Magnavox 6P4840 Owner's Manual

IlL r T

V

IIII |

Projection Television

Owner's Manual

A

V

Once your MAGNAVOX purchase is registered, you're eligible to receive all the privileges of owning a MAGNAVOX
product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take

advantage of these important benefits.

Verification

Registe_r_ your product within

MAGNAVOX _rranty.

Confirmation

Your completed Warranty

Registration Card serves as
verification of ownership in the

event of product theft or loss.

.Model !
Registration

Returning your Warranty Reg'_tration
Card right away _tees you'll

receive all the information and special

offers which you qualify for as the

owner of your model.

Congratulations on your purchase, and _VOX

weJcome to the "family!"

Dear MAGNAVOX product owner: Smart _ry smart _

Thank you for your confidence in MAGNAVOX. You've selected one of the best-built, best-backed products
available today. And we'll do everything in our power to keep you happy with your purchase for many years to come.

As amember of the MAGNAVOX "family," you're entitled to protection by one of the most comprehensive warranties and outstanding
service networks in the industry.

What's more, your purchase guarantees you'll receive all the information and special offers for which you qualify, plus easy accessto
accessories from our convenient home shopping network.

And most importantly you can count on our uncompromisingcommitment to your total satisfaction.
All of this is our way of sayingwelcome-and thanks for investing in a MAGNAVOX product.

Sincerely,

Robert Minkhorst

President and Chief Executive Officer

P.S. Remember, to get the most from your

MAGNAVOX product, you must return your

Warranty Registration Card within I 0 days.
So please mail it to us right now!

For Customer Use

Enter below the Serial No. which is located on the rear of the cabinet. Retain this information for future reference.

Model No. Serial No.

Know these

safetysymbols

CAUTION: TO REDUCE THE RISK OF ELECTRIC 5HOCK, DO NOT

REMOVE COVER (OR BArKI. I;0 USEFI-SERVICEABLEPARTS

INSIOE. REFER 5EFMCING TO_JALIFIEO SERVICE PERSONNEL,

A This "bo' of lightning" indicates uninsulated material within your unit may cause an electrical shock.

For the safety of everyone in your household, please do not remove product covering.
_The "exclamation point" calls attention to features for which you should read the enclosed literature

closely to prevent operating and ma!0tenance problems.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN

OR MOISTURE.
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, and fully insert.

ATTENTION: Pour _viter les chocs electriques, introduire la lame la plus large de la fiche dans la borne
correspondante de la prise et pousser jusqu'au fond.

SAFETYINSTRUCTIONS- Readbeforeoperatingequipment

'"-is productwasdesignedandmanufacturedto meetstrictqualityand

_ty standards.Thereare,however,someinstallationandoperation

_ecautionswhichyoushouldbeparticularlyawareof,

1. ReadInstructions- All the safety and operatinginstructions should
be readbefore the appliance isoperated.

2. Retain Instructions - The safety and operating instructions should
be retainedfor future reference.

3. HeedWarnings - All warnings onthe applianceand in the operating
instructions should beadheredto.

4. FollowInstructions - Alloperating and use instructions should be

followed.

5. Water and Moisture - The applianceshould not be used near water

- for example, near a bathtub, washbowl,kitchensink, laundrytub,
i,na wet basement or near a swimming pool,etc.

6. Cads and Stands- Theapplianceshould beusedonlywitha cart or

standthat is recommended bythe manufacturer.

6A. _ An appliance and cart combination should be moved

with care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart combination

to overturn.

7. Wall or Ceiling Mounting - The appliance should be mounted to a
wall or ceiling only as recommendedby the manufacturer.

8. Ventilation - Theapplianceshould besituatedso that its location or
position does not interfere with its proper ventilation. For example,
the appliance should not besituated on a bed, sofa, rug, or similar
surface that may block the ventilation openings; or, placed in a
built-in installation, such as a bookcaseor cabinet that may impede

the flow of air through the ventilation openings.

9. Heat - The appliance should besituated away from hear sources
such as radiators, heat registers, stoves, or other appliances
(including amplifiers) that produce heat.

40. Power Sources - The appliance should be connected to a power
supply only of thetype described in the operating instructions or as
markedon the appliance.

11. Power-Cord Protection - Power supply cords should be routed so
that they are not likelyto be walked on or pinched by items placed
upon or against them, paying particular attention to cords and
plugs, convenience receptacles, and the point where they exit from

the appliance.

12. Cleaning- The appliance should be cleaned only as recommended
bythe manufacturer.

13. Power Lines - An outdoor antenna should be located away from
power lines.

14. Outdoor AntennaGrounding- If an outside antennais connectedto

the receiver, be sure the antenna system is grounded so as to

providesome protection against voltage surges and builtup static

charges.

Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984,
provides information with respect to proper grounding of the mats
and supporting structure grounding of the lead-in wire to an

antenna discharge unit, size of grounding connectors, location of
antenna-discharge unit, connection to grounding electrodes and
requirements for the grounding electrode. See Fig. below.

15. Non-use Periods - The power cord of the appliance should be
unplugged from the outlet when left unused for a long period of

time.

18. ObjectandLiquid Entry - Care should be takenso that objects do
not fall and liquids are not spilled into the enclosure through

openings.

17. Damage RequiringService - The appliance should be serviced by

qualified service personnelwhen:
A. Thepower supply cord or the plug has beendamaged; or

B. Objects have fallen, or liquid has been spilled into the

appliance;or

C. Theappliance has been exposedto rain;or
D. Theappliance does not appear to operate normally or exhibits

a marked changein performance; or

E. Theappliancehas been dropped, or the enclosure damaged.

18. Servicing - The user should not attempt to service the appliance

beyond that described in the operating instructions. All other

servicing should be referred to qualified service personnel.

Notetothe CATVsysteminstaller:This reminderis providedto callthe
CATVsysteminstaller'sattentionto Article 820-40 of theNEC that

providesguidelinesfor propergroundingand,inparticular,specifiesthat
thecableground shallbe connectedto the groundingsystemof the
building,asclosetothepointofcableentryaspractical.

[

EXAMPLEOFANTENNAGROUNDINGAS PERNATIONALELECTRICALCODE(NEC)

ExampleofAntennaGrounding
;asperNEC- NationalElectricCode

ANTENNALEADIN WIRE

_ ANTENNADISCHARGEUNIT (NECSECTtONelo-zel

:__ GROUNDINGCONDUCTORSINECSECTIO_810-21)

.__ [--_;'_J -I" ..GROUIDCLAMPS

-----__ POWERSERVICEGROUNDINGELECTRODESYSTEMINECAnT25OPAR'_H)

ELECTRICSERVICEEQUIPMENT

MAC3964

3

[_ Gettin_ Started

Welcome/Product Registration ................... 2

Safely/Precautions ..................................................... 3

Table of Contents ....................................................... 4

Features and Model Information ................................ 5

On-Screen Features

PICTURE MENU
<_Adjusting Color, Brightness, Sharpness,

Tint, and Picture Controls ................................... 6

_'Using the Clearview Control ............................... 7

_,Adjusting the TV's Convergence Control ........... 8

_Using the Flesh Correction Control .................... 9

<_Ghost Cancellation Feature Information ............. 9

FEATURES MENU

¢, Selecting a Picture Source/RF Switch .............. 10

_>Setting the TV for Closed Captioning ............... l l

_Setting the TV for Cable or Antenna Signals.... 12

_-Adding Channels in Memory (Automatically). 13

,ffAdding Channels in Memory (Manually) ......... 14

_Setting the TV Clock ......................................... 15

_,Tum-On Timer .................................................. 16

_,Using the Sleep Timer Control ......................... 17

_,Adjusting the Channel Display Control ............ 18

_Using the Time/Channel Reminder Control ...... 19

_,Using Parental Control to Censor Channels 20-2 l

_,Using the Channel Label Control ...................... 22

_,Using the Language Selection Control .............. 23

SOUND MENU

_Adjusting Bass, Treble, and Balance Sound

Controls ............................................................. 24

<_Setting the Bass Boost Control ........................ 24

<_Setting the TV for Stereo and SAP Programs ..25

_Using the Sound Image Control ........................ 26

<_Using the Volume Display Control ................... 26

<_Using the TV Speaker On/Off Control with

the Audio Output jacks ..................................... 27

_.Surround Sound Speaker Connections and

Variable Audio Output Control ................... 28-29

,q_rsing the TV's Audio/Video Input and

Output Jacks .............................................. 30-33

i Remote Control Operation

Using the Remote Locator Feature ........ 34-35

Setting the Smart Picture Control .......... 36-37

Using Smart Sound Control ..................................... 38

Using the Smart Surf Control .................................. 39

Setting the Remote to Work VCRs .................... 40-41

Setting the Remote to Work

Cable TV Converters .......................................... 42-43

Setting the Remote to Work VCRs or Cable

Converters - "Search Method" ................................. 44

Using the Remote's VCR buttons ............................ 45

_-_ Picture-In-Picture (PIP)

How to Use PIP (Connections) ............. 46-47

How to Use PIP with the TV Remote ................ 48-49

Selecting the Picture Source for PIP ........................ 50

Adjusting Picture-in-Picture Color and Tint ............ 51

More PIP Connections (Cable Converter) ............... 52

a_ General Information

TV Help Menu ........................................... 53

Tips if Something Isn't Working ............................. 54

Glossary of TV Terms ............................................. 55

Index ........................................................................ 56

Factory Service Locations .................................. 57-58

Warranty .................................................................. 59

Accessories .............................................................. 60

Use the simple Set-Up Guide (supplied

your TV information packet) for details on:

• Antenna Hook-ups

• First Time Set-Up
(Automatic Settings)

• Basic TV and Remote
Control Operation

• On-Screen Menu Use

Copyright © L996 Philips Consumer Electronics Company. All rights reserved.

4

FirstTimeSetUp- automatically sets the TV for

local channels and the correct picture signal (antenna
or cable). It even helps you make the necessary
cormections for the Picture-In-Picture (PIP) feature.

Infrared Remote Control - operates your TV set and
a variety of wireless remote control VCRs and Cable
TV Converters. A special "Locator" feature can also
help you find the remote when it has been stuck out of
sight or misplaced.

Standard TV broadcast (VHF/UHF) or Cable TV
(CATV) channel capability.

Ch)sed Captioning - allows the viewer to read TV
program dialogue or voice conversations as on-screen

text.

Automatic Programming of channels - for quick and
easy selection of favorite stations available inyour

area.

Picture-In-Picture (PIP) - can show a TV program

and the direct video output from an accessory (VCR,
etc.) onto the TV screen at the same time.

Parental Control for "Censoring" - this feature can
block out channels to keep children from watching

undesirable programming.

Stereo-Ready TV - with a built-in audio amplifier and
a twin speaker system, reception of TV programs in

both broadcast stereo sound or (SAP) bilingual
broadcast are available.

On-Screen Features - display helpful information for

the setting of TV controls (such as help messages,

operating tips and glossary).

Audlo/'v'ideo Jacks - for direct connections with

VCRs (and other accessories) for quality TV picture
and sound playback.

Surround Sound - this TV set contains external;
audio speaker connections for a more dynamic sound

effect.

Sleep-Timer - automatically turnsthe TV OFF at
preset time intervals.

Smart Button - for the control of TV Sound and the

Picture levels. Use the Smart Button on the remote to
quickly adjust Smart Sound (to set TV Volume levels
during program changes or commercial breaks); Smart
Picture (for programmed video video level
adjustments on a variety of program sources); and

Smart Surf (for quick one button channel selection of

up to 10 of your favorite channels).

As you unpack your TV please note that the
following items have been included with your set:

• Owner's Manual

Safety Tip Information

Factory Service Center Locations

• Warranty Registration Card

• Remote Control Transmitter

° Batteries for Remote Control Use

Please take a few minutes to complete your
registration card. The serial number for the TV is
on the back of the set.

Refer to the back of this manual for instructions
on the cleaning and care of the TV.

To ensure that picture screen performance is of the
highest quality you have been provided with a
Projection TV Screen Cleaning System. The Screen
Cleaning system consists of a Magnetic Cleaning

Cloth (designed to remove dust particles from the
screen) and a special type of Cleaning Fluid
formulated to cut through oily fingerprints and
smudges.

Your Projection screen is made of thousands of
vertical ridges that help enhance and define the color
television images you view on the screen. These
ridges can collect airborne dust which reduces the
clarity and brightness of your TV picture. The
Magnetic Cleaning Cloth works well enough alone
to remove dust from your screen. If the screen is
very dirty from smudges and residue, then the Screen
Cleaning Fluid should be used.

Note: the supplied Screen Cleaning Fluid should
never be sprayed directly onto the Projection TV
screen. It should be applied directly to the Magnetic
Cleaning Cloth and then wiped onto the screen's
vertical ridges (with a top-to-bottom downward
motion stroke).

1

r_o adjust your TV color and

picture controls, select a TV
channel and follow the steps shown
below:

:Select BRIGHTNESS,
PICTURE, COLOR, TINT, or
SHARPNESS picture control.

With the PICTURE MENU on

screen, move the REDhighlight

with the MENU (M) 45_ buttons.
Then press the MENU button.

<_ Press the (+) or (-) buttons to

I adjust the selected control.

<_ Press the STATUS button to

cle,ar the screen.

Remember. When the bar

J scale is centered, control

settings are at normal mid-range
levels.

_.BIGHTNESS Press (-) or (+) until

dark parts of the picture show good
detail.

PICTURE Press (-) or (+) until

whitest parts of the picture are as
bright as you prefer.

Press (-) or (+) to add or

eliminate color.

Press (-) or (+) to obtain

natural skin tones. (Also see Flesh
Co:rrection on page i4 for more

infi_nnation).

Press (-) or (+) to

improvedetailin the picture.

rm

,/ !

_/%a_Mt)h_:Porne 'Stof (M)button to view additional

controls grouped under same

Ifeature heading. For

I Example: Tint, Brightness,
I Picture, etc.

__ • L

HOW TO SELECT FEATURES

(WITH B_NS ON THE REMOTE)

Press MENU (M)

to select RED

highlighted

Press MENU (M)

• • to move Up
and Down within
the Menu.

Press MENU (M)4I I1_

to move from Side-to-

Side within the Menu.

lwearview is a sharpness feature

hich smoothes out
background snow (or picture noise)
without losing picture image detail
or crispness.

_> Select CLEARVIEW control.

With the PICTURE MENU on

screen, move the RED highlight

with the MENU (M) _ buttons.
Then press the MENU button.

d--__ Press the MENU &Y buttons

to move the RED highlight. Press
the MENU button to select (tl) the
ENHANCED mode.

_ Press the STATUS button to

I clear the screen.

@

MAIN MENU

D iL

_nvergence is the correct

•lining up of the red and blue

light paths on the TV screen.

NOTE: If no color fringing (see

Smart Help) shows, then no
Convergence adjustments are
necessary for your TV.

> Select CONVERGENCE
control.

With PICTURE MENU (2 of 2) on
screen, move the REDhighlight

wil_hthe MENU (M)45) buttons.
Then press the MENU button.

<_If there isRED or BLUE color

fringing on the White cross, press
the MENU button to continue.

A

,_ Press the MENU (_l_buttons

to move the red or blue cross

directly over the white cross on the

TV screen.

The red orblue cross is properly
adjusted when it is completely
merged with the white cross. (No
color appears around the edge of
the white cross).

<_ Press the STATUS button to

clear the screen when convergence
adjustments are complete.

Remember. Convergence

f has been set at the factory for

best viewing, but if one or more of
the (red or blue) colors appear
around the edges of objects (color
fringing) follow the steps given in
this section.

=888

o8o

PICTURE MENU

PICTURE MENU

_ there i_ RF_ o_ BLUE

fringeontheWHITEcross,

usethis adjustment to

impro=T=cturo"

Press"M" to Continue

Press"_O_:; Return

1

T

N

3 '

,%_II

se the Flesh Correction

ontrol to keep skin tone hues

(or facial tint)from varying from

TV channel to TV channel.

_> Select FLESH

CORRECTION control.

With PICTURE MENU (2 of 2) on
screen, move the RED highlight

with the MENU (M) 4_ buttons.
Then press the MENU button.

_ Press the MENU AV buttons

to move the RED highlight. Press
the MENU button to turn (tJ) the
FLESH CORRECTION control
ON.

_> Press the STATUS button

to

clear the screen.

0

RCTORE MENU

!

OyUldn't it be great to view

our TV picture free of
ghosts or other image problems?
Well, your TV offers the first real
step toward reducing or totally
eliminating ghosting and other
image interference. This should be
especially good news for those
home viewer's that currently use

external or outdoor antennas to
supply their picture.

Soon local stations will broadcast
their TV programs with Ghost

Cancellation information encoded
in the TV signal. These encoded
signals, when passed through an
accessory device and the special
circuitry provided in your TV, can
dramatically reduce ghost line
images and other interference
problems.

Contact your dealer or call our
Information Center number (423)
475-8869for more details on this
exciting new development in

television broadcast technology.

i2_am

-H

Refer to the Owner's Manual with the
Ghost Cancellation device for detailed

instructions on its hook-up and use.

TV BROADCAST

SIGNAL

BACK OF TV

®

ACCESSORY GHOST

CANCELLATION DEVICE

he picture for the TV can come

hrough either the ANTENNA
plug, or the A UDIO/VIDEO INput
jacks (on the rear of the TV). The

Picture Source control simply tells
the TV which one of these picture

sources it is to show on the TV
screen.

_ Select PICTURE SOURCE

SELECT control.

With the FEATURES MENU on
screen, move the RED,highlight
wilt the MENU (M) _ buttons.

Then press the MENU button.

<_ Press the MENU &_' buttons

to move the RED highlight. Press
the MENU button to turn the
desired PICTURE SOURCE

control ON (_").
ANTENNA- for a picture signal

coming from the ANTENNA plug
on the TV.

VCR/AUX 1- for a picture signal
coming from the VCR/AUX 1
Video Input jack on the rear

of tile TV.
AUX 2- for a picture signal

coming from the AUX/IN 2 Video
Input jack on the rear of the TV.

AIXX 3- for a picture signal
coming from the Video Input jack

on tJhefront of the TV.

<_ Press the STATUS button to

I clear the screen_

_= MAIN MENU

,J,i,t,

._ FEATURE MENU.

1 0F4_

VCR/AUX

AUX 2

AUX 3

Remember, !
the VCR/AUX 1,

AUX 2, and AUX 3
modes must have a

video signal source
connected (to their

INPUT plug) or the
TV screen will be

blank. (See page 30
for connection

details).

n optional RF Switcher is available
t_t will allow an Antenna/Cable TV

signal and another video accessory
(VCR, Video Disc Player, etc.) to be

connected to the TV at the same time.

Comu_ction instructions are given with
the accessory RF Switcher, but be sure
to tutm the TV's power OFF (and
unph_g its AC power cord) when

connecting the RF Switcher to the RF
Switch Input jack on the rear of the TV.

Replug the TV' s AC Power Cord into

the wall outlet and turn the TV ON. The
TV' s Picture Source Menu will now

show an Accessory Signal Source option
available for selection.

The accessory RF Switcher can be
purcimsed or ordered from your dealer.
If your dealer does not carry the
accessory, call the Information Center

number (listed with your warranty)for

furtl_er assistance.

VlOEO

31Y3_

10

lOSed Captioning (CC) allows

ou to read the voice content of

television programs on the TV
screen. Designed to help the hearing
impaired this feature uses on-screen

"text boxes" to show dialogue and

conversations while the TV program

is in progress.

_ Seloet CLOSED

CAPTIONING control.

With the FEATURES MENU on

screen, move the RED highlight

with the MENU (M) _ buttons.
Then press the MENU button.

@ Press the MENU AV buttons

to move the RED highlight. Press
the MENU button to select (t,,") the

desired Closed Caption mode - For
Example: "ALWAYS ON" and

'_APTION 1".

CAPTION 1, 2, 3, 4:

dialogue (and descriptions)
for the action on the captioned
TV program shows on-screen.
(See Important Note on this
page.)

TEXT 1, 2, 3, 4:

often used for channel guide,
schedules, or bulletin board

information for CC programs.

<_ After making your Caption

mode

selection, press the STATUS button

to clear the TV screen. The selected

Closed Caption mode will be active.

To cancel, set the Closed Captioned

feature to OFF when finished

Remember. Broadcast

stations will often use
spelling abbreviations, symbols,
dropouts and other grammatical

shortcuts in order to keep pace

with the on-screen action. These
type factors vary upon the source

of the captioned text material and
do not indicate a need for service

on the part of the "IV.

NOTE: Not all TV programs and product commercials are made fbr broadcast
with Closed Caption (CC) information included. Neither are all Closed Caption
modes (CAPTION 1-4; or TEXT 1-4) necessarily being used by a broadcast station
during the transmission of a closed caption program. Usually "CAPTION 1" is the
most used mode to view captioned material. Refer to your area's TV program
listings for the stations and times of Closed Caption shows.

,,, i ,i,

DURING

_._t the TV to

whenever the

on the

CAPTION I mode

Example Screen Display

Closed Caption informalion will usually aplxar
in black ",rodwhite (although _ broadca_sters
or networks may occ'-,_ionally use color to
highlight or draw attention to certain areas.)

FULL SCREEN TEXT

will block TV screen from viewing

I

ou need to make sure the TV is

. set to pick up either Cable TV

or Antenna signals. In other words
the TV needs to know if you

connected a Cable TV signal or a
normal antenna to its ANTENNA

plug.
NOTE: If you went through First

_ime Setup (in your Quick Use
Guide), this task has already been

completed for you.

_ Select CABLE CHANNEL

TUNING control.

With the FEATURES MENU on

screen, move the REDhighlight
with the MENU (M)4_ buttons.

Then press the MENU button.

,_ Press the MENU ,t_' buttons

to move the RED highlight. Press
the MENU button to select (t,J) th_

desired mode - For Example:
CABLE.

(:'.ABLE- If you DO have

Cable TV connected

to the TV. Channels

1-125 available.

NORMAL- If you have an

Antenna connected
to the TV. Channels
2-69 available.

<_ Press the STATUS button

to

Clear the screen.

O

MAIN MENU

®

=888

08o°

FEATURE MENU

rm

10E4_

D NORMAL

12

Ur TV can automatically set itselJ

r local area (or Cable TV)
channels. This makes it easy for you
to select only the TV stations in your
area when the CHANNEL • •

buttons are pressed.
NOTE: lf you went through First

Time Setup (in your Quick Use
Guide), this task has already been
completed for you.

!_ Select CHANNEL MEMORY

(START AUTO-PROGRAMMING)

control.

With the FEATURES MENU on

screen, move theRED highlight with
the MENU (M)<_) buttons. Then
press the MENU button.

<_ Press the MENU button to turn

AUTO-PROGRAMMING ON.
The TV shows which channel

numbers are "SAVED" (u'r) as they
are added into memory.

"Auto-programming CHANNEL

MEMORY is finished" shows when
the TV is through adding channels.

<_ Press the STATUS or Menu (M)

button to clear the screen.

0

Try it out. Press the

CHANNELAY buttons

and see which channels you can
select.

Remember, an Antenna or Cable
TV signal must first be connected
to your TV so that channels can be

saved.
If you want to delete any

unwanted channels from the TV's
memory, see "ADD/DELETE
CHANNELS" on the next page.

MAIN MENU

®

=888

°8o°

t,_ Channel Numbers are f
Saved in Memory

FEA'nJRE MENU

rm

I 10F4_

AUTO-PROGRAMMING

CHANNEL MEMORY

1 2_,," 3v" 4v*
5€' 6v" 7_ 8_'

9_,'_ 10 11 12
13 14 15 16
17 18 19 20
21 22 23 24

Press "M" to

13

Auto-Programming (see

flprevious page) adds all the

channels it can find (on your

Antenna or Cable TV system) into

the TV's memory. Add/Delete
Channels makes it easy for you to
add other channels, or drop

unwanted channels, from the list of
channels in the TV's memory.

_, Select CHANNEL MEMORY

(ADD/DELETE CHANNELS)
control.

'Withthe FEATURES MENU on

sereen, move the RED highlight
with the MENU (M) _-_buttons.

v

Then press the MENU button.

_ Press the CHANNEL AV or

I number buttons to select the

channel you want to add or delete.

_> Press the MENU button to

I*

ADD the channel into the TV's

memory.
Press the MENU ,_ button to

DELETE the channel from
memory.

Repeat steps 2 and 3 for each
channel you wish to add or delete.

_> Press the STATUS MENU

or

button to clear the screen when

through.

Remember. You can also

add the VCR/AUX, AUX 2,

or AUX 3 modes just like a
channel. Then by pressing the

CHANNEL AV buttons the

AUX(iliary) mode can quickly be
selected to use the desired set of

Input jacks on the TV (see page

30).
Note: VCR/AUX, AUX 2, and

AUX 3 modes are located
between the lowest and highest

channel numbers within the
ADD/DELETE CHANNEL
control screen.

MAIN MENU

FEATURE MENU

CHANNEL MEMORY

_1_%, I *l,I,

".! _o/m,E'&--i;

rm

SELECT CHAI"JNEL

to DELETE CHANNEL

14

our TV comes with an on-

creen clock. During normal

operation the clock appears on the
screen with every channel change
(and when the STATUS button is

pressed).

NOTE: If you went through First

Time Setup (in your Quick Use
Guide), this task has already been

completed for you.

_1_ Select SET CLOCK control.

With FEATURES MENU (2 of 4)
on screen, move the 1;_D highlight

with the MENU (M)4-_ buttons.
Then press the MENU button.

_2_ Press the remote's number

buttons to set the time clock.

_ Press the STATUS button to

set the clock in operation and clear

the screen.

Remember, be sure to

[[ press "0"first and then the

hour number for single digit
entries.

The remote's MENU (M) 4_
buttons can also be used to set the

hours, minutes and AM/PM
portions of the clock.

TV Clock settings may be lost
when the TV is unplugged (or AC
power to the set is interrupted.)

IIII I

FEATURE MENU

_1__ 1'_'4 _'_=,==_

t

FEATURE MENU

SET CLOCK & C_ TIMER

15

t like an alarm clock you can

et the TV to turn itself on at the

s_e time everyday.

<_ Select SET ON TIMER

control.
With FEATURES MENU (2 of 4)

on screen, move the RED highlight
with the MENU (M) 4-_ buttons.
Then press the MENU button.

_ Press the MENU AV and

MENU (M) buttons to highlight

and select "ON" (tJ).

_ Press the MENU AV and

then the MENU (M) buttons to

select "SET ON TIME".

_ Press the remote's number

buttons to set the "TURN ON"
time for the TV. (Press MENU •
Y for AM or PM.)

> Press the STATUS button to

L set the "ON TIME" and clear the

;creen. I1_

MAIN MENI

........:.:.::::::::!_:+:5:_:+i+_5_+_i+iii::iii!_i_i_i+::!++ili+!!i++]_+_i+!+::::::::::.:.:..........

++_itii[iii::ii+i::i::i::i::i::i+ii::iiiii+:,_i::iiiii:?:i+ii::i::i::iiiii:?:ili::_i::[!iiiii[/_i[+iiiiiii+iiiiiiiii::i::i::i+i+::+:++:++...........

FEATURE MENU

,_+l,l,

i

FEATURE MENU

rm

SET CLOCK & ON TIMER

• I ' I , +t _

SET ON TIMER

rm

16

Veyou ever fallen asleep in

nt of the TV only to have it
wake you up at two in the morning
with a test pattern screeching in

your ears? Well, your TV can save
you all that trouble by
automatically turning itself off.

€_1,1,1,_Select SLEEP TIMER control.

With FEATURES MENU (2 of 4)
on screen, move the RED highlight

with the MENU (M) 4;_ buttons.
Then press the MENU button.

€/2,,_ Press the MENU _1 I_buttons

to pick the amount of time (15

minutes to 2 hours ahead) before
the TV will turn itself off.

'_ Press the STATUS or MENU

(M) button to clear the screen after

you have set the time for the TV to
turn off.

Remember, to see how

! many minutes are left before

the TV shuts itself off, reselect the
SLEEP TIMER control screen.

To stop a SLEEP TIMER setting,
reset the timer back to OFF.

(Turning the TV off and on, or
pressing a button during the last
minute of a timer setting, will also
cancel a setting.)

A few seconds before the TV is to
shut off a message will come on the
screen telling you GOOD NIGHT.

,i, I ,l,

FEATURE MENU

1"_'4 ''_'

I

FEATURE MENU

@SET [_-OCK _ " _ "

P OF ,4_

!

17

"[]_7ith the Channel Display

V V control you can change the

size and location of the on screen

channel and clock information.

@_ Select CHANNEL DISPLAY

control.

'With FEATURES MENU (2 of 4)

on screen, move the RED
highlight with the MENU (M)_

buttons. Then press the MENU
button.

_;' Press the MENU A_' and

MENU (M) buttons to highlight
and select (u,") the LARGE or

SMALL display control.

_> Press the STATUS button to

clear the screen.

I

Try it out. Press the

CHANNEL A,V buttons and you
should see the Display Size you

selected.
Remember. The SMALL SIZE

display shows only the channel
number, not the time (or clock).

o_/_ii_

MAIN MENU _.'_!_i_

,I,l,l_

= FEATURE MENU =

1'O{F'4_ ' _'====_'

V

= FEATURE MENU

HALF HOUR m

,REMINDER, _-_.

20F4=

1

D SMALL - Channe!/Label

SMALL

LARGE

12

CHANNEL DISPLAY OPTIONS

12

18