Magnavox MBP1100 User Manual
Owner’s Manual
MBP1100/F7
Blu-ray Disc Player
Read your Owner’s Manual rst for
quick tips that make using your
Magnavox product more enjoyable.
If you have read assistance,
you may access our online help at
http://www.funai-corp.com
or call
1-800-605-8610
while with your product
(and Model / Serial number)
INTRODUCTION CONNECTIONS PLAYBACK FUNCTION SETUP OTHERS
© 2009 Funai Electric Co., Ltd.
Safety Instructions
INTRODUCTION
The model and serial numbers of this unit may be found on the cabinet.
You should record and retain those numbers for future reference.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
Model No.:
Serial No.:
APPARATUS TO RAIN OR MOISTURE.
APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS
FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The important note is located on the rear or bottom of the cabinet.
The lightning ash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage”within the
product’s enclosure that may be of sucient magnitude
to constitute a risk of elec tric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not t into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specied by the
manufacturer.
12. Use only with the cart, stand, tripod,
bracket, or table specied by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualied service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
FCC WARNING
This equipment may generate or use radio frequency energy. Changes or modications to this equipment may
cause harmful interference unless the modications are expressly approved in the manual. The user could lose the
authority to operate this equipment if an unauthorized change or modication is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment o and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Disconnect the mains plug to shut o when nd trouble or not in use. The mains plug shall remain readily operable.
2EN
INTRODUCTION
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
WARNING:
LASER SAFETY
This apparatus employs a laser. Only a qualied service person should remove the cover or attempt to service this
apparatus, due to possible eye injury.
CAUTION: Use of controls or adjustments or performance of procedures other than those specied herein may
CAUTION: Visible and invisible laser radiation when open and interlocks defeated. Do not stare into beam.
LOCATION: Inside, near the deck mechanism.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates
copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this
copyright protection technology must be authorized by Macrovision, and is intended for home and other limited
viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing
or climbing on it. A falling unit can cause serious injury or even death.
To Avoid the Hazards of Electrical Shock and Fire
Do not handle the AC power cord with wet hands.
•
•
Do not pull on the AC power cord when disconnecting it from an AC outlet. Grasp it by the plug.
Do not put your ngers or objects into the unit.
•
Batteries (Battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, re, or the like.
result in hazardous radiation exposure.
INTRODUCTION CONNECTIONS PLAYBACK FUNCTION SETUP OTHERS
Location and Handling
•
Do not install the unit in direct sunlight, near strong magnetic elds, or in a place subject to dust or strong vibration.
•
Avoid a place with drastic temperature changes.
•
Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.
Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is
placed too close to them. In this case, please ensure enough space between the external devices and the unit.
Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.
•
•
Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.
Dew Condensation Warning
•
Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few
hours until its inside gets dry.
- The unit is moved from a cold place to a warm place.
- Under conditions of high humidity.
- After heating a cold room.
Note about Recycling
This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in
•
accordance with your local recycling regulations.
•
Batteries should never be thrown away or incinerated but disposed of in accordance with your local
regulations concerning chemical wastes.
Notice for Progressive Scan Output
•
Consumers should note that not all high denition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of picture problems with 525(480) progressive scan output,
it is recommended that the user switch the connection to the ‘standard denition’ output. If there are questions
regarding your TV set compatibility with this 525p(480p) BD/DVD player, please contact our customer service center.
3EN
Contents
INTRODUCTION
INTRODUCTION
Safety Instructions ........................................................................2
Supplied Accessories ...................................................................5
Trademark Information...............................................................5
Features ............................................................................................6
Symbols Used in this Manual....................................................6
Front Panel.......................................................................................7
Rear Panel.........................................................................................7
Remote Control..............................................................................8
CONNECTIONS
Connection to the TV................................................................ 10
Connection to an Audio System ........................................... 12
Finding the Video Channel on Your TV.............................. 13
PLAYBACK
Information on Playback.......................................................... 14
How to Insert a Disc................................................................... 17
Reading the SD Memory Card ...............................................17
Selecting the Media Mode...................................................... 18
Playing Back (BD / DVD)...........................................................19
Playing Back (Audio CD / JPEG Files)...................................20
Kodak Picture CD........................................................................21
Fast Forward / Fast Reverse .................................................... 22
Slow Forward Playback ............................................................22
Step by Step Playback ..............................................................22
Repeat Playback.......................................................................... 22
Program Playback ......................................................................23
Random Playback....................................................................... 24
Rapid Playback ............................................................................24
Adjusting the Picture ................................................................24
Virtual Surround.......................................................................... 25
PIP (BONUSVIEW) Setting ........................................................ 25
Camera Angle ..............................................................................25
Search............................................................................................. 26
Switching Subtitles.................................................................... 27
Switching Audio Soundtrack .................................................27
Setting the BD Audio Mode.................................................... 28
FUNCTION SETUP
Using the Setup Menu ..............................................................29
Quick..........................................................................................29
Custom .....................................................................................30
Language............................................................................. 31
Video ..................................................................................... 32
Audio..................................................................................... 34
Parental ................................................................................ 39
Others.................................................................................... 40
Initialize ....................................................................................44
OTHERS
Troubleshooting..........................................................................45
Glossary ..........................................................................................46
Language Code List....................................................................47
Maintenance.................................................................................49
LIMITED WARRANTY .................................................back cover
4EN
Supplied Accessories
INTRODUCTION
INTRODUCTION CONNECTIONS PLAYBACK FUNCTION SETUP OTHERS
Owner’s Manual
remote control × 1
(NB950UD/NB900UD)
AAA (1.5V) battery × 2
RCA audio / video cables
(WPZ0102TM018 /
WPZ0102LTE01)
Trademark Information
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under license under U.S. Patent #’s:
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 &
other U.S. and worldwide patents issued & pending. DTS is
a registered trademark and the DTS logos, Symbol, DTS-HD
and DTS-HD Advanced Digital Out are trademarks of DTS,
Inc. © 1996-2008 DTS, Inc. All Rights Reserved.
owner’s manual (EN/ES/FR)
(1VMN28573 /1VMN28574 /
1VMN28575)
“BONUSVIEW” is trademark of Blu-ray Disc Association.
Java and all other Java trademarks and logos are
trademarks or registered trademarks of Sun Microsystems,
Inc. in the United States and / or other countries.
Products that have earned ENERGY STAR® are designed to
protect the environment through superior energy
efficiency.
quick start guide (EN/ES/FR)
(1VMN28576 / 1VMN28577 /
1VMN28578)
“Blu-ray Disc” and are trademarks.
is a trademark of DVD Format/Logo Licensing
Corporation.
© 2009 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed,
downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent
of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly
prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the content herein
without the obligation to notify any person or organization of such changes.
with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the
express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective
owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or
right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is
strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.
is trademark of Eastman Kodak Company.
5EN
INTRODUCTION
Features
Full high-definition video playback
Watch movies in the highest picture quality available for your
HDTV. This unit offers full high-definition video playback up to
1080p resolution for an amazing viewing experience. A highly
detailed picture and increased sharpness delivers a more trueto-life picture.
Upconvert DVD for enhanced picture quality
Your current DVD will look even better than before thanks to
video upconversion. Upconversion will increase the
resolution of standard definition DVD to high definition up to
1080p over an HDMI connection. The picture will be less
jagged and more realistic for a near high-definition
experience.
Enjoy your content on different kinds of media
Full backwards compatibility with DVD, CD and SD card
ensures that you can continue to enjoy your current audiovideo collection. Additionally, you can view JPEG images.
Listen to the rich multi-channel surround sound
Multi-channel surround sound, which recognizes real-to-life
sound and makes you feel like you are really there.
PIP (BONUSVIEW)
Some BD-videos have the PIP function which enables you to
display the secondary video in the primary video. You can call
up the secondary video by pressing [MODE] whenever the
scene contains the secondary video.
Pop-up menu
Some BD-video have pop-up menu which is a navigation
menu that can be called up and be operated on the TV screen
without interrupting the playback. You can call up the pop-up
menu by pressing [POP MENU / MENU]. Contents in the
pop-up menu vary depending on the disc.
Rapid playback
Playback in slightly faster speed while keeping the sound
output.
Rapid playback is available only on discs recorded in the
Dolby Digital format.
Playing back the contents in SD Memory Card
You can play back JPEGs stored in an SD Memory Card.
You can store picture-in-picture commentary, subtitles or
other extras for BD-ROM Profile 1 ver.1.1 files in an SD Memory
Card and play back with the BD-video.
Easy and simple connection to your HDTV via
HDMI
Connect this unit to your HDTV with one single HDMI (HighDefinition Multimedia Interface) cable. It is recommended to
use a High Speed HDMI Cable for better compatibility. The
high definition video output signal will be transferred to your
HDTV without conversion to analog signals, so you will get
excellent picture and sound quality, completely free from
noise.
Thanks to other multiple outputs, you can also easily connect
to your home theater system or amplifier.
HDMI Deep Color
Deep Color reduces the posterization effect of the playback
image. Refer to “HDMI Deep Color” in “FUNCTION SETUP” on
page 32.
HDMI CEC (Consumer Electronics Control)
This unit supports HDMI CEC, which allows integrated system
control over HDMI and is part of the HDMI standard.
This function may not work properly on some devices.
HDMI 1080p24 output (BD only)
This unit is equipped with a feature which can provide the
smooth movement in the playback of film originated material
with the frame rate of 24 frames per second with progressive
scan. (Available only when the TV is connected by an HDMI
cable and compatible with 1080p24 frame input.)
Refer to “HDMI Video Resolution” in “FUNCTION SETUP” on
page 32.
Copyright protection system
To play back the digital video images of a BD / DVD via an
HDMI connection, it is necessary that both the unit and the
TV (or an AV amplifier) support a copyright protection
system called HDCP (high-bandwidth digital content
protection system). HDCP is copy protection technology
that comprises data encryption and authentication of the
connected AV device. This unit supports HDCP. Please read
the operating instructions of your TV (or AV amplifier) for
more information.
Symbols Used in this Manual
To specify for which media type each function is, we put the
following symbols at the beginning of each item to operate.
Symbol Description
Description refers to BD-video and BD-RE
(ver.2.1) / BD-R (ver.1.1/1.2/1.3) recorded in
BDMV format
Description refers to DVD-video
Description refers to audio CD / DTS-CD
Description refers to BD-RE/-R, DVD, CD-RW/-R
and SD Memory Card with JPEG files
If you do not find any of the symbols listed above under the
function heading, the operation is applicable to all media.
6EN
Front Panel
INTRODUCTION
INTRODUCTION CONNECTIONS PLAYBACK FUNCTION SETUP OTHERS
1 3 4 5 6* 72*
(*) The unit can also be turned on by pressing these buttons.
1. Disc tray
• Place a disc when opening the disc tray.
2. A OPEN/CLOSE button*
• Press to open or close the disc tray.
3. DISC IN indicator
• This indicator lights up in blue when a disc is in this
unit.
4. Infrared sensor window
• Receive signals from your remote control so that you
can control the unit from a distance.
5. C STOP button
• Press to stop playback.
6. B PLAY button*
• Press to start or resume playback.
OPEN/
CLOSE
DISC IN
7. PLAY indicator
• This indicator lights up in green when discs or SD
card play back.
8. STANDBY-ON indicator
• This indicator lights up in red when the power is in
the standby mode.
9. Q STANDBY-ON button
• Press to turn on the unit, or to turn the unit into the
standby mode. (To completely turn off the unit, you
must unplug the AC power cord.)
• Press and hold for 10 seconds to shut down the unit.
10. SD card slot
• Insert an SD Memory Card and play back the
contents in it.
STOP PLAY
98
STANDBY-ON
SD card
10
Rear Panel
HDMIOUT
AUDIO
3
OUT
1
2
COAXIAL
DIGITAL OUT
PCM/BITSTREAM
1. AC power cord
• Connect to a standard AC outlet to supply power to
this unit.
• Unplug this cord from the AC outlet to completely
turn off the unit.
2. HDMI OUT jack
• Use to connect a TV with an HDMI compatible port
with an HDMI cable.
3. AUDIO OUT jacks
• Use to connect a TV, an AV receiver / amplifier or
other device with an RCA audio cable.
4. COMPONENT VIDEO OUT jacks
• Use to connect a TV with component video inputs
with an RCA component video cable.
4
PR/C
R
Y
L
PB/C
B
R
COMPONENT
VIDEO
VIDEO OUT
OUT
65
5. DIGITAL OUT (COAXIAL) jack
• Use to connect an AV receiver / amplifier, Dolby
Digital / DTS decoder or other device with a digital
audio coaxial input jack with a digital audio RCA
cable.
6. VIDEO OUT jack
• Use to connect a TV, an AV receiver or other device
with an RCA video cable.
Note
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
• This unit does not have the RF modulator.
7EN
INTRODUCTION
Remote Control
1
2
3
4
5
6
7*
8
10
11
12
(*) The unit can also be turned on by pressing these buttons.
1. STANDBY-ON Q button
• Press to turn on the unit, or to turn the unit into the
standby mode. (To completely turn off the unit, you
must unplug the AC power cord.)
2. RED / GREEN / BLUE / YELLOW button
• Press to select items on some BD menus.
• When file list / thumbnail list is shown, press to
switch between pages.
3. TOP MENU button
• Press to display the top menu.
4. K / L / s / B buttons
• Press to select items or settings.
5. SETUP button
• Press to display the setup menu.
6. E (reverse) button
• During playback, press to fast reverse the playback.
7. B (play) button*
• Press to start playback or resume playback.
8. H (skip) button
• During playback, press once to return to the
beginning of the current title, chapter or track.
• During playback, press twice to return to the
previous title, chapter or track.
• During the JPEG playback, press to return to the
previous file.
9. C (stop) button
• Press to stop playback.
10. Number buttons
• Press to enter the title, chapter, track or file number.
• Press to enter values in the input field.
11. SEARCH button
• Press to display the search menu.
13*
14
15
16
17
18
199
20
21
22
23
24
25
12. REPEAT button
• Press to toggle between various repeat modes.
13. OPEN/CLOSE A button*
• Press to open or close the disc tray.
14. POP MENU / MENU button
• Press to display the pop-up menu / disc menu.
15. OK button
• Press to confirm or select menu items.
16. RETURN button
• Press to return to the previously displayed menu
screen.
17. D (forward) button
• During playback, press to fast forward the playback.
• In pause mode, press to slow forward the playback.
18. G (skip) button
• During playback, press to skip to the next title,
chapter, track or file.
19. F (pause) button
• Press to pause playback.
• When playback is in pause mode, press repeatedly
to forward the playback step by step.
20. DISPLAY button
• Press to display the on-screen display menu.
21. ANGLE button
• Press to access various camera angles on the disc.
• Press to rotate the JPEG files clockwise by 90 degrees.
22. SUBTITLE button
• Press to display the subtitle menu.
23. AUDIO button
• Press to display the audio menu.
24. MODE button
• During BD or DVD playback, press to display the
setting for the rapid playback and the picture
adjustment.
• During BD, DVD and CD playback, press to display
the setting for the virtual surround.
• During BD playback, press to turn the picture-inpicture feature on or off (only applicable to BD-video
which supports the PIP function).
• During the JPEG playback, press to display menus
for changing the visual effect for switching the
image or changing the size of the image.
• In stop mode with BD inserted, press to display a
menu for setting the BD audio mode.
• In stop mode with audio CD or JPEG files inserted, press
to display menus for program and random playback.
25. CLEAR button
• Press to clear the information once entered or to
cancel the programming for audio CD, etc.
8EN
INTRODUCTION
Installing the Batteries in the Remote Control
Install AAA (1.5V) battery × 2 matching the polarity
indicated inside battery compartment of the remote
control.
1) Open the cover.
2
1
2) Insert batteries.
Using a Remote Control
Keep in mind the following when using the remote
control:
• Make sure that there are no obstacles between the
remote control and the infrared sensor window on the
unit.
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the infrared
sensor window of the unit.
• Remote control for different devices can interfere with
each other. Avoid using remote control for other device
located close to the unit.
• Replace the batteries when you notice a fall off in the
operating range of the remote control.
• The maximum operable ranges from the unit are as
follows.
- Line of sight: approx. 23 feet (7 m)
-
Either side of the center:
- Above: approx. 16 feet (5 m) within 15°
- Below: approx. 10 feet (3 m) within 30°
16 feet
(5 m)
approx. 16 feet (5 m) within 30°
OPEN/
CLOSE
DISC IN
23 feet
(7 m)
30˚30˚
16 feet
(5 m)
STOP PLAY
STANDBY-ON
SD card
INTRODUCTION CONNECTIONS PLAYBACK FUNCTION SETUP OTHERS
Line of sight:
Either side of t
Above:
Below:
Make sure to match + and - on the batteries to the
marks indicated in the battery compartment.
3) Close the cover.
1
2
Note
Incorrect use of batteries can result in hazards such
as leakage and bursting. Please observe the
following:
• Do not mix new and old batteries together.
• Do not use different kinds of batteries together.
Although they may look similar, different batteries
may have different voltages.
• Make sure that the + and - ends of each battery
match the indications in the battery compartment.
• Remove batteries from battery compartment that
are not going to be used for a month or more.
• When disposing of used batteries, please comply
with governmental regulations or environmental
public rules that apply in your country or area. (Refer
to page 3.)
• Do not recharge, short-circuit, heat, burn or
disassemble batteries.
9EN
Connection to the TV
Choose the appropriate connection, then proceed to the corresponding
1
instruction (A, B or C) on the next page.
CONNECTIONS
Best
No analog audio connection required.
No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.
High Speed HDMI Cable (also known as HDMI category 2 cable) is recommended for the better compatibility.
Better
(Supports up to 1080i / 1080p, 1080p24 resolution.)
Video
Audio
Video
HDMI cable
(Supports up to 1080i resolution.)
RCA component video cable
HDMI IN
+
COMPONENT
VIDEO IN
Y
PB/CB
PR/CR
L
Your TV
High
Definition
TV
Your TV
High
Definition
TV
Go To
Go To
A
B
Audio
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
Basic
Video
+
Audio
• Connect this unit directly to the TV. If the RCA audio / video cables are connected to a VCR, pictures may be distorted
due to the copy right protection system.
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x1
• RCA video cable x1
RCA audio cable
(Supports only 480i resolution.)
RCA video cable
RCA audio cable
AUDIO IN
R
VIDEO IN
L
AUDIO IN
R
Your TV
Standard
Definition
TV
Go To
C
10 EN
2
CONNECTIONS
INTRODUCTION CONNECTIONS PLAYBACK FUNCTION SETUP OTHERS
Connect the cables by following the descriptions below.
HDMI Video / Audio Connection
02#2
9
A
#/!8)!,
$)')4!,/54
0#-")4342%!-
,
($-)/54
0"#"
2
#/-0/.%.4
!5$)/
6)$%/
6)$%//54
/54
/54
HDMI cable
Your TV
HDMI IN
Note
• Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the
connector are matched.
• When using HDCP-incompatible TV, the image will not be viewed properly.
Not displayed the picture on the TV screen ...
The indicators blink under the following conditions.
• When the connected device does not support HDCP.
• When the connected device is recognized as an HDCP incompatible by HDMI SRM.
• When the connected device supports HDCP but cannot be recognized as an HDCP compatible for some reason.
The indicators blink as follows for 30 seconds.
DISC IN
STOP PLAY
STANDBY-ON
Component Video + Standard Audio Connection
02#2
9
,
($-)/54
0"#"
#/!8)!,
B
$)')4!,/54
0#-")4342%!-
2
#/-0/.%.4
!5$)/
6)$%/
6)$%//54
/54
/54
Your TV
PR/C
R
Y
L
PB/C
B
R
AUDIO
OUT
COMPONENT
VIDEO OUT
RCA audio cable
Standard Video + Standard Audio Connection
C
#/!8)!,
$)')4!,/54
0#-")4342%!-
02#2
9
,
($-)/54
0"#"
2
#/-0/.%.4
!5$)/
6)$%/
6)$%//54
/54
/54
L
RCA video cable
R
AUDIO
VIDEO
OUT
OUT
RCA audio cable
RCA
component
video cable
COMPONENT
VIDEO IN
Y
PR/CR
PB/CB
VIDEO IN
L
AUDIO IN
R
Your TV
L
AUDIO IN
R
11EN
CONNECTIONS
Connection to an Audio System
• When you change the connections, all devices should be turned off.
• Refer to the manual accompanying external devices for more information.
2-Channel Analog Audio Connection Digital Audio Connection
stereo system
Analog audio input jacks
PR/C
Y
L
HDMIOUT
COAXIAL
DIGITAL OUT
PCM/BITSTREAM
PB/C
R
COMPONENT
AUDIO
VIDEO
VIDEO OUT
OUT
OUT
AUDIO OUT
HDMI Audio Connection
audio
AUDIO IN
LR
audio
digital audio coaxial
input jack
RCA audio cable
L
R
B
this unit
R
AUDI O
OUT
AV receiver / amplifier with an HDMI input jack
AV receiver / amplifier
DIGITAL AUDIO INPUT
COAXIAL
digital audio
RCA cable
PR/C
R
Y
L
HDMIOUT
PB/C
R
AUDIO
VIDEO
OUT
OUT
B
COAXIAL
COMPONENT
VIDEO OUT
DIGITAL OUT
PCM/ BITSTREAM
COAXIAL
DIGITAL OUT
PCM/BITSTREAM
DIGITAL OUT (COAXIAL)
To set up “Digital Out”, refer to page 36.
this unit
HDMI IN
HDMI cable
To set up “HDMI Audio Out”, refer to pages 35 and 34.
Supplied cables used in this connections are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
COAXIAL
DIGITAL OUT
PCM/BITSTREAM
PR/C
R
Y
L
HDMIOUT
PB/C
B
R
COMPONENT
AUDIO
VIDEO
VIDEO OUT
OUT
OUT
12 EN
CONNECTIONS
After you have completed all the connections, you must find the correct video channel (external input channel) on your TV.
Finding the Video Channel on Your TV
After you have made all the necessary connections, press [STANDBY-ON Q] to turn
1
on the unit.
Turn on your TV.
2
Press the button on the TV’s remote control that accesses the external input
3
channel. It may be labeled “SOURCE”, “AV” or “SELECT” (refer to your TV’s user
manual).
INTRODUCTION CONNECTIONS PLAYBACK FUNCTION SETUP OTHERS
Note
• If the TV is connected by an HDMI cable, it may take a while for the opening picture to come up.
13EN
PLAYBACK
Information on Playback
Before you start playing back a disc, read the following information.
Playable Discs and Files
This unit is compatible to play back the following discs / files.
To play back a disc / file, make sure that it meets the
requirements for region codes and color systems as
described below. You can play back discs that have the
following logos.
Other disc types are not guaranteed to play back.
Playable discs Logos
Blu-ray Disc
- BD-video (single / dual layer)
- BD-RE ver. 2.1 (single / dual layer)
(Recorded in BDMV format)
- BD-R ver. 1.1 / 1.2 / 1.3 (single / dual
layer) (Recorded in BDMV format)
(Unclosed discs may not be played
back.)
DVD-video
DVD-RW
DVD-R
CD-DA (audio CD)
CD-RW
CD-R
Readable cards Playable files / data
SD Memory Card (8 MB - 2 GB)
SDHC Memory Card (4 GB - 8 GB)
miniSD Card (8 MB - 2 GB)
microSD Card (8 MB - 2 GB)
JPEG, picture-in-picture
commentary, subtitles or
other extras for BD-ROM
Profile 1 ver.1.1
Note for SD Memory Cards
• This unit supports SD Memory Card with FAT12/
FAT16 file system, and SDHC Memory Card with
FAT32 file system.
• This unit does not support NTFS file system.
• This unit may not read the SD Memory Cards
formatted on a computer. If that is the case, please
reformat the SD Memory Cards in this unit and try
again.
• This unit does not support miniSDHC and microSDHC
Memory Card.
• For miniSD Card and microSD Card, the adapter is
necessary.
miniSD Card
adapter
miniSD Card
• Portions of this product are protected under
copyright law and are provided under license by
ARIS / SOLANA / 4C.
• Please keep the SD Memory Cards in their cases when
you are not using them.
• Do not try to open or modify the card.
• Do not touch the terminal surface with your fingers or
any metals.
• Do not attach additional labels or stickers to cards.
• Do not remove the label of the SD Memory Cards.
• This unit recognizes up to 8 characters of file name in
the SD Memory Card. Characters after 8th will not be
displayed.
microSD Card
adapter
microSD
Card
Kodak Picture CD
Unplayable Discs and Files
The following discs will not be played back in this unit.
DTS-CD
-
• CD-ROM • CD-I (compact disc-interactive)
• DVD-RAM • VSD (video single disc)
• DVD-audio • Video CD
Playable files Media
JPEG
BD-RE/-R, DVD, CD-RW/-R,
SD Memory Card (including SDHC),
miniSD Card, microSD Card
• HD DVD • SVCD
• Unfinalized disc
• BD-RE (ver.1.0)
• BD-RE (ver.2.1) (Recorded in BDAV format)
• BD-R (ver.1.1 / 1.2 / 1.3) (Recorded in BDAV format)
• DVD / CD / SD Memory Card contains MP3, Windows
Media™ Audio and DivX® files.
• DVD-RW/-R recorded in non compatible recording
format.
• Super Audio CD - Only the sound on the CD layer can be
heard. The sound on the high-density Super Audio CD
layer cannot be heard.
• Playability of dual discs are not guaranteed.
14 EN
PLAYBACK
INTRODUCTION CONNECTIONS PLAYBACK FUNCTION SETUP OTHERS
Color Systems
BD-video and DVD-video are recorded in different color
systems throughout the world. The most common color
system is NTSC (which is used primarily in the United
States and Canada).
This unit employs NTSC color system, so the disc you play
back must be recorded in the NTSC system. You cannot
play back the disc recorded in other color systems.
Region Codes
This unit has been designed to play back
BD-video with region “A” and DVD-video
with region “1” or “ALL”. You cannot play
back BD-video or DVD-video that are
labeled for other regions. Look for the
symbols on the right on your BD-video or
DVD-video.
If these region symbols do not appear on
your BD-video or DVD-video, you cannot
play back the disc in this unit. The letter or
number inside the globe refers to region
of the world. A BD-video or DVD-video
labeled for a specific region can only be
played back in the unit with the same
region code.
BD-video
DVD-video
Structure of Disc / SD Memory Card Contents
The contents of BD / DVD are generally divided into titles.
Titles may be further subdivided into chapters.
BD / DVD
title 1 title 2
chapter 1
chapter 2 chapter 2chapter 1 chapter 3
On-Screen Display
You can check information about the current disc by
pressing [DISPLAY].
To call the on-screen display menu, press [DISPLAY]
during playback. Every time you press [DISPLAY], the
information changes. Depending on the media, available
information varies.
off A Title / Chapter information
A Title information (elapsed time)
A Title information (remaining time)
A Audio format information A off
off A Chapter information (elapsed time)
A Chapter information (remaining time)
A Title information (elapsed time)
A Title information (remaining time)
A Audio format information A off
Track information (elapsed time)
A Track information (remaining time)
A Disc information* (elapsed time)
A Disc information* (remaining time)
A Track information (elapsed time)
(* not available during program / random playback)
off A File information A File name information A off
audio CD are divided into tracks.
track 1 track 2 track 3 track 4 track 5
Data discs or SD Memory Cards containing JPEG are
divided into folders, and the folders are subdivided into
files.
folder (group) 1
file 1
audio CD
JPEG
folder (group) 2
file 2 file 3 file 4 file 5
15EN
PLAYBACK
S Chapter information
<Title / Chapter information for BD>
1 32
1 1/10
4 5
T
<Chapter information for DVD>
1
2
3
2 6
3 / 5 0 : 01 : 02
Current title number
Current chapter number / Total number of chapters
Current repeat setting (Only when repeat setting is
active)
(C: Chapter repeat, T: Title repeat)
4
Indicates that the multi camera angle images are
available on the scene
5
Current playback status
6
Elapsed time / Remaining time of the current chapter
S Title information
1 2
3 / 5 0 : 01 : 02
1
Current title number / Total number of titles
2
Elapsed time / Remaining time of the current title
S Track / File information
1 3 42
SD1 / 14 0 : 00: 51
G
1
Current track (file) number / Total number of track
(file)
2
Elapsed time / Remaining time of the current track
(except for JPEG files)
3
Indication of SD Memory Card playback
4
Current repeat setting
(Only when repeat setting is active)
(T: Track repeat, G: Group repeat,
A: All repeat)
S Disc information
1 2
1 / 14 0 : 00: 51
1
Current track number / Total number of tracks
2
Elapsed time / Remaining time of the current disc
T
S File name information
1
File_name_001
1
Media icon and file name
: JPEG file
S Audio format information
1
Dolby Digital
1
Audio format
16 EN
Loading...