Magnavox NB500MG9 User Manual

Download

Page 1

Owner’s Manual

NB500MG9

Blu-ray Disc Player

Read your Owner’s Manual first for

quick tips that make using your

Magnavox product more enjoyable.

If you have read assistance,

you may access our online help at

http://www.funai-corp.com

or call

1-800-605-8610

while with your product

(and Model / Serial number)

Playback Function Setup OthersIntroduction Connections

Page 2

PRECAUTIONS

The model and serial numbers of this unit may be found on the cabinet. You should record and retain those numbers for future reference.

Model No.:

Serial No.:

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPARATUS TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The caution marking is located on the rear or bottom of the cabinet.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the apparatus’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the apparatus.

Important Safeguards

1. READ INSTRUCTIONS - All the safety and operating instructions should

be read before the apparatus is operated.

2. RETAIN INSTRUCTIONS - The safety and operating instructions should

be retained for future reference.

3. HEED WARNINGS - All warnings on the apparatus and in the operating

instructions should be adhered to.

4. FOLLOW INSTRUCTIONS - All operating and use instructions should be

followed.

5. CLEANING - Unplug this apparatus from the wall outlet before cleaning.

Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

EXCEPTION: An apparatus that is meant for uninterrupted service and,

that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the apparatus in the cleaning description otherwise required in item 5.

6. ATTACHMENTS - Do not use attachments not recommended by the

apparatus manufacturer as they may cause hazards.

7. WATER AND MOISTURE - Do not use this apparatus near water, for

example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

8. ACCESSORIES - Do not place this apparatus on an

unstable cart, stand, tripod, bracket, or table. The apparatus may fall, causing serious injury to someone, and serious damage to the apparatus. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the apparatus. Any mounting of the apparatus should follow the manufacturer’ s instructions and should use a mounting accessory recommended by the manufacturer. An apparatus and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the apparatus and cart combination to overturn.

9. VENTILATION - Slots and openings in the cabinet and the back or

bottom are provided for ventilation and to ensure reliable operation of the apparatus and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the apparatus on a bed, sofa, carpet, rug, or other similar surface. This apparatus should never be placed near or over a radiator or heat register. This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

10. POWER SOURCES - This apparatus should be operated only from the

type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your apparatus dealer or local power company. For the apparatus’s intended to operate from battery power, or other sources, refer to the operating instructions.

11. GROUNDING OR POLARIZATION - This apparatus is equipped with a

polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

12. POWER-CORD PROTECTION - Power-supply cords should be routed

so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the apparatus.

13. OUTDOOR ANTENNA GROUNDING - If an outside antenna or cable

system is connected to the apparatus, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A)

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL ELECTRICAL CODE

NEC – NATIONAL ELECTRICAL CODE

14. LIGHTNING - For added protection for this apparatus receiver during a

lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the apparatus due to lightning and power-line surges.

15. POWER LINES - An outside antenna system should not be located in the

vicinity of overhead power lines or other electric light of power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

16. OVERLOADING - Do not overload wall outlets and extension cords as this

can result in a risk of fire or electric shock.

17. OBJECT AND LIQUID ENTRY - Never push objects of any kind into this

apparatus through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the apparatus.

18. SERVICING - Do not attempt to service this apparatus yourself as

opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19. DAMAGE REQUIRING SERVICE - Unplug this apparatus from the wall

outlet and refer servicing to qualified service personnel under the following conditions: a. When the power supply cord or plug is damaged or frayed. b. If liquid has been spilled, or objects have fallen into the apparatus. c. If the apparatus has been exposed to rain or water. d. If the apparatus does not operate normally by following the operating

instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified

technician to restore the apparatus to its normal operation. e. If the apparatus has been dropped or damaged in any way. f. When the apparatus exhibits a distinct change in performance, this

indicates a need for service.

20. REPLACEMENT PARTS - When replacement parts are required, be sure the

service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards.

21. SAFETY CHECK - Upon completion of any service or repairs to this

apparatus, ask the service technician to perform routine safety checks to determine that the apparatus is in proper operating condition.

22. HEAT - This apparatus should be situated away from heat sources such as

radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

FIGURE A

ELECTRIC SERVICE EQUIPMENT

GROUND CLAMP

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)

ANTENNA LEAD WIRE

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMP

Page 3

PRECAUTIONS

Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling unit can cause serious injury or even death.

CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.

FCC WARNING

This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this apparatus if an unauthorized change or modification is made.

RADIO-TV INTERFERENCE

This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This apparatus generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this apparatus does cause harmful interference to radio or television reception, which can be determined by turning the apparatus off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the apparatus and receiver.

3) Connect the apparatus into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.

NOTE TO CATV SYSTEM INSTALLER

This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground should be connected to the grounding system of the building as close to the point of cable entry as practical.

Introduction

Connections

Playback Function Setup Others

LASER SAFETY

This apparatus employs a laser. Only a qualified service person should remove the cover or attempt to service this apparatus, due to possible eye injury.

CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may

CAUTION: Visible and invisible laser radiation when open and interlock defeated. Do not stare into beam. LOCATION: Inside, near the deck mechanism.

ABOUT COPYRIGHT

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

result in hazardous radiation exposure.

Page 4

PRECAUTIONS

Supplied Accessories

remote control with batteries (AAx2) (NB812UD)

owner’s manual (EN/ES/FR) (1VMN25073 / 1VMN25075

/ 1VMN25293)

Owner’s Manual

RCA audio / video cables

(WPZ0102TM015 / WPZ0102LTE01)

quick start guide (EN/ES/FR) (1VMN25074 / 1VMN25076)

AC cord (WAV0162LW001)

To Avoid the Hazards of Electrical Shock and Fire

Do not handle the power cord with wet hands.

• Do not pull on the power cord when disconnecting it

• from an AC outlet. Grasp it by the plug.

Do not put your fingers or objects into the unit.

•

Installation Location

For safety and optimum performance of this unit:

Install the unit in a horizontal and stable position. Do

• not place anything directly on top of the unit. Do not place the unit directly on top of the TV.

Shield it from direct sunlight and keep it away from

• devices of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes on the back and sides of the unit. Avoid locations subject to strong vibration or strong magnetic fields.

Be sure to remove the disc and unplug the AC power

• cord from the outlet before carrying the unit.

Moisture Condensation Warning

Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place or after heating a cold room or under conditions of high humidity. Do not use this unit at least for 2 hours until its inside gets dry.

Note about Recycling

This unit’s packaging materials are recyclable

• and can be reused. Please dispose of any materials in accordance with your local recycling regulations.

Batteries should never be thrown away or

• incinerated but disposed of in accordance with your local regulations concerning chemical wastes.

Maintenance

Servicing

•

Please refer to relevant topics on “TROUBLESHOOTING” on page 43 before returning the product.

•

If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug, and please call our toll free customer support line found on the cover of this manual to locate an authorized service center.

Cleaning the cabinet

•

Wipe the front panel and other exterior surfaces of the unit with a soft, slightly damp cloth.

•

Never use a solvent, thinner, benzene or alcohol to clean the unit. Do not spray insecticide liquid near the unit. Such chemicals may discolor the surface or damage the unit.

Cleaning discs

•

When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion.

•

Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analog records.

Cleaning the disc lens

•

If this unit still does not perform properly although you refer to the relevant sections and to “TROUBLESHOOTING” in this user manual, the laser optical pickup unit may be dirty. Consult your dealer or an authorized service center for inspection and cleaning of the laser optical pickup unit.

Disc handling

•

Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.

•

Always store the disc in its protective case when it is not used.

•

Note that discs with special shapes (heart-shaped discs, octagonal discs, etc.) cannot be played back on this unit. Do not attempt to playback such discs, as they may damage the unit.

IR signal check

If the remote control is not working properly, you can

• use an AM radio or digital camera (including a cellular phone with built-in camera) to see if it is sending out an infrared signal.

With an AM radio:

•

Tune the AM radio station to a nonbroadcasting frequency. Point the remote control towards it, push any button and listen. If the sound from the radio flutters, it is receiving the remote control’s infrared signal.

With a digital camera

• (including built-in cell phone cameras):

Point a digital camera towards the remote control. Push any button on the remote control and look through the digital camera. If the infrared light appears through the camera, the remote control is working.

Page 5

PRECAUTIONS

Trademark Information

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Surround are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights Reserved.

“Blu-ray Disc“ and

is a trademark of DVD Format/Logo Licensing

Corporation.

are trademarks.

Introduction

Connections

Java and all other Java trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and / or other countries.

Playback Function Setup Others

Product that have earned ENERGY STAR® are designed to protect the environment through superior energy efficiency.

is trademark of Eastman Kodak Company.

All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes.

with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.

Page 6

CONTENTS

Introduction

PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Symbols Used in this Manual . . . . . . . . . . . . . . . . . . . . . . . .7

FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . 8

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Front Panel Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Connections

CONNECTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Connection to the TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Connection to an Audio System . . . . . . . . . . . . . . . . . . . 15

Connecting the AC Cord. . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Playback

INFORMATION ON PLAYBACK . . . . . . . . . . . . . . . . . . . 17

BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Operations Using Title Menu, Disc Menu,

and Pop-up Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Resume Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Playing Back an audio CD and a Disc with

JPEG Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Reading the SD Memory Card . . . . . . . . . . . . . . . . . . . . . 23

SPECIAL PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Fast Forward / Fast Reverse. . . . . . . . . . . . . . . . . . . . . . . . 25

Slow Forward Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Step by Step Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

A-B Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

PIP (Picture in Picture) Setting . . . . . . . . . . . . . . . . . . . . . 26

Program Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Camera Angle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

SPECIAL SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Switching Subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Switching Audio Soundtrack . . . . . . . . . . . . . . . . . . . . . . 29

Setting the BD Audio Mode . . . . . . . . . . . . . . . . . . . . . . . 30

Adjusting the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Function Setup

FUNCTION SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Using the Setup Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Others

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

LANGUAGE CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . Back Cover

Page 7

FEATURES

Features

Full high-definition video playback

Watch movies in the highest picture quality available for your HDTV. This unit offers full high-definition video playback up to 1080p resolution for an amazing viewing experience. A highly detailed picture and increased sharpness delivers a more true-to-life picture.

HDMI

1080p / fps output (BD only)

This unit is equipped with the feature which can provide the smooth movement in the playback of film originated material with the frame rate of 24 frames per second with progressive. (Available only when the TV is connected by an HDMI cable and compatible with 1080p24 frame input.)

Refer to “HDMI Video Resolution” in “FUNCTION SETUP” on page 34.

Introduction

Connections

Upconvert DVD for enhanced picture quality

Your current DVD will look even better than before thanks to video upconversion. Upconversion will increase the resolution of standard definition DVD to high definition up to 1080p over an HDMI connection. The picture will be less jagged and more realistic for a near high-definition experience.

Enjoy your content on different kinds of media

Full backwards compatibility with DVD, CD ensures that you can continue to enjoy your current audio-video collection. Additionally, you can view JPEG.

Listen to the rich multi-channel surround sound

Multi-channel surround sound, which realizes real-to-life sound and makes you feel that you are really there.

Easy and simple connection to your HDTV via HDMI

Connect this unit to your HDTV with one single HDMI (high definition multimedia interface) cable. It is recommended to use High Speed HDMI Cable for better compatibility. The high definition video output signal will be transferred to your HDTV without conversion to analogue signals, so you will get an excellent picture and sound quality, completely free from noise.

Thanks to other multiple outputs, you can also easily connect to your home theater system or amplifier.

Playing back the contents in SD Memory Card

You can play back JPEG stored in an SD Memory Card. You can store picture-in-picture commentary, subtitles or

other extras for BD-ROM Profile 1 ver.1.1 files in an SD Memory Card and play back with the BD-video.

Playback Function Setup Others

Symbols Used in this Manual

To specify for which media type each function is, we put the following symbols at the beginning of each item to operate.

Symbol Description

Description refers to BD-video and BD-RE (ver. 2.1) / BD-R recorded in BDMV format

Description refers to DVD-video

Description refers to audio CD / DTS-CD

Description refers to DVD, CD-RW/-R and SD Memory Card with JPEG files

If you do not find any of the symbols listed above under the function heading, the operation is applicable to all media.

PIP

Some BD-video have the PIP (picture-in-picture) function which enables you to display the secondary video in the primary video. You can call up the secondary video by pressing [PIP] whenever the scene contains the secondary video.

Pop-up menu

Some BD-video have pop-up menu which is a navigation menu that can be called up and be operated on the TV screen without interrupting the playback. You can call up the pop-up menu by pressing [POP MENU / MENU]. Contents in the pop-up menu vary depending on the disc.

HDMI Deep Color

Deep Color reduces the posterization effect of the playback image. Refer to “HDMI Deep Color” in “FUNCTION SETUP” on page 34.

Page 8

Front Panel

FUNCTIONAL OVERVIEW

12* 43567*8910

The unit can also be turned on by pressing these buttons.*

1. Disc tray

Place a disc when opening the disc tray.

•

2. A OPEN/CLOSE button*

Press to open or close the disc tray.

•

3. Disc indicator

This indicator lights up in blue when a disc is in this

• unit.

4. Display

Refer to “Front Panel Display” on page 11.

•

5. C STOP button

Press to stop playback.

•

6. k PAUSE button

Press to pause playback.

•

Rear Panel

3 4 5

7. B PLAY button*

•

Press to start or resume playback.

8. SD card slot

•

Insert an SD Memory Card, and play back the contents in it.

9. Infrared sensor window

•

Receive signals from your remote control so that you can control the unit from a distance.

10. STANDBY-ON indicator

•

This indicator lights up in red when the power is on and turns off when the power is off.

yySTANDBY-ON button

11.

Press to turn the unit on or off.

•

1. COMPONENT VIDEO OUT jacks

Use to connect a TV with component video inputs

• with an RCA component video cable.

2. HDMI OUT jack

Use to connect a TV with an HDMI compatible port

• with an HDMI cable.

3. AUDIO OUT jacks

Use to connect a TV, an AV receiver / amplifier or

• other device with an RCA audio cable.

4. DIGITAL OUT (COAXIAL) jack

Use to connect an AV receiver / amplifier, Dolby

• Digital / DTS decoder or other device with a digital audio coaxial input jack with a digital audio coaxial cable.

5. AC IN Terminal

•

Use to connect the AC outlet with the AC cord.

6. VIDEO OUT jack

•

Use to connect a TV, an AV receiver or other device with an RCA video cable.

Note

Do not touch the inner pins of the jacks on the rear

• panel. Electrostatic discharge may cause permanent damage to the unit.

This unit does not have the RF modulator.

•

Page 9

FUNCTIONAL OVERVIEW

Remote Control

DISPLAY

STANDBY-ON

TOP MENU

SETUP

SUBTITLE

11*

The unit can also be turned on by pressing these

buttons.

1. DISPLAY button

Press to display the on-screen display menu.

•

2. STANDBY-ON

Press to turn the unit on or off.

•

3. Number buttons

Press to enter the title, chapter, track or file

• number. Press to enter values in the input field.

•

4. SEARCH button

Press to display the search menu.

•

5. Red / Green / Blue / Yellow button

Press to select items on some BD menus.

•

6. TOP MENU button

Press to display the top menu.

•

7. Cursor K / L / { / B buttons

Press to select items or settings.

•

8. SETUP button

Press to display the setup menu.

•

9. SUBTITLE button

Press to display the subtitle menu.

•

10. REV E button

•

During playback, press to fast reverse the playback.

y y button

OPEN/ CLOSE

HDMI

PIP

ANGLE

REPEAT

A-B

CLEAR

POP MENU/

RETURN

AUDIO

MODE

15*

19 20

11. PLAY B button*

Press to start playback or resume playback.

•

12. SKIP H button

During playback, press once to return to the

• beginning of the current title, chapter or track. During the JPEG playback, press to return to the

• previous file. During playback, press twice to return to the

• previous title, chapter or track.

13. PAUSE F button

Press to pause playback.

• When playback is in pause mode, press repeatedly

• to forward the playback step by step.

14. HDMI button

Press to set the HDMI output mode.

•

15. OPEN/CLOSE A button*

Press to open or close the disc tray.

•

16. PIP button

Press to switch picture-in-picture feature on or off

• (only applicable to BD-video which supports the PIP function).

17. ANGLE button

Press to access various camera angles on the disc.

• Press to rotate the JPEG files.

•

18. REPEAT button

Press to toggle between various repeat modes.

•

19. A-B button

Press to play back a defined section between point

• A and B repeatedly.

20. CLEAR button

Press to clear the information once entered, to

• clear the marker settings, or to cancel the programming for audio CD, etc.

21. POP MENU/MENU button

Press to display the pop-up menu / disc menu.

•

22. OK button

Press to confirm or select menu items.

•

23. RETURN button

Press to return to the previously displayed menu

• screen.

24. AUDIO button

Press to display the audio menu.

•

25. FWD D button

During playback, press to fast forward the

• playback. In pause mode, press to slow forward the playback.

•

26. STOP C button

Press to stop playback.

•

27. SKIP G button

During playback, press to skip to the next title,

• chapter, track or file.

28. MODE button

During playback, press to display the picture

• adjustment menu. During the JPEG playback, press to display menus

• for changing the visual effect for switching the image or changing the size of the image. In stop mode with BD inserted, press to display a

• menu for setting the BD audio mode. In stop mode with audio CD, or JPEG files inserted,

• press to display menus for program and random playback.

Introduction

Connections

Playback Function Setup Others

Page 10

FUNCTIONAL OVERVIEW

Installing the Batteries in the Remote Control

Install the batteries (AAx2) matching the polarity indicated inside battery compartment of the remote control.

1 Open the cover.

2 Insert batteries.

Make sure to match + and - on the batteries to the marks indicated in the battery compartment.

3 Close the cover.

Using a Remote Control

Keep in mind the following when using the remote control:

Make sure that there are no obstacles between the

• remote control and the infrared sensor window on the unit.

Remote operation may become unreliable if strong

• sunlight or fluorescent light is shining on the infrared sensor window of the unit.

Remote control for different devices can interfere with

• each other. Avoid using remote control for other device located close to the unit.

•

Replace the batteries when you notice a fall off in the operating range of the remote control.

The maximum operable ranges from the unit are as

• follows.

Line of sight: approx. 23 feet (7m)

Either side of the center: approx. 16 feet (5m) within 30°

Above: approx. 16 feet (5m) within 15°

Below: approx. 10 feet (3m) within 30°

30˚30˚

16 feet

(5m)

23 feet

(7m)

16 feet

(5m)

Note

Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following:

Do not mix new and old batteries together.

• Do not use different kinds of batteries together.

• Although they may look similar, different batteries may have different voltages.

Make sure that the + and - ends of each battery

• match the indications in the battery compartment.

Remove batteries from battery compartment that is

• not going to be used for a month or more.

When disposing of used batteries, please comply with

• governmental regulations or environmental public instruction’s rules that apply in your country or area.

Do not recharge, short-circuit, heat, burn or

• disassemble batteries.

Page 11

FUNCTIONAL OVERVIEW

Front Panel Display

1 2

•

Brightness of the display can be adjusted. Refer to “Panel Display” in “FUNCTION SETUP” on page 41.

1. Displays playback status icon. Refer to the table below.

2. Displays various kinds of information such as title number, elapsed time, repeat mode, etc.

Playback status icon

Disc SD Memory Card

Playback is in progress

Stop mode

Pause mode

Mode

Introduction

Connections

Playback Function Setup Others

Example of Display Message

Fast forward mode

Fast reverse mode

Slow forward mode

Appears while repeat function is set

Title is being played back. Indicating the current title number and the elapsed time.

Current chapter is in chapter repeat mode.

Loading a disc.

Dolby Digital audio is being played back.

Page 12

CONNECTIONS

Connection to the TV

Make one of the following connections, depending on the capabilities of your existing device.

•

AUDIO CONNECTION AUDIO / VIDEO

Method 1

standard audio

AUDIO IN

standard picture

VIDEO

RCA video

RCA

audio cable

and oror or

cable

this unit

VIDEO

OUT

VIDEO CONNECTION

Method 2

better picture

COMPONENT

VIDEO IN

(Green)

PB/CB

(Blue)

PR/CR

(Red)

RCA component video cable

COMPONENT

VIDEO OUT

PR/CRY

(Red)

(Blue)

(Green)

Method 3

best picture

HDMI-DVI cable

DVI IN

best audio / picture

CONNECTION

Method 4

HDMI IN

HDMI cable

1, 2

PB/C

AUDIO OUT HDMI OUTVIDEO OUT COMPONENT

VIDEO OUT

*1 This unit is compatible with the progressive scan system. The feature provides you with the higher quality pictures

than traditional output system does. To utilize this feature, a component or an HDMI connection is required. Refer to “HDMI Video Resolution” or “Component Output” setting on page 34 to set the video resolution.

Analog audio connection is not required for this connection.

Supplied cables used in this connection are as follows:

RCA audio cable (L/R) x 1

• RCA video cable x 1

•

Please purchase the rest of the necessary cables at your local store.

Note

Connect this unit directly to the TV. If the RCA audio / video cables are connected to a VCR, pictures may be

• distorted due to the copy-protection system.

If the picture is not output properly to the TV because of “HDMI Video Resolution” or “Component Output” setting,

• press and hold [ B PLAY] on the front panel for more than 5 seconds. “HDMI Video Resolution” and “Component Output” setting will be reset to the default automatically.

A simple 1-cable connection with a device having an HDMI (high-definition multimedia interface) jack allows

• digital transfer of both digital video signals and multi-channel audio signals.

Page 13

CONNECTIONS

HDMI Output Mode and Actual Output Signals

Press [HDMI] to change the resolution of the video signal being output from HDMI OUT jack. The video resolution changes as follows every time [HDMI] is pressed.

Front Panel

Display

Press [HDMI]

To play back the digital video images of a BD / DVD via an HDMI connection, it is necessary that both the unit and the TV (or an AV amplifier) support a copyright protection system called HDCP (high-bandwidth digital content protection system). HDCP is copy protection technology that comprises data encryption and authentication of the connected AV device. This unit supports HDCP. Please read the operating instructions of your TV (or AV amplifier) for more information.

HDMI Video Resolution

480 Progressive

720 Progressive

1080 Interlaced

1080 Progressive

1080 Progressive 24 24 frame

Connections

Playback Function Setup OthersIntroduction

Note

When using HDCP-incompatible TV, the image will not be viewed properly.

• Among the devices that support HDMI, some devices can control other devices via the HDMI jack, this unit cannot

• be controlled by another device via the HDMI jack.

The audio signals from HDMI OUT jack (including the sampling frequency, the number of channels and bit length)

• maybe limited by the device that is connected.

Among the devices that support HDMI, some do not support audio output (e.g, projectors). In connections with

• device such as this unit, audio signals are not output from HDMI OUT jack.

You cannot select the video resolutions which are not supported by the connected TV, except when this unit’s

• HDMI OUT jack is connected to a DVI compatible display devices with an HDMI-DVI cable.

For HDMI OUT jack to DVI connection, after you select an HDMI output mode, corresponding HDMI video

• resolution will be output. The HDMI video resolution you selected will be output even if the connected TV is not compatible with the HDMI video resolution. If there is no image displayed on the connected TV, please select another HDMI video resolution.

Video and audio signals may be distorted temporarily when switching to / from the HDMI output mode.

• You can also change the HDMI output mode from “HDMI Video Resolution” setting in “Video” menu. In this menu,

• you can confirm what HDMI video resolutions are supported by connected TV. Refer to page 34.

In order to get natural and high quality film reproduction of 24-frame film material, use an HDMI cable (High

• Speed HDMI Cable is recommended) and select “1080p24” if the connected TV is compatible with 1080p24 frame input.

Even if you set “HDMI Video Resolution” setting to “1080p24”, when the contents of the disc is not compatible for

• 1080p24 frame, 1080p60 frame will be output.

There is no output from VIDEO OUT and COMPONENT VIDEO OUT jacks when you play back a BD that recorded

• 24-frame film material by HDMI output mode of 1080p24.

COMPONENT VIDEO OUT jacks may not output any signals when you set “HDMI Deep Color” setting to “Auto”.

• It is recommended to use High Speed HDMI Cable (also known as HDMI category 2 cable) for better compatibility.

•

Page 14

CONNECTIONS

HDMI Audio Setting

When using HDMI connections make “HDMI Audio Out” setting in “Audio” menu according to the specifications of the device to be connected.

Device to be connected “HDMI Audio Out” setting Output HDMI audio signal

Device compatible with Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD decoding

Device compatible with 3 or more channels of audio inputs (not Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD compatible)

HDMI connection to a TV, and digital audio connection (coaxial) to an AV amplifier.

Audio signals output from HDMI OUT jack

■

Disc type Audio recording format

Dolby Digital Dolby Digital*

Dolby Digital Plus Dolby Digital Plus*

BD-video

Dolby TrueHD Dolby TrueHD*

DTS DTS*

DTS-HD DTS-HD*

LPCM Multi LPCM Multi LPCM

Dolby Digital Dolby Digital Multi LPCM

DVD-video

DTS DTS Multi LPCM

LPCM Multi LPCM Multi LPCM

audio CD 2ch LPCM 2ch LPCM

DTS-CD DTS Multi LPCM

HDMI Multi (Normal) Dolby Digital, Dolby Digital Plus, Dolby

TrueHD, DTS, or DTS-HD bitstream are output from HDMI OUT jack. Make the speaker settings on the connected AV amplifier, etc.

HDMI Multi (LPCM) Multi-channel audio signals are output

from HDMI OUT jack. Make the speaker settings with the speaker setting items appear after you select “HDMI Multi(LPCM)”. Refer to page 36.

Audio Mute HDMI audio will be muted, and Dolby

Digital / DTS bitstream or LPCM will be output from DIGITAL OUT jack depending on “Digital Out” setting. Refer to page 37.

“HDMI Audio Out” setting

HDMI Multi(Normal) HDMI Multi(LPCM)

Multi LPCM

Multi LPCM*

Multi LPCM

Multi LPCM*

If “BD Audio Mode” setting is set to “Mix Audio Output”, audio will be output as multi LPCM. Refer to page 36.

Outputs audio signals decoded from independent substream.

Outputs audio signals decoded from Dolby Digital stream.

*4 Outputs audio signals decoded from DTS core stream.

•

If the connected device is not compatible with the HDMI BITSTREAM, audio will be output as multi LPCM or 2-channel down-mixed LPCM depending on the capability of the connected device even if you select “HDMI Multi(Normal)” in “HDMI Audio Out” setting. Refer to page 36.

Page 15

CONNECTIONS

Connection to an Audio System

When you change the connections, all devices should be turned off.

• Refer to the manual accompanying external devices for more information.

•

2-Channel Analog Audio Connection

stereo system

AUDIO

OUT

AUDIO IN

audio

analog audio input jacks

RCA audio cable

this unit

Connections

Playback Function Setup OthersIntroduction

Digital Audio Connection

AV receiver / amplifier

audio

this unit

AUDIO OUT

DIGITAL AUDIO INPUT

digital audio coaxial

input jack

DIGITAL OUT (COAXIAL)

COAXIAL

digital audio coaxial cable

Supplied cables used in this connection are as follows:

RCA audio cable (L/R) x 1

• Please purchase the rest of the necessary cables at your local store.

Page 16

CONNECTIONS

Audio signals output from DIGITAL OUT jack (COAXIAL)

■

The audio signals currently output from HDMI OUT jack will be output from DIGITAL OUT jack as well, except that Dolby Digital signal will be output instead of Dolby Digital Plus and Dolby TrueHD, and DTS signal will be output instead of DTS-HD.

When “Audio Mute” is selected in “HDMI Audio Out” setting, audio signals output from HDMI OUT jack will be muted and the audio signals output from DIGITAL OUT jack changes depending on “Digital Out” setting.

To set “Digital Out” setting, select “Audio Mute” in “HDMI Audio Out” setting.

Disc type Audio recording format

Dolby Digital Dolby Digital 2ch Downmix LPCM

Dolby Digital Plus Dolby Digital 2ch Downmix LPCM

BD-video

DVD-video

audio CD 2ch LPCM 2ch LPCM

DTS-CD DTS 2ch Downmix LPCM

* For BD titles with secondary or interactive audio, these audio will be output as Dolby Digital when all the conditions

listed below are met:

•

When “BD Audio Mode” setting is set to “Mix Audio Output”.

•

When “HDMI Audio Out” setting is set to “Audio Mute”.

•

When “Digital Out” setting is set to “Bitstream”.

If BD titles do not have secondary or interactive audio, the audio will be output as shown in the table.

•

This table applies only when HDMI cable is not connected or “Audio Mute” is selected in “HDMI Audio Out” setting.

Dolby TrueHD Dolby Digital 2ch Downmix LPCM

DTS DTS* 2ch Downmix LPCM

DTS-HD DTS* 2ch Downmix LPCM

LPCM 2ch Downmix LPCM* 2ch Downmix LPCM

Dolby Digital Dolby Digital 2ch Downmix LPCM

DTS DTS 2ch Downmix LPCM

LPCM 2ch Downmix LPCM 2ch Downmix LPCM

Bitstream LPCM

“Digital Out” setting

Note

In order to output LPCM signal from DIGITAL OUT jack while outputting the HDMI audio signal, set “BD Audio

•

Mode” setting to “Mix Audio Output” and set “HDMI Audio Out” setting to “HDMI Multi(LPCM)”.

Connecting the AC Cord

After you made all necessary connections, connect the AC cord to the AC IN. Then connect the AC cord to the AC outlet.

Insert the plugs securely. Incomplete connections will result in the generation of noise.

this unit

AC cord

Supplied cables used in this connection are as follows:

AC cord x 1•

AC outlet

AC 120V, 60 Hz

Page 17

INFORMATION ON PLAYBACK

Before you start playing back a disc, read the following information.

Playable Discs and Files

This unit is compatible to play back the following discs / files. To play back a disc / file, make sure that it meets the requirements for region codes and color systems as described below. You can play back discs that have the following logos. Other disc types are not guaranteed to play back.

Playable discs Logos

Blu-ray Disc

- BD-video (single / double layer)

- BD-RE ver.2.1 (single / double layer) (Recorded in BDMV format)

- BD-R (single / double layer) (Recorded in BDMV format) (Unclosed discs may not be played back.)

DVD-video

DVD+RW (single layer)

DVD+R (single / double layer)

Note for SD Memory Cards

Do not remove the SD Memory Card or turn off the

• unit while the contents of the card is in playback. It may result in malfunction or loss of the card’s data.

Please keep the SD Memory Cards in their cases

• when you are not using them. Do not try to open or modify the card.

• Do not touch the terminal surface with your fingers

• or any metals.

Do not attach additional labels or stickers to cards.

• Do not remove the label of the SD Memory Cards.

• This unit supports SD Memory Card with FAT12/

• FAT16 file system, and SDHC Memory Card with FAT32 file system.

This unit may not read the SD Memory Cards

• formatted on computer. If that is the case, please reformat the SD Memory Cards in this unit and try again.

This unit does not supports miniSDHC and

• microSDHC Memory Card.

For miniSD Card and microSD Card, the adapter is

• necessary.

Portions of this product are protected under

• copyright law and are provided under license by ARIS / SOLANA / 4C.

miniSD Card adapter

miniSD Card

microSD Card adapter

microSD Card

Introduction

Connections

Playback

Function Setup Others

CD-DA (audio CD)

CD-RW

CD-R

Kodak Picture CD

DTS-CD

Playable files Media

DVD, CD-RW/-R,

JPEG

Readable cards Playable files / data

SD Memory Card (8MB - 2GB)

SDHC Memory Card (4GB)

miniSD Card (8MB - 2GB)

microSD Card (8MB - 2GB)

SD Memory Card (including SDHC), miniSD Card, microSD Card

JPEG, picture-in-picture commentary, subtitles or other extras for BD-ROM Profile 1 ver.1.1

Unplayable Discs and Files

The following discs will not be played back in this unit.

CD-ROM• CD-I (compact disc-interactive)• DVD-RAM• VSD (video single disc)• DVD-audio• BD-RE (ver.1 / ver.3)• HD DVD• video CD• unfinalized disc• SVCD• BD-RE/-R recorded in BDAV format• DVD / CD / SD Memory Card contains MP3,

• Windows Media™ Audio files and DivX®

DVD-RW/-R recorded in VR mode or non compatible

• recording format.

super audio CD - Only the sound on the CD layer can

• be heard. The sound on the high-density super audio CD layer cannot be heard.

Playability of dual discs are not guaranteed.•

Page 18

INFORMATION ON PLAYBACK

Color Systems

BD-video and DVD-video are recorded in different color systems throughout the world. The most common color system is NTSC (which is used primarily in the United States and Canada).

This unit employs NTSC color system, so the disc you play back must be recorded in the NTSC system. You cannot play back the disc recorded in other color systems.

Region Codes

BD-video

This unit has been designed to play back BD-video with region A and DVD-video with region “1” or “ALL“. You cannot play back BD-video or DVD-video that are labeled for other regions. Look for the symbols on the right on your BD-video or DVD-video. If these region symbols do not appear on your BD-video or DVD-video, you cannot play back the disc in this unit. The letter or number inside the globe refers to region of the world. A BD-video or DVD-video labeled for a specific region can only be played back in the unit with the same region code.

BD-video

DVD-video

Structure of Disc / SD Memory Card Contents

The contents of BD-video / DVD-video are generally divided into titles. Titles may be further subdivided into chapters.

title 1 title 2

chapter 1 chapter 2 chapter 1 chapter 2 chapter 3

BD-video / DVD-video

On-Screen Display

You can check information about the current disc by pressing [DISPLAY].

To call the on-screen display menu, press [DISPLAY] during playback. Every time you press [DISPLAY], the information changes. Depending on the media, available information varies.

off A Title / Chapter information

A Title information (elapsed time) A Title information (remaining time) A HDMI information A off

off A Chapter information (elapsed time) A Chapter information (remaining time) A Title information (elapsed time) A Title information (remaining time) A Bit rate information A HDMI information A off

off A Track information (elapsed time) A Track information (remaining time) A Disc information* (elapsed time) A Disc information* (remaining time) A HDMI information A off

(*not available during program / random playback)

off A File name information A File information A HDMI information A off

audio CD are divided into tracks.

track 1 track 2 track 3 track 4 track 5

Data discs or SD Memory Cards contain JPEG are divided into folders, and the folders are subdivided into files.

folder (group) 1 folder (group) 2

group(folder)1 group(folder)2

le (track) 1 le (track) 2 le (track) 3 le (track) 4 le (track) 5

audio CD

JPEG

For audio CD and JPEG, during program or random

• playback, the indication will be displayed after the track / file information.

Page 19

Chapter information

■

1 3 42

INFORMATION ON PLAYBACK

Track / File information

■

1 3 42

Introduction

3 / 5 0 : 01 : 02

5 6

1 1 / 10 A B

Current chapter number / Total number of

chapters

Elapsed time / Remaining time of the current

chapter

Indicates that the multi camera angle images are

available on the scene

Current playback status

Current title number

Current repeat setting (Only when repeat setting

is active) (C: Chapter repeat, T: Title repeat, AB : A-B repeat)

■

Title information

1 2

3 / 5 0 : 01 : 02

Current title number / Total number of titles

Elapsed time / Remaining time of the current title

■

Bit rate information

Bit rate (The amount of video data currently being

read)

Layer number (Only for 2-layered discs)

(L0: Layer 0 is played back. L1: Layer 1 is played back)

Current track (file) number / Total number of track

SD1 / 14 0 : 00: 51

(file)

Elapsed time / Remaining time of the current track

Indication of SD Memory Card playback

Current repeat setting

(Only when repeat setting is

active)

Connections

(T: Track / File repeat, G: Group repeat, A: All repeat, AB: A-B repeat)

■

Disc information

1 2

1 / 14 0 : 00: 51

Current track number / Total number of tracks

Elapsed time / Remaining time of the current disc

File name information

■

File_name_001

Media icon and file name

Playback

Function Setup Others

: JPEG file

HDMI information

■

Video Info Audio Info

HDMI video format

Resolution of the HDMI output image

HDMI audio format

Maximum numbers of audio channels that can be

Max Channel

YCbCr PCM

2 ch

/ 1080i:

accepted by the connected device

Note

If the HDMI cable is not connected, “---” will be

• displayed for HDMI information.

Page 20

MODE

Playback

BASIC PLAYBACK

Press [STANDBY-ON y ].

STANDBY-ON

EAR

BTITL

DISPLAY

OPEN/

A-

LEAR

AUDIO

Turn on the TV and select the

appropriate input on the TV to which the unit is connected.

Press [OPEN / CLOSE A ] to open the

disc tray.

Place the disc on the disc tray with its

label side facing up.

Align the disc to the disc tray guide.

Press [OPEN / CLOSE A ] to close the

disc tray.

It may take a while to load the disc.

Some discs may start playback automatically.

Press [PLAY B] to start playback.

For many of BD-video and DVD-video, a menu screen may appear.

In this case, use [K / L / s / B] to select the desired item, then press [OK].

Press [STOP C ] once to stop

playback temporarily.

Refer to “Resume Playback” on page 21.

To eject the disc:

Press [OPEN / CLOSE A ] to open the disc tray, then remove the disc before turning off the unit.

Note

may appear at the top-right on the TV screen

• when the operation is prohibited by the disc or this unit.

During the playback of 2-layered disc, pictures may

• stop for a moment. This happens when the 1st layer switches to the 2nd layer. This is not a malfunction.

The operation may vary when you play back

• BD-video and DVD-video with disc menu. Refer to the manual accompanying the disc for details.

Page 21

BASIC PLAYBACK

Operations Using Title Menu, Disc Menu, and Pop-up Menu

Many of BD-video and DVD-video disc contains title menu (BD-video / DVD-video), disc menu (DVD-video) or popup menu (BD-video) which guides you through the available functions in the disc. The contents of the menus may differ depending on the discs.

Title menu (BD-video / DVD-video)

1 Press [TOP MENU].

The title menu will appear.

•

2 Use [K / L / s / B] to select an item, then

press [OK].

3 Press [TOP MENU] to exit.

Disc menu (DVD-video)

1 Press [POP MENU / MENU].

•

The disc menu will appear.

2 Use [K / L / s / B] to select an item, then

press [OK].

3 Press [POP MENU / MENU] to exit.

Pause

1 During playback, press [PAUSE F ].

•

Playback will be paused.

2 Press [PLAY B ] to return to normal

playback.

Note

For BD and DVD, set “Still Mode” setting to “Field” in

• “Video” menu if pictures in the pause mode are blurred (refer to page 35).

Resume Playback

1 During playback, press [STOP C ].

Resume message will appear on the TV screen.

•

Resume ON

Introduction

Connections

Playback

Function Setup Others

Pop-up menu (BD-video)

•

This is a special feature available for some BD-video. When you press [POP MENU / MENU], a menu pops out on the TV screen while the contents still play back.

1 During the playback of BD-video, press

[POP MENU / MENU].

The pop-up menu will appear.

•

2 Use [K / L / s / B] to select an item, then

press [OK].

3 Press [POP MENU/MENU] to exit.

Note

Contents of menus and corresponding menu

• operations may vary among discs. Refer to the manual accompanying the disc for details.

Press ‘PLAY’ to play from here. To play the beginning, press ‘STOP’ first and then ‘PLAY’.

e.g.) BD

2 Press [PLAY B ].

In a few seconds, playback will resume from the

• point at which it stopped last. To cancel the resume playback and start playback the disc from the beginning, press [STOP C ] again in stop mode.

Note

•

The resume information will be saved even when the power is turned off.

•

If you open the disc tray or press [STOP C ] again in stop mode, the resume information will be cleared.

•

If you switch between “Disc” mode and “SD Memory” mode, the resume information will be cleared.

•

If you change “BD Rating Level” or “DVD Rating Level” setting in “

information will be cleared. For SD Memory Card, if you open the disc tray or

• turned off the power, resume information will be cleared.

Parental” menu, the resume

Page 22

BASIC PLAYBACK

Playing Back an audio CD and a Disc with JPEG Files

Insert an audio CD or a disc with JPEG

files.

•

The file list will appear on the TV screen.

•

If file list does not appear automatically, press [POP MENU / MENU].

•

Press [POP MENU / MENU] to exit and resume the file list.

Use [K / L] to select a desired folder

or file, then press [OK]. Use [ s / B ] to go back and forward between the hierarchies.

If you press [OK] on the desired file, playback

• will start.

File List

JPEG_DISC

Folder_1

Folder_2 Folder_3 JPEG_A JPEG_B JPEG_C JPEG_D

Folder_1

4 5

2 / 4

It is recommended that files to be played back in this unit are recorded under the following specifications:

<JPEG>

Upper limit: 2,560 x 1,900 dots

•

Lower limit: 32 x 32 dots

• File size of image maximum: 12 MB

•

(sub sampling is 4:4:4) 5,120 x 3,840 dots (sub sampling is up to 4:2:2)

Note

The system can recognize up to 255 folders / 999 files

•

for CD, 999 folders / 9999 files for DVD and SD Memory Card.

The name of folder and file can be displayed up to 28

•

characters. Unrecognizable characters will be replaced with asterisks.

The 9th and deeper hierarchies cannot be displayed

•

for CD and the 10th and deeper hierarchies cannot be displayed for DVD and SD Memory Card.

Files whose extension is other than “.jpg / .jpeg(JPEG)”

•

will not be listed. Some unplayable folders or files may be listed due to

•

the recording status. High-resolution JPEG files take longer to be displayed.

•

Progressive JPEG files (JPEG files saved in progressive

•

format) cannot be played back in this unit. This unit recognize up to 8 characters of file name in

•

the SD Memory Card. Characters after 9th will not be displayed.

For the SD Memory Card playback, refer to “Reading

•

the SD Memory Card” on pages 23-24.

e.g.) JPEG

audio CD: “CD-DA” will be displayed.

JPEG: Current folder name (Disc or SD

audio CD: List of the track number and time.

JPEG: List of the file / folder names in the

audio CD: Selected track number and time.

JPEG: Selected file / folder name

Current page / Total page number

Indication of previous / next page

•

Use [SKIP H / G ] to go back and forward between the pages.

•

Press [TOP MENU] to return to the first item.

Icons:

: Folder

: audio CD track

: JPEG file

Memory Card name will be displayed for the top of the hierarchies.)

current folder / disc

Page 23

BASIC PLAYBACK

Kodak Picture CD

This unit can also run JPEG files stored on Kodak Picture CD. You can enjoy picture images on the TV set by playing back the Kodak Picture CD. This unit confirms to ver.7.0 of Kodak Picture CD. For details of Kodak Picture CD, contact a shop that provides developing service of Kodak Inc.

When Kodak Picture CD is inserted in

this unit, Kodak Picture CD menu appear automatically on the TV screen.

Photo A Photo B Photo C

Photo D Photo E Photo F

7 / 32HG

12 2

1. Current track number / The total number of tracks

2. Indication of previous / next page

•

In stop mode, press [POP MENU / MENU] to call Kodak Picture CD menu.

Use [K / L / s / K] to select a desired

track to be played back, then press [PLAY B ] or [OK].

•

An image will be played back from the selected track and go to the next one in turn.

•

Use [SKIP H / G ] to go back and forward between the pages.

Reading the SD Memory Card

You can play back the JPEG files in an SD Memory Card. With the SD Memory Card, you can also enjoy the special additional contents for BD-ROM Profile 1 ver.1.1 which can be downloaded from the internet. You can store the contents on an SD Memory Card via computer and play them back with the BD-video. For more information about the special additional contents, please refer to the instruction book that came with the disc.

Setting the media mode

■

In stop mode, press [SETUP].

Use [ K / L ] to select

[OK].

Custom

Language Video Audio Parental Others

Use [ K / L ] to select

[OK].

, then press

Introduction

Connections

Playback

Function Setup Others

Press [STOP C] to stop playback.

Tips for JPEG / Kodak Picture CD Playback

Every press on [ANGLE] will turn the image clockwise

• by 90 degrees when an image is displayed.

To change the visual effect for switching the playback

• image, press [MODE] once, then use [s / B] or [OK] to switch between “Cut In/Out” and “Fade In/Out”. The size change may have no effect on some files (e.g. files with a small picture size).

During JPEG / Kodak Picture CD playback, press

• [MODE] twice to change the size of the playback image, then use [ s / B] or [OK] to switch between “Normal” (100%) and “Small” (95%). The size change may have no effect on some files (e.g. files with a small picture size).

Others

Angle Icon Auto Power Off Panel Display Slide Show Media Select

On On Auto 5sec Disc

Use [ K / L ] to select “Media Select”

setting.

Page 24

BASIC PLAYBACK

Press [OK] repeatedly to select “SD

Memory”.

Others

Angle Icon Auto Power Off Panel Display Slide Show

Media Select

This will set the unit to “SD Memory” mode. To

• play back the contents in any discs, exit “SD Memory” mode by selecting “Disc”.

Press [SETUP] to exit.

On On Auto 5sec

SD Memory

Inserting the SD Memory Card and playback

Insert an SD Memory Card into the

Removing the SD Memory Card

SD card slot until it clicks with the label facing up.

The file list will appear.

SD Memory Card

Follow the step 2 in “Playing Back an

audio CD and a Disc with JPEG Files” on page 22.

In stop mode, push the SD Memory

Card and then slowly remove your finger.

Grasp the card and pull it out from

the SD card slot.

Compatible Cards:

- SD Memory Card (8MB - 2GB)

- SDHC Memory Card (4GB)

- miniSD Card (8MB - 2GB)

- microSD Card (8MB - 2GB)

•

For miniSD Card and microSD Card, the adapter will be required.

Note

Do not remove the card during its playback.

• This unit supports SD Memory Card with FAT12 /

• FAT16 file system, and SDHC Memory Card with FAT32 file system.

Do not delete the folders or files in the SD Memory

• Card with your computer. This unit might not read the SD Memory Card.

This unit recognize up to 8 characters of file name in

• the SD Memory Card. Characters after 9th will not be displayed.

Page 25

SPECIAL PLAYBACK

Fast Forward / Fast Reverse

1 During playback, press [FWD D]

repeatedly for fast forward.

During playback, press [REV E] repeatedly for fast reverse.

Every time you press [FWD D] or [REV E], the playback speed will change.

2 Press [PLAY B] to return to normal

playback.

Note

For BD and DVD, the approximate speed for the fast

• forward or reverse playback is 1 (2x), 2(8x), 3 (20x), 4 (50x), and 5 (100x).

For audio CD, the approximate speed is 1 (2x), 2 (8x),

• and 3 (30x).

For audio CD, fast forward / fast reverse search

• between different tracks are not available during program and random playback.

Slow Forward Playback

1 During playback, press [PAUSE F], then

press [FWD D].

Every time you press [FWD D], playback speed will change.

2 Press [PLAY B] to return to normal

playback.

Note

The approximate speed for the slow forward

• playback is 1(1/16x), 2(1/8x), 3(1/2x).

Only slow forward is available.

• Set “Still Mode” setting to “Field” in “Video” menu if

• pictures in the slow forward playback mode are blurred (refer to page 35).

Step by Step Playback

1 In pause mode, press [PAUSE F]

repeatedly.

Every time you press [PAUSE F], playback will advance one step at a time.

2 Press [PLAY B] to return to normal

playback.

Note

Only step by step forward is available.

• Set “Still Mode” setting to “Field” in “Video” menu if

• pictures in step by step playback mode are blurred (refer to page 35).

Repeat Playback

Available repeat functions vary depending the discs.

1 During playback, press [REPEAT]

repeatedly to select the desired repeat mode.

Repeat mode Available media

Chapter repeat

The current chapter will be played back repeatedly.

Title repeat

The current title will be played back repeatedly.

Track repeat

The current track or file will be played back repeatedly.

Group repeat

The current folder will be played back repeatedly.

All repeat

All tracks in the media will be played back repeatedly.

Introduction

Connections

Playback

Function Setup Others

Note

The repeat setting will be canceled when you stop

• playback.

The chapter, title, track or group repeat will be

• cleared when moving to other chapter, title, track / file or folder.

Repeat playback does not function during A-B repeat

• playback.

Chapter and title repeat are not available with some

• scenes.

Page 26

SPECIAL PLAYBACK

A-B Repeat

You can play back the specific part (between point A and point B) repeatedly.

1 During playback, press [A-B] at the

desired starting point A.

2 During playback, press [A-B] at the

desired ending point B.

As soon as you set the point B, the part between point A and point B will start playback repeatedly.

•

To cancel the A-B repeat, press [A-B] again.

Note

Point B should be set within the same title or track as

• point A.

A-B repeat is not available with some scenes.

• To cancel the A point which was set, press [CLEAR].

• A-B repeat does not function during chapter, title,

• track, group or all repeat playback.

PIP (Picture in Picture) Setting

primary

video

Program Playback

You can play back the disc in your desired order.

1 In stop mode, press [MODE].

The program screen will appear.

•

2 Use [K / L] to select a track / file, then

press [OK].

Program

CD-DA Total 0:09:49

3:40

2:33

2:22

2:28

2:45

3:41

2:58

1 / 3

6 3:41

e.g.) audio CD

•

For JPEG files, use [K / L] to select a folder, then press [OK] first, and then use [K / L] to select a file, then press [OK].

•

Press [CLEAR] to erase the last file of the program.

•

Use [K / L] to select “All Clear” at the bottom of the list to erase all the tracks / files in the program.

•

The programmed tracks / files is displayed in the right hand screen.

•

If the entire program cannot be displayed on the TV screen, “L” or “K” appears.

•

Use [s / B] to go back forward between the hierarchy of folders.

•

If 8 or more tracks / files were set in a program, use [SKIP H / G ] to see all the tracks / files.

3:40

2:28

3:41

1 / 1

3 Press [PLAY B ] to start program

playback.

Program playback will start.

•

secondary

video

1 During playback, press [PIP].

PIP information will appear.

2 Use [K / L] to select the secondary video

you want.

The secondary video will be displayed and the

• secondary audio will be output.

3 Press [RETURN] or [PIP] to remove the PIP

information.

Note

The the secondary audio will not be output when the

• secondary audio is set to “Off” or when “BD Audio Mode” is set to “HD Audio Output”. Refer to “Switching Audio Soundtrack” on page 29 and “Setting the BD Audio Mode” on page 30.

Note

During program playback, press [STOP C ] once to

• set the resume point, and then press [PLAY B ] to resume program playback from where [STOP C ] was pressed (audio CD) or from beginning of the file where [STOP C ] was pressed (JPEG).

During program playback, press [STOP C ] twice to

• display the program screen. To go back to the normal program playback, press [RETURN] to exit from the program screen, then press [PLAY B ].

If you open the disc tray, remove the SD Memory

• Card or turned off the power, the program will be cleared.

Up to 99 tracks / files can be entered.

• To repeat the current track / file in the program,

• press [REPEAT] repeatedly until “ appears during play back. To repeat the entire program, press [REPEAT] repeatedly until “ appears during playback. Playback from a desired track / file and random

• playback are not available during program playback.

Track”

All”

Page 27

SPECIAL PLAYBACK

Random Playback

This function shuffles the playback order of tracks / files.

1 In stop mode, press [MODE] twice.

The random screen will appear.

•

Random

CD-DA Total 0:41:06

Random Program

-- no indication --

e.g.) audio CD

2 Press [PLAY B ] to start random

playback.

Note

During the random playback, press [STOP C ] once

• to set the resume point, and then press [PLAY B ] to resume random playback from where [STOP C ] was pressed (audio CD) or from beginning of the file where [STOP C ] was pressed (JPEG).

During random playback, press [STOP C ] twice to

• display the random playback screen. To cancel the random playback, press [MODE] when the random playback screen is displayed.

To repeat the current track / file in the random

• selection, press [REPEAT] repeatedly until “ Track” appears during playback. To repeat the entire random selection press [REPEAT] repeatedly until “

All” appears during playback.

•

You cannot go back to the previous track / file during random playback.

Camera Angle

Some BD-video and DVD-video contain scenes which have been shot simultaneously from various angles. You

can change the camera angle when screen.

appears on the TV

1 During playback, press [ANGLE].

The selected angle will be displayed on the display

• bar at the top of the TV screen.

2 Use [K / L] to select your desired angle.

1 / 3

Note

If “Angle Icon” setting is “Off” in “Others” menu,

• will not appear. Refer to page 41.

Introduction

Connections

Playback

Function Setup Others

Page 28

Using [SKIP H / G ]

1 During playback, press [SKIP G] to

move to the next track. Press it repeatedly to skip to subsequent tracks. Press [SKIP H ] once to go back to the beginning of the current track. Press it repeatedly to go to the previous tracks.

For JPEG files, press [SKIP H ] to go back to the

• previous file.

Note

For BD and DVD, if title contains no chapters,

• [SKIP H / G ] changes the title.

For JPEG files, [ s / B ] is also available.

•

Using [SEARCH]

By using [SEARCH], you can select following search modes.

Search mode Available media

Chapter / Title search

Track search

Time search

Marker search

1 During playback, press [SEARCH]

repeatedly until your desired search mode appears.

2 Enter the desired chapter, title, track, file

number or time to search for using [the Number buttons].

Chapter, title, track or time search will start.

• Press [CLEAR] to erase an incorrect input.

•

Marker search

■

This feature allows you to assign a specific point on a title or track to be called back later.

1 During playback, press [SEARCH]

repeatedly until the marker setting menu appears.

2 Use [s / B] to select a marker number

(1-9).

___ __ : __ :__

3 When the disc reaches the point at which

you want to set a marker, press [OK].

The title or track and elapsed playback time will

• appear on the TV screen.

4 Press [SEARCH] or [RETURN] to exit. 5 To return to the marker later, call the

marker setting by pressing [SEARCH] repeatedly during playback or in stop mode, and use [s / B] to select a desired marker, then press [OK].

Note

•

Opening the disc tray, turning off the power or selecting “ erase all markers.

•

To clear a marker, use [s / B] to select the marker number to be cleared and press [CLEAR].

•

You can mark up to 9 points. For BD, marker search between different titles is not

• available.

For BD, you can return to the maker only during

• playback.

” at step 2 and pressing [OK] will

Note

During program and random playback, search

• functions are not available except the search using [SKIP H / G ].

Time search is available only in the same track, file or

• title.

For BD, chapter and time search are available only

• during playback.

Page 29

SPECIAL SETTINGS

You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back.

Switching Subtitles

Some BD and DVD may have subtitles in 1 or more languages. For commercially available discs, the supported languages can be found on the disc case. Follow the steps below to switch the subtitle languages during playback.

Switching Audio Soundtrack

Some BD and DVD contain multiple audio streams. Those are often in different audio languages or audio formats. For BD, available audio varies depending on “BD Audio Mode” setting. Refer to page 36 for more information.

1 During playback, press [AUDIO]

1 During playback, press [SUBTITLE]

repeatedly to display “Primary”, “Secondary” or “Subtitle style”.

“Primary”: Sets the subtitle for the primary

”Secondary”: Sets the subtitle for the secondary

“Subtitle Style”: Sets style of the subtitle.

video.

2 Use [K / L] to select your desired subtitle

or style.

Primary / 41JPN

Use [{ / B] to switch between current subtitle

• setting and “Off”.

3 Press [SUBTITLE] repeatedly to exit.

repeatedly to display “Primary” or “Secondary”.

“Primary”: Sets the audio for the primary video. “Secondary”: Sets the audio for the secondary video.

2 Use [K / L] to select your desired audio

stream channel.

Primary / 21 JPN Dolby D 2ch

For “Secondary”, use [{ / B] to switch between

• current audio setting and “Off”.

3 Press [AUDIO] repeatedly to exit.

1 During playback, press [AUDIO]. 2 Use [K / L] to select your desired audio

stream channel.

1 During playback, press [SUBTITLE]. 2 Use [K / L] to select your desired

subtitle.

1 ENG / 4

Use [{ / B] to switch between current subtitle

• setting and “Off”.

3 Press [SUBTITLE] to exit.

1 ENG

e.g.) DVD-video

•

For audio CD, you can select following options.

“Stereo”: “L-ch”: Only left channel is active. “R-ch”: Only right channel is active.

Both right and left channels are active (stereo).

3 Press [AUDIO] to exit.

/ 3Dolby D 3/2.1ch 48k

Introduction

Connections

Playback

Function Setup Others

Note

Some discs will only allow you to change the

• subtitles from the disc menu or pop-up menu. Press [TOP MENU] or [POP MENU / MENU] to display the disc menu or pop-up menu.

If 4-digit-language code appears in the subtitle

• menu, refer to “LANGUAGE CODE” on page 45.

If the disc has no subtitle language or subtitle style,

• “Not Available” will be displayed on the TV screen.

During playback of the secondary video, the primary

• subtitle setting is not available except when there is no subtitle for the secondary video.

Secondary subtitle setting is only available during

• playback of the secondary video.

If you choose a language that has a 3-letter-language

• code, the code will be displayed every time you change the subtitle language setting. If you choose any other Languages, “---” will be displayed instead (refer to page 45).

Note

The secondary audio will not be output when the

• secondary video is not displayed or when “BD Audio Mode” is set to “HD Audio Output”.(For some BD, secondary audio will be output even when secondary video is off.)

•

The sound mode cannot be changed during playback of discs not recorded in multiple audio.

•

Some discs allow to change audio language setting on the disc menu. (Operation varies depending on the discs. Refer to the manual accompanying the disc.)

•

[AUDIO] may not work on some discs with multiple

audio streams or channels (e.g. DVD which allow to change audio setting on the disc menu). If you select a language that has a 3-letter-language code,

• the code will be displayed every time you change the audio language setting. If you select any other languages, “---” will be displayed instead (refer to page 45). If 4-digit-language code appears in the subtitle

• menu, refer to “LANGUAGE CODE” on page 45. If the disc has no audio language, “Not Available” will

• be displayed on the TV screen. For DTS-CD (5.1 music disc), selecting audio streams

• or channels is not available.

Page 30

SPECIAL SETTINGS

Setting the BD Audio Mode

There are 2 ways to set “BD Audio Mode” setting; whether to output the secondary and interactive audio accompanied by the primary audio or only the primary audio. Depending on the setting of the mode, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, or DTS-HD output changes between multi LPCM and bitstream.

1 In stop mode with BD inserted, press

[MODE].

2 Use [K / L] to select your desired setting.

BD Audio Mode Mix Audio Output

“Mix Audio Output”:

If it is available, BD-video’s secondary and interactive audio will be output with the primary audio.

•

The secondary audio is the audio for the secondary video (Director’s comment etc.) and the interactive audio is the audio for the interactive application (Button click sounds etc.).

“HD Audio Output”:

Only the primary audio will be output. Set this mode in order to output Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD audio of BD through HDMI connection.

3 Press [RETURN] to exit.

You can also set “BD Audio Mode” from the setup

• menu. Refer to page 36.

Adjusting the Picture

You can adjust the picture quality.

1 During playback, press [MODE]. 2 Use [K / L] to select your desired item,

then use [s / B] to adjust the setting.

Black Level

Noise Reduction

Black level

■

You can adjust the black level setting to make the black parts of the pictures as bright as you prefer. You can select “On” or “Off”

“On”: Makes the dark parts brighter. “Off”: Shows the original picture as recorded.

■

Noise reduction

Reduces the noise of the playback picture. “1”: Executes MPEG noise reduction which reduces the

block noise and mosquito noise on the subtitle on movie.

“2”: Executes 3D noise reduction which detects and

deletes the noise by comparing each picture frames.

“3”: Executes both MPEG noise reduction and 3D noise

reduction.

Off

3 Press [RETURN] repeatedly to exit.

Note

In “Mix Audio Output” mode, if there is no secondary

• and interactive audio, the audio will be output as “HD Audio Output” mode.

In “Mix Audio Output” mode, even if you set “HDMI

• Multi(Normal)” in “HDMI Audio Out” setting, multi LPCM will be output from HDMI OUT jack for BD audio. Refer to page 14.

In “Mix Audio Output” mode with HDMI audio being

• output, 2-channel down-mixed LPCM will be output from DIGITAL OUT jack for BD audio.

In “Mix Audio Output” mode with “HDMI Audio Out”

• setting set to “Audio Mute” and “Digital Out”setting set to “Bitstream”, DTS, DTS-HD and LPCM will be output as Dolby Digital for BD audio. Refer to pages 14, 16.

You can also set “ BD Audio Mode” setting from the

• setup menu. Refer to page 36.

Note

The setting remains even you turn off the unit.

• For the picture output from HDMI OUT, “Black Level”

• is not effective.

For BD, noise reduction is not effective.

•

Page 31

FUNCTION SETUP

MODE

EAR

BTITL

DISPLAY

Using the Setup Menu

In the setup menu you can change the setting for audio, video, language, etc. You cannot change the setting during playback.

Introduction

Quick

Connections

LEAR

“ Quick” menu contains setting items extracted from “

Custom” menu which may be used frequently.

A-

In stop mode, press [SETUP].

Use [K / L] to select

AUDIO

[OK].

Use [K / L] to select your desired

setting items.

Quick

, then press

Playback

Function Setup

BD Audio Mode HDMI Audio Out HDMI Video Resolution Component Output Player Menu TV Aspect

Follow the procedure below

depending on the setting items.

A) If “ B “ does not appears on the right side

of the setting items when you highlight the items:

Press [OK] repeatedly to change options.

B) If “

“ appears on the right side of the setting items:

1) Press [OK].

items

when you highlight the

Use [K / L] to select options, then press [OK].

Use [s] or [RETURN] to go back to the

• previous screen.

Press [SETUP] to exit.

Mix Audio Output HDMI Multi(Normal) Auto 480i English 16:9 Wide

Others

Page 32

FUNCTION SETUP

MODE

Custom

“

Custom” menu contains all the setting items.

EAR

BTITL

DISPLAY

In stop mode, press [SETUP].

Use [K / L] to select

A-

LEAR

RETURN

AUDIO

[OK].

Use [K / L] to select your desired

setting category, then press [OK].

: Language

: Video

: Audio

: Parental

: Others

•

Parental” menu, follow the procedure

For “ on page 40.

Use [K / L] to select your desired

setting items.

•

The setting items which are not available with current situation of this unit will be displayed in gray and you cannot select them.

Follow the procedure below

depending on the setting items.

, then press

A) If “ B “ does not appears on the right side

of the setting items when you highlight the items:

Press [OK] repeatedly to change options.

B) If “

“ appears on the right side of the setting items:

1) Press [OK].

2) Use [K / L] to select options, then press

items

[OK].

•

Use [s] or [RETURN] to go back to the previous screen.

Press [SETUP] to exit.

when you highlight the

Page 33

■

Language

FUNCTION SETUP

Introduction

Language

Audio Subtitle Disc Menu Player Menu

For how to select the setting items and options, refer to “

•

Original Off English English

Custom” on page 32.

Setting items Options

Audio

Sets the language for audio.

Original* / English / French / Spanish / German / Italian / Swedish / Dutch / Russian / Chinese / Japanese / Korean / Danish / Finnish / Norwegian / Icelandic / Hungarian / Romanian / Turkish / Greek / Irish / Portuguese / Polish / Czech / Slovak / Bulgarian / Other

Subtitle

Sets the language for subtitle.

Off* / English / French / Spanish / German / Italian / Swedish / Dutch / Russian / Chinese / Japanese / Korean / Danish / Finnish / Norwegian / Icelandic / Hungarian / Romanian / Turkish / Greek / Irish / Portuguese / Polish / Czech / Slovak / Bulgarian / Other

Disc Menu

Sets the language for disc menu or pop-up menu.

English* / French / Spanish / German / Italian / Swedish / Dutch / Russian / Chinese / Japanese / Korean / Danish / Finnish / Norwegian / Icelandic / Hungarian / Romanian / Turkish / Greek / Irish / Portuguese / Polish / Czech / Slovak / Bulgarian / Other

Player Menu

English* / Français / Español

Sets the language for OSD (on-screen display).

•

Settings with (*) are the default.

•

“Quick” menu consists of the setting menus frequently used, and they are accompanied with If you select “Other”, enter the 4-digit-number code for the desired language (Refer to “LANGUAGE CODE” on

•

page 45). Only the languages supported by the disc can be selected.

Connections

Playback

Function Setup

Others

Page 34

■

FUNCTION SETUP

Video

TV Aspect HDMI Video Resolution HDMI Deep Color Component Output Progressive Mode Still mode

For how to select the setting items and options, refer to “

•

16:9 Wide Auto Auto 480i Auto Auto

Setting items Options

TV Aspect

Sets the picture size according to aspect ratio of the connected TV.

16:9 Wide*: Select this when a wide-screen TV is connected. Discs recorded in wide-

screen format is played back over the entire TV screen. 4:3 Pan & Scan:

Select this to play back the discs recorded in wide-screen format with 4:3 TV in the pan & scan mode (with the sides of the picture cut off). Discs which are not specified for pan & scan are played back in the letter box mode.

4:3 Letter Box: Select this to play back the discs recorded in wide-screen format with 4:3

TV in the letter box mode. (with black strips at the top and bottom). 16:9 Squeeze:

When playing back 4:3 images, the picture is displayed in the center of the 16:9 screen with a 4:3 aspect ratio.

HDMI Video Resolution

Sets the HDMI video resolution.

Auto*: HDMI video resolution will be selected automatically depending on the

connected HDMI device. 480p 720p 1080i 1080p 1080p24:

Gives a natural and high quality film reproduction of 24-frame film material. The connected TV has to be compatible with 1080p24 frame input.

HDMI Deep Color

Sets whether to output the picture from HDMI OUT jack with Deep Color or not.

Auto*: The picture from HDMI OUT jack will be output with Deep Color to the

connected TV which supports HDMI Deep Color. Off:

The picture from HDMI OUT jack will be output without Deep Color.

Component Output

Sets the video resolution for component output.

480i* 480p 720p 1080i

Progressive Mode

Sets the optimum progressive mode for the image material output from HDMI OUT jack and COMPONENT VIDEO OUT jacks.

Auto*: Suited for playing back video material discs (TV shows or animation).

Video: The progressive mode will detect 24-frame film material (movies) and

automatically select appropriate progressive mode.

Custom” on page 32.

Page 35

FUNCTION SETUP

Setting items Options

Still Mode

Adjusts picture resolution and quality in still mode.

Settings with (*) are the default.

• “Quick” menu consists of the setting menus frequently used, and they are accompanied with

• If you set “HDMI Video Resolution” setting to “1080p24” and the contents of the BD are not compatible for

• 1080p24 frame, 1080p60 frame will be output. An individual picture on the TV screen is called as “Frame” , which consists of two separate images called as

• “Field”. Some pictures may be blurred at the auto setting in “Still Mode” setting due to their data characteristics. If the picture is not output properly to the TV because of “HDMI Video Resolution” or “Component Output”

• setting, press and hold [ B PLAY] on the front panel for more than 5 seconds. Both settings will be reset to the default automatically. If an HDMI cable is connected, for video resolution for the component output, you can only select video

• resolution that currently output from HDMI OUT jack or “480i”. If the video resolution for the component output and HDMI video resolution do not match, the video resolution

• for the component output will be switched to “480i”. COMPONENT VIDEO OUT jacks may not output any signals depending on the disc material. COMPONENT VIDEO OUT jacks may not output any signals when you set “HDMI Deep Color” setting to “Auto”.

• If you play back copy-protected DVD-video, 480p signal will be output from COMPONENT VIDEO OUT jacks,

• when “Component Output” setting is set to “720p” or “1080i”.

Auto*: Automatically selects the best resolution setting (“Frame” or “Field”) based

on the data characteristics of the pictures. Field:

Stabilizes the pictures, although the picture quality may become coarse due to the limited amount of data. Select “Field” when the pictures are still unstable even if “Auto” is selected.

Frame: Displays relatively motionless pictures in higher resolution. “Frame”

improves the picture quality, although it may unstabilize the pictures due to alternate output of 2-field data.

Introduction

Connections

Playback

Function Setup

Others

Page 36

■

FUNCTION SETUP

Audio

BD Audio Mode HDMI Audio Out Down Sampling DRC Virtual Surround

For how to select the setting items and options, refer to “

•

Mix Audio Output HDMI Multi (Normal) On Auto Off

Custom” on page 32.

Setting items Options

BD Audio Mode

For BD, selects whether to output the secondary and interactive audio with primary audio if it is available or only the primary audio. Refer to “Setting the BD Audio Mode” on page 30.

HDMI Audio Out

Sets the audio format for the audio output from HDMI OUT jack.

Mix Audio Output*: Outputs the secondary and interactive audio with primary audio if it is available.

HD Audio Output: Outputs only the primary audio. Set this mode in order to output Dolby

Digital, Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD audio of BD through HDMI connection.

HDMI Multi(Normal)*: The multi-channel audio signals are output from HDMI OUT jack with

bitstream or LPCM. HDMI Multi(LPCM):

The multi-channel audio signals are output from HDMI OUT jack with LPCM.

Refer to pages 37-39 for setting options.•

Audio Mute: Mutes the HDMI audio signal, and set the signal format from DIGITAL OUT jack.

Refer to “Digital out setting” on page 37 for setting options.•

Down Sampling

Sets the digital audio output when playing back BD or DVD recorded in LPCM.

On*: LPCM signals are converted to 48 kHz for output.

Set to “On” when using digital connections to an AV amplifier that is not

• compatible with sampling frequencies of 96 kHz.

Off: For BD and DVD recorded in LPCM without copyright protection, 2-channel

audio signals up to 192 kHz are output as LPCM signals with no conversion.

DRC

Sets whether to compress the range of sound volume (dynamic range control) when Dolby Digital, Dolby Digital Plus or Dolby TrueHD audio is played back.

Virtual Surround

Sets to create a surround effect in a system with 2 speakers connected.

Auto*: When the discs recorded in Dolby TrueHD format are in playback, this unit detects

DRC setting of the disc and set “DRC” setting to “On” or “Off” automatically. Off On

Off*: Virtual surround is set to off.

1: A natural surround effect in a system with 2 speakers connected.

2: A stronger surround effect in a system with 2 speakers connected than “1”.

•

Settings with (*) are the default.

•

“Quick” menu consists of the setting menus frequently used, and they are accompanied with Under following circumstances, “HDMI Multi(Normal)” and “HDMI Multi(LPCM)” are not available.

•

- HDMI cable is not connected to HDMI OUT jack.

- Connected TV is off.

- Connected TV is not compatible with audio output. Set “Virtual Surround” setting to “Off” or lower the volume if the sound is distorted.

• For the virtual surround, audio signal will always be 2-channel LPCM.

•

Page 37

FUNCTION SETUP

Digital out setting

■

When “Audio Mute” is selected in “HDMI Audio Out” setting, HDMI audio signal will be muted and the audio signals output from DIGITAL OUT jack changes depending on “Digital Out” setting.

Quick HDMI Audio Out Audio Mute Digital Out

Bitstream*: When playing back discs recorded in Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD,

the corresponding core stream (Dolby Digital or DTS) are output. LPCM:

LPCM signal will be output from DIGITAL OUT jack.

•

This setting is not effective when the HDMI audio signal is output.

Speaker setting

■

This unit allows you to enjoy multi-channel surround sound such as 7.1-channel / 5.1-channel surround.

Introduction

Connections

Playback

Front speaker (left) Front speaker (right)

Center speaker

Surround speaker (left) Surround speaker (right)

e.g.) basic layout with 7.1-channel surround system

To make the most of its feature, set up your speakers appropriately by referring to the following table. Speaker setting options are available at the following locations; <Speaker setting for the audio signal output from HDMI OUT jack> (Available when you have HDMI cable connected to HDMI OUT jack) Quick HDMI Audio Out Custom

Audio HDMI Audio Out HDMI Multi(LPCM)

HDMI Multi(LPCM)

Subwoofer

Surround back speaker (right)Surround back speaker (left)

Function Setup

Others

Page 38

FUNCTION SETUP

How to navigate through “HDMI Multi(LPCM)”.

1 Use [K / L] to select your desired menu item then press [OK]. 2 Use [K / L] to select your setting items.

Press [RETURN] to go back to the previous screen.

•

3 Use [s / B] to select desired options. (Except for “Test Tone” and “Default”.)

For “Test Tone”: Use [s / B] to select “Off”, “Manual” or “Auto”, then press [OK].

The test tone will be output. If you select “Manual”, use [K / L] to select desired speaker, then use [s / B] to

• adjust the volume. If you select “Auto”, use [s / B] to adjust the volume of the speaker that outputs the test tone. If you want to stop the test tone, press [RETURN].

•

For “Default”: Press [OK] to reset to the default.

4 Press [SETUP] to exit.

Menu Setting items Options Descriptions

Speaker Size

Selects the desired speaker to set. Then change the setting appropriately by referring to the descriptions.

Channel Level

Tests or sets the volume for each speakers.

Front Large* Large:

Small

Center Large*

Small

Subwoofer On

Surround Large*

Small

Surround Back Large*

Small

Default Select “Default”, then press [OK] to reset

Test Tone: “Test Tone” is the

test tone which can be output from the speakers so that you can adjust the volume for each speaker.

Front Lch 0 dB to -12 dB

Center 0 dB to -12 dB

Subwoofer 0 dB to -12 dB

Front Rch 0 dB to -12 dB

Surround Rch 0 dB to -12 dB

Surround Back Rch

Surround Back Lch

Surround Lch 0 dB to -12 dB

Default Select “Default”, then press [OK] to reset

Off* Select “Off” to deactivate “Test Tone”. Manual Auto

(0 dB*)

(0 dB*) 0 dB to -12 dB

(0 dB*)

For the large speakers with strong low frequency reproduction capabilities.

Small: For the small speakers which do not

provide strong bass sound. You cannot change the setting of

“Subwoofer”. If connected device is not compatible with subwoofer, “Subwoofer” will be displayed in gray.

“Speaker Size” setting to the default.

Select “Manual”, then press [OK] to manually set the volume for the desired speaker.

Select “Auto”, then press [OK] to automatically output the test tone from each speakers.

If you have selected “Manual” in “Test Tone”, select the desired speaker to set and adjust the volume for the selected speaker.

If you select “Auto” in “Test Tone”, test tone will automatically be output in order. Adjust the volume of the speaker that outputs the test tone.

“Channel Level” setting to the default.

Page 39

FUNCTION SETUP

Menu Setting items Options Descriptions

Delay Time

This is a parameter for optimizing the timing at which the sound is output from the speakers according to their distance from the listening position.

Settings with (*) are the default.

• For “Speaker Size” setting, the settings of each speaker sizes may be adjusted automatically corresponding to

• each setting. (e.g. If “Front” is set to “Small”, you cannot set “Center”, “Surround”, and “Surround Back” to “Large”.) For “Delay Time” setting, the difference among the value of the each speaker cannot exceed 15 ft (4.5m).

•

Distance Feet* Set the desired measure system. This

Meters

Front

Center

Surround

Surround Back

Default Select “Default”, then press [OK] to reset

0ft to 60ft (12ft*) (0m to 18m (3.6m*))

0ft to 60ft (10ft*) (0m to 18m (3.0m*))

measure system will be used for “Delay Time” setting. Press [OK] to switch

the settings. Select the distance from the listening

position to the speaker to get the ideal delay time.

“Delay Time” setting to the default.

Introduction

Connections

Playback

Function Setup

Others

Page 40

FUNCTION SETUP

Parental

■

Ratings control allows you to set a limit, which prevents your children from viewing inappropriate materials. Playback will be stopped if the ratings exceed the levels you set, and it will require you to enter a password before playing back the disc.

Parental

BD Rating Level DVD Rating Level Password Change

1 Use [K / L] to select

, then press [OK].

ALL ALL

2 Use [the Number buttons] to enter your 4-digit password.

For the first time use: Use [the Number buttons] enter any 4-digit number (except for 4737), then press [OK]. That number will be used as the password from the second time. Record your password in case you forget it.

•

If you forget the password, enter [4], [7], [3], [7]. The password will be cleared and rating level will be set to “All”.

•

While you input the password, press [CLEAR] to clear the number, then re-enter the password.

3 Proceed to A – C

A) BD Rating Level

1) Use [K / L] to select “BD Rating Level”, then press [OK].

2) Use [K / L] to select your desired option, then press [OK].

“All”: To release the limitation. “Age Setting”: To set the age limitation.

•

After selecting “Age Setting”, use [the Number buttons] to enter the age from 0 – 254. (e.g. for age 15, press

[0],[1],[5])

3) Press [SETUP] to exit.

B) DVD Rating Level

1) Use [K / L] to select “DVD Rating Level”, then press [OK].

2) Use [K / L] to select your desired level, then press [OK].

3) Press [SETUP] to exit.

RATING EXPLANATIONS

All : Parental control is inactive; all discs can be played back.

• 8 [Adult] : DVD software of any grades (adult/general/children) can be played back.

• 7 [NC-17] : No one under 17 admitted.

•

6 [R] : Restricted; under 17 requires accompanying parent or adult guardian.

•

5 [PGR] : Parental guidance recommended.

•

4 [PG-13] : Unsuitable for children under 13.

•

3 [PG] : Parental guidance suggested.

•

2 [G] : General audience.

•

1 [Kid Safe] : Suitable for children.

C) Password Change

1) Use [K / L] to select “Password Change”, then press [OK].

2) Enter a new 4-digit password, then press [OK].

3) Press [SETUP] to exit.

Note

The resume information will be cleared if you change the parental level when the resume information is on.•

Page 41

■

Others

FUNCTION SETUP

Introduction

Others

Angle Icon Auto Power Off Panel Display Slide Show Media Select

For how to select the setting items and options, refer to “

•

On On Auto 5sec Disc

Setting items Options

Angle Icon On*:

The angle icon appears on the TV screen when playing back the scene with various angle.

Off: The angle icon disappears on the TV screen.

Auto Power Off On*:

If this unit is left with no activity for more than 30 minutes, this unit turns off automatically.

Off: Sets off the auto power off.

Panel Display

Sets the brightness of the front panel display.

Auto*: Front panel display gets darker during playback.

Bright: Front panel display gets brighter.

Dimmer: Front panel display gets darker.

Slide Show

Sets the display time for the still picture (in JPEG format) playback

Media Select

Selects the media to playback.

5sec*

10sec

Disc*: Select this when you play back a disc.

SD Memory: Select this when you play back an SD Memory Card.

Custom” on page 32.

Connections

Playback

Function Setup

Others

Page 42

FUNCTION SETUP

MODE

Initialize

Initialize the setting or SD Memory Card.

EAR

SETUP

BTITL

DISPLAY

In stop mode, press [SETUP].

Use [K / L] to select , then press

A-

LEAR

AUDIO

[OK].

Use [K / L] to select a desired option,

then press [OK].

“No”: Exits without any initialization. “Setup”: Resets the setup menu to the default. “Memory Device”:

Initializes the SD Memory Card. After

confirmation message appears, use [K / L] to select “Yes”, then press [OK].

Initialize

Initialize? No Setup Memory Device

Press [OK]. (For “Setup” and “

Memory Device” only)

Press [SETUP] to exit.

Note

The setting for “ Parental” will not be reset.

• If SD Memory Card is not inserted, “Memory Device”

• will be displayed in gray.

Page 43

TROUBLESHOOTING

If the unit does not perform properly when operated as instructed in this manual, check the unit, consulting the following checklist.

Problem Solution

No power - Check if the AC cord is properly connected.

- Unplug the AC cord once, and wait for 5-10 seconds and then plug it in again.

No sound or picture - Check if the connected TV is turned on.

- Check if the connections are made securely and correctly.

- Check whether the connected TV or other device supports HDCP. (This unit will not output a video signal unless the other device supports HDCP.)

- Check whether the output format of this unit (HDMI FORMAT) matches the supported input format of other connected device.

- Check if “HDMI Deep Color” setting is set to “Auto”. If it is the case, set it to “Off”.

- Set “HDMI Video Resolution” setting other than “Auto” or “1080p24”.

Distorted picture - Sometimes a small amount of picture distortion may appear.

This is not a malfunction.

- Connect this unit directly to the TV. If the RCA audio / video cables are connected to a VCR, pictures may be distorted due to the copy right protection system.

Completely distorted picture or black / white picture with BD / DVD

No sound or distorted sound - Adjust the volume.

Picture freezes momentarily during playback

Disc cannot be played back - Clean the disc.

SD Memory Card cannot be read. - The format of the card does not match to this unit or the card is not compatible. No return to start-up screen

when disc is removed The unit does not respond to the

remote control

Buttons do not work or the unit stops responding

The unit does not respond to some operating commands during playback

The unit cannot read BD / DVD / CD- Condensation? (Let sit 1 or 2 hours)

Angle does not switch - The angle cannot be switched for BD / DVD which do not contain multiple

Playback does not start when the title is selected

The password for rating level has been forgotten

- Make sure the disc is compatible with this unit.

- Check that the speakers are connected correctly.

- Check the HDMI connections.

- Check the settings in “

- Check the disc for fingerprints / scratches and clean with a soft cloth wiping from center to edge.

- Clean the disc.

- Ensure the disc label is facing up.

- Check if the disc is defective by trying another disc.

- Cancel the ratings control or change the control level.

- Insert a correct disc that can be played back on this unit.

- Reset this unit by turning it off, then on again.

- Aim the remote control directly at infrared sensor window on the front panel.

- Reduce the distance to infrared sensor window.

- Replace the batteries in the remote control.

- Re-insert the batteries with their polarities (+ / - signs) as indicated.

- To completely reset the unit, unplug the AC cord from the AC outlet for 5-10 seconds.

- Operations may not be permitted by the disc.

Refer to the instructions of the disc.

You are attempting to playback a disc other than one with one of the marks on

- page 17.

- Wipe the dirt off the disc or replace the disc.

angles. In some cases multiple angles are only recorded for specific scenes.

- Check the settings in “

- Enter the default password “4737”, then your forgotten password will be cleared.

Audio” menu.

Parental” menu.

Introduction

Connections

Playback Function Setup

Others

Note

Some functions are not available in specific modes, but this is not a malfunction. Read the description in this

• manual for details on correct operations.

Some functions are prohibited on some discs.

•

Page 44

GLOSSARY

Analog Audio

An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also “Digital Audio”.

Aspect Ratio

The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the TV screen is almost square); widescreen models are 16:9 (the TV screen is almost twice as wide as it is high).

BD-Java

With some BD which support Java applications, you can enjoy the interactive functions such as games or interactive menus.

Blu-ray Disc (BD)

Blu-ray Disc is a next generation optical video disc which is capable of storing much more data than a conventional DVD is. The large capacity makes it possible to benefit from the features such as high-definition videos, multichannel surround sounds, interactive menus and so on.

Chapter

Just as a book is split up into several chapters, a title on a BD-video or DVD-video is usually divided into chapters. See also “Title”.

Component Video Output

Each signal of luminance (Y) and component (PB/CB, PR/CR) is independent to output so that you can experience picture color as it is.

Also, due to compatibility with progressive video (525p/480p), you can experience higher-density picture than that in interlace (525i/480i).

Digital Audio

An indirect representation of sound by numbers. During recording, the sound is measured at discrete intervals (44,100 times a second for CD audio) by an analog-todigital converter, generating a stream of numbers. On playback, a digital-to-analog converter generates an analog signal based on these numbers. See also “Sampling Frequency” and “Analog Audio”.

Dolby Digital

The system to compress digital sound developed by Dolby Laboratories. It offers you sound of stereo (2ch) or multi-channel audio.

Dolby Digital Plus

Dolby Digital Plus is the next generation digital audio compression technology developed as an extension to Dolby Digital. Blu-ray Disc supports 7.1 multi-channel surround sound output.

Dolby TrueHD

Dolby TrueHD is a lossless coding technology developed for next generation optical discs. Blu-ray Disc supports 7.1 multi-channel surround sound output.

DTS (Digital Theater System):

DTS is a multi-channel surround sound system. By connecting to DTS decoder, you can enjoy movie dynamic and realistic sound like movie theater. DTS surround sound technologies were developed by DTS, Inc.

DTS-HD

DTS-HD is a lossless coding technology developed as an extension of the original DTS Coherent Acoustics format. Blu-ray Disc supports 7.1 multi-channel surround sound output.

HDMI (high-definition multimedia interface)

A digital interface between audio and video source. It can transmit component video, audio, and control signal with one cable connection.

JPEG (joint photographic experts group)

JPEG is a method of compressing still picture files. You can copy JPEG files on CD-RW/-R, DVD or SD Memory Card from a computer and play back the files in this unit.

PCM (pulse code modulation)

The most common system of encoding digital audio, found on CD and DAT. Excellent quality, but requires a lot of data compared to formats such as Dolby Digital and MPEG audio. For compatibility with digital audio recorders (CD, MD and DAT) and AV amplifiers with digital inputs, this unit can convert Dolby Digital and MPEG audio to PCM. See also “Digital Audio”.

Region Code

Regions associate discs and players with particular areas of the world. This unit will only play back discs that have compatible region codes. You can find the region code of your unit by looking on the rear panel. Some discs are compatible with more than one region (or all regions).

Sampling Frequency

The rate which sound is measured by a specified interval to turn into digital audio data. The numbers of sampling in one second defines as sampling frequency. The higher the rate, the better the sound quality.

Title

A collection of chapters on BD-video or DVD-video. See also “Chapter”.

Track

Audio CD use tracks to divide up the content of a disc. The BD-video or DVD-video equivalent is called a chapter. See also “Chapter”.

Page 45

LANGUAGE CODE

Language Code

A-B

Abkhazian 4748 Afar 4747 Afrikaans 4752 Albanian 6563 Amharic 4759 Arabic Armenian 5471 Assamese 4765 Aymara 4771 Azerbaijani 4772 Bashkir 4847 Basque 5167 Bengali;Bangla 4860 Bhutani 5072 Bihari 4854 Bislama 4855 Breton 4864 Bulgarian [BUL] 4853 Burmese 5971 Byelorussian 4851

C-E

Cambodian 5759 Catalan 4947 Chinese [CHI] 7254 Corsican 4961 Croatian 5464 Czech [CZE] 4965 Danish [DAN] 5047 Dutch [DUT] 6058 English [ENG] 5160 Esperanto 5161 Estonian 5166

F-H

Faroese 5261 Fiji 5256 Finnish [FIN] 5255

4764

Language Code

French [FRE] 5264 Frisian 5271 Galician 5358 Georgian 5747 German [GER] 5051 Greek [GRE] 5158 Greenlandic 5758 Guarani 5360 Gujarati 5367 Hausa 5447 Hebrew 5569 Hindi 5455 Hungarian [HUN] 5467

I-K

Icelandic [ICE] 5565 Indonesian 5560 Interlingua 5547 Interlingue 5551 Inupiak 5557 Irish [IRI] 5347 Italian [ITA] 5566 Japanese [JPN] 5647 Javanese 5669 Kannada 5760 Kashmiri 5765 Kazakh 5757 Kinyarwanda 6469 Kirghiz 5771 Kirundi 6460 Korean [KOR] 5761 Kurdish 5767

L-N

Laothian 5861 Latin 5847 Latvian;Lettish 5868 Lingala 5860 Lithuanian 5866

Language Code

Macedonian 5957 Malagasy 5953 Malay 5965 Malayalam 5958 Maltese 5966 Maori 5955 Marathi 5964 Moldavian 5961 Mongolian 5960 Nauru 6047 Nepali 6051 Norwegian [NOR] 6061

O-R

Occitan 6149 Oriya 6164 Oromo(Afan) 6159 Panjabi 6247 Pashto;Pushto 6265 Persian 5247 Polish [POL] 6258 Portuguese [POR] 6266 Quechua 6367 Rhaeto-Romance 6459 Romanian [RUM] 6461 Russian [RUS] 6467

Samoan 6559 Sangho 6553 Sanskrit 6547 Scots Gaelic 5350 Serbian 6564 Serbo-Croatian 6554 Sesotho 6566 Setswana 6660 Shona 6560 Sindhi 6550 Singhalese 6555

Language Code

Siswat 6565 Slovak [SLO] 6557 Slovenian 6558 Somali 6561 Spanish [SPA] 5165 Sundanese 6567 Swahili 6569 Swedish [SWE] 6568

Tagalog 6658 Tajik 6653 Tamil 6647 Tatar 6666 Telugu 6651 Thai 6654 Tibetan 4861 Tigrinya 6655 Tonga 6661 Tsonga 6665 Turkish [TUR] 6664 Turkmen Twi 6669

U-Z

Ukrainian 6757 Urdu 6764 Uzbek 6772 Vietnamese 6855 Volapuk 6861 Welsh 4971 Wolof 6961 Xhosa 7054 Yiddish 5655 Yoruba 7161 Zulu 7267

6657

Introduction

Connections

Playback Function Setup

Others

Note

If you choose a language that has a 3-letter-language code (written in bracket), the code will be displayed every

• time you change the audio or subtitle language setting on page 29. If you choose any other languages, ‘---’ will be displayed instead.

Page 46

SPECIFICATIONS

General

Media BD-video, DVD-video, DVD+RW/+R, CD-DA, CD-RW/-R, DTS-CD Power requirements 120V AC, 60Hz Power consumption 30W (standby: 0.8W) Dimensions (width x height x depth) 17.2 x 2.8 x 13.9 inches (435 x 70 x 351mm) Weight 9.1 lbs. ( 4.1kg ) Operating temperature 41°F (5°C) to 104°F (40°C) Operating humidity Less than 80% (no condensation)

Terminals

Audio output (Analog)

RCA jack x 2 L/R: 2Vrms (output impedance: more than 1kΩ)

Video output

RCA jack x 1 1Vp-p (75Ω)

Component video output

Rear

RCA jack x 3 Y: 1Vp-p (75Ω) P

Audio output (Digital)

RCA jack x 1 500mVp-p (75Ω)

HDMI output

HDMI jack x 1 Video: 480p, 720p, 1080i, 1080p, 1080p24 / Audio

Note

The specifications and design of this product are subject to change without notice.•

B/CB: 700mVp-p (75Ω) PR/CR: 700mVp-p (75Ω)

Page 47

MEMO

Introduction

Connections

Playback Function Setup

Others

Page 48

LIMITED WARRANTY

FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows:

DURATION:

PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year

from the date of original retail purchase. Certain parts are excluded from this warranty.

LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the

date of original retail purchase.

LIMITS AND EXCLUSIONS:

THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.

This warranty shall not be extended to any other person or transferee. This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced,

missing or if service was attempted by an unauthorized service center. This limited warranty does not apply to any product not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occur during normal use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or products not supplied by FUNAI CORP., or damage, which results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product, or damage which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES.

ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER. THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.

THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIR COSTS WILL BE CHARGED.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE.

WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:

To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI CORP. will not reimburse you for any service done by unauthorized service providers without prior written approval.

To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please contact us at:

Printed in China

FUNAI CORPORATION

Customer Service

Tel : 1-800-605-8610

www.funai-corp.com

19900 Van Ness Avenue, Torrance, CA 90501

E5E20UD / E5H20UD

1VMN25073 ★★★★★

Page 49

1. Connections

Follow to the back side of this sheet.

NB500MG9

Blu-ray Disc Player

This unit is compatible to play back the following discs / files.

Playable discs Logos

Blu-ray Disc

- BD-video (single / double layer)

- BD-RE ver.2.1 (single / double layer) (Recorded in BDMV format)

- BD-R (single / double layer) (Recorded in BDMV format) (Unclosed discs may not be played back.)

DVD-video

DVD+RW (single layer)

DVD+R (single / double layer)

CD-DA (audio CD)

CD-RW

CD-R

Kodak Picture CD

DTS-CD

Playable files Logos

JPEG

SD Memory Card (including SDHC), miniSD Card, microSD Card

Readable cards Playable files / data

SD Memory Card (8MB - 2GB)

JPEG, picture-in-picture commentary, subtitles or other extras for BD-ROM Profile 1 ver.1.1

SDHC Memory Card (4GB)

miniSD Card (8MB - 2GB)

microSD Card (8MB - 2GB)

For miniSD Card and microSD Card, the adapter is necessary.

microSD Card adapter

microSD Card

•

BD-videoDVD-video

AUDIO/VIDEO CONNECTION

Press [HDMI] to change the resolution of the video signal being output from HDMI OUT jack. The video resolution changes as follows every time [HDMI] is pressed.

480p 720p 1080i 1080p 1080p24

Note :

• You cannot select the video resolutions which are not supported by the connected TV.

• In order to get natural and high quality film reproduction of 24-frame film material, use an HDMI cable (High Speed HDMI Cable is recommended) and select “1080p24” if the connected TV is compatible with 1080p24 frame input.

Supplied cables used in this connection are as follows:

RCA audio cable (L/R) x 1 RCA video cable x 1

Please purchase the rest of the necessary cables at your local store.

•

E5E20UD / E5H20UD

1VMN25074 / ★★★★★

Printed in China

“Blu-ray Disc“ and are trademarks.

is a trademark of DVD Format/Logo Licensing Corporation.

Make one of the following connections, depending on the capabilities of your existing device.

AUDIO IN

this unit

and

RCA

audio cable

RCA video cable

RCA component

video cable

Method 2

COMPONENT VIDEO OUT

Method 1

VIDEO OUTAUDIO OUT

Method 3

HDMI OUT

HDMI-DVI cable

AUDIO CONNECTION

VIDEO CONNECTION

or or

(Red)

(Blue)

(Green)

(Red)

(Blue)

(Green)

Playable Discs and Files

Region Codes

HDMI Connection

Basic Connections

All devices should be turned off and disconnected from the power outlet, when you make the connections.

HDMI cable

Method 4

this unit TV

BEST

PICTURE

BETTER

PICTURE

STANDARD

PICTURE

STANDARD

AUDIO

Quick Start Guide

BEST

AUDIO /

PICTURE

Quick Start GuideQuick Start Guide

EN EN

miniSD Card adapter

miniSD Card

VIDEO

OUT

COMPONENT

VIDEO IN

PB/CB

PR/CR

COMPONENT

VIDEO OUT

PR/CRY

PB/C

DVI IN

HDMI IN

Page 50

2-Channel Analog Audio Connection

Digital Audio Connection

AV receiver/ampli er

DIGITAL OUT (COAXIAL)

digital audio coaxial input jack

digital audio coaxial cable

audio

this unit

After you made all necessary connections, connect the AC cord to the AC IN. Then connect the AC cord to the AC outlet.

Insert the plugs securely. Incomplete connections will result in the generation of noise.

this unit

AC outlet

AC cord

AC 120V, 60 Hz

Turn on the TV and select the appropriate input on the TV to which the unit is connected.

Press [OPEN / CLOSE A ] to close the disc tray.

It may take a while to load the disc.

Some discs may start playback automatically.

Press [ y STANDBY-ON]

Press [OPEN / CLOSE A ] to open the disc tray.

Place the disc on the disc tray with its label side facing up.

Align the disc to the disc tray guide.

Press [PLAY B] to start playback.

For many of BD-video and DVD-video, a menu screen may appear.

In this case, use [K / L / s / B] to select the desired item, then press [OK].

To pause playback: Press [PAUSE F ]. To return to normal playback: Press [PLAY B ]. To stop playback: Press [STOP C ]. To eject the disc:

Press [OPEN / CLOSE A ] to open the disc tray, then remove the disc before turning off the unit.

MODE

2. Playback1. Connections (cont'd)

Connection to an Audio System

Connecting the AC Cord

stereo system

AUDI O

OUT

AUDIO IN

analog audio input jacks

RCA audio cable

AUDIO OUT

audio

this unit

Supplied cables used in this connection are as follows:

RCA audio cable (L/R) x 1

Please purchase the rest of the necessary cables at your local store.

•

Supplied cables used in this connection are as follows:

AC cord x 1•

BETTER

AUDIO

STANDARD

AUDIO

EN EN

STANDBY-ON

EAR

DISPLAY

OPEN/ CLOSE

A-

LEAR

DIGITAL AUDIO INPUT

COAXIAL

BTITL

AUDIO

Magnavox NB500MG9 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual