How it Works
Magnavox
Loading...
19MDTR20
User Manual
80 pgs2.36 Mb0

Magnavox 19MDTR20 User Manual

O
WNER’S MANUAL
NEED HELP?CALL US!
M
AGNAVOX REPRESENTATIVES ARE READY TO HELP YOU WITH ANY
QUESTIONS ABOUT YOUR NEW PRODUCT
.WE CAN GUIDE YOU THROUGH
ONNECTIONS,FIRST
-TIME SETUP, AND ANY OF THE FEATURES.
W
E WANT YOU TO START ENJOYING YOUR NEW PRODUCT RIGHT AWAY.
C
ALL US BEFORE YOU CONSIDER RETURNING THE PRODUCT.
1-800-705-2000
OR VISIT US ON THE WEB AT WWW.MAGNAVOX.COM
19MDTR20/27MDTR20
COLOR TV
WITH BUILT-IN VCR
AND DVD P
LAYER
IMPORTANT!
R
ETURN YOUR WARRANTY REGISTRATION CARD WITHIN 10 DAYS.
SEE WHY INSIDE.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 1
Once your MAGNAVOX purchase is registered, you’re eligible to receive all the privileges of own­ing a MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits.
Return your Warranty Registration card today to
ensure you receive all the
benefits
you’re entitled to.
For Customer Use
Enter below the Serial No. which is located on the rear of the cabinet. Retain this infor­mation for future reference.
Model No.________________ Serial No. ________________
Congratulations on your purchase, and welcome to the “family!”
Dear MAGNAVOX product owner:
Thank you for your confidence in MAGNAVOX. You’ve selected one of the best-built, best-backed products available today. And we’ll do everything in our power to keep you happy with your purchase for many years to come. As a member of the MAGNAVOX “family,” you’re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry. What’s more, your purchase guarantees you’ll receive all the information and special offers for which you qualify, plus easy access to accessories from our convenient home shopping network. And most importantly you can count on our uncompromising commitment to your total satisfaction. All of this is our way of saying welcome-and thanks for investing in a MAGNAVOX product.
P.S. Remember, to get the most from your
MAGNAVOX product, you must return your Warranty Registration Card within 10 days. So please mail it to us right now!
Know these
safetysymbols
This “bolt of lightning” indi-
cates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering.
The “exclamation point”
calls attention to features for which you should read the enclosed literature closely to prevent operating and mainte­nance problems.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
CAUTION: To prevent elec­tric shock, match wide blade of plug to wide slot, fully insert.
ATTENTION: Pour éviter les choc électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu’au fond.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
R
E
G
I
S
T
R
A
T
I
O
N
N
E
E
D
E
D
W
I
T
H
I
N
1
0
D
A
Y
S
Hurry!
Warranty Verification
Registering your product within 10 days confirms your right to maximum protection under the terms and conditions of your MAGNAVOX warranty.
Owner Confirmation
Your completed Warranty Registration Card serves as verification of ownership in the event of product theft or loss.
Model Registration
Returning your Warranty Registration Card right away guarantees you’ll receive all the information and special offers which you qualify for as the owner of your model.
Visit our World Wide Web Site at http://www.magnavox.com
19MDTR20(1-49).QX33 03.3.28 11:52 Page 2
Safety Precautions
Warning: To prevent fire or shock hazard, do not expose this equipment to rain or moisture.
Federal Communications Commission (FCC) Warning: Any unauthorized changes or
modifications to this equipment void the user’s authority to operate it.
Laser Safety: This unit employs a laser. Only a qualified service person should remove the cover or
attempt to service this device, due to possible eye injury.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM. THE BEAM IS LOCATED INSIDE, NEAR THE DECK MECHANISM.
Special Information for Canadian Users: This Class B digital apparatus complies with Canadian
ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Radio/TV Interference: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and the receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
Copyright Protection: Unauthorized copying, broadcasting, public performance and lending of Discs
are prohibited. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Note to the Cable TV System Installer: This reminder calls the Cable TV system installer’s
attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper grounding – in particular, specifying that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as possible.
Declaration of Conformity
Model Number: 19MDTR20/27MDTR20 Trade Name: Magnavox Responsible Party: Philips Consumer Electronics
P.O. Box 14810 Knoxville, TN 37914-1810 (865) 521-4316
Safety and General Information 3
As an ENERGY STAR®Partner, Magnavox has determined that this product meets the ENERGY STAR®guidelines for ener­gy efficiency. E
NERGY STAR
®
is a U.S. registered mark. Using products with the ENERGY STAR®label can save energy.
Saving energy reduces air pollution and lowers utility bills. Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Copyright 2003 Magnavox. All rights reserved.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 3
4 Table of Contents
General Information
Safety and General Information . . . . . . . . . . . . . . . .3
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . .4
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Playable Discs and Videotapes . . . . . . . . . . . . . . . . .6
First-Time Setup and Use
Before Using the TV/VCR/DVD . . . . . . . . . . . . . . .7
Hooking Up the TV/VCR/DVD . . . . . . . . . . . . . .8-9
Optional Connections . . . . . . . . . . . . . . . . . . . . . .10
First-Time Setup, Watching TV . . . . . . . . . . . . . . .11
Playing a Videotape . . . . . . . . . . . . . . . . . . . . . . . .12
Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Description of Controls
Remote Control Buttons . . . . . . . . . . . . . . . . .14-15
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
TV Settings
Menu Language, ResettingTV Channels . . . . . . . . .18
Adding/Deleting Channels . . . . . . . . . . . . . . . . . . .19
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . .20-23
Daylight-Savings Time . . . . . . . . . . . . . . . . . . . . . .24
Status Displays, Picture Controls . . . . . . . . . . . . .25
Recording
Videotape Recording . . . . . . . . . . . . . . . . . . . . . . .26
One-Touch Recording . . . . . . . . . . . . . . . . . . . . .27
Timer Recording . . . . . . . . . . . . . . . . . . . . . . .28-31
Timer Recording Auto Return . . . . . . . . . . . . . . .32
Rerecording (Tape Duplication) . . . . . . . . . . . . . .33
Videotape Features
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Rental Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Zero Return, Sleep Timer . . . . . . . . . . . . . . . . . .36
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Index Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Videotape Playback Features . . . . . . . . . . . . . . . . .39
Automatic Operation Features . . . . . . . . . . . . . .40
Additional TV Features
Closed Captions . . . . . . . . . . . . . . . . . . . . . . . . . .41
Setting V-Chip . . . . . . . . . . . . . . . . . . . . . . . . .42-47
Multi-Channel Television Sound . . . . . . . . . . . .48-50
Disc Features
Disc Menus, Title Menus . . . . . . . . . . . . . . . . . .51
Fast Forward/Reverse Search . . . . . . . . . . . . . . .52
Title/Chapter Playback, Time Playback . . . . . . . .53
Track Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Paused and Step-by-Step Play,
Resume On . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Repeat Play, A-B Repeat Play . . . . . . . . . . . . . . .56
Markers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Subtitles, Camera Angles . . . . . . . . . . . . . . . . . .58
Slow Motion, Zoom . . . . . . . . . . . . . . . . . . . . . .59
Parental Password . . . . . . . . . . . . . . . . . . . . .60-61
Parental Levels . . . . . . . . . . . . . . . . . . . . . . .62-63
Audio Language, Stereo Sound . . . . . . . . . . . . . .64
Random Play, Programmed Play . . . . . . . . . . . . .65
MP3/JPEG Playback . . . . . . . . . . . . . . . . . . . . . .66
MP3/JPEG Displays . . . . . . . . . . . . . . . . . . . . . . .67
DVD Setup Features
Language Settings . . . . . . . . . . . . . . . . . . . . . .68-69
Display Settings . . . . . . . . . . . . . . . . . . . . . . .70-71
Audio Settings . . . . . . . . . . . . . . . . . . . . . . . . . . .72
On-Screen Displays . . . . . . . . . . . . . . . . . . . . . .73
Black Level, Virtual Surround . . . . . . . . . . . . . . .74
Information You May Need
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Helpful Hints . . . . . . . . . . . . . . . . . . . . . . . . . .76-77
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . .79
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
19MDTR20(1-49).QX33 03.3.28 11:52 Page 4
Introduction 5
• Automatic Channel Setup
• Automatic Head Cleaner
• Automatic Tracking Adjustment
• Closed Captions
• Daylight-Savings Time
• English, Spanish, or French Setup Menus
• Forward/Reverse Searching; Still
• High Quality (HQ) System
• Index Search
• One-Touch Recording
• Real-Time Videotape Counter
• Rental Play
• Repeat Play
• Sleep Timer
• Time Search
• Timer Recording
• V-Chip (Parental Controls)
• Zero Return
Welcome to your TV/VCR/DVD owner’s manual.
This manual describes the 19MDTR20 and 27MDTR20. These two models are different sizes, but they operate identically. The 27MDTR20 is illustrated in this manual.
Features - TV/VCR
• Audio Language choices*
• Bit Rate display
• Camera Angle*
• Dolby Digital Sound*
• Dynamic Range Control
• Fast/Paused/Slow/Step-by-Step Playback
• Markers
• Parental Controls*
• Programmed Play
(Audio CD, MP3)
• Random Play (Audio CD, MP3)
• Repeat (A-B, Chapter, Title, Track, Disc)
• Search (Title/Chapter, Time, Track)
• Subtitles*
• Virtual Surround
• Zoomed Play
* If available on the Disc
DVD Disc Menus...
Some explanations in this manual describe DVD Disc menus. DVD manufacturers set the menus, which vary among DVDs. All DVDs do not have menus. If the DVD has a menu, access it by pressing the DISC MENU button on the remote control.
Details are on page 51.
Setup Menus...
Some instructions explain how to use the setup menus of the TV/VCR/DVD. There are two setup menus: one for the TV/VCR features while the unit is in TV/VCR mode, and one for the Disc features while the unit is in DVD mode. Access the setup menus by pressing SETUP on the remote control. While in TV/VCR mode, you can select only the TV/VCR SETUP menu. In DVD mode, you can select both the TV/VCR SETUP menu and the SETUP menu for the unit’s DVD Player. Press the SETUP button once to select the TV/VCR SETUP menu. Press SETUP twice to get to the DVD Player’s SETUP menu. Even if you set a DVD feature in the unit’s SETUP menu, it will not be available if the current Disc does not include that feature.
Available Disc Features...
All features described in this manual are not available on every Disc. If the feature is not available on the Disc, you cannot use the TV/VCR/DVD to make it available. An “X” will appear in the top right corner of the screen if you try to access a feature that is not available. For example, some features are available only during play, while others are available only if play is stopped. If you cannot access a feature, try stopping or starting play, then try the feature again.
Features - Discs
19MDTR20(1-49).QX33 03.3.28 11:52 Page 5
6 Playable Discs and Videotapes
Region Codes
This TV/VCR/DVD has a Region One (1) DVD Player. DVDs must be labeled for ALL regions or for Region 1 in order to play on the unit. You cannot play DVDs that are labeled for other regions. Look for the symbols below on your DVDs. If these region symbols do not appear on your DVD, you cannot play the DVD in this TV/VCR/DVD.
The number inside the globe refers to a region of the world. Region 1 represents the United States, Canada, upper regions of North America, Bermuda, the U.S. Virgin Islands, and small regions near Australia. A DVD labelled for a specific region can only play on DVD Players with the same region code.
Color Systems
DVDs are recorded in different color systems throughout the world. The most com­mon color systems are NTSC (which is used primarily in the United States and North America), PAL, and SECAM. The DVD Player of this unit uses NTSC, so DVDs you play must be recorded in the NTSC color system. You cannot play DVDs recorded in other formats. The color system of the DVD may be listed on the DVD or on the Disc case.
Videotapes
Magnavox recommends you use only videotapes that have the mark. Other videotapes may have poor picture quality and cause excessive deposits on the video heads. The warranty may not cover such damage. The VCR of this TV/VCR/DVD has a High Quality (HQ) system and is compatible with existing Video Home System (VHS) equipment.
Playable Discs
The DVD Player of this TV/VCR/DVD will play many types of Discs, including Digital Video Discs (DVDs) and Audio Compact Discs (CDs). It will play MP3 and JPEG files as well. To play a DVD, make sure it meets the requirements for Region Codes and Color Systems as described below. Discs that have the following logos will play on the DVD Player of this TV/VCR/DVD. Finalize CD-R, CD-RW, DVD+R, and DVD+RW Discs before playing them in the TV/VCR/DVD.
DVD: Prerecorded Digital Video Discs
Audio CDs
MP3: Digital audio files recorded on a CD-R or CD-RW
CD-RW: Compact Disc Rewritable. CD-RWs can be recorded on multiple times.
CD-R: Compact Disc Recordable. CD-Rs can be recorded on only once.
DVD+R: DVD Recordable. DVD+Rs can be recorded on only once.
DVD+RW: DVD Rewritable. DVD+RWs can be recorded on multiple times.
Recordable
ReWritable
19MDTR20(1-49).QX33 03.3.28 11:52 Page 6
Before Using the TV/VCR/DVD 7
1 2
1 2
3
Remote Control Battery Installation
1
Remove the battery compartment lid on the bottom of the remote control. Slide the lid down and off. Follow the direction of the arrow on the lid.
2
Place two AA batteries inside the battery com­partment. Align the +and –ends as indicated.
3
Replace the battery compartment lid.
Battery Safety
Battery Usage CAUTION - To prevent battery leakage that may result in bodily injury, property damage, or damage to the unit:
● Install ALL batteries correctly, with the + and - markings
on the battery aligned as indicated on the unit;
● Do not mix batteries, for example, old with new or carbon
with alkaline; and
● Remove batteries when the unit will not be used for a long
time.
Recording Prevention
Videotapes have record tabs to ensure you do not erase recordings accidentally.
1
To prevent accidental recording, break off the tab with a screwdriver.
2
To record again, cover the hole with cello­phane tape.
Using the Remote Control
● Point the remote control at the remote sensor on the
front of the TV/VCR/DVD. Details are on page 16.
● Do not put objects between the remote control and the
TV/VCR/DVD.
TV/VCR/DVD Maintenance
● Remove any light adhesive stick-on notes from the video
cassette before putting the cassette in the TV/VCR/DVD. Removable labels can jam the TV/VCR/DVD.
● The TV/VCR/DVD requires periodic maintenance to main-
tain its excellent performance. This TV/VCR/DVD has an internal head cleaning system. However, the video heads will eventually require cleaning or replacement. Only an authorized service center should perform this service.
• Your new product, its packaging, and this manual contain materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount that needs to be properly disposed. Your product uses batteries that should not be thrown away when depleted but should be disposed of as small chemical waste. Please find out about the local regulations on disposal of your old product, batteries, manual, and packaging when you replace exist­ing equipment.
Helpful Hint
19MDTR20(1-49).QX33 03.3.28 11:52 Page 7
8 Hooking Up the TV/VCR/DVD
ANT.
L
AUDIO OUT
R
COAXIAL
ANT.
IN
OUT
ANT.
L
AUDIO OUT
R
COAXIAL
ANT.
Connect an RF coaxial cable (not supplied) to the OUT Jack on the Cable Box/ Satellite Receiver and to the ANT(enna) Jack on the TV/VCR/DVD.
Connect a Cable TV signal or an antenna to the ANT(enna) Jack.
1
Hook up your TV/VCR/DVD using one of the connections shown.
A
Hooking Up Your TV/VCR/DVD with a Cable TV Signal or Outdoor Antenna
Connect the Cable TV or Satellite signal to the IN Jack on the Cable Box/Satellite Receiver.
B
Hooking Up Your TV/VCR/DVD with a Cable Box/Satellite Receiver
To view any channel, set the TV/VCR/DVD to the output channel (channel 03 or 04) of the Cable Box/Satellite Receiver. Then, select chan­nels at the Cable Box/Satellite Receiver.
Your Cable Box/Satellite Receiver may have Audio and Video Out jacks instead of the single Antenna Out jack (RF coaxial or 75 ohm) shown here. If so, connect Audio and Video cables to the Audio/Video Out jacks of the Cable Box/Satellite Receiver and to the AUDIO/VIDEO In jacks on the front of the TV/VCR/DVD. Press SELECT on the remote to set the TV/VCR/DVD to AUX, not channel 3 or 4. Select chan­nels you want to watch or record at the Cable Box/Satellite Receiver as usual, leaving the TV/VCR/DVD on AUX.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 8
Hooking Up the TV/VCR/DVD (cont’d) 9
RL
AUDIOVIDEOHEADPHONE
STANDBY-ON
SEARCH
NEXTPREV
PLAY
F.FWDREW
PLAYSTOP
OPEN/CLOSE
REC/OTR
STOP/EJECT
VOLUME
D V D
D V D TV/VCR
SELECT
V C R
CHANNEL
OUT
IN
VIDEO
IN
OUT
3CH 4CH
AUDIO
ANT.
OUT
IN
VIDEO
IN
OUT
3CH 4CH
ANT.
RL
AUDIOVIDEOHEADPHONE
AUDIO
L R
L R
AUDIO/VIDEO In
Jacks on front of
TV/VCR/DVD
AUDIO/VIDEO OUT
Jacks on VCR
(example only)
Connect audio cables to the AUDIO OUT Jacks on the VCR and to the red and white AUDIO In Jacks on the front of the TV/VCR/DVD.
Connect a Video cable to the VIDEO OUT Jack on the VCR and to the yellow VIDEO In Jack on the front of the TV/VCR/DVD.
2
When all other connections are complete, plug in the TV/VCR/DVD’s power cord.
3
Before you turn on the TV/VCR/DVD, go to page 11.
ANT.
L
AUDIO OUT
R
COAXIAL
ANT.
Indoor Antenna
(not supplied,
example only)
D
Hooking Up Your TV/VCR/DVD to Another Video Source (VCR, DVD Player, Camcorder, etc.)
You may need this connection if you want to play Discs or tapes on other equipment but watch them on the TV/VCR/DVD. Press SELECT on the remote to select AUX at the TV/VCR/DVD. When you play the materials on the other equipment, it will show on the TV/VCR/DVD’s AUX channel. More details are
on page 33.
Audio and video cables are not supplied.
C
Hooking Up Your TV/VCR/DVD with an Indoor Antenna
To install an indoor antenna or “rabbit ears” (not supplied), connect the antenna wire to the ANT(enna) Jack on the back of the TV/VCR/DVD as shown. Extend the antenna and adjust its length, direction, and angle for the clearest picture.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 9
ANT.
L
AUDIO OUT
R
COAXIAL
L
AUDIO OUT
R
COAXIAL
10 Optional Connections
• You cannot use a Mini-Disc or Digital Audio Tape deck to copy
5.1 channel Dolby Digital sur­round sound Discs.
• Discs recorded in Dolby Digital should show this on the Disc or case. If the Disc is not recorded in 5.1 channel Dolby Digital sur­round sound, you will not hear multi-channel sound even if you use the Digital Stereo hookup.
Helpful Hints
Analog Stereo Hookups
If you want to hear the TV/VCR/DVD sound through a stereo instead, make this connection.
1
Complete the antenna/Cable TV connections. Details are on pages eight-
nine.
2
Connect red and white audio cables to the red and white AUDIO OUT jacks on the back of the TV/VCR/DVD and to the AUDIO IN jacks on the stereo. Match the
cable colors to the jack colors. Audio cables are not supplied. Use RCA-style cables.
3
Set your stereo to Auxiliary In or the correct “Source” mode. See
your stereo owner’s manual for details.
ANT.
L
AUDIO OUT
R
COAXIAL
L
AUDIO OUT
R
COAXIAL
Digital Stereo Hookups
You can connect the TV/VCR/DVD to a Stereo that has a Digital Coaxial In jack. Use this hookup if you want to hear the TV/VCR/DVD sound through the Stereo instead. Use these connections for a Dolby Digital-compatible Stereo or for a Receiver that has a Mini-Disc or Digital Audio Tape deck.
1
Connect the antenna/Cable TV signal. Details are on pages eight-nine.
2
Connect a digital audio coaxial cable (not supplied) to the orange COAXIAL jack on the TV/VCR/DVD. Also connect the cable to the Stereo’s COAXIAL DIGITAL AUDIO IN jack.
3
If the Stereo is Dolby Digital-com­patible, set DOLBY DIGITAL to ON. If the Stereo is not Dolby Digital-
compatible or if you connected to a Mini-Disc or Digital Audio Tape Deck, set DOLBY DIGITAL to OFF. Details are
on page 72.
An incorrect setting causes noise distor­tion and damages speakers. To see if your Stereo has Dolby Digital, look for a Dolby Digital logo on your Stereo. Or, refer to the Stereo owner’s manual.
Audio cables
to red and white AUDIO OUT jacks on TV/VCR/DVD
Audio cables to
Stereo’s AUDIO IN jacks
To orange
COAXIAL jack
on TV/VCR/DVD
To Stereo’s COAXIAL
DIGITAL AUDIO IN jack
19MDTR20(1-49).QX33 03.3.28 11:52 Page 10
First-Time Setup, Watching TV 11
The TV/VCR/DVD can memorize available TV channels. If you are using a Cable Box or Satellite Receiver, you do not need to set channels at the TV/VCR/DVD. Set the TV/VCR/DVD to the output channel of the Cable Box or Satellite Receiver (channel 03 or 04 or AUX). Then select channels at the Cable Box or Satellite Receiver. These screens appear only the first time you turn on the TV/VCR/DVD.
1
Press STANDBY-ON to turn on the TV/VCR/DVD.
2
Press ENTER to select ENGLISH (ENG), ESPANOL (ESP), or FRANCAIS (FRA).
The selected language will appear inside the [ ]. This will be the language of the TV/VCR/DVD setup menus.
3
Press ▲ or ▼ to select AUTO PRESET. Then press ENTER. The TV/VCR/DVD scans and
memorizes available channels. When scanning is complete, the TV/VCR/DVD will go to the lowest available channel. Or, to stop the chan­nel scanning, press SETUP.
4
To watch TV, press the CH. ▲/▼ buttons to select memorized channels. Memorized channels are those that appear when you flip through channels. If a channel is skipped, you still can use the Number but­tons to select it. This is a non-memorized channel; it may have weak reception in your area. Remember, if you are using a Cable Box/Satellite Receiver, set the TV/VCR/DVD to channel 3, 4, or AUX. Change channels at the Cable Box/Satellite Receiver.
5
Press VOL. ▲/▼ to adjust the volume.
VOLUME 20
– SETUP –
LANGUAGE [ENGLISH] ESP FRA
AUTO PRESET
B
– SETUP –
LANGUAGE [ENGLISH] ESP FRA
AUTO PRESET
B
• If the power fails, you may need to repeat this first-time setup.
• The first-time setup menus only appear the first time you turn on the TV/VCR/DVD.To set up chan­nels or change the menu lan­guage later, see page 18.
• To select channels above 99, press the +100/+10 button, then press the Number buttons for the last two digits. For example, to select channel 125, press +100/+10, 2, 5. Precede single­digit channel numbers with a zero (for example, 01...09).
• If you do not want to set up the language and channels now, press the SETUP button on the remote to remove the menus. See page 18 later to set the menu language and TV channels.
Helpful Hints
2-3
1
4 5
19MDTR20(1-49).QX33 03.3.28 11:52 Page 11
STANDBY-ON
PICTURE SELECTSLEEP
123
456
789
0 +10
SPEED C.RESET
RECORD
DISPLAY
CLEAR
MODE
ZOOM
PLAY
STOP
ENTER
REPEATSEARCH MODE
+100
CH.
VOL.
MUTE
DISC
MENU
RETURNTITLESETUP
REPEAT
A
ANGLESUBTITLEAUDIO
-
B
12 Playing a Videotape
• If the tape you want to play is already in the TV/VCR/DVD, turn on the power. Press SELECT to choose TV/VCR mode (the red VCR/TV light will be on), then press PLAY B.
• When you play an S-VHS format tape, you cannot get the high resolution that would be avail­able on an S-VHS VCR. Noise lines (black and white streaks) may appear in the picture.
• If you press SELECT while play­ing a videotape, play will stop and the unit will switch to DVD mode.This will happen also if you press PLAY B(DVD) or OPEN/CLOSEA (DVD) on the front of the TV/VCR/DVD during videotape playback.
Helpful Hints
Follow these steps to simply play a videotape. Videotape play­back options are on pages 34-40.
1
Insert a videotape in the cassette compartment of the TV/VCR/DVD. The power will come on. If
the tape’s record tab is missing, play should start auto­matically.
2
If play does not start automatically, press PLAY B to start play.
3
Press STOP C to stop play.
4
Press j / h to rewind the tape.
5
When the tape finishes rewinding, press STOP/EJECT on the front of the TV/VCR/DVD to remove the tape.
PLAY
STOP
ENTER
RECORD
DISC
MENU
RETURNTITLESETUP
A
-
B
REPEATSEARCH MODE
CLEAR
MODE
ANGLESUBTITLEAUDIO
DISPLAY
SPEED C.RESET
STANDBY-ON
PICTURE SELECTSLEEP
CH.
VOL.
MUTE
ZOOM
123
456
789
0 +10
+100
REPEAT
4
2 3
19MDTR20(1-49).QX33 03.3.28 11:52 Page 12
Playing a Disc 13
• If you turn off the unit in DVD mode, when you turn it on again, it will be in TV/VCR mode.
• An ‘’X” will appear on the screen when you try to access a feature that is not available.This is not a problem with the TV/VCR/DVD.
• If a Disc is dirty or scratched, the picture may be distorted or play may stop. Remove the Disc and try a different one.
• Press OPEN/CLOSE A (DVD) or PLAY B(DVD) on the front of the TV/VCR/DVD when the power is off.This turns on the unit in DVD mode (not TV/VCR mode).
• If a Disc has multiple layers, the picture may freeze occasionally. This happens when the first layer switches to the second layer.This is not a malfunction.
• Pressing SELECT during Disc play stops Disc play and switches the unit to TV/VCR mode. Pressing PLAY B(VCR) on the front of the unit during Disc play stops Disc play and starts tape play.
Helpful Hints
Before you begin, turn on the power of other equipment con­nected to the TV/VCR/DVD. Set a stereo (if applicable) to the correct sound source or channel. Details are on page 10.
1
Press STANDBY-ON to turn on the TV/VCR/DVD. The unit will be in TV/VCR mode.
The red VCR/TV light will be on.
2
Press SELECT to put the TV/VCR/DVD in DVD mode. The green DVD light will appear on the front
of the TV/VCR/DVD.
3
Press OPEN/CLOSE A on the front of the TV/VCR/DVD to open the Disc tray.
4
Place a Disc into the tray.
Some DVDs are recorded on both sides. Make sure the label of the side you want to play is facing up. Or, if the DVD is recorded on only one side, place the Disc in the tray with the label facing up and the shiny side facing down.
5
Press PLAY B. The tray will close and play will begin. If play does not start, press PLAY B again. Or, you can press OPEN/CLOSE A or press the tray toward the unit to close the tray. If a DVD Disc menu appears instead, see page 51. For MP3 and JPEG details, see page 66.
6
Press STOP C to stop play. If play remains stopped for five minutes, the DVD screen will dim. If play is stopped for 20 minutes with no activity at the TV/VCR/DVD, the unit will turn off.
Remember, only certain Discs will play.
See page six for details.
1
5 6
2
3
Press OPEN/CLOSE A on the front of the TV/VCR/DVD.
4
Insert a Disc.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 13
STANDBY-ON
PICTURE SELECTSLEEP
123
456
789
SPEED C.RESET
RECORD
DISPLAY
CLEAR
MODE
+100
0 +10
ZOOM
PLAY
STOP
ENTER
REPEATSEARCH MODE
CH.
VOL.
MUTE
DISC
MENU
RETURNTITLESETUP
REPEAT
A
ANGLESUBTITLEAUDIO
-
B
14 Remote Control Buttons
PLAY
STOP
ENTER
RECORD
DISC
MENU
RETURNTITLESETUP
A
-
B
REPEATSEARCH MODE
CLEAR
MODE
ANGLESUBTITLEAUDIO
DISPLAY
SPEED C.RESET
STANDBY-ON
PICTURE SELECTSLEEP
CH.
VOL.
MUTE
ZOOM
123
456
789
0 +10
+100
REPEAT
PICTURE Button
Press to access the picture controls.
Details are on page 25.
STANDBY-ON Button
Press to turn on or off the TV/VCR/DVD.
Number Buttons TV Mode: Press two digits to
access a specific channel. Press 0 before the number of a single-digit channel. Details are on page 11. +100/+10 button: To select channels 100 or higher, press +100/+10, then the Number buttons of the last two digits of the channel number. DVD Mode: Use the Number buttons to enter a Track or Chapter number. +100/+10 button: Press before entering double-digit numbers. For example, to select Chapter 16, press +100/+10, then 1, 6.
k (pause) Button
Press to pause videotape recording. Press again to resume recording. Details are on page 26. Press to pause videotape or DVD playback. Press repeatedly to advance the picture one frame at a time. Details are on pages 39 and 55.
RECORD Button
Press once to start a recording on videotape. Details are on page 26.
DISPLAY Button TV/VCR Mode: Press to see the
videotape counter, channel, or time on the screen. Details are on page
25.
DVD Mode: Press to see the Disc status on the screen. Details are on
page 73.
TITLE Button
Press to access a DVD’s Title menu if available. Details are on page 51.
SLEEP Button
Press to set the Sleep Timer.
Details are on page 36.
SELECT Button
Press to choose TV/VCR or DVD mode. The corresponding light will appear on the front of the TV/VCR/DVD to indicate which mode is active. Details are on page
16.
PLAY B Button
Press to start playing a Disc or video cassette. Details are on pages
12-13.
G / g Button During Disc playback, press briefly to skip to the next Track or Chapter. Details are on page 54. Or, press and hold for two seconds to search forward during Disc playback. Details are on page 52. Press to forward a videotape.
Details are on page 39.
STOP C Button
Press to stop Disc or videotape playback.
Arrow Buttons
Use the Arrow buttons to select or adjust menu items.
RETURN Button
Press to go to the previous Setup menu in DVD mode. Press to remove some menus or displays.
REPEAT Button
Press to play a Disc, Title, Chapter, or Track repeatedly. Details are on
page 56.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 14
Remote Control Buttons (cont’d) 15
PLAY
STOP
ENTER
RECORD
DISC
MENU
RETURNTITLESETUP
A
-
B
REPEATSEARCH MODE
CLEAR
MODE
ANGLESUBTITLEAUDIO
DISPLAY
SPEED C.RESET
STANDBY-ON
PICTURE SELECTSLEEP
CH.
VOL.
MUTE
ZOOM
123
456
789
0 +10
+100
REPEAT
ZOOM Button
Press to enlarge the picture during DVD playback. Details are on page
59.
C.RESET (counter reset) Button
Press to reset the tape counter to 0:00:00. Details are on page 36. Press to cancel a timer recording.
Details are on page 31.
SPEED Button
Press to choose a tape recording speed (SP or SLP). Details are on
page 26.
j / h Button During Disc play, press briefly to skip to the beginning of the current Track/Chapter. Press repeatedly to skip to previous Tracks/Chapters.
Details are on page 54.
Or, press and hold for two seconds to search backward during Disc playback. Details are on page 52. Press to reverse a videotape.
Details are on page 39.
SETUP Button
Press to access or remove the TV/VCR/DVD's Setup menu.
CLEAR Button
Press to reset or erase a setting or wrong information.
MODE Button
Press to play a Program or to start Random playback. Details are on
page 65.
Press to select a Black Level or Virtual Surround setting. Details are
on page 74.
SEARCH MODE Button
Press to find a specific time, Chapter, Track, or Title on a Disc.
Details are on pages 53-54. Press to set up Markers. Details are on page 57.
CH. (channel) K/L Buttons
Press to select memorized TV channels.
Details are on page 11.
VOL. (volume) K/L Buttons
Press to adjust the volume.
MUTE Button
Press to mute or restore the sound.
DISC MENU Button
Press to access DVD Disc menus.
Details are on page 51.
ENTER Button
Press to accept or change a menu setting.
REPEAT A-B Button
Press to set a section of a Disc to play repeatedly. Details are on
page 56.
ANGLE Button
Press to change the camera angle and watch a Disc sequence from a different perspective. Details are on
page 58.
SUBTITLE Button
Press to select a subtitle language.
Details are on page 58.
AUDIO Button
Press to select an audio language or sound mode. Details are on page 64.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 15
16 Front Panel
RL
AUDIOVIDEOHEADPHONE
STANDBY-ON
SEARCH
NEXTPREV
PLAY
F.FWDREW
PLAYSTOP
OPEN/CLOSE
REC/OTR
STOP/EJECT
VOLUME
D V D
D V D VCR/TV
OUTPUT
V C R
CHANNEL
RL
AUDIOVIDEOHEADPHONE
STANDBY-ON
SEARCH
NEXTPREV
PLAY
F.FWDREW
PLAYSTOP
OPEN/CLOSE
REC/OTR
STOP/EJECT
VOLUME
D V D
D V D TV/VCR
SELECT
V C R
CHANNEL
STOP/EJECT C A Button (VCR)
Press to stop tape playback. Press while play is stopped to remove the tape.
F.FWD i Button (VCR)
Press to fast forward the tape or to search forward quickly during playback.
Details are on page 39.
PLAY B Button (VCR)
Press to start tape playback.
Details are on page 12.
VIDEO and AUDIO L/R (left/right) In jacks Use
audio and video cables to connect these jacks to the Audio and Video Out jacks of a Camcorder, DVD Player, or VCR. This lets you watch materials playing on the other equipment when you choose AUX at the TV/VCR/DVD. Details
are on pages nine and 33.
HEADPHONE jack
Connect headphones (not supplied) here for personal listening.
Remote Sensor
Receives a signal from your remote control so you can operate the TV/VCR/DVD from a distance.
STANDBY-ON Button
Press to turn the TV/VCR/DVD on or off. Turn off the TV/VCR/DVD for a timer recording.
PLAY B Button (DVD)
Press to start Disc playback.
Details are on page 13.
PREV H, NEXTi Buttons (DVD)
Press to go to a different Chapter or Track. Details are on page 54.
DVD light (green)
Appears if the TV/VCR/DVD is in DVD mode.
OUTPUT Button
Press to select AUX, TV/VCR, or DVD mode. If you switch to TV/VCR mode, wait about four seconds before switching back to DVD mode. This button works the same as the SELECT button on the remote.
VCR/TV light (red)
Appears if the TV/VCR/DVD is in TV/VCR mode.
REC/OTR light (red)
This light flashes during recording. It lights when the TV/VCR/DVD is in Standby mode (power off) for a timer recording.
REC/OTR Button (VCR)
Press to start a videotape recording.
Details are on pages 26-27.
REW H Button (VCR)
Press to rewind the tape or to search backward quickly during playback.
Details are on page 39.
Cassette Compartment
Insert a videotape here.
Disc tray
Insert a Disc here.
CHANNEL K/L Buttons
Press to select TV channels.
Details are on page 11.
OPEN/CLOSE A Button (DVD)
Press to open or close the disc tray.
Details are on page 13.
STOP C Button (DVD)
Press to stop Disc playback.
Details are on page 13.
VOLUME K/L Buttons
Press to adjust the volume.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 16
Rear Panel 17
ANT.
L
AUDIO OUT
R
COAXIAL
ANT. Jack (Antenna In)
Connect an antenna or Cable TV signal here. This brings TV channels to the TV/VCR/DVD. If you do not connect an antenna or Cable TV signal to the TV/VCR/DVD (or connect to a Cable Box/Satellite Receiver through this jack), you will not receive any TV channels. Details are on pages eight-nine.
Power Cord
Connect to a standard AC outlet (120V/60Hz).
COAXIAL Jack (Digital Audio Out) (orange)
Connect this jack to a Digital Stereo using a digital audio coaxial cable (not supplied). Use this connection if the Stereo has Dolby Digital compatibility and has a Digital Coaxial Audio In jack. You may also use this connection when connecting the TV/VCR/DVD to a Mini-Disc or Digital Audio Tape deck. Details are on page 10.
AUDIO OUT L/R jacks (Audio Out, left and right, white and red)
Connect these jacks to an analog Stereo. The Stereo will have right and left Audio In jacks. This means it receives and sends sound through two channels, the right and the left. These jacks are usually red and white on the Stereo.
Details are on page 10.
19MDTR20(1-49).QX33 03.3.28 11:52 Page 17
18 Menu Language, Resetting TV Channels
Menu Language
This affects the language of the TV/VCR/DVD’s setup menus and on-screen display terms. It does not alter the language of TV programming, videotapes, Discs, or closed captioning.
1
Press SETUP once so the TV/VCR SETUP menu appears.
2
Press ▲ or ▼ to select LANGUAGE.
3
Press ENTER repeatedly to select ENGLISH, ESPANOL, or FRANCAIS. The selected language
will appear inside the [ ]. This will be the language of the TV/VCR/DVD setup menus in both TV/VCR and DVD modes.
4
Press SETUP to exit the menu.
– TV/VCR SETUP –
TIMER PROGRAMMING SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH
B
Resetting TV Channels
The TV/VCR/DVD may memorize channels when you turn it on the first time. You may reset channels with these steps.
● Before you begin, put the TV/VCR/DVD in TV/VCR mode.
Press SELECT so the red VCR/TV light appears on the front of the TV/VCR/DVD.
1
Press SETUP.
2
Press ▲ or ▼ to select CHANNEL SET UP. Then, press ENTER.
3
Press ▲ or ▼ to select AUTO PRESET. Press ENTER. The TV/VCR/DVD memorizes available
channels. When scanning is complete, the TV/VCR/DVD will go to the lowest available channel. Use the CH ▲/▼ buttons to scan memorized chan­nels. You can select non-memorized channels with the Number buttons.
– CHANNEL SET UP –
ADD / DELETE CH (TV)
AUTO PRESET
B
• The TV/VCR/DVD cannot change channels at the Cable Box or Satellite Receiver. Set the TV/VCR/DVD to 3, 4, or AUX. Change channels at the Cable Box/Satellite Receiver.
• If the power fails, you may have to reset the TV channels.
• If you select Spanish or French and need English, press SETUP. Press ▲or▼to select IDIOMA or LANGAGE. Press ENTER to select ENGLISH. Press SETUP to remove the menu.
• You cannot reset TV channels when the unit is in DVD mode.
Helpful Hints
2-3
1,4
PLAY
STOP
ENTER
RECORD
DISC
MENU
RETURNTITLESETUP
A
-
B
REPEATSEARCH MODE
CLEAR
DISPLAY
SPEED C.RESET
STANDBY-ON
PICTURE SELECTSLEEP
CH.
VOL.
MUTE
ZOOM
123
456
789
0 +10
+100
REPEAT
2-3
1
19MDTR20(1-49).QX33 03.3.28 11:52 Page 18
STANDBY-ON
PICTURE SELECTSLEEP
123
456
789
SPEED C.RESET
RECORD
DISPLAY
CLEAR
MODE
+100
0 +10
ZOOM
PLAY
STOP
ENTER
REPEATSEARCH MODE
CH.
VOL.
MUTE
DISC
MENU
RETURNTITLESETUP
REPEAT
A
ANGLESUBTITLEAUDIO
-
B
– TV/VCR SETUP –
TIMER PROGRAMMING SETTING CLOCK CHANNEL SET UP
B
USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH
• To confirm that a channel has been added or deleted, press the CH. ▲/▼ buttons to see if you can or cannot select the channel. Only memorized/added channels can be selected with CH. ▲/▼. Use the Number buttons to select deleted channels.
• If you connected an Antenna to the TV/VCR/DVD, channels 2-69 will be available to add or delete. If you connected to Cable TV, channels 1-125 will be available.
• This function will not operate when the unit is in DVD mode.
Helpful Hints
Adding/Deleting Channels 19
You can delete TV channels you no longer receive or seldom watch. Or, you can add more channels if the TV/VCR/DVD did not memorize all your favorite channels.
● Before you begin, press SELECT to put the
TV/VCR/DVD in TV/VCR mode. The red VCR/TV light will appear.
1
Press SETUP.
2
Press ▲ or ▼ to select CHANNEL SET UP. Then, press ENTER.
3
Press ▲ or ▼ to select ADD/DELETE CH. (TV) or (CATV) will appear beside ADD/DELETE CH. This indicates whether you connected an Antenna (TV) or a Cable TV signal (CATV) to the TV/VCR/DVD. Then, press ENTER. The menu will disappear and a TV channel will appear. The channel number will appear, along with ADD/DELETE.
4
Press ▲ or ▼ until the channel you wish to add or delete appears. You also can use the Number
buttons or the CH. ▲/▼ buttons to choose a channel.
5
Press ENTER to add or delete the channel.
To add a channel, press ENTER so ADD and the channel number appear in light blue (teal). To delete a channel, press ENTER so DELETE and the channel number appear in light red (purple). To delete another channel, repeat steps 4-5.
6
Press SETUP when you are finished.
ADD / DELETE
08
– CHANNEL SET UP –
ADD / DELETE CH (TV)
AUTO PRESET
B
– TV/VCR SETUP –
TIMER PROGRAMMING SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH
B
PLAY
STOP
ENTER
RECORD
DISC
MENU
RETURNTITLESETUP
A
-
B
REPEATSEARCH MODE
CLEAR
MODE
ANGLESUBTITLEAUDIO
DISPLAY
SPEED C.RESET
STANDBY-ON
PICTURE SELECTSLEEP
CH.
VOL.
MUTE
ZOOM
123
456
789
0 +10
+100
REPEAT
2-5
1,6
19MDTR20(1-49).QX33 03.3.28 11:52 Page 19
20 Setting the Clock
• You may have to reset the clock after a power failure.
Helpful Hint
Manual Clock Setting
You must set the clock before you can do a timer recording. Set the clock manually. Afterward, use Auto Clock to moni­tor the time. Details are on pages 22-23. If you do not receive a PBS station that carries time signals, you cannot use Auto Clock. Set AUTO CLOCK to OFF. The time will remain as you set it manually.
Before you begin ...
● With the power on, press SELECT to put the
TV/VCR/DVD in TV/VCR mode. The red VCR/TV light will appear.
1
Press SETUP.
2
Press ▲ or ▼ to select SETTING CLOCK. Then, press ENTER.
3
Press ▲ or ▼ to select MANUAL CLOCK SET. Then, press ENTER.
4
While the MONTH space is flashing, press ▲ or ▼ until the correct month appears. Then, press
B.
– MANUAL CLOCK SET –
MONTH DAY YEAR
05 / - - - - - - - - -
HOUR MINUTE
- - : - - - -
– SETTING CLOCK –
AUTO CLOCK AUTO CLOCK CH SEARCH AUTO CLOCK CH MANUAL CLOCK SET D.S. T.
B
[ON]
[02]
[OFF]
– TV/VCR SETUP –
TIMER PROGRAMMING SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH
B
PLAY
STOP
ENTER
RECORD
DISC
MENU
RETURNTITLESETUP
A
-
B
REPEATSEARCH MODE
CLEAR
MODE
ANGLESUBTITLEAUDIO
DISPLAY
SPEED C.RESET
STANDBY-ON
PICTURE SELECTSLEEP
CH.
VOL.
MUTE
ZOOM
123
456
789
0 +10
+100
REPEAT
2-4
1
19MDTR20(1-49).QX33 03.3.28 11:52 Page 20
• To adjust the clock later, follow steps 1-3 on page 20.Then press s or B to select the item you want to change. Enter the cor­rect information by pressing ▲ or ▼. Press SETUP when you are finished.
Helpful Hint
Setting the Clock (cont’d) 21
5
While the DAY space is flashing, press ▲ or ▼ until the correct day appears. Then, press B.
An abbreviation for the selected day of the week will appear.
6
While the YEAR space is flashing, press ▲ or ▼ until the correct year appears. Then, press B.
7
While the HOUR space and AM or PM are flashing, press ▲ or ▼ until the correct hour appears. Then, press B.
8
While the MINUTE space is flashing, press ▲ or ▼ until the correct minute appears.
9
Press SETUP. Although seconds are not displayed, they begin counting from zero when you press SETUP. Use this action to synchronize the clock exactly.
Press DISPLAY to see the current time on the screen. Details are on page 25.
5:40 PM
– MANUAL CLOCK SET –
MONTH DAY YEAR
05 / 07 WED 2003
HOUR MINUTE
05 : 40 PM
– MANUAL CLOCK SET –
MONTH DAY YEAR
05 / 07 WED 2003
HOUR MINUTE
05 : - - PM
– MANUAL CLOCK SET –
MONTH DAY YEAR
05 / 07 WED 2003
HOUR MINUTE
- - : - - - -
– MANUAL CLOCK SET –
MONTH DAY YEAR
05 / 07 - - - - - - -
HOUR MINUTE
- - : - - - -
PLAY
STOP
ENTER
RECORD
DISC
MENU
RETURNTITLESETUP
A
-
B
REPEATSEARCH MODE
CLEAR
MODE
ANGLESUBTITLEAUDIO
DISPLAY
SPEED C.RESET
STANDBY-ON
PICTURE SELECTSLEEP
CH.
VOL.
MUTE
ZOOM
123
456
789
0 +10
+100
REPEAT
5-8
9
19MDTR20(1-49).QX33 03.3.28 11:52 Page 21
22 Setting the Clock (cont’d)
Auto Clock Setting
You can have the TV/VCR/DVD adjust the clock using your PBS channel. Once you set the clock manually, the TV/VCR/DVD will monitor the correct time and date broad­cast by the PBS station.
Before you begin ...
● Turn on the TV/VCR/DVD power.
● Connect the antenna/Cable TV signal.
Details are on pages eight-nine.
● Turn on the Cable Box/Satellite Receiver (if applicable).
● Set up the TV channels. Details are on pages 18-19.
● Set the clock manually. Details are on pages 20-21.
● Press SELECT to put the TV/VCR/DVD in TV/VCR
mode. The red VCR/TV light will appear.
1
Press SETUP.
2
Press ▲ or ▼ to select SETTING CLOCK. Press ENTER.
3
With AUTO CLOCK selected, press ENTER so ON appears beside AUTO CLOCK.
– SETTING CLOCK –
AUTO CLOCK AUTO CLOCK CH SEARCH AUTO CLOCK CH MANUAL CLOCK SET D.S. T.
B
[ON]
[02]
[OFF]
– TV/VCR SETUP –
TIMER PROGRAMMING SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH
B
• If the TV/VCR/DVD is connected to a Cable Box or Satellite Receiver, select the local PBS sta­tion on the Cable Box/Satellite Receiver. Set the TV/VCR/DVD to the output channel of the Cable Box/Satellite Receiver (03, 04, or AUX).
Helpful Hint
2-3
1
19MDTR20(1-49).QX33 03.3.28 11:52 Page 22
STANDBY-ON
PICTURE SELECTSLEEP
123
456
789
0 +10
SPEED C.RESET
RECORD
DISPLAY
CLEAR
MODE
ZOOM
PLAY
STOP
ENTER
+100
REPEATSEARCH MODE
CH.
VOL.
MUTE
DISC
MENU
RETURNTITLESETUP
REPEAT
A
ANGLESUBTITLEAUDIO
-
B
Setting the Clock (cont’d) 23
4
If you already know your PBS channel number, skip ahead to step 8. If you do not know the channel number of your PBS station, press ▼ to select AUTO CLOCK CH SEARCH. Then press ENTER.
● The TV/DVD/VCR will search for a channel that
carries a time signal. Channels that carry the time will appear at the top of the screen. Use one of these channels when you enter your AUTO CLOCK CH at step 9. This may take several minutes. An ‘’__” appears in the lower left corner of the screen when the search is complete.
5
Press SETUP to remove the AUTO CLOCK CH SEARCH screen.
6
Press SETUP to access the menu again.
7
Press ▲ or ▼ to select SETTING CLOCK. Then, press ENTER.
8
Press ▼ to select AUTO CLOCK CH, then press ENTER.
9
Press { or B until the channel number of your PBS station appears. Use the channel number you found at step 4.
10
Press SETUP to remove the menu.
11
Press STANDBY-ON to turn off the TV/VCR/DVD and let the PBS channel update the clock.
– SETTING CLOCK –
AUTO CLOCK AUTO CLOCK CH SEARCH AUTO CLOCK CH MANUAL CLOCK SET D.S. T.
B
[ON]
[08]
[OFF]
– SETTING CLOCK –
AUTO CLOCK AUTO CLOCK CH SEARCH AUTO CLOCK CH MANUAL CLOCK SET D.S. T.
B
[ON]
[02]
[OFF]
• During the Auto Clock Channel
Search, the picture may be dis­torted.This is normal.
• If there are no PBS stations avail-
able, set AUTO CLOCK to off. Set the clock manually.
Helpful Hints
4,
7-9 5-6,
10
11
19MDTR20(1-49).QX33 03.3.28 11:52 Page 23
STANDBY-ON
PICTURE SELECTSLEEP
123
456
789
SPEED C.RESET
+100
0 +10
ZOOM
CH.
VOL.
MUTE
– AUTO CLOCK CH SEARCH –
08 10 13
– –
RECORD
DISPLAY
CLEAR
MODE
PLAY
STOP
ENTER
REPEATSEARCH MODE
DISC
MENU
RETURNTITLESETUP
REPEAT
ANGLESUBTITLEAUDIO
A
-
B
24 Daylight-Savings Time
When Daylight-Savings Time (D.S.T.) is ON, the clock will move forward one hour on the first Sunday in April and move back one hour on the last Sunday in October. To turn Daylight-Savings Time ON or OFF, follow the steps below.
● Before you begin, press SELECT to put the
TV/VCR/DVD in TV/VCR mode. The red VCR/TV light will appear.
1
Press SETUP.
2
Press ▲ or ▼ to select SETTING CLOCK. Then, press ENTER.
3
Press ▲ or ▼ to select D.S.T. Then, press ENTER until ON appears beside D.S.T. Or,
press ENTER so OFF appears beside D.S.T. if you want to disable this feature.
4
Press SETUP to remove the menu.
– SETTING CLOCK –
AUTO CLOCK AUTO CLOCK CH SEARCH AUTO CLOCK CH MANUAL CLOCK SET D.S. T.
B
[ON]
[02]
[ON]
– TV/VCR SETUP –
TIMER PROGRAMMING SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH
B
PLAY
STOP
ENTER
RECORD
DISC
MENU
RETURNTITLESETUP
A
-
B
REPEATSEARCH MODE
CLEAR
MODE
ANGLESUBTITLEAUDIO
DISPLAY
SPEED C.RESET
STANDBY-ON
PICTURE SELECTSLEEP
CH.
VOL.
MUTE
ZOOM
123
456
789
0 +10
+100
REPEAT
2-3
1,4
19MDTR20(1-49).QX33 03.3.28 11:52 Page 24
Loading...
+ 56 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use