Before using this product,
please read the instructions
carefully and keep for future reference.
MODEL: W-08CR
W-10CR
W-12CR
For any service needs, call 1-855-368-8606
OWNER'S MANUAL
CONTENTS
1
1. SAFETY PRECAUTIONS ...................................................................2
2. IMPORTANT SAFETY INSTRUCTIONS ............................................4
7. NORMAL OPERATING SOUNDS ....................................................17
Inside you will find many helpful tips on how to use and maintain your air conditioner
properly. Just a little preventive care on your part can save you a great deal of time
and money over the life of your air conditioner. You'll find many answers to common
problems in the Troubleshooting Tips section.
Read This Manual
!
CAUTION
This appliance is not intended for use by children or persons with reduced physical,
sensory or mental capabilities, unless they are supervised by a responsible adult or
considered capable enough to operate the appliance safely.
Children should be supervised to ensure that they do not play with the appliance.
If the supply cord is damaged, it must be replaced by the manufacturer
, its service
agent or similarly qualified persons in order to avoid a hazard.
The appliance should be installed in accordance with national wiring regulations.
Do not operate your air conditioner in a wet room such as a bathroom or laundry room.
The appliance with electric heater should not be operated near any combustible materials.
Contact
the authorised service technician for any repairs, maintenance, or have problems
5........................................................ SERUTAEF RENOITIDNOC RIA
.
4. INSTALLATION INSTRUCTIONS .....................................................10
5. CLEANING AND MAINTENANCE ....................................................14
6. TROUBLESHOOTING TIPS .............................................................15
3
NOTE
:
All the illustrations in this manual are for explanation purposes only.
Your air conditioner may appear to be slightly different.
installing the unit.
To prevent injury to the user or other people and property damage, the following instructions
must be followed. Incorrect operation may cause harm or damage. The seriousness is
classified by the warning symbols below.
Safety Precautions
This symbol indicates the possibility of death or serious injury.
Definition of symbols used in this manual are as shown below.
!
!
WARNING
Always do this.
Never do this.
!
CAUTION
This symbol indicates the possibility of injury or damage to property.
Plug in power plug
properly.
Do not modify power cord
length or share the outlet
with other appliances.
Always ensure effective
grounding.
Unplug the unit if strange
sounds, smell, or smoke
comes from it.
Keep firearms away.
Ventilate room before operating air
conditioner if there is a gas leakage from
another appliance.
Otherwise, this may cause
electric shock or fire due to
excess heat generation.
This may cause electric shock or
fire due to heat generation.
Incorrect grounding may cause
electric shock.
This may cause fire and electric
shock.
This may cause fire.
This may cause explosion, fire and, burns.
This may cause electric shock or
fire
due to heat generation.
This may cause electric shock.
This may cause failure of machine
or electric shock.
This may cause fire and electric
shock.
This may cause fire and electric
shock.
This may cause electric shock or fire.
If the power cord is damaged, it
must be replaced by the manufac turer or an authorised service
centre or a similarly qualified per son in order to avoid a hazard.
This could be harmful to your health.
Incorrect installation may cause
fire and electric shock.
This may cause electric shock.
This may cause an explosion or fire.
This may cause failure and electric shock.
Do not operate or stop the
unit by inserting or pulling
out the power plug.
Do not operate with wet
hands or in damp
environment.
Do not allow water to run
into electric parts.
Do not use the socket if it is
loose or damaged.
Do not use the power cord
close to heating appliances.
Do not damage or use an
unspecified power cord.
Do not point airflow at
room occupants directly.
Always install circuit
breaker and a dedicated
power circuit.
Do not open the unit
during operation.
Do not use the power cord near
flammable
g
as or combustibles, such
as
g
asoline, benzene, thinner, etc.
Do not disassemble or modify unit.
!
!
!
!
!
WARNING
!
2
!
!!
!
CAUTION
When the air filter is
removed do not touch
the exposed metal parts.
y cause an injury.
Do not clean unit when
power is on as it may cause
fire and electric shock,
cause an injury.
Operation with windows
opened may cause water
When the unit is cleaned,
switch off, and turn off
the circuit breaker.
Stop operation and close
the window in storm or
hurricane.
Use caution when unpacking and
installing. Sharp edges could cause injury.
Do not clean the air
conditioner with water.
Water may enter the unit and
degrade the insulation and
This could injure the pet or
plant.
ay cause electric shock
and damage.
Do not put a pet or house
plant where it will be
exposed to direct air flow.
Hold the plug by the head
of the power plug when
taking it out.
Ventilate the room well when
a stove is being used in the
An oxygen shortage may occur.
Do not use this air conditioner to
preserve precision devices, food,
pets, plants, and art objects.
It may cause deterioration of
qua
lity
, etc.
ay cause failure of product
or fire.
Do not use for special
purposes.
Turn off the main power
switch when not using the
unit for a long time.
If water enters the unit, turn the unit off at the power
outlet and switch off the circuit breaker. Isolate
supply by taking the power-plug out and contact a
qualified service technician.
3
!!
!!
!!
!!
!!
!!
!!
appliance or accident.
Appearance may be
deteriorated due to change
of product color or weaken
Do not place obstacles
around air-inlets or inside
of air-outlet.
Do not use strong detergent such as wax or thinner,
only use a soft cloth.
If bracket is damaged, there
is danger of damage due to
falling unit.
electric shock.
Ensure that the installation bracket of
the outdoor appliance is not damaged
due to prolonged exposure.
Do not place heavy object on the
power cord and ensure that the cord
is not compressed.
Operation without filters may
cause failure.
d
Always insert the filters
securely. Clean filter once
every two weeks.
Do not drink water drained
from air conditioner.
!!
!!
This ma
cause electric shock.
or
damage to indoor property
This m
This m
This may cause failure of
the surface of the unit.
This may cause fire or
The water may contain
contaminants and coul
make you sick.
same room.
IMPORTANT SAFETY INSTRUCTIONS
Be sure the s adequate for the model you have
chosen. This information can be found on the serial plate, which
is located on the side of the cabinet and behind the grille.
Be sure the air conditioner is properly grounded. To minimize
shock and fire hazards, proper grounding is important. The power
cord is equipped with a three-prong grounding plug for protection
against shock hazards.
Your air conditioner must be used in a properly grounded wall
receptacle. If the wall receptacle you intend to use is not adequately
grounded or protected by a time delay fuse or circuit breaker,
have a qualified electrician install the proper receptacle.
Ensure the receptacle is accessible after the unit installation.
Do not run air conditioner without side protective cover in place.
This could result in mechanical damage within the air conditioner.
Do not use an extension cord or an adapter plug with unit.
WARNING
For your sa fety
Do not store or use gasoline or other flammable vapors and liquids in
the vicinity of this or any other appliance.
fire hazard or electric shock, do not use an extension cord or an
adaptor plug. Do not remove any prong from the power cord.
WARNING
Electr ical Inform ation
NOTE For some models, the power
cord ir conditioner
contains a current detection device
designed to reduce the risk of fire.
Please refer to the section Operation
of Current Detection Device for details.
In the event that the power cord is
damaged, it cannot be repaired, it
must be replaced with a cord from
the Product Manufacturer.
,
,
Do no t, unde r any
circumsta nces , cut,
remove, o r bypass
the g roundin g p rong.
Power cor d
with 3- pr ong grounding plug
and curre nt detection devi ce
Operation of Current Detection Device
(Applic able o nly to certain units with c urrent detecti on dev ice)
1. Plug in the Air Conditioner.
2. The power supply cord will have TWO buttons on the plug head. Press the TEST button, you will notice a
click as the RESET button pops out.
3. Press the RESET button, again you will notice a click as the button engages.
4. The power supply cord is now supplying electricity to the unit. (On some products this it also indicated by
a ligh
t on the plug head.)
NOTES:
Do n
ot use this device to turn the unit on or off.
A
lways make sure the RESET BUTTON IS PUSHED IN for correct operation.
If pow
er cord is damaged, it cannot be repaired. It MUST be replaced by one obtained from the
product manufacturer.
4
Note : Perf ormance may be reduced outsi de of t hese opera ting temprerature ranges.
NOTE:This air conditioner is designed to be operated under the following conditions:
Cooling operation
Outdoor temp:
O O O O
18-43 C/64-109 F (18-52 C/64-125 F for special tropical models)
Indoor temp:
O
O
17-32 C/62-90 F
Heating operation
Outdoor temp:
O
O
-5-24 C/23-76 F
Indoor temp:
O
O
0-27 C/32-80 F
for this a
To avoid
power requirement i
The power cord contains a current detection function that senses damage to the power cord. To test your power
cord, do the following:
The power cord must be replaced if it fails reset when either the TEST button is pushed, or it cannot
AIR CONDITIONER FEATURES
Before you begin, familiarize yourself with the control panel on the unit and the remote
control as shown below and refer to the symbols for the functions you desire. The unit
can be controlled by either the unit controls or with the remote control.
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
ADJUSTS
TEMPERATURE
OR TIME
ADJUSTS
TEMPERATURE
OR TIME
DISPLAYS
TEMPERATURE
OR TIME OR ERROR CODES
ACTIVATES
TIMER
CHECK FILTER
RESET BUTTON
SETS MODE
ENERGY
SAVER MODE
SLEEP MODE
CLEAN AIR MODE
(only on some models)
SET FAN SPEED
TURNS UNIT
ON OR OFF
UNIT CONTROL
Temp Temp
Timer
Timer
On
Off
Sleep
Check
Filter
Timer
Auto
Cool
Dry
Fan
Low
Auto
Med
High
Clean
Air
Fan
Mode
Follow
Me
Energy
Saver
On/Off
5
FOLLOW ME INDICATOR
(only on some models)
TO TURN UNIT ON:
NOTE: The following instructions represent the control panel on the unit,
Press the ON/OFF button.
Auto
Cool
Dry
Fan
Low
Auto
Med
High
Clean
Air
Fan
Mode
Follow
Me
Energy
Saver
On/Off
DO THIS:
the same instructions can be used for the remote control.
NOTE: (ON/OFF button)
The unit will initiate automatically the Energy
Saver function under COOL, DRY, AUTO (only
Auto-Cooling and Auto-Fan) modes.