REMOTE CONTROL MANUAL
MODEL: W-08CR
W-10CR
W-12CR
MAGNAVOX and SMART. VERY SMART are registered
trademarks of Koninklijke Philips N.V. and are used under
license from Koninklijke Philips N.V.
Using
Using
Remote control specifications ....................................................... 3
Buttons functions ............................................................................ 4
mode
Fan
mode
mode
mode
Range of the remote control
Use the remote control within a 15 foot
towards the receiver. Reception is con-
15ft
going
from interfering with
The remote control is powered by two AAA cover. batteries detacol in the back
firmed by a beep.
AC
AC
back.in
e, pointing itcnailppa eht morf egnar
prevent
When the batteries are removed, the remote control resets all user configured
programming. After inserting new batteries, the remote control will have to be
reprogrammed.
Remote Control Models
Battery Type
Operating Temperature
3.0V(Two AAA batteries)
15ft
Operation starts and
stops when the button
is pressed
If the unit has Energy
Saver function, it will initiate
automatically the Energy
Saver function under COOL,
DRY, AUTO (only Auto-Cooling
and Auto-Fan) modes.
HEAT(Cooling & heating
models only) and FAN.
one degree
up
"AUTO
START" "AUTO STOP"
Pushing this button will
automatically set the
COOL mode and fan
speed to the temperature
of around 26 C/80 F. Any
previously set
grams will be interrupted.
o o
TIMER pro-
All the illustrations are for explanation purposes only.
The actual remote control design may differ.
one degree increments
down to around
o o
Press this button to
activate the Sleep
mode. This function is
only available on COOL,
HEAT or AUTO mode
to maintain a comfortable temperature.
mode
on前面加：only
only
mode
running.
one degree
select
depending on
In Auto mode, the fan speed is controlled automatically.
mode so that it
will automatically
desired set temperature
change the
mode
only
running.
running.
one degree
In the Dehumidifying mode, you cannot switch the
fan speed. It is automatically controlled in this
mode.
mode
only on
one degree, 30 minutes after the
one degree
one degree
is pressed
to
AUTO-START and AUTO-STOP setting program
the range
AUTO-START/STOP
shown display
is
START
the
AUTO-STOP
UP
that
is
DOWN
AUTO-
30 minute
AUTO START/STOP
This feature is useful when you want to program
the AC to automatically STOP and then START.
taht setacidni tirenoitidnoc ria eht fo display
This feature is useful when you want to program
the AC to automatically START and then STOP.
DOWN
on the LCD display of the air conditioner.
UP
appears
Loading...