How it Works
Magnavox
Loading...
CC19B1MG
Owner's Manual
60 pgs862.09 Kb0
Specifications
2 pgs221.41 Kb0
User Manual
60 pgs710.61 Kb0

Magnavox CC19B1MG User Manual

Download
TVCR
Color TV with built-in VCR
Color TV with built-in VCR
Owner’s Manual
Owner’s Manual
CC13B1MG CC19B1MG
Once your purchase is registered, you’re eligible to receive all the privileges of owning this prod­uct. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits.
MAC5097
Return your Warranty Registration Card today to
ensure you receive all the
benefits
you’re entitled to.
Warranty Verification
Registering your product within 10 days confirms your right to maximum protection under the terms and conditions of your warranty.
Owner Confirmation
Your completed Warranty Registration Card serves as verification of ownership in the event of product theft or loss.
Model Registration
Returning your Warranty Registration Card right away guarantees you’ll receive all the information and special offers which you qualify for as the owner of your model.
Congratulations on your purchase, and welcome to the “family!”
Dear Magnavox product owner:
Thank you for your confidence in this product. You’ve selected one of the best-built, best-backed products available today. And we’ll do everything in our power to keep you happy with your purchase for many years to come. As a member of the Magnavox “family,” you’re entitled to protection by one of the most comprehensive warranties and outstanding ser­vice networks in the industry. What’s more, your purchase guarantees you’ll receive all the infor­mation and special offers for which you qualify, plus easy access to accessories from our convenient home shopping network. And most importantly, you can count on our uncompromising com­mitment to your total satisfaction. All of this is our way of saying welcome - and thanks for investing in a Magnavox product.
P.S. Remember, to get the most from your product,
you must return your Warranty Registration Card within 10 days. So please mail it to us right now!
R
E
G
I
S
T
R
A
T
I
O
N
N
E
E
D
E
D
W
I
T
H
I
N
1
0
D
A
Y
S
Hurry!
Know these
safetysymbols
This “bolt of lightning”
indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering.
The “exclamation point” calls attention to features
for which you should read the enclosed literature closely to prevent operating and maintenance problems.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
CAUTION: To prevent elec­tric shock, match wide blade of plug to wide slot, fully insert.
ATTENTION: Pour éviter les choc électriques, intro­duire la lame la plus large de la fiche dans la borne correspon­dante de la prise et pousser jusqu’au fond.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
t
s
For Customer Use
Below, enter your product’s model number and serial number, which are located on the rear of the cabinet. Keep this information for future reference.
Model No. ______________________________________ Serial No. ____________________________
Introduction 3
• Before doing anything else, record the TV/VCR’s model and serial num­bers in the spaces provided on page two. These numbers will help us assist you if you ever call for help.
• Your new product, its packaging, and this manual contain materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount that needs to be properly disposed. Your product uses batteries that should not be thrown away when depleted but should be disposed of as small chemical waste. Please find out about the local regu­lations on disposal of your old prod­uct, batteries, manual, and packag­ing whenever you replace existing equipment.
Helpful Hints
Features
• A-B Repeat Play
• Automatic Channel Setup
• Automatic Head Cleaner
• Automatic Operation Features
• Automatic Tracking Adjustment
• Blue Background
• Closed Caption
• Daylight-Savings Time
• High Quality (HQ) System
• On-screen displays in English or Spanish
• On-screen Menu Programming, accessible with remote control or front panel buttons
• One-Touch Recording
• Real-Time Counter
• Remote Control
• Repeat Play
• S-VHS Quasi Play Back (SQPB)
• ShowGuard™ - Indefinite Timer Recording memory
• Sleep Timer
• SmartClock
TM
• SmartLock
TM
• Special Effects Playback: Forward and Reverse Searching; Still
• Timer Recording
• Wake Up Timer
Safety Precautions
Warning: To prevent fire or shock hazard, do not expose this equipment to rain or moisture. Federal Communications Commission (FCC) Warning: Any unau­thorized changes or modifications to this equipment void the user’s authority to operate it. This TV/VCR, equipped with a High Quality (HQ) system, is com­patible with existing Video Home System (VHS) equipment.
Philips Consumer Electronics recommends that you use only video cassette tapes that are labeled with the mark. The use of other tapes may result in poor picture quality and excessive deposits on the video heads, which may not be covered by the warranty if damage occurs.
Note to the Cable TV System Installer: This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper grounding – in particular, specifying that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as possible.
Declaration of Conformity
Model Number: CC13B1MG/CC19B1MG Trade Name: Magnavox Responsible Party: Philips Consumer Electronics
P.O. Box 14810 Knoxville, TN 37914-1810 (865) 521-4316
As an ENERGY STAR®Partner, Philips Consumer Electronics has determined that this product meets the ENERGY STAR®guidelines for energy efficiency. ENERGY
STAR®is a U.S. registered mark. Using products with the ENERGY STAR®label can save energy. Saving energy reduces air pollution and lowers utility bills.
SmartClockTM, SmartLockTM, and ShowGuardTMare trademarks of Philips Consumer Electronics. Copyright 2000 Philips Consumer Electronics. All rights reserved.
Welcome to your TV/VCR owner’s manual.
This manual describes two models: CC13B1MG and CC19B1MG. Although the models may have a differ­ent appearance, both models operate exactly the same. The features described in this manual apply to both models unless otherwise specified. The CC13B1MG is illustrated in this manual, but the CC19B1MG has a similar appearance. This manual has seven sections: Setting Up Your TV/VCR; Description of Controls; Basic Operations; Recording Options; Playing Options; Additional Features; and Information You May Need. The instructions explain all of the TV/VCR’s features, which are listed below.
4 Table of Contents
Setting Up Your TV/VCR
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Before Using the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Hooking Up the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-7
Turning On the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Language Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Automatic Channel Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-11
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-17
Daylight-Savings Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Time Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Description of Controls
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22-23
Adjusting the Picture Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-25
On-Screen Status Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Reminder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Basic Operations
Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Recording Options
One-Touch Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Rerecording (Tape Duplication) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32-35
Defeat Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Playing Options
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
A-B Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38-39
Real-Time Counter Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Playback Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Additional Features
SmartLock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42-45
Wake Up Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Closed Caption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48-49
Blue Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Volume Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Automatic Operation Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Information You May Need
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Helpful Hints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54-55
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
• The remote control and its batteries are supplied.
• Do not mix alkaline and man­ganese batteries.
• Do not mix old and new batteries.
Before Using the TV/VCR 5
Putting Batteries in the Remote Control
1
Remove the battery compartment lid on the bottom of the remote control by sliding it in the direction of the arrow.
2
Place two AA batteries inside the battery compartment with their +and –ends aligned as indicated.
3
Replace the battery compartment lid.
Using the Remote Control
● Point the remote control at the TV/VCR’s remote sensor.
● Do not put objects between the remote control and the
TV/VCR.
TV/VCR Maintenance
● In this TV/VCR, use only tapes with the mark.
● Make sure any light adhesive stick-on notes are removed from
the video cassette tape before putting the tape in the TV/VCR. Removable labels like these can jam the TV/VCR.
● Periodic maintenance is required to maintain your TV/VCR’s
excellent performance. This TV/VCR has an automatic head cleaning system. However, the video heads will eventually require cleaning or replacement. Only an authorized service cen­ter should perform this service.
Video cassette tapes have record tabs to ensure that recordings are not accidentally erased.
1
To prevent accidental recording, break off the tab with a screwdriver.
2
To record again, cover the hole with cellophane tape.
Recording Prevention
Helpful Hints
1 2
1 2
3
6 Hooking Up the TV/VCR
ANT.
ANT.
Hooking Up Your TV/VCR With a Cable Signal or Outdoor Antenna
ANT.
IN
OUT
ANT.
Connect an RF coaxial cable (75­ohm, not supplied) to the OUT Jack on the Cable Box and to the ANT(enna) Jack on the TV/VCR.
Connect a Cable signal or an antenna to the ANT(enna) Jack.
Hooking Up Your TV/VCR With a Cable Box
To view any channel, set the TV/VCR to the Cable Box output channel (channel 03 or 04). Then, select channels at the Cable Box.
1
Hook up your TV/VCR using one of the connections shown.
A.
B.
ANT.
ANT.
Rod Antenna
(not supplied)
Hooking Up Your TV/VCR With an Indoor Antenna
To install a rod antenna (not sup­plied), push the stem of the antenna into the antenna hole on the top of the TV/VCR. Connect the antenna wire to the ANT(enna) Jack on the back of the TV/VCR as shown. Extend the antenna and adjust its length, direction, and angle for the clearest picture.
C.
Connect the Cable signal to the IN Jack on the Cable Box.
RF coaxial cable
(not supplied)
Hooking Up the TV/VCR (cont’d) 7
AUDIOVIDEO
STOP EJECT
REW PLAY F.FWD REC
OTR
CHANNEL
VOLUME
POWER
EARPHONE
OUT
IN
VIDEO
IN
OUT
3CH 4CH
AUDIO
ANT.
OUT
IN
VIDEO
IN
OUT
3CH 4CH
AUDIO
ANT.
VIDEOAUDIO
• Before connecting an antenna or cable signal to the ANT(enna) Jack, make sure the pin is not bent. If the pin is bent, straighten it as illustrated, then connect the antenna or cable signal to the ANT(enna) Jack.
• A rod antenna (not supplied) is available from Philips Service Solutions Group. The part number is 4835 303
37006. To order, call 1-800-851-8885. (This antenna will fit the CC13B1MG only.)
• Audio and video cables are not supplied.
Helpful Hints
Crooked Pin
Straight Pin
Bent pin
Plug
Cable
Hooking Up Your TV/VCR to Another Video Source (VCR or Camcorder)
You may need this connection if you want to copy tapes.
Details are on page 31.
AUDIO/VIDEO In Jacks on front of TV/VCR
AUDIO/VIDEO OUT Jacks on VCR
Use an Audio cable to connect the AUDIO OUT Jack on the VCR to the AUDIO In Jack on the front of the TV/VCR.
Use a Video cable to connect the VIDEO OUT Jack on the VCR to the VIDEO In Jack on the front of the TV/VCR.
2
Plug in the TV/VCR’s power cord.
3
Before you turn on the TV/VCR, go to page eight.
D.
8 Turning On the TV/VCR
Before you turn on the TV/VCR, make sure batteries are in the remote control and the TV/VCR is hooked up correctly. The instructions on this page work only when you turn on the TV/VCR for the first time.
1
Press the POWER button. The TV/VCR will come on and the
screen shown below will appear.
2
Press the PLAY/K button or the STOP/L button to select English or Spanish on-screen displays and menus.
3
Press the MENU button. The screen shown below will appear.
4
Press the FF/SEARCH/B button to begin automatic chan­nel setup. The TV/VCR will memorize all available channels.
When channels are set, CHANNELS ARE SET will appear on the screen briefly. Then the TV/VCR will go to the lowest channel programmed. (If you try to set up channels when there is no antenna or cable connected to the TV/VCR, programming will appear to take place, but eventually a NO TV SIGNALS ... message will appear on the screen. Connect an antenna or cable to the ANT(enna) jack on the TV/VCR, then press the FF/SEARCH/B button again. You may need to follow the steps on page 10 instead.)
CONNECT ANTENNA OR CABLE TO TVCR
THEN PRESS B
TO END PRESS EXIT
SELECT LANGUAGE
> ENGLISH ON
ESPAÑOL
SELECT KL OR PRESS MENU TO CONTINUE
5
Use the CHANNEL K/L buttons or the Number buttons on the remote control to select a TV/VCR channel. Use the VOLUME K/L buttons to adjust the sound.
• If you do not see any on-screen dis­plays when you turn on the TV/VCR, check your hookups, then try again. If you still do not see any on-screen displays, follow the steps on pages nine-10 to select a language and set up channels.
• To skip step 2, press the MENU button. All on-screen displays will be inEnglish. To skip step 4, press the STATUS/EXITbutton. Channels will not be set up, and CHANNELS NOT SET will appear on the screen briefly.
• You cannot set up channels if you are using a Cable Box.
• Line Input mode will always be stored in the TV/VCR’s memory as channel 00. When you select chan­nel 00, A/V IN will appear on the screen briefly. Press the CHANNEL K/L buttons or the Number but­tons to select another channel.
Helpful Hints
1
2
3 5
4
POWER CLEARSTATUS/EXIT
MENU
1 2 3
4 5 6
7 8 9
0
MUTE
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
MEMORY
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
STOP/
Language Selection 9
Follow the steps below to change the language of the on-screen displays and menus.
3
Press the PLAY/▲ button or the STOP/▼ button to choose SELECT LANGUAGE. Then, press the FF/SEARCH/B button.
4
Press the PLAY/▲ button or the STOP/▼ button to select ENGLISH or ESPAÑOL (Spanish).
5
Press the STATUS/EXIT button.
SELECT LANGUAGE
> ENGLISH ON
ESPAÑOL
SELECT KL TO END PRESS EXIT
1
Press the MENU button.
2
Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP. Then, press the FF/SEARCH/B button.
PRIMARY SETUP
> SELECT LANGUAGE
AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK
SELECT KL CHOOSE B TO END PRESS EXIT
> PRIM. SETUP
VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
PRESS B
2-4
• If you accidentally select Spanish and need English on-screen displays and menus:
1) Press the MENU button.
2) Press the PLAY/o button or the STOP/p button to select PREPARA­CION, then press the FF/SEARCH/B button.
3) Press the PLAY/o button or the STOP/p button to select SELEC­CION IDIOMA, then press the FF/SEARCH/B button.
4) Press the PLAY/o button or the STOP/p button to select ENGLISH.
5) Press the STATUS/EXIT button.
Helpful Hint
1
5
POWER CLEARSTATUS/EXIT
MENU
1 2 3
4 5 6
7 8 9
0
MUTE
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
MEMORY
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
STOP/
10 Automatic Channel Setup
Although the TV/VCR may automatically memorize the channels you receive when you turn it on for the first time, you may set up channels again by following the steps below.
1
Press the MENU button.
2
Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP, then press the FF/SEARCH/B button.
PRIMARY SETUP
> SELECT LANGUAGE
AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK
SELECT KL CHOOSE B TO END PRESS EXIT
3
Press the PLAY/▲ button or the STOP/▼ button to select AUTO PROGRAMMING, then press the FF/SEARCH/B button. AUTO CH PROGRAMMING ... will appear on the screen.
The TV/VCR distinguishes between TV channels and cable channels automatically, and the TV/VCR will memorize its available channels.
• Line Input mode will always be stored in the TV/VCR’s memory as channel 00. You cannot delete it.
Helpful Hint
4
Wait for a few minutes. When setup is complete, CHANNELS
ARE SET will appear on the screen. Then the programming of the lowest channel number placed in the TV/VCR’s memory will appear on the screen. Now, when you press the CHANNEL ▲/▼ buttons, you will scan only through channels you receive.
4
Wait for the TV/VCR to set up channels.
1
2-3
> PRIM. SETUP
VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
PRESS B
POWER CLEARSTATUS/EXIT
MENU
1 2 3
4 5 6
7 8 9
0
MUTE
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
MEMORY
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
STOP/
Automatic Channel Setup (cont’d) 11
4
Press the FF/SEARCH/B button or the REW(ind)/SEARCH/{ button to select SAVED (to add that channel) or DELETED (to delete that channel).
Repeat steps 3-4 to add or delete other channels.
5
Press the STATUS/EXIT button.
Programming of the channel you added or deleted will appear.
3
Press the CHANNEL ▲/▼ buttons to select the channel you want to add or delete.
• To review the channels memorized by the TV/VCR, follow these steps.
1) Press the MENU button.
2) Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP. Press the FF/SEARCH/B button.
3) Press the PLAY/▲ button or the STOP/▼ button to select CH MEM-
ORY REVIEW. Press the FF/SEARCH/B button. A list of pro­grammed channels will appear on the screen.
4) If all the programmed channels don’t fit on the screen, press the FF/SEARCH/B button. If you do not press the FF/SEARCH/B button within 10 seconds, the remaining channels will appear on the screen. (If there are no remaining channels, the previous menu will appear.) Or press the REW(ind)/SEARCH/{ button to see the previous screen of channels.
5) Press the STATUS/EXIT button once or twice.
Helpful Hint
1
Press the MENU button.
2
Press the PLAY/▲ button or the STOP/▼ button to select CHANNEL.
Adding/Deleting Channels
TO ADJUST PRESS { / B CH23
> CHANNEL
SMARTLOCK REVIEW EXIT PRIM. SETUP VCR PROGRAM
SAVED
TO ADJUST PRESS { / B CH123
> CHANNEL
SMARTLOCK REVIEW EXIT PRIM. SETUP VCR PROGRAM
SAVED
TO ADJUST PRESS { / B CH123
> CHANNEL
SMARTLOCK REVIEW EXIT PRIM. SETUP VCR PROGRAM
SAVED
1
2
3
5
4
POWER CLEARSTATUS/EXIT
MENU
1 2 3
4 5 6
7 8 9
0
MUTE
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
STOP/
REC/OTR PAUSE/STILL
MEMORY
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
12 Setting the Clock
• Entries that do not match the TV/VCR’s clock or calendar will cause a question mark (?) to appear on the screen.
• To make corrections while you are setting the clock, press the CLEAR button until the space for the informa­tion you want to correct is flashing. Then enter the correct information.
Helpful Hints
There are three ways to set the clock: Manually, with Automatic PBS Channel Selection, or with Manual PBS Channel Selection. With manual clock setting, you tell the TV/VCR the current time. With Automatic or Manual PBS Channel Selection, the TV/VCR gets the time from your local PBS station. If you use either Manual PBS Channel Selection or Automatic PBS Channel Selection, follow the steps on page 19 to have the TV/VCR maintain the clock according to your Time Zone.
Cable Box users must set the clock manually.
To set the clock manually, follow the steps on pages 12-13. To set the clock using Automatic PBS Channel Selection, follow the steps on pages 14-15. To set the clock using Manual PBS Channel Selection, follow the steps on pages 16-17. Before you begin, make sure:
● The TV/VCR is hooked up and turned on.
● Channels are set up.
● You make each entry within 60 seconds of the previous entry.
Manual Clock Setting
1
Press the MENU button.
2
Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP. Then, press the FF/SEARCH/B button.
PRIMARY SETUP
> SELECT LANGUAGE
AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK
SELECT KL CHOOSE B TO END PRESS EXIT
> PRIM. SETUP
VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
PRESS B
SET CLOCK
> AUTO CLOCK [ON]
SET MANUAL CLOCK DAYLIGHT SVG.TIME [ON] SET TIME ZONE
[AUTO]
TO CONTINUE PRESS MENU SELECT KL CHOOSE B
TO END PRESS EXIT
3
Press the PLAY/▲ button or the STOP/▼ button to select SET CLOCK. Then, press the FF/SEARCH/B button.
2-3
1
POWER CLEARSTATUS/EXIT
MENU
1 2 3
4 5 6
7 8 9
0
MUTE
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
MEMORY
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
STOP/
Setting the Clock (cont’d) 13
5
Press two Number buttons for the hour(s) and two Number buttons for the minute(s). Then press 1 for AM or 2 for PM. For example, for 9:30 PM, press 09, 30, 2.
SET MANUAL CLOCK
TIME 09 : 30 PM
MONTH – – / – – / – – – –
TO CORRECT PRESS CLEAR TO END PRESS EXIT
6
Press two Number buttons for the month, two Number buttons for the day, and two Number buttons for the year. For example, for July 1, 2000, press 07, 01, 00. The day of
the week will appear automatically.
7
Press the STATUS/EXIT button.
SET MANUAL CLOCK
TIME 09 : 30 PM DATE 07 / 01 / 2000
SATURDAY
TO CORRECT PRESS CLEAR TO END PRESS EXIT
4
Press the PLAY/▲ button or the STOP/▼ button to select SET MANUAL CLOCK, then press the FF/SEARCH/B button.
SET MANUAL CLOCK
TIME – – : – – DATE – – / – – / – – – –
TO END PRESS EXIT
5-6
7
4
POWER CLEARSTATUS/EXIT
1 2 3
4 5 6
7 8 9
0
CHANNEL
SLEEP/WAKE UP
MUTE
SPEED
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
STOP/
ALT.CH
MENU
MEMORY
14 Setting the Clock (cont’d)
Automatic PBS Channel Selection
4
If ON appears beside AUTO CLOCK, press the MENU button. If OFF appears beside AUTO CLOCK, press the PLAY/▲ button or the STOP/▼ button to select AUTO CLOCK. Then, press the FF/SEARCH/B button so that ON appears to the right of AUTO CLOCK, then press the MENU button.
1
Press the MENU button.
2
Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP. Then, press the FF/SEARCH/B button.
PRIMARY SETUP
> SELECT LANGUAGE
AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK
SELECT KL CHOOSE B TO END PRESS EXIT
3
Press the PLAY/▲ button or the STOP/▼ button to select SET CLOCK. Then, press the FF/SEARCH/B button.
2-4
AUTO CLOCK AUTO CLOCK USES PBS CHANNEL DATA
> SET PBS CH. AUTO
SET PBS CH. MANUAL
SELECT KL CHOOSE B TO END PRESS EXIT
> PRIM. SETUP
VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
PRESS B
1,4
SET CLOCK
> AUTO CLOCK [ON]
SET MANUAL CLOCK DAYLIGHT SVG.TIME [ON] SET TIME ZONE
[AUTO]
TO CONTINUE PRESS MENU SELECT KL CHOOSE B
TO END PRESS EXIT
REW/SEARCH PLAY/ FF/SEARCH
POWER CLEARSTATUS/EXIT
MENU
1 2 3
4 5 6
7 8 9
0
MUTE
VOLUME
REC/OTR PAUSE/STILL
MEMORY
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
STOP/
Setting the Clock (cont’d) 15
7
When the TV/VCR finds the PBS channel, the time will appear on the screen. Press the STATUS/EXIT button.
6
NOW SEARCHING flashes on the TV/VCR screen.
● If CANNOT FIND CLOCK DATA flashes on the TV/VCR
screen, you will be prompted to turn off the TV/VCR. Turn off the TV/VCR. Leave it off for several minutes. When
you turn on the TV/VCR again, the clock will be set.
• To display the time on the TV/VCR screen, press the STATUS/EXIT but­ton. Details are on page 26.
• You cannot use the AUTO CLOCK feature if you don’t receive a PBS channel that carries a time signal in your area. Set the clock manually.
Helpful Hints
5
Press the PLAY/▲ button or the STOP/▼ button to select SET PBS CH. AUTO. Then, press the FF/SEARCH/B button.
SET AUTO CLOCK
TIME – – : – – DATE – – / – – / – – – – NOW SEARCHING
TO END PRESS EXIT
SET AUTO CLOCK
TIME 06 : 30 PM DATE 07 / 01 / 2000
SATURDAY
TO END PRESS EXIT
SET AUTO CLOCK
TIME – – : – – DATE – – / – – / – – – –
CANNOT FIND CLOCK DATA TO END PRESS EXIT
6
Wait for the TV/VCR to find the time.
7
5
POWER CLEARSTATUS/EXIT
1 2 3
4 5 6
7 8 9
0
CHANNEL
SLEEP/WAKE UP
MUTE
SPEED
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
STOP/
ALT.CH
MENU
MEMORY
16 Setting the Clock (cont’d)
Manual PBS Channel Selection
4
If ON appears beside AUTO CLOCK, press the MENU button. If OFF appears beside AUTO CLOCK, press the PLAY/▲ button or the STOP/▼ button to select AUTO CLOCK. Then, press the FF/SEARCH/B button so that ON appears to the right of AUTO CLOCK, then press the MENU button.
1
Press the MENU button.
2
Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP. Then, press the FF/SEARCH/B button.
PRIMARY SETUP
> SELECT LANGUAGE
AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK
SELECT KL CHOOSE B TO END PRESS EXIT
AUTO CLOCK AUTO CLOCK USES PBS CHANNEL DATA
> SET PBS CH. AUTO
SET PBS CH. MANUAL
SELECT KL CHOOSE B TO END PRESS EXIT
> PRIM. SETUP
VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
PRESS B
3
Press the PLAY/▲ button or the STOP/▼ button to select SET CLOCK. Then, press the FF/SEARCH/B button.
SET CLOCK
> AUTO CLOCK [ON]
SET MANUAL CLOCK DAYLIGHT SVG.TIME [ON] SET TIME ZONE
[AUTO]
TO CONTINUE PRESS MENU SELECT KL CHOOSE B
TO END PRESS EXIT
2-4
1,4
REW/SEARCH PLAY/ FF/SEARCH
POWER CLEARSTATUS/EXIT
MENU
1 2 3
4 5 6
7 8 9
0
MUTE
VOLUME
REC/OTR PAUSE/STILL
MEMORY
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
STOP/
Setting the Clock (cont’d) 17
8
When the TV/VCR finds the clock data, the time will appear on the screen. Press the STATUS/EXIT button.
6
Use the Number buttons to select your PBS station.
● If CANNOT FIND CLOCK DATA flashes on the
TV/VCR screen and you know another PBS channel, press the PLAY/▲ button or the STOP/▼ button to choose SELECT NEW PBS CH. Then, press the FF/SEARCH/B button. Repeat step 6.
● If CANNOT FIND CLOCK DATA flashes on the
TV/VCR screen and you do not know another channel, press the PLAY/▲ button or the STOP/▼ button to select SET PBS CH. AUTO. Then, press the FF/SEARCH/B button. The TV/VCR will search for the PBS
channel automatically.
• If the PBS channel is found, the time will appear on the screen.
• If the PBS channel is not found, you will be prompted to turn off the TV/VCR. Leave it off for several minutes. When you turn on the TV/VCR again, the time will be set.
AUTO CLOCK (PBS) CH 02
TIME – – : – – DATE – – / – – / – – – –
SELECT CHANNEL NUMBER TO END PRESS EXIT
AUTO CLOCK (PBS) CH 12
TIME 06 : 30 PM DATE 07 / 01 / 2000
SATURDAY
TO END PRESS EXIT
7
NOW SEARCHING flashes on the TV/VCR screen.
AUTO CLOCK (PBS) CH 12
TIME – – : – – DATE – – / – – / – – – – NOW SEARCHING
TO END PRESS EXIT
7
• If you have an Antenna hookup, you may select channels 2-69 at step 6. If you have a cable connection (but no Cable Box), you may select chan­nels 1-125 at step 6. Details about available memorized channels are on page 11.
• To display the time on the TV/VCR screen, press the STATUS/EXIT but­ton. Details are on page 26.
Helpful Hints
Wait for the TV/VCR to find the time.
5
Press the PLAY/▲ button or the STOP/▼ button to select SET PBS CH. MANUAL. Then, press the FF/SEARCH/B button.
6
5
8
POWER CLEARSTATUS/EXIT
MENU
1 2 3
4 5 6
7 8 9
0
MUTE
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
MEMORY
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
STOP/
18 Daylight-Savings Time
4
Press the PLAY/▲ button or the STOP/▼ button to select DAYLIGHT SVG.TIME. Then, press the FF/SEARCH/B button so that ON or OFF appears beside DAYLIGHT SVG. TIME (Daylight Savings Time).
5
Press the STATUS/EXIT button.
1
Press the MENU button.
2
Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP. Then, press the FF/SEARCH/B button.
PRIMARY SETUP
> SELECT LANGUAGE
AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK
SELECT KL CHOOSE B TO END PRESS EXIT
3
Press the PLAY/▲ button or the STOP/▼ button to select SET CLOCK. Then, press the FF/SEARCH/B button.
When the Daylight-Savings Time feature is ON, the TV/VCR clock will automatically move forward one hour on the first Sunday in April and move back one hour on the last Sunday in October. To turn Daylight-Savings Time ON or OFF, follow the steps below.
> PRIM. SETUP
VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
PRESS B
2-4
1
5
SET CLOCK
> AUTO CLOCK [ON]
SET MANUAL CLOCK DAYLIGHT SVG.TIME [ON] SET TIME ZONE
[AUTO]
TO CONTINUE PRESS MENU SELECT KL CHOOSE B
TO END PRESS EXIT
POWER CLEARSTATUS/EXIT
MENU
1 2 3
4 5 6
7 8 9
0
MUTE
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
MEMORY
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
STOP/
Time Zone 19
When you set the clock using AUTO CLOCK, specify your time zone. The TV/VCR will maintain the clock according to your time zone.
• If you select AUTO at step 5, the TV/VCR will set the clock according to the time zone data of the PBS station it finds.
• You cannot select SET TIME ZONE at step 4 if AUTO CLOCK is set to OFF.
• You may need to turn off the TV/VCR for several minutes to enable the TV/VCR to adjust the clock according to your time zone.
Helpful Hints
5
Press the PLAY/▲ button or the STOP/▼ button to select your time zone.
6
Press the MENU button, then press the STATUS/EXIT button.
1
Press the MENU button.
2
Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP. Then, press the FF/SEARCH/B button.
PRIMARY SETUP
> SELECT LANGUAGE
AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK
SELECT KL CHOOSE B TO END PRESS EXIT
SET TIME ZONE
> AUTO [ON]
ATLANTIC EASTERN CENTRAL MOUNTAIN PACIFIC ALASKA HAWAII
SELECT KL TO CONTINUE PRESS MENU
> PRIM. SETUP
VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
PRESS B
3
Press the PLAY/▲ button or the STOP/▼ button to select SET CLOCK. Then, press the FF/SEARCH/B button.
4
Press the PLAY/▲ button or the STOP/▼ button to select SET TIME ZONE. Then, press the FF/SEARCH/B button.
1
2-5
SET CLOCK
> AUTO CLOCK [ON]
SET MANUAL CLOCK DAYLIGHT SVG.TIME [ON] SET TIME ZONE
[AUTO]
TO CONTINUE PRESS MENU SELECT KL CHOOSE B
TO END PRESS EXIT
6
POWER CLEARSTATUS/EXIT
MENU
1 2 3
4 5 6
7 8 9
0
MUTE
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
MEMORY
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
STOP/
20 Front Panel
AUDIO VIDEO
STOP EJECT
REW PLAY F.FWD REC
OTR
CHANNEL
VOLUME
POWER
EARPHONE
Cassette Compartment
Insert a video cassette tape here.
POWER Button
Press to turn the power on or off.
VOLUME o/p Buttons
Press to adjust the sound level. Press the CHANNEL o button and the VOLUME p button on the TV/VCR at the same time to display the pop up menu. Press again to remove the pop up menu.
STOP/EJECT Button
Press once to stop the tape. When playback is stopped, press to eject the tape. Press to select an item in the menu.
PLAY Button
Press to play a tape. Details are on page 28. Press to release Search or Still mode and return to normal playback. Details are on page
41. Press to select an item in the menu.
REC(ord)/OTR Button
Press once to start a recording. Details are on page 29. Press repeatedly to start a One-
Touch Recording (an immediate timed recording, 30 minutes to eight hours long) of the channel you are watching. Details are on
page 30.
REW(ind) Button
When tape playback is stopped, press to rewind the tape at high speed. During playback, press to rewind the tape while the picture stays on the screen. Press to change a setting of a pop up menu item (for example, to adjust the BRIGHT­NESS) or to return to the previous menu.
F. FWD (fast forward) Button
When tape playback is stopped, press to fast forward the tape at high speed. During play­back, press to fast forward the tape while the picture stays on the screen. Press to change a setting of a menu item (for example, to adjust the BRIGHTNESS) or to advance to the next menu.
RECORD Light
This light appears during a recording. It flashes slowly when the TV/VCR power is turned off to set a timer recording. It blinks rapidly when a recording is paused or when the power is off for a timer recording, but there is no tape in the TV/VCR. It will blink rapidly two minutes before a timer recording is set to begin if the TV/VCR power is on.
Wireless Remote Sensor
Receives a signal from your remote control so you can operate the TV/VCR from a distance.
CHANNEL o/p Buttons
Press to scan through the TV/VCR channels. During tape playback, press to adjust the tracking. Details are
on page 52.
Press the CHANNEL o button and the VOLUME p button on the TV/VCR at the same time to display the pop up menu. Press again to remove the pop up menu.
EARPHONE Jack
Connect earphones (not supplied) here for personal listening.
AUDIO In Jack
Connect this jack to the audio out jack of a camcorder or a VCR. Details are on page 31.
VIDEO In Jack
Connect this jack to the video out jack of a camcorder or a VCR. Details are on page 31.
Rear Panel 21
ANT(enna) Jack
Connect your antenna or cable here.
Details are on pages six-seven.
Antenna Hole
Connect the stem of an indoor antenna here. Details are on page six.
AC Power Cord
Connect to a standard AC outlet to supply power to the TV/VCR.
ANT.
POWER CLEARSTATUS/EXIT
1 2 3
4 5 6
7 8 9
0
CHANNEL
SLEEP/WAKE UP
MUTE
SPEED
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
STOP/
ALT.CH
MENU
MEMORY
MENU Button
Press to display the pop up menu. You also may use the buttons on the front panel of the TV/VCR to access the pop up menu.
Details are on page 20.
STATUS/EXIT Button
Press to see the status display. Press again to remove the status display. Details are on page 26. Press to exit the menu.
22 Remote Control Buttons
STOP/▼ Button
Press to stop the tape. Press to select an item in the menu.
VOLUME
▲/▼ Buttons
Press to adjust the sound level. If you press the VOLUME ▲/▼ buttons when the sound is muted, the sound will be restored.
POWER Button
Press to turn on or off the TV/VCR.
REC(ord)/OTR Button
Press once to start a recording. Details are on page 29. Or, press repeatedly to start a One-Touch Recording (an immediate timed recording, 30 minutes to eight hours long) of the channel you are watching. Details are on page 30.
Number Buttons
Use to select channels and to program TV/VCR functions (such as setting the clock).
● Cable Users
Enter channel numbers as a two-digit number for the quickest results. For example, to select channel 6, press 0,6. If you only press the Number 6 button, channel 6 will be selected after a brief delay. (There also may be a brief delay when you select channels 10, 11, and 12.) If you want to select channels 100 and above, enter channel numbers as a three-digit number. For example, to select channel 117, press 1, 1, 7.
● Antenna Users
Enter channel numbers as a two-digit number for the quickest results. You may only select channels 2-69. For example, to select channel 5, press 0,5. If you only press the Number 5 button, channel 5 will be selected after a brief delay.
CLEAR Button
Press to erase incorrect data when programming TV/VCR func­tions. Also, press to reset the real-time counter to 0:00:00.
Details are on page 40.
REW(ind)/SEARCH/{ Button
When tape playback is stopped, press to rewind the tape at high speed. During tape playback, press to rewind the tape while the picture stays on the screen. Details are on page 41. Press to change a setting of a pop up menu item or to return to a previous menu.
POWER CLEARSTATUS/EXIT
1 2 3
4 5 6
7 8 9
0
CHANNEL
SLEEP/WAKE UP
MUTE
SPEED
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
STOP/
ALT.CH
MENU
MEMORY
Remote Control Buttons (cont’d) 23
FF/SEARCH/B Button
When tape playback is stopped, press to fast forward the tape at high speed. During tape playback, press to fast forward the tape while the picture stays on the screen. Details are on page 41. Press to change the setting of an item in the on-screen menu or press to proceed to the next menu.
CHANNEL
▲/▼ Buttons
Press to scan through the TV/VCR’s channels.
ALT. CH (Alternate Channel) Button
Press to return to the TV channel you were viewing immediately before switching to your current channel.
MEMORY Button
Press to memorize a tape position at which the real-time counter was set to 0:00:00. Details are on page 40. Or, press to memorize the start and end positions on a tape when setting up A-B Repeat Play. Details are on pages 38-39.
PLAY/
▲ Button
Press to play a tape. Details are on page 28. Press to release Search or Still mode and return to normal playback. Details are on page
41. Press to select an item in the menu.
SLEEP/WAKE UP Button
Press to set the Sleep Timer. Details are on page 47. Press to set the Wake Up Timer. Details are on page 46.
SPEED Button
Press to select the recording speed (SP or SLP).
MUTE Button
Press to eliminate the TV/VCR’s sound. Press again to return to the previous volume level.
PAUSE/STILL Button
During recording, press to temporarily stop the recording. Press again to resume recording. Details are on page 29. You cannot pause a One-Touch Recording. During tape playback, press to freeze the picture (still). Each time you press the PAUSE/STILL button, the noise lines will change position on the screen. Details are on page 41.
TO ADJUST PRESS { / B
24 Adjusting the Picture Controls
Follow these steps to adjust the TV/VCR’s brightness, picture, color, tint, and sharpness.
1
Press the MENU button.
2
Press the PLAY/▲ button or the STOP/▼ button to select the desired control (BRIGHTNESS, for example).
3
Press the REW(ind)/SEARCH/{ button or the FF/SEARCH/B button to adjust the control. (Refer to the
chart on page 25.)
4
When you finish, press the STATUS/EXIT button.
• The on-screen menus shown on page 25 will disappear if no adjust­ments are made within 60 seconds.
• The original settings will probably give you the best picture quality.
• To reset the picture controls to the original settings, press the MENU button, then press the PLAY/▲ but­ton or the STOP/▼ button to select TV RESET, then press the FF/SEARCH/B button. TV RESET COMPLETED will appear on the screen briefly.
Helpful Hints
> BRIGHTNESS
PICTURE COLOR TINT SHARPNESS TV RESET
1
4
2
3
K
K
POWER CLEARSTATUS/EXIT
MENU
1 2 3
4 5 6
7 8 9
0
MUTE
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
MEMORY
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
STOP/
Adjusting the Picture Controls (cont’d) 25
Decrease Increase
BRIGHTNESS decreased brightness increased brightness
PICTURE decreased contrast increased contrast
COLOR paler more brilliant
TINT more purple more green
SHARPNESS softer clearer
Press the REW(ind)/SEARCH/{
button to decrease a picture control. Press
the FF/SEARCH/B button to increase a picture control.
AUDIO VIDEO
STOP EJECT
REW PLAY F.FWD REC
OTR
CHANNEL
VOLUME
POWER
EARPHONE
TO ADJUST PRESS { / B
TO ADJUST PRESS { / BTO ADJUST PRESS { / B
Press the STOP/▼ button
Press the PLAY/▲ button
> BRIGHTNESS
PICTURE COLOR TINT SHARPNESS TV RESET
BRIGHTNESS
> PICTURE
COLOR TINT SHARPNESS TV RESET
BRIGHTNESS PICTURE
> COLOR
TINT SHARPNESS TV RESET
TO ADJUST PRESS { / B
BRIGHTNESS PICTURE COLOR
> TINT
SHARPNESS TV RESET
TO ADJUST PRESS{ / B
BRIGHTNESS PICTURE COLOR TINT
> SHARPNESS
TV RESET
K
K
K
K
K
K
K
K
K
K
• You cannot view closed captions during recording or tape playback if COUNTER ONLY is set to ON. Details are on pages 48-49.
• If STATUS is set to ON, closed cap­tions will be interrupted briefly when you insert or remove a tape. Details are on page 48-49.
Helpful Hint
1
Press the MENU button.
Current Tape Function
Time
Channel
Counter and Counter Memory
Tape Speed
12:00 AM STOP CH10
SLP M 1:23:45
A status display will appear when you press the STATUS/EXITbut­ton or certain function buttons. The contents of the status display will vary. To choose the status display mode, follow the steps below.
If you select STATUS ON, then select COUNTER ONLY
OFF:
● Whenever you press the STOP/p button or the PLAY/o button,
the status display will appear for five seconds. Portions of the sta­tus display also may appear when you press other function but­tons.
If you select STATUS ON, then select COUNTER ONLY
ON:
● Whenever you press the PLAY/o button, the status display will
appear for five seconds. After five seconds, only the counter will remain on the screen. Portions of the status display also may appear when you press other function buttons.
If you select STATUS OFF:
● The status display will not appear when you press function but-
tons. You must press the STATUS/EXIT button to see the status display.
2
Press the PLAY/▲ button or the STOP/▼ button to select VCR SETUP, then press the FF/SEARCH/B button.
3
Press the PLAY/▲ button or the STOP/▼ button to select ON-SCREEN MODE, then press the FF/SEARCH/B button.
26 On-Screen Status Displays
4
Press the PLAY/o button or the STOP/p button to select STATUS, then press the FF/SEARCH/B button so that ON or OFF appears beside STATUS.
5
If you set STATUS to OFF, go to step 6. If you set STATUS to ON, press the PLAY/o button or the STOP/p button to select COUNTER ONLY, then press the FF/SEARCH/B button so that ON or OFF appears beside it.
6
Press the STATUS/EXIT button.
ON-SCREEN MODE
> STATUS [ON]
COUNTER ONLY [OFF]
SELECT KL CHOOSE B TO END PRESS EXIT
Reminder 27
The channel number will remain on the screen at all times when you set REMINDER to ON. The exceptions are during tape play­back or when closed captioning is selected. Set REMINDER to ON or OFF by following the steps below.
1
Press the MENU button.
2
Press the PLAY/▲ button or the STOP/▼ button to select REMINDER.
3
Press the REW(ind)/SEARCH/{ button or the FF/SEARCH/B button to select ON or OFF. Each press of
the REW(ind)/SEARCH/{ button or the FF/SEARCH/B button turns REMINDER ON or OFF.
4
Press the STATUS/EXIT button.
TO ADJUST PRESS { / B
> REMINDER
BRIGHTNESS PICTURE COLOR TINT SHARPNESS
OFF
TO ADJUST PRESS { / B
CH12
> REMINDER
BRIGHTNESS PICTURE COLOR TINT SHARPNESS
ON
1
4
2
TO ADJUST PRESS { / B
> REMINDER
BRIGHTNESS PICTURE COLOR TINT SHARPNESS
OFF
3
POWER CLEARSTATUS/EXIT
1 2 3
4 5 6
7 8 9
0
CHANNEL
SLEEP/WAKE UP
MUTE
SPEED
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
STOP/
ALT.CH
MENU
MEMORY
28 Playing
• If the tape you want to play is already in the TV/VCR, turn on the TV/VCR power, then press the PLAY/▲ button.
• Playback features and options are on pages 37-41.
• When you play a tape recorded in S-VHS format on this unit, you can not get the high resolution that would be available on an S-VHS VCR. Noise lines (black and white streaks) may appear on the picture.
Helpful Hints
Follow the steps below to play a tape.
1
Insert a tape in the TV/VCR. The power will come on. If the
tape’s record tab has been removed, playback should start auto­matically.
2
If playback does not start automatically, press the PLAY/▲ button to start playback.
3
Press the STOP/▼ button on the remote control or the STOP/EJECT button on the TV/VCR once to stop play­back.
4
Press the REW(ind)/SEARCH/{ button to rewind the tape.
5
When the tape has finished rewinding, press the STOP/EJECT button on the TV/VCR to remove the tape.
1 5
3
Press the STOP/EJECT button on the TV/VCR.
Insert a tape in the TV/VCR.
S-VHS Quasi Play Back (SQPB)
This unit has a SQPB function that allows you to view a tape recorded in S-VHS format. A tape recorded in S-VHS format will play the same as a tape recorded in normal format. This unit detects whether the tape is recorded in S-VHS format or in nor-mal format.
4
POWER CLEARSTATUS/EXIT
1 2 3
4 5 6
7 8 9
0
CHANNEL
SLEEP/WAKE UP
MUTE
SPEED
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
STOP/
ALT.CH
MENU
MEMORY
2
Recording 29
• You cannot record one channel while watching another.
• Recording options are on pages 30-36.
• You cannot record if DEFEAT RECORDING is set to ON. (REC DEFEATED will flash on the screen.) Details are on page 36.
• If you pause a recording for more than five minutes, the TV/VCR will switch to Stop mode automatically to protect the video cassette tape from damage.
• You can change the tape speed with the SPEEDbutton while a recording is in progress, but some distortion may appear on the tape.
Helpful Hints
Read and follow the steps below to record a TV program.
1
Place a tape with its record tab intact (see page five) in the TV/VCR. The power will come on. Or, if the tape is already in the TV/VCR, press the POWER button to turn on the TV/VCR, if necessary.
2
Press the SPEED button until the desired tape speed appears on the TV/VCR screen. Details about tape speed are given
below.
6
To stop recording, press the STOP/▼ button.
3
Use the CHANNEL ▲/▼ buttons or the Number buttons to select the channel to be recorded. (Channels cannot be changed
during recording.)
4
Press the REC(ord)/OTR button once to start recording.
The RECORD light will glow.
● If there is not a tape in the TV/VCR, NO CASSETTE flashes on
the screen briefly.
● If the tape does not have a record tab, PROTECTED CASSETTE
CANNOT RECORD flashes on the screen briefly. The TV/VCR will eject the tape. Insert another tape.
5
To pause the recording (for example, during commercials), press the PAUSE/STILL button. The RECORD light will flash. To resume recording, press the PAUSE/STILL button again or the REC(ord)/OTR button. The RECORD light will glow.
Cassette type / Playback Time Tape Speed T160 T120 T60 SP(Standard Play) 2 hrs.
2 hrs. 1 hr.
40 mins.
LP(Long Play) 5 hrs.
4 hrs. 2 hrs.
(playback only) 20 mins.
SLP(Super Long Play)
8 hrs. 6 hrs. 3 hrs.
Tape Speeds
This chart shows the recording/playback time for three types of video cassettes (T160, T120, and T60). There are three playback speeds: SP, LP, and SLP. During playback, the VCR selects the tape speed automatically. When recording, you can change the tape speed using the SPEED button. You cannot record in LP speed.
1
2
4
3
6
5
POWER CLEARSTATUS/EXIT
MENU
1 2 3
4 5 6
7 8 9
0
MUTE
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
MEMORY
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
STOP/
30 One-Touch Recording
The One-Touch Recording (OTR) function allows you to program an immediate timed recording from 30 minutes to eight hours long without setting the timer. Before you begin, make sure:
● Channels are set up.
● There is a tape in the TV/VCR. The record tab must be intact.
1
Use the CHANNEL ▲/▼ buttons or the Number buttons to select the channel you want to record.
4
2
Press the SPEED button until the desired recording speed (SP or SLP) appears on the screen. Details are on page 29.
3
Press the REC(ord)/OTR button repeatedly until the desired
recording length appears in the upper right corner of the screen. Recording will begin immediately. The RECORD light will appear.
OTR LENGTH 0:30 CH12
LENGTH : PRESS OTR CANCEL : PRESS CLEAR
4
To stop an OTR before recording is finished, press the STOP/EJECT button on the TV/VCR. Or, press the REC(ord)/OTR button, then press the CLEAR button, then press the STOP/▼ button on the remote con­trol.
• To check the time remaining for an OTR after the OTRhas been set, press the STATUS/EXITbutton.
• To change the recording length while an OTR is in progress, press the REC(ord)/OTRbutton until the desired recording length appears on the screen.
• You can not pause an OTR.
• To cancel an OTR but continue recording, press the REC(ord)/OTR button, then press the CLEAR but­ton.
• You cannot record if DEFEAT RECORDING is set to ON. Details are on page 36.
• You can change the tape speed with the SPEEDbutton while a recording is in progress, but some distortion may appear on the tape.
Helpful Hints
Press the STOP/EJECT but­ton on the TV/VCR to stop the OTR.
2
3
POWER CLEARSTATUS/EXIT
1 2 3
4 5 6
7 8 9
0
CHANNEL
SLEEP/WAKE UP
MUTE
SPEED
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
STOP/
ALT.CH
MENU
MEMORY
1
Rerecording (Tape Duplication) 31
• Unauthorized recording of copy­righted television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws.
• If a program has copyright protec­tion, it may not record clearly.
• Different brands of equipment may operate differently.
• Make sure all connections are secure. Otherwise, you may not record both picture and sound.
• Audio and video cables are not included.
Helpful Hints
5
Point the TV/VCR remote control at the TV/VCR. Press the SPEED button until the desired tape speed (SP or SLP) appears on the screen.
VIDEO
IN
OUT
AUDIO
Audio Cable (white) from AUDIO OUT to AUDIO In
Video Cable (yellow) from
VIDEO OUT to VIDEO In
AUDIO VIDEO
STOP EJECT
R
EARPHONE
AUDIO and VIDEO OUT Jacks on source unit
(VCR or Camcorder)
AUDIO and VIDEO In
Jacks on TV/VCR
2
The source unit will play your tape. Insert a prerecorded tape in the source unit. If playback begins, press the STOP button on the
unit.
3
The TV/VCR will record your tape. Insert a blank tape in the TV/VCR. Make sure the tape’s record tab is intact. The TV/VCR
power will turn on automatically.
4
Point the TV/VCR remote control at the TV/VCR. Press Number buttons 0, 0 so that A/V IN appears on the screen.
6
Press the PLAY button on the source unit and the REC(ord)/OTR button on your TV/VCR at the same time.
Copying will begin.
7
To stop copying, press the STOP/EJECT button on the TV/VCR, then stop the tape on the source unit (VCR or camcorder).
1
Make the connections shown above, using audio and video cables. Connect the source unit (VCR or camcorder) to a power source after connections are made.
32 Timer Recording
Follow the steps below to program the TV/VCR to record TV programs while you’re away from home. The TV/VCR will turn itself on, record, and turn itself off automatically. Before you begin, make sure:
● The clock is set. If not, CLOCK MUST BE SET appears, fol-
lowed by the SET CLOCK menu.
● Channels are set up.
● There is a tape in the TV/VCR. (Make sure the tape’s record
tab is intact and the tape is long enough to record the pro­gram.)
Complete each step within 60 seconds of completing the previous step. If you don’t, you may start again at step 1.
2
Press the PLAY/▲ button or the STOP/▼ button to select VCR PROGRAM, then press the FF/SEARCH/B button.
3
Press the PLAY/▲ button or the STOP/▼ button to select a ONCE, DAILY, OR WEEKLY recording. Then, press the FF/SEARCH/B button.
●ONCE: The TV/VCR will record a TV program on any day you
choose, up to 12 months away.
●DAILY: The TV/VCR will record every day from Monday to
Friday – starting at the same time and recording the same channel for the same length of time.
● WEEKLY: The TV/VCR will record the same channel on the
same day, at the same time, and for the same length of time every week.
1
Press the MENU button.
• With ShowGuard, you don’t have to worry about losing your timer recordings. If the power fails, pro­grammed timer recordings will be restored when the clock is reset. (The clock will reset itself automati­cally if you are using the AUTO CLOCK feature. Details are on pages 14-17. If you are not using the AUTO CLOCK feature, reset the clock manually. Details are on pages 12-13.) The timer recording will not occur only if the timer recording was scheduled to take place during the power failure.
• You cannot set a timer recording if DEFEAT RECORDING is set to ON. Details are on page 36.
Helpful Hints
> PRIM. SETUP
VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
PRESS B
DAILY PROGRAM (MON-FRI)
PROGRAM -1 2 3 4 5 6 7 8-
SELECT PROGRAM NUMBER TO END PRESS EXIT
Daily Recording (example)
VCR PROGRAM
> ONCE
DAILY(MON-FRI) WEEKLY PROGRAM REVIEW
SELECT KL CHOOSE B TO END PRESS EXIT
2-3
1
POWER CLEARSTATUS/EXIT
MENU
1 2 3
4 5 6
7 8 9
0
MUTE
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
MEMORY
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
STOP/
ONE TIME PROGRAM
PROGRAM 1 CHANNEL – – –
TO CORRECT PRESS CLEAR TO END PRESS EXIT
Timer Recording (cont’d) 33
5
Use the Number buttons to enter the channel of the TV program you want to record.
● If you are recording from line input, press 0, 0. A/V IN will
appear on the screen.
● If you are recording using a Cable Box, enter the Cable Box
output channel (03 or 04). Be sure to select the channel of the TV program at the Cable Box and leave the Cable Box on for the timer recording.
4
Use the Number buttons (1-8) to select a position in which to store the timer recording. Flashing numbers indi-
cate an open position (one in which a timer recording has not been stored yet).
NOTE: If you select a number that already has been used to store a timer recording, PREVIOUSLYSET PROGRAM will appear on the screen for a few seconds. Then information about the program in that position will appear on the screen. If this happens, press the STATUS/EXIT but­ton. Then use the Number buttons to select another position.
6
Press two Number buttons for the hour(s) you want the recording to begin. Press two Number buttons for the minute(s) you want the recording to begin. Press 1 for AM or 2 for PM. For example, for 9:30 PM, press 09, 30, 2.
ONE TIME PROGRAM
PROGRAM 1 CHANNEL 10
TIME ON – – : – –
TO CORRECT PRESS CLEAR TO END PRESS EXIT
7
Follow the instructions in step 6 to set the recording’s stop time. (AM or PM will be set automatically.)
ONE TIME PROGRAM
PROGRAM 1 CHANNEL 10
TIME ON 09:30 PM TIME OFF – – : – –
TO CORRECT PRESS CLEAR TO END PRESS EXIT
• If the numbers entered do not match the TV/VCR’s clock or calen­dar, the entry will be rejected and a question mark will appear on the screen.
• To make corrections while you are programming a timer recording, press the CLEAR button until the item you want to change starts flashing. Then enter the correct information.
Helpful Hints
4-7
Instructions continue on page 34.
POWER CLEARSTATUS/EXIT
MENU
1 2 3
4 5 6
7 8 9
0
MUTE
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
MEMORY
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
STOP/
34 Timer Recording (cont’d)
Turn off the TV/VCR for the recording.
Insert a tape in the TV/VCR.
Leave the Cable Box/DBS on (if applicable).
8
Press the Number 1 button to record in SP speed or press the Number 2 button to record in SLP speed. Details about tape
speed are on page 29. You cannot use the SPEEDbutton at this time.
9
Press two Number buttons for the month and two Number buttons for the day you want the program to record. For
example, for July 10, 2000, press 07, 10. The day of the week and the year will be displayed automatically. (You cannot program the TV/VCR to record more than one year in advance.) If you selected a DAILY recording at step 3, you can not enter a date that is a Saturday or Sunday.
ONE TIME PROGRAM
PROGRAM 1 CHANNEL 10
TIME ON 09:30 PM TIME OFF 11:00 PM REC SPEED SLP
SP=1 SLP=2
TO CORRECT PRESS CLEAR TO END PRESS EXIT
ONE TIME PROGRAM
PROGRAM 1 CHANNEL 10
TIME ON 09:30 PM TIME OFF 11:00 PM REC SPEED SLP START DATE 07/10/2000
MONDAY
TO CORRECT PRESS CLEAR TO END PRESS EXIT
10
Press the STATUS/EXIT button. PROGRAM WAS COMPLET-
ED PLEASE TURN OFF FOR TIMER RECORDING will appear on the screen.
● If there is not a tape in the TV/VCR, PLEASE INSERT CASSETTE
also appears on the screen.
● If there is a tape without a record tab in the TV/VCR, PLEASE
REMOVE CASSETTE also appears on the screen. If this happens, insert a different tape.
● If PROGRAM NOTCOMPLETED appears, start again at step 1.
11
Press the POWER button to turn off the TV/VCR power. The
RECORD light will flash slowly. If you forget to turn off the TV/VCR, PLEASE TURN OFF FOR TIMER RECORDING appears on the TV/VCR screen two minutes before a timer recording is scheduled to begin.
• PROGRAM NOT COMPLETED / CLASH may appear on the screen when you finish setting a timer recording. This means that the timer recording you just programmed and another timer recording overlap, and thus the current timer recording will not be carried out.
• To stop a timer recording that is in progress, press the STOP/EJECT but­ton on the TV/VCR. To cancel the recording so that it will not resume when the TV/VCR power is turned off, clear the timer record­ing. Details are on page 35.
Please see page 54 for more Helpful Hints.
Helpful Hints
11
9
10
8
POWER CLEARSTATUS/EXIT
MENU
1 2 3
4 5 6
7 8 9
0
MUTE
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
STOP/
REC/OTR PAUSE/STILL
MEMORY
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
Timer Recording (cont’d) 35
6
Repeat steps 1 - 4 to make sure you have cleared the cor­rect position.
Checking or Clearing Timer Recordings
1
With the TV/VCR on, press the MENU button.
2
Press the PLAY/▲ button or the STOP/▼ button to select VCR PROGRAM, then press the FF/SEARCH/B button.
3
Press the PLAY/▲ button or the STOP/▼ button to select PROGRAM REVIEW, then press the FF/SEARCH/B but­ton. The timer recording information for the program in the low-
est numbered position will appear on the screen. If no timer recordings are programmed, nothing will happen when you select PROGRAM REVIEW and press the FF/SEARCH/B button.
4
Press the FF/SEARCH/B button to display information about the next programmed timer recording. (If you do
not press a button within 10 seconds, information about the next programmed timer recording will appear.) This will continue until all positions have been displayed. Then, the menu will disappear. You can exit the Program Review at any time by pressing the STATUS/EXIT button.
5
To cancel the timer recording displayed, press the CLEAR button. Either the display will disappear or information
about other timer recordings will appear. If you do not press any other buttons, the display will disappear after all timer recordings have been displayed.
2-3
5
1
• With ShowGuard, you don’t have to worry about losing your timer recordings. If the power fails, pro­grammed timer recordings will be restored when the clock is reset. (The clock will reset itself automati­cally if you are using the AUTO CLOCK feature. Details are on pages 14-17. If you are not using the AUTO CLOCK feature, reset the clock manually. Details are on pages 12-13.) The timer recording will not occur only if the timer recording was scheduled to take place during the power failure.
Helpful Hint
4
POWER CLEARSTATUS/EXIT
MENU
1 2 3
4 5 6
7 8 9
0
MUTE
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
STOP/
MEMORY
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
36 Defeat Recording
Follow the steps below to prevent accidental recording.
2
Press the PLAY/▲ button or the STOP/▼ button to select VCR SETUP, then press the FF/SEARCH/B button.
3
Press the PLAY/▲ button or the STOP/▼ button to select DEFEAT RECORDING, then press the FF/SEARCH/B but­ton so that ON appears beside DEFEAT RECORDING.
4
Press the STATUS/EXIT button.
• If you set DEFEAT RECORDING to ON after a timer recording has been set, the timer recording will not occur.
• You can not program a timer recording if DEFEAT RECORDING is set to ON.
• To set DEFEAT RECORDING to OFF, repeat steps 1-2 above. At step 3, press the PLAY/o button or the STOP/p button to select DEFEAT RECORDING, then press the FF/SEARCH/B button so that OFF appears beside DEFEAT RECORDING. Press the STATUS/EXIT button.
Helpful Hints
VCR SETUP
> ONE TIME PLAY [ON]
REPEAT PLAY ON-SCREEN MODE DEFEAT RECORDING [OFF] BLUE BACKGROUND [ON]
SELECT KL CHOOSE B TO END PRESS EXIT
VCR SETUP
ONE TIME PLAY [ON] REPEAT PLAY ON-SCREEN MODE
> DEFEAT RECORDING [ON]
BLUE BACKGROUND [ON]
SELECT KL CHOOSE B TO END PRESS EXIT
5
Now, REC DEFEATED will flash on the screen when you press the REC(ord)/OTR button.
REC DEFEATED
1
Press the MENU button.
> PRIM. SETUP
VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
PRESS B
2-3
1
4
5
POWER CLEARSTATUS/EXIT
MENU
1 2 3
4 5 6
7 8 9
0
MUTE
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
MEMORY
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
STOP/
Repeat Play 37
Follow the steps below to program the TV/VCR to play a tape over and over.
2
Press the PLAY/▲ button or the STOP/▼ button to select VCR SETUP, then press the FF/SEARCH/B button.
3
Press the PLAY/▲ button or the STOP/▼ button to select REPEAT PLAY, then press the FF/SEARCH/B button so that ON appears beside REPEAT PLAY.
4
Press the STATUS/EXIT button. Now, when a tape has fin-
ished playing, the TV/VCR will rewind it and start playback again. (TV programming will appear while the tape is rewinding.)
• The TV/VCR will stay in Repeat Play mode until you set ONE TIME PLAY to ON, even if the TV/VCRis turned off. To set ONE TIME PLAY to ON, follow steps 1-2 above. Then, press the PLAY/o button or the STOP/p button to select ONE TIME PLAY. Press the FF/SEARCH/B button so that ON appears beside ONE TIME PLAY. Then, press the STATUS/EXIT button.
• The real-time counter memory will not function during Repeat Play mode.
Helpful Hints
1
Press the MENU button.
> PRIM. SETUP
VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
PRESS B
VCR SETUP
> ONE TIME PLAY [ON]
REPEAT PLAY ON-SCREEN MODE DEFEAT RECORDING [OFF] BLUE BACKGROUND [ON]
SELECT KL CHOOSE B TO END PRESS EXIT
VCR SETUP
ONE TIME PLAY
> REPEAT PLAY [ON]
ON-SCREEN MODE DEFEAT RECORDING [OFF] BLUE BACKGROUND [ON]
SELECT KL CHOOSE B TO END PRESS EXIT
2-3
1
4
POWER CLEARSTATUS/EXIT
MENU
1 2 3
4 5 6
7 8 9
0
MUTE
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
MEMORY
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
STOP/
38 A-B Repeat Play
• To cancel A-B Repeat Play, set ONE TIME PLAY to ON. To set ONE TIME PLAY to ON, follow steps 2-3 above. Then, press the PLAY/o button or the STOP/p button to select ONE TIME PLAY. Press the FF/SEARCH/B button so that ON appears beside ONE TIME PLAY. Then, press the STA­TUS/EXIT button.
• The end position (B) must be later on the tape than the start position (A).
Helpful Hints
Follow the steps below to program the TV/VCR to play the mate­rial between two specified points (A and B) on a tape over and over again.
1
Insert a tape in the TV/VCR.
3
Press the PLAY/▲ button or the STOP/▼ button to select VCR SETUP, then press the FF/SEARCH/B button.
5
Press the FF/SEARCH/B button repeatedly so that A-B appears beside REPEAT PLAY.
4
Press the PLAY/▲ button or the STOP/▼ button to select REPEAT PLAY.
2
Press the MENU button.
1
Insert a tape in the TV/VCR.
> PRIM. SETUP
VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
PRESS B
VCR SETUP
> ONE TIME PLAY [ON]
REPEAT PLAY ON-SCREEN MODE DEFEAT RECORDING [OFF] BLUE BACKGROUND [ON]
SELECT KL CHOOSE B TO END PRESS EXIT
VCR SETUP
ONE TIME PLAY [ON]
> REPEAT PLAY
ON-SCREEN MODE DEFEAT RECORDING [OFF] BLUE BACKGROUND [ON]
SELECT KL CHOOSE B TO END PRESS EXIT
VCR SETUP
ONE TIME PLAY
> REPEAT PLAY [A-B]
ON-SCREEN MODE DEFEAT RECORDING [OFF] BLUE BACKGROUND [ON]
SELECT KL CHOOSE B TO END PRESS EXIT
5
2
3
4
POWER CLEARSTATUS/EXIT
MENU
1 2 3
4 5 6
7 8 9
0
MUTE
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
MEMORY
CHANNEL
SLEEP/WAKE UP
STOP/
ALT.CH
SPEED
6
Press the STATUS/EXIT button to remove the menu. A-B
REPEAT will appear on the screen. Beneath it, the letter A will flash beside the real-time counter.
.
A-B REPEAT
A 0:12:34
7
Play, fast forward, or rewind the tape to the position at which you want to begin playback. Stop the tape, then press the MEMORY button to set the start position (A).
The flashing A will become a flashing B.
.
A-B REPEAT
B 0:00:00
8
Play or fast forward the tape to the position at which you want playback to end. Stop the tape, then press the MEMORY button to set the end position (B).
● The length of time between the start position (A) and the end
position (B) must be at least three minutes.
9
The TV/VCR will immediately rewind the tape to the start posi­tion (A) and repeat playback to the end position (B) over and over. (TV programming will appear while the tape is rewinding.)
A-B Repeat Play (cont’d) 39
7-8
• The counter cannot be memorized or reset when you are using this feature.
• A-B Repeat Play will be cancelled if you eject the tape or press the REC(ord)/OTR button.
• A-B REPEAT will not appear on the screen at step 6 if a tape is not in the TV/VCR. NO CASSETTE will flash on the screen briefly.
• You cannot rewind or fast forward beyond points A or B when you are using this feature.
• A-B Repeat Play will be retained if you turn off the TV/VCR power.
Helpful Hints
6
POWER CLEARSTATUS/EXIT
MENU
1 2 3
4 5 6
7 8 9
0
MUTE
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
MEMORY
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
STOP/
40 Real-Time Counter Memory
Follow the steps below to reset the real-time counter to zero at a tape location you want to refer to later.
1
Play, fast forward, or rewind a tape to the location that you would like to refer to later. Stop the tape.
2
Press the STATUS/EXIT button. The real-time counter will
appear on the screen.
3
While the counter remains on the screen, press the CLEAR button to reset the real-time counter to zero.
4
While the counter remains on the screen, press the MEM­ORY button so that M appears on the screen. To erase a
real-time counter memory, press the MEMORY button so that the M disappears from the screen.
01:08 PM STOP CH10
SLP 1 : 23 : 45
5
To go to a tape location where the real-time counter was reset to zero, press the REW(ind)/SEARCH/s button or the FF/SEARCH/B button when playback is stopped. When the tape reaches the point at which the counter was set to zero, the tape will stop. Press the PLAY/o but­ton to watch the tape.
• The real-time counter memory will not function during Repeat Play mode or A-B Repeat Play mode. Details are on pages 37-39.
• You may only set one real-time counter memory at a time. If you set the real-time counter to zero at a second location, the previous real­time counter to zero setting will be lost.
Helpful Hints
0 : 00 : 00
M 0 : 00 : 00
2
1,5
4
3
POWER CLEARSTATUS/EXIT
MENU
1 2 3
4 5 6
7 8 9
0
MUTE
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
STOP/
MEMORY
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
Playback Options 41
Forward and Reverse Searching (SP/LP/SLP)
1
During tape playback, press and release the FF/SEARCH/B button or the REW(ind)/SEARCH/{ button. A fast forward or reverse picture search will begin.
2
To return to normal playback, press the PLAY/▲ button.
Super High Speed Searching (LP/SLP)
1
During tape playback, press the FF/SEARCH/B button or the REW(ind)/SEARCH/{ button, then press again. The TV/VCR will now search in super high speed.
2
To return to normal playback, press the PLAY/▲ button.
Viewing a Still Picture
1
During tape playback, press the PAUSE/STILL button. A still pic­ture will appear on the screen. The noise lines will move each time you press the PAUSE/STILL button.
2
To release the still picture and return to normal playback, press the PLAY/▲ button.
• Still mode will automatically switch to Stop mode after five minutes to protect the TV/VCR and the tape from damage.
• SP/LP/SLP means this feature will work with tapes recorded in Standard Play, Long Play, or Super Long Play. For details about tape speed, see page 29.
• LP/SLP means this feature will work with tapes recorded in Long Play and Super Long Play. For details on tape speed, see page 29.
• During forward and reverse search­ing, horizontal noise bars will appear on the TV/VCR screen.
• Tapes recorded in SLP speed will have the clearest picture during for­ward and reverse searching and Still mode.
Helpful Hints
POWER CLEARSTATUS/EXIT
MENU
1 2 3
4 5 6
7 8 9
0
MUTE
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
MEMORY
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
STOP/
42 SmartLock
SmartLock enables parents to prevent their children from watch­ing inappropriate material on TV. SmartLock reads the ratings for programming (except for news and sports programs, unedited movies on premium cable channels, and Emergency Broadcast System signals), then denies access to programming if the program’s rating meets or exceeds the limita­tions you select. The ratings are defined on page 45. To block ratings, follow the steps below.
• If the “Incorrect Access Code...” mes­sage appears after step 3, enter the correct access code.
• Programming may be rated by the Motion Picture Association of America (MPAA) or according to the Television Parental Guidelines. In order to block any inappropriate programming, set your limits in both places (Movie Ratings and Parental Guidelines). You will complete steps 1-7 twice, choosing Movie Ratings at step 5 the first time, then choosing Parental Guidelines at step 5 the second time.
• You can not view tape playback if the rating of the tape is blocked.
• If you enter the access code once, you may change channels without seeing the “CHANNEL XX BLOCKED” message again. If you turn off the TV/VCR power, you will be asked for the access code again when you tune to a blocked channel.
Helpful Hints
1
Press the MENU button.
2
Press the PLAY/▲ button or the STOP/▼ button to select SMARTLOCK. Then, press the FF/SEARCH/B button.
SMARTLOCK
Enter Your Access Code
> SMARTLOCK
REVIEW EXIT PRIM. SETUP VCR PROGRAM VCR SETUP
PRESS B
3
Use the Number buttons to enter your access code.
The default code is 0711. If you have not set up your personal access code, you should use 0711. (To set up your personal access code, see page 44.) The SMARTLOCK menu will appear.
SMARTLOCK
> BLOCK
CHANGE CODE
SELECT KL CHOOSE B TO END PRESS EXIT
_ _ _ _
1
2,4
3
4
Press the PLAY/▲ button or the STOP/▼ button to select BLOCK. Then, press the FF/SEARCH/B button.
SMARTLOCK
Enter Your Access Code
X X X -
POWER CLEARSTATUS/EXIT
MENU
1 2 3
4 5 6
7 8 9
0
MUTE
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
MEMORY
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
STOP/
SmartLock (cont’d) 43
5
Press the PLAY/▲ button or the STOP/▼ button to select Movie Ratings or Parental Guidelines. Then, press the FF/SEARCH/B button.
BLOCK
> Movie Ratings
Parental Guidelines
SELECT KL CHOOSE B TO END PRESS EXIT
6
Press the PLAY/▲ button or the STOP/▼ button to select the rating you want to block. Then, press the FF/SEARCH/B button so that ON appears beside the rat­ing.
For example, if you set PG to ON, you may not view PG pro­gramming because the block is on. Programs with a PG or higher rating will be blocked. A “CHANNEL XX BLOCKED...” message will appear when someone tries to access such programming.
7
Press the STATUS/EXIT button.
●More specific sub-ratings are available for TV-Y7, TV-PG, TV-14,
and TV-MA. (See example below.) When you press the FF/SEARCH/B button to turn on TV-Y7, TV-PG, TV-14 or TV­MA, additional sub-ratings will appear. If you select the rating category, such as TV-PG, and turn it on or off, the specific sub-ratings, such as V for Violence, will turn on or off automatically. You can always turn specific sub-ratings on or off by selecting them individually. However, you may only set a sub-rating to ON if the rating category is set to ON.
●Ratings are defined on page 45.
• If the “CHANNEL XX BLOCKED...” or “PLAYBACK BLOCKED...” mes­sage appears and you want to view this programming, enter your access code. The channel (or tape play­back) will remain blocked until you enter the correct code. If you do not know the code, you will have to select another channel (using the CHANNEL o/p buttons) or press the STOP/p button.
• Ratings will remain blocked even after a power failure.
• You cannot access the menu when the “CHANNEL XX BLOCKED...” or “PLAYBACK BLOCKED...” message appears.
Helpful Hints
7
5-6
TV-PG
> TV-PG [ON]
D [ON] L [ON] S [OFF] V [OFF]
SELECT KL CHOOSE B TO END PRESS EXIT
Example
of specific
sub-ratings
MOVIE RATINGS
>G [OFF]
PG [ON] PG-13 [ON] R [ON] NC-17 [ON] X [ON]
SELECT KL CHOOSE B TO END PRESS EXIT
PARENTAL GUIDELINES
>TV-Y [OFF]
TV-Y7
>
- - - - - - - - - - - - - - - -
TV-G [OFF] TV-PG
>
TV-14 > TV-MA >
SELECT KL CHOOSE B
TO END PRESS EXIT
POWER CLEARSTATUS/EXIT
MENU
1 2 3
4 5 6
7 8 9
0
SLEEP/WAKE UP
MUTE
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
STOP/
REC/OTR PAUSE/STILL
MEMORY
CHANNEL
ALT.CH
SPEED
To change the access code, follow these steps.
44 SmartLock (cont’d)
1
Press the MENU button.
2
Press the PLAY/▲ button or the STOP/▼ button to select SMARTLOCK. Then, press the FF/SEARCH/B button.
SMARTLOCK
Enter Your Access Code
> SMARTLOCK
REVIEW EXIT PRIM. SETUP VCR PROGRAM VCR SETUP
PRESS B
3
Use the Number buttons to enter your old access code.
The default code is 0711. If you have never set up your personal access code, use 0711 now. After you enter the code, the SMARTLOCK menu will appear.
_ _ _ _
SMARTLOCK
Enter Your Access Code
X X X -
SMARTLOCK
BLOCK
> CHANGE CODE
SELECT KL CHOOSE B TO END PRESS EXIT
4
Press the PLAY/▲ button or the STOP/▼ button to select CHANGE CODE. Then, press the FF/SEARCH/B button.
5
Use the Number buttons to enter your desired access code in the New Code space. Then, enter the same code in the Confirm Code space.
Your new access code should be recorded. You will return to the SMARTLOCK menu.
6
Press the STATUS/EXIT button.
1
6
2,4
5 3
• In order to protect the privacy of the access code, an X will appear on the screen instead of the num­ber you enter.
• If a “Wrong Code...” message appears on the screen after you complete step 5, you entered the wrong numbers in the Confirm Code space. Repeat the steps on this page.
• You cannot use the default code after you set up your personal access code.
• If a power failure occurs, the default code, 0711, will be the active access code again.
• If you connect the power cord to an AC outlet that is controlled by a wall switch, your personal access code will be erased every time you turn off the power at the wall switch. The default code will be the active code again.
Helpful Hints
New Code Confirm Code
_ _ _ _ _ _ _ _
POWER CLEARSTATUS/EXIT
MENU
1 2 3
4 5 6
7 8 9
0
MUTE
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
MEMORY
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
STOP/
SmartLock (cont’d) 45
To check the SmartLock settings, follow these steps.
1
Press the MENU button.
2
Press the PLAY/▲ button or the STOP/▼ button to select REVIEW. Then, press the FF/SEARCH/B button so that the SmartLock settings appear.
Ratings that are blocked will appear on the screen. An “X” will appear if a specific sub-rating is blocked, such as V for Violence in the TV-14 category.
3
Press the STATUS/EXIT button.
> REVIEW
EXIT PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION
PRESS B
1
3
2
BLOCKED RATINGS Movie Ratings G PG-13 NC-17 Parental Guidelines
TV-Y7
- - - - - - - - - - - - - - - - - - - -
TV-G
D L S V TV-PG x x TV-14 x x x x TV-MA – x x x
RATING EXPLANATIONS
For Movie Ratings
• G - General Audience
• PG - Parental Guidance suggested.
• PG-13 - Unsuitable for children under 13
• R - Restricted; under 17 requires accompanying parent or adult guardian
• NC-17 - No one under 17 admitted
• X - Mature audience only
For Parental Guidelines
• V - Violence
• S - Sexual situations
• L - Language
• D - Inappropriate dialogue
• FV - Fantasy Violence may frighten children under seven; TV-Y7 category only. Some cartoons may have this rating.
• TV-Y - Appropriate for all children
• TV-Y7 - Appropriate for children seven and older
• TV-G - General Audience
• TV-PG - Parental Guidance suggested.
• TV-14 - Unsuitable for children under 14
• TV-MA - Mature audience only
POWER CLEARSTATUS/EXIT
MENU
1 2 3
4 5 6
7 8 9
0
MUTE
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
STOP/
MEMORY
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
46 Wake Up Timer
1
4
2-3
The Wake Up Timer turns on the TV/VCR automatically at a speci­fied time within the next 24 hours. You may set the TV/VCR to turn on at a TV channel (the channel at which the TV/VCR was set last) or with VCR playback. To set the Wake Up Timer, follow the steps below. Before you begin:
● Make sure the clock is set. If the clock has never been set,
CLOCK MUST BE SET will appear on the screen after you select WAKE UP at step 2. Then the SET CLOCK menu will appear.
● Make sure a tape is in the TV/VCR if you want the TV/VCR to
start tape playback at the specified time.
● Make sure no timer recordings are set for the time at which you
want the TV/VCR power to come on.
1
Press the SLEEP/WAKE UP button.
• To cancel the Wake Up Timer, press the SLEEP/WAKE UP button. Press the PLAY/o button or the STOP/ p button to select WAKE UP. Then, press the REW(ind)/SEARCH/ssbut­ton or the FF/SEARCH/BBbutton to select OFF. Press the STATUS/EXIT button.
Helpful Hint
2
Press the PLAY/oobutton or the STOP/ppbutton to select WAKE UP. Then, press the REW(ind)/SEARCH/ssbutton or the FF/SEARCH/BBbutton to select TV ON or VCR ON.
4
Press the STATUS/EXIT button.
5
Press the POWER button to turn off the TV/VCR. The TV/VCR will turn itself on at the specified time.
TO ADJUST PRESS ss/
BB
–TIMER–
> SLEEP
WAKE UP ON-TIME
OFF
TO ADJUST PRESS ss/
BB
–TIMER–
SLEEP
> WAKE UP
ON-TIME
TV ON
3
Press the PLAY/oobutton or the STOP/ppbutton to select ON-TIME. Then, press the REW(ind)/SEARCH/ssbutton or the FF/SEARCH/BBbutton to select your desired wake up time. Each press of the REW(ind)/SEARCH/ssbutton or the
FF/SEARCH/BBbutton will increase (or decrease) the time by 10 minutes.
TO ADJUST PRESS ss/
BB
–TIMER–
SLEEP WAKE UP
> ON-TIME
12:00 AM
5
POWER CLEARSTATUS/EXIT
MENU
MUTE
MEMORY
CHANNEL
0
ALT.CH
SLEEP/WAKE UP
SPEED
STOP/
1 2 3
4 5 6
7 8 9
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
1
Press the SLEEP/WAKE UP button.
• To cancel the Sleep Timer, press the SLEEP/WAKE UP button. Press the PLAY/o button or the STOP/p button to select SLEEP, then press the REW(ind)/SEARCH/ssbutton or the FF/SEARCH/BBbutton to select OFF. Press the STATUS/EXIT but­ton.
• To see how much time remains before the TV/VCR shuts itself off, press the SLEEP/WAKE UP button once. Press the PLAY/o button or the STOP/p button to select SLEEP if necessary. To remove the display, press the STATUS/EXIT button.
• The Sleep Timer will be cancelled if you make a recording after you set the Sleep Timer.
Helpful Hints
2
Press the PLAY/oobutton or the STOP/ppbutton to select SLEEP. Then press the REW(ind)/SEARCH/s button or the FF/SEARCH/B button to select 30 MIN(utes), 60 MIN(utes), 90 MIN(utes), or 120 MIN(utes). (You can not
set the Sleep Timer during a recording.)
3
Press the STATUS/EXIT button. The TV/VCR will shut itself
off after the specified amount of time. One minute before the TV/VCR shuts itself off, the seconds will count down on the screen. GOOD NIGHT appears on the TV/VCR screen 10 seconds before the TV/VCR shuts itself off.
TO ADJUST PRESS ss/
BB
–TIMER–
> SLEEP
WAKE UP ON-TIME
OFF
TO ADJUST PRESS ss/
BB
–TIMER–
> SLEEP
WAKE UP ON-TIME
30 MIN
Sleep Timer 47
Use the Sleep Timer to program the TV/VCRto shut off in a cer­tain amount of time.
2
3
1
POWER CLEARSTATUS/EXIT
MENU
1 2 3
4 5 6
7 8 9
0
MUTE
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
STOP/
MEMORY
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
When you watch a program that is being broadcast with closed captions, you can access on-screen boxes containing the pro­gram’s dialogue (for example, what a character is saying), dialogue in a foreign language, or information (such as a channel guide, schedule, or announcements). Follow the steps below to select closed captions. Not all TV programs and commercials are broadcast with closed captions. Similarly, all types of closed captions (second language, half-screen text, etc.) are not always broadcast. If closed caption­ing is not broadcast, you cannot receive it. This does not indicate a problem with the TV/VCR. Refer to your area’s TV program listings for the shows offered with closed captions.
1
Press the MENU button.
2
Press the PLAY/▲ button or the STOP/▼ button to select CAPTION.
3
Press the REW(ind)/SEARCH/{ button or the FF/SEARCH/B button to select your desired mode.
The selected closed caption mode will appear beside CAPTION on the screen.
● CAPTION1 displays standard closed captions (what a character
is saying).
● CAPTION2 displays foreign language closed captions (foreign
language words showing what a character is saying).
● TEXT1 and TEXT2 display half-screen text (such as a channel
guide, schedule, or announcement).
● OFF turns closed captions off. Captions will not appear on the
screen.
TO ADJUST PRESS { / B
> CAPTION
REMINDER BRIGHTNESS PICTURE COLOR TINT
CAPTION1
Example: CAPTION1 Menu Screen
48 Closed Caption
> PRIM. SETUP
VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
PRESS B
TO ADJUST PRESS { / B
> CAPTION
REMINDER BRIGHTNESS PICTURE COLOR TINT
OFF
1
2
3
• When you change channels, the closed captions may be delayed for a few seconds.
• When you adjust the volume or mute the volume, closed captions may be delayed for a few seconds. Details are on page 51.
Helpful Hints
POWER CLEARSTATUS/EXIT
MENU
1 2 3
4 5 6
7 8 9
0
MUTE
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
MEMORY
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
STOP/
Closed Caption (cont’d) 49
• You cannot view closed captions dur­ing recording or tape playback if COUNTER ONLY is set to ON. Details are on page 26.
• If STATUS is set to ON, closed cap­tions will be interrupted briefly when you insert or remove a tape. Details are on page 26.
• Abbreviations, symbols, and other grammatical shortcuts are often used in order to keep pace with the on­screen action. This does not indicate a problem with the TV/VCR.
• To cancel closed captions, follow steps 1-2 on page 48. At step 3, press the REW(ind)/SEARCH/{ but­ton or the FF/SEARCH/B button to select OFF. Press the STATUS/EXIT button.
Helpful Hints
HELLOHELLO
WORLD WEATHERWORLD WEATHER
NYLNYL LOSLOS LONDONLONDON
CLOUDCLOUD RAINRAIN CLOUDCLOUD
5 C 5 C 8 C 8 C 7 C 7 C
23:0023:00 20:0020:00 4:00 4:00
Standard Closed Captions
Half-screen text
4
Press the STATUS/EXIT button. The type of closed captions
you selected at step 3 will appear on the screen.
4
POWER CLEARSTATUS/EXIT
MENU
1 2 3
4 5 6
7 8 9
0
MUTE
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
STOP/
MEMORY
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
2
Press the PLAY/oobutton or the STOP/ppbutton to select VCR SETUP, then press the FF/SEARCH/BBbutton.
50 Blue Background
If you want the TV screen to be solid blue when a weak signal is received, set BLUE BACKGROUND to ON. The screen will be blue and the sound will be muted. Or, if you want to receive the weak signal, set BLUE BACKGROUND to OFF. When you select a channel that is receiving a weak signal, you will see and hear the static in the TV programming. To set BLUE BACKGROUND to ON or OFF, follow the steps below.
1
Press the MENU button.
> PRIM. SETUP
VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
PRESS B
VCR SETUP
> ONE TIME PLAY [ON]
REPEAT PLAY ON-SCREEN MODE DEFEAT RECORDING [OFF] BLUE BACKGROUND [ON]
SELECT KL CHOOSE B TO END PRESS EXIT
VCR SETUP
ONE TIME PLAY [ON] REPEAT PLAY ON-SCREEN MODE DEFEAT RECORDING [OFF]
> BLUE BACKGROUND [ON]
SELECT KL CHOOSE B TO END PRESS EXIT
3
Press the PLAY/oobutton or the STOP/ppbutton to select BLUE BACKGROUND. Then, press the FF/SEARCH/BBbut­ton repeatedly so that OFF (or ON) appears beside BLUE BACKGROUND.
4
Press the STATUS/EXIT button.
1
4
2-3
• A blue screen may appear briefly between channel changes if BLUE BACKGROUND is set to ON. To avoid having the brief blue screen, set BLUE BACKGROUND to OFF.
Helpful Hint
POWER CLEARSTATUS/EXIT
MENU
1 2 3
4 5 6
7 8 9
0
MUTE
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
MEMORY
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
STOP/
Usually, the volume bar appears when you press the VOLUME ▲/▼ buttons. If you do not need it, set the VOLUME BAR to OFF. For example, when you watch a program that is being broad­cast with closed captions, you may choose to set the VOLUME BAR to OFF so the captions can remain on the screen. The cap­tions will remain on the screen even when you press the VOL­UME ▲/▼ buttons or the MUTE button.
Volume Bar 51
3
Press the PLAY/▲ button or the STOP/▼ button to select VOLUME BAR, then press the FF/SEARCH/B button.
Each press of the FF/SEARCH/B button will turn the VOLUME BAR ON or OFF.
4
Press the STATUS/EXIT button.
1
Press the MENU button.
2
Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP. Then, press the FF/SEARCH/B button.
PRIMARY SETUP
> SELECT LANGUAGE
AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [OFF] SET CLOCK
SELECT KL CHOOSE B TO END PRESS EXIT
> PRIM. SETUP
VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
PRESS B
2-3
1
4
PRIMARY SETUP
SELECT LANGUAGE AUTO PROGRAMMING CH MEMORY REVIEW
> VOLUME BAR [ON]
SET CLOCK
SELECT KL CHOOSE B TO END PRESS EXIT
POWER CLEARSTATUS/EXIT
MENU
1 2 3
4 5 6
7 8 9
0
MUTE
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
MEMORY
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
STOP/
52 Automatic Operation Features
The following playback features will always operate.
Automatic Playback
When you put a tape in the TV/VCR, the power will come on automatically. If the tape’s record tab is missing, playback will begin. If a timer recording is set, the power will not come on automatically when you insert a tape with the record tab intact. If a timer recording is set and the TV/VCR power is off, the TV/VCR will eject the tape if the record tab is missing.
Automatic Rewind, Eject, Off
When a tape is played, fast forwarded, or recorded to its end, the TV/VCR will rewind the tape, stop, turn itself off, and eject the tape. If a real-time counter memory is set, the TV/VCR may only rewind the tape to the point at which the real-time counter is set to zero. The TV/VCR will not turn itself off or eject the tape.
Memory Rewind, Power Off
When the POWER button is pressed while the TV/VCR is rewind­ing a tape, REW → POWER OFF will appear on the screen. The TV/VCR will turn itself off when the tape has finished rewinding. If a real-time counter memory is set, the TV/VCR may only rewind the tape to the point at which the counter was set to zero, then turn itself off.
Tape Eject
A tape can be ejected with the TV/VCR power on or off (but the TV/VCR must be plugged in). If a timer recording is programmed, a tape can not be ejected when the power is off. Turn on the TV/VCR power, then eject the tape. Be sure to insert a tape and turn off the TV/VCR power for the timer recording.
Automatic Tracking Adjustment
The TV/VCR automatically adjusts the tracking to give you the best possible picture quality. With some recordings, however, you may get a better picture using the manual tracking controls (see below).
Manual Tracking
To adjust the tracking manually, press the CHANNEL o/p but­tons on the TV/VCR. Tracking returns to Automatic Tracking Adjustment when a tape is inserted or when the STOP/p button is pressed.
Before
Tracking
Adjustment
After
Tracking
Adjustment
General
CRT: 13-inch in line gun (CC13B1MG)
19-inch in line gun (CC19B1MG) Television system: NTSC-M Closed caption system: Section 15.119, FCC
(Federal Communications Commission) Standard Video Heads: Two heads Tape width: 1/2 inch (12.65 mm) Tape speed
SP: 33.35 mm/sec. LP: 16.67 mm/sec.
SLP: 11.12 mm/sec. Operating Temperature: 41˚F (5˚C) to 104˚F (40˚C) Relative Humidity: 10% to 75% Power requirement: AC 120V, 60Hz Power consumption: 65W (CC13B1MG)
90W (CC19B1MG) Sound output: 1W Dimensions:
15-3/4" (H) x 15-3/16" (W) x 14-13/16" (D)
(CC13B1MG)
400mm x 386mm x 377mm 19-11/16" (H) x 19-7/16" (W) x 18-5/16" (D)
(
CC19B1MG
)
500mm x 494mm x 465mm Weight: 24.3 lbs (11.0 kg) (CC13B1MG) Weight: 44.1 lbs (20.0 kg) (CC19B1MG)
Tuner Broadcast Channels
VHF 2-13, UHF 14-69
Cable TV Channels
1-125
Terminals
Antenna In: VHF/UHF 75 ohms unbalanced Video In: RCA connector Audio In: RCA connector Earphone: 3.5 mm CES
Electrical Specifications
Video input level: 0.5~2.0Vp-p Audio input level: -10dBv Video S/N ratio
SP: More than 42dBµ
Audio S/N ratio
SP: More than 38dB
Designs and specifications are subject to change without notice and without our legal obligation.
Specifications 53
54 Helpful Hints
Location
For safe operation and satisfactory performance of your TV/VCR, remember the following:
• Shield it from direct sunlight and keep it away from sources of intense heat.
• Avoid dusty or humid places.
• Avoid places with insufficient ventilation. Do not block the ventilation openings at the top and bottom of the TV/VCR. Do not place the TV/VCR on a carpet, as this will block the ventilation openings.
• Avoid locations subject to strong vibrations.
• Do not place the TV/VCR near strong magnetic fields.
• Do not move the TV/VCR from a cold place to a hot place, or vice versa.
Electrical Shock and Fire Hazards
• Do not handle the power cord with wet hands.
• Do not pull the power cord when disconnecting the TV/VCR from the AC (alternating current) wall out­let. Grasp it by the plug.
• If water is spilled on the TV/VCR, unplug the power cord immediately and take the TV/VCR to an autho­rized service center.
• Do not put your fingers or objects into the TV/VCR cassette compartment.
• Do not place anything on top of the TV/VCR.
Dew Warning (Moisture Condensation)
• Moisture may condense inside the unit when it is moved from a cold place to a warm place, after heating a cold room, or when the humidity is high. There is no warning that moisture has accumulated in your TV/VCR. If you try to play a tape in a TV/VCR in which moisture has accumulated, the tape and the TV/VCR could be damaged. If you think moisture may have accumulated inside the TV/VCR, keep the TV/VCR power on (but do not play a tape) for at least two hours. This will allow the TV/VCR to dry.
TV/VCR will not perform a timer recording.
• Make sure the recording start and stop times are set correctly. Details are on pages 32-35. Midnight is 12 a.m. Noon is 12 p.m.
• Make sure the TV/VCR power is off.
• Make sure the clock is set. Details are on pages 12-17.
• Make sure there is a tape in the TV/VCR. The tape must have a record tab.
• With ShowGuard, you don’t have to worry about losing your timer recordings. If the power fails, pro­grammed timer recordings will be restored when the clock is reset. (The clock will reset itself automati­cally if you are using the AUTO CLOCK feature. Details are on pages 14-17. If you are not using the AUTO CLOCK feature, reset the clock manually. Details are on pages 12-13.) The timer recording will not occur only if the timer recording was scheduled to take place during the power failure.
• Make sure DEFEAT RECORDING is set to OFF. Details are on page 36.
TV/VCR will not record.
• Make sure the tape has a record tab. Details are on page five.
• Make sure DEFEAT RECORDING is set to OFF. Details are on page 36.
• Plug the power cord into an active AC outlet. Details are on page seven.
• Check your hookups. Details are on pages six-seven.
• Set up the channels. Details are on page 10.
TV/VCR has no power.
• Make sure the power plug is completely connected to an AC (alternating current) outlet.
If you are having problems with your product, check this list of problems and possible solutions before requesting service. You may be able to solve the problem yourself. If you need to call a customer service representative, please know the model number and serial number of your product before you call. This information is displayed on the back of the product. Also, please take a moment to identify the problem you are having, and be prepared to explain this to the representa­tive. If you believe the representative will need to help you with operations, please stay near the product. Our representatives will be happy to assist you.
Helpful Hints (cont’d) 55
The remote control is not available, or the remote control will not access the pop up menu.
• Use the buttons on the front panel of the TV/VCR to access the pop up menu. You can not enter numbers (for example, to program a timer recording) using the front panel buttons. Details are on page 20.
TV/VCR power shuts off after 15 minutes.
• To save energy, the TV/VCR will shut itself off after 15 minutes when it is on a channel that is not receiving a broadcast signal (for example, a station that has gone off the air for the night). This is normal.
Channel reception is poor.
• Check connections, then set up the channels again. Details are on page 10.
TV/VCR does not have a picture.
• Adjust the antenna. Details are on page six.
• Adjust the TV/VCR picture controls. Details are on pages 24-25.
TV/VCR has poor sound or no sound.
• Adjust the volume.
• Press the MUTE button to restore the volume.
Tape playback is poor or tape is destroyed.
• Adjust the tracking. Details are on page 52.
• If moisture has accumulated in your TV/VCR, keep the power on for at least two hours, but do not try to play a tape. Details are on page 54.
TV/VCR does not display closed captions.
• Make sure COUNTER ONLY is set to OFF. Details are on page 26.
• Make sure closed captioning is available for the program. Refer to the TV listings in your local newspaper.
Remote control does not operate TV/VCR.
• Aim the remote control directly at the TV/VCR’s remote sensor. Details are on pages five and 20.
• Remove all obstacles between the remote control and the TV/VCR.
• Inspect and replace the batteries in the remote control. Details are on page five.
Number buttons won’t work for channels above 69.
• Enter channel numbers as a two-digit number. If you want to select channels 100 and above, enter channel numbers as a three-digit number. Details are on page 22.
• If you are using an antenna, only channels 2-69 will be available.
A tape can’t be inserted into the TV/VCR.
• Insert the tape window side up, with the record tab facing you.
• Make sure a tape isn’t already in the TV/VCR by pressing the STOP/EJECT button on the TV/VCR.
• Gently push on the center of the tape. Never force a tape into the TV/VCR.
• If a timer recording is set and the TV/VCR power is off, the TV/VCR will eject the tape if the record tab is missing.
A tape can’t be removed from the TV/VCR.
• Make sure the power plug is completely connected to an AC (alternating current) outlet.
• If a timer recording is programmed, turn on the TV/VCR power, then eject the tape. Be sure to insert a tape and turn off the TV/VCR power for the timer recording.
TV/VCR ejects the tape when you try to start a recording.
• Make sure the tape has a record tab. Details are on page five.
The cylinder rotates when tape playback is stopped.
• To enable the quick play mechanism, the cylinder will rotate for about five minutes. This is normal. The quick play mechanism switches the tape mechanism from Stop to Play in just one second.
AUDIO In Jack: jack located on the front of the TV/VCR which is used to record audio from another source.
Automatic Channel Setup:
process in which the TV/VCR scans all available channels and places the ones you receive in its memory. Then, when you push the CHANNEL o/p buttons, you only scan through channels you receive.
Bands:
settings that allow you to tune channels.
• Antenna – VHF (very high frequency; channels
2-13) and UHF (ultra high frequency; channels 14-69).
• Cable – all standard channels can be received without a Cable
Box.
Brightness:
adjusting increases or decreases the brightness of
the color on the screen.
Color
: adjusting pales or brightens the TV/VCR color.
Dubbing:
copying a tape using a VCR.
HQ:
high quality; a feature in the TV/VCR circuitry which pro-
vides enhanced picture detail.
Line Input:
The channel to which you set your TV/VCR during
dubbing. The line input channel is always channel 00 (A/V IN).
Mode:
a TV/VCR operation.
OTR:
One-Touch Recording; a timed recording that starts immediately and records for 30 minutes to eight hours, whichev­er you specify.
Picture:
adjusting increases or decreases the contrast of the pic-
ture on the screen.
Sharpness:
adjusting softens or clarifies the picture on the screen.
Tape Speeds:
how fast the tape travels during playback or
recording.
• SP (standard play) – fastest tape speed (recording time for a
T120 tape is approximately two hours); best picture quality.
• LP (long play) – average tape speed; playback only.
• SLP (super long play) – slowest tape speed (recording time for
a T120 tape is approximately six hours).
Tint
: adjusting changes the tints of the picture on the TV/VCR
from purple to green.
VIDEO In Jack:
jack located on the front of the TV/VCR which
is used to record video from another source.
56 Glossary
Limited Warranty 57
WHO IS COVERED?
You must have proof of purchase to receive warranty service. A sales receipt or other document showing that you purchased the product is considered proof of purchase.
WHAT IS COVERED?
Warranty coverage begins the day you buy your product. For 90 days thereafter, all parts will be repaired or replaced, and labor is free. From 90 days to one year from the day of purchase, all parts will be repaired or replaced, but you pay for all labor charges. From one to two years from the day of pur- chase, you pay for the replacement or repair of all parts except the picture tube, and for all labor charges. After two years from the day of purchase, you pay for the replacement or repair of all parts, and for all labor charges.
All parts, including repaired and replaced parts, are covered only for the original warranty period. When the warranty on the product expires, the warranty on all replaced and repaired parts also expires.
WHAT IS EXCLUDED?
Your warranty does not cover:
• labor charges for installation or setup of the prod­uct, adjustment of customer controls on the prod­uct, and installation or repair of antenna systems outside of the product.
• product repair and/or part replacement because of misuse, accident, unauthorized repair or other cause not within the control of Philips Consumer Electronics Company.
• reception problems caused by signal conditions or cable or antenna systems outside the unit.
• a product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufac­tured, approved and/or authorized, or repair of products damaged by these modifications.
• incidental or consequential damages resulting from the product. (Some states do not allow the exclu­sion of incidental or consequential damages, so the above exclusion may not apply to you. This includes, but is not limited to, prerecorded materi­al, whether copyrighted or not copyrighted.)
• damage caused by the use of non-VHS tapes or tapes that have not been tested and labeled for use in two, four, six, and eight hour VHS recorders.
• a product that is used for commercial or institu­tional purposes.
WHERE IS SERVICE AVAILABLE?
Warranty service is available in all countries where the product is officially distributed by Philips Consumer Electronics Company. In countries where Philips Consumer Electronics Company does not dis-
tribute the product, the local Philips service organiza­tion will attempt to provide service (although there may be a delay if the appropriate spare parts and technical manual(s) are not readily available).
MAKE SURE YOU KEEP...
Please keep your sales receipt or other document showing proof of purchase. Attach it to this owner’s manual and keep both nearby. Also keep the original box and packing material in case you need to return your product.
BEFORE REQUESTING SERVICE...
Please check your owner’s manual before requesting service. Adjustments of the controls discussed there may save you a service call.
TO GET WARRANTY SERVICE IN U.S.A., PUER­TO RICO OR U.S. VIRGIN ISLANDS...
Take the product to a Philips factory service center (see enclosed list) or authorized service center for repair. When the product has been repaired, you must pick up the unit at the center. Centers may keep defective parts.
(In U.S.A., Puerto Rico and U.S. Virgin Islands, all implied warranties, including implied warranties of merchantability and fitness for a particular purpose, are limited in duration to the duration of this express warranty. But, because some states do not allow limi­tations on how long an implied warranty may last, this limitation may not apply to you.)
TO GET WARRANTY SERVICE IN CANADA...
Please contact Philips at:
1-800-661-6162 (French Speaking) 1-800-363-7278 (English Speaking)
(In Canada, this warranty is given in lieu of all other warranties. No other warranties are expressed or implied, including any implied warranties of mer­chantability or fitness for a particular purpose. Philips is not liable under any circumstances for any direct, indirect, special, incidental or consequential damages, howsoever incurred, even if notified of the possibility of such damages.)
REMEMBER...
Please record below the model and serial numbers found on the product. Also, please fill out and mail your warranty registration card promptly. It will be easier for us to notify you if necessary.
MODEL # __________________________________ SERIAL # __________________________________
This warranty gives you specific legal rights. You may have other rights which vary from state to state.
TV/VCR COMBINATION
90 Days Free Labor/One Year Free Parts Exchange (Two Years Free Exchange on Color Picture Tube)
This product must be carried in for repair.
Philips Service Solutions Group, P.O. Box 2976, Longview, Texas 75606, (903) 242-4800
EL4963E005 / MAC 6108/ 12-98
a-b repeat play . . . . . . . . .38-39
accessories . . . . . . . . . . . . . . .60
ant(enna) jack . . . . . . . . . . .6, 21
audio in jack . . . . . . . . .7, 20, 31
automatic
playback . . . . . . . . . . . . . . .52
rewind . . . . . . . . . . . . . . . .52
batteries . . . . . . . . . . . . . . . . . .5
blue background . . . . . . . . . . .50
brightness, adjusting . . . . .24-25
channel
above 100 . . . . . . . . . . . . .22
adding . . . . . . . . . . . . . . . .11
buttons . . . . . . . . . .20, 23, 52
deleting . . . . . . . . . . . . . . .11
reviewing . . . . . . . . . . . . . .11
setup . . . . . . . . . . . . . . . . .10
clear button . . . . . . . . . . . . . .22
clock . . . . . . . . . . . . . . . . .12-17
closed caption system . . . .48-49
color, adjusting . . . . . . . . .24-25
connections . . . . . . . . . . .6-7, 31
contents, table of . . . . . . . . . . .4
controls
remote . . . . . . . . . . . . .22-23
tv/vcr . . . . . . . . . . . . . . . . .20
counter only mode . . . . . . . . .26
daylight-savings time . . . . . . . .18
defeat recording . . . . . . . . . . .36
duplication . . . . . . . . . . . . . . .31
earphone jack . . . . . . . . . . . . .20
fast forward search . . . . . . . . .41
ff/search/B button . . . . . .23, 41
f.fwd button . . . . . . . . . . . . . .20
front panel . . . . . . . . . . . . . . .20
glossary . . . . . . . . . . . . . . . . .56
helpful hints . . . . . . . . . . . .54-55
hookups . . . . . . . . . . . . .6-7, 31
language selection . . . . . . . . . . .9
line input mode . . . . . .10, 31, 56
long play . . . . . . . . . . . . . .29, 56
lp . . . . . . . . . . . . . . . . . .29, 56
memory
button . . . . . . . . . . .23, 38-40
real-time counter . . . . . . . .40
rewind, power off . . . . . . .52
menu
button . . . . . . . . . . . . . . . .22
front panel button access . .20
mute button . . . . . . . . . . . . . .23
number buttons . . . . . . . . . . .22
one-touch recording . . . . . . . .30
pause/still button . . . . . . .23, 41
picture, adjusting . . . . . . . .24-25
play button . . . . . . . . . . . .20, 23
playback options . . . . . . . . . . .41
playing . . . . . . . . . . . . . . . . . .28
power
button . . . . . . . . . . . . .20, 22
cord . . . . . . . . . . . . . . . .7, 21
real-time counter memory . . .40
rear panel . . . . . . . . . . . . . . . .21
rec/otr button . . . . . . . . .20, 22
record light . . . . . . . . . . . . . .20
recording . . . . . . . . . . . . . . . .29
recording prevention . . . . . . . .5
reminder . . . . . . . . . . . . . . . .27
remote
control
buttons . . . . . . . . . .22-23
using . . . . . . . . . . . . . . . .5
sensor . . . . . . . . . . . . . . . .20
repeat play . . . . . . . . . . . . . . .37
rerecording . . . . . . . . . . . . . .31
rew(ind) button . . . . . . . . . . .20
rew(ind)/search/{ button 23, 41
rewinding . . . . . . . . . . . . . . . .41
safety precautions . . . . . . . . . .3
searching . . . . . . . . . . . . . . . .41
sensor (remote) . . . . . . . . . . .20
sharpness, adjusting . . . . . .24-25
showguard . . . . . . . . .32, 35, 54
sleep timer . . . . . . . . . . . . . . .47
slp . . . . . . . . . . . . . . . . . .29, 56
smartclock . . . . . . . . . . . . .14-17
smartlock . . . . . . . . . . . . .42-45
sp . . . . . . . . . . . . . . . . . .29, 56
specifications . . . . . . . . . . . . .53
sqpb . . . . . . . . . . . . . . . . . . . .28
standard play . . . . . . . . . .29, 56
status display . . . . . . . . . . . . .26
status/exit button . . . . . . .22, 26
still picture . . . . . . . . . . . . . . .41
stop/p button . . . . . . . . . . . .22
stop/eject button . . . . . . . . . .20
super high speed searching . . .41
super long play . . . . . . . . .29, 56
table of contents . . . . . . . . . . .4
tape
duplication . . . . . . . . . . . . .31
speed . . . . . . . . . . . . . .29, 56
time
setting . . . . . . . . . . . . . .12-17
zone . . . . . . . . . . . . . . . . . .19
timer recording
cancelling . . . . . . . . . . . . . .35
reviewing . . . . . . . . . . . . . .35
setting . . . . . . . . . . . . . .32-34
tint, adjusting . . . . . . . . . . .24-25
tracking . . . . . . . . . . . . . . . . .52
video in jack . . . . . . . . .7, 20, 31
volume bar . . . . . . . . . . . . . . .51
wake up timer . . . . . . . . . . . .46
warranty . . . . . . . . . . . . . . . . .57
58 Index
IB8204E001
Printed In Malaysia
0EMN01666 / T5114UQ * * * * *
SUPPLIED ACCESSORIES
OPTIONAL ACCESSORIES
The following items are supplied with your TV/VCR; they
are provided to help you use or set up your TV/VCR.
The following additional items are not provided with your TV/VCR, but they are designed for use with your new TV/VCR. To order these optional accessories, contact us at:
Philips Parts & Accessories Marketing Department
401 East Old Andrew Johnson Highway
P.O. Box 555
Jefferson City, TN 37760
1-800-851-8885.
VHS Cassette Rewinder
#M61117
Three Cassette Storage Cases (plastic)
Fits VHS and Beta cassettes
#M61104
Six High-grade, VHS, T-120 Cassettes
#MHG1206
Monaural Audio and Video Cables (6 feet)
Color-coded for easy connection
#M61103
As an ENERGY STAR®Partner, Philips Consumer Electronics Company has determined that this product meets the E
NERGY STAR
®
guidelines for energy efficiency.
E
NERGY STAR
®
is a U.S. registered mark.
This owner’s manual is made of recycled paper.
Remote Control 4835 218 37278
Two AA Batteries 4835 138 17012
POWER CLEARSTATUS/EXIT
MENU
1 2 3
VOLUME
MUTE
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
STOP/
7 8 9
4 5 6
0
MEMORY
CHANNEL
ALT.CH
SLEEP/MAKE UP
SPEED
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use