Magnavox MWD2206A User Manual

AC
outlets

Plug in

4

5

From TV

From DVD/VCR

Please refer to “Connections” on page 6.

Cable TV

signal

ANT-OUT

ANT-IN

RF cable (supplied)

(Back of DVD/VCR)

(Back of TV)

or

Antenna

2

Connect

3

Connect

(Back of TV)

or

Disconnect

Antenna

Cable TV

signal

Owner's Manual

Owner’s Manual

Please read before using this unit.

DVD/CD Player with Video Cassette Recorder

MWD2206A

If you need additional operating assistance

after reading this owner’s manual, please call

TOLL FREE : 1-800-605-8610

or visit our web site at

http://www.funai-corp.com

Table of Contents

Precautions

Laser Safety ................................................................................ 2

■ Important Safeguards ................................................................ 3

Location and Handling ................................................................ 4

Avoid the Hazards of Electrical Shock and Fire .......................... 4

Moisture Condensation Warning ................................................. 4

About Copyright .......................................................................... 4

Symbols Used in This Manual ..................................................... 4

Maintenance ................................................................................ 4

■ About the Video Cassettes and Discs ..................................... 5

Playable Video Cassettes ........................................................... 5

Playable Discs ............................................................................. 5

Unplayable Discs ........................................................................ 5

Setup

■ Connections ............................................................................... 6

RF Output Channel ..................................................................... 6

Hint for Cable Box or Satellite Box .............................................. 6

Connection to an Audio System .................................................. 6

Connection to a TV ..................................................................... 7

■ Preparation for Use ................................................................... 8

Turn On the Unit for the First Time ............................................. 8

To Add or Delete Channels ......................................................... 8

Clock Setup ................................................................................. 8

■ Function Overview ..................................................................... 9

Front Panel Indicator ................................................................... 9

VCR / DVD Switching .................................................................. 9

Front & Rear Terminals ............................................................... 9

Remote Control ......................................................................... 10

Installing the Batteries for the Remote Control ......................... 10

VCR Functions

■ Playback ................................................................................... 11

■ Other Operations ..................................................................... 11

Index Search ............................................................................. 11

Time Search .............................................................................. 11

Auto Repeat .............................................................................. 12

Supplied Accessories

Remote control (NB179UD)
with two AA batteries

Audio/Video cables
(WPZ0102TM015 /
WPZ0102LTE01)

■ Recording ................................................................................. 12

Recording & OTR (One Touch Recording) ...............................12

Timer Recording ........................................................................ 12

Hints for OTR and Timer Recording .......................................... 13

Copying a Video Tape ............................................................... 14

DVD Functions

■ Playback ................................................................................... 15

■ On-Screen Display ................................................................... 16

■ Search Functions ..................................................................... 17

Using Track Search ................................................................... 17

Using Title / Chapter Search ..................................................... 17

Using Time Search .................................................................... 17

Marker Setup ............................................................................. 17

■ Repeat / Random / Programmed Playback ............................ 18

Repeat Playback / Repeat A-B Playback

Random Playback / Programmed Playback .............................. 18

■ Special Settings ....................................................................... 19

Subtitle Language / Audio Language / Camera Angle

Black Level Setting / Stereo Sound Mode / Virtual Surround .... 19

■ DVD Setup ................................................................................ 20

LANGUAGE Setting .................................................................. 20

DISPLAY Setting ....................................................................... 21

AUDIO Setting ........................................................................... 21

PARENTAL Setting ................................................................... 22

OTHERS Setting ....................................................................... 22

Reset to the Default Setting (Except for PARENTAL Setting) .. 23

Information

■ Troubleshooting Guide ........................................................... 23

■ Specifi cations .......................................................................... 24

■ Language Code List ................................................................ 24

■ Limited Warranty ..................................................................... 24

■ Español ..................................................................................... 25

■ Quick Use Guide ...................................................................... 27

INSTRUCCIONES EN
ESPAÑOL INCLUIDAS.

RF cable
(WPZ0901TM002)

PrecautionsSetupVCR FunctionsDVD FunctionsEspañol Information

Owner’s Manual
(1VMN22563)

Basic TV Connection

Precautions

WARNING

Precautions

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.

: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

:

The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous volt­age” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.

The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.

Laser Safety

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to
possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED

CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO

LOCATION: INSIDE, NEAR THE DECK MECHANISM.

HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

BEAM.

FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications

to this equipment may cause harmful interference unless the modifications are expressly approved in the
manual. The user could lose the authority to operate this equipment if an unauthorized change or modifica­tion is made.

RADIO-TV INTERFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and receiver.

3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE

DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

A NOTE ABOUT RECYCLING

This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your
local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning
chemical wastes.

Make your contribution to the environment!!!

• Used up batteries do not belong in the dust bin.

• You can dispose of them at a collection point for used up batteries or special wastes.
Contact your council for details.

For Customer Use:
Read carefully the information located at the back of this unit and enter below the Model No. and the Serial No. Retain this
information for future reference.

Model No. ____________________
Serial No. ____________________

–

–

2

EN

FIGURE A

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL ELECTRICAL CODE

ANTENNA
LEAD
WIRE

ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)

GROUNDING CONDUCTORS
(NEC SECTION 810-21)

GROUND
CLAMP

GROUND CLAMP

ELECTRIC
SERVICE
EQUIPMENT

POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)

NEC – NATIONAL ELECTRICAL CODE

S2898A

IMPORTANT SAFEGUARDS

1. Read Instructions - All the safety and operating instruc­tions should be read before the appliance is operated.

2. Retain Instructions- The safety and operating instructions
should be retained for future reference.

3. Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.

4. Follow Instructions - All operating and use instructions
should be followed.

5. Cleaning - Unplug this video product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted
service and, that for some specific reason, such as the
possibility of the loss of an authorization code for a CATV
converter, is not intended to be unplugged by the user for
cleaning or any other purpose, may exclude the reference
to unplugging the appliance in the cleaning description
otherwise required in item 5.

6. Attachments - Do not use attachments not recommended
by the video product manufacturer as they may cause
hazards.

7. Water and Moisture- Do not use this video product near
water, for example, near a bath tub, wash bowl, kitchen
sink, or laundry tub, in a wet basement, or near a
swimming pool, and the like.

8. Accessories - Do not place this video product on an
unstable cart, stand, tripod, bracket, or table. The video
product may fall, causing serious injury to a child or adult,
and serious damage to the appliance. Use only with a
cart, stand, tripod, bracket, or table recommended by the
manufacturer, or sold with the video product. Any mount­ing of the appliance should follow the
manufacturer's instructions and should
use a mounting accessory recommended
by the manufacturer. An appliance and
cart combination should be moved with
care. Quick stops, excessive force, and
uneven surfaces may cause the appli­ance and cart combination to overturn.

9. Ventilation - Slots and openings in the cabinet are pro

­vided for ventilation and to ensure reliable operation of
the video product and to protect it from overheating, and
these openings must not be blocked or covered. The
openings should never be blocked by placing the video
product on a bed, sofa, rug, or other similar surface. This
video product should not be placed in a built-in installa­tion such as a bookcase or rack unless proper ventilation
is provided or the manufacturer's instructions have been
adhered to.

10. Power Sources - This video product should be operated
only from the type of power source indicated on the
marking label. If you are not sure of the type of power
supply to your home, consult your appliance dealer or
local power company. For products intended to operate
from battery power, or other sources, refer to the
operating instructions.

11. Grounding or Polarization - This video product is
equipped with a polarized alternating-current line plug (a
plug having one blade wider than the other). This plug
will fit into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should still fail to
fit, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.

12. Power Cord Protection - Power supply cords should
be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience recep­tacles, and the point where they exit from the appliance.

13. Outdoor Antenna Grounding - If an outside antenna or
cable system is connected to the video product, be sure
the antenna or cable system is grounded so as to provide
some protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code, ANSI/
NFPA No. 70, provides information with regard to proper

–

grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements for
the grounding electrode. (Fig. A)

14. Lightning - For added protection for this video product
during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This
will prevent damage to the video product due to lightning
and power-line surges.

15. Power Lines - An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact with
them might be fatal.

16. Overloading - Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.

17. Object and Liquid Entry - Never push objects of any kind
into this video product through any openings as they may
touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liquid of
any kind on the video product.

18. Servicing - Do not attempt to service this video product
yourself as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all servicing
to qualified service personnel.

19. Damage Requiring Service - Unplug this video product
from the wall outlet and refer servicing to qualified service
personnel under the following conditions:

a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the

c. If the video product has been exposed to rain or water.
d. If the video product does not operate normally by

e. If the video product has been dropped or damaged in

f. When the video product exhibits a distinct change in

20. Replacement Parts - When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer or have
the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other
hazards.

21. Safety Check - Upon completion of any service or repairs
to this video product, ask the service technician to per­form safety checks to determine that the video product is
in proper operating condition.

22. Heat - This video product should be situated away from
heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.

–

3

Precautions

video product.

following the operating instructions. Adjust only those
controls that are covered by the operating instructions
as an improper adjustment of other controls may result
in damage and will often require extensive work by a
qualified technician to restore the video product to its
normal operation.

any way.

performance this indicates a need for service.

EN

Location and Handling

•

Do not stand this unit up vertically. Install this unit in a hori­zontal and stable position. Do not place anything directly on
top of this unit. Do not place this unit directly on top of the TV.

• Depending on the TV, noise or disturbance of the picture
and/or sound may be generated if this unit is placed too
close to your TV. In this case, please ensure enough space

Precautions

between your TV and this unit.

• Do not cover or place this unit in enclosed spaces to prevent
excessive temperature build up.

•

Do not place this unit in direct sunlight, or near heat sources.

• Depending on the environment, the temperature of this unit
may increase slightly. This is not a malfunction.

• Keep this unit away from strong magnetic objects.

• Do not place any object containing water or other liquids on
this unit. In the event that liquid should enter the cabinet,
unplug this unit immediately and contact the retailer or an
Authorized Service Center immediately.

• Do not remove this unit cabinet. Touching parts inside the
cabinet could result in electric shock and/or damage to this
unit. For service and adjustment inside the cabinet, call a
qualified dealer or an Authorized Service Center.

• Be sure to remove disc and video tape and unplug the AC
power cord from the output before carrying this unit.

Avoid the Hazards of Electrical Shock and Fire

• Do not handle the power cord with wet hands.

• Do not pull on the power cord when disconnecting it from
AC wall outlet. Grasp it by the plug.

• If, by accident, water is spilled on this unit, unplug the power
cord immediately and take the unit to our Authorized Service
Center for servicing.

•

Do not put your fingers or objects into the unit cassette holder.

Moisture Condensation Warning

Moisture may form inside this unit under the following condi­tions:

• Immediately after a heater is turned on.

• In a steamy or humid room.

• When this unit is suddenly moved from a cold to warm envi­ronment.

If moisture forms inside this unit, it may not operate
properly or damage the video tape. In such case, turn on
the power and wait for more than 2 hours for the moisture to
evaporate.

About Copyright

Unauthorized copying, broadcasting, public performance and
lending of discs are prohibited.
This product incorporates copyright protection technology that
is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be
authorized by Macrovision, and is intended for home and
other limited viewing uses only unless otherwise authorized by
Macrovision. Reverse engineering or disassembly is
prohibited.

Note to CATV system installer

This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground should be
connected to the grounding system of the building,
as close to the point of cable entry as practical.

Symbols Used in This Manual

The following symbols appear in some headings in this
manual.

: Description refers to playback or recording of

video cassette tapes.

:

Description refers to playback of DVD-Video discs.

: Description refers to playback of Audio CDs.

Maintenance

SERVICING

• Please refer to relevant topics on the “Troubleshooting
Guide” on page 23 before returning the product.

• If this unit becomes inoperative, do not try to correct the
problem by yourself. There are no user-serviceable parts
inside. Turn off, unplug the power plug, and please call
our help line mentioned on the front page to locate an
Authorized Service Center.

CLEANING THE CABINET

• Use a soft cloth slightly moistened with a mild detergent
solution. Do not use a solution containing alcohol, spirits,
ammonia or abrasive.

CLEANING DISCS

• When a disc becomes dirty, clean it with a cleaning cloth.
Wipe the disc from the center to out. Do not wipe in a circu­lar motion.

•

Do not use solvents such as benzine, thinner, commercially avail­able cleaners, detergent, abrasive cleaning agents or antistatic
spray intended for analog records.

CLEANING THE DISC LENS

• If this unit still does not perform properly although you refer
to the relevant sections and to “Troubleshooting Guide” in
this Owner’s Manual, the laser optical pickup unit may be
dirty. Consult your dealer or an Authorized Service Center
for inspection and cleaning of the laser optical pickup unit.

DISC HANDLING

• When you handle a disc, hold it by its edge and try not to
touch the surface of the disc.

• Always store the disc in its protective case when it is not
used.

AUTO HEAD CLEANING

• Automatically cleans video heads as you insert or remove a
cassette, so you can see a clear picture.

• Playback picture may become blurred or interrupted while
the TV program reception is clear. Dirt accumulated on the
video heads after a long period of use, or the usage of rental
or worn tapes can cause this problem. If a streaky or snowy
picture appears during playback, the video heads in your
unit may need to be cleaned.

1. Please visit your local Audio/Video store and purchase a

good quality VHS Video Head Cleaner.

2. If a Video Head Cleaner does not solve the problem,

please call our help line mentioned on the front page to
locate an Authorized Service Center.

Hint

•

Remember to read the instructions along with the video head cleaner before use.

• Clean video heads only when problems occur.

Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.

–

–

4

EN

About the Video Cassettes and Discs

or

Example

Title 1 Title 2

Chapter 1 Chapter 2 Chapter 1

Chapter 2

Chapter 3 Chapter 4

Example

Track 1 Track 2 Track 5

Track 6

Track 3

Track 4

is a trademark of DVD Format/Logo Licensing Corporation.

Playable Video Cassettes

Use only cassettes marked with this unit.

Playable Discs

Playable

discs

DVD-Video

*1, 2, 3, 5, 9

DVD-RW

DVD-R

*1, 3, 4, 5, 6,

8, 9, 10

DVD+RW

DVD+R

*1, 3, 4, 5, 7,

8, 9, 10

Audio CD

*3, 5, 9

CD-RW

CD-R

*3, 4, 5, 8, 9

Mark (logo) Region code

Recorded

signals

Digital video

(MPEG2)

Digital audio

Disc size Disc types

12 cm

or

8 cm

12 cm

or

8 cm

If you cannot play back a disc which bears one of the marks above, check the following notes.

*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back.
*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc’s producers.
*3: Scratched or stained discs may not be played back.
*4: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or spe-

cial properties of discs.

*5: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not play them

back. Even if they are played back, the sound or video quality will be compromised.

*6: You may play back the unfinalized DVD-R/RW disc recorded in the video format on our brand’s DVD recorder. However,

depending on the recording status of a disc, the disc may not be played back at all or normally (the picture or sound may
not be smooth, etc.). In this case, you need to finalize the disc with the DVD recorder. Refer to the manual accompanying
the DVD recorder.

*7: Only the discs recorded in the video format and finalized can be played back.

Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be played back at
all the picture or sound may not be smooth, etc.

*8:

If the recorded portion of the disc is too small (less than 2 3/16 inches (55 mm) across), it may not play back properly.
*9: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly.
*10: Discs Recorded in the VR (Video Recording) format cannot be played back.

Precautions

Unplayable Discs

NEVER play back the following discs. Otherwise, malfunction may result!

DVD-RAM / DVD-Audio / CD-i / Photo CD / Video CD / DVD with region codes other than 1 or ALL / DVD-ROM for personal
computers / CD-ROM for personal computers

On the following disc, the sound MAY NOT be heard.

Super Audio CD
NOTE: Only the sound recorded on the normal CD layer can be delivered.The sound recorded on the high density Super Audio

CD layer cannot be delivered.

Any other discs without compatibility indications

–

5

–

EN

L R

VCRDVD/VCR

AUDIO OUT

L

R

DIGITAL

AUDIO OUT

or

AUDIO

OUT

DVD

S-VIDEO

OUT

COMPONENT

VIDEO OUT

L

R

Setup

ANT-OUT

ANT-IN

RF cable

(supplied)

(Back of DVD/VCR)

IN

O

U

T

(Back of TV)

Satellite or

Cable TV

signal

(Cable box or

Satellite box)

DIGITAL

AUDIO OUT

COAXIAL

AUDIO

OUT

DVD

S-VIDEO

OUT

COMPONENT

VIDEO OUT

COAXIAL

Connections

Please refer to “Basic TV Connection” on the front page before you use this unit.

RF Output Channel

If channel 3 has been already occupied
for broadcasting,

1) Set your TV to channel 4.

2) Insert a pre-recorded tape into this unit.

3) Press [SOURCE] on the unit so that the

VCR OUTPUT light is lit.

•

If noise appears on the TV screen, press
[VCR/TV] on the remote control.

4) Press [PLAY B] once.

5) After a few seconds, press and hold

[PLAY B] on the unit for 3 seconds.

• The RF output channel will change to
channel 4 from channel 3 and you will
see a playback picture.

• When a picture does not appear on the
TV screen, repeat step 4.

6) Press [STOP C] to stop playback.

Hint

• The RF output channel does not
change when you adjust tracking
during playback. In this case, stop the
playback, and start the playback again.
After that, press and hold [PLAY B]
on the unit for 3 seconds again.

Setup

Hint for Cable Box or Satellite Box

Select this connection when you want to view or record a
scrambled channel. With this connection, channels cannot be
changed on the unit. You can view or record ONLY
the channels you have selected on the cable box or the
satellite box.

•

While you are recording, only the recorded channel can be viewed.

Connection to an Audio System

Method 1

Audio

Stereo system

Analog audio
input jacks

Audio cable

(supplied)

AUDIO OUT
(Analog)

DVD/VCR

(DVD mode only)

Hint

• Playing a DVD using incorrect settings may generate noise distortion and may
also damage the speaker.

To select channels of the cable box or satellite box

1) Turn on the unit by pressing [STANDBY-ON], then press
[VCR/TV]. The POWER ON indicator on the front panel

will light, then press [SKIP/CH. G/K, H/L] to select
channel 3 or 4 (the same channel as the output channel of
the cable box or satellite box).

• If you use the channel 4, you need to change the unit’s

RF output to channel 4. Refer to “RF Output Channel”.

2) At the TV, select channel 3 or 4 (the same channel as you
have selected at step 1).

3) On the cable box or satellite box, select the channel you
want to view or record.

Method 2

Dolby Digital decoder,

MD deck or DAT deck

Digital audio
input jack

Audio Coaxial

Digital cable

(commercially

available)

DIGITAL
AUDIO OUT

Connection

Setting

Connecting to a Dolby Digital decod­er for Dolby Digital audio output.

Connecting to the other equipment
(an MD deck or DAT deck etc.) with­out Dolby Digital decoder.

* To complete these settings, refer to pages 20-21.

SETUP > QUICK>

DOLBY DIGITAL

BITSTREAM

PCM

Hint

• The audio source on a disc in a Dolby Digital 5.1 channel surround format can­not be recorded as digital sound by an MD or DAT deck.

• By hooking this unit up to a 5.1 channel Dolby Digital decoder, you can enjoy
high-quality Dolby Digital 5.1 channel surround sound as heard in the movie
theaters.

• Playing a DVD using incorrect settings may generate noise distortion and may
also damage the speakers.

–

–

6

EN

DIGITAL

AUDIO OUT

COAXIAL

ANT-OUT

ANT-IN

AUDIO

OUT

DVD VCR

DVD/VCR

S-VIDEO

OUT

COMPONENT
VIDEO OUT

AUDIO IN

VIDEO IN

AUDIO OUT

VIDEO OUT

L

LY

C

B

C

R

R

R

AUDIO IN

L R

VCRDVD/VCR

AUDIO OUT

L

R

DIGITAL

AUDIO OUT

AUDIO

OUT

DVD

S-VIDEO

OUT

COMPONENT
VIDEO OUT

L

R

Y

CB/
PB

CR/
PR

or

VIDEO IN

VCRDVD/VCR

VIDEO OUT

S-VIDEO IN

DIGITAL

AUDIO OUT

COAXIAL

AUDIO

OUT

DVD

S-VIDEO

OUT

COMPONENT

VIDEO OUT

DIGITAL

AUDIO OUT

C

B

Y

C

R

COMPONENT

VIDEO IN

COAXIAL

AUDIO

OUT

DVD

S-VIDEO

OUT

COMPONENT

VIDEO OUT

Y

C

B

C

R

Connection to a TV

TV

Basic Audio

Method 1

Good picture

Method 2

Better picture

Method 3

Best picture

Audio cable

DVD/VCR

(supplied)

Video cable

(supplied)

S-Video cable
(commercially

available)

Component Video cable
(commercially available)

AUDIO OUT

(Analog)

VIDEO OUT

S-VIDEO OUT

COMPONENT VIDEO OUT

Hint

• Connect this unit directly to the TV. If the Audio/Video cables are connected to a VCR, pictures may be distorted due to the copy protection system.

• The COAXIAL, DVD AUDIO OUT, S-VIDEO OUT and COMPONENT VIDEO OUT jacks are only useful in DVD mode.

After you have completed connections

Press the input selector button (usually TV/VIDEO, INPUT or AUX) on your TV to switch an appropriate external input channel
(usually near channel 0) for viewing the picture from this unit. If the picture does not appear, also refer to the manual accompa­nying your TV.

INPUT MODES FOR COMMON TV BRANDS

Listed below are inputs for common brand name TV’s.

Setup

Admiral: AUX
Curtis Mathis: LINE1, LINE2, 00, 90, 91, 92, 93
GE: INPUT, TV/VCR, 00, 90, 91, 92, 93
Hitachi: INPUT, AUX
JVC: VIDEO, VIDEO1, VIDEO2, VIDEO3
Kenwood: AUX
LXI-Series: 00
Magnavox: AUX CHANNEL

Panasonic: TV/VIDEO
RCA: INPUT, TV/VCR, 00, 90, 91, 92, 93
Samsung: TV/VIDEO
Sanyo: VIDEO
Sharp: 00
Sony: VIDEO1, VIDEO2, VIDEO3
Toshiba: TV/GAME
Zenith: 00

–

–

7

EN

STANDBY-ON

CLEAR/

C. RESET

Preparation for Use

MENU

MENU

VCR

VCR

VCR

Turn On the Unit for the First Time

Operation described in this manual are

Turn on the TV and set it to channel 3.

1

• If channel 3 has been already occupied for broadcasting,
see “RF Output Channel” section on page 6.

Select your language in the first time you turn on this unit.

2

Then press [B] to go to next step.

Press [B] to start Auto Set Up.

3

mainly based on the remote control.

or

Setup

Do you connect the cable from the cable box or the satellite box to the unit’s
ANT-IN jack?

YES

Yes Press [MENU] to exit.

• Refer to “Hint for Cable Box or Satellite Box” section on page 6.

No

Please wait for a few minutes.

• The tuner stops on the lowest memorized channel.

• You can select only the channels memorized in this unit by using

[SKIP/CH. G///K, H//L] (or [CHANNEL K///L]).

• If “AUTO SET UP” appears on the TV screen again, check the cable

connections. Then, press [B] once again.

Hint

• Repeat these steps only if either there was a power failure or this unit has been
unplugged for more than 30 seconds.

To Select a Channel

You can select a channel by using the Number buttons or
[

SKIP/CH. G/K, H/

Notes for using the Number buttons:

• When selecting cable channels which are higher than 99,
enter channel numbers as a three-digit number. (for exam­ple: 117, press [1], [1], [7])

• You must precede single-digit channel numbers with a zero.
(for example: 02, 03, 04 and so on)

To Add or Delete Channels

L].

After scanning...

LANGUAGE SELECT

B ENGLISH [ON]
FRANCAIS
ESPAÑOL

CH 01

AUTO SET UP

NO

To Preset the Channel Again

1) Press [MENU] until the main menu appears.

2)

Select “CHANNEL SET UP” by using

3)

Select “AUTO SET UP” by using [K//L], then press [B]. After

[K//L]

, then press

scanning, the tuner stops on the lowest memorized channel.

To Change the On-Screen Language

1)

Press

[MENU]

until the main menu appears.

2) Select “LANGUAGE SELECT” by using [K/L], then
press [B].

3) Select “ENGLISH” , “FRANCAIS” or “ESPAÑOL” by
using [K/L] then press [CLEAR/C.RESET].

Hint

• If you accidentally select Spanish or French and need English: Press [MENU]
and choose SELEC. IDIOMA or SELECTION LANGUE. Press [B] and select
ENGLISH. Finally, press [CLEAR/C.RESET].

Clock Setup

Press [MENU] and select “CLOCK SET”.

1

Then press [B] to go to next step.

or

• If the clock is not set, the CLOCK SET screen appears when you press

[MENU]. In this case, go to step 2.

Select the current month.

2

Then press [B] to go to next step.

or

Select the current day.

3

Then press [B] to go to next step.

or

Select the current year.

4

Then press [B] to go to next step.

or

- M E N U -

TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
B CLOCK SET
LANGUAGE SELECT

CLOCK SET

MONTH DAY YEAR
1 0 / – – – – – –

HOUR MINUTE AM/PM
– – : – – – –

CLOCK SET

MONTH DAY YEAR
1 0 / 0 2 – – – –

HOUR MINUTE AM/PM
– – : – – – –

CLOCK SET

MONTH DAY YEAR
1 0 / 0 2 2 0 0 6

HOUR MINUTE AM/PM
– – : – – – –

[B]

.

Press [MENU] to select “CHANNEL SET UP”.

1

Then press [B] to go to next step.

or

• If the clock is not set, the “CLOCK SET” screen appears when you press

[MENU]. In this case, press [MENU] again.

Select “MANUAL SET UP”.

2

Then press [B] to go to next step.

or

Select the channel to be added or deleted.

3

or

Select “ADD” or “DELETE”.

4

or

To exit the menu

5

- M E N U -

TIMER PROGRAMMING
AUTO REPEAT [OFF]
B CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT

CHANNEL SET UP

AUTO SET UP
B MANUAL SET UP

MANUAL SET UP

CHANNEL 30 (CATV)

ADD

MANUAL SET UP

CHANNEL 30 (CATV)

DELETE

Select the current hour.

5

Then press [B] to go to next step.

or

Select the current minute.

6

Then press [B] to go to next step.

or

Select “AM” or “PM”.

7

or

To exit the CLOCK SET screen

8

MONTH DAY YEAR
1 0 / 0 2 MON 2 0 0 6

HOUR MINUTE AM/PM
0 5 : – – – –

MONTH DAY YEAR
1 0 / 0 2 MON 2 0 0 6

HOUR MINUTE AM/PM
0 5 : 4 0 – –

MONTH DAY YEAR
1 0 / 0 2 MON 2 0 0 6

HOUR MINUTE AM/PM
0 5 : 4 0 P M AM
B PM

Hint

• To go back one step, press [s] (during steps 2 to 7).

• Your clock setting will be lost if either there is a power failure or this unit has
been unplugged for more than 30 seconds.

–

–

8

CLOCK SET

CLOCK SET

CLOCK SET

EN

Function Overview

SOURCE

VCR DVD

SOURCE button

DVD OUTPUT
light

VCR OUTPUT light

CHANNEL

SOURCE

VCR

OPEN/CLOSE

DVD

PREV STOP

DISC IN

PLAY

PLAY NEXT

DVD button

VCR button

STANDBY-ON

DISPLAY VCR DVD PAUSE

SLOW

VCR/TV

SKIP/CH.

PLAY

STOP

RECORD

MENU

SETUP TOP MENU

MODE ZOOM

SUBTITLE

T-SET

ANGLE

ENTER

RETURN

SEARCH

MODE

REPEAT A-B

OPEN/CLOSE

/EJECT

SPEED AUDIO

CLEAR/

C. RESET

1 2 3

4 5 6

7 8 9

0

+10

STANDBY-ON

POWER ON

VIDEO

AUDIO

REW F.FWD STOP/EJECT PLAY RECORD CHANNEL

SOURCE

VCR

OPEN/CLOSE

DVD

PREV STOP

DISC IN

PLAY

PLAY NEXT

REC TIMER REC

IR

DIGITAL

AUDIO OUT

COAXIAL

ANT-OUT

ANT-IN

ANT-OUT

ANT-IN

AUDIO

OUT

DVD VCR

DVD/VCR

S-VIDEO

OUT

COMPONENT
VIDEO OUT

AUDIO IN

VIDEO IN

AUDIO OUT

VIDEO OUT

L

LY

R

R

C

B

C

R

DIGITAL

AUDIO OUT

COAXIAL

AUDIO

OUT

DVD

DVD/VCR

VCR

S-VIDEO

OUT

COMPONENT

VIDEO OUT

AUDIO OUT

VIDEO OUT

AUDIO IN

VIDEO IN

L

Y

C

B

C

R

L

R

R

STANDBY-ON

POWER ON

VIDEO

AUDIO

REW F.FWD STOP/EJECT PLAY RECORD CHANNEL

SOURCE

VCR

OPEN/CLOSE

DVD

PREV STOP

DISC IN

PLAY

PLAY NEXT

REC TIMER REC

IR

Front Panel Indicator

Lights up when the disc is inserted.

Lights up during a recording.
Blinks when a recording is paused.

Lights up when power is on.

Lights up when the Timer Recording
or an OTR recording has been set.

VCR / DVD Switching

You must select which component you wish to operate with
[SOURCE] at first, as this product is a combination of a VCR
and a DVD player.

VCR MODE

Press [VCR] on the remote control.

(Verify that the VCR OUTPUT light is lit.)

DVD MODE

Press [DVD] on the remote control.

(Verify that the DVD OUTPUT light is lit.)

Lights up when this unit
is in the DVD mode.

Lights up when this unit is in the VCR mode.

Lights up when the inserted
disc is being played back.
Blinks when an unacceptable
disc is inserted.

Setup

Hint

• Pressing only [SOURCE] on the front panel DOES NOT switch the mode of the

remote control. You MUST select the correct mode on the remote control.

Front & Rear Terminals

32

1

10

9

1: DVD AUDIO OUT (analog) jacks

Connect the supplied audio cable here through the audio in jacks of a television

or other audio equipment. (DVD only)

2: DVD/VCR AUDIO OUT jacks

Connect the supplied audio cable here through the audio in jacks of a television

or other audio equipment.

8 7 6

3: AUDIO IN jack

Connect audio cable coming from the audio out jack of a camcorder, another

VCR or an audio source here.

4: ANT-IN jack

Connect your antenna or cable box here.

5: ANT-OUT jack

Connect the supplied RF cable to the antenna input jack of a television.

[Rear Panel]

4

6

3

[Front Panel]

5

6: VIDEO IN jack

Connect a cable coming from the video out jack of a camcorder, another VCR or

an audio-visual source (laser disc player, video disc player, etc.) here.

7: DVD/VCR VIDEO OUT jack

Connect the supplied video cable here through the video in jack of a television.

8: COMPONENT VIDEO OUT jacks

Connect optional COMPONENT VIDEO cables here through the COMPONENT

VIDEO in jacks of a television. (DVD only)

9: S-VIDEO OUT jack

Connect an optional S-VIDEO cable here through the S-VIDEO in jack of a tel-

evision. (DVD only)

10: DIGITAL AUDIO OUT COAXIAL jack

Connect an optional coaxial digital audio cable here through the coaxial digital

audio in jack of a decoder or audio receiver. (DVD only)

–

–

9

EN

STANDBY-ON

DISPLAY VCR DVD PAUSE

SLOW

VCR/TV

SKIP/CH.

PLAY

STOP

RECORD

MENU

SETUP TOP MENU

MODE ZOOM

SUBTITLE

T-SET

ANGLE

ENTER

RETURN

SEARCH

MODE

REPEAT A-B

OPEN/CLOSE

/EJECT

SPEED AUDIO

CLEAR/
C. RESET

1 2 3

4 5 6

7 8 9

0

+10

Remote Control

1 2 3

4 5 6

7 8 9

0

+10

A-B

ANGLE

AUDIO

CLEAR/

C. RESET

DISPLAY

DVD

ENTER

MENU

MODE

OPEN/CLOSE

/EJECT

PAUSE

PLAY

RECORD

REPEAT

RETURN

SEARCH

MODE

SETUP

SKIP/CH.

SKIP/CH.

SLOW

SPEED

STANDBY-ON

STOP

SUBTITLE

T-SET

TOP MENU

VCR

VCR/TV

ZOOM

Setup

Installing the Batteries for
the Remote Control

Install two AA batteries (supplied)
matching the polarity indicated inside
battery compartment of the remote
control.

1

Keep in mind the following when using
the remote control:

•

Make sure that there is no obstacle
between the remote control and the
remote sensor on the unit.

• The maximum operable ranges from
the unit are as follows.

- Line of sight: approx. 23 feet (7m)

- Either side of center:

- Above:

- Below:

Hint

• Do not mix alkaline and manganese bat­teries.

• Do not mix old and new batteries.

2

approx. 16 feet (5m) within 30°
approx. 16 feet (5m) within 15°
approx.

10 feet (3m) within 30°

Button
(Alphabetical order)

3

Disc/Tape

• To select chapter or title
directly.

•

To search forward/backward
through a disc.

•

To begin slow forward/reverse
playback in the pause mode.

• To repeat between your
chosen point A and B.

• To select camera angles on
a disc.

• To select audio languages
on a disc.

• To clear the markers.

• To clear the numbers
entered incorrectly.

• To cancel the point for A-B
repeat.

• To display the current disc
mode.

•

To select the DVD output mode.

• To activate the remote
control in DVD mode.

• To move the cursor and
determine its position.

•

To call up the Menu on a disc.

• To set black level on/off.

• To set virtual surround
on/off.

• To open or close the disc
tray.

• To pause disc playback.

• To advance playback one
frame at a time.

• To select track directly.

• To search forward/backward
through a disc.

•

To repeat between your cho-

sen point A and B.

• To select STEREO,
L-ch or R-ch.

•

To clear the markers.

• To remove status number in
program input.

• To clear the numbers
entered incorrectly.

• To cancel the point for A-B
repeat.

• To display the current disc
mode.

•

To select the DVD output mode.

• To activate the remote
control in DVD mode.

• To move the cursor and
determine its position.

• To arrange the playing order
or play randomly.

•

To set virtual surround on/off.

• To open or close the disc
tray.

• To pause disc playback.

• To select channel.

• The +10 button has no
effect in VCR mode.

• To forward/backward a tape.

• To exit the VCR Menu.

• To reset the tape counter.

• To display the current time,
tape counter, and channel.

•

To select an item

on the VCR Menu.

•

To advance to the

next VCR Menu.

•

To go back one

step during clock
and timer setting.

• To call up the VCR Menu.

• To eject the video
cassette from the VCR.

• To pause tape playback or
recording.

• To advance playback one
frame at a time.

• To begin disc playback. • To begin disc playback. • To begin tape playback.

DVD mode VCR mode

• To start a recording or One
Touch Recording.

• To play a chapter or title
repeatedly.

• To return to the previous
operation in menu.

• To search chapter, title or
time.

•

To set or search the markers.

• To call up the DVD setup
menu.

• To skip chapters or titles. • To skip tracks.

• To play a track or disc
repeatedly.

• To return to the previous
operation in menu.

• To search track.

• To search time.

•

To set or search the markers.

• To call up the DVD setup
menu.

• To call up the index or time
search menu.

• To change channels.

• To adjust the tracking
manually during playback.

• To view the tape in slow
motion.

• To select the recording
speed.

• To turn the unit on/off. • To turn the unit on/off. • To turn the unit on/off.

• To stop playback. • To stop playback.

• To select subtitles on a disc.

• To call up the Top Menu on
a disc.

• To select DVD position or
TV position.

• To magnify part of a picture.
(x2/x4)

• To select CD position or TV
position.

• To stop playback or
recording.

•

To put the VCR into standby
mode for a Timer Recording.

• To select the VCR output mode.

• To activate the remote
control in VCR mode.

• To select VCR position or
TV position.

–

–

10

EN

STANDBY-ON

DISPLAY VCR DVD PAUSE

SLOW

VCR/TV

SKIP/CH.

PLAY

STOP

OPEN/CLOSE

/EJECT

SPEED AUDIO

1 2 3

4 5 6

7 8 9

0

+10

STANDBY-ON

POWER ON

VIDEO

AUDIO

REW F.FWD STOP/EJECT PLAY RECORD CHANNEL

SOURCE

VCR

OPEN/CLOSE

DVD

PREV STOP

DISC IN

PLAY

PLAY NEXT

REC TIMER REC

IR

PLAY

PLAY

STOP

OPEN/CLOSE

/EJECT

VCR Functions

SEARCH

MODE

Pro.1 Pro.2 Pro.3 Pro.4 Pro.5

02 01 01 02 03

Beginning
of the tape

End of
the tape

CURRENT PROGRAM

INDEX MARK

SEARCH

MODE

VCR

VCR

VCR

Playback

Before:
Turn on the TV and set it to channel 3.

• If channel 3 has been already occupied for broadcasting, see “RF Output Channel” section on page 6.

1 Insert a video cas-

sette into this unit.

3 To stop playback 4

2 To start playback

To eject the cassette

2

Other Operations

To cue or review picture during playback (Picture Search)

Use [g] or [h ]([ F.FWD g] or [REW h]).

• Press it again and the unit will search in super high speed.
(in the SLP mode only)

To freeze the picture on TV screen during playback (Still mode)

Press [PAUSE F]. Each time you press the button, the pic­ture will be forwarded by one frame.

•

If the picture begins to vibrate vertically in the still mode,
stabilize the picture by using

[

CHANNEL K/L]).

• If the picture is distorted or rolling vertically, adjust the verti­cal hold control on your TV if equipped.

Hint

• Still/Slow mode will be automatically cancelled after 5 minutes to prevent damage to the tape and the video head.

• To return to playback from the Picture Search/Still/Slow mode, press [PLAY B].

[SKIP/CH. G/K, H/L] (or

4

3

Counter Reset

Press [CLEAR/C.RESET].

To play back in slow motion (Slow mode)

Press [SLOW] during playback or the still mode.

• If the noise bars appear on the TV screen, you can reduce it

by using [SKIP/CH. G/K, H/L] (or [

Auto Rewind

When a tape reaches its end during playback, fast-forward
or recording (except Timer Recording and One Touch
Recording), the tape will automatically rewind to the beginning.
After rewinding finishes, the unit will eject the tape.

342

1

Hint

• When a tape with­out record tab is
inserted, the unit
will start playback
automatically.

• Tracking will be
automatically
adjusted upon play­back. To adjust the
tracking manually,
press [SKIP/CH.

G/K, H/L] (or
[

CHANNEL K/L]

CHANNEL K/L]

).

).

VCR Functions

Index Search

You can skip the program backward and forward by the Index
Mark.

Press [SEARCH MODE] once.

1

To select Index Mark

2

To rewind

3

To fast forward

After searching, it automatically

4

starts playback.

Hint

• The Index Mark will be made automatically at the beginning of each recording.

• The time gap between Index Marks should be greater then 1 minute for SP
mode, 2 minutes for LP mode and 3 minutes for SLP mode.

• Insert a tape into this unit.

or

INDEX SEARCH
– –

INDEX SEARCH
0 3

ss

BB

PLAYB

01 ~ 20

Time Search

You can search backward and forward a specific length of
time on a tape.

Press [SEARCH MODE] twice.

1

Select the desired length of time for fast forwarding or

2

rewinding.

To rewind

3

To fast forward

After searching, it automatically starts playback.

4

Hint for Index Search & Time Search

• These functions are not available during recording.

• Press [STOP C] to stop the search.

• If a tape ends during a search, your search will be cancelled and the tape will
rewind to the beginning.

–

–

11

• Insert a tape into this unit.

TIME SEARCH
– : – –

TIME SEARCH

or

2 : 5 0

(1 minute~9 hours and 59 minutes)

PLAYB

0:01~ 9:59

ss

BB

EN

Type of tape

T60 T120 T160
SP mode 1hour 2hours 2-2/3hours
SLP mode 3hours 6hours 8hours

Recording/Playback TimeTape Speed

1 2 3

4 5 6

7 8 9

0

REC OTR(0:30) OTR(1:00).....

(Normal recording)

OTR(8:00) OTR(7:30)

PLAY

STOP

OPEN/CLOSE

/EJECT

STANDBY-ON

POWER ON

VIDEO

AUDIO

REW F.FWD STOP/EJECT PLAY RECORD CHANNEL

SOURCE

VCR

OPEN/CLOSE

DVD

PREV STOP

DISC IN

PLAY

PLAY NEXT

REC TIMER REC

IR

STANDBY-ON

DISPLAY VCR DVD PAUSE

SLOW

VCR/TV

SKIP/CH.

PLAY

STOP

RECORD

MENU

SETUP TOP MENU

ENTER

RETURN

OPEN/CLOSE

/EJECT

SPEED AUDIO

1 2 3

4 5 6

7 8 9

0

+10

SKIP/CH.

Auto Repeat

SPEED

RECORD

MENU

MENU

VCR

VCR

VCR

Record tab

This function will playback a tape repeatedly from the beginning when the tape reaches the end.

Press [MENU], and choose

1

“AUTO REPEAT” during playback.

Hint

• To cancel Auto Repeat, follow step 1 above. Then, press [B] so that “OFF” appears beside “AUTO REPEAT”. Press [CLEAR/C.RESET] to exit.

• If menu remains on the TV screen after step 2, press [CLEAR/C.RESET] to exit.

• The Auto Repeat playback will start automatically if you select “AUTO REPEAT” to “ON” in the stop mode.

Recording

Recording & OTR (One Touch Recording)

Before:

Turn on the TV and set it to channel 3.

• If channel 3 has been already occupied for broadcasting,
see “RF Output Channel” section on page 6.

VCR Functions

1

Insert a cassette with

tab into this unit.

3

Press [SPEED] to select the desired tape speed.

2 Select the channel

to record.

- M E N U -

TIMER PROGRAMMING
B AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET

or

LANGUAGE SELECT

3

Press [B] to set

2

“AUTO REPEAT”, “ON” or “OFF”.

6

1

- M E N U -

TIMER PROGRAMMING
B AUTO REPEAT [ON]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT

2

2

or

5
4

Accidental erasure prevention

To prevent accidental recording on a recorded
cassette, remove its record tab. To record on
it later, cover the hole with adhesive tape.

5 6

4

SP

4 Press [RECORD] repeatedly to select the

desired recording length.

REC

5 To stop recording 6 To eject the

Timer Recording

Press [MENU], then select “TIMER PROGRAMMING”.

1

Select an empty program number.

2

Then press [B] to go to next step.

Select “ONCE”, “DAILY” (Mon-Fri), or “WEEKLY”.

3

Then press [B] to go to next step.

or

or

You CAN NOT dub a DVD to a videotape.

To stop recording temporarily (Pause mode)

Press [PAUSE F].

• During the rec-pause mode, five C marks appear on the TV screen. Each C
mark represents one minute.

• Press it again to resume recording.

• Pause mode will be automatically cancelled after 5 minutes to prevent damage
to the tape and the video head.

recorded cassette

•

Insert a tape with its record tab into the unit.

- M E N U -

B TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT

Available program number flashes.

Hint

• If you want to watch one channel while recording another...

1) Press [VCR/TV] to put the unit in TV position.

2) Select a channel you want to watch with the cable box or the satellite box.

TIMER PROGRAMMING

PROG 12345678
DATE
START TIME
END TIME
CHANNEL
REC SPEED

PROGRAM NUMBER 1
DATE – – / – –
START TIME – – : – – – –
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –

PROGRAM NUMBER 1
B ONCE

DAILY
WEEKLY

–

12

Select the desired date.

4

Then press [B] to go to next step.

or

or

• You can set a program one year in advance.

Select the desired start time (hour).

5

Then press [B] to go to next step.

or

or

–

ONE TIME PROGRAM

PROGRAM NUMBER 1
DATE 1 0 / 2 3 MON
START TIME – – : – – – –
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –

ONE TIME PROGRAM

PROGRAM NUMBER 1
DATE 1 0 / 2 3 MON
START TIME 0 7 : 3 0 – –
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –

EN

Select “AM” or “PM”.

SUBTITLE

T-SET

CLEAR/

C. RESET

6

Then press [B] to go to next step.

or

Repeat the procedure in steps 5 and 6 to set the end time.

7

Select the desired channel.

8

Then press [B] to go to next step.

or

• If you have connected the unit to a cable box or satel-

lite box as the connection on page 6, select the VCR to
channel 3 or 4 (the RF output channel of the VCR). Then,

select the desired channel at the cable box or satellite box.
Leave the cable box or satellite box on for Timer Recording.

Select the desired recording speed, then press

9

[CLEAR/C.RESET].

or

• To set another program after step 9, press [B].
Then, continue with step 2.

ONE TIME PROGRAM

PROGRAM NUMBER 1
DATE 1 0 / 2 3 MON
START TIME 0 7 : 3 0 PM
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –
AM
B PM

ONE TIME PROGRAM

PROGRAM NUMBER 1
DATE 1 0 / 2 3 MON
START TIME 0 7 : 3 0 PM
END TIME 0 8 : 3 0 PM
CHANNEL 1 6
REC SPEED – –

ONE TIME PROGRAM

PROGRAM NUMBER 1
DATE 1 0 / 2 3 MON
START TIME 0 7 : 3 0 PM
END TIME 0 8 : 3 0 PM
CHANNEL 1 6
REC SPEED SP
B SP
SLP

Press [SUBTITLE/T-SET] to set timer standby mode.

10

• TIMER REC indicator on the front panel lights up. The unit will change
to the DVD mode.

Hint

• To go back one step, press [s] during steps 3 to 9.

To Check, Correct or Cancel a Timer Program

1) Press [SUBTITLE/T-SET] then, [VCR] on the remote

control.

2) Select main menu by pressing

3) Select “TIMER PROGRAMMING” by using [K/L], then
press [B].

4) Select the program number which you want to check by
using [K/L]. The details of the program you selected will
appear on the TV screen.

• Go to the digit you want to change by using [s/B].

Then, enter correct numbers by using [K/L].

• You may cancel the entire program by pressing [s]

while the program number blinks.

5) Press [CLEAR/C.RESET] to exit.

6) Press [SUBTITLE/T-SET] to return to timer standby
mode.

To cancel a Timer Recording in progress

Press [STOP/EJECT C A] on the unit.

[MENU]

.

Hints for OTR and Timer Recording

• Press [VCR] on the remote control before you set Timer Recording. Make sure the remote control is in the VCR
mode, then press [SUBTITLE/T-SET].

• If a tape is not in the unit or does not have the record tab, TIMER REC indicator on the front panel blinks and Timer
Recording cannot be performed. Please insert a recordable tape.

• When Timer Recordings are set, TIMER REC indicator on the front panel lights up. To use the VCR as usual until the time
for the recording, press [SUBTITLE/T-SET] so that TIMER REC indicator lights off. Press [VCR/TV] to choose the VCR
position. Select either VCR or DVD mode, then continue with the other features as described in this manual.

After an OTR or a Timer Recording has been set, this unit operates as follows:

• If a tape runs out before an OTR or a Timer Recording is finished, the unit ejects the tape, and switches to the DVD mode
automatically. If the DVD power is off, the unit does not switch to the DVD mode but goes into the timer standby mode.
Press [SUBTITLE/T-SET] on the remote control or [STOP/EJECT C A] on the unit, then press [VCR] to activate the VCR
function again.

• Once the unit turns to the timer standby mode, no VCR functions are available until [SUBTITLE/T-SET] is pressed.
([SOURCE] on the front panel and [VCR] on the remote control will not function.)

• To cancel the timer standby mode, press [SUBTITLE/T-SET] on the remote control or [STOP/EJECT C A] on the unit, then
press [VCR] to activate the VCR function again.

• The mode of the unit and the remote control may differ (VCR mode or DVD mode) when you set Timer Recording or after
you cancelled Timer Recording. Press [VCR] or [DVD] on the remote control to select your desired mode before you
operate.

When an OTR or a Timer Recording is completed...

• If Auto Power Off for DVD has been activated and there are Timer Recordings on standby, the unit turns off automatically,
and TIMER REC indicator on the front panel lights to indicate the unit is in the timer standby mode.

• TIMER REC indicator on the front panel flashes if there are no more Timer Recordings on standby.

• If Auto Power Off for DVD has NOT been activated, the unit switches to the DVD mode and all the VCR functions will be
unavailable. All the DVD functions are available during OTR, timer standby mode and Timer Recording.

If you want to use the DVD player during a Timer Recording or while TIMER REC indicator on the front panel is on or blinking.

• Press [STANDBY-ON] to turn on the unit. Press [DVD] on the remote control to choose DVD mode, then continue with the
other DVD features as described in this manual.

NOTE (for Timer Recording) :

• If there is a power failure or the unit is unplugged for more than 30 seconds, clock and all timer settings will be lost.

VCR Functions

–

13

–

EN

DIGITAL

AUDIO OUT

COAXIAL

ANT-OUT

ANT-IN

AUDIO

OUT

DVD DVD/VCR VCR

S-VIDEO

OUT

COMPONENT
VIDEO OUT

AUDIO OUT

VIDEO OUT

AUDIO IN

VIDEO IN

L

Y

C

B

C

R

L

R

ANT-OUT

ANT-IN

VCRDVD/VCR

COMPONENT

VIDEO OUT

AUDIO IN

VIDEO IN

AUDIO OUT

VIDEO OUT

Y

C

B

C

R

L

R

R

AUDIO OUT

VIDEO OUT

Connect

1

Audio/Video cables

(commercially available)

RF cable

(supplied)

(Back of TV)

(Back of DVD/VCR*)

(Back of another source)

or

2

Connect

*Front input jacks are also available

Copying a Video Tape

Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.

1) Insert a pre-recorded tape into another VCR for playing.

2)

Insert a tape with its record tab into this unit for recording.

3) Press [SPEED] on the remote control of the recording

unit to select the desired recording speed (SP/SLP).

4) Select the “L1” or “L2” position on the recording unit.

• To use the input jacks on the back of this unit, select

“L1” position by pressing [0], [0], [1] on the remote
control or [

CHANNEL K/L]

on this unit.

• To use the input jacks on the front of this unit, select

“L2” position by pressing [0], [0], [2] on the remote

VCR Functions

control or [

5) Press [RECORD] on the recording unit.

CHANNEL K/L] on

this

unit

6) Begin playback of the tape in another source.

7) To stop recording, press [STOP/EJECT C A] on the

recording unit, then stop playback of the tape in another
source.

Hint

• For best results during dubbing, use the front panel controls whenever pos­sible. The remote control might affect another source’s operation.

• Always use video-quality shielded cables with RCA-type connectors. Standard
audio cables are not recommended.

• You can use a video disc player, satellite receiver or other audio/video
component with Audio / Video outputs.

.

• “L1” or “L2” is found before the lowest memorized channel. (Example: CH02)

• “L2” input jacks are on the front of this unit.

–

14

–

EN

DVD
DVD

DVD

DVD

Playback

STANDBY-ON

POWER ON

VIDEO

AUDIO

REW F.FWD STOP/EJECT PLAY RECORD CHANNEL

SOURCE

VCR

OPEN/CLOSE

DVD

PREV STOP

DISC IN

PLAY

PLAY NEXT

REC TIMER REC

IR

STANDBY-ON

DISPLAY VCR DVD PAUSE

SLOW

VCR/TV

SKIP/CH.

PLAY

STOP

OPEN/CLOSE

/EJECT

SPEED AUDIO

1 2 3

4 5 6

7 8 9

0

+10

PLAY

PLAY

STOP

STANDBY-ON

OPEN/CLOSE

/EJECT

DVD

Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.

Resume ON

DVD

x2 x4

DVD

E

1

1

x2 x4

Before: Turn on the TV, amplifier and
any other components which are
connected to this unit. Make sure the
TV and audio receiver (commercially
available) are set to the correct channel.

DVD Functions

1

1

2

1 2

Insert a disc with

label facing up.

3
4

Hint

3

To start
playback

4

To stop
playback

DVD menu

Some discs contain menus which allow you to customize
DVD playback. Press [K / L / s / B ] to select an item, then
press [ENTER] (or [PLAY B]).

Calling up a Menu Screen during Playback

• Press [MENU] to call up the DVD menu.

• Press [TOP MENU] to call up the title menu.

• A “prohibited icon” may appear at the top-right on the TV screen when the operation is prohibited
by the disc or this unit.

• Some DVDs may be played from title 2 or 3 due to specific programs.

•

During the playback of a two-layered disc, pictures may stop for a moment. This happens while the 1st
layer is being switched to the 2nd layer. This is not a malfunction.

TIP:

You can change the on-screen language for DVD function in “PLAYER MENU” setting. (Refer to page 20.)

Hint

• Menu operations may vary depending on the disc. Refer to the manual
accompanying the disc for details.

Resume

Press [STOP C] during playback.
Resume message will appear on
the TV screen.
Press [PLAY B], playback will
resume from the point at which
playback was stopped.

Hint

• To cancel resume, press [STOP C] one more time in the stop mode.

• The resume information stays on even when the power is turned off.

Paused and Step-by-Step Playback

Press [PAUSE F] during playback.
To continue playback, press [PLAY B].

The disc goes forward by one frame each time [PAUSE F] is
pressed in the pause mode.
To continue playback, press [PLAY B].

Hint

• On DVDs, set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in the
pause mode are blurred. (Refer to pages 20-21.)

To use [PREV j ], [i NEXT] on this unit

Press once to skip a chapter or track to a desired point.

1

1 4 3

Fast Forward / Reverse Search

Press [h] or [g] repeatedly during playback
to select the required forward or reverse speed.
To continue playback, press [PLAY B].

To use [PREV j ], [i NEXT] on this unit

Press and hold to change forward or reverse playback speed.
To continue playback, press [PLAY B].

Hint

• For DVDs, fast forward or reverse search speed is different depending on the
disc. Approximate speed is 1(x2), 2(x8), 3(x20), 4(x50), 5(x100).

• For Audio CDs, approximate speed is 1(x2), 2(x8), 3(x30).

Slow Forward / Reverse

Press [h] or [g] repeatedly in the pause mode
to select the required forward or reverse speed.
To continue playback, press [PLAY B].

To use [PREV j ], [i NEXT] on this unit

Press and hold in the pause mode to change forward or
reverse playback speed.
To continue playback, press [PLAY B].

DVD Functions

Hint

• Slow forward or reverse speed is different depending on the disc. Approximate
speed is 1(1/16), 2(1/8), 3(1/2).

• Set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in the slow
playback mode are blurred. (Refer to pages 20-21.)

Zoom

1) Press [ZOOM] during playback.

2) Press [ZOOM] repeatedly to select the required zoom

factor: x2, x4 or OFF.

3) Press

[K / L / s / B] to slide the zoomed picture across

the screen.

4) To exit zoom mode, press [ZOOM] to select OFF.

Hint

• Zooming function does not work while the disc menu is showing up.

• x4 zoom is not available on some discs.

• The picture may be distorted when you press
in the zoom mode.

• It may take several seconds to slide the zoomed picture

–

–

15

[PAUSE k] or [h] repeatedly

.

EN

DVD

On-Screen Display

DVD

DISPLAY

DISPLAY

DISPLAY

DISPLAY

DISPLAY

DISPLAY

DISPLAY

4/12 0:03:21 - 0:02:15

T

4/12 0:13:45 - 0:45:40

4/12 0:03:21 - 0:02:15

T

T

11/16 0:00:00 - 0:03:30

11/16 0:00:00 - 0:03:30

1/3 0:00:00 - 1:23:45

11/16 0:00:00 - 0:03:30

1/3 0:00:00 - 1:23:45

T L1

You can check the information about the current disc by pressing [DISPLAY] on the remote control.

1

2

3

DVD Functions

Angle icon appears only in a case
multi-angel is available on the DVD.

Current playback status

Remaining time of the current chapter
Elapsed time of the current chapter

CH(Chapter):
Current chapter number / Total chapters

Remaining time of the current title
Elapsed time of the current title

TT(Title):
Current title number / Total titles

1

2

Current playback status

Remaining time of the current track
Elapsed time of the current track
TR(Track):

Current track number / Total tracks

ALL:
Current track number / Total tracks

Current repeat setting appears only
when the repeat setting is active.

T: Track repeat
A: All Tracks repeat

A B: A-B repeat

Remaining time of the entire disc
Layer numbers, appears only when
playing a two-layered disc.

Elapsed time of the entire disc
L0: Layer 0 is playing

L1: Layer 1 is playing

Current repeat setting appears only

3

when the repeat setting is active.

C: Chapter repeat
T: Title repeat

A B: A-B repeat

Hint

• When you are playing a disc in PROGRAM or RANDOM mode,
PROGRAM (or RANDOM) will be displayed instead of 2.

BIT RATE: The amount of audio and
video data currently being read

4

–

16

–

EN

Search Functions

1:29:00

TOTAL

1 2 3

4 5 6

7 8 9

0

/29

/29

/12

/12

1 2 3

4 5 6

7 8 9

0

+10

1 2 3

4 5 6

7 8 9

0

+10

TR 1 TR 2 TR 3 TR 4

Current Track

(TR)

SKIP

SKIP

PLAY

SKIP/CH.

CH 1 CH 2 CH 3 CH 4

Current Chapter

(CH)

or

SKIP

TT 1 TT2 TT3 TT4

Current Title
(TT)

SKIP

SKIP

SKIP

1:29:00

TOTAL

SEARCH

MODE

SEARCH

MODE

ENTERENTER

ENTERENTER

RETURN

SEARCH

MODE

PLAY

SEARCH

MODE

PLAY

SEARCH

MODE

PLAY

PLAY

SKIP/CH.

DVD

DVD

DVD

DVD

SEARCH MODE does not work during Programmed or Random Playback.

Using Track Search

Using Time Search

Press [SEARCH MODE].

1

Select track number by using the Number buttons within 30 seconds.

2

• For the disc with less than 10 tracks, press the track number directly.

• For discs with more than 10 but less than 99 tracks, to play single-digit track,

press [0] first, then the track number (e.g. for track 3, press [0], [3]). To play a
double-digit track, press the track number.

• For discs with more than 100 tracks, to play a single or a double-digit track,

press [0] first, then the track number (e.g. for track 3, press [0], [0], [3], and for
track 26, press [0], [2], [6]). To play a triple-digit track, press the track number.

Using [SKIP/CH. G/o, H/p]

Press [SKIP/CH. G/o, H/p] during playback.

1

Hint

• [+10] can also bring the Track search display, except for the disc with less than

10 tracks. For such a disc, track search can be done by just pressing the track
number.

Using Title / Chapter Search

Press [SEARCH MODE] once for the Chapter Search.

1

Press [SEARCH MODE] twice for the Title Search.

Select title/chapter number by using the Number buttons

2

within 30 seconds.

Press [SEARCH MODE] repeatedly until the Time Search

1

display appears.

Select a desired disc time by using the Number buttons within 30

2

seconds.

Hint

• When there is no need to enter a number, “0” appears automatically.
For example, “0: 0_: _ _” appears in the Time Search display if the total time of

the title or track is less than 10 minutes.

• Press [CLEAR/C.RESET] to erase the incorrect input at step 2.

Marker Setup

This feature allows you to assign a specific point on a disc to be
called back later.

To set a marker

Press [SEARCH MODE] repeatedly until the marker display

1

appears.

Select a marker.

2

or

Press [ENTER].

3

To return to the marker later

Press [SEARCH MODE] repeatedly until the marker display

1

appears.

DVD Functions

Using [SKIP/CH. G/o, H/p]

Press [SKIP/CH. G/o, H/p] during playback.

1

(If the disc has no chapters)

Hint

• Depending on the disc being played, this function can also be performed by

directly entering the desired chapter number with the Number buttons. Refer
to the manual accompanying the disc.

Select the marker.

2

Press [ENTER] at the desired marker.

3

or

To exit the marker screen

Press [RETURN ].

1

Hint

• The Marker display will disappear in about 30 seconds when there is no output.

• To clear a marker, select the marker to be cleared at step 2 in the section
“To set a marker” or “To return to the marker later” and then press
[CLEAR/C.RESET].

• Opening the disc tray or turning off the power will erase all markers.

• Selecting “AC” at step 2 in the section “To set a marker” or “To return to the
marker later” will also erase all markers.

–

–

17

EN

Repeat / Random / Programmed Playback

A-

A-B

STOP

MODE

PLAY

CD-DA TOTAL 0:45:55

RANDOM PROGRAM

--no indication--

RANDOM

CD-DA TOTAL 0:00:00

CD-DA TOTAL 1:03:30

2/3

1 3:30
5 5:10
10 4:20
11 3:00
12 3:20
17 4:10
22 2:50

A-B

ENTERENTER

PLAY

MODE

PLAY

STOP

PLAY

REPEAT

PLAY

A-B

PLAY

DVD

DVD

DVD

DVD

Repeat Playback

Repeat function is available only during playback.

1

Each time you press [REPEAT] repeat function changes as
example below.

Press [REPEAT] during playbck.

OFF

CHAPTER

TITLE

OFF

TRACK

ALL

(repeat off)

(current chapter repeat)

(current title repeat)

(repeat off)

(current track repeat)

(entire disc repeat)

<Example : DVD>

Hint

• Repeat setting will be cleared when moving to another title, chapter or track.

• Repeat playback are not available with some discs or during repeat A-B playback.

DVD Functions

Repeat A-B Playback

Repeat function is available only during playback.

1

Press [A-B] at your desired starting point (A).

Random Playback

This function shuffles the playing order of tracks instead
of playback in the sequence.

1

2

Press [MODE] twice.

Press [PLAY B] to start Random Playback.

Hint

• To repeat the current track in the random selections, press [REPEAT] repeat-

edly until “ TRACK” appears during playback.

• To repeat the entire random selections, press [REPEAT] repeatedly until

“ ALL” appears during playback.

• During random playback, you cannot go back to the previous track.

Programmed Playback

You may determine the order in which tracks will play.

1

2

Press [MODE] once.

Using [K/L] to select desired track.
Press [ENTER].

or

Press [A-B] at your desired ending point (B).

2

• Point B should be in the same title or track as point A.

Hint

• To exit the sequence, press [A-B] so that “OFF” appears.

• To cancel point A, press [CLEAR/C.RESET] at step 1.

• This function does not work in the other repeat modes.

• Up to 99 tracks can be ordered.

•

If eight or more tracks were in a program, use
to see all the tracks.

Press [PLAY B] to start Programmed Playback.

3

[SKIP/CH. G///K , H //L]

Hint

• Press [CLEAR/C.RESET] at step 2 to erase the most recently entered track.

• To erase all programmed tracks at once, select “ALL CLEAR’’ and press

[ENTER] at step 2.

• While a program is being played back, [STOP C] works as follows;

⇒

Press [STOP C] and [PLAY B] next, so that the programmed playback
restarts. Playback restarts from the current point.

⇒

Press [STOP C] twice and [PLAY B] next, so that playback restarts from
the first track in the original order. However, your programmed playback can
be restarted when you follow the above steps. (Your programs are still stored
until either the disc tray is open or power is turned off.)

• To repeat the current track in the program, press [REPEAT] repeatedly until

“ TRACK’’

• To repeat the entire program, press [REPEAT] repeatedly until “ ALL’’

appears during playback.

–

–

18

appears during playback.

EN

Special Settings

1.ENG Dolby D 3/2.1ch 48k/3

STEREO

1 / 8

ON

OFF

OFF

1

1.ENG/6

OFF

ANGLE

PLAY

PLAY

MODE

ENTERENTER

ENTERENTER

RETURN

1.ENG/6

SUBTITLE

T-SET

PLAY

SUBTITLE

T-SET

PLAY

AUDIO

PLAY

AUDIO

PLAY

MODE

PLAY

DVD

DVD

DVD

DVD

DVD

DVD

RETURN

Subtitle Language

This unit allows you to select a subtitle language (if available)
during DVD playback.

1

Press [SUBTITLE/T-SET] during playback.

Each time you press [SUBTITLE/T-SET], subtitle language
changes as example below.

OFF

...

ENG

FRE

(no subtitles)

(English subtitles)

(French subtitles)

To set subtitle ON/OFF

Press [SUBTITLE/T-SET] during playback.

1

Press [B] to select subtitle ON or OFF.

2

Hint

• If your language is not shown after pressing [SUBTITLE/T-SET] several times,

the disc may not have that language. However, some discs allow subtitle lan­guage setting on the disc menu. (Operation varies depending on the discs, so
refer to the manual along with the disc.)

• When “NOT AVAILABLE” appears on the TV screen, it means no subtitle is
recorded on the scene.

• If you choose a language that has a three- letter-language code, the code will
be displayed every time you change the subtitle language setting. If you choose
any other languages, ‘---’ will be displayed instead. (Refer to page 24.)

• Some discs will only allow you to change the subtitle from the disc menu. Refer
to the manual accompanying the discs for details.

Audio Language

This unit allows you to select an audio language (if multiple
languages are available) during DVD playback.

1

Press [AUDIO] to change audio language.

Camera Angle

Some DVD discs may contain scenes which have
been shot simultaneously from various angles.
You can change the camera angle if the angle
icon appears on the screen. If the “ANGLE ICON”
setting is “OFF” in the OTHERS menu, the angle icon will not
appear. (Refer to pages 20-22.)

1

Press [ANGLE] during playback.

Black Level Setting

Press [MODE] during playback.

1

Press [ENTER] to

2

adjust the black level.

ON: Makes the dark areas brighter.
OFF: Shows the original picture as recorded.

Press [RETURN ] to exit.

3

Adjust the Black Level Setting to make
the dark areas of the TV picture brighter.

Stereo Sound Mode

Press [AUDIO] during CD playback.

1

Each time you press [AUDIO], sound mode changes as example below.

This unit allows you to select a sound
mode during CD playback.

STEREO

L-ch

R-ch

(right and left channels are active)

(left channel is active)

(right channel is active)

Virtual Surround

DVD Functions

Each time you press [AUDIO], audio language changes as
example below.

ENG

SPA

FRE

(English audio)

(Spanish audio)

(French audio)

...

Hint

• Some discs will only allow you to change the audio setting from the disc menu.
Refer to the manual accompanying the discs for details.

• When “OFF” appears on the TV screen, it means audio language is not
available.

• If your language is not shown after pressing [AUDIO] several times, the disc
may not have that language. However, some discs allow audio language set­ting on the disc menu. (Operation varies depending on the disc, so refer to the
manual along with the disc.)

You can enjoy stereophonic virtual world on your existing 2
channel stereo system.

Press [MODE] twice (once for CD) during playback.

1

Press [ENTER] for the desired effect.

2

1: Natural effect
2: Emphasized effect
OFF: No effects (original sound)

Press [RETURN ] to exit.

3

Hint

For CD play back only

• Virtual Surround will not be effective if the sound mode is set to something
other than STEREO. Refer to “Stereo Sound Mode”.

–

–

19

EN

DVD Setup

DVD

ENTERENTER

ENTERENTER

SETUP

SETUP

QUICK
CUSTOM
INITIALIZE

SETUP

PLAY

STOP

SETUP QUICK

PLAYER MENU
TV ASPECT
DOLBY DIGITAL

ENGLISH
4:3 LETTER BOX
BITSTREAM

ENTERENTER

AUDIO
ORIGINAL
ENGLISH
FRENCH

SUBTITLE
OFF
ENGLISH
FRENCH

DISC MENU
ENGLISH
FRENCH
SPANISH

PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL

SETUP LANGUAGE

AUDIO
SUBTITLE
DISC MENU
PLAYER MENU

ORIGINAL
OFF
ENGLISH
ENGLISH

ENTERENTER

SETUP CUSTOM

LANGUAGE
DISPLAY
AUDIO
PARENTAL
OTHERS

ENTERENTER

SETUP

PLAY

STOP

SETUP OTHERS

ANGLE ICON
AUTO POWER OFFONON

SETUP AUDIO

DRC
DOWN SAMPLING
DOLBY DIGITAL

ON
ON
BITSTREAM

SETUP DISPLAY

TV ASPECT
STILL MODE

4:3 LETTER BOX
AUTO

SETUP LANGUAGE

AUDIO
SUBTITLE
DISC MENU
PLAYER MENU

ORIGINAL
OFF
ENGLISH
ENGLISH

SETUP PARENTAL

PASSWORD

Please enter a 4-digit password.

SETUP

QUICK
CUSTOM
INITIALIZE

SETUP

QUICK
CUSTOM
INITIALIZE

ENTERENTER

QUICK SETUP Menu

You can select the “PLAYER MENU”, “TV ASPECT” or “DOLBY DIGITAL” from the QUICK SETUP menu quickly.

2 Select the desired item.1 Press [SETUP] in the stop mode.

or

Confirm that “QUICK” is selected.

You can change the settings of the unit.

QUICK

•

1 Press [SETUP] in the stop mode.

DVD Functions

LANGUAGE menu

<SETUP MENU>

P20 A Step 5
P21 B Step 5
P21 C Step 5

•

Refer to the sections “PLAYER MENU”, “TV ASPECT”
or “DOLBY DIGITAL” section on page 20 or 21.

CUSTOM Menu

on pages 20-21 indicates DVD Setup menus also accessible from the QUICK SETUP menu.

<SETUP MENU>

2 Select “CUSTOM”.

or

AUDIO menuDISPLAY menu

PARENTAL menu

3 Select the desired item.

or

OTHERS menu

page 20

LANGUAGE Setting

A

A

page 21

B

page 21

C

page 22

Follow steps 1 to 3 in the “CUSTOM Menu” section on above.

4 Select the desired item. 6 To exit the menu

or

LANGUAGE menu

5 Select the desired language.

or

AUDIO: *1 *2
(Default: ORIGINAL)

Sets the audio language.

SUBTITLE: *1 *2
(Default: OFF)

Sets the subtitle language.

DISC MENU: *1
(Default: ENGLISH)

Sets the language for DVD

menu.

PLAYER MENU:
(Default: ENGLISH)

Sets the language for the

On-screen display.

QUICK

–

20

–

Hint

*1

• Language options are not available with

• If OTHER is selected on the AUDIO,

• Only the languages supported by the disc

*2

• Language Setting for Audio and Subtitle are

D

page 22

E

some discs.

SUBTITLE or DISC MENU screen, press
four-digit number to enter the code for the
desired language. (Refer to the language
code list on page 24.)

can be selected.

not available with some discs. Then use
[AUDIO] and [SUBTITLE/T-SET]. Details
are on page 19.

EN

DISPLAY Setting

SETUP AUDIO

DRC
DOWN SAMPLING
DOLBY DIGITAL

ON
ON
BITSTREAM

TV ASPECT

4:3

LETTER BOX

4:3

PAN & SCAN

16:9

WIDE

TV ASPECT

4:3 LETTER BOX

STILL MODE

AUTO

TV ASPECT

4:3 LETTER BOX

STILL MODE

AUTO

STILL MODE

AUTO
FIELD
FRAME

DRC ON
DOWN SAMPLING

ON

DOLBY DIGITAL BITSTREAM

OFF
ON
BITSTREAM

ENTERENTER

DRC ON
DOWN SAMPLING

ON

DOLBY DIGITAL BITSTREAM

OFF
ON
BITSTREAM

DRC ON
DOWN SAMPLING

ON

DOLBY DIGITAL BITSTREAM

ON
OFF
BITSTREAM

DRC ON
DOWN SAMPLING

ON

DOLBY DIGITAL BITSTREAM

ON
ON

PCM

DRC ON
DOWN SAMPLING

ON

DOLBY DIGITAL BITSTREAM

OFF
ON
BITSTREAM

DRC ON
DOWN SAMPLING

ON

DOLBY DIGITAL BITSTREAM

ON
OFF
BITSTREAM

SETUP DISPLAY

TV ASPECT
STILL MODE

4:3 LETTER BOX
AUTO

ENTERENTER

ENTERENTER

ENTERENTER

SETUP

ENTERENTER

ENTERENTER

ENTERENTER

SETUP

B

You can change the display functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 20.

4 Select the desired item.

or

5

TV ASPECT:
(Default: 4:3 LETTER BOX)

See Hint on the right.

QUICK

Select the
desired
setting.

or

DISPLAY menu

STILL MODE:
(Default: AUTO)

See Hint on the right.

Select the
desired
setting.

or

6 To exit the menu

Hint

TV ASPECT:

• Select “4:3 LETTER BOX”, so
that black bars may appear on
the top and bottom of the screen.

• Select “4:3 PAN & SCAN” for a
full height picture with both sides
adjusted.

• Select “16:9 WIDE” if a wide­screen TV is connected to this
unit.

STILL MODE:

• Select “AUTO” usually.

• If you select “AUTO”, automati
cally select the best resolution
setting (FRAME or FIELD) based
on the data characteristics of the
pictures. (default)

• If you select “FIELD”, the picture
in the still mode will be stabi­lized.

• If you select “FRAME”, the
picture in the still mode will be
highly defined.

• An individual picture on TV
screen is called a “frame”, which
consists of two separate images
called as “field”.

•

Some pictures may be blurred
if you select “AUTO” in the still
mode due to their date charac­teristics.

-

AUDIO Setting

C

Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow steps 1 to 3
in the “CUSTOM Menu” section on page 20.

4 Select the desired item.

or

5

DRC (Dynamic Range Control):
(Default: ON)

Set to “ON” to compress the range between soft and loud sounds.

6 To exit the menu

Hint

AUDIO menu

DOWN SAMPLING:
(Default: ON)

Set to “ON” when outputting in 48kHz.
Set to “OFF” when outputting the original sound.

DOLBY DIGITAL:

QUICK

(Default: BITSTREAM)

Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.

• BITSTREAM: outputs a Dolby Digital Signals.

• PCM: converts the Dolby Digital into PCM (2 channel).

DRC:

• This function is available only on
the discs which are recorded in
the Dolby Digital format.

DOWN SAMPLING:

• When playing back a 96kHz disc
with the copyright protection,
or when Virtual Surround is set
to “1” or “2”, the sound will be
down sampled at 48kHz and
output as digital audio even if
the “DOWN SAMPLING” is set
to “OFF”.

• This function is available only
on digital outputting of a disc
recorded in 96kHz.

DVD Functions

–

21

–

EN

SETUP PARENTAL

PASSWORD

Enter current password.

SETUP PARENTAL

PASSWORD

Please enter a 4-digit password.

PARENTAL Setting

ENTERENTER

ENTERENTER

PASSWORD CHANGE

PARENTAL LEVEL ALL

SETUP

PARENTAL LEVEL
ALL
8
7 [NC-17]
6 [R]

PASSWORD CHANGE

PARENTAL LEVEL ALL

SETUP PARENTAL

PASSWORD

Enter current password.

SETUP PARENTAL

PASSWORD

Please enter a 4-digit password.

TV ASPECT

4:3

LETTER BOX

4:3

PAN & SCAN

16:9

WIDE

ANGLE ICON ON
AUTO POWER OFF

ON

TV ASPECT

4:3 LETTER BOX

STILL MODE

AUTO

ANGLE ICON ON
AUTO POWER OFF

ON

ON
OFF

OFF
ON

TV ASPECT

4:3 LETTER BOX

STILL MODE

AUTO

STILL MODE

AUTO
FIELD
FRAME

TV ASPECT

4:3

LETTER BOX

4:3

PAN & SCAN

16:9

WIDE

ANGLE ICON ON
AUTO POWER OFF

ON

TV ASPECT

4:3 LETTER BOX

STILL MODE

AUTO

OFF
ON

TV ASPECT

4:3 LETTER BOX

STILL MODE

AUTO

STILL MODE

AUTO
FIELD
FRAME

SETUP OTHERS

ANGLE ICON
AUTO POWER OFF

ON
ON

ENTERENTER

1 2 3

4 5 6

7 8 9

0

ENTERENTER

ENTERENTER

SETUP

SETUP

ENTERENTER

ENTERENTER

1 2 3

4 5 6

7 8 9

0

1 2 3

4 5 6

7 8 9

0

D

Parental Control limits the disc viewing that exceed your settings. (An incorrect password will not be acceptable.)
This feature prevents your children from viewing inappropriate materials.

Parental Levels

Parental Level allows you to set the rating levels of your DVD discs. Playback will stop if the ratings exceed the levels you set.
Follow steps 1 to 3 in the “CUSTOM Menu” section on page 20.

4 Enter your desired four-digit

password.

5

Select “PARENTAL
LEVEL”.

or or

6 Select the desired

level.

7 To exit the menu

PARENTAL menu

or

If you have set a password
already, enter the current
four-digit password.

CONTROL LEVELS

• ALL: All parental locks are cancelled.

• Level 8: DVD softwares of any grades (adult/general/children) can be played back.

• Levels 7 to 2: Only DVD softwares intended for general use and children can be played back.

• Level 1: Only DVD softwares intended for children can be played back, with those intend

TIPS FOR LEVELS

• 7 [NC-17]: No one under 17 admitted

• 6 [R]: Restricted; under 17 requires accompanying parent or adult guardian

• 4 [PG13]: Unsuitable for children under 13

• 3 [PG]: Parental Guidance suggested

• 1 [G]: General Audience

ed for adult and general use prohibited.

Hint

• DVD-Video discs may not respond to the parental lock settings. Make sure this function works with
your DVD-Video discs.

To Change the Password for Parental Controls

You can change your password for parental controls. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 20.

DVD Functions

4 Enter current four-digit

password.

PARENTAL menu

5

Select “PASSWORD
CHANGE”.

or

6 Enter your new

four-digit password
(except for 4737).

7 To exit the menu

Hint

• Record the password
in case you forget it.

• If you forget the
password, press [4],
[7], [3], [7] at step 4,
then enter your new
password.Password
will be cleared and
parental levels will be
set to “ALL”.

-

OTHERS Setting

E

You can change the other functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 20.

4 Select the desired item.

OTHERS menu

or

5

ANGLE ICON:
(Default: ON)

Set to “ON” to show the angle icon when multiple camera angles are

available during DVD playback.

AUTO POWER OFF:
(Default: ON)

Set to “ON” to turn this unit off automatically after 30 minutes of no use.

–

–

22

6 To exit the menu

EN

Reset to the Default Setting (Except for PARENTAL Setting)

SETUP

QUICK
CUSTOM
INITIALIZE

SETUP INITIALIZE

Initialize?
NO
YES

SETUP

SETUP

QUICK
CUSTOM
INITIALIZE

SETUP

PLAY

STOP

ENTERENTER

ENTERENTER

stop mode.

2 Select “INITIALIZE”.

or or

3 Select “YES”.1 Press [SETUP] in the

4

To exit the
menu

<SETUP MENU>

Press
twice.

Hint

• When you cancel
to initialize at step
3, select “NO”.

Information

Troubleshooting Guide

If this unit does not perform properly when operated as instructed in this Owner's Manual, check this unit consulting the following checklist.

PROBLEM CORRECTIVE ACTION

No power.

DVD / VCR

This unit does not
respond to the remote
control.

Poor picture or noise.

Timer recording is impos­sible.

Cannot go into record
mode.

Playback picture is partially
noisy.

Cannot view a tape but

VCR

the audio is OK.

No or poor, playback
picture.

TV programs cannot be
seen normally.

Video or color fades in
and out when making a
copy of a video tape.

Cannot remove the tape.

No picture.

Disc cannot be played.

No sound.

DVD

Distorted picture.

Audio or subtitle language
does not match the setup.

The camera angle cannot
be changed.

Audio or subtitle language
cannot be changed.

“Prohibited icon” appears
on the screen, prohibiting
an operation.

• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual for details on correct operations.

• Playback from a desired track and random playback are not available during program playback.

• Some functions are prohibited on some discs.

• Make sure the power plug is connected to an AC outlet.

• Make sure the power is turned on.

• Check if the power plug is connected to an AC outlet.

• Check the batteries in the remote control.

• Aim the remote control directly at the remote sensor. If necessary, remove all the obstacles between the sensor and the remote control.

• You have to be within 23 feet (7m) of this unit.

• Check if the right mode is selected. If it’s not in the right mode, press [DVD] or [VCR], whichever you need, on the remote control.

• Check if a cassette tape is in this unit.

• Tune your radio to an empty AM station so that you hear a lot of noises. Turn the volume up, then if you hear some signal sound from the radio
in response to your pressing buttons on the remote control, the remote control is working.

• Interference signal may be received. Change the position and orientation of the unit.

• Make sure the Timer Recording is set correctly.

• Make sure TIMER REC indicator on the front panel lights up. If not, press [SUBTITLE/T-SET].

• Make sure the VCR clock is set correctly.

• Make sure the tape has a record tab. If needed, cover the hole with adhesive tape.

• Activate this unit in VCR mode. Press [VCR] on the remote control so that the VCR OUTPUT light is lit.

• Adjust tracking control for a better picture by pressing [CHANNEL L/K]] on the unit or [SKIP/CH. G/K, H/L] on the remote control.

• Head cleaning may be necessary. Refer to “AUTO HEAD CLEANING”.

• Make sure the VCR is not in the Menu mode.

• Change the RF output channel to CH4. Then select the same channel on the TV.

• Fine tune your TV.

• Re-check the ANT-IN and ANT-OUT connections. See the front page and page 6.

• Press [VCR].

• Press [VCR] on the remote control to activate it in the VCR mode. Check if the VCR OUTPUT light is lit, then set it to the TV position by press­ing [VCR].

• You cannot copy a copyrighted video tape. You are experiencing copy guard protection.

• Check if this unit is in the VCR mode. If not, press [VCR] on the remote control to switch the mode.

• Connect the video cable fi rmly.

• Insert a correct video disc that plays on this unit.

• Press [DVD] on the remote control. Check if the DVD OUTPUT light is lit. Then try other DVD features.

• Insert the disc.

• Clean the disc.

• Place the disc correctly with the label side up.

• Cancel the parental lock or change the control levels.

• Handle a disc with special care so that it does not have fi ngerprints, scratches, or dusts on its surface.

• Connect the audio cables fi rmly.

• Turn the power of the audio component on.

• Correct the audio output settings.

• Correct the input settings on the audio component.

• Connect this unit directly to the TV.

• There are some cases where pictures may be slightly distorted, and those are not a sign of a malfunction.

• Although pictures may stop for a moment, this is not a malfunction.

• The selected language is not available for audio or subtitles on the DVD.

-This is not a malfunction.

• The DVD does not contain sequences recorded from different camera angles.

-This is not a malfunction.

• The DVD does not contain audio source or subtitles in the selected language.

-This is not a malfunction.

• That operation is prohibited by this unit or the disc.

-This is not a malfunction.

Information

–

23

–

EN

Specifications

Video Heads :

Four Heads

Output signal format :

NTSC color

Power source :

120 V AC +/- 10%, 60 Hz +/- 0.5%

Power consumption :

21 W (standby: 3.8W)

Operating temperature :

41°F (5°C) to 104°F (40°C)

Dimensions :

W : 17 3/16” (435mm)
H : 3 3/4” (94mm)
D : 9 3/16” (233mm)

Weight :

Approx 6.0lbs (2.7kg)

• Designs and specifications are subject
to change without notice.

• If there is a discrepancy between lan­guages, the default language will be
English.

Language Code List

Language Code Language Code Language Code Language Code

Abkhazian 4748
Afar 4747
Afrikaans 4752
Albanian 6563
Amharic 4759
Arabic 4764
Armenian 5471
Assamese 4765
Aymara 4771
Azerbaijani 4772
Bashkir 4847
Basque 5167
Bengali;Bangla 4860
Bhutani 5072
Bihari 4854
Bislama 4855
Breton 4864
Bulgarian 4853
Burmese 5971
Byelorussian 4851

Cambodian 5759
Catalan 4947
Chinese [CHI] 7254
Corsican 4961
Croatian 5464
Czech 4965
Danish [DAN] 5047
Dutch [DUT] 6058
English [ENG] 5160
Esperanto 5161
Estonian 5166

Faroese 5261
Fiji 5256
Finnish [FIN] 5255

If you choose a Language that has a 3 letter language code, the code will be displayed every time you change the Audio or Subtitle language setting on page 19. If you

choose any other languages, ‘---’ will be displayed instead. (3 letter language code is written in bracket.)

A-B

C-E

F-H

French [FRE] 5264
Frisian 5271
Galician 5358
Georgian 5747
German [GER] 5051
Greek [GRE] 5158
Greenlandic 5758
Guarani 5360
Gujarati 5367
Hausa 5447
Hebrew 5569
Hindi 5455
Hungarian [HUN] 5467

Icelandic [ICE] 5565
Indonesian 5560
Interlingua 5547
Interlingue 5551
Inupiak 5557
Irish [IRI] 5347
Italian [ITA] 5566
Japanese [JPN] 5647
Javanese 5669
Kannada 5760
Kashmiri 5765
Kazakh 5757
Kinyarwanda 6469
Kirghiz 5771
Kirundi 6460
Korean [KOR] 5761
Kurdish 5767

Laothian 5861
Latin 5847
Latvian;Lettish 5868
Lingala 5860
Lithuanian 5866

I-K

L-N

Macedonian 5957
Malagasy 5953
Malay 5965
Malayalam 5958
Maltese 5966
Maori 5955
Marathi 5964
Moldavian 5961
Mongolian 5960
Nauru 6047
Nepali 6051
Norwegian [NOR] 6061

Occitan 6149
Oriya 6164
Oromo(Afan) 6159
Panjabi 6247
Pashto;Pushto 6265
Persian 5247
Polish 6258
Portuguese [POR] 6266
Quechua 6367
Rhaeto-Romance 6459
Romanian [RUM] 6461
Russian [RUS] 6467

Samoan 6559
Sangho 6553
Sanskrit 6547
Scots Gaelic 5350
Serbian 6564
Serbo-Croatian 6554
Sesotho 6566
Setswana 6660
Shona 6560
Sindhi 6550
Singhalese 6555

O-R

S

Siswat 6565
Slovak 6557
Slovenian 6558
Somali 6561
Spanish [SPA] 5165
Sundanese 6567
Swahili 6569
Swedish [SWE] 6568

Tagalog 6658
Tajik 6653
Tamil 6647
Tatar 6666
Telugu 6651
Thai 6654
Tibetan 4861
Tigrinya 6655
Tonga 6661
Tsonga 6665
Turkish [TUR] 6664
Turkmen 6657
Twi 6669

Ukrainian 6757
Urdu 6764
Uzbek 6772
Vietnamese 6855
Volapuk 6861
Welsh 4971
Wolof 6961
Xhosa 7054
Yiddish 5655
Yoruba 7161
Zulu 7267

T

U-Z

Information

FUNAI CORP. will repair this product, free of charge in the USA in the event
of defect in materials or workmanship as follows:

DURATION:
PARTS:

LABOR: FUNAI CORP. will provide the labor without charge for a period of

LIMITS AND EXCLUSIONS:

This warranty is extended only to the original retail purchaser. A purchase
receipt or other proof of original retail purchase will be required together with
the product to obtain service under this warranty.

This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are

altered, replaced, defaced, missing or if service was attempted by an unau­thorized service center. This limited warranty does not apply to any product
not purchased and used in the United States.

This product is produced for home use and this warranty only covers failures
due to defects in material or workmanship which occurs during normal use. It
does not cover damage which occurs in shipment, or failures which are caused
by repairs, alterations or product not supplied by FUNAI CORP., or damage
which results from accident, misuse, abuse, mishandling, misapplication, altera­tion, faulty installation, improper maintenance, commercial use such as hotel,
rental or office use of this product or damage which results from fire, flood,
lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY
ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS,
COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

LIMITED WARRANTY

FUNAI CORP. will provide parts to replace defective parts without
charge for one (1) year from the date of original retail purchase.
Certain parts are excluded from this warranty.

ninety (90) days from the date of original retail purchase.

–

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO
EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL
DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE
INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU
OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL
OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES
INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FITNESS
FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY
FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES. ALL
WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY
AN AUTHORIZED SERVICE CENTER. THIS WARRANTY IS VALID WHEN
THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU
MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. IF,
AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO
OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE
CONTACT FUNAI CORP.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF
THIS PRODUCT WITHOUT PRIOR NOTICE.

To locate your nearest AUTHORIZED SERVICE CENTER or for general
service inquiries, please contact us at:

FUNAI CORPORATION

Customer Service

Tel :[phone]

http://www.funai-corp.com

19900 Van Ness Avenue, Torrance, CA 90501

–

24

EN

STANDBY-ON

Español

SOURCE

VCR DVD

Botón SOURCE

Luz
DVD OUTPUT

Luz
VCR OUTPUT

CHANNEL

SOURCE

VCR

OPEN/CLOSE

DVD

PREV STOP

DISC IN

PLAY

PLAY NEXT

Botón DVD

Botón VCR

STANDBY-ON

DISPLAY VCR DVD PAUSE

SLOW

VCR/TV

SKIP/CH.

PLAY

STOP

RECORD

MENU

SETUP TOP MENU

MODE ZOOM

SUBTITLE

T-SET

ANGLE

ENTER

RETURN

SEARCH
MODE

REPEAT A-B

OPEN/CLOSE

/EJECT

SPEED AUDIO

CLEAR/

C. RESET

1 2 3

4 5 6

7 8 9

0

+10

VCR

VCR

MENU

Conexiones

1

Consulte la “Basic TV Connection” en la página delantera
antes de utilizar esta unidad.

Canal de salida RF

Si el canal 3 se está utilizando para una transmisión,

1) Programe su televisor al canal 4.

2) Inserte una cinta pregrabada en esta unidad.

3) Pulse

[SOURCE] en la unidad para que se encienda la

luz VCR OUTPUT.

• Si aparece ruido en la pantalla de TV, presione

[VCR/TV]

en el mando a distancia.

4) Pulse una vez [PLAY B].

5) Después de unos segundos, pulse [PLAY B] en la uni-

dad durante 3 segundos.

• El canal de salida RF cambiará del canal 3 al canal 4 y
podrá ver una imagen reproducida.

• Cuando no aparezca una imagen en la pantalla del televi­sor, repita el paso 4.

6) Pulse [STOP C] para parar la reproducción.

Instalación de las pilas del control remo-

2

to

1

Conmutación VCR/DVD

3

2

3

Pulse [B] para AJUSTE AUTO.

3

Conecta el cable de la caja de canales de cable o la caja de satélite en la

toma ANT-IN de la unidad?

SI

Si Pulse

[MENU]

para salir.

CA 01

AJUSTE AUTO

NO

No Espere unos minutos.

Después del escaneo

• El sintonizador se detiene en el canal memorizado más bajo.

• Puede seleccionar sólo los canales memorizados en esta unidad con

[SKIP/CH. G//K, H//L] (o [CHANNEL K // L]).

• Si aparece nuevamente “AJUSTE AUTO” en la pantalla de TV, verifique las

conexiones de cable. Presione nuevamente [B].

Ajuste del reloj

5

1

• Si no se ha ajustado el reloj, aparece la
pantalla AJUSTE DE RELOJ cuando pulse
[MENU]. En este caso, vaya al paso 2.

Seleccione el mes actual.

2

o

o

- M E N U -

PROGRAMAR
AUTOREPETIR [OFF]
AJUSTE CANAL
B AJUSTE DE RELOJ
SELEC. IDIOMA

MES DIA AÑO
1 0 / – – – – – –

HORA MINUTO AM/PM
– – : – – – –

AJUSTE DE RELOJ

✄

Pulse [VCR] en el control remoto. (Compruebe que está encen­dida la luz VCR OUTPUT.)

Pulse [DVD] en el control remoto. (Compruebe que está encen­dida la luz DVD OUTPUT.)

Consejo

• Si pulsa sólo [SOURCE] en el panel frontal NO cambía el modo del control

remoto. DEBE seleccionar también el modo correcto en el control remoto.

Activación de la unidad por primera vez

4

1 Encienda el televisor y sintonice al canal 3.

• Si el canal 3 se está utilizando para una transmisión, vea la
sección “RF Output Channel”.

2

MODO VCR

MODO DVD

o

LANGUAGE SELECT

B ENGLISH [ON]
FRANCAIS
ESPAÑOL

–

25

Seleccione el dia actual.

3

o

Seleccione el año actual.

4

o

Seleccione la hora actual.

5

o

Seleccione los minutos actuales.

6

o

Seleccione “AM” o “PM”.

7

o

Para salir de la pantalla AJUSTE DE RELOJ

8

–

AJUSTE DE RELOJ

MES DIA AÑO
1 0 / 0 2 – – – –

HORA MINUTO AM/PM
– – : – – – –

AJUSTE DE RELOJ

MES DIA AÑO
1 0 / 0 2 2 0 0 6

HORA MINUTO AM/PM
– – : – – – –

AJUSTE DE RELOJ

MES DIA AÑO
1 0 / 0 2 LUN 2 0 0 6

HORA MINUTO AM/PM
0 5 : – – – –

AJUSTE DE RELOJ

MES DIA AÑO
1 0 / 0 2 LUN 2 0 0 6

HORA MINUTO AM/PM
0 5 : 4 0 – –

AJUSTE DE RELOJ

MES DIA AÑO
1 0 / 0 2 LUN 2 0 0 6

HORA MINUTO AM/PM
0 5 : 4 0 P M AM
BPM

Español

ES

PLAY

PLAY

STOP

OPEN/CLOSE

/EJECT

Español

STANDBY-ON

DISPLAY VCR DVD PAUSE

SLOW

VCR/TV

SKIP/CH.

PLAY

STOP

RECORD

MENU

SETUP TOP MENU

MODE ZOOM

SUBTITLE

T-SET

ANGLE

ENTER

RETURN

SEARCH

MODE

REPEAT A-B

OPEN/CLOSE

/EJECT

SPEED AUDIO

CLEAR/

C. RESET

1 2 3

4 5 6

7 8 9

0

+10

PLAY

PLAY

STOP

STANDBY-ON

OPEN/CLOSE

/EJECT

VCR

DVD

1 2 3

4 5 6

7 8 9

0

+10

A-B

ANGLE

AUDIO

CLEAR/

C. RESET

DISPLAY

DVD

ENTER

MENU

MODE

OPEN/CLOSE

/EJECT

PAUSE

PLAY

RECORD

REPEAT

RETURN

SEARCH

MODE

SETUP

SKIP/CH.

SKIP/CH.

SLOW

SPEED

STANDBY-ON

STOP

SUBTITLE

T-SET

TOP MENU

VCR

VCR/TV

ZOOM

6

Antes: Encienda el televisor
y cambie al canal 3.

• Si el canal 3 se está utilizando para

1

3

7

Antes: Encienda el televisor, amplificador y
otros equipos que puedan estar conectados a
esta unidad. Asegúrese que el televisor y el
sintoamplificador de audio (de venta en los
comercios) están en el canal correcto.

1

3

8

Español

Reproducción de la
grabadora de vídeo

una transmisión, vea la sección
“RF Output Channel”.

Para parar la
reproducción

Para empezar la

2

reproducción

Para expulsar

4

Reproducción de DVD/
CD

2

Ponga un disco con la
etiqueta hacia arriba.

Para empezar
la reproducción

Para parar la

4

reproducción

Control remoto

Disco/cinta

Botón
(Orden alfavético)

Modo DVD

• Para seleccionar directamente
el capítulo o el título.

• Para buscar en avance/
retroceso en un disco.

• Para empezar la reproducción
en avance/retroceso lento
durante el modo de pausa.

• Para repetir entre los puntos A
y B elegidos.

•

Para seleccionar los ángulos　
de la cámara en un disco.

• Para seleccionar el idioma de
audio en un disco.

• Para borrar los marcadores.

• Para borrar los números
entrados incorrectamente.

• Para borrar el punto para la
repetición A-B.

• Para indicar el modo de disco
actual.

• Para seleccionar el modo de
salida de DVD.

• Para activar el mando a dis­tancia en el modo DVD.

• Para mover el cursor y deter­minar su posición.

• Para llamar el menu en un
disco.

• Para activar/desactivar el nivel
del negro.

• Para activar/desactivar el
envolvente virtual.

• Para abrir o cerrar la bandeja
del disco.

• Para hacer una pausa de
reproducción del disco.

• Para avanzar la reproducción
un cuadro a la vez.

• Para empezar la reproducción
del disco.

•

Para reproducir repetidamente
un capítulo o título.

• Para volver a la operación
previa en el menú.

• Para buscar un capítulo, título
u hora.

• Para colocar o buscar los mar­cadores.

• Para llamar el menú de
programación de DVD.

• Para saltar capítulos o titulo. • Para saltar canciones.

• Para encender o apagar la
unidad.

• Para parar la reproducción. • Para parar la reproducción.

• Para seleccionar subtítulos en
un disco.

• Para llamar el menú superior
en un disco.

•

Para seleccionar la posición de
DVD o posición del elevisor.

• Para ampliar parte de la
imagen. (x2/x4)

–

–

26

• Para seleccionar directamente
la canción.

• Para buscar en avance/retro­ceso en un disco.

• Para repetir entre los puntos A
y B elegidos.

•

Para seleccionar ESTÉREO,
L-ch o R-ch.

•

Para borrar los marcadores.

• Para retirar el Nº de estado en
la entrada de programa.

• Para borrar los números
entrados incorrectamente.

• Para borrar el punto para la
repetición A-B.

• Para indicar el modo de disco
actual.

• Para seleccionar el modo de
salida de DVD.

• Para activar el mando a dis­tancia en el modo DVD.

• Para mover el cursor y deter­minar su posición.

•

Para disponer el orden de repro­ducción o la reproducción aleatoria.

• Para activar/desactivar el
envolvente virtual.

• Para abrir o cerrar la bandeja
del disco.

• Para hacer una pausa en la
reproducción del disco.

• Para empezar la reproducción
del disco.

•

Para reproducir repetidamente
una canción o disco.

• Para volver a la operación
previa en el menú.

• Para buscar una canción.

• Para buscar la hora.

• Para colocar o buscar los
marcadores.

• Para llamar el menú de
programación de DVD.

• Para encender o apagar la
unidad.

•

Para seleccionar la posición de CD
o la posición del televisor.

Mode de grabadora de video

• Para seleccionar el canal.

• El botón +10 no tiene efecto
en el modo de grabadora de
vídeo.

• Para el avance/retroceso de
una cinta.

• Para salir del menú de la
grabadora de vídeo.

• Para reponer el contador de
cinta.

• Para indicar la hora actual,
contador de cinta y canal.

•

Para seleccionar un

ítem en el menú de la
grabadora de vídeo.

•

Para avanzar al

siguiente menú de la
grabadora de vídeo.

•

Para volver un paso

durante el ajuste del

• Para llamar el menú de la

•

•

• Para avanzar la reproducción

• Para empezar la reproducción

•

• Para llamar el menú de

• Para cambiar de canal.

•

• Para ver la cinta en cámara

• Para seleccionar la velocidad

• Para encender o apagar la

• Para parar la reproducción o

•

•

•

•

reloj y temporizador.

grabadora de vídeo.

Para expulsar el videocasete
de la grabadora de vídeo.

Para hacer una pausa de la repro­ducción o grabación de la cinta.

un cuadro a la vez.

de la cinta.

Para empezar una grabaciòn o
una grabaciòn de un toque.

búsqueda de índice u hora.

Para ajustar manualmente elseg­uimiento durante la reproducción.

lenta.

de grabación.

unidad.

grabación.
Para poner la grabadora de vídeo

en el modo de espera para una
grabación con temporizador.

Para seleccionar el modo de salida
de la grabadora de vídeo.
Para activar el mando a distancia en
el modo de la grabadora de vídeo.

Para seleccionar la posición de la graba­dora de vídeo o posición del televisor.

ES

STANDBY-ON

Quick Use Guide

SOURCE

VCR DVD

SOURCE button

DVD OUTPUT
light

VCR OUTPUT light

CHANNEL

SOURCE

VCR

OPEN/CLOSE

DVD

PREV STOP

DISC IN

PLAY

PLAY NEXT

DVD button

VCR button

STANDBY-ON

DISPLAY VCR DVD PAUSE

SLOW

VCR/TV

SKIP/CH.

PLAY

STOP

RECORD

MENU

SETUP TOP MENU

MODE ZOOM

SUBTITLE

T-SET

ANGLE

ENTER

RETURN

SEARCH

MODE

REPEAT A-B

OPEN/CLOSE

/EJECT

SPEED AUDIO

CLEAR/

C. RESET

1 2 3

4 5 6

7 8 9

0

+10

MENU

VCR

VCR

Connections

1

Please refer to “Basic TV Connection” on the front page
before you use this unit.

RF Output Channel

If channel 3 has been already occupied for broadcasting,

1) Set your TV to channel 4.

2) Insert a pre-recorded tape into this unit.

3) Press [SOURCE] on the unit so that the VCR OUTPUT

light is lit.

•

If noise appears on the TV screen, press [VCR/TV] on the
remote control.

4) Press [PLAY B] once.

5) After a few seconds, press and hold

[PLAY B] on the

unit for 3 seconds.

• The RF output channel will change to channel 4 from
channel 3 and you will see a playback picture.

• When a picture does not appear on the TV screen,
repeat step 4.

6) Press [STOP C] to stop playback.

Installing the Batteries for the Remote

2

Control

1

VCR/DVD Switching

3

2

3

✄

Press [B] to start Auto Set Up.

3

Do you connect the cable from the cable box or the satellite box to the unit’s
ANT-IN jack?

YES

Yes

Press [MENU] to exit.

No

Please wait for a few minutes.

CH 01

AUTO SET UP

NO

After scanning...

• The tuner stops on the lowest memorized channel.

• You can select only the channels memorized in this unit by using

[SKIP/CH. G/K, H/L] (or [CHANNEL K/L]).

• If “AUTO SET UP” appears on the TV screen again, check the cable

connections. Then, press [B] once again.

Clock Set Up

5

Press [MENU] and select “CLOCK SET“.

1

Then press [B] to go to next step.

or

• If the clock is not set, the CLOCK SET screen appears when you press

[MENU]. In this case, go to step 2.

Select the current month.

2

Then press [B] to go to next step.

or

Select the current day.

3

Then press [B] to go to next step.

or

- M E N U -

TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
B CLOCK SET
LANGUAGE SELECT

CLOCK SET

MONTH DAY YEAR
1 0 / – – – – – –

HOUR MINUTE AM/PM
– – : – – – –

CLOCK SET

MONTH DAY YEAR
1 0 / 0 2 – – – –

HOUR MINUTE AM/PM
– – : – – – –

Press [VCR] on the remote control.(Verify that the VCR OUTPUT

VCR MODE

light is lit.)

Press [DVD] on the remote control.(Verify that the DVD OUTPUT

DVD MODE

light is lit.)

Hint

• Pressing only [SOURCE] on the front panel DOES NOT switch the

mode of the remote control. You MUST select the correct mode on
the remote control.

Turn On the Unit for the First Time

4

1

2

Turn on the TV and set it to channel 3.

• If channel 3 has been already occupied for broadcasting,
see “RF Output Channel” section.

Select your language in the first time you turn on this unit.
Then press

[B]

to go to next step.

or

LANGUAGE SELECT

B ENGLISH [ON]
FRANCAIS
ESPAÑOL

–

27

Select the current year.

4

Then press [B] to go to next step.

Select the current hour.

5

Then press [B] to go to next step.

Select the current minute.

6

Then press [B] to go to next step.

Select “AM” or “PM”.

7

To exit the CLOCK SET screen

8

–

CLOCK SET

MONTH DAY YEAR
1 0 / 0 2 2 0 0 6

HOUR MINUTE AM/PM

or

or

or

or

– – : – – – –

CLOCK SET

MONTH DAY YEAR
1 0 / 0 2 MON 2 0 0 6

HOUR MINUTE AM/PM
0 5 : – – – –

CLOCK SET

MONTH DAY YEAR
1 0 / 0 2 MON 2 0 0 6

HOUR MINUTE AM/PM
0 5 : 4 0 – –

CLOCK SET

MONTH DAY YEAR
1 0 / 0 2 MON 2 0 0 6

HOUR MINUTE AM/PM
0 5 : 4 0 P M AM
B PM

EN

PLAY

PLAY

STOP

OPEN/CLOSE

/EJECT

Quick Use Guide

STANDBY-ON

DISPLAY VCR DVD PAUSE

SLOW

VCR/TV

SKIP/CH.

PLAY

STOP

RECORD

MENU

SETUP TOP MENU

MODE ZOOM

SUBTITLE

T-SET

ANGLE

ENTER

RETURN

SEARCH

MODE

REPEAT A-B

OPEN/CLOSE

/EJECT

SPEED AUDIO

CLEAR/
C. RESET

1 2 3

4 5 6

7 8 9

0

+10

PLAY

PLAY

STOP

STANDBY-ON

OPEN/CLOSE

/EJECT

VCR

DVD

1 2 3

4 5 6

7 8 9

0

+10

A-B

ANGLE

AUDIO

CLEAR/

C. RESET

DISPLAY

DVD

ENTER

MENU

MODE

OPEN/CLOSE

/EJECT

PAUSE

PLAY

RECORD

REPEAT

RETURN

SEARCH

MODE

SETUP

SKIP/CH.

SKIP/CH.

SLOW

SPEED

STANDBY-ON

STOP

SUBTITLE

T-SET

TOP MENU

VCR

VCR/TV

ZOOM

VCR Playback

6

Before: Turn on the TV and
set it to channel 3.

• If channel 3 has been already
occupied for broadcasting, see “RF
Output Channel” section.

Insert a video

1

cassette into this unit.

To stop

3

playback

DVD/CD Playback

7

Before: Turn on the TV, amplifier and any other
components which are connected to this unit.
Make sure the TV and audio receiver (commer­cially available) are set to the correct channel.

2

4

1 2

Insert a disc with
label facing up.

To start

3

8

playback

Remote Control

4

To start
playback

To eject the
cassette

To stop
playback

Disc/Tape

Button
(Alphabetical order)

DVD mode VCR mode

• To select chapter or title
directly.

•

To search forward/backward
through a disc.

•

To begin slow forward/reverse
playback in the pause mode.

• To repeat between your
chosen point A and B.

• To select camera angles on
a disc.

• To select audio languages
on a disc.

• To clear the markers.

• To clear the numbers
entered incorrectly.

• To cancel the point for A-B
repeat.

• To display the current disc
mode.

•

To select the DVD output mode.

• To activate the remote
control in DVD mode.

• To move the cursor and
determine its position.

•

To call up the Menu on a disc.

• To set black level on/off.

• To set virtual surround
on/off.

• To open or close the disc
tray.

• To pause disc playback.

• To advance playback one
frame at a time.

• To select track directly.

• To search forward/backward
through a disc.

•

To repeat between your cho-

sen point A and B.

• To select STEREO,
L-ch or R-ch.

•

To clear the markers.

• To remove status number in
program input.

• To clear the numbers
entered incorrectly.

• To cancel the point for A-B
repeat.

• To display the current disc
mode.

•

To select the DVD output mode.

• To activate the remote
control in DVD mode.

• To move the cursor and
determine its position.

• To arrange the playing order
or play randomly.

•

To set virtual surround on/off.

• To open or close the disc
tray.

• To pause disc playback.

• To select channel.

• The +10 button has no
effect in VCR mode.

• To forward/backward a tape.

• To exit the VCR Menu.

• To reset the tape counter.

• To display the current time,
tape counter, and channel.

• To call up the VCR Menu.

• To eject the video
cassette from the VCR.

• To pause tape playback or
recording.

• To advance playback one
frame at a time.

•

To select an item
on the VCR Menu.

•

To advance to the
next VCR Menu.

•

To go back one
step during clock
and timer setting.

• To begin disc playback. • To begin disc playback. • To begin tape playback.

• To start a recording or One
Touch Recording.

• To play a chapter or title
repeatedly.

• To return to the previous
operation in menu.

• To search chapter, title or
time.

•

To set or search the markers.

• To call up the DVD setup
menu.

• To skip chapters or titles. • To skip tracks.

• To play a track or disc
repeatedly.

• To return to the previous
operation in menu.

• To search track.

• To search time.

•

To set or search the markers.

• To call up the DVD setup
menu.

• To call up the index or time
search menu.

• To change channels.

• To adjust the tracking
manually during playback.

• To view the tape in slow
motion.

• To select the recording
speed.

• To turn the unit on/off. • To turn the unit on/off. • To turn the unit on/off.

• To stop playback. • To stop playback.

• To select subtitles on a disc.

• To call up the Top Menu on
a disc.

• To select DVD position or
TV position.

• To magnify part of a picture.
(x2/x4)

• To select CD position or TV
position.

• To stop playback or
recording.

•

To put the VCR into standby
mode for a Timer Recording.

• To select the VCR output mode.

• To activate the remote
control in VCR mode.

• To select VCR position or
TV position.

Printed in China

1VMN22563 / H986NUD★★★★★