Magnavox VRU442AT User Manual
Specifications and Main Features
- HQ System
- Frequency Synthesizer with Automatic Set Function
- English and Spanish On-Screen Language Displays and Indicators Panels
- Auto Clock Set
- Auto Tracking Function
- Instant Recording
- Timer Recording
- VCR Plus+ programming
- Special Effects Playback Features
- Remote Control Function for TV and Cable Boxes
- Repeat Playback Options
- Automated Operational Features
- Real Time Counting Device
- Daylight-Saving Feature
- Four Video Head Units
- Compliance NTSC Color System Video Signal Standard EIA
- VHF/UHF: External 75 Ohm Antenna Terminal
- Low Noise Output Integrated Circuits VC Channel 3 Or 4 Unbalanced 75 Ohm Switch
- AC 120 V Power Supply Frequency 60 Hz
- 19 Watts Power Supply Rating
- Between 5 And 40 Degrees Celsius
- Between 10% And 80% Relative Humidity
- Weight 3 3 Kg 7 3 Lbs
- 14 3 16 W 3 4 H 10 11 16 D Dimensions 360 mm x 94 mm x 271 mm
- VHF 2 13 UHF 14-69 Broadcast Channel
- A 1 J W 1 2 C hyper band 5A 37 94 Ultraband 100 125
Frequently Asked Questions
Q: What are the steps to setting an alarm on a VCR?
A: In order to set an alarm, you need to access the menu display by pressing the menu link located on the main screen. A new interface will appear where you will select the SET CLOCK option and follow the on-screen instructions accordingly.
Q: I am not able to get any videos during playback, what must I do?
A: With this, you want to confirm the plugs connecting the VCR and the television set. Ensure that the VCR is in the correct mode and that the channel is set to the desired one.
Q: I want to record channel A while I am watching channel B, is that possible?
A: Yes, you can use this feature if your cable converter box is connected to the VCR. Simply refer to the instructions mentioned under television VCR with cable.
Q: Is there a requirement for any specific tapes in order to use this particular VCR?
A: This is an exclusive label frozen software, video cassette tapes marked with [VHS] and are approved for two, four, six, and eight hours VHS are the only ones that can be used.
Q: VCR plus programming is required to enable, how do I do it?
A: To set up a timer recording, type the relevant channel and the VCR Plus number when prompted.
Q: What steps do I take in the situation where my remote control won't function at all?
A: Assess if there is a blockage in the line of sight between the remote wing and the VCR. Proceed to turn the batteries on the remote control off and back on. Finally, aim the remote towards the sensor on the VCR.
User Manual
Loading...