19 18:23:532007/02/19 18:23:53

Page 85

85EN 85EN

Editing

Function Setup

PlaybackRecording

Basic Setup

ConnectionsIntroduction Others Español

Reset the setting to default.

Press [SETUP] and use [K / L] to

select “General Setting”, then press [OK].

“General Setting” menu will appear.

Use [K / L] to select “Reset All”, then

press [OK].

Select “Yes” using [K / L] , then press

[OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

Reset to factory default?

Yes

Select “Yes” again using [K / L] ,

then press [OK].

General Setting

Playback Display Video Recording Clock Channel Reset All

Reset to factory defauit?

Yes

Are you sure?

Yes

Your setting in recording will be initialized.

Reset All

SETUPS

Note

• The settings listed below will remain unchanged even after resetting to the factory default.

– OSD language setting – Channel setting – Clock setting – Parental lock setting – V-Chip setting – Timer programming information

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

CHANNEL

TIMERREC MODE

AUDIOREC

RAPID PLAYCM SKIP

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

SETUP

E7H51UD.indd 85E7H51UD.indd 85 2007/02/19 18:23:532007/02/19 18:23:53

Page 86

86 EN86 EN

TROUBLESHOOTING

Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.

Symptom Remedy

Power

The power does not turn on. • Check that the AC power cord is connected securely.

• Check the breaker (in case of power failure).

Picture

There is no picture. • Re-connect the connecting cords securely.

• Check if the connecting cords are damaged.

• If the main menu appears on the TV screen, press [RETURN] to exit.

• Check the connection to your TV (page 15).

• Check if the progressive scan mode is set correctly according to your TV (page 84).

• Switch the input selector on your TV (such as to “E1”) so that the signal from the unit appears on the TV screen.

Picture noise appears. • Clean the disc with a cleaning cloth.

Playback picture from the external devices connected to this unit is distorted.

• If the picture output signal from the external devices passes through this unit to get to your TV, the copy protection signal applied to some DVD could affect the picture quality. Disconnect the playback device in question and connect it directly to your TV.

TV program reception does not fill the TV screen.

• Try to set the channels with “Auto Channel Preset” or “Manual Channel Preset” in “Channel” menu (pages 20-22).

• Select a channel of any TV program using [CHANNEL

/ ].

TV program pictures are distorted.

• Adjust TV antenna.

• Adjust the picture. (Refer to the TV’s manual.)

• Place the unit and TV farther apart.

• Place the TV and any bunched RF coaxial cables farther apart.

TV channels cannot be changed. • Switch the input to TV.

• Connect the RF coaxial cable correctly (pages 12-14).

Playback picture is distorted. • Keep the device which may cause electrical disturbances, such as a cellular

phone, away.

Sound

There is no sound. • Clean the disc with a cleaning cloth.

• Re-connect all connections securely.

• Check if the connecting cord is damaged.

• Check the connections to the amplifier input.

• Check if the input device setting on the amplifier is correct.

• When the unit is in pause mode or in slow-motion playback mode, sound is not output. This is not a malfunction.

• When the unit is in fast forward or fast reverse mode, sound is not output. This is not a malfunction.

• If you are using COAXIAL DIGITAL AUDIO OUTPUT jack, check the setting in “Disc Audio” (page 79).

Sound is noisy. • Clean the disc with a cleaning cloth.

No DTS sound is output. • This unit is not compatible with DTS sound.

Remote control

The remote control does not function.

• Batteries are weak.

• There are obstacles between the remote control and the unit.

• The remote control is far from the unit.

• There are no batteries in the remote control.

• Check if the unit is turned on.

• Check if you are pointing the remote control at the recorder and NOT the TV. If you have a plasma TV, it may interfere with the IR signal. Try the remote with the plasma off. If the remote works, you may need to move the unit away from the plasma TV.

E7H51UD.indd 86E7H51UD.indd 86 2007/02/19 18:23:532007/02/19 18:23:53

Page 87

87EN 87EN

Function Setup

Others

EditingPlaybackRecording

Basic Setup

ConnectionsIntroduction Español

TROUBLESHOOTING

Symptom Remedy

Playback

The disc does not play back. • No disc is inserted.

• A blank disc is inserted.

• The disc is upside down. Insert the disc with the labeled side facing up.

• The disc is not correctly inserted.

• The unit cannot play back certain discs (such as a CD-ROM) (page 46).

• The region code on the DVD-video does not match the unit (page 46).

• Moisture has condensed inside the unit. Remove the disc and leave the unit turned on for about 2 hours until the moisture evaporates (page 4).

• If the disc was recorded on another recorder, the unit cannot play back the disc if it was not finalized.

Discs recorded on this unit cannot be played back on other DVD players.

• If you are using DVD+R, DVD-RW/-R disc, please ensure you finalized the disc after recording (page 44).

The disc does not start playback from the beginning.

• Resume playback was activated (page 53). Press [STOP C] twice.

• You have inserted a disc whose title menu or DVD menu automatically appears on the TV screen when it is first insert.

The unit starts playing back the disc automatically.

• The DVD-video features an auto playback function.

Some functions such as stop, search, or slow-motion playback cannot be performed.

• Depending on the disc, you may not be able to do some of the operations. Refer to the manual supplied with the disc.

The language for the sound track cannot be changed.

• The title does not have the multilingual audio tracks.

• The DVD-video prohibits the changing of the language for the sound track.

The subtitle language cannot be changed or turned off.

• Multilingual subtitle are not recorded on the DVD-video.

The angles cannot be changed. • Multi-angles are not recorded on the DVD-video being played back.

• The angle-change operation is whenever possible as long as the disc contains a multi-angle portion. Actual change will be performed when the portion has come up.

• The DVD-video prohibits changing angles.

• Try changing the angle using the DVD-video’s menu.

Recording / Timer recording / Editing

The channel cannot be changed from the channel you are recording.

• Set the TV’s input to “TV.”

Nothing was recorded even though you set the timer setting correctly.

• There was a power failure during recording.

• The unit’s internal clock stopped due to a power failure that lasted for more than 30 seconds. Reset the clock (pages 23- 24).

• The program contains copy protection signals that restricts copying.

• The timer setting overlapped with another setting that has priority.

Recording does not stop immediately after you press [STOP C].

• It may take a few seconds for the unit to input disc data before recording stops.

Timer recording is not complete or did not start from the beginning.

• The timer setting overlapped with another setting that has priority (page 38).

• Disc space was not enough.

E7H51UD.indd 87E7H51UD.indd 87 2007/02/19 18:23:532007/02/19 18:23:53

Page 88

88 EN88 EN

TROUBLESHOOTING

Symptom Remedy

Others

The unit does not operate properly.

• When static electricity, etc., causes the unit to operate abnormally, unplug the unit and then plug it in again.

The disc tray does not open when you press [OPEN/CLOSE A].

• It may take a few seconds for the disc tray to open after you have recorded or edited a disc. This is because the unit is adding disc data to the disc.

“Repairing” appears on the TV screen.

Repairing

• If there is a power failure or unplugging during recording, finalizing, formatting or editing (even after “Repairing” disappears), a repairing process will begin automatically just after turning the unit on again.

It may take several minutes up to about several hours.

In a case you intend to cancel the repairing process.

• If you intend to cancel the repairing process, press [OPEN/CLOSE A] on the front panel, then select “Yes” and press [OK]. After that, press

[OPEN/CLOSE A] to take out the disc. The disc canceled during the repairing process MAY NOT work.

Repairing

Do you want to cancel a repairing process ? When selecting “Yes”, the disc may not be usable.

Yes

E7H51UD.indd 88E7H51UD.indd 88 2007/02/19 18:23:532007/02/19 18:23:53

Page 89

89EN 89EN

Function Setup

Others

EditingPlaybackRecording

Basic Setup

ConnectionsIntroduction Español

TROUBLESHOOTING

Error message Cause Solution

Disc Error — Please eject the disc. — Playback feature may not be available on this Disc.

• Unplayable disc is inserted in the unit.

• The disc is upside down.

• Insert the standardized disc which bear the marks on page 46.

• Insert the disc with the labeled side facing up.

Region Error — Please eject the disc. — Playback is not authorized in your region.

• Playback is not authorized in the region of the DVD-video which you inserted in the unit.

• Insert the DVD-video with region codes 1 or ALL.

Parental Lock On The current selected parental level prohibits playback.

• The current selected parental level prohibits playback.

• Check “Parental Lock” setting in “Playback” menu (page 78).

Recording Error This program is not allowed to be recorded.

• The recording function encountered the copy prohibited program.

• You cannot record copy prohibited programs.

Recording Error This program is not recordable in +VR mode.

• You are trying to record the copy-once program.

• You cannot record the copy-once program.

Recording Error Can not record on this disc.

• You are trying to record onto the disc which is unrecordable, or the disc status is unable to record.

• The disc is dirty.

• The disc is damaged.

• Insert the recordable disc, and ensure the disc status satisfies the recording requirements (page 31).

• Clean the disc with a cleaning cloth.

• Replace the disc.

Recording Error This disc is protected and not recordable.

• You are trying to record on to the protected disc which is set in “Disc Edit” menu.

• Release the disc protect setting in “Disc Edit” menu (page 72).

Recording Error Disc is full. (No area for new recording)

• You are trying to record onto the disc which has no space for recording.

• Insert the recordable disc with enough recording space.

Recording Error You cannot record more than 49 titles on one disc. (The maximum is 49)

• You are trying to record onto the disc on which the number of recording titles comes up to the maximum (49).

• Delete unnecessary titles (page 63).

Recording Error You cannot record more than 254 chapters on one disc. (The maximum is 254)

• You are trying to record onto the DVD+RW or DVD-RW on which the number of recording chapters comes up to the maximum (254).

• Delete unnecessary chapter marks (pages 66-67).

Recording Error You cannot record on this disc as Power Calibration Area is full.

• When recordings are performed repeatedly onto an unstable disc, this area may come up to be full.

• Every time you insert a disc for recording, the disc’s working area will be taken up. And if you repeat this frequently, it will be used up sooner and you may not be able to record full 49 titles.

• Insert a new disc.

Recording Error This disc is already finalized.

• You are trying to record onto the disc already finalized.

• Release the finalizing for this disc (page 44).

Recording Error The disc has no recording compatibility. Set “Make Recording Compatible” to “ON” to convert the disc.

• You are trying to record onto the disc that had been recorded by other recorders.

• Set “Make Recording Compatible” to “ON” to rewrite the menu, after that you will record to disc (page 32).

* If you are still having trouble with the unit after checking “TROUBLESHOOTING”, write down the error code and the

error description for calling our help line mentioned on the front page to locate an Authorized Service Center.

E7H51UD.indd 89E7H51UD.indd 89 2007/02/19 18:23:532007/02/19 18:23:53

Page 90

90 EN90 EN

Frequently Asked Questions

TROUBLESHOOTING

– Can I record to CD-RW/-R? No, this unit records only DVD.

– Can I play back DVD-video that is bought in another

country?

Possible when the region code of the disc is 1 and All.

– Can I connect the unit to my PC? No, you cannot control the unit by PC.

– Can I program a timer recording with cable/satellite

box?

Yes, you can. Select “E1” or “E2” as your recording channel, and leave the cable/satellite box on (pages 14, 35-38).

– Can I record one channel while watching another

channel using a cable / satellite box?

It depends on your connection configurations. For more details, please kindly contact your cable / satellite provider.

– Can I connect this unit directly to a TV which only has

an antenna in jack using an RF coaxial cable?

No. You need an RF modulator (commercially available) to connect this unit to a TV which only has an antenna in jack (page 13). This unit does not have an RF modulator.

– Can I change the channels on the cable / satellite box

using the remote control of this unit?

No. Changing the channels on the cable / satellite box using this unit’s remote control is not possible. You need to use the remote control supplied with the cable / satellite box to change the channels on the cable / satellite box.

E7H51UD.indd 90E7H51UD.indd 90 2007/02/19 18:23:532007/02/19 18:23:53

Page 91

91EN 91EN

Function Setup

Others

EditingPlaybackRecording

Basic Setup

ConnectionsIntroduction Español

LANGUAGE CODE

Language Code

Abkhazian 4748 Afar 4747 Afrikaans 4752 Albanian 6563 Amharic 4759 Arabic 4764 Armenian 5471 Assamese 4765 Aymara 4771 Azerbaijani 4772 Bashkir 4847 Basque 5167 Bengali;Bangla 4860 Bhutani 5072 Bihari 4854 Bislama 4855 Breton 4864 Bulgarian 4853 Burmese 5971 Byelorussian 4851 Cambodian 5759 Catalan 4947 Chinese 7254 Corsican 4961 Croatian 5464 Czech 4965 Danish 5047 Dutch 6058 English 5160 Esperanto 5161 Estonian 5166 Faroese 5261 Fiji 5256 Finnish 5255 French 5264 Frisian 5271 Galician 5358 Georgian 5747 German 5051 Greek 5158 Greenlandic 5758 Guarani 5360 Gujarati 5367 Hausa 5447 Hebrew 5569 Hindi 5455

Language Code

Hungarian 5467 Icelandic 5565 Indonesian 5560 Interlingua 5547 Interlingue 5551 Inupiak 5557 Irish 5347 Italian 5566 Japanese 5647 Javanese 5669 Kannada 5760 Kashmiri 5765 Kazakh 5757 Kinyarwanda 6469 Kirghiz 5771 Kirundi 6460 Korean 5761 Kurdish 5767 Laothian 5861 Latin 5847 Latvian; Lettish 5868 Lingala 5860 Lithuanian 5866 Macedonian 5957 Malagasy 5953 Malay 5965 Malayalam 5958 Maltese 5966 Maori 5955 Marathi 5964 Moldavian 5961 Mongolian 5960 Nauru 6047 Nepali 6051 Norwegian 6061 Occitan 6149 Oriya 6164 Oromo (Afan) 6159 Panjabi 6247 Pashto; Pushto 6265 Persian 5247 Polish 6258 Portuguese 6266 Quechua 6367 Rhaeto-Romance 6459 Romanian 6461

Language Code

Russian 6467 Samoan 6559 Sangho 6553 Sanskrit 6547 Scots Gaelic 5350 Serbian 6564 Serbo-Croatian 6554 Sesotho 6566 Setswana 6660 Shona 6560 Sindhi 6550 Singhalese 6555 Siswat 6565 Slovak 6557 Slovenian 6558 Somali 6561 Spanish 5165 Sundanese 6567 Swahili 6569 Swedish 6568 Tagalog 6658 Tajik 6653 Tamil 6647 Tatar 6666 Telugu 6651 Thai 6654 Tibetan 4861 Tigrinya 6655 Tonga 6661 Tsonga 6665 Turkish 6664 Turkmen 6657 Twi 6669 Ukrainian 6757 Urdu 6764 Uzbek 6772 Vietnamese 6855 Volapuk 6861 Welsh 4971 Wolof 6961 Xhosa 7054 Yiddish 5655 Yoruba 7161 Zulu 7267

E7H51UD.indd 91E7H51UD.indd 91 2007/02/19 18:23:532007/02/19 18:23:53

Page 92

92 EN92 EN

Analog Audio

An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also “Digital Audio”.

Aspect Ratio

The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the TV screen is almost square); widescreen models are 16:9 (the TV screen is almost twice as wide as it is high).

Chapter

Just as a book is split up into several chapters, a title on a DVD is usually divided into chapters. See also “Title”.

Component Video Output

Each signal of luminance (Y) and component (PB/CB, PR/ C

R) is independent to output so that you can experience

picture color as it is. Also, due to compatibility with progressive video (525p/480p), you can experience higher-density picture than that in interlace (525i/480i).

Digital Audio

An indirect representation of sound by numbers. During recording, the sound is measured at discrete intervals (44,100 times a second for CD audio) by an analogto-digital converter, generating a stream of numbers. On playback, a digital-to-analog converter generates an analog signal based on these numbers. See also “Sampling Frequency” and “Analog Audio”.

Dolby Digital

The system to compress digital sound developed by Dolby Laboratories. It offers you sound of stereo(2ch) or multi channel audio.

Finalize

To make DVD, which have been recorded on, possible to play back in DVD players. With this unit, it is possible to finalize DVD+R, DVD-RW, and DVD-R.

MP3 (MPEG audio layer 3)

MP3 is a method of compressing files. You can copy MP3 files on CD-RW/-R from the computer and play back the files on this unit.

PBC (playback control) (video CD only)

This function enables you to play back interactive software using a menu screen. See also “Video CD”.

PCM (pulse code modulation)

The most common system of encoding digital audio, found on CD and DAT. Excellent quality, but requires a lot of data compared to formats such as Dolby Digital and MPEG audio. For compatibility with digital audio recorders (CD, MD and DAT) and AV amplifiers with digital inputs, this unit can convert Dolby Digital and MPEG audio to PCM. See also “Digital Audio”.

Progressive Scan (525p/480p)

A type of display that does not split each frame into fields, and instead scans directly through all the scanlines of each frame in order. Progressive scan provides less flickering and higher image resolution than traditional (525i/480i) TV signals. Refer to page 84 for instructions on selective progressive scan mode.

Region Code

Regions associate discs and players with particular areas of the world. This unit will only play back discs that have compatible region codes. You can find the region code of your unit by looking on the rear panel. Some discs are compatible with more than one region (or all regions).

Sampling Frequency

The rate which sound is measured by a specified interval to turn into digital audio data. The numbers of sampling in one second defines as sampling frequency. The higher the rate, the better the sound quality.

SAP (secondary audio program)

Sub-audio channel which is delivered separately from main-audio channel. This audio channel is used as an alternate in bilingual broadcasting.

S-Video Output

It delivers independently each signal of color(C) and luminance(Y) to TV as video signals, so that higher-quality picture will be gained.

Title (DVD only)

A collection of chapters on DVD. See also “Chapter”.

Track

Audio CD use tracks to divide up the content of a disc. The DVD equivalent is called a chapter. See also “Chapter”.

Video CD

A digital format for store video data in compact disc.

GLOSSARY

E7H51UD.indd 92E7H51UD.indd 92 2007/02/19 18:23:542007/02/19 18:23:54

Page 93

93EN 93EN

Function Setup

Others

EditingPlaybackRecording

Basic Setup

ConnectionsIntroduction Español

SPECIFICATIONS

Note

• The specifications and design of this product are subject to change without notice.

General

System DVD+RW/+R, DVD-RW/-R, DVD-video, CD-DA, Video CD, CD-RW/-R Power requirements 120V AC +/-10%, 60Hz +/-5% Power consumption 22W (standby: 2.0W) Dimensions (width x height x depth) 16

x 2 3/8 x 9 3/4 inches (420 x 59 x 247mm) Weight 4.7 lbs. ( 2.1kg ) Operating temperature 41°F (5°C) to 104°F (40°C) Operating humidity Less than 80% (no condensation) TV format ATSC / NTSC-M TV standard

Recording

Recording format +VR (video recording) format

Recording discs

DVD+Rewritable, DVD+Recordable DVD-Rewritable, DVD-Recordable (+VR mode only)

Video recording format

Sampling frequency Compression format

13.5 MHz MPEG

Audio recording format

Sampling frequency Compression format

48 kHz Dolby Digital

Tuner

Tuning system Channel frequency synthesized tuning system

Channel coverage (ATSC / NTSC)

Terrestrial CATV

VHF 2~13, UHF 14~69 2~13, A~W, W+1~W+94 (analog W+1~W+84), A-5~A1, 5A

Terminals

Front

Audio input

RCA jack x 2 2V rms (input impedance: more than 22kΩ)

Video input

RCA jack x 1 1Vp-p (75Ω)

S-video input

Mini DIN 4-pin x 1 Y: 1Vp-p (75Ω) C: 286mVp-p (75Ω)

Rear

VHF/UHF/CATV input and output

F-type 75Ω unbalanced

Audio input

RCA jack x 2 2V rms (input impedance: more than 22kΩ)

Audio output

RCA jack x 2 2V rms (output impedance: more than 1kΩ)

Video input

RCA jack x 1 1Vp-p (75Ω)

Video output

RCA jack x 1 1Vp-p (75Ω)

S-video input

Mini DIN 4-pin x 1 Y: 1Vp-p (75Ω) C: 286mVp-p (75Ω)

S-video output

Mini DIN 4-pin x 1 Y: 1Vp-p (75Ω) C: 286mVp-p (75Ω)

Component video output

RCA jack x 3 Y: 1Vp-p (75Ω) PB/CB: 700mVp-p (75Ω) PR/CR: 700mVp-p (75Ω)

Coaxial digital audio output

RCA jack x 1 500mVp-p (75Ω)

E7H51UD.indd 93E7H51UD.indd 93 2007/02/19 18:23:542007/02/19 18:23:54

Page 94

94 ES

ESPAÑOL

Logotipo

Atributos

Disco de 8 cm / 12 cm, un solo lado, una sola capa Tiempo de grabación máx. aprox. (modo SLP): 360 minutos (4,7 GB) (para 12 cm) 108 minutos (1,4 GB) (para 8 cm)

DVD+RW DVD+R

DVD-RW

DVD-R

LogotiposDiscos reproducibles

Medio Archivos reproducibles

CD-DA

MP3

CD-RW/-R

CD-DA (CD de audio)

CD de video

CD-RW

CD-R

DVD-video

DVD+RW

DVD+R

DVD-RW (Sólo discos en modo de video nalizados)

DVD-R (Sólo discos en modo de video nalizados)

es una marca registrada de DVD Format/Logo Licensing Corporation.

Discos Reproducibles

Este aparato es compatible con la reproducción de los siguientes discos y archivos.

Códigos de Región

Disco Grabable

Este aparato puede grabar a DVD+RW, DVD+R, DVD-RW y DVD-R. Los discos DVD+R/DVD-R pueden ser grabados sólo una vez. Los discos DVD+RW/DVD-RW pueden ser grabados y borrados muchas veces.

En este aparato los discos DVD-RW/-R serán grabados automáticamente en el modo DVD+VR.

• Los siguientes discos se recomiendan para obtener una buena calidad de grabación y han sido comprobados como compatibles con este aparato. Sin embargo, según sea la condición del medio el equipo podría no leer el disco correctamente.

Verbatim DVD+R 8x/16x, DVD+RW 4x, DVD-R 8x, DVD-RW 2x JVC DVD-RW 4x Maxell DVD+R 4x/8x/16x, DVD-R 8x/16x SONY DVD+R 4x/8x/16x, DVD+RW 4x TDK DVD+R 4x/8x/16x

El comportamiento de cualquier otro disco no está

garantizado.

• Usted puede reproducir discos DVD+RW en la mayoría de los reproductores de DVD sin finalizarlos. Sin embargo, si usted ha añadido o eliminado capítulos, u ocultado capítulos, debe ejecutar “Compatibilizar edic.” antes de poder ver dichos efectos en otros equipos. (Consulte la página 74.) Para reproducir discos que no sean DVD+RW en otros reproductores de DVD, usted necesitará finalizarlos.

El número presente en el interior el globo se refiere a una región del mundo.Este aparato puede reproducir discos DVD que estén rotulados para ALL las regiones o para la región 1.

Disco no Grabable

• Un DVD-RW grabado en un modo distinto de +VR no será grabable en este aparato a menos que usted borre todo el contenido del disco. (Consulte la página 73.)

• Un DVD-R grabado en un modo distinto de +VR no será grabable en este aparato.

E7H51UD.indd 94E7H51UD.indd 94 2007/02/19 18:23:542007/02/19 18:23:54

Page 95

Function Setup OthersEditingPlaybackRecording

Basic Setup

ConnectionsIntroduction

Español

95ES

1) Desconecte el cable de alimentación de su televisor del tomacorriente de CA.

2) Efectúe la conexión básica ilustrada más abajo.

Conexión Básica

1) Desconecte el cable de alimentación de su televisor del tomacorriente de CA.

2) Efectúe la conexión como se ilustra abajo.

Conexión a Una Caja de TV por Cable / Satelital

3) Enchufe los cables de alimentación de los aparatos al tomacorriente de CA.

ESPAÑOL

3) Enchufe los cables de alimentación de los aparatos al tomacorriente de CA.

VIDEO

AUDIO IN

(E1)

S-VIDEO

ANTENNA

AUDIO OUT

VIDEO OUT

OUT

AUDIO OUT

VIDEO OUT

ANTENNA

OUT

parte trasera de este aparato

antena de VHF / UHF

cable coaxial de RF

parte trasera de su televisor

cable de

audio RCA

cable de video RCA

empresa de

TV por cable

Esta conexión es sólo para

el procesamiento de cada

elemento de la señal de TV

IDE

AUDIO INLRVIDEO IN

ANT. IN

cable coaxial de RF

caja de TV por cable/satelital

antena parabólica

satelital

ej.)

empresa de

TV por cable

parte trasera de su televisor

parte trasera de este aparato

Esta conexión es sólo para el procesamiento de cada elemento de la señal de TV

cable de audio RCA

cable de video RCA

cable de audio RCA

cable de video RCA

cable coaxial de RF

cable de S-video

ANT. IN

RF OUTANT. IN

AUDIO IN

VIDEO IN

VIDEO

AUDIO IN

(E1)

S-VIDEO

ANTENNA

DIGITAL AUDIO OUTPUT

PCM/BITSTREAM

IN OUT

COAXIAL

VIDEO

OUT

AUDIO OUT

VIDEO

OUT

S-VIDEO

OUT

ANTENNA

OUT

VIDEO

AUDIO IN

(L1)

S-VIDEO

AUDIO OUT

COMPONENT

VIDEO OUT

IN OUT

PB/CB

PR/CR

VIDEO OUT

VIDEO

AUDIO IN

(E1)

S-VIDEO

AUDIO OUT

VIDEO OUT

E7H51UD.indd 95E7H51UD.indd 95 2007/02/19 18:23:542007/02/19 18:23:54

Page 96

96 ES

Cuando usted encienda este aparato por primera vez necesita seguir estos pasos.

Presione [STANDBY-ON yy].

Encienda el televisor. Seleccione la entrada a la cual está conectado el aparato.

Utilice [K / L] para seleccionar su

idioma deseado, y luego presione [OK] para establecerlo.

Initial Setup

OSD Language

English Français Español

Utilice [K / L] para seleccionar el tipo

de señal de emisión, y luego presione [OK].

Ajuste inicial

Ajuste de Canal

Verificar que la antena esté

conectada a la toma "ANTENNA IN".

Antena

Cable (Analógico)

Cable (Analógico/Digital)

El equipo comenzará a obtener los canales disponibles en su región.

Presione [OK] para activar “Ajste

Manual de Reloj”.

Ajuste inicial

Ajste Manual de Reloj

- - - / - - / - - - - ( - - - )

- - : - - - -

Utilice [{ / B] para seleccionar un elemento a configurar, y utilice [

K / L

] para seleccionar el contenido de su preferencia, y luego presione [OK].

Ajuste inicial

Ajste Manual de Reloj

ENE / 01 / 2007 ( LUN )

12 : 00 AM

ESPAÑOL

Configuración Inicial

Presione [OPEN/CLOSE A] para abrir

la bandeja de discos e insertar su disco con el rótulo aupntando hacia arriba.

* Asegúrese de que el disco sea

compatible con este aparato.(Para obtener la lista de discos compatibles consulte la página 31.)

Para seleccionar un modo de

grabación presione [REC MODE].

SP(2Hr) 0:58

Buena

Deciente

18 min 36 min 45 min 54 min 72 min

108 min

60 min 120 min 150 min 180 min 240 min 360 min

Disco de 8 cm Disco de 12 cm

HQ (1Hr)

SP (2Hr)

SPP (2.5Hr)

LP (3Hr) EP (4Hr)

SLP (6Hr)

Calidad del video

y el sonido

Modo de

grabación

Tiempo de

grabación

Presione [DTV/TV] para seleccionar

TV analógica o TV digital, luego y utilice [CHANNEL

/ ] o [los botones numéricos] para seleccionar un canal que se desee grabar.

CH 12

Presione [REC I] para iniciar la

grabación.

Para configurar la grabación a un toque con temporizador (OTR)...

Esta es una manera sencilla de configurar el tiempo de grabación en bloques de 30 minutos. Presione [REC I] repetidamente hasta que aparezca en la pantalla del televisor la longitud deseada de grabación (30 minutos a 6 horas).

Comenzará la grabación a un toque con temporizador.

0:30

(grabación normal)

6:00 5:30

1:00

0:30

• Para cancelar la grabación a un toque con temporizador dentro del tiempo especificado, presione [STOP C].

Para de tener la grabación presione

[STOP C].

Grabación Básica

E7H51UD.indd 96E7H51UD.indd 96 2007/02/19 18:23:542007/02/19 18:23:54

Page 97

Function Setup OthersEditingPlaybackRecording

Basic Setup

ConnectionsIntroduction

Español

97ES

STANDBY-ON

DTV/TV

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE CLEAR

SETUPDISC MENU

RETURNTITLE

CHANNEL

TIMERREC MODE

AUDIOREC

RAPID PLAYCM SKIP

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

STANDBY-ON

TIMER

Abra la bandeja

de discos.

Inserte un disco.

Comience a

reproducir.

Detenga la

reproducción.

Presione [TIMER].

Utilice [K / L] para seleccionar “Prog.

nuevo”, y luego presione [OK].

Programaci. con Reloj

LUN ENE/01 11:00AM

Fcha Empieza Termina

Prog. nuevo

Configure una programación del

temporizador.

Presione [OK].

Presione [STANDBY-ON y] para

configurar una programación del temporizador.

El indicador TIMER REC del panel frontal se iluminará.

Usted puede programar el equipo para que grabe hasta 12 programas, con un mes de anticipación. También hay disponibles grabaciones de programas diarias o semanales.

Antes de grabar, asegúrese de que

• Antes de establecer una programación del temporizador configure el reloj.

• Inserte un disco grabable con suficiente espacio libre.

ESPAÑOL

Reproducción

Grabación con Temporizador

OPEN/CLOSE

Fcha

ENE/02

DTV125. 1

SP 2 : 00

Modo

Empieza

- - : - -

Termina

- - : - -

Fcha

ENE/02

DTV125. 1

SP 2 : 00

Termina

- - : - -

Modo

Empieza

12 : 00AM

Fcha

ENE/02

DTV125. 1

SP 1 : 00

Termina

Modo

Empieza

12 : 00AM 1 : 00AM

Fcha

ENE/02

DTV125. 1

SP 1 : 00

Termina

Modo

Empieza

12 : 00AM 1 : 00AM

Configure la fecha.

Configure las horas de inicio y finalización.

Seleccione un modo deseado de entrada y el canal a grabar.

Seleccione un modo de grabación.

Para obtener más detalles, consulte “How to select a channel number for the timer recording” en la página 37 del manual del usuario.

ej.) modo digital

E7H51UD.indd 97E7H51UD.indd 97 2007/02/19 18:23:552007/02/19 18:23:55

Page 98

98 ES

MEMO

E7H51UD.indd 98E7H51UD.indd 98 2007/02/19 18:23:562007/02/19 18:23:56

Page 99

99ES

MEMO

E7H51UD.indd 99E7H51UD.indd 99 2007/02/19 18:23:562007/02/19 18:23:56

Page 100

LIMITED WARRANTY

FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows:

DURATION:

PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date

of original retail purchase. Certain parts are excluded from this warranty.

LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of

original retail purchase.

LIMITS AND EXCLUSIONS:

THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.

This warranty shall not be extended to any other person or transferee. This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing

or if service was attempted by an unauthorized service center. This limited warranty does not apply to any product not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occur during normal use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or products not supplied by FUNAI CORP., or damage, which results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product, or damage which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES.

ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER. THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER. THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO PROOF

OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIR COSTS WILL BE CHARGED.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE.

WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:

To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI CORP. will not reimburse you for any service done by unauthorized service providers without prior written approval.

To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please contact us at:

FUNAI CORPORATION

Customer Service

Tel: 1-800-605-8610

http://www.funai-corp.com

19900 Van Ness Avenue, Torrance, CA 90501

Printed in China E7H51UD

1VMN23563 ★★★★★

E7H51UD.indd 100E7H51UD.indd 100 2007/02/19 18:23:562007/02/19 18:23:56

Magnavox ZC350MS8 Owner's Manual

Specifications and Main Features

Frequently Asked Questions

User Manual