Magnavox TB100MW9A User Manual

Download

TB100MW9A

DTV Digital to Analog Converter (Set Top Box)

THANK YOU FOR CHOOSING MAGNAVOX.

NEED HELP FAST?

READ YOUR OWNER'S MANUAL FIRST FOR QUICK TIPS

THAT MAKE USING YOUR MAGNAVOX PRODUCT MORE ENJOYABLE.

IF YOU HAVE READ YOUR INSTRUCTIONS AND STILL NEED ASSISTANCE,

YOU MAY ACCESS OUR ONLINE HELP AT HTTP://WWW.FUNAI-CORP.COM

OR CALL 1-800-605-8610 WHILE WITH YOUR PRODUCT.

INSTRUCCIONES EN ESPAÑOL INCLUIDAS.

Owner's Manual

Products that have earned ENERGY STAR® are designed to protect the environment through superior energy e ciency.

Before Using

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The caution marking is located on the bottom of the cabinet.

Important Safeguards

Read instructions - All the safety and operating instructions

should be read before the appliance is operated.

2. Retain Instructions - The safety and operating

instructions should be retained for future reference.

3. Heed Warnings

the operating instructions should be adhered to.

4. Follow Instructions

instructions should be followed.

5. Cleaning

before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. EXCEPTION: A product that is meant for uninterrupted service and, that for some speci c reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5.

6. Attachments

recommended by this product manufacturer as they may cause hazards.

7. Water and Moisture

water-for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

8. Accessories

unstable cart, stand, tripod, bracket, or table. This product may fall, causing serious injury to someone, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with this product. Any mounting of the appliance should follow the manufacturer’s instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

AMEUBLES

placé que sur un meuble (avec ou sans roulettes) recommandé par le fabricant. Si vous l’installez sur un meuble à roulettes,

All warnings on the appliance and in

All operating and use

Unplug this product from the wall outlet

Do not use attachments not

Do not use this product near

Do not place this product on an

- Cet appareil ne doit être

9. Ventilation

10. Power Sources

11. Grounding or Polarization

12. Power-Cord Protection

13. Outdoor Antenna grounding - If an outside antenna

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

déplacez les deux ensembles avec précaution. Un arrêt brusque, l’utilisation d’une force excessive et des surfaces irrégulières risquent de déstabiliser l’ensemble et de le renverser.

back or bottom are provided for ventilation and to ensure reliable operation of this product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing this product on a bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For this products intended to operate from battery power, or other sources, refer to the operating instructions.

with a polarized alternating-current line plug(a plug having one blade wider than the other). This plug will  t into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to  t, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

or cable system is connected to this product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the leadin wire to an antenna discharge unit, size of grounding

Slots and openings in the cabinet and the

This product should be operated

This product is equipped

Power-supply cords should be

Before Using

EXAMPLE OF ANTENNA GROUNDING AS PER

ELECTRIC SERVI CE

NEC - NATIONAL ELECTRICAL CODE

POWER SERVICE GROUNDING ELECTRODE

SYSTEM (NEC ART 250, PART H)

conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A)

14. Lightning

For added protection for this product receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to this product due to lightning and power-line surges.

15. Power Lines

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

16. Overloading

Do not overload wall outlets and extension cords as this can result in a risk of  re or electric shock.

17. Object and Liquid Entry

Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a  re or electric shock. Never spill liquid of any kind on this product.

18. Servicing

Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to quali ed service personnel.

19. Damage Requiring Service

Unplug this product from the wall outlet and refer servicing to quali ed service personnel under the following conditions:

FIGURE A

NATIONAL ELECTRICAL CODE

GROUND CLAMP

EQUIPM ENT

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAM PS

a. When the power-supply cord or plug is damaged

or frayed.

b. If liquid has been spilled, or objects have fallen into

this product. c. If this product has been exposed to rain or water. d. If this product does not operate normally by

following the operating instructions. Adjust only

those controls that are covered by the operating

instructions, as improper adjustment of other

controls may result in damage and will often

require extensive work by a quali ed technician to

restore this product to its normal operation. e. If this product has been dropped or damaged in

any way. f. When this product exhibits a distinct change in

performance-this indicates a need for service.

20. Replacement Parts

When replacement parts are required, be sure the service technician has used replacement parts speci ed by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in  re, electric shock, injury to persons or other hazards.

21. Safety Check

Upon completion of any service or repairs to this product, ask the service technician to perform routine safety checks to determine that this product is in proper operating condition.

22. Heat

This product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including ampli ers) that produce heat.

The serial number of this product may be found on the bottom of the unit. You should record the number and other vital information here and retain this book as a permanent record. Serial numbers are not kept on  le.

Date of Purchase Dealer Phone No. Dealer Purchase from Model No. Dealer Address Serial No.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY

INSERT.

ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE

LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling unit can cause serious injury or even death.

Before Using

Precautions

Location

For safe operation and satisfactory performance of this product, keep the following in mind when selecting a place for its installation:

•

Shield it from direct sunlight and keep it away from sources of intense heat.

•

Avoid dusty or humid places.

•

Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the product. Do not place the product on a carpet because this will block the ventilation holes.

•

Install the product in a horizontal position.

•

Avoid locations subject to strong vibration. Do not place this product near strong magnetic

•

fields. Avoid moving this product to locations where

•

temperature differences are extreme.

Avoid the Hazards of Electrical Shock and Fire

Do not handle the power cord with wet hands.

•

Do not pull on the power cord when

•

disconnecting it from an AC wall outlet. Grasp it by the plug.

If by accident, water is spilled on your the

•

product, unplug the power cord immediately and take the product to our Authorized Service Center for servicing.

•

Do not place anything directly on top of the product.

Important Copyright Information

Unauthorized recording or use of broadcast television programming, video tape,  lm or other copyrighted material may violate applicable copyright laws. We assume no responsibility for the unauthorized duplication, use or other acts which infringe upon the rights of copyright owners.

FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modi cations to this equipment may cause harmful interference unless the modi cations are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modi cation is made.

A Note about Recycling

This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.

Table of Contents

Before Using

Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Information on Digital Broadcasting . . . . . . . . . . . . . . . 7

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Location of Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Connections

Connecting to a TV without A/V Jacks . . . . . . . . . . . . 10

Connecting to a TV with A/V Jacks . . . . . . . . . . . . . . . . 10

Connecting to a Cable Box (Optional) . . . . . . . . . . . . . 11

Connecting to Other Devices . . . . . . . . . . . . . . . . . . . . . 12

Initial Setup (Setup Wizard)

Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Basic Operation

Selecting Channels on the STB . . . . . . . . . . . . . . . . . . . 15

Advanced Operation

Autoscan (Receiving Channels) . . . . . . . . . . . . . . . . . . . 18

Adding/Deleting Channels . . . . . . . . . . . . . . . . . . . . . . . 18

Adjusting Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Selecting Display Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Setting the Time Zone and D.S.T

(Daylight Saving Time) . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

V-chip Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Closed Caption Options . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Auto Power Down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Others

Speci cations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover

All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes.

with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Before Using

CONNECTION

Connecting to

a TV without A/V jacksa TV without A/V jacks

Conexión a un TV sin tomas de A/V

Connecting to

a TV with A/V jacksa TV with A/V jacks

Conexión a un TV con tomas de A/V

Connecting to

a Cable Boxa Cable Box

Conexión a una caja de cable

Overview

TV with

A/V jacks

TV without

A/V jacks

TV with

A/V jacks

Cable Box

SET TOP BOX

Connecting to

Other DevicesOther Devices

Conexión a otros dispositivos

SETUP WIZARD

1. Language for TV screen

Idioma para la pantalla

2. Connection for audio output

Conexión para salida de audio

3. Time zone

Husos horarios

4. Daylight savings time (D.S.T)

Hora de verano (D.S.T)

5. Display mode

modo de indicaciones

6. Channel scanning

Búsqueda de canales

TV with

A/V jacks

DVD or VCR

SET TOP BOX

Information on Digital Broadcasting

antenna

ATS C

Digital

terrestrial signals

Receives

ATS C

STB (Set Top Box)

converts the ATSC signal

to analog signal

Digital terrestrial

Accessories

Check the following accessories when unpacking the STB:

Remote control: NA386UD (x1)

Owner’s manual: 1VMN25613 (x1)

AA battery (x2) RF cable:

Before Using

This STB makes it possible to view the digital TV programs on your analog TV by converting the digital signal to the analog signal. You can use most features provided by the digital broadcast, except that the resolution of the image is always output in 480i (standard resolution).

WPZ0901TM002 / WPZ0901TM005 (x1)

1 Unsnap the battery cover from the

back of the remote control.

Abra la cubierta de pilas de la parte trasera del mando a distancia.

NOTE:

CAUTION:

Do not mix battery types (alkaline and manganese, or old ones and

•

new ones).

When replacing batteries,

•

replace them in pairs.

Cuando cambie las pilas, hágalo por pares.

No mezcle tipos de baterías (baterías alcalinas y de manganeso, ni pilas viejas con pilas nuevas).

Do not recharge, short-circuit, heat, burn or disassemble batteries.

•

No recargue, caliente, queme o desarme baterías ni provoque un corto circuito con ellas.

Remove batteries from battery compartment that is not going to be

•

used for a month or more.

Quite las pilas del compartimento de pilas si no se va a utilizar durante un mes o más.

Installing Batteries

Instalación de pilas

2 Install two AA batteries making

sure the polarity (+ /

Instale dos pilas AA asegurándose que

la polaridad (+ /

) is correct.

) sea la correcta.

3 Snap the battery

cover back.

Cierre la cubierta de

pilas.

Before Using

Remote Control

Mando a distancia

3 4

Location of Controls

Ubicación del control

1 STANDBY-ON button: Turns STB on and o .

Conecta y desconecta el STB.

2 Number buttons 3 OK button 4 SETUP button: Displays “SETUP” menu.

7 8

9 10

11 12

Switches between ch3 / ch4 by holding this

button down over 3 seconds.

Despliega el menú “AJUSTE”. Puede alternar entre el canal 3 y 4 si mantiene

presionado [SETUP] durante 3 segundos.

5 ALT. CH: Returns to the last selected channel.

Regresa al último canal seleccionado.

6 AUDIO button: Selects alternative audio

languages (if available).

Selecciona idiomas de audio alternativos (si existen).

7 . (Con rm) button: Press to con rm the channel

selection made by [the Number buttons].

Presione para con rmar la selección del canal, hecha

con [los botones de Números].

8 DISPLAY button: Displays the channel banner.

Despliega el banner del canal.

9 RETURN button: Returns to the previous menu

screen.

Regresa a la pantalla de menú anterior.

10 Navigation buttons K / L / s / B 11 EPG button: Displays the Electronic Program

Guide.

Despliega la Guía Electrónica de Programas.

12 CH K / Lbuttons 13 STILL button: Freezes the image on the TV

screen.

Congela la imagen de la pantalla del TV.

To operate this STB with a universal remote, check the instruction manual for remote and find

•

Magnavox brand STB code. If you do not find the code or the code does not work, try to use Sylvania brand STB code instead.

Front Panel

Panel frontal

12 3

1 Remote control sensor 2 POWER indicator:

Turns green when the STB is in operation. Turns yellow on standby.

Se vuelve verde cuando el STB está en operación. Se

vuelve amarilla en el modo en espera.

Before Using

3 Main Power:

Turns STB’s main power on and o .

Conecta y desconecta la fuente de alimentación

principal del STB.

When you use this button to turn o the main power, make sure the Power indicator is yellow.

Cuando utilice este botón para desconectar la fuente de alimentación principal, asegúrese de que el indicador de potencia esté amarillo.

Rear Panel

Panel trasero

1 AC power cord 2 AUDIO OUT jacks (Right-red / Left-white):

Connect your TV, stereo system or VCR etc. with standard audio cables.

Conecte su TV, sistema estéreo o VCR, etc., con cables

de audio estándares.

3 VIDEO OUT jack (yellow):

Connect your TV or VCR etc. with a standard video cable.

Conecte su TV o VCR, etc., con un cable estándar de

video.

21345

4 ANT. IN jack:

Connect an antenna.

Conecte una antena.

5 ANT. OUT jack:

Connect to the ANT. IN jack on your TV.

Conecte a la toma ANT. IN de su TV.

Connections

yel

low

whi

1 Disconnect the AC power cords of the devices from the AC outlet.

Desconecte los cables de alimentación de los aparatos del tomacorriente CA.

2 Disconnect RF coaxial cable from antenna input jack of your TV.

Desconecte el cable coaxial de RF del conector hembra de entrada de antena de su televisor.

3 Make the connections as illustrated below.

Efectúe las conexiones tal como se ilustra a continuación.

4 Plug all AC power cords into AC outlets, then turn all devices on.

Enchufe todos los cables eléctricos de CA en los tomacorrientes de CA y conecte la alimentación de todos los equipos.

Connecting to a TV without A/V Jacks

Conexión a un TV sin tomas de A/V

TV antenna

Antena de TV

STB

Does not send

the analog TV signal.

No envía la señal analógica

Connecting to a TV with A/V Jacks

Conexión a un TV con tomas de A/V

TV antenna

Antena de TV

STB

RF cable (supplied)

cable de RF (se incluye)

yel

low

whi

red

yel

low

NOTE:

If your TV has only one audio jack, connect the AUDIO OUT jack (L) (white) on the STB to the audio input

•

whi

red

Audio cable

cable de audio

Video cable

cable de video

jack on the TV.

Si su TV sólo tiene una toma de audio, conecte la toma AUDIO OUT (L) (blanco) del STB, a la toma de entrada de audio del TV.

Connecting to a Cable Box (Optional)

Cable box (optional)

caja de cable (opcional)

yellow

white

red

yellow

white

red

Conexión a una caja de cable (opcional)

TV antenna

Antena de TV

Connections

STB

white

red

yellow

Video cable

cable de video

yellow

white

red

Audio cable

cable de audio

Cable box (optional)

caja de cable (opcional)

RF cable (supplied)

cable de RF (se incluye)

Cable TV

company

empresa de TV por cable

Incoming cable signals

Señales del cable de entrada

Note to the Cable TV System Installer:

This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper grounding - in particular, specifying that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as possible.

Observación para el instalador del sistema de cable de TV:

Este recordatorio se provee para alertar al instalador del sistema de cable de TV sobre el Artículo 820-40 del Código Eléctrico Nacional, el cual proporciona pautas para una puesta a tierra adecuada, y en particular especi ca que la puesta a tierra del cable debe estar conectada al sistema de puesta a tierra del edi cio, lo más cerca posible del punto de entrada del cable.

Connections

DVD Recorder or VCR

Grabador de DVD o videograbador

yellow

white

red

yellow

white

red

yellow

white

red

Connecting to Other Devices

Conexión a otros dispositivos

TV antenna

Antena de TV

Splitter

Divisor

NOTE:

STB

yellow

white

red

Audio cable

cable de audio

DVD Recorder or VCR

white

red

yellow

Does not send

the analog TV signal.

No envía la señal analógica

If your DVD recorder or VCR has only one audio jack, connect the AUDIO OUT jack (L) (white)

•

DVD Recorder or VCR

Grabador de DVD o videograbador

Audio cable

cable de audio

white

Video cable

cable de video

red

yellow

RF cable

cable de RF

RF cable (supplied)

cable de RF (se incluye)

on the STB to the audio input jack on the DVD.

Si su grabador de DVD o videograbador sólo tiene una toma de audio, conecte la toma AUDIO OUT (L) (blanco) del STB, a la toma de entrada de audio del DVD.

Initial Setup (Setup Wizard)

Initial Setup

Ajùste inicial

1 Switch the STB’s mains power on.

Encienda la alimentación principal del STB.

ON OFF

lights up in yellow

se vuelve amarilla

2 Press [STANDBY-ON] on the remote control to activate the STB.

Presione [STANDBY-ON] en el mando a distancia para activar el STB.

(Setup Wizard)

Initial Setup

lights up in green

se vuelve verde

3 Turn on the TV, and select the viewing channel (ch3 or external input channel) on

your TV. (Refer to your TV’s manual.)

Encienda el TV, y seleccione el canal que quiera ver (canal 3 o uno de entrada externo) en su TV. (Véase el manual del TV.)

CH.

Appropriate Viewing Channel

Con guración apropiada de el Canal de Visión

Connection

Viewing

(p.10)

(p.11)

(p.12)

If your TV’s ch3 is already occupied, select ch4, and set the STB’s output channel to ch4. You can

•

External input channel

Canal de entrada externo

External input channel

Canal de entrada externo

switch ch3 / ch4 by holding [SETUP] down over 3 seconds.

Si el c3 de su TV ya está ocupado, seleccione el c4 y luego ajuste el canal de salida del STB a c4. Puede alternar entre el c3 y 4 manteniendo presionado [SETUP] durante 3 segundos.

STB Cable Box DVD or VCR

“CH3”

Ch3

External input channel

Canal de entrada externo

”SETUP WIZARD” screen automatically appears. Follow the directions shown on the TV screen to set the each setting.

Initial Setup (Setup Wizard)

4 Select “CONTINUE” using [ s / B ],

then press [OK].

Seleccione “CONTINÚE” utilizando [s / B] y presione [OK].

This SETUP WIZARD will help you with the initial setup on your own.

“CONTINUE”: “CANCEL

To continue setup To cancel to leave pre-arranged

”:

setup

CANCEL

CONTINUE

5 Select the language using [ K / L ],

then press [OK].

Seleccione el idioma utilizando [K / L] y presione [OK ].

Select the language for setup display.

ENGLISH

ESPAÑOL

Elija idioma de preparación.

FRANÇAIS

Sélectionner langue écran config.

6 Select the connection for audio

output using [ s / B ], then press [OK].

Seleccione la conexión para salida de audio mediante [s / B] y luego presione [OK].

Select the connection for Audio output.

AUDIO OUT :

Connecting STB and TV via AUDIO Cable

RF OUT

Connecting STB and TV via RF Cable

AUDIO OUT

RF OUT

Select “AUDIO OUT” if...

- you are using the standard audio cable to connect the STB to your TV. (Connection

on pages 10 and 11.)

Seleccione “AUDIO FUERA” si...

- está utilizando el cable de audio normal para

conectar el STB a su TV. (conexión B o C en las páginas 10 y 11.)

Select “RF OUT” if...

- you are using the RF cable to connect the STB to your TV. (Connection

or D on pages 10

and 12.)

Seleccione “RF FUERA” si...

- está utilizando el cable RF para conectar el STB a su

TV. (conexión A o D en las páginas 10 y 12.)

7 Select your time zone using [ K / L ],

then press [OK].

Seleccione su huso horario con [K / L] y presione [OK ].

Select Time Zone.

ATLANTIC

EASTERN

CENTRAL MOUNTAIN PACIFIC ALASKA HAWAII

8 Select “ON” or “OFF” for Daylight

Saving Time (D.S.T) using [ s / B ], then press [OK].

Seleccione “ON” u “OFF” para la hora de verano. (D.S.T) utilizando [s / B] y presione [OK].

Select Daylight Saving Time.

NOTE: 2:00AM of the second Sunday in March until 2:00AM of the first Sunday in November.

OFFON

9 Select the desired display mode

using [ K / L ], then press [OK] (refer to page 20).

Seleccione el modo de indicación deseado utilizando [K / L] y presione [OK].

Select display mode.

LETTERBOX

ZOOM

FULL

10 Select “AUTOSCAN” using [ K / L ],

then press [OK].

Seleccione “AUTOEXPLO.” mediante [K / L] y luego presione [OK].

The system is now scanning.

AUTOSCAN will rescan all channels. This may take a while to complete.

EXIT AUTOSCAN

STB starts receiving available digital channels

•

and stores them in the channel map. When the scanning is complete,

•

“AUTOSCAN COMPLETED” will be indicated. After autoscan is complete, use [CH K / L]

•

to verify whether STB is receiving channels properly.

The “SETUP WIZARD” is now complete.

El “ASISTENTE DE PREP.” ahora ha  nalizado.

To cancel during scanning:

Press [SETUP] or [OK].

Para cancelar durante la exploración: Presione [SETUP] o [OK].

•

If autoscan is canceled, some channels not yet scanned may not be received. We recommend completing autoscan.

•

You can do autoscan and adding / deleting channel later. Refer to page 18.

12% Channel Found

EXIT

Basic Operation

About Sub-channel Broadcasting

Digital broadcasting o ers a service that enables multiple signals, called “sub-channels”, to be sent simultaneously on one main channel by using its high compression technology.

ATSC

18:00

18:30

CH4-1

19:00

CH4-1 (Soccer)

(Soccer)

CH4-2

CH4-1 (Soccer)

(News)

CH4-3

(Tennis)

Selecting Channels on the STB

1 Enter the main channel number.

If the main channel number is 1 digit, press [.] when  nish entering.

2 Enter the sub-channel number.

If the sub-channel number is 1 digit, press [OK] when  nish entering.

E.g., selecting 6.1

E.g., selecting 26.12

Basic Operation

19:30

20:00

CH4-1 (Soccer)

: Can be changed by using [CH K / L].

CH4-2 (News)

NOTE:

If you do not have a particular sub-channel

•

number you want to select, enter the main channel number and then press [OK]. (If the main channel number is 1 digit, you should press [OK] twice.) The STB automatically tunes into the lowest sub-channel for the selected main channel.

•

Press [ALT. CH] to return to the previously viewed channel.

•

“NO SIGNAL” appears after the sub-channel broadcast is over.

Basic Operation

Choosing Audio Language

You can change languages when the channel provides alternate languages.

Press [AUDIO] repeatedly.

ENGLISH 1/4

SPANISH 2/4

FRENCH 3/4

OTHER 4/4

Audio language changes as follows.

•

“OTHER” is indicated when the

•

NOTE:

language is not English, Spanish nor French.

•

For international stations audio language will still be displayed as English.

Picture Still

You can freeze the image on the TV screen.

Press [STILL].

The image on the TV screen will be paused.

To cancel still mode: Press any button except [STANDBY-ON].

The sound output will not be

•

NOTE:

paused. If “no signal” is detected or protected

•

signal is received during still mode, the image remains paused and the sound output will be muted.

•

If the TV is left on STILL for a long period of time, the still image may cause a burn-in effect damaging the TV screen.

Channel Banner

The channel banner provides you with the information on the selected channel.

Press [DISPLAY].

Station name

Information Icons

Program title

CC (Closed Caption):

Indicates that the program being broadcast is available with closed captioning.

LOCK:

Indicates that the current program is blocked according to your V-chip

SMILE ABC-XXX

TV-Y7 FV

ENGLISH 1/2

SIGNAL

RESTRICTED PROGRAM

3.1

Channel number : Audio language

Signal strength :

Indicates the signal strength of the current channel.

Program ratings :

Displays all the available ratings. Active ratings are highlighted in red.

To remove the channel banner: Press [DISPLAY].

Electronic Program Guide (EPG)

Electronic Program Guide (EPG) is the electronic equivalent of a printed TV program guide. You can view a list of programs scheduled for the next few hours up to the next seven days. To display the correct information on “EPG”, “TIME ZONE” and ”D.S.T” must be set correctly.

1 Press [EPG] while watching TV.

Closed Caption :

Indicates that the program being broadcast is available with closed captioning.

Channel number

Indicates that there is a program information available for next or previous program.

Program title

Time segment for the program.

“NOW” icon will be displayed on

the right for the current program.

Program description

EPG

SMILE Prog 2 ABC-XXX

12:00PM-1:00PM

SMILE 2-1 SMILE 2-2 SMILE 2-3

PREV NEXT

3.1

Basic Operation

2 Select the desired program using [ s / B ].

To remove the EPG:

Press [EPG].

“EPG” will be cleared after 5 minutes.

•

For channel numbers with blank description, the broadcasting station may not

NOTE:

•

provide signals for “EPG”. When the program description consists of more than 4 lines, use [ K / L ] to scroll

•

up / down in the list.

Advanced Operation

Autoscan

(Receiving Channels)

Autoscan receives available digital channels and stores them in a channel map.

CAUTION:

If autoscan is skipped, digital channels may not

•

be received correctly.

1 Press [SETUP]. 2 Select “CHANNEL” using [ K / L ],

then press [OK].

3 Select “AUTOSCAN” using [ K / L ],

then press [OK].

CHANNEL

EXIT

ADD/DELETE

CHANNEL

ANTENNA

TIME

AUTOSCAN

DETAIL

INITIAL

To cancel during scanning:

Press [SETUP] or [OK].

NOTE:

If canceled, some channels not yet scanned may

•

not be received. We recommend completing autoscan.

When you want to completely refresh the

•

channel map, delete all the channels, then do the autoscan again. See “Adding/Deleting Channels” on this page for details.

When “NO SIGNAL” appears on the TV screen:

Verify the antenna connection, then scan again. The STB tunes in channel 2-1 and “NO SIGNAL”

appears if the STB could not receive any channels.

Adding/Deleting Channels

Add or delete desired channels in the channel map.

CAUTION:

4 Select “AUTOSCAN” using [ K / L ],

then press [OK].

AUTOSCAN

EXIT

AUTOSCAN will rescan all channels. This may take a while to complete.

CHANNEL

TIME

BACK AUTOSCAN

DETAIL

INITIAL

AUTOSCAN

The system is now scanning.

12% Channel Found

EXIT

STB starts receiving available digital

•

channels and stores them in the channel map.

•

When the scanning is complete, “AUTOSCAN COMPLETED” will be indicated.

After autoscan is complete, use [CH K / L]

•

to verify whether STB is receiving channels properly.

You cannot recover the deleted channels once

•

they are deleted unless you perform the autoscan again.

1 Press [SETUP]. 2 Select “CHANNEL” using [ K / L ],

then press [OK].

SETUP

EXIT

ADD/DELETE

CHANNEL

ANTENNA

TIME

AUTOSCAN

DETAIL

INITIAL

3 Select “ADD/ DELETE” using [ K / L ],

then press [OK].

CHANNEL

EXIT

ADD/DELETE

CHANNEL

ANTENNA

TIME

AUTOSCAN

DETAIL

INITIAL

Add

4 With “ADD” selected, enter the main

channel number you want to add, then press [OK] or wait for a few seconds to  x the number.

If the main channel number is 1 digit, press [0]  rst.

NOTE:

Entering sub-channel number is not required.•

5 Press [OK] again to add the channel

to the channel map.

Delete

4 Select “DELETE” using [ K / L ], then

press [OK].

ADD/DELETE

EXIT

CHANNEL

TIME

DETAIL

INITIAL

ADD

DELETE

10.1

10 20

5 Select the channel number you want

to delete from the channel list on the right using [ K / L ], then press [OK].

E.g., deleting channel 26.

E.g., adding channel 6

ADD/DELETE

EXIT

ADD

CHANNEL

DELETE

TIME

DETAIL

INITIAL

E.g., adding channel 26.

ADD/DELETE

EXIT

ADD

CHANNEL

DELETE

TIME

DETAIL

INITIAL

(or leave for

a few seconds)

6.X

(or leave for

a few seconds)

26.X

ADD/DELETE

EXIT

ADD

CHANNEL

DELETE

TIME

DETAIL

INITIAL

ADD/DELETE

EXIT

ADD

CHANNEL

DELETE

TIME

DETAIL

INITIAL

The selected channel is now deleted.

•

To continue deleting:

Repeat step 5.

6 Press [SETUP] to exit.

26.1

10 20 26 58

58.1

Operation

Advanced

The selected channel is now added.

•

To continue adding:

Repeat steps 4 and 5.

6 Press [SETUP] to exit.

Advanced Operation

Adjusting Antenna

You can verify the signal strength of each channel.

1 Select a channel to adjust using [the

Number buttons] or [CH K / L]. 2 Press [SETUP]. 3 Select “CHANNEL” using [ K / L ],

then press [OK]. 4 Select “ANTENNA” using [ K / L ],

then press [OK].

CHANNEL

EXIT

ADD/DELETE

CHANNEL

ANTENNA

TIME

AUTOSCAN

DETAIL

INITIAL

STB starts receiving the signal for the

•

channel.

5 By referring to the on-screen

indication, adjust the antenna’s

direction to get the best reception.

Status bar:

Stretches to the right as the signal strength gets stronger.

ANTENNA

EXIT

CHANNEL

TIME

DETAIL

INITIAL

WEAK

NOW

BACK

10.1

STRONG

PEAK

Selecting Display Mode

You can adjust the aspect ratio of the digital TV program to  t your 4:3 TV monitor.

Display Mode

1 Press [SETUP]. 2 Select “DETAIL” using [ K / L ], then

press [OK].

SETUP

EXIT

V-CHIP

CHANNEL

CLOSED CAPTION

TIME

DISPLAY MODE

DETAIL

AUTO POWER DOWN

INITIAL

3 Select “DISPLAY MODE” using [ K / L ],

then press [OK].

DETAIL

EXIT

V-CHIP

CHANNEL

CLOSED CAPTION

TIME

DISPLAY MODE

DETAIL

AUTO POWER DOWN

INITIAL

4 Select the desired display mode

using [ K / L ], then press [OK].

Descriptions of each settings are explained

in the “Information on Display Mode” on the next page.

Select display mode.

LETTERBOX

ZOOM

FULL

LETTERBOX

4 HOURS

LETTERBOX

4 HOURS

Peak indicator: Indicates the highest strength ever reached.

To adjust other channels:

Select the channel using [CH K / L], then adjust it.

6 Press [SETUP] to exit.

5 Press [SETUP] to exit.

Information on Display Mode

LETTERBOX

16:9 picture is scaled down until the both sides of the picture  ts the 4:3 TV. Black bars appear on top and bottom of the TV screen.

ZOOM

Displays the 16:9 image with the top and the bottom of the picture  t to the 4:3 TV screen. Both sides of the picture are cut o .

FULL

16:9 image is squeezed into the 4:3 TV screen. No parts are cropped, but the picture gets distorted.

Setting the Time Zone and

D.S.T (Daylight Saving Time)

You need to select the time zone of your area and set D.S.T correctly to make use of the EPG and the Channel banner function.

1 Press [SETUP]. 2 Select “TIME” using [ K / L ], then

press [OK].

Time Zone

3 Select “TIME ZONE” using [ K / L ],

then press [OK].

TIME

CAUTION:

If the TV is left in LETTER BOX mode for a long period of time, the black bars may cause a permanent burnin e ect.

EXIT

CHANNEL

TIME

DETAIL

INITIAL

TIME ZONE

D.S.T

EASTERN

OFF

4 Select your time zone using [ K / L ],

then press [OK].

Select Time Zone.

ATLANTIC

EASTERN

CENTRAL MOUNTAIN PACIFIC ALASKA HAWAII

5 Press [SETUP] to exit.

Operation

Advanced

Advanced Operation

D.S.T (Daylight Saving Time)

3 Select “D.S.T” using [ K / L ], then

press [OK].

TIME

4-a

Enter 4-digit numbers except 4737

as your password using [the Number buttons].

Enter exactly the same password again in

•

“Confirm password.” entry field.

EXIT

CHANNEL

TIME

DETAIL

INITIAL

TIME ZONE

D.S.T

EASTERN

4 Select “ON” or “OFF” using [ s / B ],

then press [OK].

D.S.T

Select Daylight Saving Time.

EXIT

NOTE: 2:00AM of the second Sunday in

CHANNEL

March until 2:00AM of the first Sunday in November.

TIME

DETAIL

INITIAL

OFFON

5 Press [SETUP] to exit.

V-chip Options

V-chip reads the ratings for programs, then denies access to the programs which exceed the rating level you set. With this function, you can block certain programming inappropriate for children.

1 Press [SETUP]. 2 Select “DETAIL” using [ K / L ], then

press [OK]. 3 Select “V-CHIP” using [ K / L ], then

press [OK].

DETAIL

V-CHIP

EXIT

Enter password.

CHANNEL

Confirm password.

TIME

DETAIL

INITIAL

CAUTION:

Do not forget the password. It will be used as

•

your V-chip access password from the next time onward.

4-b

Enter the password using [the

Number buttons].

•

Asterisk(*) will substitute for your password.

****

NOTE:

If you forget the password, enter “4737” then

•

proceed to “New Password” on page 24.

EXIT

V-CHIP

CHANNEL

CLOSED CAPTION

TIME

DISPLAY MODE

DETAIL

AUTO POWER DOWN

INITIAL

Password entry field will appear.

•

LETTERBOX

4 HOURS

If you have not created a password yet...

- proceed to step 4-a.

If you have already set a password...

- proceed to 4-b.

If you want to change the password...

- proceed to “New Password” on page 24.

5 Select the desired rating type using

[ K / L ], then press [OK].

E.g., “TV RATING”

V-CHIP

EXIT

MPAA RATING

CHANNEL

TV RATING CANADIAN ENGLISH RATING

TIME

CANADIAN FRENCH RATING DOWNLOADABLE RATING

DETAIL

CLEAR DOWNLOADABLE RATING NEW PASSWORD

INITIAL

NOTE:

“DOWNLOADABLE RATING” will be available

•

when the STB receives a digital broadcast which contains V-chip 2.0 signal.

•

If the broadcasting signal does not have the downloadable rating information, “Downloadable Rating is currently not available.” will appear. This message will also appear when you try to access “DOWNLOADABLE RATING” after you have cleared the downloadable rating information, and the new information has not been downloaded since.

•

To clear the downloadable rating information and its setting, select “CLEAR DOWNLOADABLE RATING”.

MPAA Rating

Rating Description X Mature audience only higher NC-17 No one under 17 admitted

Restricted; under 17 requires

accompanying parent or adult guardian

PG-13 Unsuitable for children under 13 PG Parental guidance suggested G General audience

lower

NR No rating

TV Rating

Rating Description TV-MA Mature audience only higher

TV-14

Unsuitable for children under 14

TV-PG Parental guidance suggested TV-G General audience

TV-Y7

Appropriate for all children 7 and older

TV-Y Appropriate for all children lower None No rating

Operation

Advanced

6 Select the desired rating using

[ K / L ], then press [OK] repeatedly to switch between view and block.

When the rating is blocked, will appear.

•

E.g., “MPAA rating”

V-CHIP

Select MPAA rating.

EXIT

X NC-17

CHANNEL

R PG-13

TIME

DETAIL

G NR

INITIAL

“Canadian English rating” “Canadian French rating”

V-CHIP

Set Canadian English rating.

EXIT

18+ 14+

CHANNEL

PG G

TIME

C8+

DETAIL

C E

INITIAL

“TV rating”

V-CHIP

Set TV rating.

EXIT

TV-MA

CHANNEL

TV-14 TV-PG

TIME

TV-G TV-Y7

DETAIL

TV-Y None

INITIAL

V-CHIP

Set Canadian French rating.

EXIT

18ans+ 16ans+

CHANNEL

13ans+ 8ans+

TIME

DETAIL

INITIAL

FV V S L D

Advanced Operation

To Set the Sub Ratings for “TV RATING”.

As for TV-MA, TV-14, TV-PG, or TV-Y7, you can further set the sub ratings to block speci c elements of programming. To set the sub ratings, follow the step below.

Use [ K / L / s / B ] to select the desired rating or sub rating, then press [OK] repeatedly to switch between view and block. Sub rating status will appear beside the main rating.

V-CHIP

Set TV rating.

EXIT

CHANNEL

TIME

DETAIL

INITIAL

TV-MA TV-14 TV-PG TV-G TV-Y7 TV-Y None

FV V S L D

Sub Rating Description FV Fantasy Violence V Violence S Sexual Situation L Coarse Language D Suggestive Dialogue

Changing the main rating to block or view

•

automatically changes all its sub ratings to the same (block or view).

Canadian English Rating

Rating Description 18+ Adult audience only higher 14+ Unsuitable for ages under 14 PG Parental guidance suggested G General audience C8+ For children over 8 C For all children

lower

E Exempt program

7 Press [SETUP] to exit.

NOTE:

When you select a rating and set it to block, the

•

higher ratings will be blocked automatically. The lower ratings will be available for viewing.

When you set the highest rating to view, all

•

ratings will turn to view automatically.

New Password

When you forget the password or when you want to change your password, follow the instructions below.

1 Press [SETUP]. 2 Select “DETAIL” using [ K / L ], then

press [OK].

3 Select “V-CHIP” using [ K / L ], then

press [OK].

4 Enter 4737 in the password entry

 eld.

5 Select “NEW PASSWORD” using

[ K / L ], then press [OK].

V-CHIP

EXIT

MPAA RATING

CHANNEL

TV RATING CANADIAN ENGLISH RATING

TIME

CANADIAN FRENCH RATING DOWNLOADABLE RATING

DETAIL

CLEAR DOWNLOADABLE RATING NEW PASSWORD

INITIAL

6 Enter the new 4-digit password

using [the Number buttons].

Enter exactly the same password again in

•

“Confirm password.” entry field.

V-CHIP

Canadian French Rating

Rating Description 18 ans+ Adult audience only higher 16 ans + Unsuitable for ages under 16 13 ans + Unsuitable for ages under 13 8 ans + Unsuitable for ages under 8 G General audience

lower

E Exempt program

EXIT

CHANNEL

TIME

DETAIL

INITIAL

7 Press [SETUP] to exit.

Enter password.

Confirm password.

Closed Caption Options

DTV has its own closed caption called DTV CC. Use this menu to change the settings for DTV CC.

1 Press [SETUP]. 2 Select “DETAIL” using [ K / L ], then

press [OK].

3 Select “CLOSED CAPTION” using

[ K / L ], then press [OK].

DETAIL

EXIT

V-CHIP

CHANNEL

CLOSED CAPTION

TIME

DISPLAY MODE

DETAIL

AUTO POWER DOWN

INITIAL

LETTERBOX

4 HOURS

CC Style

You need to set “CC STYLE” to “MANUAL” to customize your CC style.

5 Select “MANUAL” using [ K / L ],

then press [OK].

CC STYLE

EXIT

CC STYLE will be displayed using

CHANNEL

your manual setting.

TIME

AUTO

MANUAL

DETAIL

INITIAL

If you select “AUTO”...

- the original CC style set by the broadcast station will be applied.

If you select “MANUAL”...

- you can customize the CC style as you like.

4 Select the desired closed caption

item using [ K / L ], then press [OK].

CLOSED CAPTION

EXIT

CHANNEL

TIME

DETAIL

INITIAL

DTV CC

CC STYLE

CC STYLE EDIT

OFF

AUTO

DTV CC

Digital TV has its own closed captions called DTV CC. Use this menu to change the settings for DTV CC.

5 Select the desired DTV closed caption

using [ K / L ], then press [OK].

Select service.

OFF SERVICE1 SERVICE2 SERVICE3 SERVICE4 SERVICE5 SERVICE6

O

DTV CC

Service 1~6

“DTV CC” di ers depending on the broadcast.

Select if you do not want DTV CC. This is the default.

Select one of these before changing any other item in “CLOSED CAPTION” menu. Choose “SERVICE1” under normal circumstances.

CC Style Edit

You can edit the style of CC such as font, color or size, etc. This feature is available only when “CC STYLE” is set to “MANUAL”.

5 Select an item using [ K / L ], then

press [OK]. Then use [ K / L ] to select the desired setting and press [OK].

FONT STYLE FONT SIZE FONT COLOR FONT OPACITY BACK COLOR BACK OPACITY EDGE COLOR EDGE TYPE

Picture display

HI. EVERYONE

Edge

(Edge Color and Edge Type) Font (Font Style, Font Size, Font Color and Font Opacity)

FONT0

SERVICE1

MIDDLE WHITE

SOLID BLACK SOLID BLACK NONE

Back (Back Color and Back Opacity)

6 Press [SETUP] to exit.

Operation

Advanced

Advanced Operation

/ Others

Auto Power Down

“Auto power down” shuts down the STB automatically after a certain period of time you set. (The EPA (U.S. Environmental Protection Agency) recommends using this setting to conserve energy.)

1 Press [SETUP]. 2 Select “DETAIL” using [ K / L ], then

press [OK].

3 Select “AUTO POWER DOWN” using

[ K / L ], then press [OK].

DETAIL

EXIT

V-CHIP

CHANNEL

CLOSED CAPTION

TIME

DISPLAY MODE

DETAIL

AUTO POWER DOWN

INITIAL

4 Select desired amount of time using

[ K / L ], then press [OK].

Select AUTO POWER DOWN time.

OFF

4 HOURS 2 HOURS 1 HOUR

Select “OFF” to cancel the auto power down.

•

5 Press [SETUP] to exit .

LETTERBOX

4 HOURS

Speci cations

Product

DTV Digital to Analog Converter

Tuner

Receivable channels 2-69ch

Connecting Jacks ANT. IN/OUT

RF connector x2 (75ohm)

Video Output

RCA jack x1, 1Vpp (75ohm)

Analog Audio Output

RCA jack (L / R) x2 2V rms (100k ohm)

Power Source

120V AC+/-10%, 60Hz+/-0.5%

Power Consumption

8W (Power on), Less than 1 W (Power o ) ENERGY STAR adopted.

Closed Caption System

§15.122/FCC (digital CC)

Operating Condition

41°F (5°C) - 104°F (40°C)

Dimensions (W x H x D)

9.7" x 1.7" x 6" (244mm x 43mm x 150mm)

Weight

1.4lbs. (0.6Kg) Designs and Speci cations are subject to change

without notice.

Others

Troubleshooting

Before requesting service, check the table below for a possible cause of the problem.

Symptom Remedy

•

Make sure that the AC power cord is securely plugged into the power

No power

The STB is not responding to the remote control.

No audio / picture

Blocked noise on picture No EPG or the provided

information is wrong

Low volume

No reception

When you forget the password for V-chip

Closed captioning display (TEXT mode) does not go o even after changing channels through STB.

The TV screen goes blank just after turning the STB on.

outlet. Make sure that the STB’s main power is on.

•

Make sure to point the remote control at the remote control sensor.

•

You may be too far from STB. Try moving closer.

•

Remove any obstacles between the remote control and the remote control sensor.

Make sure that the batteries are installed in the correct direction

•

(+ and –). ( The batteries may be depleted. Replace them with new ones.

•

Make sure that the audio / video cables are correctly connected.

•

Make sure that the TV is turned on.

•

Make sure that the correct viewing channel (ch3 or external input channel) is selected on your TV. ( for further information.

•

Make sure the cables are not damaged. Make sure that the RF cable is connected correctly. (

•

Make sure that “D.S.T” and “TIME ZONE” is set correctly. ( Page 21.)

•

Sound volume differs depending on the audio out setting. Select “RF OUT” at step 6 in the “Initial Setup (Setup Wizard)”. (

•

Make sure to complete autoscan in “SETUP WIZARD” or in “SETUP” menu. When autoscan is not completed, some channels will not be received.

•

The selected channel does not exist at that time. There are not always sub-channels being broadcast.

•

Some channels with weak signal may not be received properly. This is not a malfunction.

If you forget the password, refer to “New Password”. (

•

Change the channel on your TV.

•

Turn the TV off, and then on.

•

This is a normal part of the start-up process and is not a malfunction.

Page 7.)

Page 13.) Refer to your TV’s manual

Pages 10 - 12.)•

Page 14.)

Others

Page 24.)•

Fin

LIMITED WARRANTY

FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows:

DURATION:

PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date

LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of

LIMITS AND EXCLUSIONS:

THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.

This warranty shall not be extended to any other person or transferee. This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing

or if service was attempted by an unauthorized service center. This limited warranty does not apply to any product not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occur during normal use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or products not supplied by FUNAI CORP., or damage, which results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product, or damage which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES.

ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER. THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER. THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO PROOF

OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIR COSTS WILL BE CHARGED.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE.

WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:

To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI CORP. will not reimburse you for any service done by unauthorized service providers without prior written approval.

To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please contact us at:

of original retail purchase. Certain parts are excluded from this warranty.

original retail purchase.

FUNAI CORPORATION

Customer Service

Tel: 1-800-605-8610

http://www.funai-corp.com

19900 Van Ness Avenue, Torrance, CA 90501

Printed in China X6045UD

1VMN25613 ★★★★★

Magnavox TB100MW9A User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual