Magnavox VRZ255AT01 Owner’s Manual

Owner's Manual
Importantl
Return your Warranty Registration
Card within IO days. See why In_
Onceyour PHILIPSMAGNAVOXpurchaseis reds.re.red, youreeligib!eto receive;all the prmleges
. # . ° o +_ ,
Cardenclosedwithyourpurchaseat c advantageoftheseimportantbehests.
Know these
IPHILIPS
Congratulations on your purchase, and
welcome to the "family!"
Dear PHILIPS MAGNAVOX product owner: Thank you for your confidencein PHIUPS HAGNAVOX.You've
selected one of the best-built,best-backedproductsavailable today.And we'll do everythingin our power to keep you happy
with your purchasefor manyyears to come. As a member of the PHIUPS HAGNAVOX"family," you're entitled
to protection by one of the most comprehensivewarranties and outstandingservice networks in the industry. What's more, your purchaseguaranteesyou'll receive all the infor-
mation and speciatoffers for which you qualify,pluseasyaccessto
_accessories from,our convenient home shoppingnetwork.
,'And most importantly you cancount.on our uncompromising i'c_mmitment to your total,satisfaction.
_AII 0f this_ls our way of sayingwelcome-and thanks for investingin
a PHILIPS HAGNAVOX product.
Sincerely,
Robert Hinkhorst
Presidetlt and Chief ExecutiveOfficer
RS. ]Remember, to get the most from your PHILIPS
PIAGNAVOX product, you must return your
Warranty Registration Cardwithin 10 days.So
please mall it to us Hght ni)wl .
safetys mbols
_k This"bolt of Eghtning"indicates
uninsulated material within
your unit maycauseanelectricalshock.
For the safety of everyone in your household,pleasedo not remove prod-
uct coverin_
_kThe "exdamadon point" calls
attention to featuresfor which
you shouldread the enclosedliterature closelyto preventoperatingand main-
mnanceproblemL
WARNING: TO PREVENT RRE OR
SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR
+_ HOISTURE+
CAUTION:To preventelectricshock. matchwide blade of pfegcow_deslot.
andfully insert. ATTENTION: Pour 6viter fes chocs
6fec_ques, inttoduire la lame El plus large de la fiche dartsla home corm-
spondante de la prise et pousser jusqu'aufond.
For Customer Use
Enter belowthe SerialNo. whichis locatedon the rear
of the cabinet.Retainthis informationfor futurerefer-
ence.
Model No. SerialNo.
Introduction3
Welcome to yourVCR owner's manual. This manualhassix sections:SettingUpYourVCR; Descriptionof Controls;BasicOperations;Recording;
Playing;andInformationYou May Need.The instructionsexplainallof the VCR'sfeatures,which arelisted below.
Features
Automatic Channel Setup Automatic Clock Setting
Automatic Head Cleaner Daylight- SavingTime
Hi-Fi Stereo Tape Playback Index Search
Multi-Channel Television Sound (MTS) System
19 Micron Head
On-Screen Menus in English, Spanish,or French Quick Programming
•"Remote Control with Capability to Operate'IV, Cable Box, and Direct
Broadcast System (DBS)
Repeat Play
Skip Search
VCR Plus+ Programming System
Safety Precautions
Warning:To prevent fire or shock hazard, do not expose this equip- ment to rain or moisture.
FCC Warning:Any unauthorized changes or modifications to this equipment void the user's authority to operate it,
ThisVCR, equippedwith a High Quality (HQ) System,iscompatiblewith existing
Video Home System(VHS) equipment.ThisVCRalso isequippedwith S-VHS Quasi Playback(SQPB),allowingyouto playS-VHS recordings with regularVHS
resolution.However,you maynot record on S-VHS tapeswith thisVCR. Thisproduct hasa 19 micron headwhichprovidesa better picturewhen you
viewtapes recorded in slowspeed(SLP). Philips ConsumerElectronicsCompanyrecommends that youuseonlyvideo cassettetapes that havebeen tested and inspectedfor useintwo, four, six,and
eighthourVCRs, andwhich are labelledwith the _ mark.The use oftapes
that havenot beeninspectedfor usein two, four,six,and eighthourVCRs may
result in poor picture qualityand excessivedepositson the video heads,which
may not be coveredbythe warrantyif damageoccurs.
Note to the CableTV System Installer:This reminder is provided to call the Cable TV system installers attention to Article 820-40 of the National Electrical
Code, which provides guidelines for proper grounding - in particular, specifying that the cable ground shallbe connected to the grounding system of the build-
ing, as close to the point of cable entry as possible. Operation is subject to the following two conditions: (I) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Copyright 1998 Philips Consumer ElectronicsCompany.All
rights reserved.
VCR Plus+ and PlusCode are trademarks of Gemstar
Development Corporation.TheVCR Plus+ systemis manufac- tured underlicensefrom Gemstar Development Corporation.
The ENERGYSTAR"name andlogo are registered marks of the U.S.EnvironmentalProtection Agency.AsanENERGY STAR"
Partner, Philips Consumer ElectronicsCompanyhasdetermined that this product or product model meets the ENERGY STAR
guidelinesfor energyefficiency.
4 TableofContents
Setting UpYourVCR
Introduction ........... . .............. . ............................... 3
Table of Contents ........ _............................................. 4
Before UsingYour VCR .................................................. 5
Hookups Without a Cable Box ......................................... 6 - 7
HookupsWith a Cable Box/Direct Broadcast System ........................ 8 - 9
Turning on Your VCR .................................................. I0
Automatic Channel Seeup ........................................... 11 - 12
Setting the Clock ................................................. 13 - 17
Daylight-Saving Time ................................................... 18
LanguageSelection .................................................... 19
Description of Controls
Remote Control Buttons ........................................... 20 - 2 I
Display Panel ........................................................ 22
Front Panel .......................................................... 23
Rear Panel .......................................................... 24
On-Screen Status Displays .............................................. 25
Setting the Remote Control to Operate a'lV ............................... 26
Setting the Remote Control to Operate a Cable BoxiDBS ..................... 27
Basic Operations
Playing ............................................................. 28
Recording ........................................................... 29
/-
Recording
One-Touch Recording ................................................. 30
Recording One Channel/VVatchingAnother ................................ 3 I
Setting Up theVCR Plus+ Programming System .......................... 32 - 33
Timer RecordingWith theVCR Plus+ Programming System ................. 34 - 35
Quick Programming ............................................... 36 - 39
Timer Recording Speed Setting .......................................... 40
Rerecording (Tape Duplication) ........................................... 41
Playing
Index Search ......................................................... 42
Multi-Channel Television Sound System ................. _............... 43 - 44
Hi-Fi Stereo Tape Playback .............................................. 45
Video Stabilizer ...................................................... 46
Incredible Picture .................................................... 47
Playback Options ..................................................... 48
Automatic Operation Features ........................................... 49
InformationYou May Need
Glossary ............................................................. S0
Specifications ........................................................ 5 I
Helpful Hints ......................... _. ........................... 52 - 53
Limited Warranty .................................................... 54
Index ............................... . ................ .............. 55
Supplied Accessories .................................................. 56
Removing the Plastic Cover from the Front Panel
A thin, plasticcover mayprotect the front panelof yourVCR.
BeforeusingtheVCP_lift a corner ofthe plastic,then peel it off.
Putting Batteries in the Remote Control
I I
To open the battery compartment, push in the tab, then pull up the lid.
2
Place two AA batteries inside the battery compartment with their + and - ends aligned as indicated.
3
Close the battery compartment lid.
Using the Remote Control
Do not put objectsbetweenthe remote controlandtheVCR.
PresstheVCR button, then point the remote controlat theVCR's remote sensor,before pressingotherVCR operationbuttons.
PresstheTV button,then pointthe remote control at theTV,
before pressingotherTV operation buttons.
Pressthe CBIdDI3Sbutton,then point the remote control at the Cable Box/DBS,before pressingother CableBox/DBS operation
buttons.
BeforeUsingYourVCR5
2
Erase Protection
Video cassetteshaverecord tabsto ensurethat recordings are not erasedaccidentany.
I
To prevent accidental erasure, break off the tab with a screwdriver.
2
To record again, cover the hole with cellophane tape.
VCR Maintenance
Remove anylightadhesivestick-onnotes from the videocassette beforeputtingthe cassettein theVCR. Removablelabels canjam
the VCR.
Periodic maintenance is required to maintain your VCR'sperfor-
mance.¥ourVCR has an automaticheadcleaner,but the video headseventually will require cleaningor replacement.Cleaning or
replacement of the video heads should be performed only by an
authorized service center.
Helpful Hints
Theremote controland itsbatteries
are supplied. Do notmix alkalineand manganese
batteries.
Donotmix old and newbatteries.
6 HookupsWithoutaCableBox
The basicVCWTV connection- antenna/cabletoVCR toTV - isshownbelow.If you havea Cable Box or a
Direct Broadcast System, please refer to pages 8 - 9.After you hook up theVCR, please go to page l0 to turn on theVCR.
I
Disconnect the antenna or cable from yourTV.
Antenna
IndoorlOutdoor
(300 ohm)
Jack
Cable
(75 ohm)
(on back of'IV)
2
Connect the antenna or cable to the ANT(enna) IN Jack on the back of the
VCR.
Antenna
Indoor/Outdoor
(300 ohm)
Cable
(7Sohm)
HookupsWithoutaCableBox(cont'd)7
_ , ;
Connect the RF coaxial cable (supplied) to the. RF OUT Jack on the back of theVCR and to the ANTENNA IN Jack on the TV. (You may use either a snap-on type or screw-on type of coaxial cable,whichever you prefer. A snap-on type is supplied.)
Antenna or Cable
Antenna In Jack
RF coaxial cable
(on back of TV)
example only
4
Plug in theTV and theVCR.
5
Set the CH3/CH4 switch on the back of the VCR to CH3 or CH4, whichever
channel is not used or least used in your area.To operate yourVCR with your TV, set
the TV to the same channel. For example, when playing a tape, if the CH3/CH4
switch is set to CH3, the TV should be on channel 3.
CH3 / CH4
Switch
CH3 CH4
6
You are ready to turn on theVCR. Please go to page 10 before turning on the VCR.
8 HookupsWitha CableB0x/DimctBroadcastSystem
Q •!
There are two ways to connect your Cable Box/DBS to theVCR.With this connection:
Youmayview anychannel.
You must select channelsatthe Cable Box/DBS.Channelscannot bechangedat theVCR.
You may not view a channelother than the one you are recording.
You maynot setupchannelsat theVCR.
You canonlyprograma timer recording for one channelat a time. SettheTV andtheVCR to the Cable
Box/DBSoutput channel(channel 03 or 04), andset your Cable Box/DBSto the channelyou want to record.When you enter the channelyou want to record in a timer recording, selectchannel03 or 04 (the Cable Box/DBSoutput channel).(Thisisstep 3 on page36.) Leavethe CableBox/DBSon for atimer
recording.
Cable Box/DBS
Cable signal
RFcoaxialcable
Connections
VCR
RFcoaxialcable
I
Connect a Cable signalto the IN jack on the Cable 13ox/DBS.
2
Usean EF coaxialcable (supplied)to connectthe OUT jack on
the Cable Box/DBSto the ANT(enna) IN jack on theVCR.
3
Use a secondRFcoaxialcableto connectthe RFOUT jack on the
VCR to theTV'sANTENNA IN jack.
TV_s
ANTENNA
IN jack
Recording/Viewing Any Channel
I
With theVCR on and inVCR position (theVCR light will appear
on the display panel), use the CH(annei) A/Y buttons to set the VCR to the Cable Box/DBS output channel (channel 03 or 04).
2
Set the TV to the samechannelto whichyou set theVCR.
3
Select the channelyou want to view/recordat the Cable Box/DBS.
HookupsWithaCableBox/DirectBroadcastSystem(cant'd)9
With this connection:
You maywa:_chone channelwhile recording another.
You may not record scrambledchannels.
I VCR
CableBoxJDBS
Cable signal _ -I'V's
RFcoaxialcable iN jack
RF coaxialcable
Connections
ANTENNA
I
Connect a Cable signal to theVCR's ANT(enna) IN iack.
2
Use anRF coaxialcable(supplied)to connectthe RF OUT jackon theVCR to the IN jackon the Cable Box/DES.
3
Use a secondRF coaxial cableto connect the OUT jackon the Cable Box/DBS to the TV's ANTENNA IN jack.
Recording One Channel/_Natching Another
I ....
Putthe Cable Box/DBS on the samechannelastheVCR's
CH31CH4 switch.Then,with the VCR inVCR position(theVCR
light will appearon the displaypanel),usethe CH(annel) A/Y but- tons to select the channelyou want to record at theVCR. Start the recording.
2
PresstheVCRFIW button once to put theVCR inTV position. (TheVCR lightwill disappear.)
3
Set theTV to the Cable BOx/DBSoutput channel(03 or 04).
4
Selectthe channelyou want to watch atthe CableBOx/DBS.
Whenyouplay a tape,makesure the CableBoxIDBSissetto the
samechanne/asthe CH3/CH4 switchontheVCR.SettheW to the
CableBox/DBSoutputchannel(0-!
or 04).
IOTurningonYourVCR
Before turning on yourVCR, make sure there are batteries in the remote control and the VCR,TV, and Cable Box/DBS (if applicable)
are connected.
Turn on theTV.
I
Press theVCR button, then press the POWER button.
2
Turn on theTV. Set it to channel 3 or 4, whichever the
CH31CH4 switch on the back of theVCR is set to, The menushownbelow will appear.
'_ ENGLISH
ESPA_Ot.
F'P,ANrCAIS
SIEIECT MAKE SELECTION OR
$H I_/OK TO CONTINUE
"/
J
3
Press the PLAY or STOP button to select the on- screen display language.
4
Press the FF I_/OK button. The menu shownbelow will
appear.
channels.
Wait for theVCR to set up
3
I
CONNECT ANTENNA OR CABLE
TOVCR
THEN PUD4 I_IOK KEY
I "/
OR... -
R PI_Y ONLY - PtlN-I _rOP J
5
Press the FF ,IOK button to begin automatic channel setup. AUTO CH.SET PROCEEDING PLEASEWAIT will appear
on-screen.The VCR will memorize all of the channels you receive, so when you scan through channels using the CH(annel) •/V but-
tons, you'll only scanthrough channels that you receive.
6
When channels areset up,AUTO CH. SETCOMPLETED will
appear on-screen briefly.
Automayappear onthedisplay panel untilthe clockisset. After
youconnectthe antenna/cablesig- nal to theVCRandconnecttheVCR
toa power source,the clock may set itselfautomatically.Thecurrent
time mayappearon theVCRdis.
playpanel.
If youdo notwant to setup chan-
nelsnow,pressthe STOP button at step5. TUNERNOTSETwill
appear on-screenbriefly. Youmaynotset upchannelsat
step5 if you are usinga Cable Box/DBS.
AutomaticChannelSetupII
Although yourVCR mayautomaticallymemorizethe channelsyou
receive when you turn it on for the first time, this functionlets
you set up channelsagain. Make each entry within one minute of the previousentry.
!
channels.
Wait for theVCR to set up
Press theVCR button, then press the MENU button.
2
Press the PLAY or STOP button to selectTUNER SET UP,then press the FF I_/OK button.
-I. CABLE/ANTENNA. CABLE
AUTO CH, PROGRAMMING ADD/nELETE CH.
END PUSH EXIT
3
Press the FF I_IOK button repeatedly so that ANT (if you have an antenna) or CABLE (if you have a cable connec- tion) appears beside CABLE/ANTENNA.
I
4
Press the STOP button to select AUTO CH. PRO- GRAMMING_ then press the FF Ib/OK button. AUTO CH.
SETPROCEEDING PI.EASEWAlT anda scalethat showsthe progressof channelsetup will appearon-screan.TheVCRwill
memorizeall the channelsyou receive.
5
Wait for a few minutes while theVCR sets up channels. When programmingiscomplete,AUTO CH. SET COMPLETED
will appearon-screen.Then,the programmingof the lowestchan-
nel numberplacedin theVCR's memory will appearon-screen. Now when you pressthe CH(annel) •/• buttons,youwill scan
onlythrough channelsyou receive.
If the channelyouselecthasno bmadca_thescreenwillbe solid
blue. Thetwo/ine Inputmodeswill
alwaysbestored intheVCR'smem- ory at channel00.1"oselectA/V IN FRONTorAIV IN REAR,press0,0,
thenpressthe CH(annel)•IY but- tonsso thatAIV IN FRONTor AIV
IN REARappearson-screenbriefly.
Toexit LineInputmode,usethe CH(annel)•/• buttonstoselecta
channelotherthan 00.
12AutomaticChannelSetupIcont'd)
Adding/Deleting Channels
I
Press theVCR button, then press the MENU button.
VCR SET UP
TUNER SET UP
IN_L _l" UP
2
Press the PLAY or STOP button to selectTUNER
SET UP, then press the FF I_IOK button.
AUTO CH. P'ROGRJLMMING
1
I
6
3
3
Press the PLAY or STOP button to select
ADDIDELETE CH., then press the FF I_/OK button.
SELECT
_25 eEl&frED
01 .... DELETED
02 ADDED 03 A_ED
"TOADD/DELETE PUSH _IOK
N_ID PUN-I EXff J
4 "
Use the Number buttons, the CH (annel) •/V buttons, or
the PLAY or STOP buttons to select the channel you want to add or delete.An arrow will appear beside the
selected channel.
5
Press the FF I_IOK button so that DELETED orADDED appears beside the channel numhen
6
Press the EXITISTATUS button. Programmingof the channel
you addedor deletedwill appearon-screen.
Se ngtheClock13
* 6 * 6 e•
There are four waysto set theVCR's dock_Hanuatly,withTime Zone Selection,with Hanual PBSChannelSelection,or with
Automatic PBSChannelSelection.CableBox/DBS usersmustset the clockmanually.Before you set the clock,makesure:
TheVCR power is on.
TheVCR lightappearson the displaypanel,if it does not,press
the VCPd'I"V button once.
Channels are set up.
Youmake eachentry within one minute of the previous entry,
To set the clock manually,follow the stepson this page:Touse Time 7one SelecUon_goto page 15.TouseManualPBSChannel
selection,go to page16.To use Automatic PBS Channel Selection,
go to page 17.
I
Manual Clock Setting
I
Press theVCR button, then press the MENU button.
-_ VCR SET UP
TUNER SET UP
INITIAL SET UP
END F_JSH EXiT j,
2
Press the PLAY or STOP button to select INITIAL SET UP, then press the FF I_IOK button.
VCI_ PLUS+ C_
_T 0 " _
ENO PUSI'I EXIT _/
3
Press the PLAY or STOP button to select CLOCK,
then press the FF I_IOK button.
DATE 01_)1/9_
AUTO CLOCK ON
PBSCH, AUTO _S.1_ AUTO
TIME ..... AM l
Tli'*1E ZONE AU'FO
TO SET PUSH k_ f THEN I_/OK
_.O END PUSH EXIT
Instructions continue on page 14.
J
He/p_ Hints
Toprogram theVCRso itsclackwill
automatk:al/ymoveforwardone hourinAprilandrumbackone
hourin October,seepage18.
Tomakecorrectious,fo//owstepsI
3,then pressthe FFI,'IOK button
unti/theitemyouwantto correct
flashing.Thenpressthe PLAY or
STOP buttonto enterthe correct
informatJon.PresstheEXIT/STATUS
huron.
14SettingtheClock(cont'd)
Press the PLAY & or STOP button repeatedly to set theTIME. Everytime you pressthe PLAY or STOP button, the time changesin one minute increments,if you pressandhold the PLAY or STOP button,the time changesin 30 minute
increments.
When the time is correct, press the FF )'/OK button.
DATE 01/01/96
AUTOCLOCK OFF
D_T. ON
TtHE l0:4SAM
TO SETPUSHAV THEN IPiOK
ENDPUSHEXIT
5
Press the PLAY or STOP button repeatedly to set the DATE (month and day). Everytime you pressthe PLAY or STOP button,the daychangesin one dayincrements.If you
pressandhold the PLAY or STOP button,the day changesin
15 dayincrements.
When the month and day are correct, press the FF I_/OK button.
DATE 07131,'98
AUTO CI.OCK OFF
D.$.T, ON
'TO SET PIJSH kV THEN Ib.IOK
_hlD PUSH EXIT
6
Press the PLAY or STOP button repeatedly to set theYEAR.When the year is correct, press the FF I_IOK
button. The dayof the week will appearautomatically.
OAT_E 07/31/V8
_ _I.OCK OFF
D.S,_ ON
TO S_TPUSH&T THEN _IOK
E/,IDpJSl_ _¢.rr
7
Press the FF I_IOK button once again to skip the "AUTO
CLOCK" selection and go to "D.S.T:' (Daylight Saving
Time) selection. Press the PLAY or STOP button to set D,S.T. to ON, OFF or AUTO. IfAUTO CLOCK is setto
OFF,youmayonly set D.S.T.to ON or OFF.For more information, pleasesee page18.
8
Press the EXITISTATUS button.
SettingtheClock(c0nt'd)15
Time Zone Selection
I
Press theVCR button, then press the MENU button.
2
Press the PLAY or STOP button to select INITIAL SET UP, then press the FF I_/OK button.
SELECT CHOOSE IbiOK
tANGUAGE ENGUSH VCR PLUS÷ CH.
" CL°CK
END PUSH EXIT
3
Press the PLAY or STOP button to select CLOCK,
then press the FF I_IOK button. (IfAUTO CLOCK isset to OFF,TIME ZONE will not beavailable
in the menu.If this happens,pressthe FFI_/OK button to select AUTO CLOCK, then pressthe PLAY or STOP button to set
AUTO CLOCK to ON.)
I
5
TIME --:--AM
I_ATE 01iOt/911
AUTO CLOCK ON PBSCH, AUTO
O.S,_ AUTO
TIME ZONE AUTO
f "l
TO SET PUSH AV THEN I_/OK
END _ EXiT J
4
Press the FF I_IOK bu_0n repeatedly to selectTIME
ZONE.
5
Press the PLAY or STOP button repeatedly to select
yourTime Zone, then press the FF I_IOK button.
6
Press the EXIT/STATUS button.
7
An on-screen message will ask you to turn off theVCR, and - - :- -AM will appear on the display panel. Press the
POWER button to turn off theVCR.
Auto will flashin the displaypaneluntilthe clockisse_ Leavethe VCR turned off untilthe time appearson the displaypanel.
If- - : -_r appearson the displaypanelafter you turn offtheVCR,
theVCR couldnot find the time. Setthe clockfollowingthe steps
on pages13- 14.
Whenthe powerplug isconnected
to anACoutlet,thecorrecttimewill appear onthe displaypanelofthe
VCR(whenthe powerisoff).
Ifyou livenearthe boundaryof an
adjacenttime zone,yourPESchan- nelmay camefrom a different time
zone.Selectthetime zone0fyour PBSchannelat step5.
Pressthe EXIT/STATUSbutton
repeated/ytomakethe time appear
onthe displaypanelwhen theVCR
poweris on.
16SettingtheClock(cont'd)
Manual PBS Channel Selection
I
Press theVCR button, then press the MENU button.
2
Press the PLAY or STOP button to select INITIAL SET UP, then press the FF I_/OK button.
3
Press the PLAY or STOP button to select CLOCK,
then press the FF I_IOK button. (IfAUTO CLOCK issetto OFF,PBSCH. will not be availablein the menu.If this happens,
pressthe FFI_/OK bu_conto selectAUTO CLOCI_ then press
the PLAY or STOP buttonto setAUTO CLOCK to ON.)
DATE 01_)[/_1
_UTO CLOCKON
PI_ CH, AUTO O.S._ AUTO
TIME --:--AM
TIME ZONE AUTO
TO SET FUeJ4 At THEN I_IOK
REND PUe'_HEXIT
4
4
Press the FF I_/OK button to select PBS CH.
5
Press the PLAY or STOP button repeatedly to select the station number of your PBS channel, then press the
FF I_/OK button.
4.
Press the EXIT/STATUS button.
7
An on-screen message will ask you to turn off theVCR, and - - :- -AM will appear on the display panel.
Press the POWER button to turn off theVCR. Auto will flashinthe displaypaneluntilthe clockis set.Leavethe
VCP,power off until the clockisset If - - :- - appearson the displaypanelafteryou turn off theVCR,
theVCR couldnot findthe time. Repeatsteps I - 6 above,enter-
inga differentPBSchannelat step 5.Or, set the clockfollowing the stepson page 17.
I
I
Thetimewillbe updatedat thetoo ofeachhour(exceptat II p.m., I
midnight,I a.m.,and2 a.m.). I
Automatic PBS Channel Selection
SettingtheClock(coned)17
I
Press theVCR button, then press the MENU button.
2
Press the PLAY or STOP button to select INITIAL SET UP, then press the FF I_IOK button.
3
Press the PLAY or STOP button to select CLOCK, _" then press the FF I_IOK button. (IfAUTO CLOCK issetto
OFF,PI_SCH. will not be availablein the menu.If this happens, pressthe FFI_/OK button to selectAUTO CLOCK, then press
the PLAY or STOP button to setAUTO CLOCK to ON.)
AUTOCLOCKON
CH. AUTO
I DATE 01,01/98
"r]H E ZONE AUTO
_" TIME ..... AM 1
TO S_" PUSH & Y "II-IEN b-IOK
_TOEND PUSH IE_T
4
Press the FF klOK button repeatedly to select PBS CH.
I
5
Press the PLAY or STOP button repeatedly sothat AUTO flashes beside PBS CH.Then press the FF I_IOK
button.
.
Press the EXITISTATUS button.
7
An on-screen message will ask you to turn off theVCR, and - - :- -AM will appear on the display panel.
Press the POWER button to turn off theVCR. Auto will flashin the displaypaneluntilthe clockis set Leavethe
VCR power off untilthe clockisset.If - - :- - appearson the displaypanelafter you turn off theVCR, theVCR couldnot find
the time.You may need to tell theVCR the PBSchannelfrom whichto take the time. Follow the steps on page 16.
Thetimewillbeupdatedat the top ofeachhour(exceptat I I p.m.,
midnight,I a.m.,and2 a.m.).
Todisplayd_etime0n-screen,_ress
e EXIT/STATUSbutton.(ON
SCREENMODE cannatbe setto OFF..)Detailsare onpage25.
Loading...
+ 39 hidden pages