Magnavox BZV420MW8 User Manual

Download

Page 1

Owner's Manual

BZV420MW8

IGITAL VIDEO DISC RECORDER WITH

IDEO CASSETTE RECORDER

Introduction

Connections Basic Setup Function Setup VCR Functions

THANK YOU FOR CHOOSING MAGNAVOX.

EED HELP FAST?

READ YOUR QUICK GUIDE AND/OR OWNER'S MANUAL FIRST FOR QUICK TIPS THAT MAKE USING

YOUR MAGNAVOX PRODUCT MORE ENJOYABLE.

IF YOU HAVE READ YOUR INSTRUCTIONS AND STILL NEED ASSISTANCE,

YOU MAY ACCESS OUR ONLINE HELP AT HTTP://WWW.FUNAI-CORP.COM

OR CALL 1-800-605-8610 WHILE WITH YOUR PRODUCT.

INSTRUCCIONES EN ESPAÑOL INCLUIDAS.

Recording Playback Editing

Others Español

Page 2

OUT IN

DVD

DIGITAL

AUDIO OUT

AUDIO

OUT

S-VIDEO

/CB

PR /CR

RLR

S-VIDEO IN --- AUDIO --- OUT

IN --- VI D E O --- OUT

COMPONENT

VIDEO OUT

DVD/VCR

rear of your TV

external tuner

ANT. IN

rear of this unit

AUDIO IN

VIDEO IN

AUDIO OUT

VIDEO

OUT

S-VIDEO

OUT

RF coaxial cable

e.g.)

TV signal

S-VIDEO IN --- AUDIO --- OUT

IN --- VIDEO --- OUT

DVD/VCR

RCA audio cable

RCA video cable

S-video cable

RF coaxial cable

STANDBY-ON

TIMER SET

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACETIMER CLEAR

SETUPDISC MENU

RETURNTITLE

TRACKING

VCR DVD

AUDIOREC

REC MODE D.DUBBING

CM SKIP

SEARCH RAPID PLAY

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

General Setting

Playback Display Video Recording Clock Reset All

Progressive Scan TV Aspect Video Input

Video Input

E1 (Rear) E2 (Front)

General Setting

Playback Display Video Recording Clock Reset All

Progressive Scan TV Aspect Video Input

Video Input

E1 (Rear) E2 (Front)

E1 (Rear)

Video In S-Video In

DIGITAL VIDEO DISC RECORDER WITH

VIDEO CASSETTE RECORDER

BZV420MW8

Connection to an External Tuner

1) Disconnect the power cords of the devices from the AC outlet.

2) Make the connection as illustrated below.

Connections

Playable Discs

DVD-video

DVD+RW

DVD+R

DVD-RW (Finalized video mode discs only)

DVD-R (Finalized video mode discs only)

is a trademark of DVD Format/Logo Licensing Corporation.

Region Codes

This unit is compatible to play back the following discs / files.

LogosPlayable discs LogosPlayable discs

CD-DA (audio CD)

video CD

CD-RW

CD-R

CD-DA

MP3

MediaPlayable les

CD-RW/-R

3) Plug in the power cords of the devices to the AC outlet.

How to Select External Input Channel on Your TV

After you have completed the connections, switch the input selector on your TV to an appropriate external input channel. Press a button on the TV’s original remote control that selects an external input channel repeatedly until the DVD recorder’s opening picture appears. Check your TV owner’s manual for details.

Settings for the Video Input

You must let the unit know which video input jack you are using before making a recording.

Press [SETUP] and use [K / L] to select “General Setting”, then press [OK].

The number inside the globe refers to region of the world. This unit can playback DVD that are labeled for ALL regions or for Region 1.

Recordable Discs

•

Following discs are recommended for good recording quality and

are proven to be compatible with this unit. However, depending on the media condition the unit may not read the disc properly.

Verbatim DVD+R 8x, DVD+RW 4x, DVD-R 8x, DVD-RW 2x JVC DVD-RW 4x Maxell DVD+R 4x/8x/16x, DVD-R 8x/16x SONY DVD+R 4x/8x/16x, DVD+RW 4x TDK DVD+R 4x/8x/16x

Performance of any other discs are not guaranteed.

• You can play back DVD+RW on most DVD players without

finalizing. However, if you have added or deleted chapters, or made chapters hidden, you must perform “Make Edits Compatible” before being able to see those effects on other units. (Refer to page 67 in the owner's manual.) To play back discs other than DVD+RW on other DVD players, you will need to finalize.

Unrecordable Discs

Use [K / L] to select “Video”, then press [OK].

This unit can record to DVD+RW, DVD+R, DVD-RW and DVD-R. DVD+R/DVD-R can only be recorded to once. DVD+RW/DVD-RW can be recorded to and erased many times.

DVD-RW/-R will be recorded in the DVD+VR mode automatically in this unit.

SETUP

Logo

Attributes

8cm/12cm, single-sided,

DVD+RW DVD+R

DVD-RW

DVD-R

• DVD-RW recorded in the mode other than +VR is not recordable on this unit unless you erase all contents in the disc. (Refer to page 66 in the owner's manual.)

• DVD-R recorded in the mode other than +VR is not recordable on this unit.

single layer disc Approx. max. recording time (SLP mode): 360 minutes (4.7GB) (for 12cm) 108 minutes (1.4GB) (for 8cm)

Use [K / L] to select “Video Input”, then press [OK].

Use [K / L] to select desired external input position, then press [OK].

Use [K / L] to select the input jack type to connect, then press [OK].

Press [SETUP] to exit.

Follow to the back side of this sheet.

Page 3

0:30

2 Initial Setting

Initial Setup

OSD Language

English

Français

Español

SP(2Hr) 0:58

Initial Setup

Clock Setting

- - - / - - / - - - - ( - - - )

- - : - - - -

Initial Setup

Clock Setting

JAN / 01 / 2007 ( MON )

12 : 00 AM

STANDBY-ON

TIMER SET

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACETIMER CLEAR

SETUPDISC MENU

RETURNTITLE

TRACKING

VCR DVD

AUDIOREC

REC MODE D.DUBBING

CM SKIP

SEARCH RAPID PLAY

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

Timer Programming

MON JAN/01 11:00AM

Date Start End E1/E2 New Program

STANDBY-ON

TIMER SET

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACETIMER CLEAR

SETUPDISC MENU

RETURNTITLE

TRACKING

VCR DVD

AUDIOREC

REC MODE D.DUBBING

CM SKIP

SEARCH RAPID PLAY

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

NB552

STANDBY-ON

TIMER SET

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACETIMER CLEAR

SETUPDISC MENU

RETURNTITLE

TRACKING

PQRS

SOURCE

123

456

+--

iji

DISPLAY OPEN/CLOSE

STANDBY-ON

3 – 2 Timer Recording

You need to follow these steps when you turn on this unit for the first time.

Press [STANDBY-ON y].

Turn the TV on. Select the input to which the unit

is connected.

Use [K / L] to select your desired language, then press [OK] to set language.

s B

Press [OK] to activate “Clock Setting”.

Use [{ / B] to select an item to set, and use [K / L] to select the contents to suit your preference, then press [OK].

You can program the unit to record up to 12 programs within a month in advance. Daily or weekly program recordings are also available.

Before recording, make sure

• Connect the external tuner to either E1 or E2 and set it to output audio/video signals when it comes to the time you want to start recording.

• Do not change the external tuner’s channel while you are recording. You cannot watch one channel and record another at the same time.

• Set the clock before setting a timer programming.

• Insert a recordable disc with enough recordable space.

Press [TIMER].

1 2

Use [K / L] to select “New Program”, then press [OK].

Set a timer programming.

TIMER SET

TIMER

3 DVD Recording

3 – 1 Basic Recording

Press [DVD].

Press [OPEN/CLOSE A] to open the disc tray

and insert your disc with its label facing up.

* Make sure the disc is compatible with this unit. (Refer to page 21 in

the owner's manual for the list of compatible discs.)

Press [REC MODE] to select a recording mode.

Press [SOURCE] to select the appropriate external

input position (E1/E2) to which your external tuner is connected. Then select the desired channel to record on the external tuner.

Press [REC I] to start recording.

Press [STOP C] to stop recording.

Recording

mode

HQ (1Hr)

SP (2Hr)

SPP (2.5Hr)

LP (3Hr) EP (4Hr)

SLP (6Hr)

SOURCE

60 min

Video/sound

quality

Good

Poor

REC

REC MODE

Recording

time

8cm Disc 12cm Disc

18 min 36 min 45 min 54 min 72 min

108 min

120 min 150 min 180 min 240 min 360 min

To set one-touch timer recording (OTR)...

This is a simple way to set the recording time in blocks of 30 minutes. Press [REC I] repeatedly until the desired recording time (30 minutes to 6 hours) appears on the TV screen. One-touch timer recording will start.

• To cancel one-touch timer recording within

the specified time, press [STOP C].

OPEN/CLOSE

DVD

(normal recording)

6:00 5:30

0:30

Press [OK].

4 5

Press [TIMER SET] to set a timer programming.

TIMER REC indicator will light up on the front panel.

Set the date.

Set start and end time.

Select the appropriate external input position

Select a recording media (“DVD” or “VCR”).

Select a recording

mode. (E1/E2) to which your external tuner is connected.

Date

Start

DVD SP

SP 2 : 00

End

- - : - -

Date

Start

- - : - -

DVD SP

SP 2 : 00

End

- - : - -

JAN/02

E1/E2E1REC To Mode

JAN/02

E1/E2E1REC To Mode

12 : 00AM

Date

JAN/02

E1/E2E1REC To Mode

Start

12 : 00AM

DVD SP

End

1 : 00AM

SP 1 : 00

Date

JAN/02

E1/E2E1REC To Mode

Start

12 : 00AM

DVD SP

End

1 : 00AM

SP 1 : 00

Date

JAN/02

12 : 00AM

E1/E2E1REC To Mode

Start

1 : 00AM

DVD SP

SP 1 : 00

End

4 Playback

1:00

Open the disc tray.

OPEN/CLOSE

Insert a disc.

Start playing back.

Stop playing back.

1VMN24194 / E9E2ZUD_QG ★★★★★

Page 4

PRECAUTIONS

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Laser Safety

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS

CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM. LOCATION: INSIDE, NEAR THE DECK MECHANISM.

FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this

equipment may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

RADIO-TV INTERFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and receiver.

3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

The caution marking is located on the rear of the cabinet.

RADIATION EXPOSURE.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION:

POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND

A NOTE ABOUT RECYCLING

This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.

Make your contribution to the environment!!!

• Used up batteries do not belong in the dust bin.

• You can dispose of them at a collection point for used up batteries or special waste. Contact your council for details.

For Customer Use: Read carefully the information located at the back of this unit and enter below the Model No. and Serial No. Retain

this information for future reference. Model No. _____________________ Serial No. _____________________

2EN2EN

Page 5

PRECAUTIONS

Important Safeguards

Introduction

1. Read Instructions - All the safety and operating

instructions should be read before the appliance is operated.

2. Retain Instructions- The safety and operating instructions

should be retained for future reference.

3. Heed Warnings - All warnings on the appliance and in

the operating instructions should be adhered to.

4. Follow Instructions - All operating and use instructions

should be followed.

5. Cleaning - Unplug this product from the wall outlet

before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted

service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5.

6. Attachments - Do not use attachments not

recommended by the product manufacturer as they may cause hazards.

7. Water and Moisture- Do not use this product near water,

for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

8. Accessories - Do not place this product on an unstable

cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the appliance should follow the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

9. Ventilation - Slots and openings in the cabinet are

provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.

10. Power Sources - This product should be operated only

from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

11. Grounding or Polarization - This product is equipped

with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

12. Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

13. Lightning - For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power-line surges.

14. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

15. Overloading - Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

16. Object and Liquid Entry - Never push objects of any kind into this product through any openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

17. Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

18. Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the

product.

c. If the product has been exposed to rain or water. d. If the product does not operate normally by following

the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.

e. If the product has been dropped or damaged in any way.

f. When the product exhibits a distinct change in

performance this indicates a need for service.

19. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

20. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

21. Heat - This product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

Connections Basic Setup Function Setup VCR Functions

Recording Playback Editing

Others Español

3EN 3EN

Page 6

PRECAUTIONS

Installation Location

For safety and optimum performance of this unit:

• Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV.

• Shield it from direct sunlight and keep it away from devices of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes on the sides of the unit. Avoid locations subject to strong vibration or strong magnetic fields.

Avoid the Hazards of Electrical Shock and Fire

• Do not handle the power cord with wet hands.

• Do not pull on the power cord when disconnecting it from AC outlet. Grasp it by the plug.

• If, by accident, water is spilled on this unit, unplug the power cord immediately and take the unit to our Authorized Service Center for servicing.

Moisture Condensation Warning

Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place or after heating a cold room or under conditions of high humidity. Do not use this unit at least for 2 hours until its inside gets dry.

About Copyright

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

Supplied Accessories

remote control (NB552UD) with batteries (AAAx2)

RCA audio/video cables (WPZ0102TM018/WPZ0102LTE01)

owner's manual (1VMN24193)

quick guide (1VMN24194)

Notice for Progressive Scan Output

Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of picture problems with 525 (480) progressive scan output, it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions regarding your TV set compatibility with this 525p (480p) DVD player, please contact our customer service center.

4EN4EN

Page 7

Maintenance

PRECAUTIONS

Introduction

Servicing

• Please refer to relevant topics on “TROUBLESHOOTING” on pages 80-84 before returning the product.

• If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug and please call our help line mentioned on the front page to locate an Authorized Service Center.

Cleaning the cabinet

• Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasive.

Cleaning discs

• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion.

• Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analog records.

Cleaning the disc lens

• If this unit still does not perform properly although you refer to the relevant sections and to “TROUBLESHOOTING” in this owner's manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.

Disc handling

• Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.

• Always store the disc in its protective case when it is not used.

Auto head cleaning

• Automatically cleans video heads as you insert or remove a cassette, so you can see a clear picture.

• Playback picture may become blurred or interrupted while the TV program reception is clear. Dirt accumulated on the video heads after a long period of use, or the usage of rental or worn tapes can cause this problem. If a streaky or snowy picture appears during playback, the video heads in your unit may need to be cleaned.

1. Please visit your local Audio/Video store and purchase a good quality VHS video head cleaner.

2. If a video head cleaner does not solve the problem, please consult your dealer or an Authorized Service Center.

Note

• Remember to read the instructions along with the video

head cleaner before use.

• Clean video heads only when problems occur.

IR signal check

If the remote control does not work properly, you can test if the remote control sends out the infrared signal with AM radio or a digital camera (including built-in camera of cellular phone). It will help to define the cause of malfunction.

• With an AM radio:

Tune an AM radio to a station with no broadcasting. Press a button on remote control toward the radio. Sound will be fluttering when you press any key and the radio receives the signal. This means the remote control is working.

• With a digital camera (including built-in

camera of cellular phone):

Direct a digital camera to remote control, press and hold a button on remote control. If infrared light appears through digital camera, the remote control is working.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

Dolby Digital Recording

“Dolby® Digital Recording enables consumers to record high-quality video with stereo sound on recordable DVD discs. The technology, when utilized instead of PCM recording, also saves recordable disc space, allowing for higher video resolution or extended recording time on each DVD. DVDs created using Dolby Digital Recording will play back on all DVD-video players.” Note: This is true when the players are compatible with actual recordable DVD discs.

Connections Basic Setup Function Setup VCR Functions

Recording Playback Editing

All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes.

with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.

Others Español

5EN 5EN

Page 8

CONTENTS

Introduction

PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Symbols Used in this Owner's Manual . . . . . . . . . . . . . . .7

FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . 8

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Connections

CONNECTION TO AN EXTERNAL TUNER. . . . . . . . . . . 12

SETTINGS FOR THE VIDEO INPUT. . . . . . . . . . . . . . . . . 13

CONNECTION TO A TV . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

CONNECTION TO AN AUDIO SYSTEM . . . . . . . . . . . . . 15

Basic Setup

THE VCR / DVD RECORDER SWITCHING . . . . . . . . . . . 16

GUIDE TO ON-SCREEN DISPLAYS AND MENUS . . . . 17

On-Screen Display / Menu . . . . . . . . . . . . . . . . . . . . . . . . . 17

Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

INITIAL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

SETTING THE CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Clock Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Recording

INFORMATION ON DVD RECORDING . . . . . . . . . . . . . 21

BEFORE RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Make Recording Compatible . . . . . . . . . . . . . . . . . . . . . . 22

Setting for Auto Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . 22

BASIC RECORDING & ONE-TOUCH TIMER

RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

TIMER RECORDING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Hints for Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . 28

SATELLITE LINK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

OVERWRITING UNNECESSARY TITLE . . . . . . . . . . . . . 31

Overwriting from the Beginning of the Title. . . . . . . . 31

Overwriting in the Middle of the Title . . . . . . . . . . . . . . 31

Hints for Overwriting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

EXTERNAL DEVICE RECORDING . . . . . . . . . . . . . . . . . . 33

Connection to an External Device. . . . . . . . . . . . . . . . . . 33

Recording from an External Device . . . . . . . . . . . . . . . . 34

SETTING A DISC TO PROTECT . . . . . . . . . . . . . . . . . . . . 35

PLAYING THE DISCS IN OTHER DVD PLAYERS . . . . . 36

Finalizing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Auto Finalizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

DUBBING MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Playback

INFORMATION ON PLAYBACK . . . . . . . . . . . . . . . . . . . 40

BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Direct Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Playback from the Title List . . . . . . . . . . . . . . . . . . . . . . . . 42

Playing Back an Audio CD and a CD-RW/-R with MP3

Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Using the Title / Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . 45

Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

SPECIAL PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Resume Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Fast Forward / Fast Reverse Playback . . . . . . . . . . . . . . 46

Skipping TV Commercials During Playback. . . . . . . . . 46

Rapid Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Step by Step Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

6EN6EN

Slow Forward / Slow Reverse Playback. . . . . . . . . . . . . 47

Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Marker Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Title / Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Time Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

REPEAT / RANDOM / PROGRAM PLAYBACK . . . . . . . 51

Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Program Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

SELECTING THE FORMAT OF AUDIO AND VIDEO . . 53

Switching Subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Switching Audio Soundtrack . . . . . . . . . . . . . . . . . . . . . . 53

Switching Virtual Surround System . . . . . . . . . . . . . . . . 54

Switching Camera Angles . . . . . . . . . . . . . . . . . . . . . . . . . 54

Reducing Block Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Editing

INFORMATION ON DISC EDITING. . . . . . . . . . . . . . . . . 55

Guide to a Title List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Editing Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

EDITING DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Deleting Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Putting Names on Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Setting Chapter Marks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Clearing Chapter Marks . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Hiding Chapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Setting Pictures for Thumbnails. . . . . . . . . . . . . . . . . . . . 62

Dividing a Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Putting Name on Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Setting or Releasing Disc Protect . . . . . . . . . . . . . . . . . . 65

Erasing Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Making Edits Compatible . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Function Setup

LIST OF SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

SETUPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Reset All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

VCR Functions

VCR FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

One-touch Timer Recording (OTR) . . . . . . . . . . . . . . . . . 78

Index Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Time Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Other Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Others

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . 84

LANGUAGE CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Español

ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . Back cover

Page 9

FEATURES

This unit not only plays back DVD, CD and VCR but also offers features for you to record on DVD and edit them after that. The following features are offered with this unit.

Recording

DVD mode VCR mode

This unit is compatible with DVD+RW/DVD-RW, which is rewritable repeatedly and DVD+R/DVD-R, which is available for recording once. Even if you choose DVD-RW/DVD-R, these discs will automatically be recorded in the DVD+VR mode. Also, this unit allows you to record to the cassette tape. You can choose either one for your convenience.

Up to 12 program recording:

You can program the unit to record up to 12 programs within a one-month period. Daily or weekly program recordings are also available.

One-touch timer recording (OTR):

You can easily set a recording time as you prefer. Every time [RECORD] or [REC I] is pressed during recording, the recording time will be increased by 30 minutes up to 6 hours for DVD, and 8 hours for VCR. The recording automatically stops when the recording time you set is reached or the disc and the cassette tape is full.

Dubbing mode:

You can copy a DVD disc to a cassette tape or copy a cassette tape to a DVD disc. This function will be possible only if the DVD disc or a cassette tape is not copy protected. You cannot record on a tab is removed.

Left channel stereo recording:

This unit can record the sound of the left channel monaural input as left and right channels automatically.

Automatic chapter mark setting:

Chapter marks will be put on recordings as you set before attempting to record.

Automatic title list making:

The unit makes a title list with the index automatically.

cassette tape

when its erase-protection

DVD mode

Playback

Theater surround sound in your home:

When connecting the unit to an amplifier or a decoder which is compatible with Dolby Digital, you can experience the theater surround sound from discs with surround sound system.

Quick search for what you want to watch:

You can easily find the part you want to watch using the search function. Search for a desired point on a disc by title, chapter or time.

Virtual surround system:

You can enjoy stereophonic space through your existing 2 channel stereo system.

Playing back MP3 files:

You can enjoy MP3 files which are recorded on CD-RW/-R.

Quick search for what you want to watch:

You can easily find the part you want to watch using the index search/time search functions. An index mark will be assigned at the beginning of each recording you make. For time search function, you can go to a specific point on a cassette tape by entering the exact amount of time you wish to skip.

DVD mode

VCR mode

Editing

Setting pictures for thumbnails:

You can change pictures for thumbnails.

Dividing titles (DVD+RW/DVD-RW only):

You can divide a title into 2 or more.

Putting name on disc:

You can put your favorite disc name.

Compatibility

DVD mode

Available for playing back discs on a regular DVD player:

Recorded discs can be played back on regular DVD players, including computer DVD drives compatible with DVD-video playback. Although DVD+R are playable on other units without finalization in most cases, it is recommended to finalize in order to stabilize the performance. For DVD-RW/ DVD-R, you need to finalize the recorded discs to play back on other DVD players.

Others

Line through output

When an external device, such as cable/satellite box, is connected to E1(Rear) jacks of this unit, the signal from the external device can be output even when the power of the unit is off.

Progressive scan system

Unlike conventional interlace scanning, the progressive scan system provides less flickering and images in higher resolution than that of traditional television signals.

DVD mode

Symbols Used in this Owner's Manual

To specify for what disc type each function is, we put the following symbols at the beginning of each item to operate. * DVD-RW/-R recorded in VR mode or non compatible

recording format are not playable.

* DVD-RW recorded in the mode other than +VR is not

recordable on this unit unless you erase all contents in the disc (refer to page 66).

* DVD-R recorded in the mode other than +VR is not

recordable on this unit.

Symbol

For Recording, Playing Back, and Editing

For Playback only

Description

Description refers to DVD+RW

Description refers to DVD+R

Description refers to DVD-RW

Description refers to DVD-R

Description refers to VHS tapes Use only cassettes marked VHS ( ).

Description refers to DVD-video

Description refers to audio CD

Introduction

Connections Basic Setup Function Setup VCR Functions

Recording Playback Editing

Others Español

Deleting titles:

You can delete titles which you do not need anymore.

Putting names on titles:

You can put your favorite names on titles.

Setting / clearing chapter marks:

You can set / clear chapter marks on titles.

Hiding chapters:

To keep others from playing back some chapters without permission, you can hide chapters.

DVD mode

Description refers to video CD with PBC function

Description refers to video CD without PBC function

Description refers to CD-RW/-R with MP3 les

If you do not nd any of the symbols listed above under the function heading, the operation is applicable to all media.

7EN 7EN

Page 10

FUNCTIONAL OVERVIEW

Front Panel

1 2* 3

(*) The unit can also be turned on by pressing these buttons or insert a cassette tape.

1. Cassette compartment (VCR)

Insert a cassette tape here.

2. OPEN/CLOSE A button (DVD)*

Press to open or close the disc tray.

3. Disc tray (DVD)

Place a disc when it is open.

4. AUDIO input jacks (E2) (DVD/VCR)

Use to connect external device with an RCA audio

cable.

5. VIDEO input jack (E2) (DVD/VCR)

Use to connect external device with an RCA video

cable.

6. S-VIDEO input jack (E2) (DVD/VCR)

Use to connect the S-video output of external device

with an S-video cable.

7. RECORD button (DVD)

Press once to start recording. Press repeatedly to start the one-touch timer

recording.

8. PLAY B button (DVD)*

Press to start or resume playback.

9. STOP C button (DVD)

Press to stop playback or recording. Press to stop the proceeding timer recording in DVD.

10. DVD indicator

Lights up when the DVD output mode is selected.

11. SOURCE button (DVD/VCR)

Press to select the component you wish to operate.

12. VCR indicator

Lights up when the VCR output mode is selected.

13. D.DUBBING button (DVD/VCR)

Press to start VCR to DVD (DVD to VCR) duplication

which you set in the main menu.

14. TRACKING L / K buttons (VCR)

Press to adjust the tracking during playback or in

slow motion of the cassette tape.

While playback is in still mode, you can adjust the

picture blurred vertically.

15. DVD REC indicator (DVD)

Lights up when recording in progress.

Flashes when a program cannot be performed for some reason.

16. TIMER REC indicator (DVD/VCR)

Lights up when timer programming is set.

Light up during the one-touch timer recording. Flashes when all timer programmings have finished.

17. D.DUBBING indicator (DVD/VCR)

Lights up when recording function works only from

the VCR to DVD mode.

18. VCR REC indicator (VCR)

Lights up when recording in progress.

Flashes when a program cannot be performed for some reason.

19. Infrared sensor window (DVD/VCR)

Receive signals from your remote control so that you

can control the unit from a distance.

20. RECORD button (VCR)

Press once to start a recording. Press repeatedly to

start the one-touch timer recording.

21. PLAY B button (VCR)

Press to start playback.

22. STOP C / EJECT A button (VCR) EJECT A button When the unit is in stop mode, press to remove the

cassette tape from the cassette compartment.

STOP C button Press to stop cassette tape playback or recording. Press to stop the proceeding timer recording in VCR.

23. F.FWD D button (VCR)

Press to rapidly advance the cassette tape, or view the

picture rapidly in forward during playback (forward search).

24. REW E button (VCR)

Press to rewind the cassette tape, or to view the

picture rapidly in reverse during playback (rewind search).

25.

y STANDBY-ON button (DVD/VCR)

Press to turn on and off the unit.

26. POWER ON indicator (DVD/VCR)

Lights up when power is on.

6 5 425 24 13 11 1012 9 8 * 723 22 21 20 19 15161718 1426

8EN8EN

Page 11

Rear Panel

FUNCTIONAL OVERVIEW

Introduction

Connections Basic Setup Function Setup VCR Functions

1. AC Power Cord (DVD/VCR)

Connect to a standard AC outlet to supply power to this

unit.

2. AUDIO OUT jacks (DVD/VCR)

Use to connect a TV monitor, AV receiver or other

device with an RCA audio cable.

3. VIDEO OUT jack (DVD/VCR)

Use to connect a TV monitor, AV receiver or other

device with an RCA video cable.

4. VIDEO IN jack (E1) (DVD/VCR)

Use to connect external device with an RCA video

cable.

5. AUDIO IN jacks (E1) (DVD/VCR)

Use to connect external device with an RCA audio

cable.

6. S-VIDEO IN jack (E1) (DVD/VCR)

Use to connect the S-video output of external device

with an S-video cable.

DIGITAL

AUDIO OUT

COAXIAL

AUDIO

DVD

OUT

S-VIDEO

COMPONENT

VIDEO OUT

OUT IN

DVD/VCR

S-VIDEO I N --- AUDIO --- OUT

/CB

IN --- VIDEO --- OUT

PR /CR

RLR

26810 7 5 349

7. COMPONENT VIDEO OUT jacks (DVD only)

Use to connect a TV monitor with component video

inputs with a component video cable.

8. S-VIDEO OUT jack (DVD only)

Use to connect the S-video input of a TV monitor, AV

receiver or other device with an S-video cable.

9. AUDIO OUT jacks (DVD only)

Use to connect a TV monitor, AV receiver or other

device with an RCA audio cable.

10. COAXIAL DIGITAL AUDIO OUT jack (DVD only)

Use to connect an AV receiver, Dolby Digital decoder

or other device with a coaxial digital input jack with a digital coaxial cable.

Note

• Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.

Recording Playback Editing

9EN 9EN

Others Español

Page 12

Remote Control

FUNCTIONAL OVERVIEW

Installing the Batteries in the Remote Control

Install the batteries (AAAx2) matching the polarity indicated inside battery compartment of the remote control.

Open the cover.

Insert batteries.

Make sure to match + and - on the batteries to the marks indicated in the battery compartment.

Close the cover.

Note

Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following:

• Do not mix new and old batteries together.

• Do not use different kinds of batteries together. Although they may look similar, different batteries may have different voltages.

• Make sure that the + and - ends of each battery match the indications in the battery compartment.

• Remove batteries from battery compartment that is not going to be used for a month or more.

• When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area.

• Do not recharge, short-circuit, heat, burn or disassemble batteries.

Using a Remote Control

Keep in mind the following when using the remote control:

• Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit.

• Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the infrared sensor window of the unit.

• Remote control for different devices can interfere with each other. Avoid using remote control for other device located close to the unit.

• Replace the batteries when you notice a fall off in the operating range of the remote control.

• The maximum operable ranges from the unit are as follows.

- Line of sight: approx. 23 feet (7m)

- Either side of the center:

approx. 16 feet (5m) within 30°

- Above: approx. 16 feet (5m) within 15°

- Below: approx. 10 feet (3m) within 30°

16feet (5m)

30˚

11 12

13 14

15 16

5 6

8 9

23feet (7m)

SOURCE

TIMER SET

123

456

PQRS

REC MODE D.DUBBING

CM SKIP

SEARCH RAPID PLAY

16feet (5m)

30˚

STANDBY-ON

DISPLAY OPEN/CLOSE

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACETIMER CLEAR

SETUPDISC MENU

RETURNTITLE

iji

CFgh

TRACKING

+--

VCR DVD

AUDIOREC

18 19

20 21 22

24 26

29 31

23 25

NB552

10 EN10 EN

Page 13

FUNCTIONAL OVERVIEW

Introduction

1. DISPLAY button (DVD/VCR)

Press to display the display menu on or off.

2. TIMER SET button (DVD/VCR)

Press to set the unit in the timer standby mode. In

the timer standby mode, press to cancel the mode and to turn the unit on.

3. SOURCE button (DVD/VCR)

Press to select the appropriate input.

4. Number/Character buttons (DVD/VCR)

• Press to select a title/chapter/track/file on display.

• Press to enter values for the settings in the main menu.

• Press to enter title names.

• Press to start the index/time search in VCR mode.

5. TIMER button (DVD/VCR)

Press to display the timer programming list.

6. DISC MENU button (DVD)

Press to display the disc menu.

7. OK button (DVD/VCR)

Press to confirm or select menu items.

8. TITLE button (DVD)

Press to display the title list.

9. PREV H button (DVD)

• During playback, press to return to the beginning of the current chapter, track or file.

• When playback is paused, press to play back reverse step by step.

10. REW E button (DVD/VCR)

DVD mode:

• During playback, press to fast reverse.

• When playback is paused, press to play back slow reverse.

VCR mode:

• During playback, press to rewind the cassette tape or to view the picture rapidly in reverse.

11. PAUSE F button (DVD/VCR)

Press to pause playback or recording.

12. TRACKING

• Press to adjust the tracking during playback or in slow motion of the cassette tape.

• While playback is in still mode, you can adjust the picture blurred vertically.

13. VCR button

• Press to select the VCR output mode.

14. REC MODE button (DVD/VCR)

Press to switch the recording mode.

15. REC I button (DVD/VCR)

• Press once to start a recording.

• Press repeatedly to start the one-touch timer recording.

16. CM SKIP button (DVD)

During playback, press to skip 30 seconds.

17. SEARCH button (VCR)

Press to call up the index or time search menu.

18. STANDBY-ON

Press to turn the unit on and off.

19. OPEN/CLOSE A button (DVD/VCR)

DVD mode:

Press to open or close the disc tray.

VCR mode:

Press to remove the cassette tape from the cassette

compartment.

/ buttons (VCR)

yy button (DVD/VCR)

20. CLEAR button (DVD/VCR)

DVD mode:

Press to clear the password once entered or to cancel

the programming for CD or to clear the selecting marker number in the edit menu, etc.

VCR mode:

Press to reset the tape counter.

21. SETUP button (DVD/VCR)

• Press to display the main menu.

• During DVD playback, press and hold for more than 3 seconds to switch the progressive scanning mode to the interlace mode.

22. Cursor K / L / { / B buttons (DVD/VCR)

Press to select items or settings.

23. RETURN button (DVD/VCR)

Press to return to the previously displayed menu screen.

24. PLAY B button (DVD/VCR)

Press to start or resume playback.

25. NEXT G button (DVD)

• During playback, press to skip to the next chapter, track or file.

• When playback is paused, press to play back forward step by step.

26. FFW D button (DVD/VCR)

DVD mode:

• During playback, press to play back fast forward.

• When playback is paused, press to play back slow forward.

VCR mode:

• During playback, press to rapidly advance the cassette tape or view the picture rapidly in forward.

• When playback is paused, press to view the cassette tape in slow motion.

27. STOP C button (DVD/VCR)

• Press to stop playback or recording.

• Press to exit from the title list.

28. DVD button

• Press to select the DVD output mode.

29. AUDIO button (DVD/VCR)

DVD mode:

• During playback, press to display the audio menu.

VCR mode:

• During playback a HiFi video tape, press to change the audio out setting HiFi and mono.

30. D.DUBBING button (DVD/VCR)

Press to start VCR to DVD (DVD to VCR) duplication

which you set in the main menu.

31. RAPID PLAY button (DVD)

During playback, press to playback in a slightly fast-

er/slower mode with keeping the audio quality.

Connections Basic Setup Function Setup VCR Functions

Recording Playback Editing

Others Español

Note

• If you turn off this unit, [OPEN/CLOSE A] on the remote

control is not available. Be sure to use [OPEN/CLOSE A] or [STOP C / EJECT A] on the unit.

11EN 11EN

Page 14

CONNECTION TO AN EXTERNAL TUNER

This section describes how to connect this unit to an external tuner such as cable/satellite box.

• When you change the connections, all devices should be turned off.

• Refer to the manual accompanying external devices for more information.

Disconnect the power cords of the devices from the AC outlet.

VHF / UHF

antenna

Cable TV

company

RF coaxial cable

ANT. IN

Make the connection as illustrated below.

rear of your TV

disconnectDisconnect

e.g.)

AUDIO IN

VIDEO IN

rear of your TV

DVD/VCR

S-VIDEO IN --- AUDI O --- OUT

IN --- VIDEO --- OUT

RCA audio cable

DVD

DIGITAL

AUDIO

S-VIDEO

AUDIO OUT

OUT

DVD/VCR

COMPONENT

S-VIDEO IN --- AUDIO --- OUT

VIDEO OUT

RLR

/CB

IN --- VI DE O --- OUT

PR /CR

rear of this unit

RCA video cable

S-video cable

RCA video cable

RF coaxial cable

ANT. IN

VIDEO

S-VIDEO

OUT

RCA audio cable

AUDIO OUT

RF coaxial cable

OUT IN

external tuner

TV signal

Supplied cables used in this connection are as follows:

• RCA audio cable (L/R) x 1

• RCA video cable x 1 Please purchase the rest of the necessary cables at your local store.

Note

• Required cables and connecting methods differ depending on the external tuner. For more information, please contact your external tuner provider.

With this setup:

• You can record any unscrambled channel by selecting the channel on the external tuner. Be sure that the external tuner is turned on.

• Signal from the external tuner can be output only on CVBS output even when the power of the unit is off.

• You cannot record one channel while watching another channel.

rear of your TV

Plug in the power cords of the devices to the AC outlet.

connect

After making the connection as described above, make

sure to select the appropriate video input type by

following the steps in “SETTINGS FOR THE VIDEO INPUT” on page 13.

Note to CATV system installer

• This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper grounding - in particular, specifying that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as possible.

12 EN12 EN

rear of this unit

Page 15

SETTINGS FOR THE VIDEO INPUT

You must let the unit know which video input jack you are using before making a recording.

Introduction

STANDBY-ON

SOURCE

TIMER SET

DISPLAY OPEN/CLOSE

ABC DEF.@/:

123

JKL MNOGHI

456

PQRS

CM SKIP

TUV WXYZ

SPACETIMER CLEAR

TRACKING

VCR DVD

REC MODE D.DUBBING

SEARCH RAPID PLAY

SETUP

SETUPDISC MENU

RETURNTITLE

iji

+--

AUDIOREC

Press [SETUP] and use [K / L] to

select “General Setting”, then press

[OK].

“General Setting” menu will appear.

Use [K / L] to select “Video”, then

press [OK].

Submenu will appear.

Use [K / L] to select “Video Input”,

then press [OK].

Use [K / L] to select desired external

input position, then press [OK].

General Setting

Playback Display Video Recording Clock Reset All

Progressive Scan TV Aspect Video Input

Video Input

E1 (Rear) E2 (Front)

Use [K / L] to select the input jack

type to connect, then press [OK].

If you want to use VIDEO IN jack, select “Video In”.

If you want to use S-VIDEO IN jack, select “S-Video In”.

General Setting

Playback Display Video Recording Clock Reset All

E1 (Rear)

Video Input

Video In

E1 (Rear)

S-Video In

E2 (Front)

Progressive Scan TV Aspect Video Input

Connections

Basic Setup Function Setup VCR Functions

Recording Playback Editing

NB552

Press [SETUP] to exit.

Others Español

13EN 13EN

Page 16

CONNECTION TO A TV

Make one of the following connections, depending on the capabilities of your existing device.

VCR and basic DVD connection

Available on DVD only

this unit

DVD

DIGITAL

AUDIO

S-VIDEO

AUDIO OUT

OUT

COAXIAL

this unit

AUDIO OUT

RCA audio cable

VIDEO

DVD/VCR

LRL

IN --- VID E O --- OU T

AUDIO IN

S-VIDEO IN --- AUDI O --- OU T

DVD

DVD/VCR

DIGITAL

AUDIO

S-VIDEO

COMPONENT

S-VIDEO IN --- AUDIO --- OUT

VIDEO OUT

AUDIO OUT

OUT

RLR

OUT IN

/CB

COAXIAL

IN --- VIDE O --- OUT

/CR

RCA video cable

AUDIO OUT (DVD/VCR)

VIDEO OUT

Method 1 Method 2

analog audio good picture better picture

AUDIO

OUT

DVD

COMPONENT

S-VIDEO

OUT

AUDIO IN

RCA audio cable

DVD

DIGITAL

AUDIO

S-VIDEO

OUT

COAXIAL

OUT

COMPONENT

VIDEO OUT

/CB

/CR

S-VIDEO IN

and

S-video cable component video cable

DVD

DIGITAL

AUDIO

S-VIDEO

COMPONENT

AUDIO OUT

OUT

COAXIAL

VIDEO OUT

OUT

/CB

PR /CR

DIGITAL

AUDIO OUT

COAXIAL

VIDEO IN

PB/CB

PR/CR

COMPONENT

VIDEO OUT

(Green)

(Blue)

(Red)

(Green)

(Blue)

P /CB

(Red)

PR /CR

AUDIO OUT (DVD)

S-VIDEO OUT COMPONENT

VIDEO OUTPUT

Supplied cables used in this connection are as follows:

• RCA audio cable (L/R) x 1

• RCA video cable x 1 Please purchase the rest of the necessary cables at your local store.

After you have completed the connections

• Switch the input selector on your TV to an appropriate external input channel. Press a button on the TV’s original remote control that selects an external input channel until the DVD recorder’s opening picture appears. Check your TV’s manual for details.

Note

• Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, pictures may be distorted due to the copy protection system.

• You will not be able to hear the sound being output from DVD if you are not connecting DVD AUDIO OUT when you made either S-video or component video out connection.

• When “Progressive Scan” is set to “ON”, no video signal will be output from the VIDEO OUT or S-VIDEO OUT jack.

To set progressive scan mode, refer to page 75

• This unit is compatible with the progressive scan system. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set “Progressive Scan” to “ON”.

14 EN14 EN

Page 17

CONNECTION TO AN AUDIO SYSTEM

Introduction

2 Channel Analog Audio Connection

stereo system

AUDIO IN

analog audio

input jacks

RCA audio cable

DIGITAL

AUDIO OUT

COAXIAL

AUDIO

OUT

DVD

S-VIDEO

COMPONENT

VIDEO OUT

DVD

DVD/VCR

S-VIDEO IN --- AUDIO --- OUT

DIGITAL

AUDIO

S-VIDEO

COMPONENT VIDEO OUT

AUDIO OUT

OUT

/CB

/CR

RLR

OUT IN

/CB

COAXIAL

IN --- VIDEO --- OUT

/CR

DVD/VCR

S-VI DEO IN --- A UD I O --- OU T

IN --- VI DE O --- OUT

this unit

AUDIO OUT

Supplied cables used in this connection are as follows:

• RCA audio cable (L/R) x 1 Please purchase the rest of the necessary cables at your local store.

audio

Digital Audio Connection

Dolby Digital decoder,

MD deck or DAT deck

AUDIO

OUT

DVD

S-VIDEO

OUT

COMPONENT

VIDEO OUT

DIGITAL

AUDIO OUT

COAXIAL

DIGITAL AUDIO OUTPUT

COAXIAL

P /CB

PR /CR

digital audio coaxial input jack

digital audio coaxial cable

DVD

DVD/VCR

S-VIDEO IN --- AUDIO --- OUT

DIGITAL

AUDIO

S-VIDEO

COMPONENT VIDEO OUT

AUDIO OUT

OUT

OUT IN

/CB

COAXIAL

IN --- VIDEO --- OUT

/CR

Connections

Basic Setup Function Setup VCR Functions

RLR

Recording Playback Editing

Setting

Connection

If output is Dolby Digital encoded audio, connect to a Dolby Digital decoder.

Setup >General Setting >Playback >Disc Audio >

Dolby Digital

Stream

Connecting to an MD deck or DAT deck. PCM

If not connected to any external devices. PCM

* To complete these settings, refer to page 71.

Note

• The DVD AUDIO OUT and DIGITAL AUDIO OUT jacks are only useful in DVD mode.

• The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound by an MD or DAT deck.

• By connecting this unit to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi channel surround sound as heard in the movie theaters.

• Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.

Others Español

15EN 15EN

Page 18

THE VCR / DVD RECORDER SWITCHING

Because this product is a combination of a VCR and a DVD recorder, you must select first which component you wish to operate with [SOURCE].

DVD mode

Press [DVD] on the remote control. (Verify that the DVD indicator is lit.)

VCR mode

Press [VCR] on the remote control. (Verify that the VCR indicator is lit.)

TIMER SET

SOURCE

123

456

PQRS

DVD indicator

SOURCE button

VCR indicator

CM SKIP

VCR DVD

REC MODE D.DUBBING

SEARCH RAPID PLAY

Note

• You cannot switch to another mode (DVD or VCR) during in the timer-standby mode.

STANDBY-ON

DISPLAY OPEN/CLOSE

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACETIMER CLEAR

SETUPDISC MENU

RETURNTITLE

iji

CFgh

TRACKING

+--

AUDIOREC

NB552

VCR button

DVD button

16 EN16 EN

Page 19

Introduction

GUIDE TO ON-SCREEN DISPLAYS AND MENUS

This unit uses the following on-screen displays and menus to guide you to the easy operations. The on-screen displays give you the information on the loaded disc, the disc/file in playback, etc. The menus allow you to change the various kinds of settings for playing back, recording, or editing to suite your preference.

On-Screen Display / Menu

The on-screen display changes in the following order as you press [DISPLAY].

OFF

Disc Information/Menu

Title Name Information

(only when DVD+RW/DVD+R/DVD-RW/DVD-R

(only when a CD with MP3 files is in playback)

is in playback)

DVD

Video

E1 (Rear)

5 15122

SP(2Hr) 1:53

* This is an example screen only for explanation.

1. Indicates a disc type and format mode.

2. Indicates the selected external input position.

3. Indicates a recording mode and possible recording

time left.

4. Indicates an operation status.

5. Each icon means:

: Search

: Audio

: Subtitle

: Angle

: Repeat

6. Indicates the current title number/total number of

titles, the current chapter number/total number of chapters, and time lapse of the current title playback/ total duration of the title.

: Marker

: Noise Reduction

: Zoom

: Surround

VCR mode

12:00AM

0:00:00 HIFISP

4 53

1. Indicates current video status.

2. Indicates the current time.

3. Indicates a recording or playing back mode.

4. Indicates a tape counter.

5. Audio status of the current cassette tape.

Note

• This is an example screen only for explanation. Displayed items are depending on the disc you inserted.

Title/File Name Information

Title Name Information

Title Name

My Title

File Name Information

File Name

My File

1. Displays title/file name.

Connections

Basic Setup

Recording Playback Editing

Function Setup VCR Functions

Others Español

17EN 17EN

Page 20

GUIDE TO ON-SCREEN DISPLAYS AND MENUS

Main Menu

Press [SETUP] to display the main menu. Then use [K / L] to select a menu and press [OK] to display the

menu. These menus provide entries to all main functions of the unit.

Setup

General Setting

Timer Programming

Title List

Disc Edit

CD Playback Mode

General Setting Menu

General Setting

1 2

Playback Display

Video

Recording Clock

Reset All

1. General Setting:

To go to general setting menu.

2. Timer Programming:

To program a timer recording.

3. Title List:

To call up the title list.

4. Disc Edit:

To set up the DVD disc setting.

5. CD Playback Mode:

To set up the CD playback setting.

• “CD Playback Mode” is available only when an audio CD, a video CD, a CD-RW/-R with MP3 files is inserted into the unit.

1. Playback:

To set up the unit to play back discs as you prefer.

2. Display:

To set up the OSD screen as you prefer.

3. Video:

To set up the video setting.

4. Recording:

To set up the unit to record to discs as you prefer.

5. Clock:

To set up the clock of the unit as you need.

6. Reset All:

To reset the setting to the factory default.

Disc Edit

Edit Disc Name

Erase Disc Make Edits Compatible

Disc Protect OFF ON

Disc Edit

Edit Disc Name

Erase Disc Finalize

Disc Protect OFF ON

Disc Edit

Edit Disc Name

Finalize Disc Protect OFF ON

CD Playback Mode

Random Play

Program Play PBC (Video CD only)

Disc Edit / CD Playback Mode

1. Edit Disc Name:

Allows you to rename the disc.

2. Erase Disc: (DVD+RW/DVD-RW only)

Allows you to erase all contents in the disc and format it.

3. Make Edits Compatible: (DVD+RW only)

Allows you to memorize the editing status on the disc if

you have added or deleted chapters, or made chapters hidden on this unit, and to effect it when playing back on the other unit.

Finalize: (DVD+R/DVD-RW/-R only) Allows you to finalize a disc containing recorded titles.

4. Disc Protect :

Allows you to protect a disc from accidental editing or

recording.

5. Random Play:

Allows you to activate the random playback feature.

6. Program Play: (audio CD/video CD only)

Allows you to activate the program playback feature.

7. PBC (Video CD only):

Allows you to select images or information on the menu

screen by activating PBC (playback control) function.

18 EN18 EN

Page 21

INITIAL SETTING

You need to follow these steps when you turn on this unit for the first time.

Press [STANDBY-ON yy].

STANDBY-ON

TIMER SET

VCR DVD

DISPLAY OPEN/CLOSE

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACETIMER CLEAR

TRACKING

+--

SETUPDISC MENU

RETURNTITLE

iji

SOURCE

123

456

PQRS

1 2

Turn the TV on. Select the input to which the unit is connected.

Use [K / L] to select your desired

language, then press [OK] to set language.

Initial Setup

Press [OK] to activate “Clock Setting”.

Initial Setup

OSD Language

English

Français

Español

Clock Setting

- - - / - - / - - - - ( - - - )

- - : - - - -

Introduction

Connections

Basic Setup

Recording Playback Editing

REC MODE D.DUBBING

CM SKIP

SEARCH RAPID PLAY

AUDIOREC

Proceed to step 4 in “Clock Setting”

on page 20.

Function Setup VCR Functions

NB552

Others Español

19EN 19EN

Page 22

SETTING THE CLOCK

Set the clock before you try the timer programming.

Clock Setting

STANDBY-ON

SOURCE

TIMER SET

DISPLAY OPEN/CLOSE

ABC DEF.@/:

123

JKL MNOGHI

456

PQRS

CM SKIP

TUV WXYZ

7809

SPACE

SPACETIMER CLEAR

TRACKING

VCR DVD

REC MODE D.DUBBING

SEARCH RAPID PLAY

SETUP

SETUPDISC MENU

RETURNTITLE

iji

+--

AUDIOREC

Press [SETUP] and use [K / L] to

select “General Setting”, then press

[OK].

“General Setting” menu will appear.

Use [K / L] to select “Clock”, then

press [OK].

Use [K / L] to select calendar or time,

then press [OK].

General Setting

Playback Display Video

Clock Setting

Recording

JAN / 01 / 2007 ( MON )

Clock Reset All

12 : 00 AM

Use [{ / B] to select an item to set,

and use [K / L] to select the contents to suit your preference, then press [OK].

General Setting

Playback Display Video

Clock Setting

Recording

JAN / 01 / 2007 ( MON )

Clock Reset All

12 : 00 AM

NB552

Note

• Your clock setting will be lost if either there is a power failure or this unit has been unplugged for more than 30 seconds.

• For setting the day, year, hour, and minute, [the Number buttons] can also be used.

• You can set the built-in calendar from the year 2007 up to 2056.

20 EN20 EN

Your setting will be activated. The clock start counting when you press [OK].

Press [SETUP] to exit.

Page 23

INFORMATION ON DVD RECORDING

Before you make a recording, read the following information.

Recordable Discs

This unit can record to DVD+RW, DVD+R, DVD-RW and DVD-R. DVD+R/DVD-R can only be recorded to once. DVD+RW/ DVD-RW can be recorded to and erased many times.

DVD-RW/-R will be recorded in the DVD+VR mode automatically in this unit.

Logo

Attributes

8cm/12cm, single-sided,

DVD+RW DVD+R

single layer disc Approx. max. recording time (SLP mode): 360 minutes (4.7GB) (for 12cm) 108 minutes (1.4GB) (for 8cm)

DVD-RW

DVD-R

• Following discs are recommended for good recording quality and are proven to be compatible with this unit. However, depending on the media condition the unit may not read the disc properly.

Verbatim DVD+R 8x, DVD+RW 4x, DVD-R 8x, DVD-RW 2x JVC DVD-RW 4x Maxell DVD+R 4x/8x/16x, DVD-R 8x/16x SONY DVD+R 4x/8x/16x, DVD+RW 4x TDK DVD+R 4x/8x/16x

Performance of any other discs are not guaranteed.

• You can play back DVD+RW on most DVD players without finalizing. However, if you have added or deleted chapters, or made chapters hidden, you must perform “Make Edits Compatible” before being able to see those effects on other units. (Refer to page 67 for more details.) To play back discs other than DVD+RW on other DVD players, you will need to finalize.

Unrecordable Discs

• DVD-RW recorded in the mode other than +VR is not recordable on this unit unless you erase all contents in the disc (refer to page 66).

• DVD-R recorded in the mode other than +VR is not recordable on this unit.

Recording Mode

You can select a recording mode among 6 options, and the recording time will depend on the recording mode you select as follows.

Disc size

8cm Disc

12cm Disc

Recording mode

HQ SP (2Hr) SPP LP (3Hr) EP (4Hr) SLP (6Hr) HQ SP (2Hr) SPP LP (3Hr) EP (4Hr) SLP (6Hr)

(1Hr)

(2.5Hr)

(1Hr)

(2.5Hr)

Recording time

18 min

36 min

45 min

54 min

72 min

108 min

60 min

120 min

150 min

180 min

240 min

360 min

Video/sound quality

• The recording time is only an estimate. The actual recording time may differ.

• The audio and video quality gets poorer as the recording time becomes longer.

• Each time [REC MODE] is pressed, recording mode and its allowed recording time will be displayed.

Note

• This unit cannot record to CD-RW or CD-R.

• DVD+RW/+R, DVD-RW/-R and CD-RW/-R recorded on a personal computer or a DVD or CD recorder may not be played back if the disc is damaged or dirty or if there is condensation on the player’s lens.

• If you record a disc using a personal computer, even if it is recorded in a compatible format it may not be played back because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.)

• Since the recording is made by the VBR (variable bit rate) method, depending on the picture you are recording, the actual remaining time for recording may be a little shorter than the remaining time displayed on the TV screen.

• You cannot record copy-protected program using this unit. (Copy-protected signal is included in DVDvideo or some satellite broadcasts.)

• You cannot record “copy-once only” program on DVD.

Introduction

Connections Basic Setup Function Setup VCR Functions

(good)

(poor)

(good)

Recording

(poor)

Playback Editing

Others Español

21EN 21EN

Page 24

BEFORE RECORDING

Make Recording Compatible Setting for Auto Chapter

Use this feature to make the unfinalized +VR mode discs recorded on other unit recordable on this unit. When you make an additional recording on this unit with “Make Recording Compatible” set to “ON”, the title menu is automatically converted to our style.

1) Press [SETUP] and use [K / L] to select “General Setting”, then press [OK].

“General Setting” menu will appear.

2) Use [K / L] to select “Recording”, then press [OK].

“Recording” menu will appear.

3) Use [K / L] to select “Make Recording Compatible”, then press [OK].

4) Use [K / L] to select “ON” or “OFF”, then press [OK].

General Setting

Playback Display Video Recording Clock Reset All

ON: Title list will be replaced when you make

additional recordings to the discs recorded by other units.

OFF: Prohibiting additional record to the disc that

has a title list created by other units.

Auto Chapter Auto Finalize

Make Recording Compatible

Dubbing Mode

Make Recording Compatible

OFF

You can set a specified time for chapter marks.

1) Press [SETUP] and use [K / L] to select “General Setting”, then press [OK].

“General Setting” menu will appear.

2) Use [K / L] to select “Recording”, then press [OK].

“Recording” menu will appear.

3) Use [K / L] to select “Auto Chapter”, then press [OK].

4) Use [K / L] to select a desired time option, then press [OK].

General Setting

Playback Display Video Recording Clock Reset All

Auto Chapter Auto Finalize

Auto Chapter

Dubbing Mode

OFF

Make Recording Compatible

5 minutes 10 minutes 15 minutes 30 minutes 60 minutes

5) Press [SETUP] to exit.

Note

• The interval for auto chapter marks may slightly differ.

• A blank chapter may be created depending on the remaining time of the disc.

5) Press [SETUP] to exit.

22 EN22 EN

Page 25

Introduction

BASIC RECORDING & ONE-TOUCH TIMER RECORDING

Follow the steps to record TV programs from an external tuner. This unit has no tuner system so cannot receive TV broadcasts without external tuner or such devices.

STANDBY-ON

SOURCE

TIMER SET

SOURCE

TIMER SET

DISPLAY OPEN/CLOSE

OPEN/CLOSE

ABC DEF.@/:

123

JKL MNOGHI

456

PQRS

CM SKIP

TUV WXYZ

SPACETIMER CLEAR

TRACKING

VCR DVD

REC MODE

REC

REC MODE D.DUBBING

SEARCH RAPID PLAY

SETUPDISC MENU

RETURNTITLE

iji

+--

DVD

AUDIOREC

Press [STANDBY-ON yy].

Turn on the TV and be sure to select the input to

which the unit is connected.

Press [DVD].

Press [OPEN/CLOSE A] to open the

disc tray and insert your disc with its

label facing up.

Align the disc to the disc tray guide.

* Make sure the disc is compatible with this unit.

(Refer to page 21 for the list of compatible discs.)

Press [OPEN/CLOSE A] to close the

disc tray.

It may take a while to load

the disc completely.

• When inserting a brand-new DVD+RW/DVDRW, the unit automatically starts to format.

• If titles have been recorded on the disc, the title list is displayed. Press [STOP C] to exit the title list.

Press [REC MODE] to select a

recording mode.

Refer to “Recording Mode” on page 21 for DVD.

Connections Basic Setup Function Setup VCR Functions

Recording

Playback Editing

NB552

SP(2Hr) 0:58

Press [SOURCE] to select the

appropriate external input position

(E1/E2) to which your external tuner is connected. Then select the desired channel to record on the external tuner.

Instructions continue on the next page.

Others Español

23EN 23EN

Page 26

BASIC RECORDING & ONE-TOUCH TIMER RECORDING

Press [REC I] to start recording.

“I” will be displayed for 5 seconds.

Press [PAUSE F] to pause recording. Press [PAUSE F]] or [REC I] again to restart recording.

To set one-touch timer recording (OTR)...

This is a simple way to set the recording time in blocks of 30 minutes.

Press [REC I] repeatedly until the desired recording time (30 minutes to 6 hours) appears on the TV screen.

One-touch timer recording will start.

0:30

(normal recording)

1:00

Press [STOP C] to stop recording.

The recorded title will appear in the title list.

(Refer to “Guide to a Title List” on page 55.) e.g.) DVD+R

Writing to Disc 90%

1 SP(2Hr)

NOV/21/07 11:00AM NOV/21/07 0:20:44

EMPTY TITLE 1:41:17

• Press [STOP C] to exit the title list.

E1 SP

SP(2Hr)

6:00 5:30

• To cancel one-touch timer recording within the

specified time, press [STOP C].

Note

• When you press [REC I], recording starts immediately and continues until the disc is full or you stop recording.

• This unit cannot record images as aspect ratio of 16:9. The 16:9 images will be recorded as 4:3.

• When the unit clock has not been set, the space for a date and time of title names will be blank.

• You cannot change the recording mode during the recording pause mode.

• You can change a channel to be recorded during the recording pause mode.

Note for one-touch timer recording

• Press [DISPLAY] to see the remaining recording time on the TV screen.

• Unlike the timer recording, you can perform the following operations during one-touch timer recording.

- Turning off the power to stop one-touch timer recording.

- Using [REC I] or [STOP C] on the remote control.

• You cannot use the pause function during one-touch timer recording.

• If DVD one-touch timer recording is completed during VCR playback or recording, the DVD will be in stop mode and the VCR keeps the current mode.

• When one-touch timer recording is finished and the power is turned off, the unit will switch to the timer-standby mode automatically if a timer recording has been programmed. Press [TIMER SET] to cancel the timer-standby mode to use the unit continuously.

24 EN24 EN

Page 27

TIMER RECORDING

You can program the unit to record up to 12 programs within a month in advance. Daily or weekly program recordings are also available.

Before recording, make sure

• Connect the external tuner to either E1 or E2 and set it to output audio/video signals when it comes to the time you want to start recording.

• Do not change the external tuner’s channel while you are recording. You cannot watch one channel and record another at the same time.

• Set the clock before setting a timer programming.

• Insert a recordable disc with enough recordable space or a cassette tape with a erase-protection tab.

STANDBY-ON

Guide to Timer Programming Display

Timer Programming

JAN/ 2/07 12:00 AM E1 SP

Date Start End E1/E2 JAN/02 12:00AM 1:00AM E1 New Program

MON JAN/01 11:00AMSP (1:00)

1/1

1 Title of a timer program (Contains date, time, selected

external input position, recording mode of the program) 2 Current date and time 3 Recording mode, and length of the recording 4 Timer program list 5 Total number of pages and current page (2 pages

maximum)

Introduction

Connections Basic Setup Function Setup VCR Functions

TIMER SET

SOURCE

TIMER SET

123

456

PQRS

7809

TIMER

OPEN/CLOSE

DISPLAY OPEN/CLOSE

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE

SPACETIMER CLEAR

SETUP

SETUPDISC MENU

REC MODE D.DUBBING

CM SKIP

SEARCH RAPID PLAY

TRACKING

VCR DVD

RETURNTITLE

iji

+--

AUDIOREC

Press [TIMER].

Use [K / L] to select “New Program”,

then press [OK].

Timer Programming

Date Start End E1/E2 New Program

MON JAN/01 11:00AM

1/1

Use [K / L] to enter the date, then

press [B].

Timer Programming

Date Start End E1/E2

Date

New Program

JAN/02

E1/E2E1REC To Mode

MON JAN/01 11:00AM

Start

- - : - -

DVD SP

SP 2 : 00

End

- - : - -

1/1

Recording

Playback Editing

NB552

JAN/01

Daily

MON-SAT

MON-FRI

SAT

FRI

SUN

JAN/31

When pressing [L] at the current date, the date will change as follows.

e.g.) January 1st

Instructions continue on the next page.

Others Español

25EN 25EN

Page 28

TIMER RECORDING

Use [K / L] or [the Number buttons]

to enter the start and end time, then

press [B].

Timer Programming

Date Start End E1/E2

Date

New Program

JAN/02

E1/E2

MON JAN/01 11:00AM

Start

12 : 00AM

REC To Mode

DVD SP

SP 2 : 00

- - : - -

End

1/1

Use [K / L] to select the appropriate

external input position (E1/E2) to

which your external tuner is connected, then press [B].

Timer Programming

Date Start End E1/E2

Date

New Program

JAN/02

E1/E2E1REC To Mode

MON JAN/01 11:00AM

Start

12 : 00AM

DVD SP

End

1 : 00AM

SP 1 : 00

1/1

Use [K / L] to select a recording

media (“DVD” or “VCR”), then press

[B].

Date Start End E1/E2

Date

New Program

JAN/02

E1/E2

Start

12 : 00AM

REC To Mode

1 : 00AM

DVD SP

SP 1 : 00

End

1/1

Use [K / L] to select a recording

mode.

Date Start End E1/E2

Date

New Program

JAN/02

E1/E2

Start

12 : 00AM

REC To Mode

1 : 00AM

DVD SP

SP 1 : 00

End

1/1

Refer to “Recording Mode” on page 21 for DVD or “Recording” on page 77 for VCR.

• You can check the remaining recordable space of the disc when you select the recording mode.

Date

JAN/02

E1/E2

Start

12 : 00AM

REC To Mode

1 : 00AM

DVD SP

SP 1 : 00

End

Auto recording mode select...

When “Auto” is selected as a recording mode, the unit calculates how much time is available on the disc and determines the appropriate recording mode to complete recording the program.

Date

JAN/02

E1/E2E1REC To Mode

Start

12 : 00AM

DVD Auto

End

1 : 00AM

Auto 0 : 00

• “Auto” is only available for one program in the timer program list.

• The recording may be cut short when the available recording space of the disc is too limited.

Press [OK] when all items are entered.

Your program setting is now stored.

• To set another program, repeat steps 2 to 7.

• To exit, press [TIMER] or [SETUP].

• When 2 or more programs are overlapped, “Timer program overlapped” appears, and the overlapped program will be displayed in blue.

• To correct the timer program refer to “Checking, canceling, or correcting the timer programming information” on page 27.

Press [TIMER SET] to set a timer

programming.

TIMER REC indicator will light up on the front panel.

Note

• If you have not set the clock yet:

“Clock Setting” menu will appear instead of the timer

programming list at step 1. Continue with the step 4 in “Clock Setting” on page 20 before setting a timer programming.

• Use [s / B] to move the cursor to the left and the

right in “Timer Programming” menu.

• If a basic recording or one-touch timer recording is in progress on one component (e.g., VCR) and the timer recording set for the other component (e.g., DVD) is about to begin, the unit automatically switches to the programmed channel for timer recording 2 minutes before the programmed starting time, and the recording in progress (for VCR) will be canceled UNLESS their recording channels are the same. If their recording channels are the same, the timer recording will start without canceling the recording currently in progress. In this case, the recording of the same channel will be made on both DVD and VCR.

• Cancel the timer-standby mode by pressing [TIMER SET] before operation for either DVD or VCR. When finished operating, press [TIMER SET] to resume the timer-standby mode.

• In the timer-standby mode, you can turn on the power and use the component (VCR or DVD) which is not currently timer-programmed.

26 EN26 EN

Page 29

TIMER RECORDING

Introduction

Checking, canceling, or correcting the timer programming information

1) Press [TIMER SET].

TIMER REC indicator will light off on the front panel.

2) Press [TIMER].

3) Check the information on the list you will need.

Timer Programming

JAN/ 2/07 12:00 AM E1 SP

Date Start End E1/E2 JAN/02 12:00AM 1:00AM E1 New Program

MON JAN/01 11:00AMSP (1:00)

1/1

4-A) To delete the timer program:

1 Use [K / L] to select the program you want to

delete, then press [OK]. 2 Use [K / L] to select “Delete”, then press [OK]. Confirmation window will appear. 3 Use [K / L] to select “Yes”, then press [OK].

4-B) To correct the timer program:

1 Use [K / L] to select the program you want to

correct, then press [OK]. 2 Use [K / L] to select “Program Change”, then

press [OK]. 3 Correct the timer program by using

[K / L / { / B], then press [OK].

5) Press [TIMER] to exit.

6) Press [TIMER SET] to return to the timer standby mode.

To stop the timer recording in progress

Press [STOP C] to stop the disc recording or [STOP C/EJECT A] to stop the cassette tape recording on the front panel of the unit.

[STOP C] on the remote control is not effective.

If the timer program did not complete correctly, the error number appears in the timer programming list.

Timer Programming

Date Start End E1/E2

E41 JAN/02 12:00AM 1:00AM E1

New Program

Each error number means:

E1-22 E37-39

E24 Unrecordable disc E42 No disc when

E25-26 Copy prohibited

E29 Disc protected E44 Already 254 chapters

E30 Disc full E45 Copy prohibited

E35 PCA full *1 E46 It is impossible to

E36 Already finalized

E40 Some portion has

Recording error other than below

program

video format disc

not been recorded because of program overlapping. Recording did not start at the start time.

• E23, E27, E28, E31, E32, E33 and E34 are not displayed.

• A program with the error number is grayed in the timer programming list.

• Once the timer programming list with error line(s) is displayed, or after canceling and setting again the timer standby mode, the program line(s) with error will be cleared.

*1 PCA is a disc's space reserved for recording test.

TUE JAN/02 11:00AM

1/1

E41 Power failed

recording

E43 Already 49 titles

recorded

program

record additionally on a disc recorded by other units when setting “ Make Recording Compatible” to “OFF”.

Connections Basic Setup Function Setup VCR Functions

Recording

Playback Editing

Note

• Press [TIMER] to check the timer recording in progress. When the timer recording is proceeding, that

program will be highlighted with red. In this case, you cannot select any other program.

Others Español

27EN 27EN

Page 30

Hints for Timer Recording

TIMER RECORDING

• If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer programming will be lost.

• If a disc is not inserted, TIMER REC indicator on the front panel flashes and timer recording cannot be performed. In some cases, TIMER REC indicator will light up momentarily around the start point as the unit attempts to record. Please insert a recordable disc.

• If a cassette tape with a erase-protection tab is not in the cassette compartment or there is no cassette tape in the cassette compartment, VCR REC indicator on the front panel flashes and timer recording cannot be performed. Please insert a recordable cassette tape.

• If you press [TIMER SET] and turn on the unit while either DVD or VCR is in timer standby mode (TIMER REC indicator will light off). In this case, you cannot change the mode between DVD and VCR. You cannot change any settings using [SETUP] or edit discs.

• When all the timer recording is completed, TIMER REC indicator flashes. To play back or eject the recorded disc, press [TIMER SET] first, then select the recorded title and press [PLAY B], or [OPEN/CLOSE A] to remove the disc.

• If both DVD and VCR are timer programmed, you cannot use any functions for either unit during timer standby or timer recording. If you want to use functions other than recording under such condition, cancel timer recording by pressing [TIMER SET] during timer standby or stop recording by pressing [STOP C] on the front panel during timer recording.

• To cancel the timer standby mode, press [TIMER SET].

• When the starting and the ending time are the same, the length of the recording will be set for 24 hours. When the disc or cassette tape becomes full during the recording, the unit turns itself off.

• When the programmed starting and ending time are earlier than the current time, the setting will not be accepted and be cleared for redoing.

• If the starting time is earlier and the ending time is later than the current time, the recording will start right after you turn the power off.

• The timer recording for digital TV cannot record any audio language other than English.

• The timer recording cannot be performed in DVD and VCR at the same time. If you set 2 programming with the same channel and time in both devices, the program with a lower program number will be recorded.

The Priority of Overlapped Settings

• Timer program which has the earlier start time will be placed first in the timer program list, and be given priority over the programs with the later start time when timer programs overlap.

• When timer programs overlap, the first 2 minutes (at the longest) of the later recording will be cut off.

• When two or more timer programs have the same start time, the program set first will be given priority.

• A timer recording of lower priority will be canceled or start from the middle.

• Check the overlapped timer programmings and change the priority if necessary.

When the starting time is the same:

A program set previously (PROG. A) has priority.

PROG. A

PROG. B

actual recording

The rst 2 minutes (at the longest) will be cut o.

PROG. A

PROG. B

Note for DVD recording

• When the recording time of 2 programs are overlapped, or the end time of a program and the start time of another program is the same, the first 2 minutes (at the longest) of the subsequent program will be cut off.

• If the cut-off portion comes up to 3 minute or more, this program will be displayed with error number E40 in the timer programming list.

28 EN28 EN

When the end time of the programming currently being recorded and the start time of the subsequent program are same:

The beginning of the PROG. B may be cut o.

PROG. A

PROG. B

actual recording

The rst 2 minutes (at the longest) will be cut o.

PROG. BPROG. A

Page 31

SATELLITE LINK

You can set the unit to start recording whenever it detects the video signal from the external tuner.

Preparing for the satellite link timer recording: Preparation on the tuner

• Satellite link accepts only the connection from E1 (rear) with the external tuner. (The connection from E2 cannot read any signals from the external tuner.)

• The external tuner should be equipped with some kind of timer function. Using timer function of the tuner, set it to output audio/video signals when it comes to the time you want to start recording, and stop output audio/ video signals when it comes to the time you want to finish recording. Refer to the tuner’s manual on how to set the timer.

• Make sure to set the satellite link standby mode when you finish setting.

Press [SETUP].

Use [K / L] to select “Timer

Programming”, then press [OK].

Use [K / L] to select “Satellite Link”,

then press [OK].

Timer Programming

Timer Programming Satellite Link

Introduction

Connections Basic Setup Function Setup VCR Functions

STANDBY-ON

TIMER SET

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACETIMER CLEAR

TRACKING

VCR DVD

REC MODE D.DUBBING

SEARCH RAPID PLAY

DISPLAY OPEN/CLOSE

SETUP

SETUPDISC MENU

RETURNTITLE

iji

+--

AUDIOREC

SOURCE

123

456

PQRS

TIMER

CM SKIP

Use [K / L] to select the time, media

and recording mode, then press [OK].

Satellite Link

Start Mode

5:00PM DVD SP (2Hr)

To Standby Mode

DVD VCR

Use [K / L] to set the desired starting

time, then press [

• The hour can be selected from 1 to 12 with AM or PM.

• Repeat procedures in step 5 to set the desired minutes.

• If you wish to go back to the left, press [{].

B].

Use [K / L] to select a recording

media (“DVD” or “VCR”), then press

[

B].

Recording

Playback Editing

NB552

Use [K / L] to select the recording

mode.

Refer to page 21 for details.

Instructions continue on the next page.

Others Español

29EN 29EN

Page 32

Press [OK].

“To Standby Mode” is highlighted.

Press [OK] again.

Satellite Link

In a second, the unit will be turned off automatically as it goes into the satellite link standby mode.

To cancel the satellite link function while in the satellite link standby mode:

Press [TIMER SET] to turn on the unit. To cancel the satellite link function while the

satellite link recording is in progress: Press [STOP C] on the front panel of the unit.

DVD

Start Mode

VCR

5:00PM DVD SP (2Hr)

To Standby Mode

SATELLITE LINK

Note

• If the signal of external input breaks up over 5 seconds, satellite link function will be canceled.

• If you have not set the clock, “Clock Setting” menu will appear at step 3. Follow to step 3 in “Clock Setting” on page 20.

• You cannot set the end time for the satellite link timer recording on this unit.

• Recording picture will be distorted if the copy protection signal is being detected during satellite link timer recording.

• You can record the satellite link by using S-video input jacks on the rear panel. Refer to page 13 for more information.

• When a regular timer recording and the satellite link timer recording are overlapped, those recordings are recorded as illustrated below.

• Press [TIMER] during the satellite link timer recording to check the satellite link timer recording in progress.

example 1

timer recording

satellite link

actual recording

The rst 2 minutes (at the longest) will be cut o.

timer recording

satellite link

actual recording

example 2

timer recording

satellite link

actual recording

example 3

The rst 2 minutes (at the longest) will be cut o.

30 EN30 EN

Page 33

OVERWRITING UNNECESSARY TITLE

Introduction

Overwriting from the Beginning of the Title

You can overwrite the existing title from the beginning.

1) Press [STANDBY-ON

Make sure that the TV input is set on the unit.

2) Load the disc that includes a title to be overwritten.

Title list will appear. If the title list does not appear, press [TITLE].

3) Press [REC MODE] to select a recording mode.

Refer to “Recording Mode” on page 21.

4) Use [K / L] to select a title to be overwritten, then press [OK].

5) Use [K / L] to select “Overwrite”, then press [OK].

6) Press [SOURCE] to select the appropriate external input position (E1/E2) to which your external tuner is connected. Then select the desired channel to record on the external tuner.

e.g.) DVD+RW

yy].

It takes a while to display

the title list.

1 SP (2Hr)

NOV/21/07 11:00AM NOV/21/07 0:20:44

NOV/22/07 11:35 NOV/22/07 0:10:33

1 SP (2Hr)

Play Edit

NOV/21/07 11:00AM

Overwrite

NOV/21/07 0:20:44

selected title number to be overwritten

E1 SP

AM E1 EP

E1 SP

0:01:00

+RW

E1 (Rear)

Overwriting in the Middle of the Title

You can overwrite the existing title from the selected position.

1) Follow the steps 1, 2 and 4 on the left.

2) Use [K / L] to select “Play”, then press [OK].

Playback will start.

3) Press [PAUSE F] at the point from which you want to start overwriting.

4) Press [REC I]. “F I”, display menu, channel, and the time lapse will

be displayed as illustrated on the left.

5) Press [SOURCE] to select the appropriate external input position (E1/E2) to which your external tuner is connected. Then select the desired channel to record on the external tuner.

6) Press [REC I] again.

Overwriting recording starts.

7) Press [STOP C] to stop recording.

This operation may take a

while to be completed.

Note

• Recording mode of the overwriting title is the same as that of the original (overwritten) title when overwriting in the middle of the title.

• Title name will not be overwritten.

Connections Basic Setup Function Setup VCR Functions

Recording

Playback Editing

F I

SP(2Hr) 2:00

7) Press [REC I].

Overwriting recording starts. The elapsed-time counter starts running.

8) Press [STOP C] to stop recording.

Title name is also overwritten.

This operation may take a

while to be completed.

Note

• The remaining recording time is displayed on the bottom right corner of the TV screen during overwriting.

Others Español

31EN 31EN

Page 34

OVERWRITING UNNECESSARY TITLE

Hints for Overwriting

When you overwrite on the unnecessary title, there were various circumstances such as follows. Please note that following cases only describe the overwriting without any recording mode discrepancy. To avoid accidental deletion please check if there is no important title after the overwriting point.

When overwriting title is shorter than the existing title:

(overwriting from the beginning of the title)

overwrite recording : A

existing title : B

When overwriting title is longer than the existing title:

(overwriting from the beginning of the title)

overwrite recording : A

existing title : B

overwrite recording : A

existing title : B

existing title : C

after overwriting

30 - 180 seconds will be cut o.

title name : A

30 - 180 seconds will be cut o.

title name : A

title name : B

title name : C

When overwriting in the middle of the title:

overwrite recording : A

existing title : B

after overwriting

30 - 180 seconds will be cut o.

title name : B*

Overwritten section and the rest of the sections will

have the same title name as the original existing title (B).

Note

• When a title name is overwritten, its thumbnail is also overwritten.

• “Auto Chapter” interval time is reset at the overwriting start point.

• A chapter mark is put the beginning of the overwrite title when overwriting in the middle of the title.

32 EN32 EN

title name : B

Page 35

EXTERNAL DEVICE RECORDING

Connection to an External Device

Connect the external device properly to either E2 (front) or E1 (rear) input jacks of this unit by using S-video or RCA audio / video cables.

AUDIO OUT

VIDEO

S-VIDEO

OUT

S-VIDEO

external device

OUT

(camcorder, VCR etc.)

VIDEO

OUT

AUDIO OUT

Introduction

Connections Basic Setup Function Setup VCR Functions

S-video cable

to E2 IN

RCA video cable

RCA audio cable

front of this unit

to E1 IN

S-video

cable

S-VIDEO IN --- AUDIO --- OUT

DVD/VCR

LRL

IN --- VIDEO --- OUT

RCA video cable

DIGITAL

AUDIO OUT

COAXIAL

AUDIO

OUT

RCA audio cable

DVD

DVD/VCR

S-VIDEO IN --- AUDIO --- OUT

S-VIDEO

COMPONENT VIDEO OUT

LRL

IN --- VIDEO --- OUT

rear of this unit

After making the connection as described above, make sure to select the appropriate video input type by following the steps in “SETTINGS FOR THE VIDEO INPUT” on page 13.

Supplied cables used in this connection are as follows:

• RCA audio cable (L/R) x 1

• RCA video cable x 1 Please purchase the rest of the necessary cables at your local store.

Note

• When connecting an external device of monaural output to this unit, use AUDIO L jack of E2 (Front).

Recording

Playback Editing

Others Español

33EN 33EN

Page 36

EXTERNAL DEVICE RECORDING

Recording from an External Device

Before recording from an external device, refer to the instructions for the connection on page 33.

STANDBY-ON

SOURCE

TIMER SET

DISPLAY OPEN/CLOSE

OPEN/CLOSE

ABC DEF.@/:

123

JKL MNOGHI

456

PQRS

CM SKIP

TUV WXYZ

SPACETIMER CLEAR

TRACKING

VCR DVD

VCR DV D

REC MODE

REC MODE D.DUBBING

SEARCH RAPID PLAY

SETUPDISC MENU

RETURNTITLE

iji

+--

AUDIOREC

Turn on the TV and press

[STANDBY-ON

1 2

select the input of the TV to which the unit is connected.

When you want to record to the disc:

Press [DVD].

Press [OPEN/CLOSE A] to open the disc tray. Place the disc to record properly.

Press [OPEN/CLOSE A] again to close the disc tray.

It takes a while to load

the disc.

When you want to record to a cassette tape:

Press [VCR].

Insert the cassette tape with a eraseprotection tab into the cassette compartment.

Select the input of the unit which the external device is connected. (E2 or E1)

• To use the input jacks on the rear of this unit;

Select “E1 (Rear)” position by using [SOURCE].

• To use the input jacks on the front of this unit;

Select “E2 (Front)” position by using [SOURCE].

yy], and be sure to

755

Press [REC MODE] to select a

recording mode.

Refer to “Recording Mode” on page 21 for DVD or “Recording” on page 77 for VCR.

Press [RECORD] (DVD or VCR) on the

unit to start recording.

Start playback on the external device

to record from.

For disc:

Press [STOP C] on the unit to stop

recording. For cassette tape: Press [STOP C/EJECT A] on the unit

to stop recording.

This operation may take a

while to be completed.

34 EN34 EN

Page 37

SETTING A DISC TO PROTECT

To prevent accidental recording, editing or erasing the titles, you can protect them from “Disc Edit” menu.

Introduction

Press [SETUP].

STANDBY-ON

TIMER SET

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACETIMER CLEAR

TRACKING

VCR DVD

REC MODE D.DUBBING

SEARCH RAPID PLAY

DISPLAY OPEN/CLOSE

SETUP

SETUPDISC MENU

RETURNTITLE

iji

+--

AUDIOREC

SOURCE

123

456

PQRS

CM SKIP

Use [K / L] to select “Disc Edit”, then

press [OK].

Use [K / L] to select “Disc Protect

OFF

ON”, then press [OK].

e.g.) DVD+RW

Disc Edit

Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON

Use [K / L] to select “Yes”, then press

[OK].

Disc Edit

Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON

Protect this disc?

Yes No

Connections Basic Setup Function Setup VCR Functions

Recording

Playback Editing

NB552

Note

To cancel the disc protect:

• When you insert a disc protected with this unit,

“Disc Protect ON

ON” at step 3.

To release the protect for the disc, select “Yes” at step 4.

OFF” will appear instead of “OFF

Disc Edit

Edit Disc Name Erase Disc Make Edits Compatible

Disc Protect ON OFF

A disc will be protected.

This operation may take a

while to be completed.

Others Español

35EN 35EN

Page 38

PLAYING THE DISCS IN OTHER DVD PLAYERS

Finalizing a Disc

You will need to finalize discs to play back in other DVD players.

Finalizing may take several minutes up to an hour. A shorter recording period on the disc will require a

longer time period for finalization. Do not unplug the power cord during finalization.

STANDBY-ON

SOURCE

TIMER SET

DISPLAY OPEN/CLOSE

ABC DEF.@/:

123

JKL MNOGHI

456

PQRS

TUV WXYZ

SPACETIMER CLEAR

SETUP

SETUPDISC MENU

RETURNTITLE

RETURN

Press [SETUP].

Use [K / L] to select “Disc Edit”, then

press [OK].

“Disc Edit” menu will appear.

Use [K / L] to select “Finalize”, then

press [OK].

Use [K / L] to select “Yes”, then press

[OK].

e.g.) DVD+R, DVD-R

Disc Edit

Edit Disc Name Finalize Disc Protect OFF ON

Finalizing will start.

Finalizing 90%

Finalize disc?

Yes

iji

REC MODE D.DUBBING

CM SKIP

SEARCH RAPID PLAY

TRACKING

VCR DVD

+--

AUDIOREC

Note

• Once you have finalized a DVD+R/ DVD-R, you cannot edit or record anything on that disc.

• There is no need to finalize DVD+RW.

• When you insert a DVD-RW finalized with this unit, “Undo Finalize” will appear instead of “Finalize”.

Disc Edit

Edit Disc Name

Erase Disc Undo Finalize

Disc Protect ON OFF

To release the finalizing for the disc, select “Undo

Finalize” at step 3.

* DO NOT power off during finalization, this will result

in malfunction.

To cancel finalizing...

(DVD-RW only)

• To cancel finalizing at step 4, press [STOP C], select “Yes” with [K / L], then press [OK]. Finalizing is canceled and the unit will be in stop mode.

Do you want to cancel ?

Yes No

Finalizing 5%

• If appears when pressing [STOP C], you cannot cancel finalizing because the finalizing has been in certain progress.

• When selecting “No” and press [OK] or [RETURN], finalizing will be continued.

• You cannot cancel finalizing the DVD+R/DVD-R once it has started.

This operation may take a

while to be completed.

Finalizing is completed.

36 EN36 EN

Page 39

PLAYING THE DISCS IN OTHER DVD PLAYERS

Auto Finalizing

Introduction

You can finalize discs automatically using this function. You can use this function to finalize discs after finishing all timer recordings and at the end of the disc space.

STANDBY-ON

SOURCE

TIMER SET

DISPLAY OPEN/CLOSE

ABC DEF.@/:

123

JKL MNOGHI

456

PQRS

CM SKIP

TUV WXYZ

SPACETIMER CLEAR

TRACKING

VCR DVD

REC MODE D.DUBBING

SEARCH RAPID PLAY

SETUP

SETUPDISC MENU

RETURNTITLE

iji

+--

AUDIOREC

Press [SETUP] and use [K / L] to

select “General Setting”, then press

[OK].

“General Setting” menu will appear.

Use [K / L] to select “Recording”,

then press [OK].

“Recording” menu will appear.

Use [K / L] to select “Auto Finalize”,

then press [OK].

Use [K / L] to select “Disc Full” or

“End of Timer Rec”, then press [OK].

General Setting

Playback Display Video Recording Clock Reset All

Auto Chapter Auto Finalize

Auto Finalize

Dubbing Mode

Disc Full

Make Recording Compatible

End of Timer Rec

Use [K / L] to select “ON”, then press

[OK].

e.g.) “Disc Full”

General Setting

Playback Display Video Recording Clock Reset All

Auto Chapter Auto Finalize

Auto Finalize

Dubbing Mode

Disc Full

Make Recording Compatible

End of Timer Rec

OFF

Connections Basic Setup Function Setup VCR Functions

Recording

Playback Editing

NB552

Your setting will be activated.

Press [SETUP] to exit.

Others Español

37EN 37EN

Page 40

DUBBING MODE

You can copy a DVD to a cassette tape or copy a cassette tape to a DVD. This function will be possible only if the DVD or the cassette tape is not copy protected.

Before starting this function, prepare for the recording on the DVD+RW/+R, DVD-RW/-R or the cassette tape. Refer to pages 22 and 77.

Make sure:

• Insert a recordable disc and a cassette tape with a eraseprotection tab.

Note for recording to a cassette tape:

• The cassette tape's erase-protection tab is intact.

• The remaining time of the cassette tape is long enough.

Note for recording to a disc:

• Make sure that the disc is recordable. Refer to page 21.

STANDBY-ON

SOURCE

TIMER SET

DISPLAY OPEN/CLOSE

ABC DEF.@/:

123

JKL MNOGHI

456

PQRS

TUV WXYZ

SPACETIMER CLEAR

SETUP

SETUPDISC MENU

Press [SETUP] and use [K / L] to

select “General Setting”, then press

[OK].

“General Setting” menu will appear.

Use [K / L] to select “Recording”,

then press [OK].

“Recording” menu will appear.

Use [K / L] to select “Dubbing

Mode”, then press [OK].

Selection menu will appear.

REC MODE

REC MODE D.DUBBING

CM SKIP

SEARCH RAPID PLAY

TRACKING

VCR DVD

VCR

RETURNTITLE

iji

+--

DVD

D.DUBBING

AUDIOREC

Note for VCR to DVD duplication

• After starting VCR to DVD duplication, the picture may be distorted because of the auto tracking function.

This is not a malfunction. Be advised to playback the

cassette tape until the picture is stabilized, then set the starting point which you wish to start recording, and start VCR to DVD duplication.

38 EN38 EN

Page 41

DUBBING MODE

VCR to DVD DVD to VCR

Introduction

Use [K / L] to select “VCR DVD”,

then press [OK].

General Setting

Playback Display Video Recording Clock Reset All

Press [SETUP] to exit.

Press [VCR].

Auto Chapter Auto Finalize Dubbing Mode

Dubbing Mode

Make Recording Compatible

VCR DVD DVD VCR

Press [PLAY B]. Then press

[PAUSE F] at the point you wish to

6 7

start recording.

• Since it takes about a few seconds before the actual dubbing begins, please allow extra 5

seconds when selecting the starting point.

Press [DVD].

Make sure to select a recording mode using

[REC MODE].

Press [D.DUBBING].

VCR to DVD duplication will start.

Press [STOP C] to stop the recording.

Title list will automatically appear.

• If you want to watch the duplicated material after the VCR to DVD duplication, press [OK] and then select “Play” in the title.

Use [K / L] to select “DVD VCR”,

then press [OK].

General Setting

Playback Display Video Recording Clock Reset All

Press [SETUP] to exit.

Press [DVD].

Auto Chapter Auto Finalize Dubbing Mode

Dubbing Mode

Make Recording Compatible

VCR DVD DVD VCR

Press [PLAY B]. Then press

[PAUSE F] at the point you wish to

6 7

start recording.

Press [VCR].

Make sure to select a recording mode using

[REC MODE].

Press [D.DUBBING].

DVD to VCR duplication will start.

Press [STOP C] to stop the recording.

Connections Basic Setup Function Setup VCR Functions

Recording

Playback Editing

Note

• When you turn off the unit after setting the dubbing mode to DVD VCR, the setting will be set to VCR DVD

automatically.

• You cannot change the output mode during VCR to DVD or DVD to VCR duplication.

For Audio CD to VCR duplication:

• This function is available on Audio CD, not MP3 files.

For VCR to DVD duplication:

• The playback sound mode is followed by the setting of VCR playback sound mode on page 79. Set the playback sound mode to which you wish to record to the DVD.

• This unit will automatically stop the duplication if playback with no image is for more than 3 minutes during VCR to DVD duplication.

Others Español

39EN 39EN

Page 42

INFORMATION ON PLAYBACK

Before you play back DVD, read the following information.

Playable Discs and Files

This unit is compatible to play back the following discs. To play back a DVD, make sure that it meets the requirements for region codes and color systems as described below. You can play back discs that have the following logos will play back on the unit. Other disc types are not guaranteed to play back.

LogosPlayable discs

DVD-video

DVD+RW

DVD+R

DVD-RW (Finalized video mode discs only)

DVD-R (Finalized video mode discs only)

CD-DA (audio CD)

Color Systems

DVD is recorded in different color systems throughout the world. The most common color system is NTSC (which is used primarily in the United States and Canada). This unit uses NTSC, so DVD you play back must be recorded in the NTSC system. You cannot play back DVD recorded in other color systems.

Region Codes

This unit has been designed to play back DVD with region 1. DVD must be labeled for ALL regions or for region 1 in order to play back on the unit. You cannot play back DVD that are labeled for other regions. Look for the symbols on the right on your DVD. If these region symbols do not appear on your DVD, you cannot play back the DVD in this unit.

The number inside the globe refers to region of the world. A DVD labeled for a specific region can only play back on the unit with the same region code.

PBC (playback control) for Video CD

You can select images or information on the menu screen by activating the PBC (playback control) function of the video CD. This unit conforms to ver.1.1 and ver. 2.0 of video CD standard with PBC function. Ver.1.1 (without PBC function): You can enjoy playback picture as well as music CD. Ver.2.0 (with PBC function): While using a video CD with PBC function, “PBC” appears on the TV screen.

video CD

CD-RW

CD-R

MediaPlayable les

CD-DA

MP3

is a trademark of DVD Format/Logo Licensing Corporation.

CD-RW/-R

Unplayable Discs

The following discs will not play back on this unit.

• CD-ROM

• DVD-RAM • Video Single Disc (VSD)

• DVD-ROM • DVD-audio

• Unfinalized disc

• DVD contains MP3 and DVD or CD contains Windows Media™ Audio/JPEG files

• DVD-R or DVD-RW recorded in VR mode or non compatible recording format

On the following disc, the sound may not be heard.

• Super audio CD - Only the sound on the CD layer can be heard. The sound on the high-density super audio CD layer cannot be heard.

• Compact Disc-Interactive (CD-I)

Note

• PBC setting turns to “ON” when loading video CD with PBC function, thus, even after setting PBC to “OFF” and ejecting the video CD then reloading the video CD, this setting turns to “ON” automatically.

• Some operations cannot be performed while PBC function is on. Cancel PBC function temporarily to perform those operations by following the instruction below.

1) Press [SETUP].

2) Use [K / L] to select “CD Playback Mode”, then press [OK].

“CD Playback Mode” menu will appear.

3) Use [K / L] to select “PBC (Video CD only)”, then press [OK].

4) Use [K / L] to select “ON” or “OFF”, then press [OK].

Your setting will be activated.

You can play back interactive software using menu screens. Refer to instructions in the video CD.

Hint for DVD Playback

The contents of DVD are generally divided into titles. Titles may be further subdivided into chapters.

title 1 title 2

chapter 1 chapter 2 chapter 1 chapter 2 chapter 3

track 1 track 2 track 3 track 4 track 5

folder 1 folder 2

file 1 file 2 file 3 file 4 file 5

DVD-video

audio CD, video CD

MP3

40 EN40 EN

Page 43

Direct Playback

SOURCE

TIMER SET

DISPLAY OPEN/CLOSE

ABC DEF.@/:

123

JKL MNOGHI

456

PQRS

TUV WXYZ

SPACETIMER CLEAR

TRACKING

DVD

VCR DVD

BASIC PLAYBACK

Press [STANDBY-ON yy].

STANDBY-ON

OPEN/CLOSE

SETUPDISC MENU

RETURNTITLE

iji

+--

1 2

Turn on the TV and be sure to select the input to which the unit is connected.

Press [DVD].

Press [OPEN/CLOSE A] to open the

disc tray and insert your disc with its label facing up.

* Make sure the disc is compatible with this unit.

(Refer to page 40 for the list of compatible discs.)

Press [OPEN/CLOSE A] to close the

disc tray.

It may take a while to load

the disc completely.

Introduction

Connections Basic Setup Function Setup VCR Functions

Recording

Align the disc to the disc tray guide.

Playback

REC MODE D.DUBBING

CM SKIP

SEARCH RAPID PLAY

AUDIOREC

NB552

Note

• Some discs may start playback automatically.

• You can select images or information on the menu screen by activating PBC (playback control) function (page 40).

Press [PLAY B] to start playback.

If you are playing back a DVD-video or video CD

with PBC function, a menu may appear. Refer to “Using the Title / Disc Menu” on page

45.

Press [STOP C] once to stop playback

temporarily.

• Refer to “Resume Playback” on page 46.

Editing

Others Español

41EN 41EN

Page 44

Playback from the Title List

BASIC PLAYBACK

STANDBY-ON

SOURCE

TIMER SET

DISPLAY OPEN/CLOSE

OPEN/CLOSE

ABC DEF.@/:

123

JKL MNOGHI

456

PQRS

TITLE

CM SKIP

TUV WXYZ

7809

SPACE

SPACETIMER CLEAR

TRACKING

VCR DVD

REC MODE D.DUBBING

SEARCH RAPID PLAY

SETUPDISC MENU

RETURNTITLE

iji

+--

DVD

AUDIOREC

Press [STANDBY-ON yy].

Turn on the TV and be sure to select the input to

which the unit is connected.

Press [DVD].

Press [OPEN/CLOSE A] to open the

disc tray and insert your disc with its

label facing up.

Align the disc to the disc tray guide.

* Make sure the disc is compatible with this unit.

(Refer to page 40 for the list of compatible discs.)

Press [OPEN/CLOSE A] to close the

disc tray.

It may take a while to load

the disc completely.

• To exit the title list, press [STOP C].

• To resume the title list, press [TITLE].

NB552

Note

• Some discs may start playback automatically.

• You can also start playback by pressing [PLAY B] instead of [OK] at step 4.

42 EN42 EN

Page 45

BASIC PLAYBACK

Introduction

Use [K / L] to select a desired title,

then press [OK].

• For Video CD, when “PBC (Video CD only)” in “CD playback Mode” menu is set to “ON”, the video CD main menu will appear when inserting a disc. In such case, select a numbered menu with [the Number buttons].

• Press [B] to display the next page, and press [{] to display the previous page.

If you want to see disc information, press [{ ] when the first page of the title list is displayed or press [ K ] when the first title is selected but not when “Play”, “Edit” or “Overwrite” is highlighted.

e.g.) DVD+RW

1 SP (2Hr)

NOV/21/07 11:00AM NOV/21/07 0:20:44

NOV/22/07 11:35 NOV/22/07 0:10:33

EMPTY TITLE 1:37:52 SP(2Hr)

Disc DVD+RW

Total Titles 3

Disc Space Used 0:30:48

Disc Protect OFF

Make Edits Compatible Needed

E1 SP

AM E1 EP

No Disc Name

Use [K / L] to select “Play”, then

press [OK].

Playback will start.

Play

Edit

Overwrite

1 SP (2Hr)

NOV/21/07 11:00AM NOV/21/07 0:20:44

NOV/22/07 11:35 NOV/22/07 0:10:33

EMPTY TITLE 1:37:52 SP(2Hr)

E1 SP

AM E1 EP

Press [STOP C] once to stop playback

temporarily.

• Refer to “Resume Playback” on page 46. To eject the disc, press [OPEN/CLOSE A] to

open the disc tray, then remove the disc before turning off the unit.

Connections Basic Setup Function Setup VCR Functions

Recording

Playback

Editing

e.g.) DVD+R

No Disc Name

Disc DVD+R

Total Titles 5

Disc Space Used 1:30:48

Disc Protect OFF

Finalize Finalized

1. Disc name (Default “No Disc Name”)

2. Disc type (DVD+RW/DVD+R/ DVD-RW/DVD-R)

3. Total number of title (include “EMPTY TITLE”)

4. Total time of recorded disc space

5. Status of disc protection (“ON” is protected disc.)

6. Making edits compatible/finalize

• When DVD+RW is inserted:

If the disc needs to be set “Make Edits Compatible”, “Needed” is displayed. Otherwise, “Not Needed” is displayed. (Refer to page 67.)

• When DVD+R, DVD-RW or DVD-R is inserted:

If “Finalize” is done, “Finalized” is displayed. Otherwise, “Unfinalized” is displayed.

Others Español

43EN 43EN

Page 46

BASIC PLAYBACK

Playing Back an Audio CD and a CD-RW/-R with MP3 Files

STANDBY-ON

SOURCE

TIMER SET

DISPLAY OPEN/CLOSE

OPEN/CLOSE

ABC DEF.@/:

123

JKL MNOGHI

456

PQRS

DISC MENU

TITLE RETURN

CM SKIP

TUV WXYZ

7809

SPACE

SPACETIMER CLEAR

TRACKING

VCR DVD

REC MODE D.DUBBING

SEARCH RAPID PLAY

NB552

SETUPDISC MENU

RETURNTITLE

iji

+--

AUDIOREC

Note

• The audio source of MP3 files cannot be recorded as digital sound by an MD or DAT deck.

• Files whose extension is other than “.mp3(MP3)” will not be listed.

• Some unplayable folders or files may be listed due to the recording status.

Follow steps 1 to 2 in “Direct

Playback” on page 41.

Press [OPEN/CLOSE A] to close the

disc tray.

When selecting track/file:

Playback will start.

When selecting the folder (Not available for audio CD):

The files in the folder will appear. Use [K / L] to select the file or folder you want to play

back, then press [OK].

• Press [PLAY B], [OK] or [B] to move to any lower

hierarchies.

• Press [s] or [RETURN] to move back to the previous

hierarchy.

Hints for audio CD tracks and MP3 files:

• Folders are shown by

• Audio CD tracks are shown by

• MP3 files are shown by

• The system can recognize up to 255 folders, up to 99 tracks/999 files.

• Letters of a file/folder name overflowing the given space will be displayed as “...”. Unrecognizable characters will be replaced with asterisks.

• If there are no files in the folder, “No Files” will be displayed.

It is recommended that files to be played back in this unit are recorded under the following specifications:

<MP3>

• Sampling frequency : 44.1 kHz or 48 kHz.

• Constant bit rate : 112 kbps - 320 kbps

It may take a while to load

the disc completely.

When an audio CD is inserted, track list will appear.

When a CD-RW/-R with MP3 files is inserted, file list will appear.

• To exit the track/file list, press [STOP C].

• To resume the track/file list, press [TITLE].

Use [K / L] to select a desired folder

or track/file, then press [OK].

e.g.) File list

File List

DISC NAME

A B C D 1 MP3 file1 2 MP3 file2 3 MP3 file3 4 MP3 file4

1/ 2

44 EN44 EN

Page 47

BASIC PLAYBACK

Introduction

Using the Title / Disc Menu

DVD or video CD with PBC function may contain a title list, which describes the contents of the disc, or a disc menu, which guides you through the available functions in the disc.

Press [DVD] first.

1) Press [TITLE] or [DISC MENU] to call up the title list or disc menu.

2) Use [K / L / { / B] to make a selection, and then press [OK] to enable your selection.

3) Press [STOP C] to exit.

Note

• You can select a numbered menu with [the Number buttons] also.

• Menus vary among discs. Refer to the information accompanying the disc for details.

• [TITLE] or [DISC MENU] will not always be active with all DVD.

• For video CD, when “PBC (Video CD only)” in “CD Playback Mode” menu is “ON”, the video CD main menu will appear when inserting a disc.

Pause

Press [DVD] first.

1) During playback, press [PAUSE F].

Playback will be paused and sound will be muted.

2) Press [PLAY B] to return to the normal playback.

Note

• On DVD, set “Still Mode” to “Field” in “Playback” menu if pictures in the pause mode are blurred. (Refer to page 72.)

Connections Basic Setup Function Setup VCR Functions

Recording

Playback

Editing

Others Español

45EN 45EN

Page 48

SPECIAL PLAYBACK

Resume Playback

You can play back from where you stopped playing back the disc last.

Press [DVD] first.

1) During playback, press [STOP C].

The resume message will appear.

Resume ON

2) Press [PLAY B].

In a few seconds, playback will resume from the point at which it stopped last. You can resume playback at the same point even if you turn off the unit.

To cancel the resume playback and start playing back the disc from the beginning, press [STOP C] again while the playback is stopped.

Note

• For MP3 files, playback will resume from the beginning of the file at which playback was stopped.

• Some video CD with the PBC function resume playback from the beginning of the track.

Fast Forward / Fast Reverse Playback

Skipping TV Commercials During Playback

You can skip TV commercials to enjoy the recorded programs without interrupting.

Press [DVD] first.

During playback, press [CM SKIP].

Normal playback will start at 30 seconds ahead from the point you press [CM SKIP].

Every time you press [CM SKIP], the searching point will be extended by 30 seconds ahead.

You can press [CM SKIP] up to 6 times (180 seconds).

e.g.) Press [CM SKIP] once.

CM Skip 30 sec.

(forwarding 30 seconds)

Press [DVD] first.

1) During playback, press [D] or [E].

Every time you press [D] or [E], approximate speed will be changed as follows.

Fast forward or fast reverse playback across titles (for DVD) or files (for MP3 files) is not possible.

20x

normal

speed

playback

2x 20x5x 40x40x

For video CD, approximate forward/reverse speeds are 2x, 8x, 16x.

For audio CD, MP3 files, approximate speed is fixed at 8x with sound (indicated with

/ ).

2) Press [PLAY B] to return to the normal playback.

Note

• Forward/reverse speed will be indicated with icons as follows.

forward (approx. speed) 2x: 20x: 40x: reverse (approx. speed) 5x: 20x: 40x:

Playback will return to the normal playback.

46 EN46 EN

Page 49

SPECIAL PLAYBACK

Introduction

Rapid Playback

Rapid playback function is available only during playback.

This function is available only on discs recorded in the Dolby Digital format, and plays back in a slightly faster/ slower speed while keeping the sound quality just as normal playback.

Press [DVD] first.

1) During playback, press [RAPID PLAY].

B :

2) Press [PLAY B] to continue the normal playback.

Note

• Audio (language) setting cannot be changed while

• This feature may not work at some point in a disc.

• Audio is PCM during rapid playback mode except

• When using digital audio connection (COAXIAL), the

Press [RAPID PLAY] once during playback.

Plays back approximately at 0.8 times of normal playback.

Press [RAPID PLAY] twice during playback.

Plays back approximately at 1.3 times of normal playback.

Press [RAPID PLAY] 3 times to play back in normal speed. No effects.

using this mode.

when using digital audio connection.

LPCM sound (2 channel) will be output.

Slow Forward / Slow Reverse Playback

Press [DVD] first.

1) During playback, press [PAUSE F]. Then press [ D] or [E].

Every time you press [D] or [E], approximate speed will be changed as follows. (The sound will remain muted.)

To return to the normal playback, press [PLAY B].

Note

• Forward/reverse speed will be indicated with icons as follows.

forward (approx. speed) 1/16x: 1/8x: 1/3x: reverse (approx. speed) 1/16x: 1/8x: 1/4x:

• Only slow forward is available when playing back video CD.

1/8x

pause

1/16x 1/8x1/16x 1/3x1/4x

Connections Basic Setup Function Setup VCR Functions

Recording

Playback

Editing

Step by Step Playback

Press [DVD] first.

1) During playback, press [PAUSE F].

Playback will be paused and sound will be muted.

2) Press [NEXT G] repeatedly.

Playback will advance one frame (or step) at a time when you press [NEXT G] with the sound muted.

To play back step by step backward: Press [PREV H] repeatedly. Every time you press the button, the playback will go

backward by one frame.

• Press and hold [PREV H] / [NEXT G] to reverse/

advance continuously.

3) Press [PLAY B] to continue the normal playback.

Note

• Only step by step forward playback is available for playing back video CD.

Others Español

47EN 47EN

Page 50

SPECIAL PLAYBACK

Zoom

Press [DVD] first.

1) During playback, press [DISPLAY].

2) Use [{ / B] to select , then press [OK] within 1 second or wait for 1 second to display the selection menu.

e.g.) DVD-video

1/ 5 1/ 5

3) Use [K / L] to select a desired zoom factor to zoom, then press [OK].

1/ 5 1/ 5

Zoom menu will appear. There are four options (x1.0, x1.2, x1.5 and x2.0), these are displayed

excluding the current zoom rate.

0:01:00 / 1:23:45

× 1.2 × 1.5 × 2.0

DVD

Video

Marker Setting

This feature allows you to assign a specific point on a disc to be called back later.

Press [DVD] first.

1) During playback, press [DISPLAY].

2) Use [{ / B] to select second or wait for 1 second to display the marker list.

e.g.) DVD-video

1/ 5 1/ 5

3) Use [K / L] to select a desired marker number. When it reaches the desired point, press [OK].

1/ 5 1/ 5

, then press [OK] within 1

0:01:00 / 1:23:45

DVD

Video

0:01:00 / 1:23:45

DVD

---

Video

Zoom area will be displayed.

4) Use [K / L / { / B] to select a desired zoom position, then press [OK].

Zoom playback will start.

Note

• When selecting a smaller factor than the current one, the zoom area will not be displayed.

• To exit the zoom menu, press [DISPLAY] again at step 1.

• To cancel the zoom function, select “x1.0” using [K / L], then press [OK].

The title (track) number and the time will be displayed.

4) To return to the marker later: Use [K / L] to select the desired marker number,

then press [OK].

Note

• To clear a marker, select the marker number to be

cleared, then press [CLEAR].

• All markers will be erased when you operate these operations listed below.

– Opening the disc tray – Turning off the power – Record on a recordable disc

• You can mark up to 6 points.

• Marker setting is not available when you play back the video CD with PBC function.

48 EN48 EN

Page 51

Introduction

Title / Chapter Search

Using [PREV H] / [NEXT G]

Press [DVD] first.

1) During playback, press [NEXT G] to skip the current title or chapter and move to the next.

The title or chapter will move forward by one at a time.

• If there is no chapter in one title, the current title will

be skipped.

To go back to the beginning of the current title or chapter, press [PREV H].

Press it repeatedly to go to the previous title or chapter. The title or chapter will move backward one at a time.

Using [DISPLAY]

Press [DVD] first.

1) During playback, press [DISPLAY].

2) Use [{ / B] to select

e.g.) DVD-video

1/ 5 1/ 5

, then press [OK].

0:01:00 / 1:23:45

DVD

Video

Track Search

Using [PREV H] / [NEXT G]

Press [DVD] first.

1) During playback, press [NEXT G] to skip the current track/file and move to the next.

The track/file will move forward one at a time. To go back to the beginning of the current track/file,

press [PREV H]. Press it repeatedly to go to the previous track/file. The

track/file will move backward one at a time.

Using [DISPLAY]

Press [DVD] first.

1) During playback, press [DISPLAY].

2) Use [{ / B] to select

e.g.) audio CD

1/ 5CD0:00:15 / 0:05:00

e.g.) MP3 files

1/ 5 0:00:15

, then press [OK].

MP3

Connections Basic Setup Function Setup VCR Functions

Recording

Playback

The number next to will be highlighted.

3) Title: Use [K / L] or [the Number buttons] to enter a

desired title number to search, then press [OK].

Title search will start.

Chapter: Press [B] to move to the number next to

for

chapter. Use [K / L] or [the Number buttons] to enter a

desired chapter number to search, then press [OK].

After the search, playback will start automatically.

Note

• In search mode display, total numbers of each search contents (title/chapter/time) are shown as a denominator.

1/ 5 1/ 5 0:01:00 / 1:23:45

total number of titles

total number of chapters

DVD

Video

total time of the title

Editing

The number next to will be highlighted.

3) Use [K / L] or [the Number buttons] to enter a desired track/file number to search, then press [OK].

After the search, playback will start automatically.

Note

• During CD playback you can enter a track number

directly using [the Number buttons] for track search without displaying the menu.

• Track search is not available when you play back the video CD with PBC function.

Others Español

49EN 49EN

Page 52

Time Search

Press [DVD] first.

1) During playback, press [DISPLAY].

2) Use [{ / B] to select

e.g.) DVD-video

1/ 5 1/ 5 0:01:00 / 1:23:45

e.g.) audio CD

1/ 5CD0:00:15 / 0:05:00

The number next to will be highlighted. To move to the number next to , press [B].

When time search is not available, counter are not displayed.

3) Use [K / L / { / B] or [the Number buttons] to enter a desired time to search, then press [OK].

After the search, playback will start automatically.

, then press [OK].

DVD

Video

and time

Note

• Time search is available only in the same track, file or title.

• Time search is not available when you play back the video CD with PBC function.

50 EN50 EN

Page 53

REPEAT / RANDOM / PROGRAM PLAYBACK

Introduction

Repeat Playback

Available repeat function may vary depending the discs.

Press [DVD] first.

1) During playback press [DISPLAY].

2) Use [{ / B] to select second or wait for 1 second to display the selection menu.

1/ 5 1/ 5

3) Use [K / L] to select a desired option to repeat, then press [OK].

e.g.) DVD-video

1/ 5 1/ 5

e.g.) audio CD, video CD

1/ 5CD0:00:15 / 0:05:00

, then press [OK] within 1

0:01:00 / 1:23:45

DVD

Video

0:01:00 / 1:23:45

DVD

Video

OFF

Track All

A – B

OFF Title Chapter A – B

Note

• Point B for the repeat A-B playback should be set within the same title or track as point A.

• To cancel the repeat playback, select “OFF” at step 3. The repeat setting will also be canceled when you stop playback.

• You cannot select “Group” during the random playback of MP3 files.

• Repeat playback is not available when you play back the video CD with PBC function.

Random Playback

You can play back a disc randomly instead of playing back in the original order.

Press [DVD] first.

1) Press [SETUP].

2) Use [K / L] to select “CD Playback Mode”, then press [OK].

“CD Playback Mode” menu will appear.

3) Use [K / L] to select “Random Play”, then press [OK].

Random playback will start.

Connections Basic Setup Function Setup VCR Functions

Recording

Playback

e.g.) MP3 files

1/ 5 0:00:15

OFF

Track All Group

MP3

The selected repeat playback will start.

1/ 5 1/ 5

0:01:00 / 1:23:45

DVD

Repeat

Title

Title:

The current title will be played back repeatedly.

Chapter:

The current chapter will be played back repeatedly.

All:

The current disc will be played back repeatedly.

A-B:

Desired section can be played back repeatedly.

1) Use [K / L] to select “A-B”, then press [OK].

2) Press [OK] at the desired starting point A.

3) Press [OK] at the desired ending point B.

Track:

The current track or file will be played back repeatedly.

Group:

The current folder will be played back repeatedly.

Note

• To cancel random playback, press [STOP C] twice

during random playback. “OFF” appears on the TV screen.

• For video CD with PBC function, the PBC setting will be switched to off automatically when you start random playback.

Editing

Others Español

51EN 51EN

Page 54

REPEAT / RANDOM / PROGRAM PLAYBACK

Program Playback

You can program the disc to play back in your desired order.

Press [DVD] first.

1) Press [SETUP].

2) Use [K / L] to select “CD Playback Mode”, then press [OK].

“CD Playback Mode” menu will appear.

3) Use [K / L] to select “Program Play”, then press [OK].

4) Use [K / L] to select a desired track, then press [OK] or [B].

CD Playback Mode

Program Play

-- -- -- -- -- -- -- -- --

-- -- -- -- -- -- -- -- -- --

0:00:00Total

Repeat this step until you program all the desired tracks.

5) Press [PLAY B].

CD Playback Mode

Program Play

04 10 06 -- -- -- -- -- --

-- -- -- -- -- -- -- -- -- --

0:31:07Total

Program playback will start.

Note

• To erase tracks you selected, press [CLEAR] at step 4.

• You can make program settings up to 50 tracks.

• To cancel program playback, press [STOP C] twice

during program playback. “OFF” appears on the TV screen.

• You may also select a desired track using [the Number buttons] at step 4.

• For video CD with PBC function, the PBC setting will be switched to off automatically when you start program playback.

52 EN52 EN

Page 55

SELECTING THE FORMAT OF AUDIO AND VIDEO

You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back.

Introduction

Switching Subtitles

DVD-video may have subtitles in 1 or more languages. Available subtitle languages can be found on the disc case. You can switch subtitle languages anytime during playback.

Press [DVD] first.

1) During playback, press [DISPLAY].

2) Use [{ / B] to select second or wait for 1 second to display the selection menu.

1/ 5 1/ 5

3) Use [K / L] to select a desired subtitle language, then press [OK].

1/ 5 1/ 5

OFF

1.English

Subtitle will be displayed in the selected language. When selecting “OFF”, subtitle will disappear.

Note

• Some discs will only allow you to change the subtitle

from the disc menu. Press [TITLE] or [DISC MENU] to display the disc menu.

• If a 4-digit language code appears in the subtitle menu, refer to the “LANGUAGE CODE” on page 85.

, then press [OK] within 1

0:01:00 / 1:23:45

DVD

Video

0:01:00 / 1:23:45

DVD

Video

Switching Audio Soundtrack

When playing back a DVD-video recorded with 2 or more soundtracks (these are often in different languages), you can switch them during playback.

When playing back video CD, audio CD you can switch “L/R”(stereo), “L”(left) or “R”(right).

Press [DVD] first.

1) During playback, press [DISPLAY].

2) Use [{ / B] to select second or wait for 1 second to display the selection menu.

3) Use [K / L] to select a desired audio soundtrack or audio channel, then press [OK].

For DVD-video

• Audio soundtrack will switch.

1/ 5 1/ 5

1.Dolby Digital 5.1ch English

2.Dolby Digital 2ch English

• If the title contains both main and sub audio, you can

further select “L” (main), “R” (sub), or “L/R” (mixed of main and sub).

For audio CD, video CD

• Audio channel will switch. e.g.) audio CD

1/ 5CD0:00:15 / 0:05:00

1. L/R

2. L

3. R

, then press [OK] within 1

0:01:00 / 1:23:45

DVD

Video

Connections Basic Setup Function Setup VCR Functions

Recording

Playback

Editing

Note

• Some discs will only allow you to change the

soundtrack from the disc menu. Press [TITLE] or

[DISC MENU] to display the disc menu.

Others Español

53EN 53EN

Page 56

SELECTING THE FORMAT OF AUDIO AND VIDEO

Switching Virtual Surround System

You can enjoy stereophonic virtual space through your existing 2 channel stereo system.

Press [DVD] first.

1) During playback, press [DISPLAY].

2) Use [{ / B] to select second or wait for 1 second to display the selection menu.

e.g.) DVD-video

1/ 5 1/ 5

3) Use [K / L] to select “OFF”, “Type 1” or “Type 2”, then press [OK].

e.g.) DVD-video

1/ 5 1/ 5

OFF : no effect Type 1 : natural effect Type 2 : emphasized effect

Note

• Select “OFF” in a case sound is distorted.

• The setting will be kept even when the unit is turned off.

, then press [OK] within 1

0:01:00 / 1:23:45

DVD

Video

0:01:00 / 1:23:45

DVD

OFF Type 1 Type 2

Video

Switching Camera Angles

Some DVD-video have scenes shot from 2 or more angles. Angle information should be on the disc case if

the disc contains multi-angle scenes.

Press [DVD] first.

1) During playback, press [DISPLAY].

2) Use [{ / B] to select

, then press [OK].

e.g.) DVD-video

1/ 5 1/ 5

0:01:00 / 1:23:45

DVD

Video

Angle icon appears when a switching camera angle is available.

Angle will switch each time you press [OK].

Note

• Angle icon does not appear on the TV screen in a case you set “Angle Icon” to “OFF” in “Playback” menu. Refer to page 72.

Reducing Block Noise

Press [DVD] first.

1) During playback, press [DISPLAY].

2) Use [{ / B] to select second or wait for 1 second to display the selection menu.

e.g.) DVD-video

1/ 5 1/ 5

, then press [OK] within 1

0:01:00 / 1:23:45

DVD

Video

54 EN54 EN

3) Use [K / L] to select a desired option, then press [OK].

1/ 5 1/ 5

OFF Type 1 Type 2

0:01:00 / 1:23:45

DVD

Video

Your setting will be activated. This function reduces noise in the playback picture. If

noises appear on the TV screen during playing back discs recorded in long time recording mode such as EP or SLP, select “Type 1” or “Type 2”.

(“Type 2” is more effective.) When playing back discs with a few noises such as

DVD-video, select “OFF”.

Page 57

INFORMATION ON DISC EDITING

Guide to a Title List Editing Discs

Introduction

Title list allows you to check the titles recorded on the disc easily. You can choose a title to play back from this list and easily edit the titles as you prefer.

Press [TITLE].

NOV/21/07 11:00AM NOV/21/07 0:20:44

Play

Edit

NOV/22/07 11:35

Overwrite

NOV/22/07 0:10:33

EMPTY TITLE 1:37:52 SP(2Hr)

Edit

NOV/22/07 11:35AM E1 EP

AM E1 EP

SP (2Hr)

E1 SP

Title Delete

Edit Title Name

Chapter Mark

Hide Chapter

Index Picture

Title Dividing

0:00:59

789

You can edit discs for the following items. Be sure that once you edit titles, they will not remain as original.

• Deleting Titles (Refer to page 56.)

• Putting Names on Titles (Refer to page 57.)

• Setting Chapter Marks (Refer to page 58.)

• Clearing Chapter Marks (Refer to pages 59-60.)

• Hiding Chapters (Refer to page 61.)

• Setting Pictures for Thumbnails (Refer to page 62.)

• Dividing a Title (DVD+RW/DVD-RW only)

(Refer to page 63.)

• Putting Name on Disc (Refer to page 64.)

• Setting or Releasing Disc Protect (Refer to page 65.)

• Erasing Disc (Refer to page 66.)

• Making Edits Compatible (Refer to page 67.)

Note

• When selecting “Edit” on pop-up menu of the title list and edit the title, the title list is displayed after writing the edited contents onto the disc.

• The capacity indicator in the right side of the title list may not indicate the precise capacity in the disc.

• The capacity indicator may not indicate the capacity for the titles of which recording time is short.

• Once you have finalized a DVD+R/DVD-R, you cannot edit or record anything on that disc.

Connections Basic Setup Function Setup VCR Functions

Recording Playback

1. Title list: List of the titles recorded on the disc, and

their information.

2. Arrow: Indicating there is a previous / next page.

3. Title information: On the first line, title name

(editable) is displayed. On the second line, the length of the title is displayed. Empty title: The portion of the disc where there is no recordings are made. As for the empty title, available recording time by the selected recording mode is displayed on the second line.

4. Recording mode: Currently selected recording mode

is displayed here.

5. Capacity indicator: Indicating the position and the

amount of each title in the disc. The portion for the selected title is highlighted.

6. Thumbnails: A cut from the recorded content is

displayed here.

7. Submenu: Submenus for the selected menu are

displayed here.

8. Title name (editable): If you do not name the title,

the recorded date, time, selected external input position, and the recording mode are displayed here.

9. Progress bar: Indicating the progress of the

playback.

10. Preview window: Preview of the selected title is

displayed here.

11. Playback status: Indicating the current playback

status of the selected title.

Press [STOP C] to exit the title list.

Editing

Others Español

55EN 55EN

Page 58

Deleting Titles

EDITING DISCS

You can delete titles which you do not need anymore. Please be advised that the titles once deleted cannot be

brought back to the disc. For DVD+RW/DVD-RW, when the last recorded title in the

title list is deleted, the available disc space to record on will be increased. For DVD+R/DVD-R, the disc space to record on will not be changed.

STANDBY-ON

TIMER SET

SOURCE

123

456

PQRS

TITLE

DISPLAY OPEN/CLOSE

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACETIMER CLEAR

SETUPDISC MENU

RETURNTITLE

iji

Use [K / L] to select “Edit”, then

press [OK].

Play

Edit

Overwrite

NOV/21/07 11:00AM NOV/21/07 0:20:44

NOV/22/07 11:35 NOV/22/07 0:10:33

EMPTY TITLE 1:37:52 SP(2Hr)

SP (2Hr)

E1 SP

AM E1 EP

Use [K / L] to select “Title Delete”,

then press [OK].

Edit

NOV/21/07 11:00AM E1 SP

Title Delete

Edit Title Name

Chapter Mark

Hide Chapter

Index Picture

Title Dividing

0:00:59

Use [K / L] to select “Yes”, then press

[OK].

Edit - Title Delete

Yes

Press [DVD] first.

Press [TITLE].

Use [K / L] to select a desired title,

then press [OK].

NOV/21/07 11:00AM NOV/21/07 0:20:44

NOV/22/07 11:35 NOV/22/07 0:10:33

EMPTY TITLE 1:37:52 SP(2Hr)

Note

• Deleted part of the titles in the capacity indicator changes in color.

• As for DVD+RW/DVD-RW if you delete the title, deleted title will be displayed as “EMPTY TITLE”.

56 EN56 EN

SP (2Hr)

E1 SP

AM E1 EP

NOV/21/07 11:00AM E1 SP

0:00:59

After that, “Are you sure?” will appear, select “Yes” and then press [OK].

Title will be deleted. Data will be written onto the disc momentarily.

Writing to Disc 90%

This operation may take a

while to be completed.

After editing is complete, the title list will appear. e.g.) DVD+RW/DVD-RW

EMPTY TITLE 0:21:14 SP(2Hr)

NOV/22/07 11:35 NOV/22/07 0:10:33

EMPTY TITLE 1:37:52 SP(2Hr)

SP (2Hr)

AM E1 EP

Page 59

EDITING DISCS

Putting Names on Titles

You can put title names on the titles and change the names from this menu.

STANDBY-ON

TIMER SET

SOURCE

123

456

PQRS

7809

Follow steps 1 to 3 in “Deleting

Titles” on page 56 to display “Edit”

menu.

Use [K / L] to select “Edit Title

Name”, then press [OK].

Edit

NOV/21/07 11:00AM E1 SP

To enter a title name, follow the

steps of “Guide to Edit Title Name”

on this page.

Edit - Edit Title Name

DISPLAY OPEN/CLOSE

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE

SPACETIMER CLEAR

CLEAR

SETUPDISC MENU

RETURNTITLE

RETURN

iji

Title Delete

Edit Title Name

Chapter Mark

Hide Chapter

Index Picture

Title Dividing

0:00:59

ABC

abc

123

@! ?

character set

Use [K / L] to select “Yes”, then press

[OK].

Edit - Edit Title Name

Yes

MY FAVORITE

0:00:59

The name you entered will be activated for the title.

After this operation is completed,

press [RETURN] to exit.

Guide to Edit Title Name

1) Use [K / L] to select a desired character set, then

2) Follow the list below, use [the Number buttons]

Press

*1 Press 1, character set will be changed to the “ @!? ”

*2 Press

• To delete letters, press [CLEAR] repeatedly.

• Use [s / B] to move the cursor to the left and right.

• You can enter up to 30 letters.

Data will be written onto the disc momentarily.

This operation may take a

while to be completed.

press [OK].

repeatedly until the desired letter appears.

Select

ABC

(*1) (*1)

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

abc @ ! ?

abc

def

ghi

jkl

mno

pqrs

tuv

wxyz

123

! ” # $ % & ’ ( )

+ , - . / : ; < = >

* ? @ [ ] ^ _ { | }

mode automatically.

to 9, character set will be changed to the

previous input mode automatically.

Holding [CLEAR] to delete all letters.

(*2)

Introduction

Connections Basic Setup Function Setup VCR Functions

Recording Playback

Editing

Others Español

0:00:59

area for entering title names

When you finish entering a title name, press [OK].

Note

• Undefined letters in a title name are shown by “*”. If you delete them, adjoining letters may change to “*” or other.

57EN 57EN

Page 60

Setting Chapter Marks

EDITING DISCS

You can put chapter marks in each title. Once a chapter is marked, you can use it for the chapter search feature.

STANDBY-ON

SOURCE

TIMER SET

DISPLAY OPEN/CLOSE

ABC DEF.@/:

123

JKL MNOGHI

456

PQRS

TUV WXYZ

SPACETIMER CLEAR

h g

TRACKING

VCR DVD

SETUPDISC MENU

RETURNTITLE

RETURN

iij

iji

+--

Follow steps 1 to 3 in “Deleting

Titles” on page 56 to display “Edit”

menu.

Use [K / L] to select “Chapter Mark”,

then press [OK].

Submenu will appear.

Press [PLAY B] and then [PAUSE F]

to decide the point at which you will

create a new chapter mark.

• It is convenient to use [PREV H], [NEXT G], [E] and [D] for finding the point to add a

new chapter mark.

Use [K / L] to select “Add”, then press

[OK].

Edit - Chapter Mark

Chapter 2/ 2

NOV/21/07 11:00AM E1 SP

Add

Delete

Delete All

0:00:59

REC MODE D.DUBBING

CM SKIP

SEARCH RAPID PLAY

AUDIOREC

NB552

Note

• When the number of chapter marks in a title is 99 and the number of chapter marks in a disc is 254, chapter marks cannot be added.

• Besides the above-mentioned, it is not likely to be able to add according to recorded time and number of chapters.

• Remaining time of the disc may decrease when adding chapter marks or increase when clearing chapter marks depending on the recording time or edited contents.

Use [K / L] to select “Yes”, then press

[OK].

Edit - Chapter Mark - Add

Yes

Chapter 2/ 2

NOV/21/07 11:00AM E1 SP

A new chapter mark will be added.

0:00:59

Press [RETURN] twice to exit.

Data will be written onto the disc momentarily.

This operation may take a

while to be completed.

58 EN58 EN

Page 61

Clearing Chapter Marks

STANDBY-ON

TIMER SET

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACETIMER CLEAR

TRACKING

VCR DVD

REC MODE D.DUBBING

SEARCH RAPID PLAY

DISPLAY OPEN/CLOSE

+--

SOURCE

123

456

PQRS

CM SKIP

EDITING DISCS

SETUPDISC MENU

RETURNTITLE

RETURN

iij

iji

AUDIOREC

Follow steps 1 to 3 in “Deleting

Titles” on page 56 to display “Edit”

menu.

Use [K / L] to select “Chapter Mark”,

then press [OK].

Submenu will appear.

Use [PREV H] / [NEXT G] to select

a chapter mark to be deleted.

Use [K / L] to select “Delete”, then

press [OK].

Use [K / L] to select “Yes”, then press

[OK].

Edit - Chapter Mark - Delete

Yes

Chapter 2/ 2

NOV/21/07 11:00AM E1 SP

The selected chapter mark will be deleted.

0:00:59

Introduction

Connections Basic Setup Function Setup VCR Functions

Recording Playback

Editing

NB552

Note

• Remaining time of the disc may decrease when adding chapter marks or increase when clearing chapter marks depending on the recording time or edited contents.

Press [RETURN] twice to exit.

Data will be written onto the disc momentarily.

This operation may take a

while to be completed.

Others Español

59EN 59EN

Page 62

EDITING DISCS

Clearing Chapter Marks (cont’d)

STANDBY-ON

TIMER SET

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACETIMER CLEAR

TRACKING

VCR DVD

REC MODE D.DUBBING

SEARCH RAPID PLAY

DISPLAY OPEN/CLOSE

SETUPDISC MENU

RETURNTITLE

RETURN

iji

+--

AUDIOREC

SOURCE

123

456

PQRS

CM SKIP

To delete all chapter marks:

Follow steps 1 to 3 in “Deleting

Titles” on page 56 to display “Edit”

menu.

Use [K / L] to select “Chapter Mark”,

then press [OK].

Submenu will appear.

Use [K / L] to select “Delete All”,

then press [OK].

Use [K / L] to select “Yes”, then press

[OK].

Edit - Chapter Mark - Delete All

Chapter 2/ 2

NOV/21/07 11:00AM E1 SP

Yes

0:00:59

NB552

Note

• Remaining time of the disc may decrease when adding chapter marks or increase when clearing chapter marks depending on the recording time or edited contents.

Use [K / L] to select “Yes”, then press

[OK].

Edit - Chapter Mark - Delete All

Are you sure?

Yes

Chapter 2/ 2

NOV/21/07 11:00AM E1 SP

All chapter marks will be deleted.

0:00:59

Press [RETURN] twice to exit.

Data will be written onto the disc momentarily.

This operation may take a

while to be completed.

60 EN60 EN

Page 63

Hiding Chapters

EDITING DISCS

Introduction

You can hide chapters from the title list. Hidden chapters are skipped during playback.

STANDBY-ON

SOURCE

TIMER SET

DISPLAY OPEN/CLOSE

ABC DEF.@/:

123

JKL MNOGHI

456

PQRS

CM SKIP

TUV WXYZ

SPACETIMER CLEAR

TRACKING

VCR DVD

REC MODE D.DUBBING

SEARCH RAPID PLAY

SETUPDISC MENU

RETURNTITLE

RETURN

iij

iji

+--

AUDIOREC

Follow steps 1 to 3 in “Deleting

Titles” on page 56 to display “Edit”

menu.

Use [K / L] to select “Hide Chapter”,

then press [OK].

Submenu will appear.

Use [PREV H] / [NEXT G] to decide

the chapter to be hidden.

Use [K / L] to select “Hidden”, then

press [OK].

Edit - Hide Chapter

Visible

Hidden

Chapter 2/ 2 Visible

NOV/21/07 11:00AM E1 SP

0:00:59

After this operation is completed,

press [RETURN] twice to exit.

Data will be written onto the disc momentarily.

This operation may take a

while to be completed.

Connections Basic Setup Function Setup VCR Functions

Recording Playback

Editing

NB552

Note

• ”Hidden” will be displayed in the preview window while previewing the hidden chapter.

• When you make all chapters in the title “Hidden”, “Hidden” is displayed in a thumbnail of the title list.

Hidden

NOV/21/07 11:00 NOV/21/07 0:20:44

NOV/22/07 11:35AM NOV/22/07 0:10:33

EMPTY TITLE 1:37:52 SP(2Hr)

SP (2Hr)

AM E1 SP

E1 EP

If you want hidden chapters to be “Visible”, select the chapter to be shown. Then use [K / L] to select “Visible” at the step 4 on this page.

Data will be written onto the disc momentarily. After that, title list is displayed.

Others Español

61EN 61EN

Page 64

EDITING DISCS

Setting Pictures for Thumbnails

You can set your desired scene as a thumbnail for each title.

STANDBY-ON

SOURCE

TIMER SET

DISPLAY OPEN/CLOSE

ABC DEF.@/:

123

JKL MNOGHI

456

PQRS

TUV WXYZ

SPACETIMER CLEAR

h g

TRACKING

VCR DVD

SETUPDISC MENU

RETURNTITLE

RETURN

iij

iji

+--

Follow steps 1 to 3 in “Deleting

Titles” on page 56 to display “Edit”

menu.

Use [PREV H], [NEXT G], [E],

[D], [PAUSE F] and [PLAY B] to

decide the picture you want to select as a thumbnail.

Use [K / L] to select “Index Picture”,

then press [OK].

Use [K / L] to select “Yes”, then press

[OK].

Edit - Index Picture

Yes

NOV/21/07 11:00AM E1 SP

A picture for thumbnail will be set.

0:00:59

REC MODE D.DUBBING

CM SKIP

SEARCH RAPID PLAY

AUDIOREC

NB552

Note

• If the selected picture for a thumbnail is overwritten, the index picture is reset to the first scene of the title.

Press [RETURN] to exit.

Data will be written onto the disc momentarily.

This operation may take a

while to be completed.

62 EN62 EN

Page 65

Dividing a Title

EDITING DISCS

Introduction

You can divide one title into 2 new titles.

STANDBY-ON

SOURCE

TIMER SET

DISPLAY OPEN/CLOSE

ABC DEF.@/:

123

JKL MNOGHI

456

PQRS

CM SKIP

TUV WXYZ

SPACETIMER CLEAR

h g

TRACKING

VCR DVD

REC MODE D.DUBBING

SEARCH RAPID PLAY

SETUPDISC MENU

RETURNTITLE

iij

iji

+--

AUDIOREC

Follow steps 1 to 3 in “Deleting

Titles” on page 56 to display “Edit”

menu.

Use [PREV H], [NEXT G], [E],

[D], [PAUSE F] and [PLAY B] to

decide the point at which you will divide the title.

Use [K / L] to select “Title Dividing”,

then press [OK].

Use [K / L] to select “Yes”, then press

[OK].

Edit - Title Dividing

Yes

NOV/21/07 11:00AM E1 SP

The title will be divided into 2 new titles. Both title names are identical, and index pictures

are reset to the first scene at this point.

Data will be written onto the disc momentarily.

This operation may take a

while to be completed.

0:00:59

Connections Basic Setup Function Setup VCR Functions

Recording Playback

Editing

NB552

Note

• You cannot divide a title of the disc when the number of recording titles reaches the maximum of 49, and the number of recording chapters reaches the maximum of 254.

Others Español

63EN 63EN

Page 66

Putting Name on Disc

EDITING DISCS

You can put a name on the disc and change it from this menu.

STANDBY-ON

SOURCE

TIMER SET

DISPLAY OPEN/CLOSE

ABC DEF.@/:

123

JKL MNOGHI

456

PQRS

TUV WXYZ

SPACETIMER CLEAR

TRACKING

VCR DVD

SETUP

SETUPDISC MENU

RETURNTITLE

iji

+--

DVD

Press [STOP C] if you are playing back a disc.

Press [DVD] first.

Press [SETUP].

Use [K / L] to select “Disc Edit”, then

press [OK].

Use [K / L] to select “Edit Disc

Name”, then press [OK].

e.g.) DVD+RW

Disc Edit

Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON

A window for entering a title name will appear.

Edit Disc Name

ABC

No Disc Name

Disc DVD+RW

Total Titles 3

Disc Space Used 0:30:48

Disc Protect OFF

Make Edits Compatible Needed

abc

123

@! ?

REC MODE D.DUBBING

CM SKIP

SEARCH RAPID PLAY

AUDIOREC

NB552

Note

• You cannot select “Disc Edit” when finalized DVD+R or DVD-R is inserted.

0:00:00

To enter a disc name, follow the steps

of “Guide to Edit Title Name” on page

57.

When you finish entering a title name, press

[OK].

Use [K / L] to select “Yes”, then press

[OK].

Edit Disc Name

Yes

No Disc Name

Disc DVD+RW

Total Titles 3

Disc Space Used 0:30:48

Disc Protect OFF

Make Edits Compatible Needed

MY FAVORITE DISC

0:00:00

The name you entered will be activated for the title. Data will be written onto the disc momentarily.

This operation may take a

while to be completed.

64 EN64 EN

Page 67

EDITING DISCS

Setting or Releasing Disc Protect

Introduction

To prevent accidental editing, or erasing the titles, you can protect them.

STANDBY-ON

SOURCE

TIMER SET

DISPLAY OPEN/CLOSE

ABC DEF.@/:

123

JKL MNOGHI

456

PQRS

CM SKIP

TUV WXYZ

SPACETIMER CLEAR

TRACKING

VCR DVD

REC MODE D.DUBBING

SEARCH RAPID PLAY

SETUPDISC MENU

RETURNTITLE

iji

+--

AUDIOREC

Follow steps 1 to 2 in “Putting Name

on Disc” on page 64 to display “Disc

Edit” menu.

Use [K / L] to select “Disc Protect

OFF

ON”, then press [OK].

e.g.) DVD+RW

Disc Edit

Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON

• If the disc is already protected, “Disc Protect ON OFF” will appear instead of “Disc Protect OFF ON”.

Use [K / L] to select “Yes”, then press

[OK].

Disc Edit

Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON

Protect this disc?

Yes

Connections Basic Setup Function Setup VCR Functions

Recording Playback

Editing

NB552

Data will be written onto the disc momentarily.

This operation may take a

while to be completed.

Others Español

65EN 65EN

Page 68

Erasing Disc

EDITING DISCS

You can erase all titles on a disc.

SOURCE

TIMER SET

DISPLAY OPEN/CLOSE

ABC DEF.@/:

123

JKL MNOGHI

456

PQRS

CM SKIP

TUV WXYZ

SPACETIMER CLEAR

TRACKING

VCR DVD

REC MODE D.DUBBING

SEARCH RAPID PLAY

STANDBY-ON

SETUPDISC MENU

RETURNTITLE

iji

+--

AUDIOREC

Press [STOP C] if you are playing back a disc.

Follow steps 1 to 2 in “Putting Name

on Disc” on page 64 to display “Disc

Edit” menu.

Use [K / L] to select “Erase Disc”,

then press [OK].

e.g.) DVD+RW

Disc Edit

Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON

Use [K / L] to select “Yes”, then press

[OK].

Disc Edit

Edit Disc Name Erase Disc Make Edits Compatible

When you press “Yes”, all the

Disc Protect OFF ON

contents in the disc will be erased.

Are you sure to erase the disc?

Yes

Data will be written onto the disc momentarily.

NB552

Note

• When you select “Yes” at step 3, all contents of the disc will be erased.

66 EN66 EN

This operation may take a

while to be completed.

Page 69

Making Edits Compatible

EDITING DISCS

Introduction

If you have added or deleted chapters, or made chapters hidden, you must perform “Make Edits Compatible” to see those effects on other unit.

STANDBY-ON

SOURCE

TIMER SET

DISPLAY OPEN/CLOSE

ABC DEF.@/:

123

JKL MNOGHI

456

PQRS

TUV WXYZ

SPACETIMER CLEAR

TRACKING

VCR DVD

SETUPDISC MENU

RETURNTITLE

iji

+--

Press [STOP C] if you are playing back a disc.

Follow steps 1 to 2 in “Putting Name

on Disc” on page 64 to display “Disc

Edit” menu.

Use [K / L] to select “Make Edits

Compatible”, then press [OK].

Disc Edit

Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON

Use [K / L] to select “Yes”, then press

[OK].

Disc Edit

Edit Disc Name Erase Disc Make Edits Compatible

Activate the Make Edits Compatible?

Disc Protect OFF ON

Yes

Connections Basic Setup Function Setup VCR Functions

Recording Playback

Editing

REC MODE D.DUBBING

CM SKIP

SEARCH RAPID PLAY

NB552

AUDIOREC

Data will be written onto the disc momentarily.

This operation may take a

while to be completed.

Others Español

67EN 67EN

Page 70

LIST OF SETTINGS

The following table is the contents which you can set and the default setting. Refer to the following table for useful operation.

• Your change to each settings stays on even when the power is off.

• An item which is not currently available is grayed in the settings.

Setup Items (highlight is the default) Contents

Playback

Pages 69-72

General Setting

Display

Page 73

Video

Pages 74-75

Recording Auto Chapter

General Setting

Clock

Page 20

Reset All Page 76 Yes

Parental Lock

Disc Audio Dynamic Range

Disc Menu Language

Audio Language

Subtitle Language

Angle Icon

Still Mode

OSD Language

Screen Saver OFF

Progressive Scan ON

TV Aspect

Video Input

Page 13

Page 22

Auto Finalize

Page 37

Dubbing Mode Pages 38-39

Make Recording Compatible

Page 22

Clock Setting Set the clock.

Control

PCM

Dolby Digital PCM

E1(Rear)

E2(Front)

Disc Full ON

End of Timer Rec ON

OFF

level 8 [Adult] to 1 [Kid Safe]

OFF

48kHz

96kHz

Stream

English

French Spanish Other

Original

English French Spanish Other

OFF

English French Spanish Other

OFF

Auto

Field Frame

English

Français Español

5minutes

10minutes

15minutes 30miniutes

OFF

4:3 Letter Box 4:3 Pan & Scan 16:9 Wide

Video In S-Video In

Video In S-Video In OFF

5 minutes

10 minutes 15 minutes

30 minutes 60 minutes

OFF

VCR DVD

VCR

DVD ON

OFF

Set the parental level for DVD playback.

Compressing the range of sound volume.

Set whether the sound recorded in 96kHz will be down sampled in 48kHz.

Set the type of sound signal which outputs from the digital audio output jack.

Set the language for disc menu language.

Set the language for audio.

Set the language for subtitles.

Set whether or not to display the angle icon.

Set the type of still image in pausing playback.

Set the language for OSD (on-screen display).

Set the idling time before the screen saver starts.

Set to the progressive scan mode (set to "ON") or to the interlace scan mode(set to "OFF").

Set a picture size according to aspect ratio of your TV.

Set the video input type for the external input.

Insert chapter marks at even time interval.

Set the unit to finalize the disc automatically.

Set the VCR to DVD (DVD to VCR) duplication.

Set to prohibiting additional recording (OFF) or to replace the title list after recording (ON).

Set to the default setting.

68 EN68 EN

Page 71

Playback

Introduction

SETUPS

STANDBY-ON

TIMER SET

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACE

SPACETIMER CLEAR

TRACKING

VCR DVD

REC MODE D.DUBBING

SEARCH RAPID PLAY

DISPLAY OPEN/CLOSE

OPEN/CLOSE

CLEAR

SETUP

SETUPDISC MENU

RETURNTITLE

iji

+--

AUDIOREC

SOURCE

123

456

PQRS

7809

CM SKIP

Press [STOP C] if you are playing back a disc.

Press [SETUP] and use [K / L] to

select “General Setting”, then press

[OK].

“General Setting” menu will appear.

Use [K / L] to select “Playback”, then

press [OK].

General Setting

Playback Display Video Recording Clock Reset All

Use [K / L] to select a desired item,

then press [OK].

Parental Lock

Disc Audio

Disc Menu Language

Audio Language

Subtitle Language

Angle Icon

Still Mode

Submenu will appear.

Connections Basic Setup

Recording Playback Editing

NB552

Refer to 1 to 7 on pages 70-72 and

set the selected item.

When you finish with setting, press

[SETUP] to exit.

Function Setup

VCR Functions

Others Español

69EN 69EN

Page 72

Playback (cont’d)

SETUPS

Parental Lock (Default: OFF)

Some DVD-video feature a parental lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback. This feature prevents your children from viewing inappropriate material.

Use [K / L] to select the desired level, then press [OK].

General Setting

Parental Lock

Playback Display Video Recording Clock Reset All

Parental Lock

OFF

Audio Out

8 [Adult]

Disc Menu Language

7 [NC 17]

Audio Language

6 [R]

Subtitle Language

5 [PG R]

Angle Icon

4 [PG 13]

Still Mode

3 [PG] 2 [G] 1 [Kid Safe]

If a password has not been set yet, proceed to A. If a password has been set already, proceed to B.

Note

• Parental lock function may not be available to some discs.

• With some DVD, it may be difficult to find if they are compatible with parental lock. Be sure to check if the parental lock function operates in the way that you have set.

• Record the password in case you forget it.

• If there is a DVD in the unit when you set up the parental lock, press [OPEN/CLOSE A] to activate the parental lock level.

A password has not been set yet.

Use [K / L] to select “Yes”. Use [the Number buttons] to enter a new password except for 4737, then press [OK].

General Setting

Playback Display Video Recording Clock Reset All

Parental Lock

OFF

Audio Out

8 [Adult]

Change Password?

Disc Menu Language

7 [NC 17]

Audio Language

Yes

6 [R]

Subtitle Language

5 [PG R]

Angle Icon

4 [PG 13]

Still Mode

3 [PG] 2 [G] 1 [Kid Safe]

Yes

General Setting

Playback Display Video Recording Clock Reset All

Parental Lock

OFF

Audio Out

8 [Adult]

Change Password?

Disc Menu Language

7 [NC 17]

Password Input

Audio Language

Yes

6 [R]

Subtitle Language

5 [PG R]

Angle Icon

4 [PG 13]

Still Mode

3 [PG] 2 [G] 1 [Kid Safe]

Your setting will be activated.

A password has been set already.

• Use [the Number buttons] to enter the current password.

General Setting

Parental Lock

Playback Display Video Recording Clock Reset All

Parental Lock

OFF

Audio Out

8 [Adult]

Disc Menu Language

7 [NC 17]

Password Input

Audio Language

6 [R]

Subtitle Language

5 [PG R]

Angle Icon

4 [PG 13]

Still Mode

3 [PG] 2 [G] 1 [Kid Safe]

Your setting will be activated.

• If you want to change password, use [K / L] to select “Yes”. Use [the Number buttons] to enter a new password, then press [OK].

Yes

General Setting

Playback Display Video Recording Clock Reset All

Parental Lock

OFF

Audio Out

8 [Adult]

Change Password?

Disc Menu Language

7 [NC 17]

Password Input

Audio Language

Yes

6 [R]

Subtitle Language

5 [PG R]

Angle Icon

4 [PG 13]

Still Mode

3 [PG] 2 [G] 1 [Kid Safe]

General Setting

Playback Display Video Recording Clock Reset All

Parental Lock

OFF

Audio Out

8 [Adult]

Change Password?

Disc Menu Language

7 [NC 17]

Audio Language

Yes

6 [R]

Subtitle Language

5 [PG R]

Angle Icon

4 [PG 13]

Still Mode

3 [PG] 2 [G] 1 [Kid Safe]

70 EN70 EN

Your setting will be activated.

Note

• Press [CLEAR] to erase numbers entered incorrectly.

• When you forget the password or you want to clear all settings in “Parental Lock” menu, enter 4,7,3,7 using [the Number buttons] in password input window. Password will be cleared and parental levels will be set to “OFF”.

Page 73

Playback (cont’d)

SETUPS

Introduction

Disc Audio

Choose the appropriate audio setting for your external device.

Use [K / L] to select a setting, then press [OK].

It will only affect a disc playback.

Use [K / L] to select a desired item, then press

General Setting

Playback Display Video Recording Clock Reset All

Parental Lock Audio Out

Disc Audio

Disc Menu Language

Dynamic Range Control

Audio Language

PCM

Subtitle Language

Dolby Digital

Angle Icon

Still Mode

[OK]

Your setting will be activated. PCM : Converts the Dolby Digital into PCM (2 channel).

Dynamic Range Control (Default : ON)

Stream : Outputs Dolby Digital signals

Set to “ON” to compress the range between soft and loud sounds.

Use [K / L] to select a setting, then press [OK].

General Setting

Playback Display Video Recording Clock Reset All

Parental Lock Audio Out

Disc Audio

Disc Menu Language

Dynamic Range Control

Audio Language

PCM

Subtitle Language

OFF

Dolby Digital

Angle Icon Still Mode

Your setting will be activated.

Dolby Digital (Default : Stream)

General Setting

Playback Display Video Recording Clock Reset All

Parental Lock Audio Out

Disc Audio

Disc Menu Language

Dolby Digital

Dynamic Range Control

Audio Language

PCM

Subtitle Language

Stream

Dolby Digital

Angle Icon Still Mode

When your amplifier/decoder is NOT compatible with Dolby Digital, set to “PCM”.

When your amplifier/decoder is compatible with Dolby Digital, set to “Stream”.

Connections Basic Setup

Recording Playback Editing

Note

• Dynamic range control function is available only on the discs which are recorded in the Dolby Digital format.

PCM (Default : 48kHz)

Use [K / L] to select a setting, then press [OK].

General Setting

Playback Display Video Recording Clock Reset All

Parental Lock Audio Out

Disc Audio

Disc Menu Language

PCM

Dynamic Range Control

Audio Language

48kHz

PCM

Subtitle Language

96kHz

Dolby Digital

Angle Icon Still Mode

Your setting will be activated. 48kHz : If your amplifier/decoder is NOT compatible

with 96kHz PCM, select “48kHz”. 96kHz sound will be output in 48kHz.

96kHz : If your amplifier/decoder is compatible with

96kHz PCM, select “96kHz”. 96kHz sound will be output.

Note

When playing back disc with copyright protection

• Even if you select “96kHz”, the sound will be down sampled at 48kHz.

Function Setup

VCR Functions

Others Español

71EN 71EN

Page 74

Playback (cont’d)

Disc Menu Language (Default : English)

Set the language for disc menu.

Use [K / L] to select a setting, then press [OK].

General Setting

Playback Display Video Recording Clock Reset All

Your setting will be activated.

Audio Language (Default : Original)

Set the audio language.

Use [K / L] to select a setting, then press [OK].

General Setting

Playback Display Video Recording Clock Reset All

Parental Lock Audio Out

Disc Menu Language

English

Audio Language

French

Subtitle Language

Spanish

Angle Icon

Other

Still Mode

Parental Lock Audio Out

Audio Language

Disc Menu Language

Original

Audio Language

English

Subtitle Language

French

Angle Icon

Spanish

Still Mode

Other

SETUPS

Note

• Only the languages supported by the disc can be selected.

• Audio language setting may not be available to some discs.

• You can change or switch off the subtitles on a DVD also from the disc menu if it is available.

• Press [CLEAR] or [s] to erase numbers entered incorrectly.

Set to “ON” to show the angle icon during the playback.

Use [K / L] to select a setting, then press [OK].

Your setting will be activated.

Angle Icon (Default : ON)

General Setting

Playback Display Video Recording Clock Reset All

Angle Icon

ON OFF

Parental Lock Disc Audio Disc Menu Language Audio Language Subtitle Language Angle Icon Still Mode

Your setting will be activated.

• When “Original” is selected, the audio language will be in the disc’s default language.

Subtitle Language (Default : OFF)

Set the subtitle language.

Use [K / L] to select a setting, then press [OK].

General Setting

Playback Display Video Recording Clock Reset All

Parental Lock Audio Out

Subtitle Language

Disc Menu Language

OFF

Audio Language

English

Subtitle Language

French

Angle Icon

Spanish

Still Mode

Other

Your setting will be activated.

If “Other” is selected for

to 5, press 4-digit code

using [the Number buttons].

Code Input

----

• When you finish entering the code, press [OK]. Refer to the language code table on page 85.

Still Mode (Default : Auto)

Select “Auto” usually.

Use [K / L] to select a setting, then press [OK].

General Setting

Playback Display Video Recording Clock Reset All

Still Mode

Auto Field Frame

Parental Lock Audio Out Disc Menu Language Audio Language Subtitle Language Angle Icon Still Mode

Your setting will be activated. Auto : Optimum resolution setting (“Field” or

“Frame”) will be selected.

Field : Images in the still mode will be stabilized. Frame : Images in the still mode will be highly defined.

Note

•

Frame is 1 completed video image made up of 2 fields (There are 30 frames per second of NTSC video).

72 EN72 EN

Page 75

Display

SETUPS

Introduction

STANDBY-ON

SOURCE

TIMER SET

DISPLAY OPEN/CLOSE

ABC DEF.@/:

123

JKL MNOGHI

456

PQRS

CM SKIP

TUV WXYZ

SPACETIMER CLEAR

TRACKING

VCR DVD

REC MODE D.DUBBING

SEARCH RAPID PLAY

NB552

SETUP

SETUPDISC MENU

RETURNTITLE

iji

+--

AUDIOREC

Press [STOP C] if you are playing back a disc.

Press [SETUP] and use [K / L] to

select “General Setting”, then press

[OK].

Use [K / L] to select “Display”, then

press [OK].

Use [K / L] to select a desired item,

then press [OK].

OSD Language

Screen Saver

Selection menu will appear.

Refer to 1 to 2 on this page and set

the selected item.

When you finish with setting, press

[SETUP] to exit.

OSD Language (Default : English)

Set the language for the on-screen display.

Use [K / L] to select a setting, then press [OK].

General Setting

Playback Display Video Recording Clock Reset All

OSD Language

English Français Español

OSD Language Screen Saver

Connections Basic Setup

Recording Playback Editing

Function Setup

Your setting will be activated.

Screen Saver (Default : 10 minutes)

Set the time to activate the screen saver function on the TV screen.

Use [K / L] to select a setting, then press [OK].

General Setting

Playback Display Video Recording Clock Reset All

Screen Saver

OFF

5 minutes 10 minutes 15 minutes 30 minutes

OSD Language Screen Saver

Your setting will be activated.

VCR Functions

Others Español

73EN 73EN

Page 76

Video

STANDBY-ON

SOURCE

TIMER SET

DISPLAY OPEN/CLOSE

ABC DEF.@/:

123

JKL MNOGHI

456

PQRS

CM SKIP

TUV WXYZ

SPACETIMER CLEAR

TRACKING

VCR DVD

REC MODE D.DUBBING

SEARCH RAPID PLAY

SETUP

SETUPDISC MENU

RETURNTITLE

iji

+--

AUDIOREC

SETUPS

Press [STOP C] if you are playing back a disc.

1 2

4 5

Press [SETUP] and use [K / L] to

select “General Setting”, then press [OK].

Use [K / L] to select “Video”, then

press [OK].

Use [K / L] to select a desired item,

then press [OK].

Progressive Scan

1 2

TV Aspect

Video Input

Submenu will appear.

Refer to 1 to 2 on page 75 and set

the selected item.

• For 3 refer to page 13.

When you finish with setting, press

[SETUP] to exit.

74 EN74 EN

NB552

Page 77

Video (cont’d)

SETUPS

Introduction

Progressive Scan (Default : OFF)

This unit is compatible with the progressive scan system. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set progressive scan mode to “ON”.

1) Use [K / L] to select “ON“, then press [OK].

General Setting

Playback Display Video Recording Clock Reset All

Progressive Scan TV Aspect

Progressive Scan

Video Input

ON OFF

2) Use [{ / B] to select “Yes“, then press [OK].

General Setting

Playback

Activating progressive scan:

Display

Check your TV has progressive scan

Video

and connect with component video cable.

Recording Clock Reset All

NOTE :

If there is no picture or picture is distorted after selecting “Yes”, Wait about 15 seconds for auto recovery.

Activate? Yes No

Progressive Scan TV Aspect

Progressive Scan

Select Video

ON OFF

3) Use [K / L] to select “Yes“ within 15 seconds, then press [OK].

Your setting will be activated.

Note

• If your TV is compatible with progressive scan (525p / 480p), you are recommended to use the component video cable (commercially available) to connect this unit to the TV. (Refer to “Method 2” on page 14.) If not, use the RCA video cable and set the progressive scan to “OFF” or press and hold [SETUP] for more than 3 seconds during DVD playback.

• When selecting “No” or not pressing any buttons on the unit or remote control within 15 seconds at step 3, progressive scan remains to be “OFF” (interlace scan).

TV Aspect (Default: 4:3 Letter Box)

You should select the TV aspect ratio to match the TV that you are connecting to the unit. You either have a standard 4:3 TV or a widescreen TV (16:9 rectangular).

Use [K / L] to select your desired option, then press [OK].

General Setting

Playback Display Video Recording Clock Reset All

TV Aspect

4:3 Letter Box 4:3 Pan & Scan 16:9 Wide

Progressive Scan TV Aspect Video Input

If you have a standard TV:

Select “4:3 Letter Box” or “4:3 Pan and Scan”. The “4:3 Letter Box” setting will display the entire widescreen DVDs on your standard TV, by placing black bars at the top and bottom of the picture, like a normal DVD player does. The “4:3 Pan and Scan” setting will fill the screen vertically, but both sides of the widescreen DVDs will be trimmed. Standard video input and standard DVDs will appear normal with either setting.

If you have a widescreen TV:

Select the “16:9 Wide” setting. Widescreen DVDs will fill the screen appropriately. To watch standard 4:3 video, use your TV’s aspect control to set the screen to your liking.

Connections Basic Setup

Recording Playback Editing

Function Setup

VCR Functions

Others Español

75EN 75EN

Page 78

Reset All

SETUPS

Reset the setting to default.

SOURCE

TIMER SET

123

456

PQRS

VCR DVD

REC MODE D.DUBBING

CM SKIP

SEARCH RAPID PLAY

STANDBY-ON

DISPLAY OPEN/CLOSE

ABC DEF.@/:

JKL MNOGHI

TUV WXYZ

SPACETIMER CLEAR

TRACKING

+--

SETUP

SETUPDISC MENU

RETURNTITLE

iji

AUDIOREC

Press [SETUP] and use [K / L] to

select “General Setting”, then press

[OK].

“General Setting” menu will appear.

Use [K / L] to select “Reset All”, then

press [OK].

Select “Yes” using [K / L] , then press

[OK].

General Setting

Playback Display Video Recording Clock Reset All

Reset to factory default?

Yes

Select “Yes” again using [K / L] ,

then press [OK].

General Setting

Playback Display Video Recording Clock Reset All

Reset to factory defauit?

Are you sure?

Yes

NB552

Note

• The settings listed below will remain unchanged even after resetting to the factory default.

– OSD language setting – Clock setting – Parental lock setting – Timer programming information

76 EN76 EN

Your setting in recording will be initialized.

Page 79

VCR FUNCTIONS

Playback Recording

Introduction

1) Press [STANDBY-ON y] on the remote control or the front panel of the unit.

When you are playing back a cassette tape, turn the TV on and be sure to select the input to which the unit is connected.

Press [VCR].

2) Insert a prerecorded cassette tape. Press [PLAY B] to begin playback.

3) During playback, press [PAUSE F].

Playback will pause and sound will be muted.

4) Press [PLAY B] to resume playback.

5) Press [STOP C] to stop playback.

6) Press [STOP C / EJECT A] on the front panel of the unit to eject the cassette tape.

Note

• When a cassette tape without erase-protection tab is inserted, the unit will start playback automatically.

• Tracking will be automatically adjusted upon playback. To adjust the tracking manually, press

[TRACKING

/ ].

Press [VCR] first.

Before recording, make sure:

• The appropriate external input position (E1/E2) to which your external tuner is connected is selected by pressing [SOURCE].

• There is a cassette tape with a erase-protection tab in the unit.

• The desired recording mode is selected in SP (standard playback) or SLP (super long playback) mode by pressing [REC MODE].

Recording mode:

Tape speed Recording / playback time

Type of tape T60 T120 T160

SP mode 1hour 2hours 2-2/3hours

SLP mode 3hours 6hours 8hours

• Refer to pages 25-28 for instructions on timer recording.

1) Press [REC I] to begin the recording.

To temporarily stop recording or to resume it, press [PAUSE F]. After the unit has been in pause mode for 5 minutes, it will stop automatically to protect the cassette tape and the video head from damage.

2) Press [STOP C] when the recording is completed.

Accidental erasure prevention

To prevent accidental recording on a recorded cassette tape, remove its eraseprotection tab. To record on it later, cover the hole with cellophane tape.

erase-protection tab

Connections Basic Setup Function Setup

Recording Playback Editing

VCR Functions

Others Español

77EN

Page 80

VCR FUNCTIONS

One-touch Timer Recording (OTR) Index Search

This feature allows you to set the recording length simply by pressing [REC I] on the remote control.

Press [VCR] first.

1) During normal recording, press [REC I] to begin the one-touch timer recording.

You can select a fixed recording time by pressing [REC I] repeatedly.

(Normal recording)

(0:30) (1:00)

(7:30)(8:00)

When the one-touch timer recording is finished, the unit will turn off automatically.

To change the recording length during the one-touch timer recording, press [REC I] repeatedly until the desired length appear.

To cancel the one-touch timer recording within the specified time, press [STOP C].

Note

• To see the remaining recording time on the TV screen during the one-touch timer recording, press

[DISPLAY].

• You cannot pause the one-touch timer recording.

• If VCR the one-touch timer recording is completed during DVD playback or recording, the VCR will be in stop mode and the DVD keeps the current mode.

• Unlike a timer recording, you can perform the following operations during the one-touch timer recording.

- Turning off the power to stop one-touch timer

recording.

- Using [REC I] or [STOP C].

• When the one-touch timer recording is finished and the power is turned off, the unit will switch to the standby mode automatically if a timer recording has been programmed. Press [TIMER SET] to cancel the standby mode for using the unit continuously.

An index mark will be assigned at the beginning of each recording you make. You may skip to a specific marked point by following the steps below.

Press [VCR] first.

1) Press [SEARCH] so that “INDEX SEARCH” menu appears.

2) Using [the Number buttons], enter the number of recordings you wish to skip within 30 seconds.

INDEX SEARCH 03

3) Press [E], [D] to start index search.

If you want to go in the forward direction, press [ D]. If you want to go in the reverse direction, press [E]. After index search, the VCR will play back the cassette

tape automatically.

CURRENT PROGRAM

Beginning of tape

Pro.1 Pro.2 Pro.3 Pro.4 Pro.5

02 01 01 02 03

INDEX MARK

End of tape

Note

• You can make the index mark up to 20.

78 EN

Page 81

VCR FUNCTIONS

Time Search Other Operations

Introduction

This feature allows you to go to a specific point on a cassette tape by entering the exact amount of time you wish to skip in order to reach the point.

Press [VCR] first.

1) Press [SEARCH] repeatedly so that “TIME SEARCH” menu appears.

2) Using [the Number buttons], enter your desired time to skip within 30 seconds.

You can set the time up to 9:59.

TIME SEARCH 2:50

3) Press [E], [D] to start time search.

If you want to go in the forward direction, press [D]. If you want to go in the reverse direction, press [E]. After time search, the unit will play back the cassette

tape automatically.

Note

• Index search and time search are not available during recording.

• Press [STOP C] to stop the search.

• If the end of the cassette tape is reached during search, this unit will cancel the search and rewind the cassette tape.

Press [VCR] first.

Fast forward:

When the unit is in stop mode, press [D] to fast forward the cassette tape.

Rewind:

When the unit is in stop mode, press [E] to rewind the cassette tape.

To cue or review picture during playback (picture search):

Press [E], [D] during playback. Press it again and the unit will search in super high

speed. (in the SLP mode only)

To freeze the picture on TV screen during playback (still mode):

Press [PAUSE F]. Each time you press the button, the picture will be forwarded by one frame.

If the picture begins to vibrate vertically during the still mode, stabilize the picture by pressing [TRACKING

/ ]

on remote control. If the picture is distorted or rolling vertically, adjust the

vertical hold control on your TV, if equipped.

Counter reset: Press [CLEAR] to reset the counter to “0:00:00”.

To playback in slow motion:

Press [PAUSE F] during playback, then press [D]. Press [D] or [E] repeatedly to select the desired

speed.

Automatic rewind:

When a cassette tape is played back or fast forwarded to its end, the cassette tape will rewind to the beginning, stop and eject itself.

When you playback a cassette tape recorded in Hi-Fi stereo:

Press [AUDIO] on the remote control to select Hi-Fi or MONO for playback sound mode.

• If you have connected a stereo TV to this unit, select “HIFI”.

• If you have connected a monaural TV to this unit, select “MONO”.

Monaural

Main audio

program

HIFI

R-channelL-channel

Monaural

Main audio

program

Second audio

program

MONO

Monaural

L+R

Main audio

program

Second audio

program

Your Selection

Type of recorded tape

non Hi-Fi tapes

Hi-Fi tapes

recorded in

Hi-Fi stereo

Hi-Fi tapes

recorded main

audio program

Hi-Fi tapes

recorded second

audio program

Second audio

Connections Basic Setup Function Setup

Recording Playback Editing

VCR Functions

Others Español

Note

• Still/slow mode will stop after 5 minutes to prevent damage to the cassette tape and the video head.

• To return to playback from the picture search/still/ slow mode, press [PLAY B].

79EN

Page 82

TROUBLESHOOTING

Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.

Symptom Remedy

The power does not turn on. • Check that the AC power cord is connected securely.

• Check the breaker (in case of power failure).

• Press [TIMER SET] to cancel the timer standby mode.

There is no picture. • Re-connect the connecting cords securely.

• Check if the connecting cords are damaged.

• Check the connection to your TV (page 14).

• Switch the input selector on your TV (such as to “E1”) so that the signal from the unit appears on the TV screen.

Cannot record a TV program. • This unit does not have a tuner to receive TV broadcasting.

• You must connect this unit to an external tuner to record TV programs (page 12).

TV program pictures are distorted. • Check if all the connections are made correctly. Playback picture is distorted. • Keep the device which may cause electrical disturbances, such as a

There is no sound. • Re-connect all connections securely.

Nothing was recorded even though

•

you set the timer setting correctly.

V C R

Timer recording is not complete or did not start from the beginning.

Timer recording is impossible. • Make sure TIMER REC indicator lights up on the front panel of this unit.

The remote control does not function. • Batteries are weak.

The unit does not operate properly. • When static electricity, etc., causes the unit to operate abnormally,

cellular phone, away.

• Check if the connecting cord is damaged.

• Check the connections to the amplifier input.

• Check if the input device setting on the amplifier is correct.

• When the unit is in pause mode or in slow-motion playback mode, sound is not output. This is not a malfunction.

• When the unit is in fast forward or fast reverse mode, sound is not output. This is not a malfunction.

• There was a power failure during recording.

• The unit’s internal clock stopped due to a power failure that lasted for more than 30 seconds. Reset the clock (page 20).

• The program contains copy protection signals that restricts copying.

• The timer setting overlapped with another setting that has priority.

• The timer setting overlapped with another setting that has priority (page 28).

• Disc space was not enough.

If not, press [TIMER SET].

• There are obstacles between the remote control and the unit.

• The remote control is far from the unit.

• There are no batteries in the remote control.

• Check if the unit is turned on.

• Check if you are pointing the remote control at the recorder and NOT the TV. If you have a plasma TV, it may interfere with the IR signal. Try the remote with the plasma off. If the remote works, you may need to move the unit away from the plasma TV.

• Press [DVD] or [VCR], whichever you need. Then, try again.

• Press [TIMER SET] to cancel the timer standby mode.

unplug the unit and then plug it in again.

80 EN80 EN

Page 83

TROUBLESHOOTING

Symptom Remedy

There is no picture. • If the main menu appears on the TV screen, press [RETURN] to exit.

• Check if the progressive scan mode is set correctly according to your TV (page 75).

Picture noise appears. • Clean the disc with a cleaning cloth. Playback picture from the external

devices connected to this unit is distorted.

There is no sound. • If you are using DIGITAL AUDIO OUTPUT (COAXIAL) jack, check the setting

Sound is noisy. • Clean the disc with a cleaning cloth. No DTS sound is output. • This unit is not compatible with DTS sound. The disc does not play back. • No disc is inserted.

Discs recorded on this unit cannot be

played back on other DVD players.

The disc does not start playback from the beginning.

The unit starts playing back the disc automatically.

Some functions such as stop, search, or slow-motion playback cannot be performed.

The language for the sound track cannot be changed.

The subtitle language cannot be changed or turned off.

The angles cannot be changed. • Multi-angles are not recorded on the DVD-video being played back.

Recording does not stop immediately after you press [STOP C].

The disc tray does not open when you press [OPEN/CLOSE A].

• If the picture output signal from the external devices passes through this unit to get to your TV, the copy protection signal applied to some DVD could affect the picture quality. Disconnect the playback device in question and connect it directly to your TV.

in “Disc Audio” (page 71).

• Clean the disc with a cleaning cloth.

• A blank disc is inserted.

• The disc is upside down. Insert the disc with the labeled side facing up.

• The disc is not correctly inserted.

• The unit cannot play back certain discs (such as a CD-ROM) (page 40).

• The region code on the DVD-video does not match the unit (page 40).

• Moisture has condensed inside the unit. Remove the disc and leave the unit turned on for about 2 hours until the moisture evaporates (page 4).

• If the disc was recorded on another recorder, the unit cannot play back the disc if it was not finalized.

• If you are using DVD+R, DVD-RW/-R disc, please ensure you finalized the disc after recording (page 36).

• Resume playback was activated (page 46). Press [STOP C] twice.

• You have inserted a disc whose title menu or DVD menu automatically appears on the TV screen when it is first insert.

• The DVD-video features an auto playback function.

• Depending on the disc, you may not be able to do some of the operations. Refer to the manual supplied with the disc.

• The title does not have the multilingual audio tracks.

• The DVD-video prohibits the changing of the language for the sound track.

• Multilingual subtitle are not recorded on the DVD-video.

• The angle-change operation is whenever possible as long as the disc contains a multi-angle portion. Actual change will be performed when the portion has come up.

• The DVD-video prohibits changing angles.

• Try changing the angle using the DVD-video’s menu.

• It may take a few seconds for the unit to input disc data before recording stops.

• It may take a few seconds for the disc tray to open after you have recorded or edited a disc. This is because the unit is adding disc data to the disc.

Introduction

Connections Basic Setup Function Setup VCR Functions

Recording Playback Editing

Others

Español

81EN 81EN

Page 84

TROUBLESHOOTING

Symptom Remedy

“Repairing” appears on the TV screen.

Repairing

In a case you intend to cancel the

repairing process.

Do you want to cancel a repairing process ?

When selecting “Yes”, the disc may not be usable.

Repairing

Yes

• If there is a power failure or unplugging during recording, finalizing, formatting or editing (even after “Repairing” disappears), a repairing process will begin automatically just after turning the unit on again.

It may take several minutes up to about several hours.

• If you intend to cancel the repairing process, press [OPEN/CLOSE A] on the front panel, then select “Yes” and press [OK]. After that, press

[OPEN/CLOSE A] to take out the disc. The disc canceled during the repairing process MAY NOT work.

Picture noise appears. • Head cleaning for VCR may be necessary. Refer to “Auto head cleaning”

(page 5).

• Adjust tracking control for better picture by pressing [TRACKING

The cassette tape does not play back. • No cassette tape is inserted.

Recording does not start after you

press [REC I].

while you are playing back a cassette tape.

• Make sure the cassette tape has a erase-protection tab when you record to a cassette tape. If needed, cover the hole with cellophane tape.

The remote control does not function. • Check if a cassette tape is in this unit. The motor rotates even when

playback / recording is stopped.

• The motor may rotate for the duration of approximately 5 minutes for efficient operation. This is not a malfunction.

/ ]

82 EN82 EN

Page 85

TROUBLESHOOTING

Error message Cause Solution

Disc Error — Please eject the disc. —

Playback feature may not be available on this Disc.

Region Error — Please eject the disc. — Playback is not authorized in your region.

Parental Lock On The current selected parental level prohibits playback.

Recording Error This program is not allowed to be recorded.

Recording Error This program is not recordable in +VR mode.

Recording Error Can not record on this disc.

Recording Error This disc is protected and not recordable.

Recording Error Disc is full. (No area for new recording)

Recording Error You cannot record more than 49 titles on one disc. (The maximum is 49)

Recording Error You cannot record more than 254 chapters on one disc. (The maximum is 254)

Recording Error You cannot record on this disc as Power Calibration Area is full.

Recording Error This disc is already finalized.

Recording Error The disc has no recording compatibility. Set “Make Recording Compatible” to “ON” to convert the disc.

* If you are still having trouble with the unit after checking “TROUBLESHOOTING”, write down the error code and the

error description for calling our help line mentioned on the front page to locate an Authorized Service Center.

• Unplayable disc is inserted in the unit.

• The disc is upside down.

• Playback is not authorized in the region of the DVD-video which you inserted in the unit.

• The current selected parental level prohibits playback.

• The recording function encountered the copy prohibited program.

• You are trying to record the copy-once program.

• You are trying to record onto the disc which is unrecordable, or the disc status is unable to record.

• The disc is dirty.

• The disc is damaged.

• You are trying to record on to the protected disc which is set in “Disc Edit” menu.

• You are trying to record onto the disc which has no space for recording.

• You are trying to record onto the disc on which the number of recording titles comes up to the maximum (49).

• You are trying to record onto the DVD+RW or DVD-RW on which the number of recording chapters comes up to the maximum (254).

• When recordings are performed repeatedly onto an unstable disc, this area may come up to be full.

• Every time you insert a disc for recording, the disc’s working area will be taken up. And if you repeat this frequently, it will be used up sooner and you may not be able to record full 49 titles.

• You are trying to record onto the disc already finalized.

• You are trying to record onto the disc that had been recorded by other recorders.

• Insert the standardized disc which bear the marks on page 40.

• Insert the disc with the labeled side facing up.

• Insert the DVD-video with region codes 1 or ALL.

• Check “Parental Lock” setting in “Playback” menu (page 70).

• You cannot record copy prohibited programs.

• You cannot record the copy-once program.

• Insert the recordable disc, and ensure the disc status satisfies the recording requirements (page 21).

• Clean the disc with a cleaning cloth.

• Replace the disc.

• Release the disc protect setting in “Disc Edit” menu (page 35).

• Insert the recordable disc with enough recording space.

• Delete unnecessary titles (page 56).

• Delete unnecessary chapter marks (pages 59-60).

• Insert a new disc.

• Release the finalizing for this disc (page 36).

• Set “Make Recording Compatible” to “ON” to rewrite the menu, after that you will record to disc (page 22).

Introduction

Connections Basic Setup Function Setup VCR Functions

Recording Playback Editing

Others

Español

83EN 83EN

Page 86

TROUBLESHOOTING

Frequently Asked Questions

– Can I record to CD-RW/-R? No, this unit records only DVD.

– Can I play back DVD-video that is bought in another

country?

– Can I connect the unit to my PC? No, you cannot control the unit by PC.

– Can I program a timer recording with external tuner? Yes, you can. Select “E1” or “E2” as your recording

– Can I record one channel while watching another

channel using an external tuner?

– Can I change the channels on the external tuner using

the remote control of this unit?

Possible when the region code of the disc is 1 and All.

channel, and leave the external tuner on (pages 12, 25-

28).

It depends on your connection configurations. For more details, please kindly contact at your local store.

No. Changing the channels on the external tuner using this unit’s remote control is not possible. You need to use the remote control supplied with the external tuner to change the channels on the external tuner.

84 EN84 EN

Page 87

LANGUAGE CODE

Introduction

Language Code

Abkhazian 4748 Afar 4747 Afrikaans 4752 Albanian 6563 Amharic 4759 Arabic 4764 Armenian 5471 Assamese 4765 Aymara 4771 Azerbaijani 4772 Bashkir 4847 Basque 5167 Bengali;Bangla 4860 Bhutani 5072 Bihari 4854 Bislama 4855 Breton 4864 Bulgarian 4853 Burmese 5971 Byelorussian 4851 Cambodian 5759 Catalan 4947 Chinese 7254 Corsican 4961 Croatian 5464 Czech 4965 Danish 5047 Dutch 6058 English 5160 Esperanto 5161 Estonian 5166 Faroese 5261 Fiji 5256 Finnish 5255 French 5264 Frisian 5271 Galician 5358 Georgian 5747 German 5051 Greek 5158 Greenlandic 5758 Guarani 5360 Gujarati 5367 Hausa 5447 Hebrew 5569 Hindi 5455

Language Code

Hungarian 5467 Icelandic 5565 Indonesian 5560 Interlingua 5547 Interlingue 5551 Inupiak 5557 Irish 5347 Italian 5566 Japanese 5647 Javanese 5669 Kannada 5760 Kashmiri 5765 Kazakh 5757 Kinyarwanda 6469 Kirghiz 5771 Kirundi 6460 Korean 5761 Kurdish 5767 Laothian 5861 Latin 5847 Latvian; Lettish 5868 Lingala 5860 Lithuanian 5866 Macedonian 5957 Malagasy 5953 Malay 5965 Malayalam 5958 Maltese 5966 Maori 5955 Marathi 5964 Moldavian 5961 Mongolian 5960 Nauru 6047 Nepali 6051 Norwegian 6061 Occitan 6149 Oriya 6164 Oromo (Afan) 6159 Panjabi 6247 Pashto; Pushto 6265 Persian 5247 Polish 6258 Portuguese 6266 Quechua 6367 Rhaeto-Romance 6459 Romanian 6461

Language Code

Russian 6467 Samoan 6559 Sangho 6553 Sanskrit 6547 Scots Gaelic 5350 Serbian 6564 Serbo-Croatian 6554 Sesotho 6566 Setswana 6660 Shona 6560 Sindhi 6550 Singhalese 6555 Siswat 6565 Slovak 6557 Slovenian 6558 Somali 6561 Spanish 5165 Sundanese 6567 Swahili 6569 Swedish 6568 Tagalog 6658 Tajik 6653 Tamil 6647 Tatar 6666 Telugu 6651 Thai 6654 Tibetan 4861 Tigrinya 6655 Tonga 6661 Tsonga 6665 Turkish 6664 Turkmen 6657 Twi 6669 Ukrainian 6757 Urdu 6764 Uzbek 6772 Vietnamese 6855 Volapuk 6861 Welsh 4971 Wolof 6961 Xhosa 7054 Yiddish 5655 Yoruba 7161 Zulu 7267

Connections Basic Setup Function Setup VCR Functions

Recording Playback Editing

Others

Español

85EN 85EN

Page 88

GLOSSARY

Analog Audio

An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also “Digital Audio”.

Aspect Ratio

The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the TV screen is almost square); widescreen models are 16:9 (the TV screen is almost twice as wide as it is high).

Chapter

Just as a book is split up into several chapters, a title on a DVD is usually divided into chapters. See also “Title”.

Component Video Output

Each signal of luminance (Y) and component (PB/CB, PR/ C

R) is independent to output so that you can experience

picture color as it is. Also, due to compatibility with progressive video (525p/480p), you can experience higher-density picture than that in interlace (525i/480i).

Digital Audio

An indirect representation of sound by numbers. During recording, the sound is measured at discrete intervals (44,100 times a second for CD audio) by an analogto-digital converter, generating a stream of numbers. On playback, a digital-to-analog converter generates an analog signal based on these numbers. See also “Sampling Frequency” and “Analog Audio”.

Dolby Digital

The system to compress digital sound developed by Dolby Laboratories. It offers you sound of stereo(2ch) or multi channel audio.

Finalize

To make DVD, which have been recorded on, possible to play back in DVD players. With this unit, it is possible to finalize DVD+R, DVD-RW, and DVD-R.

MP3 (MPEG audio layer 3)

MP3 is a method of compressing files. You can copy MP3 files on CD-RW/-R from the computer and play back the files on this unit.

PBC (playback control) (video CD only)

This function enables you to play back interactive software using a menu screen. See also “Video CD”.

PCM (pulse code modulation)

The most common system of encoding digital audio, found on CD and DAT. Excellent quality, but requires a lot of data compared to formats such as Dolby Digital and MPEG audio. For compatibility with digital audio recorders (CD, MD and DAT) and AV amplifiers with digital inputs, this unit can convert Dolby Digital and MPEG audio to PCM. See also “Digital Audio”.

Progressive Scan (525p/480p)

A type of display that does not split each frame into fields, and instead scans directly through all the scanlines of each frame in order. Progressive scan provides less flickering and higher image resolution than traditional (525i/480i) TV signals. Refer to page 75 for instructions on selective progressive scan mode.

Region Code

Regions associate discs and players with particular areas of the world. This unit will only play back discs that have compatible region codes. You can find the region code of your unit by looking on the rear panel. Some discs are compatible with more than one region (or all regions).

Sampling Frequency

The rate which sound is measured by a specified interval to turn into digital audio data. The numbers of sampling in one second defines as sampling frequency. The higher the rate, the better the sound quality.

S-Video Output

It delivers independently each signal of color(C) and luminance(Y) to TV as video signals, so that higher-quality picture will be gained.

Title (DVD only)

A collection of chapters on DVD. See also “Chapter”.

Track

Audio CD use tracks to divide up the content of a disc. The DVD equivalent is called a chapter. See also “Chapter”.

Video CD

A digital format for store video data in compact disc.

86 EN86 EN

Page 89

SPECIFICATIONS

General

System

VCR video heads Four heads Power requirements 120V AC +/-10%, 60Hz +/-5% Power consumption 30W (standby: 3.3W) Dimensions (width x height x depth) 17.2 x 4.0 x 10.3 inches (435 x 99.5 x 260mm) Weight 9.5 lbs. ( 4.3kg ) Operating temperature 41°F (5°C) to 104°F (40°C) Operating humidity Less than 80% (no condensation)

Recording

Recording format +VR (video recording) format

Recording discs

Video recording format

Sampling frequency Compression format

Audio recording format

Sampling frequency Compression format

Terminals

Audio input

RCA jack x 2 2V rms (input impedance: more than 22kΩ)

Video input

RCA jack x 1 1Vp-p (75Ω)

Front

S-video input

Mini DIN 4-pin x 1 Y: 1Vp-p (75Ω) C: 286mVp-p (75Ω)

Audio input

RCA jack x 2 2V rms (input impedance: more than 22kΩ)

Audio output

RCA jack x 4 2V rms (output impedance: more than 1kΩ)

Video input

RCA jack x 1 1Vp-p (75Ω)

Video output

RCA jack x 1 1Vp-p (75Ω)

S-video input

Rear

Mini DIN 4-pin x 1 Y: 1Vp-p (75Ω) C: 286mVp-p (75Ω)

S-video output

Mini DIN 4-pin x 1 Y: 1Vp-p (75Ω) C: 286mVp-p (75Ω)

Component video output

RCA jack x 3 Y: 1Vp-p (75Ω) P

Coaxial digital audio output

RCA jack x 1 500mVp-p (75Ω)

DVD+RW/+R, DVD-RW/-R, DVD-video, CD-DA, Video CD, CD-RW/-R VHS cassette tape

DVD+Rewritable, DVD+Recordable DVD-Rewritable, DVD-Recordable (+VR mode only)

13.5 MHz MPEG

48 kHz Dolby Digital

B/CB: 700mVp-p (75Ω) PR/CR: 700mVp-p (75Ω)

Introduction

Connections Basic Setup Function Setup VCR Functions

Recording Playback Editing

Note

• The specifications and design of this product are subject to change without notice.

Others

Español

87EN 87EN

Page 90

ESPAÑOL

Discos Reproducibles

Este aparato es compatible con la reproducción de los siguientes discos y archivos.

LogotiposDiscos reproducibles

DVD-video

DVD+RW

DVD+R

DVD-RW (Sólo discos en modo de video nalizados)

DVD-R (Sólo discos en modo de video nalizados)

CD-DA (CD de audio)

CD de video

Disco Grabable

Este aparato puede grabar a DVD+RW, DVD+R, DVD-RW y DVD-R. Los discos DVD+R/DVD-R pueden ser grabados sólo una vez. Los discos DVD+RW/DVD-RW pueden ser grabados y borrados muchas veces.

En este aparato los discos DVD-RW/-R serán grabados automáticamente en el modo DVD+VR.

• Los siguientes discos se recomiendan para obtener una buena calidad de grabación y han sido comprobados como compatibles con este aparato. Sin embargo, según sea la condición del medio el equipo podría no leer el disco correctamente.

Verbatim DVD+R 8x, DVD+RW 4x, DVD-R 8x, DVD-RW 2x JVC DVD-RW 4x Maxell DVD+R 4x/8x/16x, DVD-R 8x/16x SONY DVD+R 4x/8x/16x, DVD+RW 4x TDK DVD+R 4x/8x/16x

El comportamiento de cualquier otro disco no está

garantizado.

• Usted puede reproducir discos DVD+RW en la mayoría de los reproductores de DVD sin finalizarlos. Sin embargo, si usted ha añadido o eliminado capítulos, u ocultado capítulos, debe ejecutar “Compatibilizar edic.” antes de poder ver dichos efectos en otros equipos. (Consulte la página 67.) Para reproducir discos que no sean DVD+RW en otros reproductores de DVD, usted necesitará finalizarlos.

CD-RW

CD-R

CD-DA

MP3

es una marca registrada de DVD Format/Logo Licensing Corporation.

Códigos de Región

El número presente en el interior el globo se refiere a una región del mundo.Este aparato puede reproducir discos DVD que estén rotulados para ALL las regiones o para la región 1.

Medio Archivos reproducibles

CD-RW/-R

Logotipo

DVD+RW DVD+R

DVD-RW

DVD-R

Disco de 8 cm / 12 cm, un solo lado, una sola capa Tiempo de grabación máx. aprox. (modo SLP): 360 minutos (4,7 GB) (para 12 cm) 108 minutos (1,4 GB) (para 8 cm)

Atributos

Disco no Grabable

• Un DVD-RW grabado en un modo distinto de +VR no será grabable en este aparato a menos que usted borre todo el contenido del disco. (Consulte la página 66.)

• Un DVD-R grabado en un modo distinto de +VR no será grabable en este aparato.

88 ES

Page 91

ESPAÑOL

Conexión a un Sintonizador Externo

1) Desconecte el cable de alimentación de su televisor del tomacorriente de CA.

2) Efectúe la conexión como se ilustra abajo.

Introduction

ej.)

S-VIDEO IN --- AUDI O --- OUT

DVD/VCR

IN --- VIDEO --- OUT

AUDIO IN

VIDEO IN

cable de audio RCA

DVD

DIGITAL

AUDIO

S-VIDEO

COMPONENT VIDEO OUT

AUDIO OUT

OUT

parte trasera de este aparato

S-VIDEO IN --- AUDIO --- OUT

/CB

PR /CR

DVD/VCR

IN --- VI D EO --- OU T

RLR

cable de video RCA

parte trasera de su televisor

S-VIDEO

OUT

cable de S-video

cable de video RCA

cable de audio RCA

ANT. IN

VIDEO

OUT

cable coaxial de RF

AUDIO OUT

sintonizador externo

cable coaxial

de RF

OUT IN

señal de TV

3) Enchufe los cables de alimentación de los aparatos al tomacorriente de CA.

Selección de un Canal de Entrada Externo en el Televisor

Luego de completar las conexiones, cambie el selector de entrada del televisor a un canal de entrada externo adecuado. Presione un botón que seleccione un canal externo de entrada en el control remoto original del televisor hasta que aparezca la imagen inicial del grabador de DVD. Para obtener detalles consulte el manual del propietario de su televisor.

Connections Basic Setup Function Setup VCR Functions

Recording Playback Editing

Configuración de la Entrada de Video

Antes de efectuar una grabación se debe informar al aparato qué conector hembra de entrada de video se está utilizando.

Presione [SETUP] y utilice [K / L]

para seleccionar “Ajuste general”, y

luego presione [OK].

Utilice [K / L] para seleccionar

“Video”, y luego presione [OK].

Utilice [K / L] para seleccionar el tipo

de conector hembra de entrada a

conectar, y luego presione [OK].

Ajuste general

Reproduc. Pantalla Video Grabación Reloj Rest. todo

Escaneo progresivo Aspecto de TV Entrada de video

E1 (Tras.)

Entrada de video

Entr. de Video

E1 (Tras.)

Entr. Video-S

E2 (Front.)

Utilice [K / L] para seleccionar

“Entrada de video”, y luego presione

[OK].

Utilice [K / L] para seleccionar la

Para salir presione [SETUP].

posición de la entrada externa

deseada, y luego presione [OK].

Ajuste general

Reproduc. Pantalla Video Grabación Reloj Rest. todo

Escaneo progresivo Aspecto de TV Entrada de video

Entrada de video

E1 (Tras.) E2 (Front.)

Others

Español

89ES

Page 92

ESPAÑOL

Configuración Inicial

Cuando usted encienda este aparato por primera vez necesita seguir estos pasos.

Presione [STANDBY-ON yy].

1 2

Encienda el televisor. Seleccione la entrada a la cual está conectado el aparato.

Utilice [K / L] para seleccionar su

idioma deseado, y luego presione [OK] para establecerlo.

Initial Setup

OSD Language

English Français Español

Presione [OK] para activar “Ajste

Manual de Reloj”.

Ajuste inicial

Ajste Manual de Reloj

- - - / - - / - - - - ( - - - )

- - : - - - -

Grabación Básica

Presione [DVD].

Presione [OPEN/CLOSE A] para abrir

la bandeja de discos e insertar su disco con el rótulo aupntando hacia arriba.

* Asegúrese de que el disco

sea compatible con este aparato.(Para obtener la lista de discos compatibles consulte la página 21.)

Para seleccionar un modo de

grabación presione [REC MODE].

SP(2Hr) 0:58

Modo de

grabación

HQ (1Hr)

SP (2Hr)

SPP (2.5Hr)

LP (3Hr) EP (4Hr)

SLP (6Hr)

Presione [SOURCE] para seleccionar

la posición adecuada de la entrada

externa (E1/E2) a la cual está conectado su sintonizador externo. Luego seleccione en el sintonizador externo el canal que desea grabar.

Tiempo de

grabación

Disco de 8 cm Disco de 12 cm

18 min 36 min 45 min 54 min 72 min

108 min

120 min 150 min 180 min 240 min 360 min

Calidad del video

60 min

Deciente

y el sonido

Buena

Utilice [{ / B] para seleccionar un elemento a configurar, y utilice [

para seleccionar el contenido de su preferencia, y luego presione [OK].

90 ES

Ajuste inicial

Ajste Manual de Reloj

ENE / 01 / 2007 ( LUN )

12 : 00 AM

K / L

Presione [REC I] para iniciar la

]

grabación.

Para configurar la grabación a un toque con temporizador (OTR)...

Esta es una manera sencilla de configurar el tiempo de grabación en bloques de 30 minutos. Presione [REC I] repetidamente hasta que aparezca en la pantalla del televisor la longitud deseada de grabación (30 minutos a 6 horas).

Comenzará la grabación a un toque con temporizador.

0:30

(grabación normal)

6:00 5:30

• Para cancelar la grabación a un toque con

temporizador dentro del tiempo especificado, presione [STOP C].

Para de tener la grabación presione

[STOP C].

1:00

Page 93

ESPAÑOL

Grabación con Temporizador

Usted puede programar el equipo para que grabe hasta 12 programas, con un mes de anticipación. También hay disponibles grabaciones de programas diarias o semanales.

Antes de grabar, asegúrese de que

• Cuando llegue el momento en que desea empezar a grabar, conecte el sintonizador externo a ya sea E1 o E2 y configúrelo para dar salida a las señales de audio/video.

• No cambie el canal del sintonizador externo cuando esté grabando. Usted no puede mirar un canal y grabar otro al mismo tiempo.

• Antes de establecer una programación del temporizador configure el reloj.

• Inserte un disco grabable con suficiente espacio libre.

STANDBY-ON

Presione [TIMER].

Utilice [K / L] para seleccionar “Prog.

nuevo”, y luego presione [OK].

Programaci. con Reloj

Fcha Empieza Termina

Prog. nuevo

LUN ENE/01 11:00AM

E1/E2

Configure una programación del

temporizador.

Introduction

Connections Basic Setup Function Setup VCR Functions

Reproducción

TIMER SET

SOURCE

TIMER SET

DISPLAY OPEN/CLOSE

PQRS

TIMER

CM SKIP

ABC DEF.@/:

123

JKL MNOGHI

456

TUV WXYZ

SPACETIMER CLEAR

TRACKING

VCR DVD

REC MODE D.DUBBING

SEARCH RAPID PLAY

NB552

SETUPDISC MENU

RETURNTITLE

iji

+--

AUDIOREC

Presione [OK].

Presione [TIMER SET] para configurar

una programación del temporizador.

El indicador TIMER REC

Configure la fecha.

Fcha

ENE/02

E1/E2

Empieza

GRAB a Modo

- - : - -

DVD

Termina

SP 2 : 00

Configure las horas de inicio y finalización.

Fcha

ENE/02

E1/E2

Empieza

12 : 00AM

GRAB a Modo

Termina

DVD SP

SP 2 : 00

Seleccione la posición adecuada de la entrada externa (E1/E2) a la cual está conectado su sintonizador externo.

Fcha

ENE/02

E1/E2

Empieza

12 : 00AM 1 : 00AM

GRAB a Modo

Termina

DVD SP

SP 1 : 00

Seleccione un medio de grabación (“DVD” o “VCR”).

DVD

Termina

SP 1 : 00

Fcha

ENE/02

E1/E2

Empieza

12 : 00AM 1 : 00AM

GRAB a Modo

Seleccione un modo de grabación.

Fcha

ENE/02

E1/E2

Empieza

12 : 00AM 1 : 00AM

GRAB a Modo

Termina

DVD SP

SP 1 : 00

del panel frontal se iluminará.

- - : - -

Recording Playback Editing

Others

Abra la bandeja

de discos.

OPEN/CLOSE

Inserte un disco.

Comience a

reproducir.

Detenga la

reproducción.

Español

91ES

Page 94

LIMITED WARRANTY

FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows:

DURATION:

PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date

LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of

LIMITS AND EXCLUSIONS:

THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.

This warranty shall not be extended to any other person or transferee. This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing

or if service was attempted by an unauthorized service center. This limited warranty does not apply to any product not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occur during normal use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or products not supplied by FUNAI CORP., or damage, which results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product, or damage which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES.

ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER. THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER. THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO PROOF

OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIR COSTS WILL BE CHARGED.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE.

WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:

To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI CORP. will not reimburse you for any service done by unauthorized service providers without prior written approval.

To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please contact us at:

of original retail purchase. Certain parts are excluded from this warranty.

original retail purchase.

FUNAI CORPORATION

Customer Service

Tel: 1-800-605-8610

http://www.funai-corp.com

19900 Van Ness Avenue, Torrance, CA 90501

Printed in China E9E2ZUD

1VMN24193 ★★★★★

Magnavox BZV420MW8 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual