Magnavox MC132EMG-17 User Manual

MC132EMG/17

COLOR TV WITH BUILT-IN VCR

OWNER’S MANUAL

THANK YOU FOR CHOOSING MAGNAVOX.

EED HELP FAST?

READ YOUR QUICK-USE GUIDE AND/OR OWNER’S MANUAL FIRST FOR QUICK

TIPS THAT MAKE USING YOUR

MAGNAVOX PRODUCT MORE ENJOYABLE.

F YOU HAVE READ YOUR INSTRUCTIONS AND STILL NEED ASSISTANCE,

YOU MAY ACCESS OUR ONLINE HELP AT WWW.MAGNAVOX.COM

OR CALL 1-800-705-2000 WHILE WITH YOUR PRODUCT.

IMPORTANT!

RETURN YOUR WARRANTY REGISTRATION CARD WITHIN 10 DAYS.

SEE WHY INSIDE.

Once your MAGNAVOX purchase is registered, you’re eligible to receive all the privileges of own- ing a MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits.

Return your Warranty Registration card today to

ensure you receive all the

benefits

you’re entitled to.

For Customer Use

Enter below the Serial No. which is located on the rear of the cabinet. Retain this information for future reference.

Model No.________________ Serial No. ________________

Congratulations on your purchase, and welcome to the “family!”

Dear MAGNAVOX product owner:

Thank you for your confidence in MAGNAVOX.You’ve selected one of the best-built, best-backed products available today. And we’ll do everything in our power to keep you happy with your purchase for many years to come. As a member of the MAGNAVOX “family,” you’re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry. What’s more, your purchase guarantees you’ll receive all the information and special offers for which you qualify, plus easy access to accessories from our convenient home shopping network. And most importantly you can count on our uncompromising commitment to your total satisfaction. All of this is our way of saying welcome-and thanks for investing in a MAGNAVOX product.

P.S. Remember, to get the most from your

MAGNAVOX product, you must return your Warranty Registration Card within 10 days. So please mail it to us right now!

Know these

safetysymbols

This “bolt of lightning” indi-

cates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering.

The “exclamation point”

calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.

ATTENTION: Pour éviter les choc électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu’au fond.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Hurry!

Warranty Verification

Registering your product within 10 days confirms your right to maximum protection under the terms and conditions of your MAGNAVOX warranty.

Owner Confirmation

Your completed Warranty Registration Card serves as verification of ownership in the event of product theft or loss.

Model Registration

Returning your Warranty Registration Card right away guarantees you’ll receive all the information and special offers which you qualify for as the owner of your model.

Visit our World Wide Web Site at http://www.magnavox.com

Introduction 3

• Automatic Channel Setup

• Automatic Head Cleaner

• Automatic Tracking Adjustment

• Closed Caption

• Daylight-Savings Time

• English, Spanish, or French displays

and menus

• One-Touch Recording

• Remote Control or Front Panel

menu access

• Rental Playback

• Repeat Play

• ShowGuardTM- Indefinite Timer

Recording memory

• Sleep Timer

• Special Effects: Forward and Reverse

Searching; Still

• Time Search

• Timer Recording

• Wake Up Timer

• Zero Return

Safety Precautions

Warning:To prevent fire or shock hazard, do not expose this equipment to rain or moisture. Federal Communications Commission (FCC) Warning: Any unauthorized changes or modifications to this equipment void the user’s authority to operate it. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

Magnavox recommends you use only videotapes that have the mark. Other tapes may cause poor picture quality and excessive deposits on the video heads that the warranty may not cover if damage occurs. This TV/VCR has a High Quality (HQ) system and is compatible with existing Video Home System (VHS) equipment. Note to the Cable TV System Installer: This reminder calls the Cable TV system installer’s attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper grounding – in particular, specifying that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as possible.

Declaration of Conformity

Model Numbers: MC132EMG/17 Trade Name: Magnavox Responsible Party: Philips Consumer Electronics

P.O. Box 14810 Knoxville,TN 37914-1810 (865) 521-4316

Welcome to your TV/VCR owner’s manual, which describes these features.

As an ENERGY STAR®Partner,Magnavox has determined that this product meets the ENERGY STA R®guidelines for energy efficiency. E

NERGY STAR

is a U.S. registered mark. Using products with the ENERGY STA R®label can save

energy. Saving energy reduces air pollution and lowers utility bills.

ShowGuard

is a trademark of Philips Consumer Electronics.

4 Table of Contents

First-time Setup

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Before Using the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Hooking Up the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-7

Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Basic Operations

Playing a Videotape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Basic Controls

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Additional Setup Features

Setting TV Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Adding/Deleting Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16-19

Daylight-Savings Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Picture Control, Status Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Recording Options

Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22-24

Timer Recording Auto Return . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Rerecording (Tape Duplication) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

One-Touch Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Playing Options

Playback Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Rental Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Zero Return,Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Additional Features

Setting V-Chip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32-34

Closed Caption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Wake Up Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Automatic Operation Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Information You May Need

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Helpful Hints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40-41

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Before Using the TV/VCR 5

Using the Remote Control

● Point the remote control at the front of the TV/VCR.

● Do not put objects between the remote control and the

TV/VCR.

TV/VCR Maintenance

● In this TV/VCR, use only tapes with the mark.

● Remove any light adhesive stick-on notes from the videotape

before putting the tape in the TV/VCR. Removable labels can jam the TV/VCR.

● The TV/VCR requires periodic maintenance to maintain its

excellent performance.This TV/VCR has an internal automatic head cleaning system. However, the video heads will eventually require cleaning or replacement. Only an authorized service center should perform this service.

Putting Batteries in the Remote Control

Remove the battery compartment lid on the bot-

tom of the remote control by sliding the lid down and off, following the direction of the arrow on the lid.

Place two AA batteries inside the battery compartment with their +and –ends aligned as indicated.

Replace the battery compartment lid.

Battery Safety

Battery Usage CAUTION - To prevent battery leakage that may result in bodily injury, property damage, or damage to the unit:

● Install ALL batteries correctly, with the + and - markings on

the battery aligned as indicated on the unit;

● Do not mix batteries, for example, old with new or carbon

with alkaline; and

● Remove batteries when the unit will not be used for a long

time.

Recording Prevention

Videotapes have record tabs to ensure you do not erase recordings accidentally.

To prevent accidental recording, break off the tab with a screwdriver.

To record again on the same tape, cover the hole with cellophane tape.

• Your new product, its packaging, and this manual contain materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount that needs to be properly disposed. Your product uses batteries that should not be thrown away when depleted but should be disposed of as small chemical waste. Please find out about the local regulations on disposal of your old product, batteries, manual, and packaging when you replace existing equipment.

Helpful Hint

6 Hooking Up the TV/VCR

ANT.

OUT

ANT.

Connect an RF coaxial cable (75-ohm, not supplied) to the OUT Jack on the Cable Box/Satellite Receiver and to the ANT(enna) Jack on the TV/VCR.

Connect a Cable TV signal or an antenna to the ANT(enna) Jack.

Hook up your TV/VCR using one of the connections shown.

ANT.

Rod Antenna

(not supplied)

Connect the Cable TV or Satellite signal to the IN Jack on the Cable Box/Satellite Receiver.

RF coaxial cable

(not supplied)

Hooking Up Your TV/VCR With a Cable TV Signal or Outdoor Antenna

Hooking Up Your TV/VCR With a Cable Box/Satellite Receiver

To view any channel, set the TV/VCR to the Cable Box/Satellite Receiver output channel (channel 03 or 04). Then, select channels at the Cable Box/Satellite Receiver.

Hooking Up Your TV/VCR With an Indoor Antenna

To install a rod antenna (not supplied), push the stem of the antenna into the antenna hole on the rear of the TV/VCR. Connect the antenna wire to the ANT(enna) Jack on the rear of the TV/VCR as shown. Extend the antenna and adjust its length, direction, and angle for the clearest picture.

Hooking Up the TV/VCR (cont’d) 7

VIDEO AUDIO

POWER VOLUME CHANNEL STOP/EJECTREW PLAY F.FWD REC/OTR

EARPHONE

OUT

VIDEO

OUT

3CH 4CH

AUDIO

ANT.

OUT

VIDEO

OUT

3CH 4CH

AUDIO

ANT.

VIDEO AUDIO

• Before connecting an antenna or Cable TV or Satellite signal to the ANT(enna) Jack, make sure the pin is not bent. If the pin is bent, straighten it as illustrated.

• Audio and video cables are not supplied.

• If your VCR, Camcorder, or DVD Player has stereo Audio Out jacks (red and white), connect only the white jack to the TV/VCR’s white AUDIO In jack. Otherwise, you will need a stereo-to-mono or “splitter” audio cable.

Helpful Hints

Crooked Pin

Straight Pin

Bent pin

Plug

Cable

AUDIO/VIDEO In Jacks

on front of TV/VCR

AUDIO/VIDEO OUT

Jacks on VCR (example)

Connect an Audio cable to the AUDIO OUT Jack on the VCR and to the AUDIO In Jack (white) on the front of the TV/VCR.

Connect a Video cable to the VIDEO OUT Jack on the VCR and to the VIDEO In Jack (yellow) on the front of the TV/VCR.

When all connections are complete, plug in the TV/VCR’s power cord.

Hooking Up Your TV/VCR to Another Video Source (VCR, Camcorder, DVD Player, etc.)

You may need this connection if you want to copy tapes, view tapes playing on a VCR or Camcorder, or view Discs from a DVD Player. Select channel 00 (AUX) at the TV/VCR when viewing tapes/Discs playing on the VCR, Camcorder, or DVD Player.

8 Menu Language

• If the menu is in Spanish or French but you prefer English, press MENU. Press PLAY/▲or STOP/▼to select IDIOMA [ESPAÑOL] or LANGAGE [FRANÇAIS], then press F.FWD/B to select ENGLISH. Press MENU to remove the menu.

Helpful Hint

TIME SEARCH

MUTE

RECORD

SPEED RESET

8 97

5 64

2 31

PAUSE/STILL

100

STOP

F.FWD

PLAY

REW

VOL.

DISPLAY

POWER

SLEEP/WAKE UP

CH.

T.C

2-3

This affects the language of the TV/VCR’s menu, not TV pro- gramming, videotapes, or closed captioning.

Press POWER to turn on the TV/VCR.

Press MENU. Press PLAY/▲ or STOP/▼ to select LANGUAGE.

Press F.FWD/B or REW/s to select ENGLISH, ESPAÑOL (Spanish), or FRANÇAIS (French).

Press MENU to remove the menu.

– M E N U –

TIMER PROGRAMMING

PICTURE CONTROL SETTING CLOCK CHANNEL SET UP USER’S SET UP

V-CHIP SET UP

B LANGUAGE [ENGLISH]

CAPTION [OFF] ZERO RETURN

TIME SEARCH

Playing a Videotape 9

• If the tape you want to play is already in the TV/VCR, turn on the TV/VCR power, then press PLAY/▲ .

• Playback features and options are on pages 28-31.

• When you play an S-VHS format tape, you cannot get the high resolution that would be available on an S-VHS VCR. Noise lines (black and white streaks) may appear in the picture.

Helpful Hints

Follow the steps below to play a tape.

Insert a tape in the TV/VCR’s cassette com- partment.

The power will come on. If the tape’s

record tab is missing, play should start automatically.

If play does not start automatically, press PLAY/▲ to start play.

Press STOP/▼ to stop play.

Press REW(ind)/{ to rewind the tape.

When the tape finishes rewinding, press STOP/EJECT on the front of the TV/VCR to remove the tape.

TIME SEARCH

MUTE

RECORD

SPEED RESET

8 97

5 64

2 31

PAUSE/STILL

100

STOP

F.FWD

PLAY

REW

VOL.

DISPLAY

POWER

SLEEP/WAKE UP

CH.

T.C

2-4

Insert a tape.

Press STOP/EJECT on the TV/VCR to remove the tape.

10 Recording

• You cannot record one channel while watching another.

• Recording options are on pages 22-27.

• If you pause a recording for more than five minutes, the TV/VCR will resume recording automatically.

• You can change the tape speed with the SPEED button while a recording is in progress, but some distortion may appear on the tape.

Helpful Hints

Follow the steps below to record a current TV program.

Place a tape with its record tab intact (see page five) in the TV/VCR.

The power will come on. Or,if the tape is already in the TV/VCR, press POWER to turn on the TV/VCR if necessary.

Press SPEED until the desired tape speed (SP or SLP) appears on the TV/VCR screen. See tape

speed details below.

Use CH(annel) o/p or the Number buttons to select the channel you want to record.

You cannot change channels during recording.

Press RECORD once to start recording.The

REC/OTR light will flash. If the tape does not have a record tab, the TV/VCR will eject the tape immediately. Insert another tape and try again.

To pause the recording (for example, during commercials), press PAUSE/STILL. To resume recording, press PAUSE/STILL again or press RECORD.

To stop recording,press STOP/▼.

Cassette type / Playback Time Tape Speed T160 T120 T60 SP

(Standard Play) 2 hrs.

2 hrs. 1 hr.

40 mins.

LP(Long Play) 5 hrs.

4 hrs. 2 hrs.

(playback only) 20 mins.

SLP(Super Long Play)

8 hrs. 6 hrs. 3 hrs.

Tape Speeds

This chart shows the recording/playback time for three types of video cassettes (T160,T120, and T60).There are three playback speeds: SP, LP, and SLP.A tape will play only in the speed in which it was recorded.When recording, you can change the tape speed using the SPEED button.You cannot record in LP speed on this TV/VCR. The slower the speed, the more programming you can fit on the tape. SLP is the slowest speed.A faster speed gives better picture quality. SP is the fastest speed.

TIME SEARCH

MUTE

RECORD

SPEED RESET

8 97

5 64

2 31

PAUSE/STILL

100

STOP

F.FWD

PLAY

REW

VOL.

DISPLAY

POWER

SLEEP/WAKE UP

CH.

T.C

4-5

TIME SEARCH

MUTE

RECORD

SPEED RESET

8 97

5 64

2 31

PAUSE/STILL

100

STOP

F.FWD

PLAY

REW

VOL.

DISPLAY

POWER

SLEEP/WAKE UP

CH.

ALT.CH

F.FWD/B (fast forward) Button

Press to fast forward the tape. Details are on page 28. Press to select a menu item or to change a menu setting.

CH(annel) o/p Button

Press to scan through the TV/VCR’s available channels.

MENU Button

Press to display the main menu. Press to remove menus.

PLAY/▲ Button

Press to play a tape. Details are on page nine. Press to select a menu

item or to change menu information.

SLEEP/WAKE UP Button

Press to set the Sleep Timer. Details are on page 37. Press to set the Wake Up Timer. Details

are on page 36.

SPEED Button

Press to select the recording tape speed (SP or SLP). Details are on page 10.

Remote Control 11

VOL(ume) o/p Button

Press to adjust the sound level. Pressing VOL(ume) o/p when the sound is muted will restore the sound.

POWER Button

Press to turn on or off the TV/VCR.

REW/{ (rewind) Button

Press to rewind the tape. Details are on page 28. Press to change a menu

setting.

RECORD Button

Press to start a recording. Details are on page 10.

Number Buttons

Use to select TV channels. Details are on page 14.

TIME SEARCH Button

Press to activate a Time Search.

Details are on page 31.

RESET Button

Press to reset the tape counter to 0:00:00. Details are on page 31.

DISPLAY Button

Press to display the tape status, channel number, and time on the TV. Details are on page 21.

STOP/▼ Button

Press to stop the tape. Press to select a menu item or to change menu information.

PAUSE/STILL Button

Press to pause recording. Press again to resume recording. Details

are on page 10.

During tape playback, press to freeze the picture (still).

Details are on page 28.

MUTE Button

Press to eliminate the TV/VCR’s sound. Press again to return to the previous volume level.

ALT. CH (Alternate Channel) Button

Press to return to the TV channel you were viewing previously.

12 Front Panel

VIDEO AUDIO

POWER VOLUME CHANNEL STOP/EJECT REW PLAY F.FWD REC/OTR

EARPHONE

Cassette Compartment

Insert a videotape here.

Remote Sensor

Receives a signal from your remote so you can operate the TV/VCR from a distance.

CHANNEL ▲/▼ Buttons

Press to select a TV channel. To access the TV/VCR’s menu, press

CHANNEL ▲ while in AUX mode. Press

again to remove the main menu and go to your lowest TV channel. (Tape play must be stopped.) Some menus can be removed only by pressing MENU on the remote. Press to adjust the tracking. Details are on

page 38.

POWER Button

Press to turn the TV/VCR on or off. Turn off the TV/VCR for a timer recording.

VOLUME o/p Buttons

Press to adjust the sound level. Pressing a VOLUME button while the sound is muted will restore the sound.

STOP/EJECT Button

Press once to stop the tape.When playback is stopped, press to eject the tape. Press to select an item in the menu.

REW (rewind) Button

Press to rewind the tape. Press to change a setting of a menu item.

PLAY Button

Press to play a tape. Details are on page nine. Press to select a menu item.

F.FWD (Fast Forward) Button

Press to fast forward the tape. Press to change a setting of a menu item or to go to the next menu.

REC/OTR (record/one-touch recording) Button

Press once to start a recording. Details are on page 10. Press repeatedly to start a One-Touch Recording (an immediate timed recording, 30 minutes to eight hours long) of the current TV channel. Details are on page 27.

REC/OTR light

This light flashes during a recording and when recording is paused. It stays on when the TV/VCR is off for a timer recording.

EARPHONE Jack

Connect earphones (not supplied) here for personal listening.

AUDIO In Jack

Connect this jack to the audio out jack of a Camcorder, VCR, DVD Player, etc. Details are on page 26.

VIDEO In Jack

Connect this jack to the video out jack of a Camcorder,VCR, DVD Player, etc. Details

are on page 26.

Rear Panel 13

ANT(enna) Jack

Connect your antenna or Cable TV signal here. Details

are on page six.

Antenna Hole

Connect the stem of an indoor rod antenna here.

Details are on page six.

AC Power Cord

Connect to a standard AC outlet to supply power to the TV/VCR.

ANT.

14 Setting TV Channels

• The TV/VCR distinguishes between standard TV channels and Cable TV channels.

• If you activate AUTO CH PROGRAMMING when no antenna or Cable TV signal is connected to the TV/VCR’s ANT(enna) jack, NO TV SIGNALS will appear on the display after completion of channel scanning.

• To select Cable TV channels higher than 99, press the +100 button, then press the Number buttons for the last two digits. For example, to select channel 125, press +100, 2, 5. Precede singledigit channel numbers with a zero (for example, 01 ... 09).

• The TV/VCR cannot control or change the channels of a Cable Box or Satellite Receiver.

Helpful Hints

Press PLAY/▲ or STOP/▼ to select AUTO CH PROGRAMMING. Then, press F.FWD/B.

The TV/VCR scans and memorizes available channels. When scanning is complete, the TV/VCR will go to the lowest available channel. Press CH o/p to select memorized channels. Use the Number buttons to select non-memorized channels.

TIME SEARCH

MUTE

RECORD

SPEED RESET

8 97

5 64

2 31

PAUSE/STILL

100

STOP

F.FWD

PLAY

REW

VOL.

DISPLAY

POWER

SLEEP/WAKE UP

CH.

T.C

– M E N U –

TIMER PROGRAMMING

PICTURE CONTROL SETTING CLOCK

B CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH

– CHANNEL SET UP –

ADD / DELETE CH (CATV)

B AUTO CH PROGRAMMING

1-2

The TV/VCR can memorize available channels for your area. You can reset channels at the TV/VCR by following the steps below. If you are using a Cable Box or Satellite Receiver, you do not need to set channels at the TV/VCR. Set the TV/VCR to the output channel of the Cable Box or Satellite Receiver (channel 03 or 04).Then select the channel to be viewed on the Cable Box or Satellite Receiver.

Press MENU. Press PLAY/▲ or STOP/▼ to select CHANNEL SET UP. Press F.FWD/

+ 30 hidden pages