Magnavox CC13C1MG, CC19C1MG User Manual

TVCR

Color TV with built-in VCR

Owner’s Manual

CC13C1MG CC19C1MG

Once your purchase is registered, you’re eligible to receive all the privileges of owning this product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits.

MAC5097

Return your Warranty Registration Card today to

ensure you receive all the

benefits

you’re entitled to.

Warranty Verification

Registering your product within 10 days confirms your right to maximum protection under the terms and conditions of your warranty.

Owner Confirmation

Your completed Warranty Registration Card serves as verification of ownership in the event of product theft or loss.

Model Registration

Returning your Warranty Registration Card right away guarantees you’ll receive all the information and special offers which you qualify for as the owner of your model.

Congratulations on your purchase, and welcome to the “family!”

Dear Magnavox product owner:

Thank you for your confidence in this product. You’ve selected one of the best-built, best-backed products available today. And we’ll do everything in our power to keep you happy with your purchase for many years to come. As a member of the Magnavox “family,” you’re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry. What’s more, your purchase guarantees you’ll receive all the information and special offers for which you qualify, plus easy access to accessories from our convenient home shopping network. And most importantly, you can count on our uncompromising commitment to your total satisfaction. All of this is our way of saying welcome - and thanks for investing in a Magnavox product.

P.S. Remember, to get the most from your product,

you must return your Warranty Registration Card within 10 days. So please mail it to us right now!

Hurry!

Know these

safetysymbols

This “bolt of lightning”

indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering.

The “exclamation point” calls attention to features

for which you should read the enclosed literature closely to prevent operating and maintenance problems.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.

ATTENTION: Pour éviter les choc électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu’au fond.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

For Customer Use

Below, enter your product’s model number and serial number, which are located on the rear of the cabinet. Keep this information for future reference.

Model No. ______________________________________ Serial No. ____________________________

Introduction 3

Features

• A-B Repeat Play

• Automatic Channel Setup

• Automatic Head Cleaner

• Automatic Tracking Adjustment

• Blue Background

• Closed Caption

• Daylight-Savings Time

• English or Spanish displays

• High Quality (HQ) System

• One-Touch Recording

• Real-Time Counter

• Remote Control or Front Panel menu access

• Repeat Play

• ShowGuard

- Indefinite Timer

Recording memory

• Sleep Timer

• SmartClock

• SmartLock

• Special Effects: Forward and Reverse Searching; Still

• S-VHS Quasi Play Back (SQPB)

• Timer Recording

• Wake Up Timer

Safety Precautions

Warning: To prevent fire or shock hazard, do not expose this equipment to rain or moisture. Federal Communications Commission (FCC) Warning: Any unauthorized changes or modifications to this equipment void the user’s authority to operate it. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

Philips Consumer Electronics recommends you use only video cassette tapes that have the mark. Other tapes may cause poor picture quality and excessive deposits on the video heads that the warranty may not cover if damage occurs. This TV/VCR has a High Quality (HQ) system and is compatible with existing Video Home System (VHS) equipment. Note to the Cable TV System Installer: This reminder calls the Cable TV system installer’s attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper grounding – in particular, specifying that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as possible.

Declaration of Conformity

Model Numbers: CC13C1MG and CC19C1MG Trade Name: Magnavox Responsible Party: Philips Consumer Electronics

P.O. Box 14810 Knoxville, TN 37914-1810 (865) 521-4316

Welcome to your TV/VCR owner’s manual.

This manual describes two models: CC13C1MG and CC19C1MG. The models may look different, but they operate exactly the same. The CC13C1MG is illustrated in this manual. The features described in this manual apply to all models unless otherwise specified.

As an ENERGY STAR®Partner, Philips Consumer Electronics has determined that this product meets the ENERGY STAR®guidelines for energy efficiency. E

NERGY STAR

is a U.S. registered mark. Using products with the ENERGY STAR®label can save energy. Saving energy reduces air pollution and

lowers utility bills.

SmartClock

4 Table of Contents

Setting Up Your TV/VCR

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Before Using the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Hooking Up the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-7

Turning On the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Language Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Automatic Channel Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-11

Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-17

Daylight-Savings Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Time Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Description of Controls

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22-23

Adjusting the Picture Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-25

On-Screen Status Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Reminder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Basic Operations

Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Recording Options

One-Touch Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Rerecording (Tape Duplication) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32-35

Defeat Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Playing Options

Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

A-B Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38-39

Real-Time Counter Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Playback Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Additional Features

SmartLock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42-45

Blue Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Wake Up Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Volume Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Closed Caption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50-51

Automatic Operation Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Information You May Need

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Helpful Hints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54-55

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

Before Using the TV/VCR 5

Using the Remote Control

● Point the remote control at the TV/VCR’s remote sensor.

● Do not put objects between the remote control and the

TV/VCR.

TV/VCR Maintenance

● In this TV/VCR, use only tapes with the mark.

● Remove any light adhesive stick-on notes from the video cas-

sette tape before putting the tape in the TV/VCR. Removable labels can jam the TV/VCR.

● The TV/VCR requires periodic maintenance to maintain its

excellent performance. This TV/VCR has an automatic head cleaning system. However, the video heads will eventually require cleaning or replacement. Only an authorized service center should perform this service.

Video cassette tapes have record tabs to ensure you do not erase recordings accidentally.

To prevent accidental recording, break off the tab with a screwdriver.

To record again, cover the hole with cellophane tape.

Recording Prevention

Battery Safety

● Battery Usage CAUTION - To prevent battery leakage that

may result in bodily injury or damage to the unit: Install ALL batteries correctly, with the + and - markings on the battery aligned as indicated on the unit; Do not mix batteries, for example, old with new or carbon with alkaline; and Remove batteries when the unit will not be used for a long time.

Putting Batteries in the Remote Control

Remove the battery compartment lid on the bottom of the

remote control by pressing the tab, then lifting the lid.

Place two AA batteries inside the battery compartment

with their +and –ends aligned as indicated.

Replace the battery compartment lid.

1 2 3

• Your new product, its packaging, and this manual contain materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount that needs to be properly disposed. Your product uses batteries that should not be thrown away when depleted but should be disposed of as small chemical waste. Please find out about the local regulations on disposal of your old product, batteries, manual, and packaging when you replace existing equipment.

Helpful Hints

6 Hooking Up the TV/VCR

ANT.

Hooking Up Your TV/VCR With a Cable Signal or Outdoor Antenna

ANT.

OUT

ANT.

Connect an RF coaxial cable (75ohm, not supplied) to the OUT Jack on the Cable Box and to the ANT(enna) Jack on the TV/VCR.

Connect a Cable signal or an antenna to the ANT(enna) Jack.

Hooking Up Your TV/VCR With a Cable Box

To view any channel, set the TV/VCR to the Cable Box output channel (channel 03 or 04). Then, select channels at the Cable Box.

Hook up your TV/VCR using one of the connections shown.

ANT.

Rod Antenna

(not supplied)

Hooking Up Your TV/VCR With an Indoor Antenna

To install a rod antenna (not supplied), push the stem of the antenna into the antenna hole on the top of the TV/VCR. Connect the antenna wire to the ANT(enna) Jack on the back of the TV/VCR as shown. Extend the antenna and adjust its length, direction, and angle for the clearest picture.

Connect the Cable signal to the IN Jack on the Cable Box.

RF coaxial cable

(not supplied)

CC13C1MG

Hooking Up the TV/VCR (cont’d) 7

AUDIOVIDEO

STOP EJECT

REW PLAY F.FWD REC

OTR

CHANNEL

VOLUME

POWER

EARPHONE

OUT

VIDEO

OUT

3CH

4CH

AUDIO

ANT.

OUT

VIDEO

OUT

3CH 4CH

AUDIO

ANT.

VIDEOAUDIO

• Before connecting an antenna or cable signal to the ANT(enna) Jack, make sure the pin is not bent. If the pin is bent, straighten it as illustrated, then connect the antenna or cable signal to the ANT(enna) Jack.

• A rod antenna (not supplied) is available from Philips Service Solutions Group. The part number is 4835 303

37006. To order, call 1-800-851-8885. (This antenna will fit the CC13C1MG only.)

• Audio and video cables are not supplied.

Helpful Hints

Crooked Pin

Straight Pin

Bent pin

Plug

Cable

Hooking Up Your TV/VCR to Another Video Source (VCR or Camcorder)

You may need this connection if you want to copy tapes or view tapes that you are playing on the VCR or camcorder. Select channel 00 (A/V IN) at the TV/VCR when viewing tapes that are playing on the VCR or camcorder. Details are on page 31.

AUDIO/VIDEO In Jacks on front of TV/VCR

AUDIO/VIDEO OUT Jacks on VCR

Connect an Audio cable to the AUDIO OUT Jack on the VCR and to the AUDIO In Jack on the front of the TV/VCR.

Connect a Video cable to the VIDEO OUT Jack on the VCR and to the VIDEO In Jack on the front of the TV/VCR.

When all other connections are complete, plug in the TV/VCR’s power cord.

Before you turn on the TV/VCR, go to page eight.

CC13C1MG

8 Turning On the TV/VCR

Before you turn on the TV/VCR, make sure batteries are in the remote control and you have connected the TV/VCR correctly. The instructions on this page work only when you turn on the TV/VCR for the first time.

Press the POWER button. The TV/VCR will come on and the

screen shown below will appear.

Press the PLAY/K button or the STOP/L button to select English or Spanish on-screen displays and menus.

Press the MENU button. The screen shown below will appear.

Press the F.FWD/B button to begin automatic channel setup. The TV/VCR will memorize all available channels. When

channels are set, CHANNELS ARE SET will appear on the screen briefly. Then the TV/VCR will go to the lowest available channel. If you try to set up channels when there is no antenna or cable connected to the TV/VCR, programming will appear to take place, but eventually a NO TV SIGNALS ... message will appear on the screen. Connect an antenna or cable to the ANT(enna) jack on the TV/VCR, then press the F.FWD/B button again. You may need to follow the steps on page 10 instead.

CONNECT ANTENNA OR CABLE TO TVCR

THEN PRESS B

TO END PRESS EXIT

SELECT LANGUAGE

> ENGLISH ON

ESPAÑOL

SELECT KL OR PRESS MENU TO CONTINUE

Use the CH(annel) o/p buttons or the Number buttons on the remote control to select a TV/VCR channel. Use the VOL(ume) o/p buttons to adjust the sound.

When you scan channels with the CH(annel) o/p buttons, only the memorized channels will be available. Use the Number buttons to select non-memorized channels.

• If you do not see any on-screen displays when you turn on the TV/VCR, check your hookups, then try again. If you still do not see any on-screen displays, follow the steps on pages nine-10 to select a language and set up channels.

• To skip step 2, press the MENU button. All on-screen displays will be in English. To skip step 4, press the STATUS/EXITbutton. Automatic Channel Setup will not occur, and CHANNELS NOT SET will appear on the screen briefly.

• You cannot set up channels if you are using a Cable Box.

• Line Input mode is channel 00. When you select channel 00, A/V IN will appear on the screen briefly. Press the CH(annel) o/p buttons or the Number buttons to select another channel.

Helpful Hints

3 5

EJECT

SLEEP/

WAKE UP

CH. VOL.

POWER

STATUS/EXIT

1 2 3

4 5 6

7 8 9

REC /OTR

PLAY

REW

F.FWD

STOP

MUTE

SPEED

TRACKING

MEMORY

CLEAR

ALT.CH

PAUSE

/STILL

Language Selection 9

Follow the steps below to change the language of the on-screen displays and menus.

Press the PLAY/▲ button or the STOP/▼ button to choose SELECT LANGUAGE. Then, press the F.FWD/B button.

Press the PLAY/▲ button or the STOP/▼ button to select ENGLISH or ESPAÑOL (Spanish).

Press the STATUS/EXIT button.

SELECT LANGUAGE

> ENGLISH ON

ESPAÑOL

SELECT KL TO END PRESS EXIT

Press the MENU button.

Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP. Then, press the F.FWD/B button.

PRIMARY SETUP

> SELECT LANGUAGE

AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK

SELECT KL CHOOSE B TO END PRESS EXIT

> PRIM. SETUP

VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS

PRESS B

2-4

• If you accidentally select Spanish and need English on-screen displays and menus:

1) Press the MENU button.

2) Press the PLAY/o button or the STOP/p button to select PREPARACION, then press the F.FWD/B button.

3) Press the PLAY/o button or the STOP/p button to select SELECCION IDIOMA, then press the F.FWD/B button.

4) Press the PLAY/o button or the STOP/p button to select ENGLISH.

5) Press the STATUS/EXIT button.

Helpful Hint

EJECT

SLEEP/

WAKE UP

CH. VOL.

POWER

STATUS/EXIT

1 2 3

4 5 6

7 8 9

REC

/OTR

PLAY

REW

F.FWD

STOP

MUTE

SPEED

TRACKING

MEMORY

CLEAR

ALT.CH

PAUSE

/STILL

10 Automatic Channel Setup

Although the TV/VCR may automatically memorize the channels you receive when you turn it on for the first time, you may set up channels again by following the steps below.

Press the MENU button.

Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP, then press the F.FWD/B button.

PRIMARY SETUP

> SELECT LANGUAGE

AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK

SELECT KL CHOOSE B TO END PRESS EXIT

Press the PLAY/▲ button or the STOP/▼ button to select AUTO PROGRAMMING, then press the F.FWD/B button.

AUTO CH PROGRAMMING ... will appear on the screen. The TV/VCR distinguishes between TV channels and cable channels automatically, and the TV/VCR will memorize its available channels.

• Line Input mode will always be channel 00. You cannot delete it.

• You can not select AUTO PROGRAMMING at step 3 if you are in Line Input mode.

Helpful Hints

Wait for a few minutes. When setup is complete, CHANNELS

ARE SET will appear on the screen. Then the programming of the lowest channel number will appear on the screen. Now, when you press the CH(annel) o/p buttons, you will scan only through channels you receive. You can still select non-memorized channels using the Number buttons.

Wait for the TV/VCR to set up channels.

2-3

> PRIM. SETUP

VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS

PRESS B

EJECT

SLEEP/

WAKE UP

CH. VOL.

POWER

STATUS/EXIT

1 2 3

4 5 6

7 8 9

REC /OTR

PLAY

REW

F.FWD

STOP

MUTE

SPEED

TRACKING

MEMORY

CLEAR

ALT.CH

PAUSE

/STILL

Automatic Channel Setup (cont’d) 11

Press the F.FWD/B button or the REW(ind)/{ button to select SAVED (to add that channel) or DELETED (to delete that channel).

Repeat steps 3-4 to add or delete other channels.

Press the STATUS/EXIT button.

Programming of the channel you added or deleted will appear.

Press the CH(annel) o/p buttons or the Number buttons to select the channel you want to add or delete.

• To review the memorized channels, follow these steps.

1) Press the MENU button.

2) Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP. Press the F.FWD/B button.

3) Press the PLAY/▲ button or the STOP/▼ button to select CH MEMORY REVIEW. Press the F.FWD/B button. A list of programmed channels will appear on the screen.

4) If all the programmed channels don’t fit on the screen, press the F.FWD/B button. If you do not press the F.FWD/B button within 10 seconds, the remaining channels will appear on the screen. (If there are no remaining channels, the previous menu will appear.) Or press the REW(ind)/{ button to see the previous screen of channels.

5) Press the STATUS/EXIT button once or twice.

Helpful Hint

Press the MENU button.

Press the PLAY/o button or the STOP/p button to select CHANNEL.

TO ADJUST PRESS { / B

CH23

> CHANNEL

SMARTLOCK REVIEW EXIT PRIM. SETUP VCR PROGRAM

SAVED

TO ADJUST PRESS { / B

CH123

> CHANNEL

SMARTLOCK REVIEW EXIT PRIM. SETUP VCR PROGRAM

SAVED

2,4

Adding/Deleting Channels

If your channel lineup changes, you may want to add newly available channels or remove channels that are no longer available in your area. You can use the CH(annel) o/p buttons to scroll through only the available channels. To add or delete channels from the TV/VCR’s memory, follow these steps.

> PRIM. SETUP

VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS

PRESS B

EJECT

SLEEP/

WAKE UP

CH. VOL.

POWER

STATUS/EXIT

1 2 3

4 5 6

7 8 9

REC

/OTR

PLAY

REW

F.FWD

STOP

MUTE

SPEED

TRACKING

MEMORY

CLEAR

ALT.CH

PAUSE

/STILL

12 Setting the Clock

• Entries that do not match the TV/VCR’s calendar will cause a question mark (?) to appear on the screen.

• To make corrections while you are setting the clock, press the CLEAR button until the space for the number you want to correct is flashing. Then enter the correct number.

Helpful Hints

There are three ways to set the clock: Manually, with Automatic PBS Channel Selection, or with Manual PBS Channel Selection. With manual clock setting, you tell the TV/VCR the current time. With Automatic or Manual PBS Channel Selection, the TV/VCR gets the time from your local PBS station. If you use either Manual PBS Channel Selection or Automatic PBS Channel Selection, follow the steps on page 19 to have the TV/VCR maintain the clock according to your Time Zone.

Cable Box users must set the clock manually.

To set the clock manually, follow the steps on pages 12-13. To set the clock using Automatic PBS Channel Selection, follow the steps on pages 14-15. To set the clock using Manual PBS Channel Selection, follow the steps on pages 16-17. Before you begin, make sure:

● You have connected and turned on the TV/VCR. Details are on

pages six-eight.

● Channels are set. Details are on page 10.

● You make each entry within 60 seconds of the previous entry.

Manual Clock Setting

Press the MENU button.

Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP. Then, press the F.FWD/B button.

PRIMARY SETUP

> SELECT LANGUAGE

AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK

SELECT KL CHOOSE B TO END PRESS EXIT

> PRIM. SETUP

VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS

PRESS B

SET CLOCK

> AUTO CLOCK [ON]

SET MANUAL CLOCK DAYLIGHT SVG.TIME [ON] SET TIME ZONE

[AUTO]

TO CONTINUE PRESS MENU SELECT KL CHOOSE B

TO END PRESS EXIT

Press the PLAY/▲ button or the STOP/▼ button to select SET CLOCK. Then, press the F.FWD/B button.

2-3

EJECT

SLEEP/

WAKE UP

CH. VOL.

POWER

STATUS/EXIT

1 2 3

4 5 6

7 8 9

REC /OTR

PLAY

REW

F.FWD

STOP

MUTE

CLEAR

ALT.CH

PAUSE

/STILL

SPEED

TRACKING

MEMORY

Setting the Clock (cont’d) 13

Press two Number buttons for the hour(s) and two Number buttons for the minute(s). Then press 1 for AM or 2 for PM. For example, for 9:30 PM, press 09, 30, 2.

SET MANUAL CLOCK

TIME 09 : 30 PM

MONTH – – / – – / – – – –

TO CORRECT PRESS CLEAR TO END PRESS EXIT

Press two Number buttons for the month, two Number buttons for the day, and two Number buttons for the year. For example, for July 1, 2001, press 07, 01, 01. The day of

the week will appear automatically.

Press the STATUS/EXIT button.

SET MANUAL CLOCK

TIME 09 : 30 PM DATE 07 / 01 / 2001

SUNDAY

TO CORRECT PRESS CLEAR TO END PRESS EXIT

Press the PLAY/o button or the STOP/p button to select SET MANUAL CLOCK, then press the F.FWD/B button.

SET MANUAL CLOCK

TIME – – : – – DATE – – / – – / – – – –

TO END PRESS EXIT

5-67

EJECT

SLEEP/

WAKE UP

CH. VOL.

POWER

STATUS/EXIT

1 2 3

4 5 6

7 8 9

REC /OTR

PLAY

REW

F.FWD

STOP

MUTE

SPEED

TRACKING

MEMORY

CLEAR

ALT.CH

PAUSE

/STILL

14 Setting the Clock (cont’d)

Automatic PBS Channel Selection

If ON appears beside AUTO CLOCK, press the MENU button. If OFF appears beside AUTO CLOCK, press the PLAY/o button or the STOP/p button to select AUTO CLOCK, then press the F.FWD/B button so that ON appears to the right of AUTO CLOCK. Then, press the MENU button.

Press the MENU button.

Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP. Then, press the F.FWD/B button.

PRIMARY SETUP

> SELECT LANGUAGE

AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK

SELECT KL CHOOSE B TO END PRESS EXIT

Press the PLAY/▲ button or the STOP/▼ button to select SET CLOCK. Then, press the F.FWD/B button.

2-4

AUTO CLOCK AUTO CLOCK USES PBS CHANNEL DATA

> SET PBS CH. AUTO

SET PBS CH. MANUAL

SELECT KL CHOOSE B TO END PRESS EXIT

> PRIM. SETUP

VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS

PRESS B

SET CLOCK

> AUTO CLOCK [ON]

SET MANUAL CLOCK DAYLIGHT SVG.TIME [ON] SET TIME ZONE

[AUTO]

TO CONTINUE PRESS MENU SELECT KL CHOOSE B

TO END PRESS EXIT

EJECT

SLEEP/

WAKE UP

CH. VOL.

POWER

STATUS/EXIT

1 2 3

4 5 6

7 8 9

REC

/OTR

PLAY

REW

F.FWD

STOP

MUTE

SPEED

TRACKING

MEMORY

CLEAR

ALT.CH

PAUSE

/STILL

Setting the Clock (cont’d) 15

When the TV/VCR finds the PBS channel, the time will appear on the screen. Press the STATUS/EXIT button.

NOW SEARCHING flashes on the TV/VCR screen.

● If CANNOT FIND CLOCK DATA flashes on the TV/VCR

screen, you will be prompted to turn off the TV/VCR. Turn off the TV/VCR. Leave it off for several minutes. When

you turn on the TV/VCR again, the clock will be set.

• To display the time on the TV/VCR screen, press the STATUS/EXIT button. Details are on page 26.

• You cannot use the AUTO CLOCK feature if you don’t receive a PBS channel that carries a time signal in your area. Set the clock manually.

Helpful Hints

Press the PLAY/▲ button or the STOP/▼ button to select SET PBS CH. AUTO. Then, press the F.FWD/B button.

SET AUTO CLOCK

TIME – – : – – DATE – – / – – / – – – – NOW SEARCHING

TO END PRESS EXIT

SET AUTO CLOCK

TIME 06 : 30 PM DATE 07 / 01 / 2001

SUNDAY

TO END PRESS EXIT

SET AUTO CLOCK

TIME – – : – – DATE – – / – – / – – – –

CANNOT FIND CLOCK DATA TO END PRESS EXIT

Wait for the TV/VCR to find the time.

EJECT

SLEEP/

WAKE UP

CH. VOL.

POWER

STATUS/EXIT

1 2 3

4 5 6

7 8 9

REC /OTR

PLAY

REW

F.FWD

STOP

MUTE

SPEED

TRACKING

MEMORY

CLEAR

ALT.CH

PAUSE

/STILL

16 Setting the Clock (cont’d)

Manual PBS Channel Selection

Press the MENU button.

Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP. Then, press the F.FWD/B button.

PRIMARY SETUP

> SELECT LANGUAGE

AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK

SELECT KL CHOOSE B TO END PRESS EXIT

AUTO CLOCK AUTO CLOCK USES PBS CHANNEL DATA

> SET PBS CH. AUTO

SET PBS CH. MANUAL

SELECT KL CHOOSE B TO END PRESS EXIT

> PRIM. SETUP

VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS

PRESS B

Press the PLAY/▲ button or the STOP/▼ button to select SET CLOCK. Then, press the F.FWD/B button.

2-41

SET CLOCK

> AUTO CLOCK [ON]

SET MANUAL CLOCK DAYLIGHT SVG.TIME [ON] SET TIME ZONE

[AUTO]

TO CONTINUE PRESS MENU SELECT KL CHOOSE B

TO END PRESS EXIT

EJECT

POWER

STATUS/EXIT

CLEAR

1 2 3

4 5 6

7 8 9

SLEEP/

WAKE UP

REC

/OTR

REW

CH. VOL.

TRACKING

PLAY

STOP

MUTE

SPEED

MEMORY

F.FWD

ALT.CH

PAUSE

/STILL

Setting the Clock (cont’d) 17

When the TV/VCR finds the clock data, the time will appear on the screen. Press the STATUS/EXIT button.

Use the Number buttons to select your PBS station.

● If CANNOT FIND CLOCK DATA flashes on the

TV/VCR screen and you know another PBS channel, press the PLAY/▲ button or the STOP/▼ button to choose SELECT NEW PBS CH. Then, press the F.FWD/B button. Repeat step 6.

● If CANNOT FIND CLOCK DATA flashes on the

TV/VCR screen and you do not know another channel, press the PLAY/▲ button or the STOP/▼ button to select SET PBS CH. AUTO. Then, press the F.FWD/B button. The TV/VCR will search for the PBS channel automati-

cally.

• If the TV/VCR finds the PBS channel, the time will appear on the screen.

• If the TV/VCR does not find the PBS channel, you will be prompted to turn off the TV/VCR. Leave it off for several minutes. When you turn on the TV/VCR again, the time will be set.

AUTO CLOCK (PBS) CH 02

TIME – – : – – DATE – – / – – / – – – –

SELECT CHANNEL NUMBER TO END PRESS EXIT

AUTO CLOCK (PBS) CH 12

TIME 06 : 30 PM DATE 07 / 01 / 2001

SUNDAY

TO END PRESS EXIT

NOW SEARCHING flashes on the TV/VCR screen.

AUTO CLOCK (PBS) CH 12

TIME – – : – – DATE – – / – – / – – – – NOW SEARCHING

TO END PRESS EXIT

• If you have an Antenna hookup, you may select channels 2-69 at step 6. If you have a cable connection, you may select channels 1-125 at step

6. Details about available memorized channels are on page 11.

• To display the time on the TV/VCR screen, press the STATUS/EXIT button. Details are on page 26.

Helpful Hints

Wait for the TV/VCR to find the time.

Press the PLAY/▲ button or the STOP/▼ button to select SET PBS CH. MANUAL. Then, press the F.FWD/B button.

EJECT

SLEEP/

WAKE UP

CH. VOL.

POWER

STATUS/EXIT

1 2 3

4 5 6

7 8 9

REC /OTR

TRACKING

REW

PLAY

STOP

MUTE

SPEED

MEMORY

F.FWD

CLEAR

ALT.CH

PAUSE

/STILL

18 Daylight-Savings Time

Press the PLAY/▲ button or the STOP/▼ button to select DAYLIGHT SVG.TIME. Then, press the F.FWD/B button so that ON or OFF appears beside DAYLIGHT SVG. TIME (Daylight Savings Time).

Press the STATUS/EXIT button.

Press the MENU button.

Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP. Then, press the F.FWD/B button.

PRIMARY SETUP

> SELECT LANGUAGE

AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK

SELECT KL CHOOSE B TO END PRESS EXIT

Press the PLAY/▲ button or the STOP/▼ button to select SET CLOCK. Then, press the F.FWD/B button.

When the Daylight-Savings Time feature is ON, the TV/VCR clock will automatically move forward one hour on the first Sunday in April and move back one hour on the last Sunday in October. To turn Daylight-Savings Time ON or OFF, follow the steps below.

> PRIM. SETUP

VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS

PRESS B

2-4

SET CLOCK

> AUTO CLOCK [ON]

SET MANUAL CLOCK DAYLIGHT SVG.TIME [ON] SET TIME ZONE

[AUTO]

TO CONTINUE PRESS MENU SELECT KL CHOOSE B

TO END PRESS EXIT

EJECT

POWER

STATUS/EXIT

CLEAR

1 2 3

4 5 6

7 8 9

SLEEP/

WAKE UP

REC /OTR

REW

CH. VOL.

TRACKING

PLAY

STOP

MUTE

SPEED

MEMORY

F.FWD

ALT.CH

PAUSE

/STILL

Time Zone 19

When you set the clock using AUTO CLOCK, specify your time zone. The TV/VCR will maintain the clock according to your time zone.

• If you select AUTO at step 5, the TV/VCR will set the clock according to the time zone data of the PBS station it finds.

• You cannot select SET TIME ZONE at step 4 if AUTO CLOCK is OFF.

Helpful Hints

Press the PLAY/▲ button or the STOP/▼ button to select your time zone.

Press the MENU button, then press the STATUS/EXIT button.

Press the MENU button.

Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP. Then, press the F.FWD/B button.

PRIMARY SETUP

> SELECT LANGUAGE

AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK

SELECT KL CHOOSE B TO END PRESS EXIT

SET TIME ZONE

> AUTO [ON]

ATLANTIC EASTERN CENTRAL MOUNTAIN PACIFIC ALASKA HAWAII

SELECT KL TO CONTINUE PRESS MENU

> PRIM. SETUP

VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS

PRESS B

Press the PLAY/▲ button or the STOP/▼ button to select SET CLOCK. Then, press the F.FWD/B button.

Press the PLAY/▲ button or the STOP/▼ button to select SET TIME ZONE. Then, press the F.FWD/B button.

1 2-5

SET CLOCK

> AUTO CLOCK [ON]

SET MANUAL CLOCK DAYLIGHT SVG.TIME [ON] SET TIME ZONE

[AUTO]

TO CONTINUE PRESS MENU SELECT KL CHOOSE B

TO END PRESS EXIT

EJECT

SLEEP/

WAKE UP

CH. VOL.

POWER

STATUS/EXIT

1 2 3

4 5 6

7 8 9

REC /OTR

PLAY

REW

F.FWD

STOP

MUTE

SPEED

TRACKING

MEMORY

CLEAR

ALT.CH

PAUSE

/STILL

20 Front Panel

AUDIO VIDEO

STOP EJECT

REW PLAY F.FWD REC

OTR

CHANNEL

VOLUME

POWER

EARPHONE

Cassette Compartment

Insert a video cassette tape here.

POWER Button

Press to turn the power on or off.

VOLUME o/p Buttons

Press to adjust the sound level. Press the CHANNEL o button and the VOLUME p button on the TV/VCR at the same time to display the main menu. Press again to remove the main menu.

STOP/EJECT Button

Press once to stop the tape. When playback is stopped, press to eject the tape. Press to select an item in the menu.

PLAY Button

Press to play a tape. Details are on page 28. Press to release Search or Still mode and return to normal playback. Details are on page

41. Press to select an item in the menu.

REC(ord)/OTR Button

Press once to start a recording. Details are on page 29. Press repeatedly to start a One-

Touch Recording (an immediate timed recording, 30 minutes to eight hours long) of the channel you are watching. Details are on

page 30.

REW(ind) Button

When tape playback is stopped, press to rewind the tape at high speed. During playback, press to rewind the tape while the picture stays on the screen. Press to change a setting of a menu item (for example, to adjust the BRIGHTNESS) or to return to a previous menu.

F.FWD (Fast Forward) Button

When tape playback is stopped, press to fast forward the tape at high speed. During playback, press to fast forward the tape while the picture stays on the screen. Press to change a setting of a menu item (for example, to adjust the BRIGHTNESS) or to advance to the next menu.

Record Light

This light appears during a recording. It flashes slowly when the TV/VCR power is off for a timer recording. It blinks rapidly when a recording is paused or when the power is off for a timer recording, but there is no tape in the TV/VCR. It will blink rapidly two minutes before a timer recording is set to begin if the TV/VCR power is on.

Wireless Remote Sensor

Receives a signal from your remote control so you can operate the TV/VCR from a distance.

CHANNEL o/p Buttons

Press to scan through the TV/VCR’s memorized channels. During tape playback, press to adjust the tracking.

Details are on page 52.

Press the CHANNEL o button and the VOLUME p button on the TV/VCR at the same time to display the main menu. Press again to remove the main menu.

EARPHONE Jack

Connect earphones (not supplied) here for personal listening.

AUDIO In Jack

Connect this jack to the audio out jack of a camcorder or a VCR. Details are on page 31.

VIDEO In Jack

Connect this jack to the video out jack of a camcorder or a VCR. Details are on page 31.

CC13C1MG

Rear Panel 21

ANT(enna) Jack

Connect your antenna or cable here.

Details are on page six.

Antenna Hole

Connect the stem of an indoor antenna here. Details are on page six.

AC Power Cord

Connect to a standard AC outlet to supply power to the TV/VCR.

CC13C1MG

ANT.

POWER

EJECT

SPEED

MEMORY

1 2 3

4 5 6

7 8 9

CH. VOL.

SLEEP/

WAKE UP

ALT.CH

REW

PLAY

F.FWD

REC

/OTR

PAUSE /STILL

STOP

MUTE

TRACKING

STATUS/EXIT

CLEAR

F.FWD/B Button

When tape playback is stopped, press to fast forward the tape at high speed. During tape playback, press to fast forward the tape while the picture stays on the screen. Details are on page 41. Press to change the setting of a menu item or to go to the next menu.

ALT. CH (Alternate Channel) Button

Press to return to the TV channel you were viewing immediately before switching to your current channel.

PLAY/

▲ Button

Press to play a tape. Details are on page 28. Press to release Search or Still mode and return to normal playback. Details are on page 41. Press to select an item in the menu.

SLEEP/WAKE UP Button

Press to set the Sleep Timer. Details are on page 47. Press to set the Wake Up Timer. Details are on page 48.

SPEED Button

Press to select the recording speed (SP or SLP).

MUTE Button

Press to eliminate the TV/VCR’s sound. Press again to return to the previous volume level.

22 Remote Control Buttons

VOL(ume) o/p Buttons

Press to adjust the sound level. If you press the VOL(ume) o/p buttons when the sound is muted, the sound will be restored.

POWER Button

Press to turn on or off the TV/VCR.

Number Buttons

Use to select channels and to program TV/VCR functions (such as setting the clock).

● Cable Users

Enter channel numbers as a two-digit number for the quickest results. For example, to select channel 6, press 0,6. If you only press the Number 6 button, channel 6 will be selected after a brief delay. (There also may be a brief delay when you select channels 10, 11, and 12.) If you want to select channels 100 and above, enter channel numbers as a three-digit number. For example, to select channel 117, press 1, 1, 7.

● Antenna Users

Enter channel numbers as a two-digit number for the quickest results. For example, to select channel 5, press 0,5. If you only press the Number 5 button, channel 5 will be selected after a brief delay. You may only select channels 2-69.

CLEAR Button

Press to erase incorrect data when programming TV/VCR functions. Also, press to reset the real-time counter to 0:00:00.

Details are on page 40.

EJECT Button

Press to eject the

tape.

POWER

EJECT

SPEED

MEMORY

1 2 3

4 5 6

7 8 9

CH. VOL.

SLEEP/

WAKE UP

ALT.CH

REW

PLAY

F.FWD

REC

/OTR

PAUSE /STILL

STOP

MUTE

TRACKING

STATUS/EXIT

CLEAR

TRACKING o/p Buttons

Press during tape playback to adjust the tracking. Details are on page 52.

Remote Control Buttons (cont’d) 23

CH(annel) o/p Buttons

Press to scan through the TV/VCR’s available channels.

MEMORY Button

Press to memorize a tape position at which you set the real-time counter to 0:00:00. Details are on page 40. Or, press to memorize the start and end positions on a tape when setting up A-B Repeat Play. Details are on pages 38-39.

MENU Button

Press to display the main menu. You also may use the buttons on the front of the TV/VCR to access the main menu. Details are on

page 20.

STATUS/EXIT Button

Press to access or remove the status display. Details are on page 26. Press to remove the menu.

STOP/▼ Button

Press to stop the tape. Press to select an item in the menu.

PAUSE/STILL Button

During recording, press to temporarily stop the recording. Press again to resume recording. Details are on page 29. You cannot pause a One-Touch Recording. During tape playback, press to freeze the picture (still). Each time you press the PAUSE/STILL button, the noise lines will change position on the screen. Details are on page 41.

REW(ind)/{ Button

When tape playback is stopped, press to rewind the tape at high speed. During tape playback, press to rewind the tape while the picture stays on the screen. Details are on page 41. Press to change a setting of a menu item or to return to a previous menu.

REC(ord)/OTR Button

Press once to start a recording. Details are on page 29. Or, press repeatedly to start a One-Touch Recording (an immediate timed recording, 30 minutes to eight hours long) of the channel you are watching. Details are on page 30.

TO ADJUST PRESS { / B

24 Adjusting the Picture Controls

Follow these steps to adjust the TV/VCR’s brightness, picture, color, tint, and sharpness.

Press the MENU button.

Press the PLAY/▲ button or the STOP/▼ button to select the desired control (BRIGHTNESS, for example).

Press the REW(ind)/{ button or the F.FWD/B button to adjust the picture control. (Refer to the chart on page 25.)

When you finish, press the STATUS/EXIT button.

• The menus on page 25 will disappear if you do not make adjustments within 60 seconds.

• The original settings will probably give you the best picture quality.

• To reset the picture controls to the original settings, press the MENU button, then press the PLAY/▲ button or the STOP/▼ button to select TV RESET, then press the F.FWD/B button. TV RESET COMPLETED will appear on the screen briefly.

Helpful Hints

> BRIGHTNESS

PICTURE COLOR TINT SHARPNESS TV RESET

2-3

EJECT

SLEEP/

WAKE UP

CH. VOL.

POWER

STATUS/EXIT

1 2 3

4 5 6

7 8 9

REC

/OTR

PLAY

REW

F.FWD

STOP

MUTE

SPEED

TRACKING

MEMORY

CLEAR

ALT.CH

PAUSE

/STILL

Adjusting the Picture Controls (cont’d) 25

Decrease Increase

BRIGHTNESS decreased brightness increased brightness

PICTURE decreased contrast increased contrast

COLOR paler more brilliant

TINT more purple more green

SHARPNESS softer clearer

Press the REW(ind)/{ button to decrease a picture control. Press

the F.FWD/B button to increase a picture control.

AUDIO VIDEO

STOP EJECT

REW PLAY F.FWD REC

OTR

CHANNEL

VOLUME

POWER

EARPHONE

TO ADJUST PRESS { / B

TO ADJUST PRESS { / BTO ADJUST PRESS { / B

Press the STOP/▼ button

Press the PLAY/▲ button

> BRIGHTNESS

PICTURE COLOR TINT SHARPNESS TV RESET

BRIGHTNESS

> PICTURE

COLOR TINT SHARPNESS TV RESET

BRIGHTNESS PICTURE

> COLOR

TINT SHARPNESS TV RESET

TO ADJUST PRESS { / B

BRIGHTNESS PICTURE COLOR

> TINT

SHARPNESS TV RESET

TO ADJUST PRESS{ / B

BRIGHTNESS PICTURE COLOR TINT

> SHARPNESS

TV RESET

CC13C1MG

• You cannot view closed captions during recording or tape playback if COUNTER ONLY is ON. Details are on pages 50-51.

Helpful Hint

Press the MENU button.

Current Tape Function

Time

Channel

Counter and Counter Memory

Tape Speed

12:00 AM STOP CH10

SLP M 1:23:45

A status display will appear when you press the STATUS/EXIT button or certain function buttons. The contents of the status display will vary. To choose the status display mode, follow the steps below.

If you select STATUS ON, then select COUNTER ONLY OFF:

●Whenever you press the STOP/p button or the PLAY/o but-

ton, the status display will appear for five seconds. Portions of the status display also may appear when you press other function buttons.

If you select STATUS ON, then select COUNTER ONLY ON:

●Whenever you press the PLAY/o button, the status display will

appear for five seconds. After five seconds, only the counter will remain on the screen. Portions of the status display also may appear when you press other function buttons.

If you select STATUS OFF:

●The status display will not appear when you press function but-

tons. You must press the STATUS/EXIT button to see the status display.

Press the PLAY/▲ button or the STOP/▼ button to select VCR SETUP, then press the F.FWD/B button.

Press the PLAY/▲ button or the STOP/▼ button to select ON-SCREEN MODE, then press the F.FWD/B button.

26 On-Screen Status Displays

Press the PLAY/o button or the STOP/p button to select STATUS, then press the F.FWD/B button so that ON or OFF appears beside STATUS.

If you set STATUS to OFF, go to step 6. If you set STATUS to ON, press the PLAY/o button or the STOP/p button to select COUNTER ONLY, then press the F.FWD/B button so that ON or OFF appears beside it.

Press the STATUS/EXIT button.

ON-SCREEN MODE

> STATUS [ON]

COUNTER ONLY [OFF]

SELECT KL CHOOSE B TO END PRESS EXIT

Reminder 27

The channel number will remain on the screen at all times when you set REMINDER to ON. The exception is when closed captioning is selected. Set REMINDER to ON or OFF by following the steps below.

Press the MENU button.

Press the PLAY/▲ button or the STOP/▼ button to select REMINDER.

Press the REW(ind)/{ button or the F.FWD/B button to select ON or OFF. Each press of the REW(ind)/{ button or

the F.FWD/B button turns REMINDER ON or OFF.

Press the STATUS/EXIT button.

TO ADJUST PRESS { / B

CH12

> REMINDER

BRIGHTNESS PICTURE COLOR TINT SHARPNESS

2-3

TO ADJUST PRESS { / B

> REMINDER

BRIGHTNESS PICTURE COLOR TINT SHARPNESS

OFF

> PRIM. SETUP

VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS

PRESS B

EJECT

SLEEP/

WAKE UP

CH. VOL.

POWER

STATUS/EXIT

1 2 3

4 5 6

7 8 9

REC /OTR

PLAY

REW

F.FWD

STOP

MUTE

SPEED

TRACKING

MEMORY

CLEAR

ALT.CH

PAUSE

/STILL

28 Playing

• If the tape you want to play is already in the TV/VCR, turn on the TV/VCR power, then press the PLAY/▲ button.

• Playback features and options are on pages 37-41.

• When you play an S-VHS format tape, you can not get the high resolution that would be available on an S-VHS VCR. Noise lines (black and white streaks) may appear in the picture.

Helpful Hints

Follow the steps below to play a tape.

Insert a tape in the TV/VCR. The power will come on. If the

tape’s record tab is missing, playback should start automatically.

If playback does not start automatically, press the PLAY/▲ button to start playback.

Press the STOP/▼ button to stop playback.

Press the REW(ind)/{ button to rewind the tape.

When the tape finishes rewinding, press the EJECT button to remove the tape.

2 3

Insert a tape in the TV/VCR.

S-VHS Quasi Play Back (SQPB)

SQPB allows you to view a tape recorded in S-VHS format. An SVHS format tape will play the same as a normal format tape. This unit detects whether the tape is in S-VHS format or normal format.

EJECT

SLEEP/

WAKE UP

POWER

STATUS/EXIT

1 2 3

4 5 6

7 8 9

REC

/OTR

PLAY

REW

F.FWD

STOP

CLEAR

ALT.CH

PAUSE

/STILL

CH. VOL.

MUTE

SPEED

TRACKING

MEMORY

Recording 29

• You cannot record one channel while watching another.

• Recording options are on pages 30-36.

• You cannot record if DEFEAT RECORDING is ON. (REC DEFEATED will flash on the screen.) Details are on page 36.

• If you pause a recording for more than five minutes, the TV/VCR will switch to Stop mode automatically to protect the video cassette tape from damage.

• You can change the tape speed with the SPEEDbutton while a recording is in progress, but some distortion may appear on the tape.

Helpful Hints

Read and follow the steps below to record a TV program.

Place a tape with its record tab intact (see page five) in the TV/VCR. The power will come on. Or, if the tape is already in the TV/VCR, press the POWER button to turn on the TV/VCR, if necessary.

Press the SPEED button until the desired tape speed appears on the TV/VCR screen. See tape speed details below.

To stop recording, press the STOP/▼ button.

Use the CH(annel) o/p buttons or the Number buttons to select the channel you want to record. You can not change

channels during recording.

Press the REC(ord)/OTR button once to start recording.

The Record light will glow.

● If there is not a tape in the TV/VCR, NO CASSETTE flashes on

the screen briefly.

● If the tape does not have a record tab, PROTECTED CASSETTE

CANNOT RECORD flashes on the screen briefly. The TV/VCR will eject the tape. Insert another tape.

To pause the recording (for example, during commercials), press the PAUSE/STILL button. The Record light will flash. To resume recording, press the PAUSE/STILL button again or the REC(ord)/OTR button. The Record light will glow.

Cassette type / Playback Time Tape Speed T160 T120 T60 SP(Standard Play) 2 hrs.

2 hrs. 1 hr.

40 mins.

(Long Play) 5 hrs.

4 hrs. 2 hrs.

(playback only) 20 mins.

SLP(Super Long Play)

8 hrs. 6 hrs. 3 hrs.

Tape Speeds

This chart shows the recording/playback time for three types of video cassettes (T160, T120, and T60). There are three playback speeds: SP, LP, and SLP. A tape will play only in the speed in which it was recorded. When recording, you can change the tape speed using the SPEED button. You cannot record in LP speed. The slower the speed, the more programming you can fit on the tape. SLPis the slowest speed.

EJECT

SLEEP/

WAKE UP

CH. VOL.

POWER

STATUS/EXIT

1 2 3

4 5 6

7 8 9

REC /OTR

PLAY

REW

F.FWD

STOP

MUTE

SPEED

TRACKING

MEMORY

CLEAR

ALT.CH

PAUSE

/STILL

30 One-Touch Recording

A One-Touch Recording (OTR) is an immediate timed recording from 30 minutes to eight hours long. Before you begin, make sure:

● Channels are set. Details are on page 10.

● A tape is in the TV/VCR. The record tab must be intact.

Use the CH(annel) o/p buttons or the Number buttons to select the channel you want to record.

Press the SPEED button until the desired recording speed (SP or SLP) appears on the screen. Details are on page 29.

Press the REC(ord)/OTR button repeatedly until the desired

recording length appears in the upper right corner of the screen. Recording will begin immediately. The Record light will appear.

OTR LENGTH 0:30 CH12

LENGTH : PRESS OTR CANCEL : PRESS CLEAR

To stop an OTR before recording is finished, press the STOP/EJECT button on the TV/VCR. Or, press the REC(ord)/OTR button, then press the CLEAR button, then press the STOP/▼ button on the remote control.

If the end of a tape is reached during an OTR, recording will stop. The TV/VCR will turn itself off and eject the tape. The Record light will flash rapidly. The TV/VCR will turn off at the end of the OTR.

• To check the time remaining for an OTR, press the STATUS/EXITbutton.

• To change the recording length while an OTR is in progress, press the REC(ord)/OTRbutton until the desired recording length appears on the screen.

• You can not pause an OTR.

• To cancel an OTR but continue recording, press the REC(ord)/OTR button, then press the CLEAR button.

• You cannot record if DEFEAT RECORDING is ON. Details are on page 36.

• You can change the tape speed with the SPEEDbutton while a recording is in progress, but some distortion may appear on the tape.

Helpful Hints

Press the STOP/EJECT button on the TV/VCR to stop the OTR.

EJECT

SLEEP/

WAKE UP

CH. VOL.

POWER

STATUS/EXIT

1 2 3

4 5 6

7 8 9

REC /OTR

PLAY

REW

F.FWD

STOP

MUTE

SPEED

TRACKING

MEMORY

CLEAR

ALT.CH

PAUSE

/STILL

Rerecording (Tape Duplication) 31

• Unauthorized recording of copyrighted television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws.

• Different brands of equipment may operate differently.

• Make sure all connections are secure. Otherwise, you may not record both picture and sound.

• Programs that are copyright protected may not record clearly.

Helpful Hints

Point the TV/VCR remote control at the TV/VCR. Press the SPEED button until the desired tape speed (SP or SLP) appears on the screen.

VIDEO

OUT

AUDIO

AUDIO VIDEO

STOP EJECT

EARPHONE

AUDIO and VIDEO OUT Jacks on source unit

(VCR or Camcorder)

AUDIO and VIDEO In

Jacks on TV/VCR

The source unit will play your tape. Insert a prerecorded tape in the source unit. If playback begins, press the STOP button on the

unit.

The TV/VCR will record your tape. Insert a blank tape in the TV/VCR. Make sure the tape’s record tab is intact. The TV/VCR

power will turn on automatically.

Point the TV/VCR remote control at the TV/VCR. Press Number buttons 0, 0 so that A/V IN appears on the screen.

The TV/VCR is now in Line Input mode.

Press the PLAY button on the source unit and the REC(ord)/OTR button on your TV/VCR at the same time.

Copying will begin.

To stop copying, press the STOP/EJECT button on the TV/VCR, then stop the tape on the source unit (VCR or camcorder).

Make the connections shown above, using audio and video cables (not supplied). Connect the source unit (VCR or camcorder) to a power source after connections are made.

CC13C1MG

Audio Cable from

AUDIO OUT to AUDIO In

Video Cable from

VIDEO OUT to VIDEO In

32 Timer Recording

Follow the steps below to program the TV/VCR to record TV programs while you’re away from home. The TV/VCR will turn itself on, record, and turn itself off automatically. Before you begin, make sure:

● The clock is set. If not, CLOCK MUST BE SET appears, fol-

lowed by the SET CLOCK menu. Details are on pages 12-17.

● Channels are set. Details are on page 10.

● A tape is in the TV/VCR. Make sure the tape’s record tab is

intact and the tape is long enough to record the program.

Complete each step within 60 seconds of completing the previous step. If you don’t, you may start again at step 1.

Press the PLAY/▲ button or the STOP/▼ button to select VCR PROGRAM, then press the F.FWD/B button.

Press the PLAY/▲ button or the STOP/▼ button to select a ONCE, DAILY, OR WEEKLY recording. Then, press the F.FWD/B button.

●ONCE: The TV/VCR will record a TV program on any day you

choose, up to 12 months away.

●DAILY: The TV/VCR will record every day from Monday to

Friday – starting at the same time and recording the same channel for the same length of time.

● WEEKLY: The TV/VCR will record the same channel on the

same day, at the same time, and for the same length of time every week.

Press the MENU button.

• With ShowGuard, you don’t have to worry about losing your timer recordings. If the power fails, timer recordings will be restored when the clock is reset. (The clock will reset itself automatically if you are using AUTO CLOCK. Details are on pages 14-17. If you are not using AUTO CLOCK, reset the clock manually. Details are on pages 12-13.) The timer recording will not occur only if it was scheduled to take place during the power failure.

• You cannot set a timer recording if DEFEAT RECORDING is ON. Details are on page 36.

Helpful Hints

> PRIM. SETUP

VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS

PRESS B

DAILY PROGRAM (MON-FRI)

PROGRAM -1 2 3 4 5 6 7 8-

SELECT PROGRAM NUMBER TO END PRESS EXIT

Daily Recording (example)

VCR PROGRAM

> ONCE

DAILY(MON-FRI) WEEKLY PROGRAM REVIEW

SELECT KL CHOOSE B TO END PRESS EXIT

2-3

EJECT

SLEEP/

WAKE UP

POWER

STATUS/EXIT

1 2 3

4 5 6

7 8 9

REC

/OTR

PLAY

REW

STOP

F.FWD

CLEAR

ALT.CH

PAUSE

/STILL

CH. VOL.

MUTE

SPEED

TRACKING

MEMORY

ONE TIME PROGRAM

PROGRAM 1 CHANNEL – – –

TO CORRECT PRESS CLEAR TO END PRESS EXIT

Timer Recording (cont’d) 33

Use the Number buttons to enter the channel of the TV program you want to record.

● If you are recording from line input, press 0, 0. A/V IN will

appear on the screen.

● If you are recording using a Cable Box, enter the Cable Box

output channel (03 or 04). Be sure to select the channel of the TV program at the Cable Box and leave the Cable Box on for the timer recording.

Use the Number buttons (1-8) to select a position in which to store the timer recording. Flashing numbers indi-

cate an open position (one in which a timer recording has not been stored yet).

NOTE: If you select a number that already has been used to store a timer recording, PREVIOUSLYSET PROGRAM will appear on the screen for a few seconds. Then information about the program in that position will appear on the screen. If this happens, press the STATUS/EXIT button. Then use the Number buttons to select another position.

Press two Number buttons for the hour(s) you want the recording to begin. Press two Number buttons for the minute(s) you want the recording to begin. Press 1 for AM or 2 for PM. For example, for 9:30 PM, press 09, 30, 2.

ONE TIME PROGRAM

PROGRAM 1 CHANNEL 10

TIME ON – – : – –

TO CORRECT PRESS CLEAR TO END PRESS EXIT

Follow the instructions in step 6 to set the recording’s stop time. (AM or PM will be set automatically.)

ONE TIME PROGRAM

PROGRAM 1 CHANNEL 10

TIME ON 09:30 PM TIME OFF – – : – –

TO CORRECT PRESS CLEAR TO END PRESS EXIT

• If you enter numbers that do not match the TV/VCR’s clock or calendar, the entry will be rejected and a question mark will appear on the screen.

• To make corrections while you are programming a timer recording, press the CLEAR button until the cursor is flashing on the item you want to change. Then enter the correct information.

Helpful Hints

4-7

Instructions continue on page 34.

EJECT

SLEEP/

WAKE UP

CH. VOL.

POWER

STATUS/EXIT

1 2 3

4 5 6

7 8 9

REC /OTR

PLAY

REW

F.FWD

STOP

MUTE

SPEED

TRACKING

MEMORY

CLEAR

ALT.CH

PAUSE

/STILL

34 Timer Recording (cont’d)

Turn off the TV/VCR

for the recording.

Insert a tape in

the TV/VCR.

Leave the Cable

Box/DBS on

(if applicable).

Press the Number 1 button to record in SP speed or press the Number 2 button to record in SLP speed. Details

about tape speed are on page 29. You cannot use the SPEEDbutton at this time.

Press two Number buttons for the month and two Number buttons for the day you want the program to record. For example, for July 10, 2001, press 07, 10. The day of

the week and the year will appear automatically. (You cannot program the TV/VCR to record more than one year in advance.)

ONE TIME PROGRAM

PROGRAM 1 CHANNEL 10

TIME ON 09:30 PM TIME OFF 11:00 PM REC SPEED SLP

SP=1 SLP=2

TO CORRECT PRESS CLEAR TO END PRESS EXIT

ONE TIME PROGRAM

PROGRAM 1 CHANNEL 10

TIME ON 09:30 PM TIME OFF 11:00 PM REC SPEED SLP START DATE 07/10/2001

TUESDAY

TO CORRECT PRESS CLEAR TO END PRESS EXIT

Press the STATUS/EXIT button. PROGRAM WAS COM-

PLETED PLEASE TURN OFF FOR TIMER RECORDING will appear on the screen.

● If there is not a tape in the TV/VCR, PLEASE INSERT CAS-

SETTE also appears on the screen.

● If there is a tape without a record tab in the TV/VCR, PLEASE

REMOVE CASSETTE also appears on the screen. If this happens, insert a different tape.

● If PROGRAM NOTCOMPLETED appears, start again at step 1.

Press the POWER button to turn off the TV/VCR power.

The Record light will flash slowly. If you forget to turn off the TV/VCR, PLEASE TURN OFF FOR TIMER RECORDING appears on the TV/VCR screen two minutes before a timer recording should begin.

• PROGRAM NOT COMPLETED / CLASH may appear on the screen when you finish setting a timer recording. This means the timer recording you just tried to program overlaps with another timer recording. The latest timer recording will not occur.

• To stop a timer recording that is in progress, press the STOP/EJECT button on the TV/VCR once.

Please see page 54 for more Helpful Hints.

Helpful Hints

EJECT

STATUS/EXIT

1 2 3

4 5 6

7 8 9

SLEEP/

WAKE UP

REC

/OTR

PLAY

REW

STOP

CH. VOL.

MUTE

SPEED

TRACKING

MEMORY

POWER

CLEAR

ALT.CH

PAUSE

/STILL

F.FWD

Timer Recording (cont’d) 35

Repeat steps 1-4 to make sure you cleared the correct recording.

Checking or Clearing Timer Recordings

With the TV/VCR on, press the MENU button.

Press the PLAY/▲ button or the STOP/▼ button to select VCR PROGRAM, then press the F.FWD/B button.

Press the PLAY/▲ button or the STOP/▼ button to select PROGRAM REVIEW, then press the F.FWD/B button.

The timer recording information for the program in the lowest numbered position will appear on the screen. If no timer recordings are programmed, nothing will happen when you select PROGRAM REVIEW and press the F.FWD/B button.

Press the F.FWD/B button to display information about the next timer recording. (If you do not press a button within 10 sec-

onds, information about the next timer recording will appear automatically.) This will continue until all positions have been displayed. Then, the menu will disappear. You can exit the Program Review at any time by pressing the STATUS/EXIT button.

To cancel the timer recording displayed, press the CLEAR button. Either the display will disappear or information

about other timer recordings will appear. If you do not press any other buttons, the display will disappear after all timer recordings have been displayed.

2-45

Helpful Hint

EJECT

POWER

STATUS/EXIT

CLEAR

1 2 3

4 5 6

7 8 9

SLEEP/

WAKE UP

REC /OTR

REW

CH. VOL.

TRACKING

PLAY

STOP

MUTE

SPEED

MEMORY

F.FWD

ALT.CH

PAUSE

/STILL

36 Defeat Recording

Follow the steps below to prevent accidental recording.

Press the PLAY/▲ button or the STOP/▼ button to select VCR SETUP, then press the F.FWD/B button.

Press the PLAY/▲ button or the STOP/▼ button to select DEFEAT RECORDING, then press the F.FWD/B button so that ON appears beside DEFEAT RECORDING.

Press the STATUS/EXIT button.

• If you set DEFEAT RECORDING to ON after you program a timer recording, the timer recording will not occur.

• You can not program a timer recording if DEFEAT RECORDING is ON.

• To set DEFEAT RECORDING to OFF, repeat steps 1-2 above. At step 3, press the PLAY/o button or the STOP/p button to select DEFEAT RECORDING, then press the F.FWD/B button so that OFF appears beside DEFEAT RECORDING. Press the STATUS/EXIT button.

Helpful Hints

VCR SETUP

> ONE TIME PLAY [ON]

REPEAT PLAY ON-SCREEN MODE DEFEAT RECORDING [OFF] BLUE BACKGROUND [ON]

SELECT KL CHOOSE B TO END PRESS EXIT

VCR SETUP

ONE TIME PLAY [ON] REPEAT PLAY ON-SCREEN MODE

> DEFEAT RECORDING [ON]

BLUE BACKGROUND [ON]

SELECT KL CHOOSE B TO END PRESS EXIT

Now, REC DEFEATED will flash on the screen when you press the REC(ord)/OTR button.

REC DEFEATED

Press the MENU button.

> PRIM. SETUP

VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS

PRESS B

2-3

EJECT

SLEEP/

WAKE UP

CH. VOL.

POWER

STATUS/EXIT

1 2 3

4 5 6

7 8 9

REC /OTR

PLAY

REW

F.FWD

STOP

MUTE

SPEED

TRACKING

MEMORY

CLEAR

ALT.CH

PAUSE

/STILL

Repeat Play 37

Follow the steps below to program the TV/VCR to play a tape over and over.

Press the PLAY/▲ button or the STOP/▼ button to select VCR SETUP, then press the F.FWD/B button.

Press the PLAY/▲ button or the STOP/▼ button to select REPEAT PLAY, then press the F.FWD/B button so that ON appears beside REPEAT PLAY.

Press the STATUS/EXIT button. Now, when a tape finishes

playing, the TV/VCR will rewind it and start playback again. (TV programming will appear while the tape is rewinding.)

• The TV/VCR will stay in Repeat Play mode until you set ONE TIME PLAY to ON, even if you turn off the TV/VCR. To set ONE TIME PLAY to ON, follow steps 1-2 above. Then, press the PLAY/o button or the STOP/p button to select ONE TIME PLAY. Press the F.FWD/B button so that ON appears beside ONE TIME PLAY. Then, press the STATUS/EXIT button.

• The real-time counter memory will not function during Repeat Play mode.

Helpful Hints

Press the MENU button.

> PRIM. SETUP

VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS

PRESS B

VCR SETUP

> ONE TIME PLAY [ON]

REPEAT PLAY ON-SCREEN MODE DEFEAT RECORDING [OFF] BLUE BACKGROUND [ON]

SELECT KL CHOOSE B TO END PRESS EXIT

VCR SETUP

ONE TIME PLAY

> REPEAT PLAY [ON]

ON-SCREEN MODE DEFEAT RECORDING [OFF] BLUE BACKGROUND [ON]

SELECT KL CHOOSE B TO END PRESS EXIT

2-3

EJECT

SLEEP/

WAKE UP

CH. VOL.

POWER

STATUS/EXIT

1 2 3

4 5 6

7 8 9

REC /OTR

PLAY

REW

F.FWD

STOP

MUTE

SPEED

TRACKING

MEMORY

CLEAR

ALT.CH

PAUSE

/STILL

38 A-B Repeat Play

• To cancel A-B Repeat Play, set ONE TIME PLAY to ON. To set ONE TIME PLAY to ON, follow steps 2-3 above. Then, press the PLAY/o button or the STOP/p button to select ONE TIME PLAY. Press the F.FWD/B button so that ON

appears beside ONE TIME PLAY. Then, press the STATUS/EXIT button.

• The end position (B) must be later on

the tape than the start position (A).

Helpful Hints

Follow the steps below to program the TV/VCR to play the material between two specified points (A and B) on a tape over and over again.

Insert a tape in the TV/VCR.

Press the PLAY/▲ button or the STOP/▼ button to select VCR SETUP, then press the F.FWD/B button.

Press the F.FWD/B button repeatedly so that A-B appears beside REPEAT PLAY.

Press the PLAY/▲ button or the STOP/▼ button to select REPEAT PLAY.

Press the MENU button.

Insert a tape in the TV/VCR.

> PRIM. SETUP

VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS

PRESS B

VCR SETUP

> ONE TIME PLAY [ON]

REPEAT PLAY ON-SCREEN MODE DEFEAT RECORDING [OFF] BLUE BACKGROUND [ON]

SELECT KL CHOOSE B TO END PRESS EXIT

VCR SETUP

ONE TIME PLAY [ON]

> REPEAT PLAY

ON-SCREEN MODE DEFEAT RECORDING [OFF] BLUE BACKGROUND [ON]

SELECT KL CHOOSE B TO END PRESS EXIT

VCR SETUP

ONE TIME PLAY

> REPEAT PLAY [A-B]

ON-SCREEN MODE DEFEAT RECORDING [OFF] BLUE BACKGROUND [ON]

SELECT KL CHOOSE B TO END PRESS EXIT

3-5

EJECT

SLEEP/

WAKE UP

CH. VOL.

POWER

STATUS/EXIT

1 2 3

4 5 6

7 8 9

REC

/OTR

PLAY

REW

F.FWD

STOP

MUTE

SPEED

TRACKING

MEMORY

CLEAR

ALT.CH

PAUSE

/STILL

Press the STATUS/EXIT button to remove the menu. A-B

REPEAT will appear on the screen. Beneath it, the letter A will flash beside the real-time counter.

A-B REPEAT

A 0:12:34

Play, fast forward, or rewind the tape to the position at which you want to begin playback. Stop the tape, then press the MEMORY button to set the start position (A).

The flashing A will become a flashing B.

A-B REPEAT

B 0:00:00

Play or fast forward the tape to the position at which you want playback to end. Stop the tape, then press the MEMORY button to set the end position (B).

● The length of time between the start position (A) and the end

position (B) must be at least three minutes.

The TV/VCR will immediately rewind the tape to the start position (A) and repeat playback to the end position (B) over and over. (TV programming will appear while the tape is rewinding.)

A-B Repeat Play (cont’d) 39

7-8

• The counter cannot be memorized or reset when you are using this feature.

• A-B Repeat Play will be cancelled if you eject the tape or press the REC(ord)/OTR button.

• A-B REPEAT will not appear on the screen at step 6 if a tape is not in the TV/VCR. NO CASSETTE will flash on the screen briefly.

• You cannot rewind or fast forward beyond points A or B when you are using this feature.

• A-B Repeat Play will be retained if you turn off the TV/VCR power.

Helpful Hints

EJECT

SLEEP/

WAKE UP

CH. VOL.

POWER

STATUS/EXIT

1 2 3

4 5 6

7 8 9

REC /OTR

PLAY

REW

F.FWD

STOP

MUTE

SPEED

TRACKING

MEMORY

CLEAR

ALT.CH

PAUSE

/STILL

40 Real-Time Counter Memory

Follow the steps below to reset the real-time counter to zero at a tape location you want to refer to later.

Play, fast forward, or rewind a tape to the location that you would like to refer to later. Stop the tape.

Press the STATUS/EXIT button. The real-time counter will

appear on the screen.

While the counter remains on the screen, press the CLEAR button to reset the real-time counter to zero.

While the counter remains on the screen, press the MEMORY button so that M appears on the screen. To erase a

real-time counter memory, press the MEMORY button so that the M disappears from the screen.

01:08 PM STOP CH10

SLP 1 : 23 : 45

To go to the tape location where you set the real-time counter to zero, press the REW(ind)/s button or the F.FWD/B button when playback is stopped. When the tape reaches the point at which you set the counter to zero, the tape will stop. Press the PLAY/o button to watch the tape.

• The real-time counter memory will not function during Repeat Play mode. Details are on page 37.

• You may only set one real-time counter memory at a time. If you set the real-time counter to zero at a second location, the previous realtime counter to zero setting will be lost.

Helpful Hints

0 : 00 : 00

M 0 : 00 : 00

1,5

EJECT

STATUS/EXIT

1 2 3

4 5 6

7 8 9

SLEEP/

WAKE UP

REC

/OTR

REW

CH. VOL.

TRACKING

MEMORY

PLAY

STOP

MUTE

SPEED

POWER

F.FWD

CLEAR

ALT.CH

PAUSE

/STILL

Playback Options 41

Forward and Reverse Searching (SP/LP/SLP)

During tape playback, press and release the F.FWD/B button or the REW(ind)/{ button. A fast forward or reverse picture search will begin.

To return to normal playback, press the PLAY/▲ button.

Super High Speed Searching (LP/SLP)

During tape playback, press the F.FWD/B button or the REW(ind)/{ button, then press again. The TV/VCR will now search in super high speed. Press the F.FWD/B button or the REW(ind)/{ button repeatedly to switch between regular and super high speed searching.

To return to normal playback, press the PLAY/▲ button.

Viewing a Still Picture

During tape playback, press the PAUSE/STILL button. A still picture will appear on the screen. The noise lines will move each time you press the PAUSE/STILL button.

To release the still picture and return to normal playback, press the PLAY/▲ button.

• Still mode will automatically switch to Stop mode after five minutes to protect the TV/VCR and the tape from damage.

• SP/LP/SLP means this feature will work with tapes recorded in Standard Play, Long Play, or Super Long Play. For details about tape speed, see page 29.

• LP/SLP means this feature will work with tapes recorded in Long Play and Super Long Play. For details on tape speed, see page 29.

• During forward and reverse searching, horizontal noise bars will appear on the TV/VCR screen.

• Tapes recorded in SLP speed will have the clearest picture during forward and reverse searching and Still mode.

Helpful Hints

EJECT

SLEEP/

WAKE UP

CH. VOL.

TRACKING

POWER

STATUS/EXIT

1 2 3

4 5 6

7 8 9

REC

/OTR

PLAY

REW

F.FWD

STOP

MUTE

SPEED

MEMORY

CLEAR

ALT.CH

PAUSE /STILL

42 SmartLock

SmartLock enables parents to prevent their children from watching inappropriate material on TV. SmartLock reads the ratings for programming (except for news and sports programs, unedited movies on premium cable channels, and Emergency Broadcast System signals), then denies access to programming if the program’s rating meets or exceeds the limitations you select. The ratings are defined on page 45. To block ratings, follow the steps below.

• If the “Incorrect Access Code...” message appears after step 3, enter the correct access code.

• Programming may be rated by the Motion Picture Association of America (MPAA) or according to the Television Parental Guidelines. In order to block any inappropriate programming, set your limits in both places (Movie Ratings and Parental Guidelines). You will complete steps 1-7 twice, choosing Movie Ratings at step 5 the first time, then choosing Parental Guidelines at step 5 the second time.

• You can not view tape playback if the rating of the tape is blocked.

• If you enter the access code once, you may change channels without seeing the “CHANNEL XX BLOCKED” message again. If you turn off the TV/VCR power, you will be asked for the access code again when you tune to a blocked channel.

Helpful Hints

Press the MENU button.

Press the PLAY/▲ button or the STOP/▼ button to select SMARTLOCK. Then, press the F.FWD/B button.

SMARTLOCK

Enter Your Access Code

Use the Number buttons to enter your access code.

The default code is 0711. If you have not set up your personal access code, you should use 0711. (To set up your personal access code, see page 44.) The SMARTLOCK menu will appear.

SMARTLOCK

> BLOCK

CHANGE CODE

SELECT KL CHOOSE B TO END PRESS EXIT

_ _ _ _

2,4

Press the PLAY/▲ button or the STOP/▼ button to select BLOCK. Then, press the F.FWD/B button.

SMARTLOCK

Enter Your Access Code

X X X -

> PRIM. SETUP

VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS

PRESS B

EJECT

SLEEP/

WAKE UP

CH. VOL.

POWER

STATUS/EXIT

1 2 3

4 5 6

7 8 9

REC /OTR

PLAY

REW

F.FWD

STOP

MUTE

CLEAR

ALT.CH

PAUSE

/STILL

SPEED

TRACKING

MEMORY

SmartLock (cont’d) 43

Press the PLAY/▲ button or the STOP/▼ button to select Movie Ratings or Parental Guidelines. Then, press the F.FWD/B button.

BLOCK

> Movie Ratings

Parental Guidelines

SELECT KL CHOOSE B TO END PRESS EXIT

Press the PLAY/▲ button or the STOP/▼ button to select the rating you want to block. Then, press the F.FWD/B button so that ON appears beside the rating.

For example, if you set PG to ON, you may not view PG programming because the block is on. Programs with a PG or higher rating will be blocked. A “CHANNEL XX BLOCKED...” message will appear when someone tries to access such programming.

Press the STATUS/EXIT button.

●More specific sub-ratings are available for TV-Y7, TV-PG, TV-14,

and TV-MA. (See example below.) When you press the F.FWD/B button to turn on TV-Y7, TV-PG, TV-14 or TV-MA, additional sub-ratings will appear. If you select the rating category, such as TV-PG, and turn it on or off, the specific sub-ratings, such as V for Violence, will turn on or off automatically. You can always turn specific sub-ratings on or off by selecting them individually. However, you may only set a sub-rating to ON if the rating category is set to ON.

●Ratings are defined on page 45.

• If the “CHANNEL XX BLOCKED...” or “PLAYBACK BLOCKED...” message appears and you want to view this programming, enter your access code. The channel will remain blocked until you enter the correct code. If you do not know the code, you will have to select another channel or press the STOP/p button.

• Ratings will remain blocked even after a power failure.

• You cannot access the menu when the “CHANNEL XX BLOCKED...” or “PLAYBACK BLOCKED...” message appears.

Helpful Hints

7 5-6

TV-PG

> TV-PG [OFF]

D [OFF] L [OFF] S [OFF] V [OFF]

SELECT KL CHOOSE B TO END PRESS EXIT

Example

of specific

sub-ratings

MOVIE RATINGS

>G [OFF]

PG [OFF] PG-13 [OFF] R [OFF] NC-17 [OFF] X [OFF]

SELECT KL CHOOSE B TO END PRESS EXIT

PARENTAL GUIDELINES

>TV-Y [OFF]

TV-Y7

- - - - - - - - - - - - - - - -

TV-G [OFF] TV-PG

TV-14 > TV-MA

SELECT KL CHOOSE B

TO END PRESS EXIT

EJECT

SLEEP/

WAKE UP

CH. VOL.

POWER

STATUS/EXIT

1 2 3

4 5 6

7 8 9

REC /OTR

PLAY

REW

F.FWD

STOP

MUTE

SPEED

TRACKING

MEMORY

CLEAR

PAUSE

ALT.CH

/STILL

To change the access code, follow these steps.

44 SmartLock (cont’d)

Press the MENU button.

Press the PLAY/▲ button or the STOP/▼ button to select SMARTLOCK. Then, press the F.FWD/B button.

SMARTLOCK

Enter Your Access Code

> SMARTLOCK

REVIEW EXIT PRIM. SETUP VCR PROGRAM VCR SETUP

PRESS B

Use the Number buttons to enter your old access code.

The default code is 0711. If you have never set up your personal access code, use 0711 now. After you enter the code, the SMARTLOCK menu will appear.

_ _ _ _

SMARTLOCK

Enter Your Access Code

X X X -

SMARTLOCK

BLOCK

> CHANGE CODE

SELECT KL CHOOSE B TO END PRESS EXIT

Press the PLAY/▲ button or the STOP/▼ button to select CHANGE CODE. Then, press the F.FWD/B button.

Use the Number buttons to enter your desired access code in the New Code space. Then, enter the same code in the Confirm Code space.

Your new access code should be recorded. You will return to the SMARTLOCK menu.

Press the STATUS/EXIT button.

2,4

5 3

• To protect the privacy of the access code, an X will appear on the screen instead of the number you enter.

• If a “Wrong Code...” message appears on the screen after you complete step 5, you entered the wrong numbers in the Confirm Code space. Repeat the steps on this page.

• You cannot use the default code after you set up your personal access code.

• If a power failure occurs, the default code, 0711, will be the active access code again.

• If you connect the power cord to an AC outlet that is controlled by a wall switch, your personal access code will be erased every time you turn off the power at the wall switch. The default code will be the active code again.

Helpful Hints

New Code Confirm Code

_ _ _ _

POWER

EJECT

SPEED

MEMORY

1 2 3

4 5 6

7 8 9

CH. VOL.

SLEEP/

WAKE UP

ALT.CH

REW

PLAY

F.FWD

REC /OTR

PAUSE

/STILL

STOP

MUTE

TRACKING

STATUS/EXIT

CLEAR

SmartLock (cont’d) 45

To check the SmartLock settings and see which ratings you have blocked, follow these steps.

Press the MENU button.

Press the PLAY/▲ button or the STOP/▼ button to select REVIEW. Then, press the F.FWD/B button so that the SmartLock settings appear.

Ratings that are blocked will appear on the screen. An “X” will appear if a specific sub-rating is blocked, such as V for Violence in the TV-14 category.

Press the STATUS/EXIT button.

> REVIEW

EXIT PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION

PRESS B

BLOCKED RATINGS Movie Ratings G PG-13 NC-17 Parental Guidelines

TV-Y7

- - - - - - - - - - - - - - - - - - - -

TV-G

D L S V TV-PG x x TV-14 x x x x TV-MA – x x x

RATING EXPLANATIONS

For Movie Ratings

• G - General Audience

• PG - Parental Guidance suggested.

• PG-13 - Unsuitable for children under 13

• R - Restricted; under 17 requires accompanying parent or adult guardian

• NC-17 - No one under 17 admitted

• X - Mature audience only

For Parental Guidelines

• V - Violence

• S - Sexual situations

• L - Language

• D - Inappropriate dialogue

• FV - Fantasy Violence may frighten children under seven; TV-Y7 category only. Some cartoons may have this rating.

• TV-Y - Appropriate for all children

• TV-Y7 - Appropriate for children seven and older

• TV-G - General Audience

• TV-PG - Parental Guidance suggested.

• TV-14 - Unsuitable for children under 14

• TV-MA - Mature audience only

EJECT

SLEEP/

WAKE UP

CH. VOL.

POWER

STATUS/EXIT

1 2 3

4 5 6

7 8 9

REC /OTR

TRACKING

REW

PLAY

STOP

MUTE

SPEED

MEMORY

F.FWD

CLEAR

ALT.CH

PAUSE

/STILL

Press the PLAY/oobutton or the STOP/ppbutton to select VCR SETUP, then press the F.FWD/BBbutton.

46 Blue Background

If you want the TV screen to be solid blue when a weak signal is received, set BLUE BACKGROUND to ON. The screen will be blue and the sound will be muted. Or, if you want to receive the weak signal, set BLUE BACKGROUND to OFF. When you select a channel that is receiving a weak signal, you will see and hear the static in the TV programming. To set BLUE BACKGROUND to ON or OFF, follow the steps below.

Press the MENU button.

> PRIM. SETUP

VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS

PRESS B

VCR SETUP

> ONE TIME PLAY [ON]

REPEAT PLAY ON-SCREEN MODE DEFEAT RECORDING [OFF] BLUE BACKGROUND [ON]

SELECT KL CHOOSE B TO END PRESS EXIT

VCR SETUP

ONE TIME PLAY [ON] REPEAT PLAY ON-SCREEN MODE DEFEAT RECORDING [OFF]

> BLUE BACKGROUND [ON]

SELECT KL CHOOSE B TO END PRESS EXIT

Press the PLAY/oobutton or the STOP/ppbutton to select BLUE BACKGROUND. Then, press the F.FWD/BBbutton repeatedly so that OFF (or ON) appears beside BLUE BACKGROUND.

Press the STATUS/EXIT button.

2-3

• A blue screen may appear briefly between channel changes if BLUE BACKGROUND is ON. To avoid having the brief blue screen, set BLUE BACKGROUND to OFF.

Helpful Hint

EJECT

SLEEP/

WAKE UP

CH. VOL.

POWER

STATUS/EXIT

1 2 3

4 5 6

7 8 9

REC

/OTR

PLAY

REW

F.FWD

STOP

MUTE

CLEAR

ALT.CH

PAUSE

/STILL

TRACKING

SPEED

MEMORY

Press the SLEEP/WAKE UP button.

• To cancel the sleep timer, press the SLEEP/WAKE UP button. Press the PLAY/o button or the STOP/ p button to select SLEEP, then press the REW(ind)/ssbutton or the F.FWD/BBbutton to select OFF. Press the STATUS/EXIT button.

• To see how much time remains before the TV/VCR shuts itself off, press the SLEEP/WAKE UP button once. If necessary, press the PLAY/o button or the STOP/p button to select SLEEP. The remaining time will appear beside SLEEP. To remove the display, press the STATUS/EXIT button.

• If you start a recording after you set the Sleep Timer, the Sleep Timer will be cancelled.

Helpful Hints

Press the PLAY/oobutton or the STOP/ppbutton to select SLEEP. Then press the REW(ind)/s button or the F.FWD/B button to select 30 MIN(utes), 60 MIN(utes), 90 MIN(utes), or 120 MIN(utes). (You can not set the sleep

timer during a recording.)

Press the STATUS/EXIT button. The TV/VCR will shut itself

off after the specified amount of time. One minute before the TV/VCR shuts itself off, the seconds will count down on the screen. GOOD NIGHT appears on the TV/VCR screen 10 seconds before the TV/VCR shuts itself off.

TO ADJUST PRESS ss/

–TIMER–

> SLEEP

WAKE UP ON-TIME

OFF

TO ADJUST PRESS ss/

–TIMER–

SLEEP WAKE UP ON-TIME

30 MIN

Sleep Timer 47

Use the sleep timer to program the TV/VCRto shut off in a certain amount of time.

EJECT

1 2 3

4 5 6

7 8 9

SLEEP/

WAKE UP

REC /OTR

REW

CH. VOL.

TRACKING

POWER

STATUS/EXIT

PLAY

STOP

MUTE

SPEED

MEMORY

CLEAR

ALT.CH

PAUSE

/STILL

F.FWD

48 Wake Up Timer

2-3

The Wake Up Timer turns on the TV/VCR automatically at a specified time within the next 24 hours. You may set the TV/VCR to turn on at a TV channel (the channel at which the TV/VCR was set last) or with VCR playback. To set the Wake Up Timer, follow the steps below. Before you begin:

● Set the clock. If the clock is not set, CLOCK MUST BE SET will

appear on the screen after you select WAKE UP at step 2. Then the SET CLOCK menu will appear. Details are on pages 12-17.

● Put a tape in the TV/VCR if you want the TV/VCR to start tape

playback at the specified time.

● Make sure no timer recordings are set for the time at which you

want the TV/VCR power to come on.

Press the SLEEP/WAKE UP button.

• To cancel the Wake Up Timer, press the SLEEP/WAKE UP button. Press the PLAY/o button or the STOP/ p button to select WAKE UP. Then, press the REW(ind)/ssbutton or the F.FWD/BBbutton to select OFF. Press the STATUS/EXIT button.

Helpful Hint

Press the PLAY/oobutton or the STOP/ppbutton to select WAKE UP. Then, press the REW(ind)/ssbutton or the F.FWD/BBbutton to select TV ON or VCR ON.

Press the STATUS/EXIT button.

Press the POWER button to turn off the TV/VCR. The TV/VCR will turn itself on at the specified time.

TO ADJUST PRESS ss/

–TIMER–

> SLEEP

WAKE UP ON-TIME

OFF

TO ADJUST PRESS ss/

–TIMER–

SLEEP

> WAKE UP

ON-TIME

TV ON

Press the PLAY/oobutton or the STOP/ppbutton to select ON-TIME. Then, press the REW(ind)/ssbutton or the F.FWD/BBbutton to select your desired wake up time. Each

press of the REW(ind)/ssbutton or the F.FWD/BBbutton will increase (or decrease) the time by 10 minutes.

TO ADJUST PRESS ss/

–TIMER–

SLEEP WAKE UP

> ON-TIME

12:00 AM

EJECT

SLEEP/

WAKE UP

CH. VOL.

POWER

STATUS/EXIT

1 2 3

4 5 6

7 8 9

REC

/OTR

PLAY

REW

F.FWD

STOP

MUTE

SPEED

TRACKING

MEMORY

CLEAR

ALT.CH

PAUSE

/STILL

Usually, the volume bar appears when you press the VOL(ume)

o/p buttons. If you do not need it, set the VOLUME BAR to

OFF. For example, when you watch a program that is being broadcast with closed captions, you may choose to set the VOLUME BAR to OFF so the captions can remain on the screen. The captions will remain on the screen even when you press the VOL(ume) o/p buttons or the MUTE button.

Volume Bar 49

Press the PLAY/▲ button or the STOP/▼ button to select VOLUME BAR, then press the F.FWD/B button. Each

press of the F.FWD/B button will turn the VOLUME BAR ON or OFF.

Press the STATUS/EXIT button.

Press the MENU button.

Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP. Then, press the F.FWD/B button.

PRIMARY SETUP

> SELECT LANGUAGE

AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [OFF] SET CLOCK

SELECT KL CHOOSE B TO END PRESS EXIT

> PRIM. SETUP

VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS

PRESS B

2-3

PRIMARY SETUP

SELECT LANGUAGE AUTO PROGRAMMING CH MEMORY REVIEW

> VOLUME BAR [ON]

SET CLOCK

SELECT KL CHOOSE B TO END PRESS EXIT

EJECT

SLEEP/

WAKE UP

CH. VOL.

POWER

STATUS/EXIT

1 2 3

4 5 6

7 8 9

REC /OTR

PLAY

REW

F.FWD

STOP

MUTE

SPEED

TRACKING

MEMORY

CLEAR

ALT.CH

PAUSE

/STILL

When you watch a program that has closed captions, you can access on-screen boxes containing the program’s dialogue (for example, what a character is saying), dialogue in a foreign language, or information (such as a channel guide, schedule, or announcements). Follow the steps below to select closed captions. Not all TV programs and commercials have closed captions. Similarly, all types of closed captions (second language, half-screen text, etc.) are not always broadcast. If closed captioning is not broadcast, you cannot receive it. This does not indicate a problem with the TV/VCR. Refer to your area’s TV program listings for shows with closed captions.

Press the MENU button.

Press the PLAY/▲ button or the STOP/▼ button to select CAPTION.

Press the REW(ind)/{ button or the F.FWD/B button to select your desired closed caption mode.

The selected closed caption mode will appear beside CAPTION on the screen.

● CAPTION1 displays standard closed captions (what a character

is saying).

● CAPTION2 displays foreign language closed captions (foreign

language words showing what a character is saying).

● TEXT1 and TEXT2 display half-screen text (such as a channel

guide, schedule, or announcement).

● OFF turns off closed captions. Captions will not appear on the

screen.

TO ADJUST PRESS { / B

> CAPTION

REMINDER BRIGHTNESS PICTURE COLOR TINT

CAPTION1

Example: CAPTION1 Menu Screen

50 Closed Caption

> PRIM. SETUP

VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS

PRESS B

TO ADJUST PRESS { / B

> CAPTION

REMINDER BRIGHTNESS PICTURE COLOR TINT

OFF

2-3

EJECT

SLEEP/

WAKE UP

CH. VOL.

POWER

STATUS/EXIT

1 2 3

4 5 6

7 8 9

REC /OTR

PLAY

REW

F.FWD

STOP

MUTE

SPEED

TRACKING

MEMORY

CLEAR

ALT.CH

PAUSE

/STILL

Closed Caption (cont’d) 51

• You cannot view closed captions during recording or tape playback if COUNTER ONLY is ON. Details are on page 26.

• Abbreviations, symbols, and other grammatical shortcuts are often used in order to keep pace with the onscreen action. This does not indicate a problem with the TV/VCR.

• To cancel closed captions, follow steps 1-2 on page 50. At step 3, press the REW(ind)/{ button or the F.FWD/B button to select OFF. Press the STATUS/EXIT button.

• When you change channels, the closed captions may be delayed for a few seconds.

• When you adjust the volume or mute the volume, closed captions may be delayed for a few seconds. Details are on page 49.

Helpful Hints

HELLOHELLO

WORLD WEATHERWORLD WEATHER

NYLNYL LOSLOS LONDONLONDON

CLOUDCLOUD RAINRAIN CLOUDCLOUD

5 C 5 C 8 C 8 C 7 C 7 C

23:0023:00 20:0020:00 4:00 4:00

Standard Closed Captions

Half-screen text

Press the STATUS/EXIT button. The type of closed captions

you selected at step 3 will appear on the screen.

EJECT

SLEEP/

WAKE UP

CH. VOL.

POWER

STATUS/EXIT

1 2 3

4 5 6

REW

PLAY

F.FWD

STOP

MUTE

SPEED

MEMORY

7 8 9

REC /OTR

TRACKING

CLEAR

ALT.CH

PAUSE

/STILL

52 Automatic Operation Features

The following playback features will always operate.

Automatic Playback

When you put a tape in the TV/VCR, the power will come on automatically. If the tape’s record tab is missing, playback will begin. If a timer recording is set, the power will not come on automatically when you insert a tape with the record tab intact. If a timer recording is set and the TV/VCR power is off, the TV/VCR will eject the tape if the record tab is missing.

Automatic Rewind, Eject, Off

When you play, fast forward, or record a tape to its end, the TV/VCR will rewind the tape, stop, turn itself off, and eject the tape. If a real-time counter memory is set, the TV/VCR may only rewind the tape to the point at which the real-time counter is set to zero. The TV/VCR will not turn itself off or eject the tape.

Memory Rewind, Power Off

When you press the POWER button while the TV/VCR is rewinding a tape, REW → POWER OFF will appear on the screen. The TV/VCR will turn itself off when the tape has finished rewinding. If a real-time counter memory is set, the TV/VCR may only rewind the tape to the point at which the counter was set to zero, then turn itself off.

Tape Eject

A tape can be ejected with the TV/VCR power on or off (but the TV/VCR must be plugged in). If a timer recording is programmed, a tape can not be ejected when the power is off. Turn on the TV/VCR power, then eject the tape. Be sure to insert a tape and turn off the TV/VCR power for the timer recording.

Automatic Tracking Adjustment

The TV/VCR automatically adjusts the tracking to give you the best possible picture quality. With some recordings, however, you may get a better picture using the manual tracking controls (see below).

Manual Tracking

To adjust the tracking manually, press the CHANNEL o/p buttons on the TV/VCR or the TRACKING o/p buttons on the remote control during playback. Tracking returns to Automatic Tracking Adjustment when a tape is inserted or when the STOP/p button is pressed.

Before

Tracking

Adjustment

After

Tracking

Adjustment

AUDIO In Jack: jack on the front of the TV/VCR which is used to record audio from another source.

Automatic Channel Setup:

process in which the TV/VCR memorizes all available channels. Then, when you push the CH(annel) o/p buttons, you only scan through channels you receive.

Bands:

settings that allow you to tune channels.

• Antenna – VHF (very high frequency; channels

2-13) and UHF (ultra high frequency; channels 14-69).

• Cable – all standard channels can be received without a Cable

Box.

Brightness:

adjusting increases or decreases the brightness of

the color on the screen.

Color

: adjusting pales or brightens the TV/VCR color.

Dubbing:

copying a tape using a VCR.

HQ:

high quality; a feature in the TV/VCR circuitry which pro-

vides enhanced picture detail.

Line Input:

The channel to which you set your TV/VCR during

dubbing. The line input channel is always channel 00 (A/V IN).

Mode:

a TV/VCR operation.

OTR:

One-Touch Recording; a timed recording that starts immediately and records for 30 minutes to eight hours, whichever you specify.

Picture:

adjusting increases or decreases the contrast of the pic-

ture on the screen.

Sharpness:

adjusting softens or clarifies the picture on the screen.

Tape Speeds:

how fast the tape travels during playback or

recording.

• SP (standard play) – fastest tape speed (recording time for a

T120 tape is approximately two hours); best picture quality.

• LP (long play) – average tape speed; playback only.

• SLP (super long play) – slowest tape speed (recording time for

a T120 tape is approximately six hours).

Tint

: adjusting changes the tints of the picture on the TV/VCR

from purple to green.

VIDEO In Jack:

jack on the front of the TV/VCR which is used

to record video from another source.

Glossary 53

54 Helpful Hints

Location

For safe operation and satisfactory performance of your TV/VCR, remember the following:

• Shield it from direct sunlight and keep it away from sources of intense heat.

• Avoid dusty or humid places.

• Avoid places with insufficient ventilation. Do not block the ventilation openings at the top and bottom of the TV/VCR. Do not place the TV/VCR on a carpet, as this will block the ventilation openings.

• Avoid locations subject to strong vibrations.

• Do not place the TV/VCR near strong magnetic fields.

• Do not move the TV/VCR from a cold place to a hot place, or vice versa.

Electrical Shock and Fire Hazards

• Do not handle the power cord with wet hands.

• Do not pull the power cord when disconnecting the TV/VCR from the AC (alternating current) wall outlet. Grasp it by the plug.

• If you spill water on the TV/VCR, unplug the power cord immediately and take the TV/VCR to an authorized service center.

• Do not put your fingers or objects into the TV/VCR cassette compartment.

• Do not place anything on top of the TV/VCR.

Dew Warning (Moisture Condensation)

• Moisture may condense inside the unit when you move it from a cold place to a warm place, after heating a cold room, or when the humidity is high. There is no warning that moisture is in your TV/VCR. Playing a tape in a TV/VCR in which moisture has accumulated could damage the tape and the TV/VCR. If you suspect moisture inside the TV/VCR, keep the TV/VCR power on (but do not play a tape) for at least two hours. This will allow the TV/VCR to dry.

TV/VCR will not perform a timer recording.

• Set the recording start and stop times correctly. Details are on pages 32-35. Midnight is 12 a.m. Noon is 12 p.m.

• Make sure the TV/VCR power is off.

• Set the clock. Details are on pages 12-17.

• Put a tape in the TV/VCR. The tape must have a record tab.

• Make sure DEFEAT RECORDING is set to OFF. Details are on page 36.

TV/VCR will not record.

• Make sure the tape has a record tab. Details are on page five.

• Make sure DEFEAT RECORDING is OFF. Details are on page 36.

• Plug the power cord into an active AC outlet. Details are on page seven.

• Check your hookups. Details are on pages six-seven.

• Set up the channels. Details are on page 10.

Channel reception is poor.

• Check connections, then set up the channels again. Details are on page 10.

If you are having problems with your product, check this list of problems and possible solutions before requesting service. You may be able to solve the problem yourself. If you need to call a customer service representative, please know the model number and serial number of your product before you call. This information is on the back of the product. Also, please take a moment to identify the problem you are having, and be prepared to explain this to the representative. If the representative will need to help you with operations, please stay near the product. Our representatives will be happy to assist you.

Helpful Hints (cont’d) 55

The remote control is not available, or the remote control will not access the menu.

• Use the buttons on the front of the TV/VCR to access the menu. You can not enter numbers (for example, to program a timer recording) using the front panel buttons. Details are on page 20.

TV/VCR has no power.

• Connect the power plug to an AC (alternating current) outlet completely.

TV/VCR power shuts off after 15 minutes.

• To save energy, the TV/VCR will shut itself off after 15 minutes when it is on a channel that is not receiving a broadcast signal (for example, a station that has gone off the air for the night). This is normal.

TV/VCR does not have a picture.

• Adjust the antenna. Details are on page six.

• Adjust the TV/VCR picture controls. Details are on pages 24-25.

• Select an active channel.

TV/VCR has poor sound or no sound.

• Adjust the volume.

• Press the MUTE button to restore the volume.

Tape playback is poor or tape is destroyed.

• Adjust the tracking. Details are on page 52.

• If moisture has accumulated in your TV/VCR, keep the power on for at least two hours, but do not try to play a tape. Details are on page 54.

TV/VCR does not display closed captions.

• Make sure COUNTER ONLY is OFF. Details are on page 26.

• Make sure closed captioning is available for the program. Refer to the TV listings in your local newspaper.

Remote control does not operate TV/VCR.

• Aim the remote control directly at the TV/VCR’s remote sensor. Details are on pages five and 20.

• Remove all obstacles between the remote control and the TV/VCR.

• Inspect and replace the batteries in the remote control. Details are on page five.

Number buttons will not select channels above 69.

• Enter channel numbers as a two-digit number. If you want to select channels 100 and above, enter channel numbers as a three-digit number. Details are on page 22.

• If you are using an antenna, only channels 2-69 will be available. Details are on pages 10-11.

You can not insert a tape into the TV/VCR.

• Insert the tape window side up, with the record tab facing you.

• Make sure a tape isn’t already in the TV/VCR by pressing the STOP/EJECT button on the TV/VCR.

• Gently push on the center of the tape. Never force a tape into the TV/VCR.

• If you have set a timer recording and the TV/VCR power is off, the TV/VCR will eject the tape if the record tab is missing.

You can not remove the tape from the TV/VCR.

• Make sure the power plug is completely connected to an AC (alternating current) outlet.

• If a timer recording is programmed, turn on the TV/VCR power, then eject the tape. Be sure to insert a tape and turn off the TV/VCR power for the timer recording.

TV/VCR ejects the tape when you try to start a recording.

• Make sure the tape has a record tab. Details are on page five.

The cylinder rotates when tape playback is stopped.

• To enable the quick play mechanism, the cylinder will rotate for about five minutes. This is normal. The quick play mechanism switches the tape mechanism from Stop to Play in just one second.

General

CRT: 13-inch in line gun (CC13C1MG)

19-inch in line gun (CC19C1MG) Television system: NTSC-M Closed caption system: Section 15.119, FCC

(Federal Communications Commission) Standard Video Heads: Two heads Tape width: 1/2 inch (12.65 mm) Tape speed

SP: 33.35 mm/sec. LP: 16.67 mm/sec.

SLP: 11.12 mm/sec. Operating Temperature: 41˚F (5˚C) to 104˚F (40˚C) Relative Humidity: 10% to 75% Power requirement: AC 120V, 60Hz Power consumption: 65W (CC13C1MG)

90W (CC19C1MG) Sound output: 1W Dimensions:

15-3/4" (H) x 15-3/16" (W) x 14-13/16" (D)

(CC13C1MG)

400mm x 386mm x 377mm 19-11/16" (H) x 19-7/16" (W) x 18-5/16" (D)

(CC19C1MG)

500mm x 494mm x 465mm Weight: 24.3 lbs (11.0 kg) (CC13C1MG) Weight: 44.1 lbs (20.0 kg) (CC19C1MG)

Tuner Broadcast Channels

VHF 2-13, UHF 14-69

Cable TV Channels

1-125

Terminals

Antenna In: VHF/UHF 75 ohms unbalanced Video In: RCA connector Audio In: RCA connector Earphone: 3.5 mm CES

Electrical Specifications

Video input level: 0.5~2.0Vp-p Audio input level: -10dBv Video S/N ratio

SP: More than 42dBµ

Audio S/N ratio

SP: More than 38dB

Designs and specifications are subject to change without notice and without our legal obligation.

56 Specifications

Limited Warranty 57

WHO IS COVERED?

You must have proof of purchase to receive warranty service. A sales receipt or other document showing that you purchased the product is considered proof of purchase.

WHAT IS COVERED?

Warranty coverage begins the day you buy your product. For 90 days thereafter, all parts will be repaired or replaced, and labor is free. From 90 days to one year from the day of purchase, all parts will be repaired or replaced, but you pay for all labor charges. From one to two years from the day of pur- chase, you pay for the replacement or repair of all parts except the picture tube, and for all labor charges. After two years from the day of purchase, you pay for the replacement or repair of all parts, and for all labor charges.

All parts, including repaired and replaced parts, are covered only for the original warranty period. When the warranty on the product expires, the warranty on all replaced and repaired parts also expires.

WHAT IS EXCLUDED?

Your warranty does not cover:

• labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or repair of antenna systems outside of the product.

• product repair and/or part replacement because of misuse, accident, unauthorized repair or other cause not within the control of Philips Consumer Electronics.

• reception problems caused by signal conditions or cable or antenna systems outside the unit.

• a product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications.

• incidental or consequential damages resulting from the product. (Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. This includes, but is not limited to, prerecorded material, whether copyrighted or not copyrighted.)

• damage caused by the use of non-VHS tapes or tapes that have not been tested and labeled for use in two, four, six, and eight hour VHS recorders.

• a product that is used for commercial or institutional purposes.

WHERE IS SERVICE AVAILABLE?

Warranty service is available in all countries where the product is officially distributed by Philips Consumer Electronics. In countries where Philips Consumer Electronics does not distribute the prod-

uct, the local Philips service organization will attempt to provide service (although there may be a delay if the appropriate spare parts and technical manual(s) are not readily available).

MAKE SURE YOU KEEP...

Please keep your sales receipt or other document showing proof of purchase. Attach it to this owner’s manual and keep both nearby. Also keep the original box and packing material in case you need to return your product.

BEFORE REQUESTING SERVICE...

Please check your owner’s manual before requesting service. Adjustments of the controls discussed there may save you a service call.

TO GET WARRANTY SERVICE IN U.S.A., PUERTO RICO OR U.S. VIRGIN ISLANDS...

Take the product to a Philips factory service center (see enclosed list) or authorized service center for repair. When the product has been repaired, you must pick up the unit at the center. Centers may keep defective parts.

(In U.S.A., Puerto Rico and U.S. Virgin Islands, all implied warranties, including implied warranties of merchantability and fitness for a particular purpose, are limited in duration to the duration of this express warranty. But, because some states do not allow limitations on how long an implied warranty may last, this limitation may not apply to you.)

TO GET WARRANTY SERVICE IN CANADA...

Please contact Philips at:

1-800-661-6162 (French Speaking) 1-800-363-7278 (English Speaking)

(In Canada, this warranty is given in lieu of all other warranties. No other warranties are expressed or implied, including any implied warranties of merchantability or fitness for a particular purpose. Philips is not liable under any circumstances for any direct, indirect, special, incidental or consequential damages, howsoever incurred, even if notified of the possibility of such damages.)

REMEMBER...

Please record below the model and serial numbers found on the product. Also, please fill out and mail your warranty registration card promptly. It will be easier for us to notify you if necessary.

MODEL # __________________________________ SERIAL # __________________________________

This warranty gives you specific legal rights. You may have other rights which vary from state to state.

TV/VCR COMBINATION

90 Days Free Labor/One Year Free Parts Exchange (Two Years Free Exchange on Color Picture Tube)

This product must be carried in for repair.

Philips Service Solutions Group, P.O. Box 2976, Longview, Texas 75606, (903) 242-4800

EL4963E006 / MAC 6108/ 03-00

a-b repeat play . . . . . . . . .38-39

accessories . . . . . . . . . . . . . . .60

ant(enna) jack . . . . . . . . . . .6, 21

audio in jack . . . . . . . . .7, 20, 31

automatic

playback . . . . . . . . . . . . . . .52

rewind . . . . . . . . . . . . . . . .52

batteries . . . . . . . . . . . . . . . . . .5

blue background . . . . . . . . . . .46

brightness, adjusting . . . . .24-25

channel

above 100 . . . . . . . . . . . . .22

adding . . . . . . . . . . . . . . . .11

buttons . . . . . . . . . .20, 23, 52

deleting . . . . . . . . . . . . . . .11

reviewing . . . . . . . . . . . . . .11

setup . . . . . . . . . . . . . . . . .10

clear button . . . . . . . . . . . . . .22

clock . . . . . . . . . . . . . . . . .12-17

closed caption system . . . .50-51

color, adjusting . . . . . . . . .24-25

connections . . . . . . . . . . .6-7, 31

contents, table of . . . . . . . . . . .4

controls

remote . . . . . . . . . . . . .22-23

tv/vcr . . . . . . . . . . . . . . . . .20

counter only mode . . . . . . . . .26

daylight-savings time . . . . . . . .18

defeat recording . . . . . . . . . . .36

duplication . . . . . . . . . . . . . . .31

earphone jack . . . . . . . . . . . . .20

eject button . . . . . . . . . . . . . .22

fast forward search . . . . . . . . .41

f.fwd/B button . . . . . . . . .22, 41

f.fwd button . . . . . . . . . . . . . .20

front panel . . . . . . . . . . . . . . .20

glossary . . . . . . . . . . . . . . . . .53

helpful hints . . . . . . . . . . . .54-55

hookups . . . . . . . . . . . . .6-7, 31

language selection . . . . . . . . . . .9

line input mode . . . .7, 10, 31, 53

long play . . . . . . . . . . . . . .29, 53

lp . . . . . . . . . . . . . . . . . .29, 53

memory

button . . . . . . . . . . .23, 39-40

real-time counter . . . . . . . .40

rewind, power off . . . . . . .52

button . . . . . . . . . . . . . . . .23

front panel button access . .20

mute button . . . . . . . . . . . . . .22

number buttons . . . . . . . . . . .22

one-touch recording . . . . . . . .30

pause/still button . . . . . . .23, 41

picture, adjusting . . . . . . . .24-25

play button . . . . . . . . . . . .20, 22

playback options . . . . . . . . . . .41

playing . . . . . . . . . . . . . . . . . .28

power

button . . . . . . . . . . . . .20, 22

cord . . . . . . . . . . . . . . . .7, 21

real-time counter memory . . .40

rear panel . . . . . . . . . . . . . . . .21

rec/otr button . . . . . . . . .20, 23

record light . . . . . . . . . . . . . .20

recording . . . . . . . . . . . . . . . .29

recording prevention . . . . . . . .5

reminder . . . . . . . . . . . . . . . .27

remote

control

buttons . . . . . . . . . .22-23

using . . . . . . . . . . . . . . . .5

sensor . . . . . . . . . . . . . . . .20

repeat play . . . . . . . . . . . . . . .37

rerecording . . . . . . . . . . . . . .31

rew(ind) button . . . . . . . . . . .20

rew(ind)/{ button . . . . . .23, 41

rewinding . . . . . . . . . . . . . . . .41

safety precautions . . . . . . . . . .3

searching . . . . . . . . . . . . . . . .41

sensor (remote) . . . . . . . . . . .20

sharpness, adjusting . . . . . .24-25

showguard . . . . . . . . .32, 35, 54

sleep timer . . . . . . . . . . . . . . .47

slp . . . . . . . . . . . . . . . . . .29, 53

smartclock . . . . . . . . . . . . .14-17

smartlock . . . . . . . . . . . . .42-45

sp . . . . . . . . . . . . . . . . . .29, 53

specifications . . . . . . . . . . . . .56

sqpb . . . . . . . . . . . . . . . . . . . .28

standard play . . . . . . . . . .29, 53

status display . . . . . . . . . . . . .26

status/exit button . . . . . . .23, 26

still picture . . . . . . . . . . . . . . .41

stop/p button . . . . . . . . . . . .23

stop/eject button . . . . . . . . . .20

super high speed searching . . .41

super long play . . . . . . . . .29, 53

table of contents . . . . . . . . . . .4

tape

duplication . . . . . . . . . . . . .31

speed . . . . . . . . . . . . . .29, 53

time

setting . . . . . . . . . . . . . .12-17

zone . . . . . . . . . . . . . . . . . .19

timer recording

cancelling . . . . . . . . . . . . . .35

reviewing . . . . . . . . . . . . . .35

setting . . . . . . . . . . . . . .32-34

tint, adjusting . . . . . . . . . . .24-25

tracking . . . . . . . . . . . . . . . . .52

video in jack . . . . . . . . .7, 20, 31

volume bar . . . . . . . . . . . . . . .49

wake up timer . . . . . . . . . . . .48

warranty . . . . . . . . . . . . . . . . .57

58 Index

IB8274E001

Printed In Malaysia

0EMN01769 / T5213UP * * * * *

SUPPLIED ACCESSORIES

OPTIONAL ACCESSORIES

The following items are supplied with your TV/VCR; they are provided to help you use or set up your TV/VCR.

The following additional items are not provided with your TV/VCR, but they are designed for use with your new TV/VCR. To order these optional accessories, contact us at:

Philips Parts & Accessories Marketing Department

401 East Old Andrew Johnson Highway

P.O. Box 555

Jefferson City, TN 37760

1-800-851-8885.

VHS Cassette Rewinder

#M61117

Three Cassette Storage Cases (plastic)

Fits VHS and Beta cassettes

#M61104

Six High-grade, VHS, T-120 Cassettes

#MHG1206

Monaural Audio and Video Cables (6 feet)

Color-coded for easy connection

#M61103

As an ENERGY STAR®Partner, Philips Consumer Electronics has determined that this product meets the E

NERGY STAR

guidelines for energy efficiency.

NERGY STAR

is a U.S. registered mark.

This owner’s manual is made of recycled paper.

Remote Control for CC13C1MG and CC19C1MG 4835 218 37311

Two AA Batteries 4835 138 17012

Magnavox CC13C1MG, CC19C1MG User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual