Magnavox 6P4830, 6P5430 Owner's Manual

Projection Television

Owner's Manual

Once your MAGNAVOX purchase is registered, you're eligible to receive all the privileges of owning

a MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with your

purchase at once. And take advantage of these important benefits.

Oongratulations on your purchase,
and welcome to the "family!"

MAGNAVOX

Smart. Very smart."

Dear MAGNAVOX product owner:

Thank you for your confidence in MAGNAVOX. You've selected one of the best-built, best-backed

products available today. And we'll do everything in our power to keep you happy with your purchase
for many years to come.

As a member of the MAGNAVOX "family," you're entitled to protection by one of the most compre-

hensive warranties and outstanding service networks in the industry.
What's more, your purchase guarantees you'll receive all the information and special offers for which

you qualify, plus easy access to accessories from our convenient home shopping network.
And most importantly you can count on our uncompromising commitment to your total satisfaction.

All of this is our way of saying welcome-and thanks for investing in a MAGNAVOX product.
Sincerely,

Robert Minkhorst
President and Chief Executive Officer

P.S. Remember, to get the most from your MAGNAVOX

product, you must return your
Warranty Registration Card within 10 days. So
please mail it to us right now!

71

Know these

safetysymbo/s

¢AUlION: TO IIEOU¢! IIHE RiIK Of El I_CTRICIIHO¢I(_ 00 NOT

EMOW!COVtmI0_IteOq. NO UUR_mnCEMU[ pNml

NIIOI. REFER IRVlCmO TO OIJAlJIq_ IlllVl_ I_IqION_J..

A This 'loolt of lightning" indicates uninsulated material within your unit may cause an electrical
shock. For the safety of everyone in your household, please do not remove product covering.

,_The "exclamation point" calls attention to features for which you should read the enclosed lit-
erature closely to prevent operating and maintenance problems.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE.

CAUTION: To prevent electric shock, match wide blade of plug to wide slot, and fully insert.
ATTENTION: Pour eviter les chocs electriques, introduire la lame la plus large de la fiche dons la

borne correspondante de la prise et pousser jusqu'au fond.

SAFETYINSTRUCTIONS- Readbeforeoperatingequipment

Thisproductwasdesignedandmanufacturedto meetstrictqualityand
safetystandards.Thereare,however,someinstallationandoperation
precautionswhichyoushouldbeparticularlyawareof.

1. ReadInstructions- All thesafetyandoperatinginstructionsshould
bereadbeforetheapplianceisoperated.

2. RetainInstructions- Thesafetyandoperatinginstructionsshould
be retainedfor futurereference.

3. HeedWarnings- Allwarningsontheapplianceandintheoperating

instructionsshouldbeadheredto.

4. FollowInstructions- All operatinganduseinstructionsshouldbe
followed.

5. WaterandMoisture-Tl;eapplianceshouldnotbeusednearwater

- forexample,neara bathtub,washbowl,kitchensink,laundrytub,
ina wetbasementornearaswimmingpool,etc.

6. CartsandStands- Theapplianceshouldbeusedonlywitha cartor

standthatisrecommendedbythemanufacturer.

6A. _ An applianceand cartcombinationshould be moved

withcare.Quickstops,excessiveforce, anduneven
surfacesmaycausetheapplianceandcartcombination
tooverturn.

7. Wall or CeilingMounting- Theapplianceshouldbe mountedto a
wallorceilingonlyasrecommendedbythemanufacturer.

8. Ventilation- Theapplianceshouldbesituatedsothatitslocationor

positiondoesnotinterferewithitsproperventilation.Forexample,

theapplianceshouldnotbesituatedona bed,sofa,rug,or similar
surfacethat mayblock the ventilationopenings;or, placedin a

built-ininstallation,suchasa bookcaseor cabinetthatmayimpede

theflowofairthroughtheventilationopenings.

9. Heat- Theapplianceshouldbesituatedawayfrom hearsources

suchas radiators,heatregisters,stoves, or other appliances
(includingamplifiers)thatproduceheat.

10. PowerSources- Theapplianceshouldbe connectedto a power
supplyonlyofthetypedescribedintheoperatinginstructionsoras
markedontheappliance.

11. Power-CordProtection- Powersupplycordsshould be routedso
thattheyare notlikelyto bewalkedonor pinchedby itemsplaced
uponor againstthem,payingparticularattentionto cordsand
plugs,conveniencereceptacles,andthepointwheretheyexitfrom
theappliance.

12. Cleaning- Theapplianceshouldbecleanedonlyasrecommended
bythemanufacturer.

13. Power Lines- An outdoorantennashouldbelocatedawayfrom

powerlines.

14. OutdoorAntennaGrounding- If anoutsideantennais connectedto
thereceiver,be sure the antennasystemis groundedso as to
providesomeprotectionagainstvoltagesurgesandbuilt up static
charges.

Section810 oftheNationalElectricCode,ANSI/NFPANo.70-1984,
providesinformationwithrespectto propergroundingofthe mats
and supportingstructure groundingof the lead-inwire to an
antennadischargeunit,size of groundingconnectors,locationof
antenna-dischargeunit,connectionto groundingelectrodesand

requirementsfor thegroundingelectrode.SeeFig.below.

15. Non-use Periods - Thepower cordof theapplianceshouldbe
unpluggedfrom the outletwhenleftunusedfor a longperiodof

time.

16. ObjectandLiquid Entry- Careshouldbetakensothatobjectsdo
not fall andliquidsare not spilledintotheenclosure through

openings.

17. DamageRequiringService- Theapplianceshouldbe servicedby
qualifiedservicepersonnelwhen:

A. Thepowersupplycordortheplughasbeendamaged;or
B. Objectshave fallen, or liquid has been spilled into the

appliance;or

C. Theappliancehasbeenexposedtorain;or
D. Theappliancedoesnotappearto operatenormallyorexhibits

a markedchangeinperformance;or

E. Theappliancehasbeendropped,ortheenclosuredamaged.

18. Servicing- Theusershouldnotattemptto servicethe appliance

beyondthat describedinthe operatinginstructions.All other
servicingshouldbereferredtoqualifiedservicepersonnel.

Notelo theCATVsysteminstaller: Thisreminderis providedto callthe
CATVsysteminstaller'sattentiontoArticle820-40 of theNEC that
providesguidelinesforpropergroundingand,inparticular,specifiesthat
thecablegroundshall be connectedto the groundingsystemofthe
building,asclosetothepointofcableentryaspractical.

EXAMPLEOFANTENNAGROUNDINGAS PERNATIONALELECTRICALCODE(NEC)

ExampleofAntennaGrounding
as per NEC- National ElectricCode

ANTENNALEADINWIRE

ANTENNADISCHARGEUNIT (NECSECTION810-20)

GROUNDINGCONDUCTORS(NEC SECTION810-211

GROUNDCLAMPS

I

"----__ POWERSERVICEGROUNDINGELECTRODESYSTEMINECART250,PANTH)

ELECTRICSERVICEEQUIPMENT

MAC3964

3

_ Getting Started

Welcome/Product Registration ................... 2

Safety/Precautions ..................................................... 3

Table of Contents ....................................................... 4

Features and Model Information................................ 5

_--_ On-Screen Features

PICTURE MENU
c-Adjusting Color, Brightness, Sharpness,

Tint, and Picture Controls ................................... 6

c-Using the Clearview Control............................... 7

c-Adjusting the TV's Convergence Control ........... 8

c-Using the Flesh Correction Control .................... 9

FEATURES MENU

c-Selecting a Picture Source/RF Switcher ........... l0

c-Setting the TV for Closed Captioning ............... II

c-Setting the TV for Cable or Antenna Signals .... 12

c-Adding Channels in Memory (Automatically). 13

c-Adding Channels in Memory (Manually) ......... 14

c-Setting the TV Clock ......................................... 15

c-Turn-On Timer .................................................. 16

c-Using the Sleep Timer Control ......................... 16

c-Using the Time/Channel Reminder Control...... 17

c-Using the Parental Control........................... 18-19

c-Adjusting the Channel Display Control ............ 20

c-Using the Language Control ............................. 20

SOUND MENU

c-Adjusting Bass, Treble, and Balance Sound

Controls ............................................................. 2I

,O'Settingthe Bass Boost Control ........................ 21

c-Setting the TV for Stereo and SAP Programs ..22

_'Using the Sound Image Control ........................ 23

c-Using the Volume Display Control ................... 23

C'Using the TV Speaker On/Off Control with

the Audio Outputjacks ..................................... 24

c-Surround Sound Speaker Connections and

Variable Audio Output Control ........................ 25

c-Using the TV's Audio/Video Input and

Output Jacks ............................................... 26-27

_[_ Remote Control Operation

Using the Smart Picture Control ................. 28

Using the Smart Sound Control ............................... 28

Using the Smart Surf Control and the Surf button...29

Setting the Remote to Work VCRs .................... 30-31

Setting the Remote to Work

Cable TV Converters .......................................... 32-33

Setting the Remote to Work VCRs or Cable

Converters - "Search Method". ................................ 34

Using the Remote's VCR buttons ............................ 35

[_ _] Picture-ln-Pieture (PIP)

How to Use PIP (Connections) ........................... 36-37

How to Use PIP with the TV Remote ...................... 38

Selecting the Picture Source for PIP ........................ 39

Adjusting Picture-in-Picture Color and Tint ............ 40

More PIP Connections (Cable Converter) ............... 41

I

General Information

Tips if Something Isn't Working ............................. 42

TV Help Menu ......................................................... 43

Glossary of TV Terms ............................................. 43

Index ........................................................................ 44

Factory Service Locations .................................. 45-46

Warranty .................................................................. 47

Accessories .............................................................. 48

Copyright © 1996 Philips Consumer Electronics Company. All rightsreserved.

4

First Time Set Up - automatically sets the TV for
local channels and the correct picture signal (antenna

or cable). It even helps you make the necessary con-
nections for the Picture-In-Picture (PIP) feature. See

your Set-up and Quick Use Guide for details.

Infrared Remote Control - operates your TV set
and a variety of wireless remote control VCRs and

Cable TV Converters. Select remote buttons can also
be backlighted to make them more readable in the

dark.

Standard TV broadcast (VHF/UH10 or Cable TV
(CATV) channel capability.

Closed Captioning - allows the viewer to read TV

program dialogue or voice conversations as on-screen
text.

Automatic Programming of channels - for quick
and easy selection of favorite stations available in

your area.

Picture-In-Picture (PIP) - can show a TV program

and the direct video output from an accessory (VCR,

etc.) onto the TV screen at the same time.

Stereo-Ready TV - with a built-in audio amplifier
and a twin speaker system, reception of TV programs

in both broadcast stereo sound or (SAP) bilingual
broadcast are available.

On-Screen Features - display helpful information
for the setting of TV controls (such as help messages,
operating tips and glossary).

Parental Controls - for "censoring" or blocking out
channels to keep children from watching undesirable
programming.

Audio/Video Jacks - for direct connections with

VCRs (and other accessories) for quality TV picture
and sound playback.

Surround Sound - external audio speaker connec-
tions.

Sleep-Timer - automatically turns the TV OFF at
preset time intervals.

Smart Button - for the control of TV Sound and
Picture levels. Use the Smart Button on the remote to

quickly adjust Smart Sound (to set TV Volume levels
during program changes or commercial breaks);
Smart Picture (for programmed video level adjust-
ments on a variety of program sources); and Smart
Surf (for quick one button channel selection of up to

10 of your favorite channels).

As you unpack your TV please note that the fol-
lowing items have been included with your set:

• Owner's Manual

Safety Tip Information
Factory Service Center Locations

• Warranty Registration Card

• Remote Control Transmitter

• Batteries for Remote Control Use

Please take a few minutes to complete your regis-
tration card. The serial number for the TV is on

the back of the set.

Refer to the back of this manual for instructions
on the cleaning and care of the TV.

Oadjust your TV color and

icture controls, select a TV
channel and follow the steps shown
below:

m- -arm

_ Select BRIGHTNESS, PIC-

TURE, COLOR, TINT, or

SHARPNESS picture control.

With the PICTURE MENU on
screen, move the RED highlight

A

with the MENU 4_) buttons. Then
press the MENU (M) button.

_ Press the (+) or (-) buttons to

adjust the selected control.

<_ Press the STATUS button to

clear the screen.

@

Remember. When the bar

g scale is centered, control set-

tings are at normal mid-range lev-

els.

BRIGHTNESS Press (-) or (+) until
dark parts of the picture show good

detail.

PICTURE Press (-) or (+) until
whitest parts of the picture are as
bright as you prefer.

COLOR Press (-) or (+) to add or

eliminate color.

Press (-) or (+) to obtain natu-

ral skin tones. (Also see Flesh

Correction on page 9 for more infor-

mation).

SHARPNESS Press (-) or (+) to
improve detail in the picture.

REMENU

10F2_

l

Select and then press ]] Select and then press MFNU

MILNU {M) butlon tO l] {M) button to view additional

view an explanation of controls grouped under sanv2
the se ected leature, lealure heading. ['or

Example: Tint, Brightness,
P eture, etc.

HOW TO SELECT FEATURES

(WITH BUTTONS ON THE REMOTE)

Press MENU (M) -'_
to .,.;elect RED high-'[

lighted feature, Press MENU (M)

• • to move Up
and Down within

the Menu.

Press MENU (M)_I_'

to move from Side-to-

Side within the Menu•

earview is a sharpness feature

which smoothes out back-

ground snow (or picture noise)

without losing picture image detail
or crispness.

<_ Select CLEARVIEW control.

With the PICTURE MENU on
screen, move the RED highlight

A

with the MENU _.-1, buttons. Then
press the MENU (M) button.

_ Press the MENU AV buttons

to move the RED highlight. Press
the MENU button to select (_") the

ENHANCED mode.

<_ Press the STATUS button to

I clear the screen.

@

MAIN MENU

bitnvergence is the correct lin-

tg up of the red and blue

light paths on the TV screen.
NOTE: if no color fringing (see
Smart Help) shows, then no
Convergence adjustments are nec-
essay, for your TV.

,_ Select CONVERGENCE con-

trol.

With PICTURE MENU (2 of 2) on
screen, move the RED highlight

with the MENU 4_ buttons. Then
press the MENU (M) button.

<_lf there is RED or BLUE color

I ringing on the White cross, press

the MENU button to continue.

<_ Press the MENU I_ buttons

to move the redor blue cross
directly over the white cross on the

TV screen.

The red or blue cross is properly

adjusted when it is completely
merged with the white cross. (No
color appears around the edge of
the white cross).

,_ Press the STATUS button to

clear the screen when convergence
adjustments are complete.

MAIN

<

PICTURE MENU

PICTURE MENU

20F 2_

If there is RED or BLUE

fringe on the WHITE cross,

use this adjustment to

improve the picture.

Press "M" to Continue

- or -

Press ")" to Return

Remember. Convergence

has been set at the factory for

best viewing, but if one or more of
the (red or blue) colors appear
around the edges of objects (color
fringing) follow the steps given in

this section.

T

"I

! I

'e the Flesh Correction con-
rol to keep skin tone hues (or

facial tint)from varying from TV

channel to TV channel.

r-a-ffar

1_ Select FLESH CORREC-

TION control.

With PICTURE MENU (2 of 2) on
screen, move the RED highlight

with the MENU 4o_ buttons. Then

v

press the MENU (M) button.

<_ Press the MENU &V buttons

to move the RED highlight. Press
the MENU button to turn (_) the

FLESH CORRECTION control
ON.

<_ Press the STATUS button to

clear the screen.

k, ,J

€

PICTURE MENU

_I_NVE_3ENlt _

,7": :T: [:'?,,,,

:"H FLESH CORRECTION _

20F 2_

= FLESH ) _))::!::)::_ii::.._!:i::I..... __),

"_!ii::iiliiiiiiiiiiii))iii__::::::::::::)]ii)(............ :.i:::...:

Select PICTURE SOURCE

SELECT control.

With the FEATURES MENU on
screen, move the RED highlight with

the MENU 4_), buttons. Then press
the MENU (M) button.

<_ Press the MENU AV buttons to

move the RED highlight. Press the

MENU button to turn the desired PIC-
TURE SOURCE control ON (t_).

ANTENNA- for a picture signal

coming from the ANTENNA
plug on the TV.

VCR/AUX- for a picture signal

coming from the Video Input

jack on the rear of the TV.

_.' > Press the STATUS button to clear

the ,screen.

MAIN MENU

L

FEATURE MENU

, 10F3,

Remember.
The VCR/AUX
TV screen will
be blank unless a

signal source is
connected to the

Video Input jack
on the rear of the

TV. (See page 26
for details).

n optional RF Switcher is available
that will allow an Antenna/Cable TV

signal and another video accessory

'VCR, Video Disc Player, etc.) m be

connected to the TV at the same time.

Connection instructions are given with
the accessory RF Switcher, but be sure
to turn the TV's power OFF (and

unplug its AC power cord) when con-
necting the RF Switcher to the RF
Switch Input jack on the rear of the TV.
Replag the TV'sAC Power Cord into

the wall outlet and turn the TV ON. The
TV's Picture Source Menu will now

show an Accessory Signal Source option
available for selection.

The accessory RF Switcher can be pur-
chased or ordered from your dealer. If

your dealer does not carry the accesso-
ry, call the Information Center number

'listed with your warran_. )for further

assistance.

-- MA_ MENU

F_A1UI_ MENU

o__ h_=_._ -

E:_:_:_:_:_:_:i:i:i:!:!:!:i:_:!:!i_i_!!!_i_:_:!:i:i:i:i:i:i:i:_:_:_:_:_:_:_:_:_:_:_:_:_.,"__i_:i:_i:__ __

iiiiiiiiiiiiiiii_iii!i_iii_iiii_i_iii!iiiii?iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_iiiii}_i_i_i__:

.:_!!i!i!iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!ii!iiiiiiiiiiiiiiiiiiiiiiiii::::

:.:::+=.::.:=::

-- F_AIU,q_ h_NU

i:iiiiiiiiiiiiiiiiiii

iiMUi!!iii!!iii!ii!iiii!iiiiiii

...._:_i_i_i_i_i_i_i_i_i_i_i_i_

=====================

.::::::::::::::

10

osed Captioning (CC) allows

you to read the voice content of

television programs on the TV

screen. Designed to help the hearing

impaired this feature uses on-screen

"text boxes" to show dialogue and

conversations while the TV program

is in progress.

_,_ Select CLOSED CAPTION-

ING control.

With the FEATURES MENU on

screen, move the RED highlight

with the MENU 4_ buttons. Then

press the MENU (M) button.

,,) Press the MENU AV buttons

to move the RED highlight. Press

the MENU button to select (u,") the

desired Closed Caption mode - For

Example: "ALWAYS ON" and

"CAPTION I"

CAPTION I, 2, 3, 4:

dialogue (and descriptions)
for the action on the captioned
TV program shows on-screen.
(See Important Note on this
page.)

TEXT I, 2, 3, 4:

often used for channel guide,
schedules, or bulletin board

information for CC programs.

_,_ After making your Caption mode

selection, press the STATUS button

to clear the TV screen. The selected

Closed Caption mode will be active.
To cancel, set the Closed Captioned

feature to OFF when finished view-
ing.

Remember. Broadcast

t stations will often use

spelling abbreviations, symbols,
dropouts and other grammatical
shortcuts in order to keep pace

with the on-screen action. These
type factors vary upon the source

of the captioned text material and
do not indicate a need for service

on the part of the TV.

NOTE: Not all TV programs and product commercials are made for broadcast
with Closed Caption (CC) information included. Neither are all Closed Caption
modes (CAPTION I-4; or TEXT I-4) necessarily being used by a broadcast station
during the transmission of a closed caption program. Usually "CAPTION I" is the
most used mode to view captioned material. Refer to your area's TV program list-
ings for the stations and times of Closed Caption shows.

........!

MAiN MENU" :!!ilili!!!ii!i!i!i!i!i!!i!!:iii!i!iiiiiiiiiiiiiiiiiil

i !i !!ili iiiii!iiii!iiiiiiiii!iiiiiiii

Illl I

"1_ _ 1 no'n-:'r_ on Dt

I_1 I_1 MUTEOnl,vc,,,,tro,ca,,

! _ _ _ bc used to set thc'l tu

_/_1 _s SWAP ntelZt turn the Closed Caption

mode "ON" whenc

llmllll_:!_+++_:.:."m:?__+:_._:!_.:_lml I iiiiiiiiiMUTI- button on It

888 +++

:::::i:+++:-:i+i+;++++i+;;+

iiiiiiiiiiii!iii!?i!i!ii++"::

:jJjSjJjJ::

FEATURE MENU

1 OF 3_

:. ,:: i..11::

[_] ALWAYS ON [

ALWAYS OFF

onouR,nsMute0n_Y

r_l_ !-I text 1
I I cAptiON a I I text

I IcApTI0n3 I I text3

I I CApTION 4 I I TExt 4

0

Closed Captitm inlornmtion will usually appear

in black and white (although some broadcaslers
or networks may t_casionally use color to
light or draw attention to certain areas.)

This symbol will appear on channels that con-

lain Closed Captioning material whenever the
slalus display is shown.

I

CAFq'ION I mode

Example Screen Display

:....

FUI.L SCREEN TEXT

will block TV screen from viewing

12:00

11

OiTE." If you went through

rst Time Setup (in your

Quick Use Guide), this task has
already been completed for you.

You need to make sure the TV is

set to pick up either Cable TV or
Antenna signals, in other words,
the 77/needs to know if you con-

nected a Cable TV signal or a nor-
mal antenna to its ANTENNA plug.

<_ Select CABLE CHANNEL

TUNING control.

With the FEATURES MENU on
screen, move the RED highlight

with the MENU 4_1_ buttons.
Then press the MENU (M) button.

<_ Press the MENU AV buttons

to move the RED highlight. Press
the MENU button to select (_") the

desired mode - For Example:
CABLE.

CABLE- If you DO have

Cable TV connected

to the TV. Channels

1-125 are available.

NORMAL- If you have an

Antenna connected

to the TV. Channels
2-69 are available.

<_ Press the STATUS button to

clear the screen.

MAIN MENU

, o 0 E iiiiii?:

FEATURE MENU

10F3_

12

OiTE: If you went through First

me Setup (in your Quick Use

Guide), this task has already been
completed for you.

Your TV can automatically set itself

for local area (or Cable TV) chan-

nels. This makes it easy for you to
select only the TV stations in your

area when the CHANNEL • • but-

tons are pressed.

1_ Select CHANNEL MEMORY

(START AUTO-PROGRAM-

MING) control.

With the FEATURES MENU on

screen, movethe RED highlight with
the MENU 4_) buttons. Then press
the MENU (M) button.

_ Press the MENU button to turn

AUTO-PROGRAMMING ON.

The TV shows which channel num-
bers are "SAVED" (t,,') as they are
added into memory.

"Auto-programming CHANNEL
MEMORY is finished" shows when

the TV is through adding channels.

_ Press the STATUS or Menu (M)

I button to clear the screen.

@

Try it out. Press the

CHANNEL•• buttons and

see which channels you can select.

Remember. An Antenna or Cable TV
signal must first be connected to your

TV so that channels can be saved.

If you want to delete any unwanted
channels from the TV's memory, see

"ADD/DELETE CHANNELS" on
page 14.

MAIN MENU

FEATURE MENU

13

uto-Programming (see page 13)
adds all the channels it can find

(on your Antenna or Cable TV sys-

tem) into the TV_ memory.
Add/Delete Channels makes it easy

for you to add other channels, or

drop unwanted channels, from the
list of channels in the TV's memory.

@;;'Select CHANNEL MEMORY

(ADD/I)ELETE CHANNELS)
control.

With the FEATURES MENU on
screen, move the RED hi!2hlight

with the MENU t_) buttons. Then
press the MENU (M) button.

<_ Press the CHANNEL &V or

I umber buttons to ,select the chan-

nel you want to add or delete.

<_ Press the MENU 1_ button to

ADD the channel into the TV's

memo_.

Press the MENU • button to
DELETE the channel from memory.

Repeat steps 2 and 3 for each chan-
nel you wish to add or delete.

;;,Press the STATUS or MENU

I button to clear the screen.

Remember. You can also

add the VCR/AUX mode

just like a channel. Then by

pressing the CHANNEL 4,V
buttons the VCR/AUX mode can

quickly be selected to use the
Input jacks on the rear of the TV
(see page 26).

Note: "VCR/AUX" mode is
located between the lowest and

highest channel numbers within

the,ADD/DELETE CHANNEL
control screen.

MAIN MENU

........!_i_!iiiiiiiiiiiiiiiiiiii:iiiiiiiiiiiiiiiiii

FEATURE MENU

10F3_

CHANNEL MEMORY

5_,

Channel 19 Added

i S_LECI" CHANNEL

(_D to D_LE'TECHANNEL

(_en FINISHED

14

If you went through

First Time Setup (in your
Quick Use Guide), this task has
already been completed for you.

Your TV comes with an on-screen
clock. During normal operation the
clock appears on the screen with

every channel change (and when

the STATUS button is pressed).

1_ Select SET CLOCK control.

With FEATURES MENU (2 of 3)

on screen, move the RED highlight
with the MENU 4_ buttons. Then

press the MENU (M) button.

<_ Press the remote's number

buttons to set the time clock.

<_ Press the STATUS button to

I set the clock in operation and clear

the screen.

Remember, be sure to

press "0" first and then the

hour number for single digit
entries.

The remote's MENU 4_ buttons
can also be used to set the hours,
minutes and AM/PM portions of

the clock.

TV Clock settings may be lost

when the TV is unplugged (or AC
power to the set is interrupted.)

You can also set the TV Clock

automatically if you follow the First

Time Set-up procedure for the

Smart Clock feature.

..:_::::_:_:!:...:.

•:i_::::):::_:_:!:!:_

MA,NMENU .....:::::::=:::::i_i_l

,i,i *\_

PIP

FEATURE MENU

,\,l,I,

FEATURE MENU,

, Ii I , / _

20F 3_

SET CLOCK & ON TIMER

_S_TON_M_R_

rm

PLEASE ENTER THE

CURRENT HOUR

15