Owner’s Manual
TB600MG2F
HD Streaming Player with Built-in WiFi
© 2011 Funai Electric Co., Ltd.
1. CONTENTS
1. CONTENTS ................................................................................2
2. FEATURES .....................................................................................3
2.1 Features ...........................................................................................3
2.2 Product Info ..................................................................................4
3. FUNCTIONAL OVERVIEW ...............................................5
3.1 Top / Front Panel .......................................................................5
3.2 Rear Panel ......................................................................................5
3.3 Remote Control .........................................................................6
3.4 Guide to On-Screen Display ..............................................8
4. CONNECTIONS .....................................................................9
4.1 HDMI Video / Audio Connection .................................... 9
4.2 Standard Video + Standard Audio Connection ...... 9
4.3 Connection to an Audio System ................................... 10
4.4 Connection to the Network ........................................... 11
5. BEFORE YOU START ..........................................................13
5.1 Finding the Viewing Video Source Input
on Your TV ................................................................................. 13
5.2 Initial Setup ................................................................................. 13
12. SAFETY INSTRUCTIONS ................................................30
13. MAINTENANCE ...................................................................31
14. SUPPLIED ACCESSORIES ................................................31
15. INSTALLING ON A WALL OR SHELF ....................32
16. TRADEMARK INFORMATION ....................................33
17. GLOSSARY ...............................................................................34
18. ESPAÑOL ...................................................................................36
18.1 Mando a Distancia ................................................................. 36
18.2 Encontrar la Entrada de Fuente
de Video en su TV ................................................................ 37
18.3 Instalación Inicial ...................................................................... 37
LIMITED WARRANTY ..............................................back cover
6. USING NETWORK FEATURES ....................................14
6.1 Preparation for Network Features .............................. 14
6.2 Information on Network Services ............................... 14
7. LIST OF SETTINGS ..............................................................15
8. SETUPS ........................................................................................17
8.1 Network Connection........................................................... 17
8.2 fun-Link (HDMI CEC) .......................................................... 22
8.3 HDMI Video Resolution ...................................................... 22
8.4 Software Update ..................................................................... 23
8.5 Initialize ......................................................................................... 24
9. TROUBLESHOOTING .......................................................25
10. SPECIFICATIONS ..................................................................28
11. NETWORK SERVICE DISCLAIMER ...........................29
EN-2
2. FEATURES
2.1 Features
VUDU
This unit supports VUDU which is the leading HD on-demand video service. With VUDU, you can also enjoy
various kinds of Internet applications. In order to use this feature, you must connect this unit to the Internet.
(This feature is only available in the United States.)
Netflix
With this unit, you can enjoy movies and TV episodes streamed instantly from Netflix via the Internet. In order to
use this feature, you must visit netflix.com/Magnavox on your PC and become a Netflix member. (This feature is
only available in the United States.)
Film Fresh / Blockbuster
With this unit, you can enjoy movies and TV episodes streamed instantly from Film Fresh / Blockbuster via the
Internet. In order to use this feature, you must visit the below websites on your PC and become a Film Fresh /
Blockbuster member. (This feature is only available in the United States.)
- Film Fresh : filmfresh.roxionow.com/Login
- Blockbuster : www.blockbuster.com/auth/login
EN
Pandora® internet radio
This unit supports Pandora internet radio service. You can instantly listen to free personalized radio stations
streamed over the Internet from Pandora. In order to use this feature, you must visit the below website on your
PC and become a Pandora member. (This feature is only available in the United States.)
- www.pandora.com/magnavox
Picasa
With Picasa application, you can browse your web albums on your TV screen. Picasa helps you organize a number of
photographs of yours, so you can easily find particular photographs with an easy operation.
Easy and simple connection to your HDTV with an HDMI (High-Definition Multimedia Interface) cable
Connect this unit to your HDTV with one single HDMIcable. It is recommended to use a High Speed HDMI cable
for better compatibility. The high-definition video output signal will be transferred to your HDTV without conversion to
analog signals, so you will get excellent picture and sound quality, completely free from noise. Thanks to other multiple
outputs, you can also easily connect to your home theater system or amplifier.
fun-Link (HDMI CEC) (Consumer Electronics Control)
This unit supports fun-Link (HDMI CEC), which allows integrated system control over an HDMI cable and is part of
the HDMI standard. This function may not work properly on some devices.
HDMI Deep Color
Deep Color reduces posterization (color banding) effect of the playback image.
EN-3
2.2 Product Info
“Product Info” screen provides information about this unit’s software version. When a newer version of software is
available, you can update the software via the Internet.
To access “Product Info”, follow the procedure below.
1. Press [HOME].
2. Use [Í / Æ] to select “Settings”, then press [OK].
3. Use [Î / ï] to select “Product Info”.
ɶ Netflix ESN
You can view the ESN (Electronic Serial Number, which Netflix uses to identify your device) on the “Product Info”
screen.
EN-4
3. FUNCTIONAL OVERVIEW
3.1 Top / Front Panel
1
2
1. Infrared sensor window
2. Standby/on indicator
FrontTo p
D Note
• Due to new ENERGY STAR® requirements, this unit will automatically turn On the screen saver after 5 minutes
of inactivity and enter Standby mode after 25 minutes of inactivity.
3.2 Rear Panel
EN
12345
1. LAN terminal
2. HDMI OUT jack
3. VIDEO output jack
4. AUDIO output jacks (L/R)
5. DC IN jack
C Caution
• Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage
to the unit.
• This unit does not have a TV RF modulator.
EN-5
3.3 Remote Control
6. ¢ (reverse) button
During playback, press to fast reverse the playback.
7. B (play) button*
10
1
2
3
4
5
6
7*
8
9
11
12
13
14
15
16
17
Press to start playback or resume playback.
8. H (skip) button
During playback, press once to return to the
beginning of the current title.
9. Ê (stop) button
Press to stop playback.
10. NETFLIX button
Press to launch Netflix.
11. DISPLAY button
Press to display the on-screen display menu.
12. OK button
Press to confirm or select menu items.
13. RETURN button
Press to return to the previous menu screen or
screen function.
14. ∫ (forward) button
*
The unit can also be turned On by pressing this button.
1. . (Standby/on) button
Press to turn On the unit, or to switch the unit into
Standby mode. (To completely turn Off the unit,
you must unplug the AC adapter.)
2. HOME button
Press to display the home menu.
3. OPTION button
If a newer software is found when “Auto Update
Check” is set to “On”, the update notification
appears in the home menu screen. Press this button
to start update.
During playback, press to fast forward the playback.
When playback is in pause, press to slow forward
the playback.
15. G (skip) button
During playback, press to skip to the next title.
16. Δ (pause) button
Press to pause playback.
17. VUDU button
Press to launch VUDU.
D Note
• When the unit receives a signal from the remote
control, the Standby/on indicator on the top panel
turns Off.
4. Î / ï / Í / Æ buttons
Press to select items or settings.
5. NET APP button
Press to display the network application menu.
EN-6
Continued on next page.
ɶ Installing the Batteries in the Remote Control
Install 2 AAA (1.5V) batteries matching the polarity indicated inside the battery compartment of the remote control.
C Caution
Incorrect use of batteries can result in hazards, such as leakage and bursting. Please observe the following:
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.
• Do not mix new and old batteries together.
• Do not use different kinds of batteries together. Although they may look similar, different batteries may have
different voltages.
• Make sure that the + and - ends of each battery match the indications in the battery compartment.
• Remove batteries from the battery compartment when the remote is not going to be used for a month or more.
• When disposing of used batteries, please comply with governmental regulations or environmental public rules
that apply in your country or area.
EN
• Do not recharge non-rechargeable batteries.
• Do not short-circuit, heat or burn any batteries.
ɶ Using the Remote Control
Remote Control Usage Guidelines:
• To check remote operation, aim the remote at the unit then press any arrow button. The Standby/on Indicator
on the unit will turn Off when the button is pressed and turn On again when the button is released. This
confirms that the unit is receiving the IR remote signal.
• Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit.
• Do not mount the device on the wall behind the TV as this would block the infrared sensor window from the
remote infrared signal.
• Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the infrared sensor
window of the unit.
• Remote controls of different devices can interfere with each other. Avoid using a remote control of another
device which is located close to the unit.
• Replace the batteries when you notice a fall-off in the operating range of the remote control.
• The maximum operable ranges from the unit are as follows.
Line of sight : approx. 23 feet (7 m)
Either side
: approx. 16 feet (5 m) within 30°
of the center
Above : approx. 16 feet (5 m) within 15°
Below : approx. 10 feet (3 m) within 30°
30˚ 30˚
30˚ 30˚
EN-7
3.4 Guide to On-Screen Display
ɶ Home Menu
When you turn On the unit, the home menu will automatically appear. Otherwise, press [HOME].
1 2 3
NET APP
1. “NET APP”
2. “Settings”
3. “Network Setup”
ɶ Setup Menu
Video Out
1
Audio Out
System
Network Setup
Product Info
1. Categories
2. Menus / Options
Video Resolution
TV Aspect
Deep Color
: To access the menu of network services
: To access the setup menu
: To configure network settings
: HDMI Auto
: 16:9 Wide
: Auto
2
: Displays options for the highlighted item on the left whenever available.
EN-8
4. CONNECTIONS
4.1 HDMI Video / Audio Connection
(Supports up to 1080p (outputs video data with a frame rate of 60 frames per second.)
EN
HDMI cable (not supplied)
HDMI IN
No audio connection required.
• Make sure the shapes of the jack and the connector are matched and do not tilt the HDMI connector when
inserting it into the HDMI jack.
• When connected to an HDCP incompatible display device, the picture will not be displayed properly.
• Use an HDMI cable with the HDMI logo (a certified HDMI cable) for this connection.
High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for better compatibility.
4.2 Standard Video + Standard Audio Connection
(Supports only 480i resolution.)
AUDIO IN
R
L
Audio cable (supplied)
VIDEO IN
Video cable (supplied)
• Connect this unit directly to the TV. If the audio / video cables are connected to a VCR, then the pictures may
be distorted due to the copyright protection system.
EN-9
4.3 Connection to an Audio System
• When you change the connections, you should turn Off all the devices.
• When making connections with external devices, please refer to their user manuals for additional setup help.
ɶ 2-Channel Analog Audio Connection
Stereo system with analog audio input jacks
AUDIO IN
R
L
Audio cable (supplied)
ɶ HDMI Audio Connection
AV receiver/amplifier with an HDMI input jack
HDMI IN
HDMI cable (not supplied)
ɶ HDMI Audio Out
Audio Source PCM Stereo Bitstream PCM 5.1ch
VUDU
Netflix WMA 2cn LPCM 2cn LPCM 2cn LPCM
Film Fresh AAC 2cn LPCM 2ch AAC 2cn LPCM
Blockbuster AAC 2cn LPCM 2ch AAC 2cn LPCM
Pandora
Dolby Digital Plus 2cn LPCM Dolby Digital Plus Multi LPCM
MP3 2cn LPCM 2cn LPCM 2cn LPCM
®
MP3 2cn LPCM 2cn LPCM 2cn LPCM
*
*
Fully decoded.
D Note
• If the connected device is not compatible with the HDMI BITSTREAM then audio will be output as multi LPCM
or 2-channel down-mixed LPCM based on the capability of the connected device even if you select “Bitstream”
in “Audio Out” setting.
• If the connected device is not compatible with AAC, audio will be output as LPCM based on the capability of the
connected device.
EN-10
4.4 Connection to the Network
By connecting this unit to the Internet you can update the software via the Internet or play contents of the network
services. For more information about a software update, refer to “Network Update” on page 24.
D Note
• Wired connection is recommended when using the following features. (Using the following features with a
wireless connection can be affected by other devices using radio frequencies.)
- Video streaming services (VUDU / Netflix / Film Fresh / Blockbuster)
®
- Listening to Internet radio (Pandora
)
- Network update
ɶ Wired Connection
Networking equipment
(modem, etc.)
Internet
LAN
LAN cable (not supplied)
WAN LAN
Broadband router or hub
12345
LAN cable (not supplied)
C Caution
• Do not insert any cable other than a LAN cable to the LAN terminal to avoid damaging the unit.
EN
• Do not connect your PC directly to the LAN terminal of this unit.
D Note
• After you make a wired connection, perform the necessary network setup. (For network settings of a wired
connection, refer to “Wired” on page 17.)
• If your cable modem does not have router functions, use a wired router.
• If your cable modem has router functions but there is no vacant port, add a hub.
• For a wired router, use a router which supports 10BASE-T / 100BASE-TX ETHERNET standard.
• Please purchase shielded LAN cables at your local store and use them to connect the unit to network
equipment.
Continued on next page.
EN-11
ɶ Wireless Connection
Networking equipment
(modem, etc.)
Internet
LAN WAN
Wireless router
LAN cable (not supplied)
D Note
• After you made a wireless connection, perform the necessary network setup. (For the network settings of a
wireless connection, refer to “Wireless” on page 19.)
• For a wireless router, use a router which supports IEEE 802.11 b/g/n. (”n” type is recommended for stable
operations of the wireless network.)
• Set the wireless router to Infrastructure mode. This unit does not support Ad-hoc mode.
• Other radio devices or obstacles may cause interference to a wireless network connection.
EN-12
5. BEFORE YOU START
5.1 Finding the Viewing Video Source Input on Your TV
After you have connected this unit to your TV with either an HDMI cable or video and audio cables, find the
viewing source (external input source) on your TV.
1. Turn On your TV.
2. Press the button on the TV’s remote control that accesses the external input source. It may be labeled
“SOURCE”, “AV”, ”AUX” or “INPUT” (refer to your TV’s user manual).
3. Plug the AC adapter for this unit into the unit (DC IN jack) and then into an AC outlet.
Please Wait...
This is the correct viewing source (external input source).
• If the TV is connected with an HDMI cable, it may take a while for the opening picture to come up.
• “Please Wait...” screen is output only when the unit is connected to a TV with an HDMI cable.
5.2 Initial Setup
Please follow the instructions below to complete the initial setup.
1. While the welcome screen is displayed, use [Í / Æ] to select “Next”, then press [OK].
EN
2. Language setup screen will appear. Use [Î / ï] to select your language, then press [OK]. After this, use
[Î / ï / Í / Æ] to select “Next”, then press [OK].
Please select your language for on-screen display.
[Language]
English
Français
Español
ReturnNext
3. “Auto Update Check” screen will appear. Use [Î / ï] to select the desired mode, then press [OK]. After this,
use [Î / ï / Í / Æ] to select “Next”, then press [OK].
• Network setup screen will appear. In order to proceed with the network setup, see “Network Connection”
on page 17.
• This unit automatically detects whether or not a LAN cable is connected to it.
- If a LAN cable is connected to this unit, “Wired IP Settings” screen will appear.
- If a LAN cable is not connected to this unit, “Wireless” screen will appear.
EN-13
6. USING NETWORK FEATURES
7
3
6
2
8
4
5
6.1 Preparation for Network Features
Please follow the instructions below before using the network features.
1. Connect this unit to the Internet.
• Refer to “Connection to the Network” on page 11.
2. Perform the necessary network connection setup.
• Refer to “Network Connection” on page 17.
3. Press [NET APP].
NET APP 1
NET APP
NET APP 5NET APP
NET APP 2NET APP
NET APP 6NET APP
NET APP 3NET APP
NET APP 7NET APP
NET APP 4NET APP
NET APP 8NET APP
4. Select the desired application, then press [OK].
• For the first time only, the “Network Service Disclaimer” screen will appear. After confirming the content, use
[Í / Æ] to select “Agree”, then press [OK].
5. Press [HOME] to exit.
D Note
• The Network Service Disclaimer is displayed when first using a network service and its acceptance is applied to
all network services.
6.2 Information on Network Services
For detailed information on the third-party Internet services, please visit each service provider’s website:
Netflix : http://www.netflix.com/HowItWorks
Film Fresh : http://filmfresh.roxionow.com/
Blockbuster : http://www.blockbuster.com
VUDU : http://www.vudu.com/product_overview.html
Pandora : http://www.pandora.com
EN-14
7. LIST OF SETTINGS
In the setup menu, you can customize various kinds of settings as you prefer. Refer to the following instructions to
navigate through the setup menu.
1. Press [HOME] to access the home menu.
2. Use [Í / Æ] to select “Settings”, then press [OK].
3. Use [Î / ï] to select the desired setting, then press [OK].
4. Use [Î / ï] to move the highlight up and down in the list.
5. To make a selection or to access options of an item, select the desired item, then press [OK].
• To go back to the previous screen, press [RETURN].
6. Press [HOME] to exit.
Refer to the following table for the types of settings you can customize.
The item highlighted in gray is the default setting.
Categories Menus / Options
Settings Video Out Video Resolution HDMI Auto
1080p
1080i
720p
480p
480i
TV Aspect 16:9 Wide
16:9 Pillarbox
4:3 Pan & Scan
4:3 Letterbox
Deep Color Auto
Off
Audio Out DRC On
Off
Digital Output PCM Stereo
Bitstream
PCM 5.1
EN
Continued on next page.
EN-15
Categories Menus / Options
Settings System Language English
Français
Español
fun-Link (HDMI CEC) On
Off
Auto Update Check On
Off
Network Update
Initialize Restore factory settings
and deactivate all
connected applications
Restore factory settings
Deactivate all connected
applications
Deactivate Netflix
Deactivate BLOCKBUSTER
Deactivate FILM FRESH
Deactivate Picasa
Deactivate Pandora
Deactivate VUDU
Disclaimer
OSS
Network Setup Network List
Easy Connect (WPS)
Manual
IP Settings
Network Test
Product Info
EN-16
8. SETUPS
8.1 Network Connection
[HOME]
Perform the network connection setup in order to use the network features, such as Netflix / BLOCKBUSTER /
FILM FRESH / Picasa / Pandora / VUDU and the network update function.
“Network Setup”
Ȼ
D Note
• Once a network connection is established, you are ready to use the network features, such as Netflix /
BLOCKBUSTER / FILM FRESH / Picasa / Pandora / VUDU and the network update function, using the Internet
without making any additional settings.
• If a network connection could not be established, you may need to check your router settings and make sure the
physical connection is secure. If you need the MAC address of this unit to complete your router settings, you
can view it on “Network Setup” screen under “Settings” in the home menu.
• When connecting this unit directly to a modem for the first time or connecting it to a modem which was
previously connected to any other network device (e.g. a router, PC, etc.), you may have to power cycle the
modem (unplug the modem’s and/or router’s AC plug from its AC outlet for 30 seconds and then plug it back
in), this may reset the settings in the modem.
If you have a telephone/Internet modem with your cable service then you may have to use its reset button or
remove the backup battery to reset this type of modem.
ɶ Wired
EN
Connect this unit to a modem / router with a LAN cable before setting up. This unit will then automatically detect
the LAN connection and leads you to the appropriate setup screen.
Auto (Wired)
Select “Auto” to set the network setting automatically.
1. Use [Í / Æ] to select “Network Setup” in the home menu, then press [OK].
2. At “IP Mode”, press [OK] , and set it to “Auto”, then press [OK].
3. Use
4. If the network test passes, press [OK].
[Î / ï / Í / Æ]
• The unit will start a network test, and the test result will appear right after the test finishes.
to select “Apply”, then press
[OK]
.
Continued on next page.
EN-17
Manual (Wired)
In the following cases, select “Manual”(wired) to set each setting as necessary.
- If a network connection could not be established when the setting was “Auto”(wired).
- When instructed by your Internet service provider to make specific settings in accordance with your network
environment.
1. Use [Í / Æ] to select “Network Setup” in the home menu, then press [OK].
2. At “IP Mode”, press [OK] , and set it to “Manual”, then press [OK]
Wired IP Settings
Link Status :Link Up
MAC Address :
IP Mode :Manual
Please choose a new IP Mode value
IP Address :XX:XX:XX:XX:XX
Manual
Subnet Mask :XX:XX:XX:XX:XX
Auto
Default Gateway :XX:XX:XX:XX:XX
Primary DNS :XX:XX:XX:XX:XX
Secondary DNS :XX:XX:XX:XX:XX
XX:XX:XX:XX:XX
...
Cancel Network TestApply
3. Use [Î / ï] to select “IP Address”, then press [OK].
4. The IP address setting screen will appear. Enter an IP address
then select “Done”, then press [OK]
Wired IP Settings
Link Status :Link Up
MAC Address :
IP Mode :Manual
Valid range of each segment is 0 to 225.
IP Address :
Current Value xxx.xxx.x.xxx
Subnet Mask :
New Value . . .
Default Gateway :
Done
Primary DNS :XX:XX:XX:XX:XX
Secondary DNS :XX:XX:XX:XX:XX
XX:XX:XX:XX:XX
Please enter a new IP Address.
XX:XX:XX:XX:XX
XX:XX:XX:XX:XX
XX:XX:XX:XX:XX
1234567890
q
asdfghjk l ;
zx
y
we r
cvbnm, . /
Space
-=\[]'`
Cancel Network TestApply
uo
p
.
using
.
[Î / ï / Í / Æ]
on the software keyboard,
• The software keyboard shows up by pressing [OK] on the remote while in a number cell.
• When inputting a single character using the software keyboard as soon as you press [OK] on the remote to
input that character, then the character is displayed for a very short time to allow you to confirm that this was
the correct character.
• Enter an IP address after checking the specifications of your router.
• If an IP address is unknown, check the IP address of other devices (e.g. PC connected with a LAN cable).
Then, in the furthest cell to the right, assign a different number from those other devices.
5. Use [Î / ï] to select “OK”, then press [OK].
6. Repeat the same procedure as steps 4 to 5 for “Subnet Mask”, “Default Gateway”, “Primary DNS” and
“Secondary DNS”.
• Enter the DNS addresses provided by your Internet provider.
• If the DNS address is unknown, check the DNS address of other devices (e.g. PC connected with a LAN
cable) and assign the same DNS address.
7. Use [Î / ï / Í / Æ] to select “Apply”, then press [OK].
• The unit will start a network test, and the test result will appear right after the test finishes.
8. If the network test passes, press [OK] to exit.
Continued on next page.
EN-18
D Note for “IP Address”, “Subnet Mask”, “Default Gateway”, “Primary DNS” and “Secondary DNS”
• The range of input numbers is between 0 and 255.
• When you enter a wrong number, click on on the software keyboard to clear the incorrect number.
• To correct the wrong number in the previous cell, press [RETURN] to start over.
• If you want to enter a 1 or 2-digit number in one cell, type in on the software keyboard “001” for a 1-digit
number, and “011” for a 2-digit number.
ɶ Wireless
This unit automatically detects nearby wireless networks when a LAN cable is not connected to the unit. Please
make sure a LAN cable is not connected to the LAN terminal of this unit when making a wireless connection.
Before proceeding with the setup, make a note of the SSID (your network name) and its password (WEP / WPA
key).
Network List (Wireless)
1. Use [Í / Æ] to select “Network Setup” in the home menu, then press [OK].
2. Use [Î / ï] to select “Network List”, then press [OK].
• This unit will automatically start searching for wireless networks.
3. The result of wireless network searching will be displayed. Use [Î / ï] to select the appropriate SSID, then press
[OK].
• If you select an SSID with “
Network List
ABCDEWiFi
WiFi
WiFi
WiFi
12345
abcde
67890WiFi
fghij
”, please go to step 4.
EN
4. “Password” entry screen will appear. Enter the WEP / WPA key of the selected wireless network
[Î / ï / Í / Æ]
Password
Done
Password is case-sensitive
on the software keyboard, then select “Done”, then press
Network List
ABCDE
Connect Cancel
p
ABCDEWiFi
12345
abcde
67890WiFi
fghij
*************
WiFi
1234567890
q
asdfghjkl ;
zx
Space
WiFi
y
uo
wer
i
t
Press OK to open keyboard
cvbnm,. /
WiFi
-=\[]'`
[OK].
using
• The software keyboard shows up by pressing [OK] on the remote in the password input field.
• When inputting a single character using the software keyboard as soon as you press [OK] on the remote to
input that character, then the character is displayed for a very short time to allow you to confirm that this was
the correct character.
Continued on next page.
EN-19
• If you do not know the WEP / WPA key for your wireless network, ask your ISP or the person who set up
your wireless network.
5. Use [Î / ï / Í / Æ] to select “Connect”, then press [OK].
Network List
ABCDE
Password
*************
Password is case-sensitive
WiFi
WiFi
Press OK to open keyboard
WiFi
Connect Cancel
ABCDEWiFi
12345
abcde
67890WiFi
fghij
6. If a connection succeeded, press [OK] to finish the setting, then press [RETURN] to exit.
D Note
• When entering characters from the screen keyboard, look at the screen immediately after pressing the key to
select the character. For a very short time the character you selected is displayed before the dot replaces the
character for security reasons.
• The internal wireless LAN supports following specifications.
- Wireless standards : IEEE 802.11 b/g/n
- Frequency spectrum : 2.4 GHz
- Security protocol : WEP / WPA / WPA2
Manual (Wireless)
Set up the connection to the wireless router manually by entering the wireless network name (SSID).
In the following cases, select “Manual”(wireless) to perform each setting as necessary.
- When a connection test failed with the setting of “Network List”(wireless)
1. Use [Í / Æ] to select “Network Setup” in the home menu, then press [OK].
2. Use [Î / ï]
to select “Manual”, then press
3. SSID (wireless network name) entry screen will appear. Enter the SSID using [Î / ï / Í / Æ] on the software
keyboard, then select “Done”, then press [OK].
• The software keyboard shows up by pressing [OK] on the remote in the SSID input field.
• When inputting a single character using the software keyboard as soon as you press [OK] on the remote to
input that character, then the character is displayed for a very short time to allow you to confirm that this was
the correct character.
4. “Password” entry screen will appear. Enter the WEP / WPA key of the selected wireless network using
[Î / ï / Í / Æ] on the software keyboard, then select “Done”, then press [OK].
[OK]
.
EN-20
Name
Password
*************
Done
1234567890
y
wer
q
t
asdfghjkl ;
Password is case-sensitive.
zx
cvbnm,. /
Space
-=\[]'`
Manual
ABCDE
Connect Cancel
p
uo
i
Press OK to open keyboard
Continued on next page.
5. Use
P
[Î / ï / Í / Æ]
to select “Connect”, then press [OK].
6. If a connection succeeded, press [OK] to finish the setting, then press [RETURN] to exit.
• If you do not know the password (WEP / WPA / WPA2 key) for your wireless network, ask your ISP or the
person who set up your wireless network.
Easy Connect
You can set up the wireless connection quickly.
• “Easy Connect (WPS)” (Wi-Fi Protected Setup) is only available when your router supports it. For details, please
refer to the user manual of your wireless router.
Push Button Method
Please confirm your wireless router has a PBC (Push Button Configuration) button. If the router does not have it,
please perform the “Network List” setup.
1. Use [Í / Æ] to select “Network Setup” in the home menu, then press [OK].
[OK]
2. Use [Î / ï ] to select “Easy Connect (WPS)”, then press
3. Push the PBC button on your wireless router before the progress bar reaches the end.
.
EN
Easy Connect (WPS)
Please press the PBC button on your router now.
SSID
Cancel
• In case the procedure failed, press [OK] to return to the previous screen, then try again.
4. If a connection succeeded, press [OK] to finish the setting, then press [RETURN] to exit.
PIN Code Method (Netbox PIN)
1. Follow steps 1 to 3 in “Network List (Wireless)” on page 19.
[OK]
2. Use [Î / ï / Í / Æ] to select “WPS PIN”, then press
3. Use [Í / Æ] to select “Netbox PIN”, then press
[OK].
4. Set up your wireless router with the PIN code shown on your TV screen before the progress bar reaches the end.
• For details about how to set up your wireless router, please refer to your router manual.
[OK]
5. “OK” will appear, then press
.
6. Press [RETURN] to exit.
.
• In case the procedure failed, press [OK] to return to the previous screen, then try again.
PIN Code Method (Router PIN)
1. Follow steps 1 to 3 in “Network List (Wireless)” on page 19.
2. Use [Î / ï / Í / Æ] to select “WPS PIN”, then press
3. Use [Í / Æ] to select “Router PIN”, then press
[OK].
[OK]
.
Continued on next page.
EN-21
4. Enter the router PIN that you obtained from your router into the router PIN field using [Î / ï / Í / Æ] on the
software keyboard.
• Please refer to your router’s user manual to learn where to find the router PIN.
5. Use [Î / ï / Í / Æ] to select “OK”, then press
6. Press [RETURN] to exit.
• In case the procedure failed, press [OK] to return to the previous screen, then try again.
[OK].
8.2 fun-Link (HDMI CEC)
[HOME]
fun-Link (HDMI CEC) allows integrated system control over HDMI and is part of the HDMI standard. This function
may not work properly depending on the device connected to the unit. When “fun-Link (HDMI CEC)” setting is
set to “On”, the following functions will be available.
ɶ One Touch Play
fun-Link (HDMI CEC) operations are performed using remote control buttons. The TV will automatically be turned
On and switched to the appropriate input source signal.
Buttons for one touch play:
• [Æ (play)]
ɶ One Touch Standby
Ȼ
“Settings”
“System”
Ȼ
“fun-Link (HDMI CEC)”
Ȼ
When the connected fun-Link (HDMI CEC) compatible display device is turned Off first and then this unit will be
turned Off.
ɶ System Information
Get & Set Menu Language
The unit recognizes the OSD language set on the TV and automatically sets the same language as the player menu
language (OSD menu language) for this unit. Refer to the “Language” on page 16 for available languages.
8.3 HDMI Video Resolution
[HOME]
Set the resolution of the video signal being output from the HDMI OUT jack.
You can select the desired “Video Resolution” among the settings listed below.
Actual Output Resolution:
Setting in the
“ Video Resolution”
HDMI Auto
“Settings”
Ȼ
“Video Out”
Ȼ
“Video Resolution”
Ȼ
HDMI Video Output Resolution
The highest resolution that your display device
supports will automatically be in effect.
EN-22
1080p 1080p/60
1080i 1080i
720p 720p
480p 480p
480i 480i
Continued on next page.
D Note
• Composite video output (VIDEO) jack can only output 480i/60.
• If you wish to have HDMI output and composite video output simultaneously, set the “Video Resolution” to
“480i”.
• When connected to a TV which supports up to 1080i, this unit does not output 1080p contents. (“1080p” will
not appear if the TV does not support it.)
• When connected to a TV which supports up to 720p, this unit does not output 1080p or 1080i contents.
(“1080p” or “1080i” will not appear if the TV does not support it.)
• The selected resolution must also be supported by your display device.
• Refer also to your TV’s manual.
• When connected to an HDCP incompatible display device, the picture will not be displayed properly.
• The audio signals from the HDMI OUT jack (including the sampling frequency, the number of channels and bit
length) may be limited by the connected device.
• Among the display devices that support HDMI, some do not support audio output (for example, projectors).
• When this unit’s HDMI OUT jack is connected to a DVI-D compatible display device(s) (HDCP compatible)
with an HDMI-DVI converter cable, the signals are output in digital RGB.
Copyright protection system
To play back digital video images via an HDMI connection, it is necessary that both the player and the display
device (or an AV receiver / amplifier) support a copyright protection system called HDCP (high-bandwidth
digital content protection system). HDCP is copy protection technology that comprises data encryption and
authentication of the connected AV device. This unit supports HDCP. Please read the operating instructions of
your display device (or an AV receiver / amplifier) for more information.
EN
Important copyright information
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.
This item incorporates copy protection technology that is protected by U.S. patents and other intellectual
property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
8.4 Software Update
[HOME]
D Note
• Software update will not change any of the current settings.
• The version of Netflix will also be updated if a newer version of Netflix is available when updating the software.
“Settings”Ȼ“System”
Ȼ
“Network Update”
Ȼ
Continued on next page.
EN-23
ɶ Network Update
1. Use [Í / Æ] to select “Settings” in the home menu, then press [OK].
2. Use [Î / ï] to select “System”, then press [OK].
3. Use [Î / ï] to select “Network Update”, then press [OK].
If a newer software is available, the software update screen will appear. Press [OK].
There is a firmware update available which provides the following updates.
It is recommended that you update the player firmware to this new version.
Press OK to update.
Press CANCEL to exit with no update.
Current Version : X.XX.XX
Latest Version : X.XX.XX
Network upgrade for Magnavox TB600MG2F
OK Cancel
• After a software update is completed, this unit automatically restarts. Please confirm the update result, then
press [OK].
C Caution
• Please do not unplug the AC adapter, LAN cable or press [. (Standby/on)] to set the unit into Standby mode
while executing “Network Update”.
D Note
• In order to update the software via the Internet, you must connect the unit to the Internet and perform the
necessary setup.
• For the network connection, refer to “Connection to the Network” on page 11.
• For the network setup, refer to “Network Connection” on page 17.
• Software update will not change any of the current settings.
• The software version of the network services will also be updated if a newer version is available when updating
the software.
8.5 Initialize
[HOME]
Menus to reset player settings and deactivate network services.
1. Use [Í / Æ] to select “Settings” in the home menu, then press [OK].
2. Use [Î / ï] to select “System”, then press [OK].
3. Use [Î / ï] to select “Initialize”, then press [OK].
4. Use [Î / ï] to select the desired item, then press [OK].
“Settings”
Ȼ
Ȼ
“System”
Ȼ
“Initialize”
5. Use [Í / Æ] to select “OK”, then press [OK].
6. Press [HOME] to exit.
EN-24
9. TROUBLESHOOTING
Problem Tip
No power. Check if the AC adapter is properly connected.
Unplug the AC adapter once, and wait for 5-10 seconds and then plug it in
again.
No sound or picture. Check if the connected TV is turned On.
Check if the connections are made securely and correctly.
Check whether the connected TV or other device supports HDCP. (This
unit will not output a video signal unless the other device supports HDCP.)
Check whether the output format of this unit (HDMI FORMAT) matches
the supported input format of the other connected device.
EN
No audio / video signal on the
display device via HDMI cable.
No audio signal from the
loudspeakers of the TV screen.
No audio signal from the
loudspeakers of the audio system.
Distorted picture. Sometimes a small amount of picture distortion may appear. This is not a
If the unit is connected to an unauthorized display device with an HDMI
cable, the audio / video signal may not be output.
Perform an HDMI cable hotplug, by disconnecting the HDMI cable from the
TV and this unit. Then reconnect the HDMI cable to both devices while
they are powered On.
Ensure that your HDMI cable is certified.
Assign the audio input to the TV to the corresponding video input.
Make sure the HDMI cable is not plugged into the HDMI-DVI jack on the TV
when using an HDMI signal that has both digital HD video and digital audio
signal sources.
Ensure that the TV's speakers are turned On in the TV menu.
Turn On the audio system.
Set the audio system to the correct external audio input.
Increase the volume level of the audio system.
malfunction.
Connect this unit directly to the TV. If the audio / video cables are
connected to a VCR, pictures may be distorted due to the VCR copyright
protection system.
No sound or distorted sound. Adjust the volume.
Check if speakers are connected correctly.
Check the HDMI connections.
Make sure the HDMI cable is not plugged into the HDMI-DVI jack on the TV
when using an HDMI signal that has both digital HD video and digital audio
signal sources.
Check the settings in “Audio Out” menu.
Continued on next page.
EN-25
Problem Tip
The unit does not respond to the
remote control.
in the upper right hand corner
of the TV screen.
The unit stops responding. To completely reset the unit, unplug the AC adapter for 30 seconds.
Cannot connect to the network. Check to see if there is power on the modem / router.
Aim the remote control directly at infrared sensor window on the front or
the top panel. (Refer to page 7)
Reduce the distance to infrared sensor window.
Check the +/– polarity of the batteries and replace both batteries in the
remote control if required.
Go to “IR Signal Check” on page 31.
To check remote operation, aim the remote at the unit then press any arrow
button. The Standby/on Indicator on the unit will turn Off when the button
is pressed and turn On again when the button is released. This confirms that
the unit is receiving the IR remote signal.
The current operation is not possible.
Confirm, if the Internet light is showing activity (light blinking) on the modem
/ router.
Check network settings on the unit.
Power cycle the modem’s and/or router’s AC plug from its AC outlet for 30
seconds and then plug it back in, then try reconnecting cords. If you have
a telephone / Internet modem with your cable service then you may have
to use its reset button or remove the backup battery to reset this type of
modem. Now wait for the lights to show activity and try reconnecting.
Check the cables connected the router.
Turn on the DHCP function on the router.
Cannot use the wireless connection. Once you have activated the wireless connection please wait 30 seconds for
the connection to be established after turning On the unit. After this time
you can try to access network features.
Cannot connect to the network while
my PC is connected to the network.
Cannot use the Netflix feature. Netflix is only available in the United States.
Cannot add movies or TV episodes
to the instant Queue.
Even though the speed of the
Internet connection improves during
playback, the picture quality of
streaming movie does not improve.
The picture quality of a streaming
movie is poor.
Check the content of your Internet service contract to see if your Internet
Service Provider prevents multiple terminals connecting at the same time.
Check if the network connection is made properly.
Visit netflix.com/magnavox on your PC and become a Netflix member.
Visit netflix.com on your PC.
Adding movies or TV episodes may only be done on the PC, not using this unit.
The picture quality does not change during playback.
The picture quality differs depending on the speed of Internet connection at
the time the streaming video is loading.
Check the speed of your Internet connection.
Contact your Internet service provider.
(You may need to improve the broadband speed.)
EN-26
Continued on next page.
Problem Tip
Streaming movies often stop or
start buffering during playback.
Cannot use the Film Fresh /
Blockbuster feature.
Contact your Internet service provider.
(You may need to improve the broadband speed.)
Film Fresh / Blockbuster is only available in the United States.
Check if the network connection is made properly.
Visit filmfresh.roxionow.com/Login (Film Fresh) or
www.blockbuster.com/auth/login (Blockbuster) on your PC and create an account.
Cannot use the VUDU service. VUDU is only available in the United States.
Check if the network connection is made properly.
Visit www.vudu.com/product_overview.html on your PC and create an
account.
Cannot rent or buy movies / TV
shows on VUDU.
The picture quality of VUDU movie
is poor.
VUDU movie often stops or starts
buffering during playback.
You need to activate the VUDU account.
Log into your account at https://my.vudu.com and check your payment information.
Check the speed of your Internet connection. You need speeds of at least
9 Mbps to this player for high quality uninterrupted playback.
Contact your Internet service provider to troubleshoot your Internet
connection for speed and line quality. Consistent line quality and speed are
very important for Internet video playback.
®
Cannot use the Pandora
feature. Pandora is only available in the United States.
EN
Check if the network connection is made properly.
You must create a Pandora account and activate this unit. (See page 14)
Cannot use the Picasa feature. Check if the network connection is made properly.
You must have a Picasa account. If not, create an account on your computer.
(See page 14)
D Note
• Do not attempt to repair this unit yourself. This may cause severe injury, irreparable damage to your HD
Streaming Player and void your warranty.
• Please have available your HD Streaming Player’s model and serial number before contacting us. These numbers
are available on the cabinet as well as on the packaging.
EN-27
10. SPECIFICATIONS
General
Signal system NTSC Color
AC adapter power source AC 100 - 240V, 50 / 60 Hz
Power requirements 6.5V DC
Power consumption 6.5 W (Standby: 1.0 W)
Dimensions (width x depth x height) 4.5 x 4.7 x 1.2 inches (114.1 x 118.0 x 29.5 mm)
Weight 0.42 lb. (0.19 kg)
Operating temperature 41°F (5°C) to 104°F (40°C)
Operating humidity Less than 80 % (no condensation)
Terminals
DC input 6.5 V, 1000 mA
Audio output (Analog) (RCA jack x 2) L/R: 2 Vrms (output impedance: more than 1kƙ)
Video output (RCA jack x 1) 1 Vp-p (75ƙ)
HDMI output (HDMI OUT jack x 1) Digital Video: 480i, 480p, 720p, 1080i, 1080p
Digital Audio
LAN terminal 10BASE-T / 100BASE-TX
Wireless LAN (Internal) IEEE 802.11 b/g/n
D Note
• The specifications and design of this product are subject to change without notice.
EN-28
11. NETWORK SERVICE DISCLAIMER
Content and services made available through this product are transmitted by third parties by means of networks and
transmission facilities over which Company has no control and third party services may be terminated or interrupted at
any time, and Company makes no representation or warranty that any content or service will remain available for any
period of time. Without limiting the generality of this disclaimer, Company expressly disclaims any responsibility for any
interruption or suspension of any content or service made available through this product. Company is not responsible
for customer service related to the content and services. Any question or request for service relating to the content or
services should be made directly to the respective content and service providers.
THIRD PARTY CONTENT AND SERVICES MADE AVAILABLE THROUGH THIS PRODUCT ARE PROVIDED
“AS IS.” COMPANY DOES NOT WARRANT CONTENT OR SERVICES SO PROVIDED, FOR ANY PURPOSE
WHATSOEVER. COMPANY EXPRESSLY DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED INCLUDING
WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
ACCURACY, VALIDITY, TIMELINESS, LEGALITY, SUITABILITY, OR QUALITY OF ANY CONTENT OR SERVICE
MADE AVAILABLE THROUGH THIS PRODUCT.
IN NO EVENT SHALL COMPANY BE LIABLE FOR, ANY DAMAGES, WHETHER ARISING IN CONTRACT
OR TORT, INCLUDING WITHOUT LIMITATION, ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES, LOST PROFITS, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES
ARISING OUT OF, OR IN CONNECTION WITH, ANY CONTENT (OR ANY INFORMATION CONTAINED
THEREIN) OR SERVICE PROVIDED TO THE USER OR ANY THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES.
EN
All content and services accessible through this product belong to third parties and are protected by copyright, patent,
trademark and/or other intellectual property rights. Such content and services are provided solely for the User’s
personal noncommercial use. User may not use any content or services in a manner that has not been authorized by
the content owner or service provider. Without limiting the foregoing, unless expressly authorized by the applicable
content owner or service provider, you may not modify, copy, republish, upload, post, transmit, translate, sell, create
derivative works, exploit, or distribute in any manner or medium any content or services made available through this
product.
EN-29
12. SAFETY INSTRUCTIONS
ɶ To Avoid the Hazards of Electrical Shock and Fire
• Do not handle the AC adapter with wet hands.
• Do not pull on the AC adapter when disconnecting it from an AC outlet. Grasp it by the AC adapter case to
unplug it.
• Do not put your fingers or objects into the unit.
ɶ Location and Handling
• Do not install the unit in direct sunlight, near strong magnetic fields, in a place subject to dust or strong vibration
or on the wall behind the TV.
• To prevent injury, this unit must be securely attached to a wall in accordance with the installation instructions.
• Avoid a place with drastic temperature changes.
• Install the unit in a vertical (w/ mounting bracket included) or horizontal and stable position. Do not place
anything directly on top or bottom of the unit.
• Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.
• Be sure to unplug the AC adapter from the outlet before carrying the unit.
ɶ Note about Recycling
• This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
• Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations
concerning chemical wastes.
• For product recycling information, please visit www.magnavox.com, click on
on the home page.
ɶ Notice for Progressive Scan Output
• Consumers should note that not all high definition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of picture problems with 480 progressive scan output, it is
recommended that the user switch the connection to the ‘standard definition’ output.
EN-30
13. MAINTENANCE
ɶ Servicing
• Please refer to relevant topics on “TROUBLESHOOTING” on page 25 before returning the product.
• If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable
parts inside. Place the unit into the Standby mode, unplug the AC adapter, and please visit
www.magnavox.com/support for Online Support or contact Customer Service 1-800-605-8610.
ɶ Cleaning the Cabinet
• Wipe exterior surfaces of the unit with a soft cloth.
• Never use a solvent, thinner, benzene or alcohol to clean the unit. Do not spray insecticide liquid near the unit.
Such chemicals may discolor the surface or damage the unit.
ɶ IR Signal Check
• If the remote control is not working properly, you can use a digital camera (including a cellular phone with builtin camera) to see if it is sending out an infrared signal. See next.
With a digital camera (including built-in cell phone cameras):
Point a digital camera towards the remote control. Push any button on the remote control and look
through the digital camera. If the infrared light appears through the camera, the remote control is
working.
EN
Or
To check remote operation, aim the remote at the unit then press any arrow button. The Standby/on Indicator
on the unit will turn Off when the button is pressed and turn On again when the button is released. This
confirms that the unit is receiving the IR remote signal.
14. SUPPLIED ACCESSORIES
• AC adapter
• Remote Control (NB930UD)
• Batteries (AAA, 1.5 V × 2)
• Audio / video cables
• SETUP MANUAL
• Wall mount bracket
• Wall mount screws
• VUDU sheet
C Caution
• Do not use adapters other than the supplied AC adapter for this unit.
• Do not use the supplied AC adapter with any other device.
We are not responsible for any damages or injury caused by your misuse described above.
EN-31
15. INSTALLING ON A WALL OR SHELF
Screw clockwise to fasten.
ɶ Installing on a wall
Be sure to attach the wall-mount bracket securely to a wall. You
may find it helpful to drill pilot holes into the mounting surface.
Pilot holes should be slightly smaller than the body of the screws
for a good hold.
Position the unit so the wall-mount slots in the back of the unit line
up with the two projecting tabs of the wall-mount bracket. Place
the wall-mount slots over the two projecting tabs on the wallmount bracket, then slide the unit down until the projecting tabs fit
firmly into the wall-mount slots on the unit.
* Do not place this unit behind the TV as this will block the unit’s
IR receiver.
ɶ Installing on a shelf
This unit should not be placed in a book case, cabinet or a closed
off space unless it has proper ventilation. Make sure to leave space
of 3.9 inches (10 cm) or more as displayed.
Wall
3.9in(10cm)ormore
MAGNAVOX is a registered trademark of Philips Electronics North America Corporation and is used by Funai
Electric Co. Ltd. and Funai Corporation, Inc. under license from Philips Electronics North America.
© 2011 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed,
downloaded or stored in any storage medium, in any form or for any purpose without the express prior written
consent of Funai.
Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the content
herein without the obligation to notify any person or organization of such changes.
All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained
in this manual should be construed as granting, by implication or otherwise, any license or right to use any of the
trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited.
Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.
EN-32
16. TRADEMARK INFORMATION
Netflix and the Netflix logo are trademarks or
registered trademarks of Netflix, Inc.
http://www.netflix.com/HowItWorks
Film Fresh and the Film Fresh logo are registered
trademarks of Film Fresh Inc.
http://filmfresh.roxionow.com/
BLOCKBUSTER name, design and related marks are
trademarks of Blockbuster Inc.
http://www.blockbuster.com
VUDU™ is a trademark of VUDU, Inc.
http://www.vudu.com/product_overview.html
PANDORA, the PANDORA logo, and the Pandora
trade dress are trademarks or registered trademarks of
Pandora Media, Inc. Used with permission.
http://www.pandora.com
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
EN
HDMI, the HDMI Logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other
countries.
The Wi-Fi CERTIFIED Logo is a certification mark of
the Wi-Fi Alliance.
Adobe, Flash, and the Flash logo are either registered
trademarks or trademarks of Adobe Systems Incorporated
in the United States and/or other countries.
®
®
Powered by Adobe
Contains Adobe® Flash® Lite® technology by Adobe Systems
Incorporated. This HD Streaming Player (TB600MG2F)
contains Adobe
Adobe Systems Incorporated, Copyright © 1995-2011 Adobe
Macromedia Software LLC. All rights reserved. Adobe, Flash
and Lite are trademarks of Adobe Systems Incorporated.
Flash
®
Flash® Lite® software under license from
EN-33
17. GLOSSARY
AAC
Advanced Audio Coding (AAC) is a lossy compression
and encoding scheme for digital audio. Audio files that
have been encoded with AAC generally achieves better
sound quality than MP3 at similar bit rates.
Analog Audio
An electrical signal that directly represents sound.
Compare this to digital audio which can be an electrical
signal, but is an indirect representation of sound. See
also “Digital Audio”.
HDMI (High-Definition Multimedia Interface)
A digital interface between audio and video source. It
can transmit component video, audio, and control signal
with one cable connection.
Hub
A device used for connecting multiple devices to the
network.
IP Address
A set of numbers which are assigned to devices
participating in a computer network.
LAN (Local Area Network)
Aspect Ratio
The width of a TV screen relative to its height.
Conventional TVs are 4:3 (in other words, the TV screen
is almost square); widescreen models are 16:9 (the TV
screen is almost twice as wide as its height).
Blockbuster
Blockbuster is online service which you can rent or
purchase movies and TV episodes streamed over the
Internet. Blockbuster is only available in the United States.
Digital Audio
An indirect representation of sound by numbers.
During recording, the sound is measured at discrete
intervals (44,100 times a second for CD audio) by
an analog-to-digital converter, generating a stream of
numbers. On playback, a digital-to-analog converter
generates an analog signal based on these numbers.
See also “Sampling Frequency” and “Analog Audio”.
DNS Server
A server which translates Internet domain names into IP addresses.
Dolby Digital Plus
Dolby Digital Plus is the next generation digital audio
compression technology developed as an extension to
Dolby Digital.
Film Fresh
Film Fresh is online service which you can rent or
purchase movies and TV episodes streamed over the
Internet. Film Fresh is only available in the United States.
Gateway
IP address of the electronic devices (such as router)
which provide Internet access.
A group of computer networks covering a small area
like a company, school or home.
Netflix
Netflix is online movie rental service, offering online
streaming to customers in the United States.
Pandora
Pandora is a popular personalized Internet radio
service. You can instantly listen to free personalized
radio stations streamed over the Internet from Pandora.
Pandora is only available in the United States.
®
PCM (Pulse Code Modulation)
The most common system of encoding digital audio,
found on CD and DAT. Excellent quality, but requires a
lot of data compared to formats such as Dolby Digital
and MPEG audio.
Picasa
Picasa allows you to create your original web-based
albums and organize your digital photographs and
images in chronological order.
Router
A networking device which distinguishes the IP address
assigned to each device and routing and forwarding
information in the computer network.
Sampling Frequency
The rate which sound is measured by a specified
interval to turn into digital audio data. The numbers
of sampling in one second defines as the sampling
frequency. The higher the rate, the better the sound
quality.
EN-34
Continued on next page.
Subnet Mask
A mask which is used to determine what subnet an IP
address belongs to.
VUDU
VUDU is a leading HD on-demand video service which
utilizes the Internet connection to deliver the highest
quality on-demand video and Internet applications.
16:9 Pillarbox
When a 4:3 formatted picture is shown on a 16:9
screen, the complete 4:3 picture is displayed while
adding black bars on each side of the screen to hide the
blank screen area.
EN
EN-35
18. ESPAÑOL
18.1 Mando a Distancia
1
2
3
4
5
6
7*
8
9
10
11
12
13
14
15
16
17
6. Botón ¢ (reverso)
Durante la reproducción, púlselo para invertir rápido
la reproducción.
7. Botón
Púlselo para iniciar o reanudar la reproducción.
8. Botón H (saltar)
Durante la reproducción, púlselo una vez para
volver al comienzo del título, capítulo, pista o archivo
actual.
9. Botón Ê (detener)
Púlselo para detener la reproducción.
10. Botón NETFLIX
Pulse para abrir Netflix.
11. Botón DISPLAY
Púlselo para visualizar el menú desplegable en
pantalla.
B (reproducir)*
* También puede encenderse la unidad pulsando este
botón.
1. Botón . (Espera/encender)
Pulse el botón para encender la unidad, o para
pasar la unidad al modo de espera. (Para apagar
completamente la unidad, debe desconectar el
adaptador de CA.)
2. Botón HOME
Púlselo para mostrar el menú de inicio.
3. Botón OPTION
Si se encuentra un nuevo software al establecer
“Auto comprobación de actualización” en “Enc.”,
aparecerá el aviso de actualizaciones en la pantalla
del menú inicial. Pulse este botón para iniciar la
actualización.
12. Botón OK
Púlselo para confirmar o seleccionar elementos de
menú.
13. Botón RETURN
Púlselo para volver a la pantalla de funciones o
menú mostrado anteriormente.
14. Botón ∫ (adelantar)
Durante la reproducción, púlselo para avanzar
rápido la reproducción.
15. Botón G (saltar)
Durante la reproducción, púlselo para saltar al
siguiente título.
16. Botón Δ (pausar)
Púlselo para pausar la reproducción.
17. Botón VUDU
Pulse para abrir VUDU.
4. Botones de Î / ï / Í / Æ
Púlselos para seleccionar elementos o
configuraciones.
5. Botón NET APP
Púlselo para visualizar el menú de aplicación de la
red.
ES-36
D Nota
• Cuando la unidad reciba una señal del mando a
distancia, parpadeará el indicador de en Espera/
encender del panel superior.
18.2 Encontrar la Entrada de Fuente de Video en su TV
Después de haber conectado la unidad a su televisor, ya sea con un cable HDMI o de vídeo y los cables de audio,
encuentra la fuente de visualización (fuente de entrada externa) en su televisor.
1. Encienda el televisor.
2. Pulse el botón del control remoto del televisor que tiene acceso a la fuente de entrada externa. Puede ser
etiquetado como “SOURCE”, “AV”, “AUX” o “INPUT” (consulte el manual del usuario del televisor).
3. Conecte el adaptador de CA para esta unidad a la unidad (Toma DC IN) y luego en una toma de CA.
Please Wait...
Esta es la fuente correcta de visualización (fuente de entrada externa).
• Si la TV está conectada con un cable HDMI puede que tarde un poco en aparecer la imagen de saludo.
ES
• La pantalla “Please Wait...” solo aparece cuando la unidad está conectada a una TV con un cable HDMI.
18.3 Instalación Inicial
Por favor, siga las instrucciones que se exponen a continuación para completar la configuración inicial.
1. Utilice [Í / Æ] mientras se presenta la pantalla de bienvenida para seleccionar “Next” y pulse luego [OK].
2. Aparecerá la pantalla de configuración de idioma. Utilice [Î / ï] para seleccionar el idioma, a continuación, pulse
[OK]. Después de esto, utilice [Î / ï / Í / Æ] para seleccionar “Next”, y luego pulse [OK].
Please select your language for on-screen display.
3. Aparecerá la pantalla “Auto comprobación de actualización”. Utilice [Í / Æ] para seleccionar el modo deseado y
pulse [OK]. Después de esto, utilice [Î / ï / Í / Æ] para seleccionar “Next” y luego presione [OK].
[Language]
English
Français
Español
ReturnNext
• Aparecerá la pantalla de configuración de red. Con el fin de proceder a la configuración de la red, consulte
“Network Connection” en la página 17.
• Esta unidad detecta automáticamente si un cable de LAN está conectado a ella.
- Si un cable de LAN está conectado a esta unidad, aparecerá la pantalla “Con conexión de cable”.
- Si un cable de LAN no está conectado a esta unidad, aparecerá la pantalla “Inalámbrico”.
ES-37
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or
workmanship as follows:
DURATION:
PART S: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the
date of original retail purchase. Certain parts are excluded from this warranty.
LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of
original retail purchase.
Note: Any product sold and identified as refurbished or renewed carries a ninety (90) days labor
and parts limited warranty.
LIMITS AND EXCLUSIONS:
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT
OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE
PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing
or if service was attempted by an unauthorized service center. This limited warranty does not apply to any
product not purchased and used in the United States.
This warranty only covers failures due to defects in material or workmanship which occur during normal use. It
does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or products
not supplied by FUNAI CORP., or damage, which results from accident, misuse, abuse, mishandling, misapplication,
alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this
product, or damage which results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE
CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE
USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER
WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER.
THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO
PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIR COSTS WILL
BE CHARGED.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT
VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO
OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:
To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original
packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI
CORP. will not reimburse you for any service done by unauthorized service providers without prior written approval.
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please
contact us at:
FUNAI SERVICE CORPORATION
Tel: 1-800-605-8610
www.magnavox.com/support
2200 Spiegel Drive, Groveport, OH 43125
X6060UD
★★★★
Loading...