Magnavox BDP2180 User Manual

Download

Always there to help you

User manual

BDP2180

Question?

Contact

Philips

Before you connect this Blu-ray disc/ DVD player, read and understand all accompanying instructions.

User Manual

Quick start guide

COAXIAL

IAL

( )

HDMI

1 HDMI

HDMI  VIDEO  COAXIAL  AUDIO LINE OUT

COAXIAL

2 COAXIAL

HDMI  VIDEO COAXIAL  AUDIO LINE OUT

SOURCE

USB

DVD/VCD/CD

BD 3D

DivX Plus HD/MKV MP3 / JPEG

7EN

Contents

1 Hookup and play 2-6

2 Use your Blu-ray disc/ DVD player 8

Basic play control 8 Video, audio and picture options 9 DivX videos 10 Play a musical slideshow 10 BonusView on Blu-ray 10 BD-Live on Blu-ray 11 Play a Blu-ray 3D video 11 Set up a network 11 Smartphone control 12 Browse PC through DLNA 13 Use Philips EasyLink 13

3 Change settings 14

Picture 14 Sound 14 Network (installation, status...) 15 Preference

(languages, parental control...) 15

Advanced options

(clear memory...) 15

4 Update software 16

Update software via the Internet 16 Update software via USB 16

5 Specications 17

6 Troubleshooting 19

7 Safety and important notice 21

8 EN

2 Use your Blu-

ray disc/ DVD player

Congratulations on your purchase, and

welcome to Philips! To fully benet from

the support that Philips offers (e.g. product software upgrade), register your product at www.philips.com/welcome.

Basic play control

During play, press the following buttons to control.

Button Action

Turn on the player, or switch to standby.

Access the home menu.

/ Stop play.

Press and hold (more than 4 seconds) to open or close the disc compartment.

Pause play. Press repeatedly to slow forward frame by frame.

Start or resume play.

/ Skip to the previous or next

track, chapter or le.

/ Fast backward or forward.

Press repeatedly to change the search speed. Press once, and then press

to slow forward.

AUDIO Select an audio language or

channel.

SUBTITLE Select a subtitle language. DISC MENU

/ POP-UP MENU

Access or exit the disc menu.

TOP MENU Access the main menu of a

video disc.

Color buttons

Select tasks or options for Blu-ray discs.

Navigate the menus.

Press to rotate a picture clockwise or counter-clockwise during slideshow.

OK Conrm a selection or entry.

Return to a previous display menu.

Access more options during play.

Alphanumeric buttons

Select an item to play. Enter values. Enter letters via SMS style entry.

9EN

Video, audio and picture options

More options are available for video or picture play from a disc or USB storage device.

Video options

Access more options during video play.

• [Audio language]: Select an audio language.

• [Subtitle Language]: Select a subtitle

language.

• [Subtitle shift]: Change the subtitle position on the screen. Press to change the subtitle position.

• [Info]: Display play information.

• [Character set]: Select a character set that

supports the DivX video subtitle (only for DivX videos).

• [Time search]: Skip to a specic time

via the numeric buttons on the remote control.

• [2nd audio language]: Select the second audio language (only for Blu-ray discs that support BonusView).

• [2nd Subtitle Language]: Select the second subtitle language (only for Blu-ray discs that support BonusView).

• [Titles]: Select a title.

• [Chapters]: Select a chapter.

• [Angle list]: Select a camera angle.

• [Menus]: Display a disc menu.

• [PIP selection]: Display a picture-in-picture

window (only for Blu-ray discs that support BonusView).

• [Zoom]: Zoom into a video picture. Press to select a zoom factor.

• [Repeat]: Repeat a chapter or title.

• [Repeat A-B]: Mark two points within a

chapter for repeat play, or turn off repeat mode.

• [Picture settings]: Select a predened

color setting.

Note

• Available video options depend on the video source.

Picture options

Access more options during slideshow.

• [Rotate +90]: Rotate a picture 90 degrees

clockwise.

• [Rotate -90]: Rotate a picture 90 degrees

counter-clockwise.

• [Zoom]: Zoom into a picture. Press to

select a zoom factor.

• [Info]: Display picture information.

• [Duration per slide]: Set a display interval

for a slideshow.

• [Slide Animation]: Select a transition effect

for a slideshow.

• [Picture Settings]: Select a predened

color setting.

• [Repeat]: Repeat a selected folder.

10 EN

Audio options

Press repeatedly to cycle through the following options.

• Repeat the current track.

• Repeat all the tracks on the disc or folder.

• Play audio tracks in a random loop.

• Turn off a repeat mode.

DivX videos

You can play DivX videos from a disc or a USB storage device.

VOD code for DivX

• Before you purchase DivX videos and play them on this player, register this player on www.divx.com using the DivX VOD code.

• Display the DivX VOD code: press , and select [Setup] > [Advanced] > [DivX

VOD Code].

DivX subtitles

• Press SUBTITLE to select a language.

• If the subtitle is not displayed correctly,

change the character set that supports the DivX subtitle. Select a character set: press

, and select [Character Set].

Character set

Languages

[Standard] English, Albanian, Danish, Dutch,

Finnish, French, Gaelic, German, Italian, Kurdish (Latin), Norwegian, Portuguese, Spanish, Swedish, and Turkish

[Central Europe]

Albanian, Croat, Czech, Dutch, English, German, Hungarian, Irish, Polish, Romanian, Slovak, Slovene, and Serbian

Character set

Languages

[Cyrillic] Bulgarian, Belorussian, English,

Macedonian, Moldavian, Russian, Serbian, and Ukrainian

[Greek] Greek [Baltic] Northern Europe

Note

• To play DivX DRM protected les from a USB storage

device, connect this player to a TV through HDMI.

• To use the subtitles, make sure that the subtitle le

has the same name as the DivX video le name. For example, if the DivX video le is named “movie.avi", save the subtitle le as “movie.srt”, or “movie.sub”.

• This player can play subtitle les in the following

formats: .srt, .sub, .txt, .ssa, and .smi.

Play a musical slideshow

Play music and pictures simultaneously to create a musical slideshow.

1 From a disc or connected USB storage

device, play a music le.

2 Press , and go to the picture folder. 3 Select a picture from the same disc or

USB, and press OK to start slideshow.

4 Press to stop slideshow. 5 Press again to stop music play.

BonusView on Blu-ray

View special content (such as commentaries) in a small screen window. This feature is only applicable to Blu-ray discs compatible with BonusView (also known as picture in picture).

1 During play, press .

» The options menu is displayed.

11EN

2 Select [PIP Selection] > [PIP], and press

OK.

» PIP options [1]/[2] depend on the

video contents.

» The secondary video window is

displayed.

3 Select [2nd Audio Language] or [2nd

Subtitle Language], and press OK.

BD-Live on Blu-ray

Access exclusive online services, such as movie trailers, games, ringtones and other bonus contents. This feature is only applicable to Blu-ray discs that are BD-Live enabled.

1 Prepare the Internet connection and set

up a network (see “Set up a network”).

2 Connect a USB storage device to this

player.

• A USB storage device is used to store

the downloaded BD-Live content.

• To delete the BD-Live previously

downloaded on the USB storage device for memory release, press and select [Setup] > [Advanced] >

[Clear memory].

3 Play a disc that is BD-Live enabled. 4 On the disc menu, select the BD-Live icon,

and press OK.

» BD-Live starts to load. The loading

time depends on the disc and the Internet connection.

5 On the BD-Live interface, select an item

to access.

Note

• BD-Live services var y from discs and countries.

• When you use BD-Live, data on the disc and this player

are accessed by the content provider

• Use a USB storage device with at least 1GB of free

space to store the download.

Play a Blu-ray 3D video

What you need

• A 3D compliant TV

• This player is connected to the TV through

HDMI

• 3D glasses compatible with the TV

• 3D Blu-ray disc

1 Make sure that 3D output is turned on:

press , and select [Setup] > [Video] >[Watch 3D video] > [Auto].

2 Play a Blu-ray 3D video. 3 Put on the 3D glasses for 3D effects.

• To play 3D video in 2D, turn off Blu-ray 3D output (press , and select [Setup] > [Video] > [Watch 3D video] >

[Off]).

Set up a network

Connect this player to the Internet to access the services:

• BD-Live: access online bonus features (applicable to Blu-ray discs that are BDLive enabled)

• Update software: update the software of this player via the Internet.

• Browse PC (DLNA): play photos, music, and video les streamed from your

computer.

Note

• For wireless connection, you need to use an optional

Philips Wi-Fi USB adapter (named WUB1110).

• Te Wi-Fi USB Adapter (WUB1110) is not included. To

purchase this adapter, visit shop.philips.com. If the Philips online shop is not available in your country, please contact Philips customer service. For contact details, go to www.philips.com/support.

12 EN

1 Connect this player to the Internet through

wired (Ethernet) or wireless connection.

• For wired connection, connect a network cable (not supplied) to the LAN port on the back panel of this player.

• For Wi-Fi, connect a Philips Wi-Fi USB adapter (named WUB1110) to the

(USB) connector on the front

panel of this player.

2 Perform the network installation.

PC (DLNA)

1) Press .

2) Select [Setup], and press OK.

3) Select [Network] > [Network installation], and press OK.

4) Follow the instructions on the TV screen to

complete the installation. If necessary, use the alphanumeric buttons on the remote control to enter a password.

Caution

• Before you connect to a network, familiarize yourself

with the network router, and networking principles. If necessary, read documentation accompanying network components. Philips is not responsible for lost, damaged or corrupt data.

Smartphone control

Use a smartphone to browse, control and play

media les from this player.

What you need

• An iPhone (iOS 3.1.3 and above) or Android based device (Android 2.1 and above)

• On your smartphone, download Philips MyRemote application

• For iPhone, search for the application

in App Store

• For Android based device, search for

the application in Android Market

Before you start

• Connect this player to a home network (see “Set up a network”).

• Connect your smartphone to the same

home network (see the user manual of the smartphone for details).

• Turn on this player

13EN

Control your player

Use a smartphone to browse, control and play

media les from this player.

1 Insert a data disc or USB storage device

into this player.

2 On your smartphone, tap the MyRemote

icon from the home screen.

» The name of this player is displayed on

the smartphone.

3 Select this player from the smartphone

screen.

» The smartphone used as a virtual

remote control is enabled.

4 On the smar tphone, tap the Media (Media)

tab, and then select the disc or USB source.

» The folders in the data disc or USB

storage device are displayed.

5 Open a folder, and select a le to play.

• To access the remote control, return to the previous smartphone screen, and then tap the Remote (Remote) tab. Only the relevant control buttons are enabled.

6 Tap the control buttons on the

smartphone to control play.

• To access more control buttons, swipe the screen to the left or right.

• To exit the application, press the home button on the smartphone.

Browse PC through DLNA

Through this player, you can stream and play video, music and photo from a computer on your TV.

Before you start

• On your PC, install a DLNA-compliant media server application (such as Windows Media Player 11 or higher)

• On your PC, enable media sharing and le sharing (see the “Help” document in the

media server application)

1 Connect this player and your PC in the

same home network (see “Set up a network”).

• For better video quality, use wired

network connection whenever possible.

2 Press .

» The home menu is displayed on the

TV screen.

3 Select [browse PC], and press OK.

» A content browser is displayed.

4 Select a le, and press OK to play.

• Use the remote control to control play.

Use Philips EasyLink

This player supports Philips EasyLink which uses the HDMI CEC (Consumer Electronics Control) protocol. You can use a single remote control to control EasyLink compliant devices that are connected through HDMI. Philips does not guarantee 100% interoperability with all HDMI CEC devices.

1 Connect the HDMI CEC compliant devices

through HDMI, and turn on the HDMI CEC operations on the TV and other connected devices (see the user manual of the TV or other devices for details).

2 Press . 3 Select [Setup]> [EasyLink]. 4 Select [On] under the options: [EasyLink],

[One Touch Play] and [One Touch Standby].

» EasyLink function is turned on.

One Touch Play

When a video disc is in the disc compartment, press to wake up the TV from standby, and then play a disc.

One Touch Standby

When a connected device (for example TV) is put to standby with its own remote control, this player is put to standby automatically.

14 EN

3 Change settings

This section helps you to change the settings of this player.

Note

• You cannot change a menu option that is grayed out.

• To return to the previous menu, press . To exit the

menu, press .

Picture

1 Press . 2 Select [Setup] > [Video] to access the

video setup options.

• [TV display]: Select a picture display

format to t the TV screen.

• [HDMI video]: Select an HDMI video

resolution.

• [HDMI Deep Color]: Display colors

with more shades and hues when the video content is recorded in Deep Color and the TV supports this feature.

• [Picture settings]: Select a predened

color setting.

Watch 3D video

• [Watch 3D video]: Set to 3D or 2D output when playing a Blu-ray 3D disc. The player must be connected to a 3D TV through HDMI.

Note

• If you change a setting, make sure that the TV supports

the new setting.

• For settings related to HDMI, the TV must be

connected through HDMI.

• For the composite connection (via the VIDEO

connector), select a video resolution of 480i/576i or 480p/576p under [HDMI video] to enable video output.

Sound

1 Press . 2 Select [Setup] > [Audio] to access the

audio setup options.

• [Night Mode]: Select quiet or full dynamic sound. Night mode decreases the volume of loud sound and increases the volume of soft sound (such as speech).

• [HDMI Audio]: Set an HDMI audio format when this player is connected through HDMI.

• [Digital Audio]: Select an audio format for the sound output when this player is connected through a digital connector (coaxial).

• [PCM Downsampling]: Set the sampling rate for PCM audio output when this player is connected through a digital connector (coaxial).

Note

• For settings related to HDMI, the TV must be

connected through HDMI.

• Night mode is only available for Dolby encoded DVD

and Blu-ray discs.

15EN

Network (installation, status...)

1 Press . 2 Select [Setup] > [Network] to access the

network setup options.

• [Network installation]: Start a wired or wireless installation to make the network work.

• [View network settings]: Display the current network status.

• [View wireless settings]: Display the current Wi-Fi status.

• [Name your Product:]: Re-name this player for identication in a home

network.

Preference (languages, parental control...)

1 Press . 2 Select [Setup] > [Preference] to access

the preference setup options.

• [Menu language]: Select an onscreen display menu language.

• [Audio]: Select an audio language for video.

• [Subtitle]: Select a subtitle language for video.

• [Disc Menu]: Select a menu language for a video disc.

• [Parental Control]: Restrict access to discs that are encoded with ratings.

Input “0000” to access the restriction

options. To play all discs irrespective of

the rating, select level “8”.

• [Screen Saver]: Enable or disable

screen saver mode. If enabled, the screen enters idle mode after 10 minutes of inactivity (for example, in pause or stop mode).

• [Auto Subtitle Shift]: Enable or disable subtitle shift. If enabled, the subtitle

position is changed automatically to t

the TV screen (this feature works with some Philips TVs only).

• [Change Password]: Set or change a password to play a restricted disc.

Input “0000” if you do not have a

password or if you have forgotten your password.

• [Auto Standby]: Enable or disable auto standby. If enabled, the player switches to standby after 18 minutes of inactivity (for example, in pause or stop mode).

• [VCD PBC]: Display or skip the content menu for VCD and SVCD.

Note

• If your preferred language is not available for disc

language, audio or subtitle, you can select [Other] from the menu options and input 4-digit language code which can be found at the back of this user manual.

• If you select a language which is not available on a disc,

this player uses the default language of the disc.

Advanced options (clear memory...)

1 Press . 2 Select [Setup] > [Advanced] to access the

advanced setup options.

• [BD-Live security]: Restrict or allow access to BD-Live (only for noncommercial, user-created BD-Live discs).

• [Downmix mode]: Control 2-channel stereo audio output.

• [Software update]: Select to update software from a network or from USB storage device.

• [Clear memory]: Delete the previous BD-Live download on the USB

storage device. A “BUDA” folder is

automatically created to store the BDLive download.

16 EN

• [DivX

VOD Code]: Display the

DivX

registration code or the

deregistration code for this player.

• [Version information]: Display the software version of this player.

• [Restore default settings]: Reset this player to the default settings made at the factory, except for password and parental control level.

Note

• You cannot restrict Internet access on commercial

Blu-ray discs.

• Before you purchase DivX videos and play them on this

player, register this player on www.divx.com with the DivX VOD code.

4 Update software

Before you update the software of this player, check the current software version:

• Press , and then select [Setup] > [Advanced] > [Version Info.], and press OK.

Update software via the Internet

1 Connect the player to the Internet (see

“Set up a network”).

2 Press , and select [Setup]. 3 Select [Advanced] > [Software Update]>

[Network].

» If an upgrade media is detected, you

are prompted to start the update.

4 Follow the instructions on the TV screen

to update the software.

» When the update is complete, this

player automatically turns off and on again.

Update software via USB

1 Check the latest software version on

www.philips.com/support.

• Search for your model and click on

“Software and drivers”.

2 Download the software into a USB storage

device.

a Unzip the download, and make sure

that the unzipped folder is named “UPG_ALL”.

b Put the “UPG_ALL” folder in the root

directory.

3 Connect the USB storage device to the

(USB) connector on this player.

17EN

4 Press , and select [Setup]. 5 Select [Advanced] > [Software Update]>

[USB].

» If an upgrade media is detected, you

are prompted to start the update.

6 Follow the instructions on the TV screen

to update the software.

» When the update is complete, this

player automatically turns off and on again.

Caution

• Do not turn off the power or remove the USB storage

device when the software update is in progress because you might damage this player.

5 Specifications

Note

• Specications are subject to change without notice

Region code

This player can play discs with the following region codes.

DVD Blu-ray Countries

Europe, United Kingdom

Playable media

• BD-Video, BD 3D

• DVD-Video, DVD+R/+RW, DVD-R/-RW,

DVD+R/-R DL (Dual Layer)

• VCD/SVCD

• Audio CD, CD-R/CD-RW, MP3 media, WMA media, JPEG les

• DivX (Ultra)/DivX Plus HD media, MKV

media

• USB storage device

File format

• Video: .avi, .divx, .mp4, .mkv

• Audio: .mp3, .wma, .wav

• Picture: .jpg, .gif, .png

Video

• Signal system: PAL / NTSC

• HDMI output: 480i/576i, 480p/576p, 720p,

1080i, 1080p, 1080p/24Hz

Audio

• Digital output: 0.5 Vp-p (75 ohm)

• Coaxial

• HDMI output

• Sampling frequency:

• MP3: 32 kHz, 44.1 kHz, 48 kHz

• WMA: 44.1 kHz, 48 kHz

• Constant bit rate:

• MP3: 112 kbps - 320 kpbs

• WMA: 48 kpbs - 192 kpbs

18 EN

USB

• Compatibility: Hi-Speed USB (2.0)

• Class support: USB Mass Storage Class

• File system: FAT16, FAT32

• USB port: 5V , 500mA

• Support HDD (a portable hard disc drive):

an external power source may be needed.

Main unit

• Power supply rating: 220-240V~, 50Hz -60Hz

• Power consumption: 10 W

• Power consumption in standby mode:

< 0.5 W

• Dimensions (w x h x d): 310 x 39.5 x 217.7 (mm)

• Net Weight: 1.12 kg

Accessories supplied

• Remote control and batteries

• Quick start guide

• CD-ROM built in multi-lingual user manual

(Continental Europe only)

Optional accessory

• A wireless Philips USB adapter(named WUB1110, sold separately)

• Multimedia connections: Wi-Fi

802.11b/g/n

• Connectivity: Rear connection (USB)

• Ambient temperature: 5 deg C to

40 deg C.

• Dongle dimensions (W x H x D):

28.4 x 82 x 13.4 mm

LaserSpecication

• Laser Type (Diode): AlGaInN (BD), AlGaInP (DVD/CD)

• Wave length: 398nm to 413nm (BD), 645nm to 664nm (DVD), 770nm to 800nm(CD)

• Output power: 1.7mW (BD),

0.19mW(DVD), 0.25mW (CD)

Standby information

• When the product remains inactive for 18 minutes, it automatically switches to standby or networked standby.

• The power consumption in standby or networked standby is less than 0.5W.

19EN

6 Troubleshooting

Note

• For identication and supply ratings, see the type plate

at the back or bottom of the product.

• Before you make or change any connections, make sure

that all devices are disconnected from the power outlet.

Warning

• Risk of electric shock. Never remove the casing of the

player.

To keep the warranty valid, never try to repair the player yourself. If you have problems using this player, check the following points before you request service. If you still have a problem, register your player and get support at www.philips.com/support. If you contact Philips, you will be asked for the model and serial number of this player. The model number and serial number are on the back of this player. Write the numbers here: Model No. __________________________ Serial No. ___________________________

Main unit

The buttons on this player do not work.

• Disconnect this player from the power supply for a few minutes, and then reconnect.

Picture

No picture.

• Make sure that the TV is switched to the correct source input for this player.

• For the composite connection (via the VIDEO connector) to the TV, on this player select a video resolution of 480i/576i or 480p/576p under [HDMI Video] to enable video output.

No picture on HDMI connection.

• Make sure that the HDMI cable is not faulty. If it is faulty, replace with a new HDMI cable.

• On the remote control, press and then press “731” (numeric buttons) to recover

picture display. Or wait for 10 seconds for auto recovery.

• If this player is connected to an unauthorized display device with an HDMI cable, the audio and video signals may not be output.

Thediscdoesnotplayhigh-denitionvideo.

• Make sure that the disc contains high- denition video.

• Make sure that the TV suppor ts high- denition video.

Sound

No audio output from the TV.

• Make sure that the audio cables are connected to the audio input of the TV.

• Make sure that the TV is switched to the correct source input for this player.

No audio output from the loudspeakers of the external audio device (home theater or

amplier).

• Make sure that the audio cables are connected to the audio input of the audio device.

• Switch the external audio device to the correct audio source input.

No sound on HDMI connection.

• You may not hear any sound from the HDMI output if the connected device is non-HDCP compliant or only DVIcompatible.

No secondary audio output for picture-inpicture feature.

• When [Bitstream] under the [HDMI Audio] or [Digital Audio] menu is selected,

interactive sound like secondary sound for picture-in-picture feature is muted. Deselect [Bitstream].

20 EN

Play

Cannot play a disc.

• Clean the disc.

• Make sure that the disc is correctly loaded.

• Make sure that this player supports the disc. See “Specications”.

• Make sure that this player supports the

region code of the DVD or BD.

• For DVD±RW or DVD±R, make sure that the disc is nalized.

CannotplayDivXvideoles.

• Make sure that the DivX video le is complete.

• Make sure that the video le name extension is correct.

• To play DivX DRM protected les from a USB storage device, connect this player to a TV through HDMI.

DivX subtitles do not display correctly.

• Make sure that the subtitle le has the same name as the DivX video le.

• Make sure that the subtitle le has an extension name supported by this player (.srt, .sub, .txt, .ssa, or .smi).

Cannot read the contents of a connected USB storage.

• Make sure that the format of the USB storage device is compatible with this player.

• Make sure that the le system on the USB storage device is supported by this player.

• For a USB HDD (a portable hard disc drive), an external power source may be needed.

‘No entry’ or ‘x’ sign is displayed on the TV.

• The operation is not possible.

EasyLink feature does not work.

• Make sure that this player is connected to the Philips brand EasyLink TV, and the

EasyLink option is turned on (see “Use your Blu-ray disc/ DVD player” > “Use Philips EasyLink”).

Cannot access BD-Live features.

• Make sure that this player is connected to the network (see “Use your Blu-ray disc/ DVD player” > “Set up a network”).

• Make sure that the network installation is made (see “Use your Blu-ray disc/ DVD player” > “Set up a network”).

• Make sure that the Blu-ray disc supports

BD-Live features.

• Clear memory storage (see “Change settings” > “Advanced options (BD-Live security, clear memory...)”).

Network

Wireless network is not found or distorted.

• Make sure that the network is correctly connected (see “Use your Blu-ray disc/ DVD player” > “Set up a network”).

• Make sure that the network installation is made (see “Use your Blu-ray disc/ DVD player” > “Set up a network”).

• Make sure that the wireless network is

not disturbed by microwave ovens, DECT phones, or other neighboring Wi-Fi devices.

• If the wireless network does not work properly, try a wired network installation

(see “Use your Blu-ray disc/ DVD player” > “Set up a network”).

Browse PC works slowly.

• Look in your wireless router’s user manual for information on indoor range, transfer rate, and other factors of signal quality.

• You need a high speed Internet connection for your router.

21EN

7 Safety and

important notice

Read and understand all instructions before you use this Blu-ray disc/ DVD player. If damage is caused by failure to follow the instructions, the warranty does not apply.

Safety

3D health warning

• If you or your family has a history of epilepsy or photosensitive seizures, consult a medical professional before exposing

yourself to ashing light sources, rapid

image sequences or 3D viewing.

• To avoid discomfort such as dizziness, headache or disorientation, we recommend not watching 3D for extended periods of time. If you experience any discomfort, stop watching 3D and do not immediately engage in any potentially hazardous activity (for example driving a car) until your symptoms have disappeared. If symptoms persist, do not resume watching 3D without consulting a medical

professional rst.

• Parents should monitor their children

during 3D viewing and ensure they do not experience any discomfort as mentioned above. Watching 3D is not recommended for children under 6 years of age as their visual system is not fully developed yet.

Riskofelectricshockorre!

• Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately. Contact Philips Consumer

Care to have the product checked before use.

• Never place the product and accessories near naked ames or other heat sources,

including direct sunlight.

• Never insert objects into the ventilation

slots or other openings on the product.

• Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

• Batteries (battery pack or batteries installed) shall not be exposed to excessive

heat such as sunshine, re or the like.

• Disconnect the product from the power

outlet before lightning storms.

• When you disconnect the power cord, always pull the plug, never the cable.

Riskofshortcircuitorre!

• Before you connect the product to the power outlet, ensure that the power voltage matches the value printed on the back or bottom of the product. Never connect the product to the power outlet if the voltage is different.

Riskofinjuryordamagetotheproduct!

• Visible and invisible laser radiation when open. Avoid exposure to beam.

• Do not touch the disc optical lens inside the disc compartment.

• Never place the product or any objects

on power cords or on other electrical equipment.

• If the product is transported in temperatures below 5°C, unpack the product and wait until its temperature matches room temperature before connecting it to the power outlet.

Riskofoverheating!

• Never install this product in a conned

space. Always leave a space of at least four inches around the product for ventilation.

Make sure that curtains or other objects

never cover the ventilation slots on the product.

22 EN

Riskofcontamination!

• Do not mix batteries (old and new or carbon and alkaline, etc.).

• Remove batteries if they are exhausted or if the remote control is not to be used for a long time.

• Batteries contain chemical substances, they should be disposed of properly.

Riskofswallowingbatteries!

• The product/remote control may contain a coin type battery, which can be swallowed.

• Keep the battery out of reach of children at all times!

Class II equipment symbol:

This symbol indicates that this product has a double insulation system.

Care for your product

• Do not insert any objects other than discs

into the disc compartment.

• Do not insert warped or cracked discs into the disc compartment.

• Remove discs from the disc compartment if you are not using the product for an extended period of time.

• Only use microber cloth to clean the

product.

CLASS 1

LASER PRODUCT

Care of the environment

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.

Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health.

This product complies with the radio interference requirements of the European Community.

23EN

This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.

Open source software

Philips Electronics Singapore hereby offers to deliver, upon request, a copy of the complete corresponding source code for the copyrighted open source software packages used in this product for which such delivery is requested by the respective licenses. This offer is valid up to three years after product purchase to anyone in receipt of this information. To obtain source code, please send your request in English with product type to open.source@philips.com. If you prefer not to use email or if you do not

receive conrmation receipt within 2 weeks

after mailing to this email address, please

write in English to “Open Source Team, Philips

Intellectual Property & Standards, P.O. Box 220,

5600 AE Eindhoven, The Netherlands”. If you do not receive timely conrmation of your letter,

please email to the email address above. The texts of the licenses and acknowledgements for open source software used in this product are

included on a separate leaet.

This product incorporates proprietary technology under license from Verance Corporation and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued and pending as well as copyright and trade secret protection for certain aspects of such technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-2010 Verance Corporation. All rights reserved by Verance. Reverse engineering or disassembly is prohibited.

Cinavia notice

This product uses Cinavia technology to limit the use of unauthorized copies of some

commercially-produced lm and videos and

their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted. More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http://www.cinavia.com. To request additional information about Cinavia by mail, send a postcard with your mailing address to: Cinavia Consumer Information Center, P.O. Box 86851, San Diego, CA, 92138, USA.

‘Blu-ray ’, ‘Blu-ray Disc ’, ‘Blu-ray Disc ’ logo, ‘Blu-ray 3D ’ and ‘Blu-ray 3D ’ logo are the trademarks of Blu-ray Disc Association.

HDMI, and HDMI logo and High-Denition

Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC in the United States and other countries.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent #’s: 5,451,942;5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks, & DTS 2.0+ Digital Out and the DTS logos are trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

ABOUT DIVX VIDEO: DivX

is a digital video

format created by DivX, LLC, a subsidiary

of Rovi Corporation. This is an ofcial DivX Certied

device that plays DivX video. Visit

divx.com for more information and software

tools to convert your les into DivX videos.

ABOUT DIVX VIDEO-ON-DEMAND: This

DivX Certied

device must be registered in order to play purchased DivX Video-onDemand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com

for more information on how to complete your registration.

DivX Certied

to play DivX

and DivX Plus

HD (H.264/MKV) video up to 1080p HD including premium content. DivX® , DivX Cer tied® , DivX Plus

HD and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.

BONUSVIEW™

‘BD LIVE ‘ and ‘BONUSVIEW ‘ are trademarks of Blu-ray Disc Association.

‘DVD Video’ is a trademark of DVD Format/ Logo Licensing Corporation.

Oracle and Java are registered trademarks of

Oracle and/or its afliates. Other names may be

trademarks of their respective owners.

Abkhazian 6566 Afar 6565 Afrikaans 6570 Amharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 Avestan 6569 Aymara 6589 Azerhaijani 6590 Bahasa Melayu 7783 Bashkir 6665 Belarusian 6669 Bengali 6678 Bihari 6672 Bislama 6673 Bokmål, Norwegian 7866 Bosanski 6683 Brezhoneg 6682 Bulgarian 6671 Burmese 7789 Castellano, Español 6983 Catalán 6765 Chamorro 6772 Chechen 6769

Chewa; Chichewa; Nyanja

7889 9072 Chuang; Zhuang 9065 Church Slavic; Slavonic 6785 Chuvash 6786 Corsican 6779 Česky 6783 Dansk 6865 Deutsch 6869 Dzongkha 6890 English 6978 Esperanto 6979 Estonian 6984 Euskara 6985

6976 Faroese 7079 Français 7082 Frysk 7089 Fijian 7074 Gaelic; Scottish Gaelic 7168 Gallegan 7176 Georgian 7565 Gikuyu; Kikuyu 7573 Guarani 7178 Gujarati 7185 Hausa 7265 Herero 7290 Hindi 7273 Hiri Motu 7279 Hrwatski 6779 Ido 7379 Interlingua (International)7365 Interlingue 7365 Inuktitut 7385

Inupiaq 7375

Irish 7165 Íslenska 7383 Italiano 7384 Ivrit 7269 Japanese 7465 Javanese 7486 Kalaallisut 7576 Kannada 7578 Kashmiri 7583 Kazakh 7575 Kernewek 7587 Khmer 7577 Kinyarwanda 8287 Kirghiz 7589 Komi 7586 Korean 7579 Kuanyama; Kwanyama 7574 Kurdish 7585 Lao 7679 Latina 7665 Latvian 7686 Letzeburgesch; 7666 Limburgan; Limburger 7673 Lingala 7678 Lithuanian 7684 Luxembourgish; 7666 Macedonian 7775 Malagasy 7771 Magyar 7285 Malayalam 7776 Maltese 7784 Manx 7186 Maori 7773 Marathi 7782 Marshallese 7772 Moldavian 7779 Mongolian 7778 Nauru 7865 Navaho; Navajo 7886 Ndebele, North 7868 Ndebele, South 7882 Ndonga 7871 Nederlands 7876 Nepali 7869 Norsk 7879 Northern Sami 8369 North Ndebele 7868 Norwegian Nynorsk; 7878 Occitan; Provencal 7967 Old Bulgarian; Old Slavonic 6785 Oriya 7982 Oromo 7977 Ossetian; Ossetic 7983 Pali 8073 Panjabi 8065 Persian 7065 Polski 8076 Português 8084

Pushto 8083 Russian 8285 Quechua 8185 Raeto-Romance 8277 Romanian 8279 Rundi 8278 Samoan 8377 Sango 8371 Sanskrit 8365 Sardinian 8367 Serbian 8382 Shona 8378 Shqip 8381 Sindhi 8368 Sinhalese 8373 Slovensky 8373 Slovenian 8376 Somali 8379 Sotho; Southern 8384 South Ndebele 7882 Sundanese 8385 Suomi 7073 Swahili 8387 Swati 8383 Svenska 8386 Tagalog 8476 Tahitian 8489 Tajik 8471 Tamil 8465 Tatar 8484 Telugu 8469 Thai 8472 Tibetan 6679 Tigrinya 8473 To nga (Tonga Islands) 8479 Tsonga 8483 Tswana 8478 Türkçe 8482 Turkmen 8475 Tw i

8487 Uighur 8571 Ukrainian 8575 Urdu 8582 Uzbek 8590 Vietnamese 8673 Volapuk 8679 Walloon 8765 Welsh 6789 Wolof 8779 Xhosa 8872 Yiddish 8973 Yoruba 8979 Zulu 9085

Language Code

BDP2180_12_UM_V2.0

Magnavox BDP2180 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual