How it Works
Philips/Magnavox
Loading...
TP2784C
Instructions For Use Manual
44 pgs2.12 Mb0
Quick Use Manual
4 pgs512.87 Kb0

Philips/Magnavox TP2784C Quick Use Manual

Download
QUICK USE AND INSTALLATION GUIDE
TABLE OF CONTENTS
Getting Started
Warning/Precautions..................................1
Hooking Up Your TV ................................1
How to Use the “INSTALL” Controls ..................2-3
Using the Language Control......................................2
Using the Channel Edit Control ................................3
Setting the Channel Name Control............................3
How to use the SmartClock control ..........................3
12
1
2
3
4
5
6
7
8
9
10
11
• For details on product registration, warranty, and service refer to the other literature included
with your TV information packet.
Please retain all these materials and keep them handy for future reference.
ANT "A" 75
L
AUDIO
R/MONO
IN-1 IN-2 OUT
VIDEO
S-VIDEO
ANT "A" 75
2
IN
OUT
1
Y
our Cable TV input
into your home may be a single (75 ohm) cable or a Converter Box installa­tion. In either case, the connection to the TV is very easy. Just put the threaded end of the cable signal to the TV's antenna plug and screw it down tight.
CABLE TV
CABLE INPUT/CONVERTER
ANT "A" 75
L
AUDIO
R/MONO
IN-1IN-2 OUT
VIDEO
S-VIDEO
ANT "A" 75
2
OR
OUT TO TV
IN FROM ANT.
1
T
he basic Antenna, or
Cable TV, to VCR to TV connection is shown to the right. For more infor­mation on other hookups (possible when Cable Converter/Descrambler boxes are included) refer to your accessory VCR and Cable Converter Owner's Manual for details.
VCR TO TV
BASIC CONNECTION
If your Cable TV sig-
nal is a single round cable (75
ohm) then you're ready to con­nect to the TV.
If you have a Cable TV Converter Box:
Connect the Cable TV signal to the Cable Signal IN(put) plug on the Converter.
Connect the Cable TV cable to the ANTENNA (ANT “A”) plug on the TV. If you have a Cable TV Converter Box:
Connect the OUT(put) plug from the Converter to the ANTENNA (ANT “A”) plug on the TV (connecting cable sup­plied with the Converter).
BEGIN
Connect your Antenna or Cable TV signal to the IN FROM ANT(enna)
plug on the VCR.
Connect the OUT TO
TV plug on the VCR to the
ANTENNA (ANT “A”) plug
on the TV (connecting cable supplied with the VCR).
BEGIN
Back of TV
Round Cable
75Ω Ohm
Cable TV Converter
Box Connection
Cable TV Company
Remember, set the TV for the type signal you've just connected (see the “TUNER” sec­tion on page 2 of this Set-Up Guide).
Your TV can set itself to select only the channel numbers on your Cable system (see “AUTO PRO­GRAM" section on page 2). If you use a Cable Converter box, set the TV to the same channel as the converter's CH 3/4 switch (on the rear of the converter).
SMART
HELP
Cable TV Signal
Round Cable
75Ω Supplied
with VCR
VCR
Outdoor VHF/UHF
Antenna
300 to 75Ω Ohm
Adapter
Cable TV signal
Back of TV
Refer to the Owner's
Manual included with your
VCR for other possible con­nections and TV/VCR operat­ing details.
OR
ANT "A" 75
L
AUDIO
R/MONO
IN-1 IN-2 OUT
VIDEO
S-VIDEO
ANT "A" 75
2
1
A
combination (outdoor
or indoor) antenna receives normal broadcast channels 2-13 (VHF) and 14-69 (UHF). Your con­nection to such an antenna is easy since there is only one antenna plug (75Ω- ohm) on the back of your TV - and that’s where the antenna goes.
ANTENNA
OUTDOOR/INDOOR
Remember, be sure to set the TV for the type sig­nal you've connect­ed (see "TUNER" section on page 2 of this Guide).
To order any optional accessory contact your dealer or call the toll-free accessory ordering number:
1-800-851-8885.
SMART
HELP
If your antenna has a
round cable connector (75
ohm) on the end, then you're ready to connect it to the TV.
If your antenna has flat twin­lead wire (300 ohm), you first
need to attach the antenna wires to the screws on a 300 to 75 ohm adapter.
Push the round end of the
adapter (or antenna) onto the ANTENNA (ANT “A”) plug on the rear of the TV. If the round end of the antenna wire is threaded, screw it down tight.
300 to 75Ω
Adapter
(483521827003)
Twin Lead
Wire
Back of TV
BEGIN
WARNING: TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS UNIT TO RAIN OR EXCESSIVE MOISTURE.
Note: For homes with separate UHF and VHF anten­nas you will need an optional combiner to connect to the TV.
VHFV VHF
UHF
300Ω
75-300 Ω ADAPTER
OR
ANT "A" 75
L
AUDIO
R/MONO
IN-1IN-2OUT
VIDEO
S-VIDEO
U/V Combiner
75-300 Ohm Adapter
Round Cable
75Ω Ohm
Combination VHF/UHF Antenna
(Outdoor or Indoor)
Back of TV
OR
Color Television and Remote Control
NOTE: This Quick Use Guide may be used with other models. Some of the features listed may or may not apply to your TV.
3135 015 12651
INSTALL
REVIEW
PICTURE
SOUND
FEATURES
INSTALL
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
NAME
SMART CLOCK
. .
.
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
NAME
SMART CLOCK
. . .
.
.
.
.
ENGLISH
ESPANOL
. .
.
FREEZE
P
O
W
E
R
S
L
E
EP
POSITION
ON/OFF
A/V
PIP CH
UP
DN
SOURCE
SWAP
SMART
SMART
SOUND
PICTURE
MUTE
CC
STATUS
CLOCK
A/CH
EXIT
TV/VCR
MULTI
MEDIA
INCREDIBLE
STEREO
VCR
RECORD
C
H
V
O
L
M
E
N
U
SU
R
F
TV
VCR
ACC
1
3
4
2
5
INSTALAR
IDIOMA
SINTONIA
AUTO PROGRAM
ED. DE CANAL
NOMBRE
SMART CLOCK
. . .
.
.
.
.
ESPANOL
FRANCAIS
. .
. .
.
INSTALL
LANGUE
SYNTON
AUTO PROGRAM
CHANNEL EDIT
NOM DU CANAL
SMART CLOCK
. . .
.
.
.
.
FRANCAIS
. .
. .
.
.
. .
.
.
HOW TO USE THE INSTALLATION FEATURES
F
or our Spanish and
French speaking TV own­ers, an on-screen LAN­GUAGE option is present. With the LANGUAGE control you can set the TV’s on-screen menu to be shown in either English, Spanish, or French.
LANGUAGE
Press the MENU but-
ton on the remote to show the
on-screen menu.
BEGIN
Press the CURSOR DOWN ■ button four times to select the INSTALL menu.
Press the CURSOR
RIGHT  button to high-
light the Language control options.
Press the CURSOR UP
or CURSOR DOWN ■
buttons to select ENGLISH, ESPANOL (Spanish), or FRANCAIS (French).
Press the CURSOR
RIGHT  button to shift
the menu to the left and high­light the LANGUAGE feature.
INSTALL
REVIEW
PICTURE
SOUND
FEATURES
INSTALL
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
NAME
SMART CLOCK
. .
.
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
NAME
SMART CLOCK
. .
.
.
.
...
.
FREEZE
P
O
W
E
R
S
L
E
E
P
POSITION
ON/OFF
A/V
PIP CH
UP
DN
SOURCE
SWAP
SMART
SMART
SOUND
PICTURE
MUTE
CC
STATUS
CLOCK
A/CH
EXIT
TV/VCR
MULTI
MEDIA
INCREDIBLE
STEREO
VCR
RECORD
C
H
V
O
L
M
E
N
U
S
U
R
F
TV
VCR
ACC
1
3
2
INSTALL
AUTO PROGRAM
TUNER
CHANNEL 12
PLEASE WAIT
.
. .
.
...
.
CABLE
.
INSTALL
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
NAME
SMART CLOCK
. . .
.
.
.
. .
.
4
5
.
.
.
.
.
.
.
Y
our TV can automatically
set itself for local area (or Cable TV) channels. This makes it easy for you to select only the TV stations in your area when the CHANNEL (+), (–) buttons are pressed.
AUTO PROGRAM
Press the MENU but-
ton on the remote to show the
on-screen menu.
BEGIN
Press the CURSOR DOWN ■ button four times to select the INSTALL menu.
Press the CURSOR
RIGHT  button to shift
the menu to the left and high­light the LANGUAGE feature.
INSTALL
REVIEW
PICTURE
SOUND
FEATURES
INSTALL
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
NAME
SMART CLOCK
. .
.
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
NAME
SMART CLOCK
. . .
.
.
.
.
ENGLISH
ESPANOL
. .
.
FREEZE
P
O
W
E
R
S
L
E
E
P
POSITION
ON/OFF
A/V
PIP CH
UP
DN
SOURCE
SWAP
SMART
SMART
SOUND
PICTURE
MUTE
CC
STATUS
CLOCK
A/CH
EXIT
TV/VCR
MULTI
MEDIA
INCREDIBLE
STEREO
VCR
RECORD
C
H
V
O
L
M
E
N
U
S
U
R
F
TV
VCR
ACC
1
6
3
5
2
4
.
INSTALL
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
NAME
SMART CLOCK
. .
.
.
.
.
CABLE
. .
.
.
. .
.
INSTALL
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
NAME
SMART CLOCK
. .
.
.
.
.
CABLE
. .
.
.
.
INSTALL
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
NAME
SMART CLOCK
. .
.
.
.
.
AUTO
. .
.
.
.
INSTALL
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
NAME
SMART CLOCK
. .
.
.
.
.
ANTENNA
. .
.
.
Y
ou need to make sure the
TV is set to pick up either Cable TV or Antenna signals. In other words, the TV needs to know if you want to receive channels coming from a Cable TV signal or a normal Antenna signal connected to the TV’s ANT Input.
TUNER
Press the MENU but-
ton on the remote to show the
on-screen menu.
BEGIN
Press the CURSOR DOWN ■ button four times to select the INSTALL menu.
Press the CURSOR
RIGHT
 button to high-
light the TUNER options.
Press the CURSOR UP
or the CURSOR DOWN
■ button to select either CABLE, AUTO, or ANTENNA.
Press the CURSOR
RIGHTbutton to shift
the menu to the left and high­light the LANGUAGE feature.
Press the CURSOR DOWN ■ button to highlight the AUTO PROGRAM control.
Press the CURSOR
RIGHT  button to start
the Auto Program scanning of channels.
Try it out. Press the
CHANNEL (+), (–) but­tons and see which channels you can select.
Remember, an antenna or cable TV signal must be first con­nected to your TV.
If you want to delete any unwant­ed channels from the TV’s mem­ory, see the CHANNEL EDIT section on the next page.
SMART HELP
Remember, the
Language control only makes the TV’s on-screen MENU items appear in English, Spanish, or French
text. It does not change the other on-screen text features such as Closed Caption (CC) TV shows.
Pressing the STATUS/EXIT button after making adjust­ments to the TV will remove the menu from the screen.
SMART HELP
Press the CURSOR
DOWN ■ button to highlight
the TUNER control.
When CABLE is
selected, channels 1-125
are available.
When ANTENNA is selected, channels 2-69 are available.
SMART HELP
INSTALL
REVIEW
PICTURE
SOUND
FEATURES
INSTALL
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
NAME
SMART CLOCK
.
.
.
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
NAME
SMART CLOCK
. . .
.
. 
.
.
.
CHANNEL
ADD
. .
FREEZE
P
O
W
E
R
S
L
E
E
P
POSITION
ON/OFF
A/V
PIP CH
UP
DN
SOURCE
SWAP
SMART
SMART
SOUND
PICTURE
MUTE
CC
STATUS
CLOCK
A/CH
EXIT
TV/VCR
MULTI
MEDIA
INCREDIBLE
STEREO
VCR
RECORD
C
H
VO
L
M
E
N
U
S
U
R
F
TV
VCR
ACC
1
3
5
2
4
INSTALL
CHANNEL EDIT
.
.
.
...
CHANNEL 12
ADD
..
. . .
.
INSTALL
CHANNEL EDIT
.
.
.
...
CHANNEL 12
ADD
.
.
. . .
.
INSTALL
CHANNEL EDIT
.
.
.
...
CHANNEL 12
DELETE
.
.
. . .
.
6
6
8
7
. 
. .
HOW TO USE THE INSTALLATION FEATURES
C
hannel Edit makes it easy
for you to ADD or DELETE channels from the list of channels stored in the TV’s memory.
CHANNEL EDIT
Press the MENU but-
ton on the remote to show the
on-screen menu.
BEGIN
Press the CURSOR DOWN ■ button four times to select the INSTALL menu.
Press the CURSOR DOWN ■ button to highlight the CHANNEL EDIT control.
Press the CURSOR
RIGHT  button to access
the CHANNEL EDIT menu. CHANNEL will be highlighted.
Press the CURSOR
RIGHT  button to shift
the menu to the left and high­light the LANGUAGE feature.
FREEZE
P
O
W
E
R
S
L
E
E
P
POSITION
ON/OFF
A/V
PIP CH
UP
DN
SOURCE
SWAP
SMART
SMART
SOUND
PICTURE
MUTE
CC
STATUS
CLOCK
A/CH
EXIT
TV/VCR
MULTI
MEDIA
INCREDIBLE
STEREO
VCR
RECORD
C
H
V
O
L
M
E
N
U
S
U
R
F
TV
VCR
ACC
7
INSTALL
REVIEW
PICTURE
SOUND
FEATURES
INSTALL
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
NAME
SMART CLOCK
. .
.
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
NAME
SMART CLOCK
. . .
.
.
.
.
12
. .
1
3
5
2
.
6
.
INSTALL
. . .
.
.
.
PERSONAL
. .
.
.
.
INSTALL
LANGUAGE
AUTO PROGRAM
TUNER
CHANNEL EDIT
NAME
. . .
.
.
.
C
. .
.
.
.
CBS
.
6
6 CBS
12:00 PM
STEREO
6
4
.
.
.
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
NAME
SMART CLOCK
ABC
ACTS
.
T
he channel NAME feature
allows you to list the “call” letters of your favorite stations beside their channel numbers when they appear on the screen. The TV has in mem­ory a list of the 50 most popu­lar channel names (for exam­ple, ABC, NBC, FOX, etc.). You can also enter a custom name (up to four digits).
NAME
Press the MENU but-
ton on the remote to show the
on-screen menu.
BEGIN
Press the CURSOR DOWN ■ button four times to select the INSTALL menu.
Press the CURSOR
DOWN ■ button to highlight
the NAME control.
Once you have selected a
name for the channel, press
the CURSOR RIGHT  button again to SAVE the
name in the TV’s memory.
Press the STATUS/EXIT button to clear the menu from
the screen
Press the CURSOR RIGHT  button to shift
the menu to the left and high­light the LANGUAGE feature.
INSTALL
REVIEW
PICTURE
SOUND
FEATURES
INSTALL
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
NAME
SMARTCLOCK
. .
.
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
NAME
SMARTCLOCK
. . .
.
.
.
...
.
.
This TV contains a clock which can automatically be set through the SMARTCLOCK Feature.
Press ">" to Continue
SET TIME
AUTO MANUAL
Press " " to select Press ">" to Continue
>
Press " " to select the time zone that you live in
ATLANTIC EASTERN CENTRAL MOUNTAIN
Press ">" to Continue
>
Daylight Savings Time
Yes No
Press " " to select
Press ">" to Continue
>
The time is broadcast by certain TV stations. We suggest trying PBS first.
Enter the PBS channel
10
Press ">" to Continue
Please wait...
12:30 PM
use " " to set AM/PM
Press ">" to Continue
Time was not found on channel
Enter another channel Set time Manually
Press " " to select
Press ">" to Continue
>
The time is broadcast by certain TV stations. We suggest trying PBS first.
Enter the PBS channel
2
Press ">" to Continue
>
Time was found
Press ">" to Continue
12:30 PM
use " " to set AM/PM
Press ">" to Continue
>
.
.
SET TIME
AUTO MANUAL
Press " " to select Press ">" to Continue
>
>
>
>
>
>
>
>
S
martClock can automati-
cally set the TV’s on­screen clock. Since the time is received from a broadcast sig­nal, be sure that a Cable TV or Antenna signal is present before attempting to use the SmartClock feature.
SMARTCLOCK
Press the MENU but-
ton on the remote to show the
on-screen menu.
BEGIN
Press the CURSOR DOWN ■ button four times to select the INSTALL menu.
Press the CURSOR DOWN ■ button to highlight the SMART CLOCK control.
Press the CURSOR
RIGHT  button to shift
the menu to the left and high­light the LANGUAGE feature.
Select the channel you want to ADD or DELETE with the CH (+) or (–) buttons. (OR, use the Numbered buttons.)
Press the CURSOR DOWN ■ button to highlight the ADD/DELETE option.
Press the CURSOR UP
or DOWN ■ button to
ADD or DELETE the channel from memory.
To clear the screen, press the
STATUS/EXIT button.
Press the CURSOR RIGHT button to high- light the NAME options area.
Using the CURSOR UP
or DOWN ■ buttons, scroll
through a list of channel names provided in the TV’s memory.
You can also enter a channel name manually. Press the
CURSOR RIGHT  button again when PERSONAL is highlighted, then use the CUR­SOR UP and DOWN ■ buttons to scroll through a list
of options for the first digit.
Press the CURSOR RIGHT
 button and repeat for the
second, third, and fourth digit.
OR
Press the CURSOR
RIGHT  button to start
the SMART CLOCK feature. Just follow the on-screen instructions to set the clock.
Note: When setting the clock manually, use the number buttons on the remote to enter the time. Don’t forget to set AM or PM with the cursor Up or Down button.
Follow these
on-screen
instructions to
set the
SmartClock
Automatically.
Follow these
on-screen
instructions to
set the
SmartClock
Manually.
OR
SLEEP
POWER
AV
ON/OFF
POSITION
FREEZE
TV
VCR
ACC
SWAP
SOURCE
PIP CH
SMART
SOUND
SMART
PICTURE
VOL
CH
MUTE
DN
UP
M
ENU
SURF
CC
STATUS CLOCK A/CH
EXIT
TV/VCR
INCREDIBLE
STEREO
MULTI
MEDIA
VCR
RECORD
3
4
6
CHANNEL
VOLUME
+
–
2
3
MENU
POWER
12:00 PM
STEREO
1
TV AND REMOTE CONTROL OPERATION
TELEVISION
T
o load the supplied bat-
teries into the remote:
1. Remove the battery compartment lid on the
back of the remote.
2. Place the batteries (2­AA) in the remote. Be
sure the (+) and (-) ends of the batteries line up correctly (inside of case is marked).
3. Reattach the battery lid.
BATTERY INSTALLATION
Point the remote con-
trol toward the remote sensor window on the TV when oper­ating the TV with the remote.
BEGIN
Press the POWER
button
to turn the TV ON.
Press the VOLUME +
button to increase the sound
level
or the VOLUME –
button to lower the sound level.
Pressing both buttons at the same time will display the on-
screen menu. Once in the menu, use these buttons to make adjustments or selections.
Press the CHANNEL UP
▲ or DOWN ▼ button to select TV channels. Use these buttons to make adjustments or selec­tions in the on-screen menu.
Note: Always press two number buttons on the remote for chan­nels under 100. Press three number buttons for channels 100 or above. For example: Press "0" then "6" for channel 6, or press “1” then “2” then “5” for channel 125.
REMOTE
BEGIN
Slide the TV/VCR/ACC
mode switch on the remote
control to the TV position and point the remote at the front of the TV when sending com­mands.
The remote's TV/VCR/ACC Switch controls how buttons
on the remote are used.
For example:
With the switch in the "TV" position:
the Menu, CURSOR ,
,  and ■ buttons
are used to select and adjust on-screen TV features.
With the switch in the "ACC" position:
the Power, Channel Number, and Channel Up (+) /Down (–) buttons on the remote work with Cable TV Converters.
With the switch in the "VCR" position:
the Menu, CURSOR ,
,  and ■ buttons
on the remote work Stop, Play, Fast Forward, and other VCR features.
Note: For more details on how the TV remote works with VCRs and Cable Converters, see the other owner's manual supplied with your TV.
TV/VCR/ACC MODE
SWITCH
SLEEP
POWER
AV ON/OFF POSITION FREEZE
TV
VCR
ACC
SWAP SOURCE PIP CH
UP
DN
SMART
SOUND
SMART
PICTURE
MENU
SURF
VOL CH
MUTE
CC STATUS CLOCK A/CH
EXIT
TV/VCR
RECORD MEDIA
INCREDIBLE
STEREO
VCR MULTI
Power Button
Press to turn the TV (or select VCR/ Cable Converter) ON and OFF.
PIP Buttons
Press to operate Picture-In-Picture fea­tures. See "PIP" section in your other owner's manual for details.
Light Button
Press to back light the Menu, Surf, Cursor, Volume, and Channel buttons.
Number Buttons
Press the number buttons to select TV channels. Press two
number buttons to select single digit channels. For example: press "0" then "6" for channel 6.
Smart Pictur
e Button
Press to select from a list of Smart Picture controls (factory preset picture control levels set for different types of viewing sources and programs).
Surf Button
Press to select previously viewed chan­nels. You can place up to 10 channels in memory. Then by pressing the SURF but­ton you can quickly view the select chan­nels. See the “Surf" section (in your other owner's manual) to see how to select a series of channels using the Surf button.
Channel (+), (–) Buttons
Press to change the tuned channel.
A/CH Button
Press to toggle between the currently viewed channel and the previously viewed channel.
Clock-TV/VCR Button
When in TV mode, press to access the TIMER feature where you can set the TV’s clock. When in the VCR mode, this button can be used to quickly toggle between the VCR A/V connection and the last viewed TV channel.
Multi Media Button
Press to toggle between the external input jacks. This button will tune to MM 1, MM 2, or the currently tuned channel along with setting the picture controls to the Smart Picture setting for Multi Media viewing.
Incredible Stereo Button
Press to toggle between the Mono and Spatial sound controls (expands the stereo sound for a fuller, more dynamic listening experience). Also press to toggle between STEREO and INCR. SURROUND if a station is broadcasting in stereo.
Sleep Button
Press to set the TV to automatically turn itself OFF. Also can be used as an Enter but­ton when sending channel commands to remote controlled cable converters or VCRs.
AV Button
Press to toggle between the external Audio/Video input jacks. This button will tune to the AV 1, AV 2 or current tuner channel.
TV/VCR/ACC Mode Switch
Slide to position of TV to control TV functions, VCR to control VCR functions and ACC for Cable Converter, DBS, DVD, etc., functions.
Smart Sound Button
Press to select from a list of Smart Sound settings (factory preset sound control levels set for different types of programming).
Menu Button
Press for the on-screen menu to appear. Pressing the menu button after menu selec­tions are made will either return to a previous menu or remove the menu from the screen.
Cursor Buttons
Use these buttons to move through the on­screen menu, make selections within the menu or make adjustments to the menu. Also used with a VCR for PLAY, FAST FOR­WARD, REWIND, and STOP.
Volume (+), (–) Buttons
Press to adjust the TV sound level.
Mute Button
Press to turn the sound OFF on the TV. Press again to return the sound to its previous level.
CC Button
Press to select Closed Caption options within the menu. (Refer to the Owner’s Manual for details.)
Status/Exit Button
Press to see the current channel number on the TV screen. Also press to remove the menu from the screen.
VCR-Record Button
When in the VCR mode, press the VCR/RECORD and PLAY buttons to start the
SMART HELP
Remember, you can
press any button on the front of the TV to turn the TV ON.
The tuned channel number will always briefly appear when the TV is first turned ON (and with channel changes).
You can also press the STATUS button (on the remote) to see what channel the TV is ON.
Remote Sensor Window
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use