Magnavox MVR650MG-17, MVR440MG-17, MVR450MG-17 User Manual
MVR440MG/17
MVR450MG/17
MVR650MG/17
Video Cassette Recorder
OWNER’S MANUAL
THANK YOU FOR CHOOSING MAGNAVOX.
N
EED HELP FAST?
READ YOUR QUICK-USE GUIDE AND/OR OWNER’S MANUAL FIRST FOR
QUICK TIPS THAT MAKE USING YOUR
MAGNAVOX PRODUCT MORE ENJOYABLE.
I
F YOU HAVE READ YOUR INSTRUCTIONS AND STILL NEED ASSISTANCE,
YOU MAY ACCESS OUR ONLINE HELP AT WWW.MAGNAVOX.COM
OR CALL
1-800-705-2000 WHILE WITH YOUR PRODUCT.
IMPORTANT!
RETURN YOUR WARRANTY REGISTRATION CARD WITHIN 10 DAYS.
S
EE WHY INSIDE.
Once your MAGNAVOX purchase is registered, you’re eligible to receive all the privileges of own-
ing a MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with
your purchase at once. And take advantage of these important benefits.
Return your Warranty Registration card today to
ensure you receive all the
benefits
you’re entitled to.
For Customer Use
Enter below the Serial No.which
is located on the rear of the cabinet.Retain this information for
future reference.
Model No. __________________
Serial No. __________________
Congratulations on your purchase,
and welcome to the “family!”
Dear MAGNAVOX product owner:
Thank you for your confidence in MAGNAVOX.You’ve selected
one of the best-built,best-backed products available today. And
we’ll do everything in our power to keep you happy with your
purchase for many years to come.
As a member of the MAGNAVOX “family,” you’re entitled to
protection by one of the most comprehensive warranties and
outstanding service networks in the industry.
What’s more,your purchase guarantees you’ll receive all the
information and special offers for which you qualify, plus easy
access to accessories from our convenient home shopping
network.
And most importantly you can count on our uncompromising
commitment to your total satisfaction.
All of this is our way of saying welcome-and thanks for investing
in a MAGNAVOX product.
P.S. Remember, to get the most from your
MAGNAVOX product, you must return your
Warranty Registration Card within 10 days. So
please mail it to us right now!
Know these
safetysymbols
This “bolt of lightning” indi-
cates uninsulated material
within your unit may cause an
electrical shock.For the safety of
everyone in your household,
please do not remove product
covering.
The “exclamation point”
calls attention to features
for which you should read
the enclosed literature closely to
prevent operating and maintenance problems.
WARNING: TO PREVENT
FIRE OR SHOCK HAZARD ,DO
NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
CAUTION: To prevent electric
shock, match wide blade of plug
to wide slot,fully insert.
ATTENTION: Pour éviter les
choc électriques, introduire la
lame la plus large de la fiche dans
la borne correspondante de la
prise et pousser jusqu’au fond.
R
E
G
I
S
T
R
A
T
I
O
N
N
E
E
D
E
D
W
I
T
H
I
N
1
0
D
A
Y
S
Hurry!
Warranty
Verification
Registering your product within
10 days confirms your right to
maximum protection under the
terms and conditions of your
MAGNAVOX warranty.
Owner
Confirmation
Your completed Warranty
Registration Card serves as
verification of ownership in the
event of product theft or loss.
Model
Registration
Returning your Warranty
Registration Card right away
guarantees you’ll receive all
the information and special
offers which you qualify for as
the owner of your model.
Visit our World Wide Web Site at http://www.magnavox.com
Introduction 3
This manual describes the MVR440MG/17,MVR450MG/17, and
MVR650MG/17. The MVR440MG/17 and MVR450MG/17 have a
single sound channel,but the MVR650MG/17 has stereo sound
(right and left sound channels).Otherwise, these models look and
operate the same.This manual illustrates the MVR650MG/17.
Features
• Automatic Channel Setup
• Automatic Head Cleaner
• Automatic Tracking Adjustment
• Hi-Fi Stereo Sound (MVR650MG/17 only)
• MTS (Multi-Channel Television Sound) (MVR650MG/17 only)
• 19 micron head - Improves the picture quality
• On-Screen Displays in English,French and Spanish
• One-Touch Recording
• Real-Time Counter
• Repeat Play
• Search Functions:Index, Time
• Timer Recording
Package contents
The following items are provided with your new VCR.
• Remote Control and two AA batteries
• One RF coaxial cable, 75 ohm
• This Owner’s manual and Quick-Use Guide
Safety Precautions
Warning:To prevent fire or shock hazard, do not expose
this equipment to rain or moisture.
Federal Communications Commission Warning:Any unauthorized changes or modifications to this equipment void
the user’s authority to operate it.
This VCR has a High Quality (HQ) system and is compatible with
existing Video Home System (VHS) equipment.
Magnavox recommends you use only video cassettes that have the
mark.Using other tapes may result in poor picture quality
and excessive deposits on the video heads,which may not be covered by the warranty if damage occurs.
Note to the Cable TV System Installer: This reminder is provided to call the Cable TV system installer’s attention to Article
820-40 of the National Electrical Code, which provides guidelines
for proper grounding – in particular, specifying that the cable
ground shall be connected to the grounding system of the building,
as close to the point of cable entry as possible.
Declaration of Conformity
Model Numbers: MVR440MG/17,MVR450MG/17,
MVR650MG/17
Trade Name: Magnavox
Responsible Party: Philips Consumer Electronics
P.O.Box 14810
Knoxville, TN 37914-1810
(865) 521-4316
Copyright 2004 Magnavox. All rights reserved.
• Before doing anything else, record the
VCR’s model and serial numbers in
the spaces provided on page two.
These numbers will help us assist you
if you ever call for help.
• Your new product and its packaging
contain materials that can be recycled and reused. Specialized companies can recycle your product to
increase the amount of reusable
materials and to minimize the
amount that needs to be properly disposed.
Your product uses batteries that
should not be thrown away when
depleted but should be disposed of as
small chemical waste.
Please find out about the local regulations on disposal of your old product,
batteries, and packaging whenever
you replace existing equipment.
Helpful Hints
4 Table of Contents
Setting Up Your VCR
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Before Using Your VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Hookups:No Cable Box/Satellite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-7
Hookups with Cable Box/Satellite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9
Hookups with a Stereo TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Turning on Your VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Automatic Channel Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-13
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14-15
Language Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Description of Controls
On-Screen Status Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-19
Display Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Basic Operations
Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Recording
One-Touch Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26-30
Recording One Channel/Watching Another . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Rerecording (Tape Duplication) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Playing
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Special Effects Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Real-Time Counter Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Index Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Automatic Playback Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Additional Features
MTS Broadcast Stereo (MVR650MG/17) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39-40
Hi-Fi Stereo (MVR650MG/17) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Information You May Need
Helpful Hints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42-43
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Before Using Your VCR 5
Putting Batteries in the Remote Control
VCR maintenance
● In this VCR, use only tapes with the mark.
● Make sure any light adhesive stick-on notes are removed from
the videotape before putting the tape in the VCR. Removable
labels can jam the VCR.
● Periodic maintenance is required to maintain your VCR’s excellent
performance. This VCR has a built-in Automatic Head Cleaner.
However, the video heads will require replacement eventually. Only
an authorized service center should perform this service .
Using the Remote Control
● Point the remote at the VCR’s remote sensor (see page 21) when
using the remote to operate the VCR.
● Do not put objects between the remote and the VCR.
Recording Prevention
Videotapes have record tabs to ensure that recordings are not
erased accidentally.
1
To prevent recording,break off the tab with a screwdriver.
2
To allow recording,cover the hole with cellophane tape.
• Do not mix alkaline and manganese batteries.
• Do not mix old and new batteries.
Helpful Hints
1
3
2
1
2
1
Remove the battery compartment lid on the bottom of
the remote by sliding the lid in the direction of the arrow.
2
Insert two AA batteries inside the battery compar tment
with their +and – ends aligned as indicated.
3
Replace the battery compartment lid.
ANT
AUDIO
VIDEO
IN
OUT
OUT IN
OUT
L
R
IN
AUDIO
R
L
VIDEO
OUT
IN
IN
OUT
OUT
IN
ANT
OR
75
ANT /
CABLE
OR
75
ANT /
CABLE
6 Hookups: No Cable Box/Satellite
The basic VCR/TV connection – antenna/Cable TV signal to VCR to TV – is shown below. If you
have a Cable Box or Satellite Receiver, see pages eight-nine. If you have a Stereo TV, see page
10. After you hook up the VCR, go to page 11 to turn on the VCR.
(The MVR650MG/17 is illustrated here. The MVR440MG/17 and MVR450MG/17 have single AUDIO
IN/OUT jacks.)
ANTENNA IN Jack
(on back of TV)
Antenna or Cable TV signal
(75 ohm)
Antenna
Indoor/Outdoor
(300 ohm)
Antenna or Cable TV signal
(75 ohm)
Antenna
Indoor/Outdoor
(300 ohm)
1
Disconnect the antenna or Cable TV signal from your TV.
2
Connect the antenna or Cable TV signal to the ANT(enna) IN Jack of your VCR.
Back of VCR
ANT
AUDIO
VIDEO
IN
OUT
OUT IN
OUT
L
R
IN
7
5
A
N
T
/
C
A
B
L
E
AUDIO
R
L
VIDEO
OUT
IN
IN
OUT
OUT
IN
ANT
75
ANT /
CABLE
RF coaxial cable
Antenna or
Cable TV
signal
Hookups: No Cable Box/Satellite (cont’d) 7
ANTENNA IN Jack
(on back of TV)
example only
3
Connect the RF coaxial cable (supplied) to the OUT Jack on the back of the VCR and to
the Antenna In jack on the TV. (You may use either a snap-on type (supplied) or screw-on type,
whichever you prefer.)
4
Plug in the AC power cords of the TV and the VCR.
5
Set the TV to channel 3. This is the VCR’s preset RF output channel.
If you cannot use channel 3 at your TV,use channel 4 instead. To change the VCR’s output channel to
4,press and hold PLAY on the VCR for three seconds during tape play. The VCR’s RF output channel
will alternate between 3 and 4 each time you do this. There is not a channel 3/4 switch on the VCR.
You must change the RF output channel as described.
● If the RF output channel does not change , stop tape play,then star t play again. Try again to press
and hold PLAY on the front of the VCR for three seconds during tape play.
● If the power fails or if you unplug the VCR’s power cord for more than 30 seconds,the RF output
channel will return to channel 3.
6
You are ready to turn on the VCR. Please go to page 11 for directions before turning on
the VCR.
8 Hookups with Cable Box/Satellite
There are two ways to connect your Cable Box/Satellite to the VCR.With this connection:
● You may view any channel.Select channels at the Cable Box/Satellite,not at the VCR.
● You may not view a channel other than the one you are recording.
● Do not set up channels at the VCR.
● Program a timer recording for one channel at a time.Set the TV and the VCR to the Cable Box/Satellite
output channel (03 or 04);set the RF output channel of the VCR to the same channel (see page seven).Set
your Cable Box/Satellite to the channel you want to record. When you enter the channel you want to
record in a timer recording, enter 03 or 04 (the Cable Box/Satellite output channel). (This is step 7 on page
28.) Leave the Cable Box/Satellite on for a timer recording.
ANT
AUDIO
VIDEO
IN
OUT
OUT IN
OUT
L
R
IN
OUT
IN
75
ANT /
CABLE
TV’s
ANTENNA IN
Jack
Cable Box/Satellite
VCR
Connections
1
Connect a Cable TV or Satellite signal to the IN Jack on the
Cable Box/Satellite.
2
Use an RF coaxial cable (supplied) to connect the OUT Jack
on the Cable Box/Satellite to the ANT(enna) IN Jack on the
VCR.
3
Use a second RF coaxial cable to connect the OUT Jack on
the VCR to the TV’s ANTENNA IN jack.
Recording/Viewing Any Channel
1
With the VCR on and in VCR position (the green VCR/TV
light will appear on the display panel),use CH to set
the VCR to the Cable Box/Satellite output channel
(03 or 04).
2
Set the VCR’s RF output channel to 3 or 4. The default
setting is channel 3.See page seven. Set the TV to the
same channel.
3
Select the channel you want to view/record at the
Cable Box/Satellite.
1
2
3
Cable TV or
Satellite
Signal
RF coaxial
cable
RF coaxial
cable
Hookups with Cable Box/Satellite (cont’d) 9
ANT
AUDIO
VIDEO
IN
OUT
OUT IN
OUT
L
R
IN
IN
OUT
75
A
N
T
/
C
A
B
LE
With this connection:
● You may watch one channel while recording another.
● You may not record scrambled channels.
TV’sANTENNA
IN Jack
Cable Box/Satellite
VCR
• When you play a tape, set the
Cable Box/Satellite to the same
channel as the RF output channel
of the VCR. (See page seven.) Set
the TV to the Cable Box/Satellite
output channel (03 or 04).
Helpful Hint
1
2
3
Cable TV or
Satellite
Signal
RF coaxial
cable
RF coaxial
cable
Connections
1
Connect a Cable TV or Satellite signal to the VCR’s
ANT(enna) IN Jack.
2
Use an RF coaxial cable (supplied) to connect the OUT Jack
on the VCR to the IN Jack on the Cable Box/Satellite.
3
Use a second RF coaxial cable to connect the OUT Jack on
the Cable Box/Satellite to the ANTENNA IN Jack on the TV.
Recording One Channel/Watching Another
1
Put the Cable Box/Satellite on the same channel as
the VCR’s RF output channel. The default is channel 3.
See page seven.
Set the TV to the Cable Box/Satellite output channel (03 or
04).
Then, with the VCR in VCR position (the green
VCR/TV light will appear on the display panel), use
CH to select the channel you want to record
at the VCR. Start the recording.
2
Press VCR/TV once to put the VCR in TV position.
(The VCR/TV light will disappear.)
3
Select the channel you want to watch at the Cable
Box/Satellite.
10 Hookups with a Stereo TV
ANT
AUDIO
VIDEO
IN
OUT
OUT IN
OUT
L
R
IN
Antenna or Cable TV signal
to ANT(enna) IN Jack
Video Cable
Audio Cable
VIDEO (yellow) and AUDIO
(red and white) OUT Jacks
Audio and Video
IN Jacks on TV
● Audio and Video cables are not supplied.
1
2
3
• If your TV has only one AUDIO
IN jack, connect a single audio
cable to the white AUDIO OUT
jack on the VCR and to the white
AUDIO IN jack on the TV. See
your TV manual for details of
connecting a VCR to the TV.
Helpful Hint
1
Connect the antenna or Cable TV signal to the
ANT(enna) IN Jack on the back of the VCR.
2
Connect a video cable to the VCR’s yellow VIDEO
OUT Jack and to the TV’s VIDEO IN Jack.
3
MVR650MG/17
Connect a stereo audio cable to the VCR’s red and
white AUDIO OUT Jacks and to the TV’s AUDIO IN
Jacks. Match cable colors to jack colors.
MVR440MG/17, MVR450MG/17
Connect a “Y” splitter audio cable to the VCR’s
white AUDIO OUT Jack and to the TV’s AUDIO IN
Jacks.
4
Turn on your TV, making sure it is in Line Input or
Auxiliary mode.Your TV may refer to this as an Audio/Video
In channel,or A/V In,External In, Auxiliar y In, etc. Such channels are usually located near channel zero (0).Or,your TV
remote may have a button or switch that selects different
Video or Auxiliar y channels. See your TV manual for details.
ANT
AUDIO
VIDEO
IN
OUT
OUT IN
Antenna or Cable TV signal
to ANT(enna) IN Jack
Video Cable
Audio Cable
VIDEO (yellow) and
AUDIO (white) OUT Jacks
Audio and Video
IN Jacks on TV
1
2
3
MVR650MG/17
MVR440MG/17, MVR450MG/17
CH
321
654
987
0
POWER
STATUS
SLOWREC MEMORY
SPEED
SEARCH MODE STILL/PAUSE
VCR/TV EJECT
M
EN
U
CLEAR
REW
PLAY
STOP
F.FWD
Turning on Your VCR 11
●Before turning on your VCR, make sure batteries are in the
remote and the VCR and TV are connected (see pages 5-10).
●You cannot set up channels if you are using a Cable Box/Satellite.
●The instructions on this page only work when you turn on the
VCR for the first time. If there is a power failure or if the VCR is
unplugged for more than 30 seconds,repeat this procedure.
1
Press POWER. The POWER light and the VCR/TV light
will appear.
2
Turn on the TV. Set it to the same channel as the RF
output channel of the VCR (see page seven). If you
connected the VCR to a TV using Audio/Video cables, choose
the A/V In or Auxiliary In or Line Input channel at the TV.The
menu shown below will appear.
2
1
Turn on the TV.
• If you do not see any displays
when you turn on the VCR, check
your hookups, then try again. If
you still do not see any displays,
follow the steps under “Automatic
Channel Setup” on page 12 and
“Language Selection” on page 16.
• If you try to set up channels when
there is no antenna or cable connected to the VCR, programming
will appear to take place.
Eventually,AUTO SET UP will
appear on the screen steadily, and
channel programming will stop.
Connect an antenna or cable to
the ANT(enna) IN jack of the VCR,
then press F.FWD again. Channel
programming will begin again.
• To stop channel setup, press
CLEAR.
Helpful Hints
3-5
LANGUAGE SELECT
B ENGLISH [ON]
FRANCAIS
ESPAÑOL
PUSH F.FWD
3
Press PLAY or STOP to select ENGLISH, FRANCAIS
or ESPAÑOL. [ON] will appear beside your choice.
4
Press F.FWD. AUTO SET UP will appear on the screen.
5
Press F.FWD to begin automatic channel setup.
AUTO SET UP will flash on the screen and channels will
count up on the screen as setup progresses.When channels
are set up,the VCR will go to the lowest channel available.
The VCR will memorize all available channels,so when you
use CH to change TV channels at the VCR, you’ll only
scan through channels you receive.
AUTO SET UP
PUSH F.FWD
12 Automatic Channel Setup
Although your VCR may set channels when you turn it on the first
time, you may set up channels again.Make sure:
●The VCR is on and is in VCR position. (The VCR/TV light will
appear on the display panel.If it does not,press VCR/TV once .)
●Your antenna or Cable TV signal is connected to the VCR. See
pages six-10.
1
Press MENU until MENU appears.
•
Line Input mode is always channel
001 or 002. Select these channels
with the Number buttons or CH
. Choose L1 if you connect-
ed other equipment to
the AUDIO
and VIDEO IN jacks on the back
of the VCR. Choose L2 if you connected other equipment to the
AUDIO and VIDEO In jacks on
front of the VCR.
• You cannot program channels if
you are using a Cable
Box/Satellite. See pages eight-nine.
• To stop channel setup, press
CLEAR.
Helpful Hints
- M E N U -
TIMER PROGRAMMING
AUTO REPEAT [OFF]
B CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO [ON]
SAP
- M E N U -
B TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO [ON]
SAP
2
Press PLAY or STOP repeatedly to select CHANNEL
SET UP. Press F.FWD.
3
Press PLAY or STOP repeatedly to select AUTO SET
UP.
4
Press F.FWD. The VCR will memorize all available channels.
AUTO SET UP will flash and channels will count up as setup
progresses.When setup is complete, the lowest channel you
receive will appear on the TV screen.
MVR650MG/17 only
MVR650MG/17 only
CH
321
654
987
0
POWER
STATUS
SLOWREC MEMORY
SPEED
SEARCH MODE STILL/PAUSE
VCR/TV EJECT
M
EN
U
CLEAR
REW
PLAY
STOP
F.FWD
1
2-4
CHANNEL SET UP
B AUTO SET UP
MANUAL SET UP
CH
321
654
987
0
POWER
STATUS
SLOWREC MEMORY
SPEED
SEARCH MODE STILL/PAUSE
VCR/TV EJECT
M
EN
U
CLEAR
REW
PLAY
STOP
F.FWD
Automatic Channel Setup (cont’d) 13
2-5
• To add or delete more than one
channel, repeat steps 4-5 for all
the channels.Then press CLEAR
to save all the settings.
Helpful Hint
Adding/Deleting Channels
Delete channels you no longer receive or seldom watch from the
memory. Or,add new channels.Make sure:
●The VCR is on and in VCR position. (The VCR/TV light will
appear. If it does not, press VCR/TV once.)
1
Press MENU until MENU appears.
2
Press PLAY or STOP repeatedly to select CHANNEL SET UP. Press F.FWD.
1
6
CHANNEL SET UP
AUTO SET UP
B MANUAL SET UP
MANUAL SET UP
CHANNEL 30 (CATV)
ADD
- M E N U -
TIMER PROGRAMMING
AUTO REPEAT [OFF]
B CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO [ON]
SAP
3
Press PLAY or STOP repeatedly to select MANUAL
SET UP. Press F.FWD.
4
Press PLAY or STOP repeatedly until your desired
channel number appears.
5
Press F.FWD or REW so ADD or DELETE flashes on
the screen.
6
While your choice is flashing, press CLEAR. The chan-
nel you added or deleted will appear. The channel will be
added or deleted,whichever was flashing on the screen when
you exited the menu.
MVR650MG/17 only
CH
321
654
987
0
POWER
STATUS
SLOWREC MEMORY
SPEED
SEARCH MODE STILL/PAUSE
VCR/TV EJECT
M
EN
U
CLEAR
REW
PLAY
STOP
F.FWD
14 Setting the Clock
Follow the steps below to set your VCR’s clock. Make sure:
● The VCR is on and in VCR position. (The VCR/TV light will appear.
If it does not,press VCR/TV once.)
1
Press MENU until MENU appears.
• If the clock has never been set,
the CLOCK SET menu may
appear immediately when you
press MENU. If this happens, follow the instructions from step 3
above.
• To display the time on the TV,
press STATUS repeatedly.
• Power failures exceeding 30 seconds can erase your clock setting.
• Press REW to go back one step.
Helpful Hints
1
2-4
- M E N U -
B TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO [ON]
SAP
CLOCK SET
MONTH DAY YEAR
– – / – –– – – –
HOUR MINUTE AM/PM
– – : – –– –
2
Press PLAY or STOP repeatedly to select CLOCK
SET. Press F.FWD.
3
While MONTH is flashing, press PLAY or STOP
repeatedly until the desired month appears.
Press F.FWD.
4
While DAY is flashing, press PLAY or STOP repeatedly until the desired day appears. Press F.FWD.
MVR650MG/17 only
CLOCK SET
MONTH DAY YEAR
0 3 / – –– – – –
HOUR MINUTE AM/PM
– – : – –– –
CLOCK SET
MONTH DAY YEAR
0 3 / 1 8 – – – –
HOUR MINUTE AM/PM
– – : – –– –
CH
321
654
987
0
POWER
STATUS
SLOWREC MEMORY
SPEED
SEARCH MODE STILL/PAUSE
VCR/TV EJECT
M
ENU
CLEAR
REW
PLAY
STOP
F.FWD
Setting the Clock (cont’d) 15
• To reset the clock, follow steps 1-2
on page 14. Select information to
change using F.FWD or REW.
When the desired information is
flashing, use PLAY or STOP to
enter the correct information.
Press CLEAR to remove the menu.
Helpful Hint
CLOCK SET
MONTH DAY YEAR
0 3 / 1 8 THU 2 0 0 4
HOUR MINUTE AM/PM
0 5 : 4 0 – –
CLOCK SET
MONTH DAY YEAR
0 3 / 1 8 THU 2 0 0 4
HOUR MINUTE AM/PM
0 5 : 4 0 P M AM
B PM
5-9
9
5
While YEAR is flashing, press PLAY or STOP repeatedly until the desired year appears. Press F.FWD. The
day of the week will appear automatically.
6
While HOUR is flashing, press PLAY or STOP
repeatedly until the desired hour appears.
Press F.FWD.
7
While MINUTE is flashing, press PLAY or STOP
repeatedly until the desired minute appears.
Press F.FWD.
8
While AM/PM is flashing, press PLAY or STOP repeatedly to point to AM or PM. Your selection will flash on the
screen in the AM/PM space.
9
Press CLEAR or F.FWD to start the clock.
CLOCK SET
MONTH DAY YEAR
0 3 / 1 8 THU 2 0 0 4
HOUR MINUTE AM/PM
– – : – –– –
CLOCK SET
MONTH DAY YEAR
0 3 / 1 8 THU 2 0 0 4
HOUR MINUTE AM/PM
0 5 : – –– –
Loading...