Magnavox 13MDTD20, 20MC4204 User Manual

20MC4204 13MDTD20

COLOR TV WITH BUILT-IN DVD PLAYER

20MC4204

13MDTD20

T9103_8103UD_EN_0411 4/11/05 10:43 AM Page 1

User Manual

Thank you for choosing

Magnavox.

Need help fast?

Read your Quick Use Guide and/or Owner's Manual first for quick tips

that make using your Magnavox product

more enjoyable.

If you have read your instructions

and still need assistance,

you may access our online help at

www.magnavox.com

or call

1-800-705-2000

while with your product.

Les Guide d'utilisation rapide et Manuel de l'utilisateur regorgent d'astuces destinées à

simplifier l'utilisation de votre produit Magnavox.

Toutefois, si vous ne parvenez pas à résoudre

SMART. VERY SMART.

Magnavox vous remercie de

votre confiance.

Besoin d'une aide

rapide?

votre probléme, vous pouvez accéder à

notre aide en ligne à l'adresse

www.magnavox.com

ou formez le

1-800-661-6162 (Francophone)

1-800-705-2000 (English speaking)

Veillez à avoir votre produit à

portée de main.

Gracias por escoger

Magnavox

Necesita ayuda

inmediata?

Lea primero la GuÌa de uso rápido o el

Manual del usuario, en donde encontrar·

consejos que le ayudarán a disfrutar

plenamente de su producto Magnavox.

Si después de leerlo aún necesita ayuda,

consulte nuestro servicio de

asistencia en lÌnea en

www.magnavox.com

o llame al teléfono

1-800-705-2000

y tenga a mano el producto.

Registering your model with MAGNAVOX makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete and return your Product Registration Card at once to ensure:

Return your Product Registration Card today

to get the very most from your purchase.

Know these

safety symbols

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

*Proof of Purchase

Returning the enclosed card guarantees that your date of purchase will be on file, so no additional paperwork will be required from you to obtain warranty service.

*Product Safety Notification

By registering your product, you'll receive notification - directly from the manufacturer - in the rare case of a product recall or safety defect.

*Additional Benefits of Product Ownership

Registering your product guarantees that you'll receive all of the privileges to which you're entitled, including special money-saving offers.

Visit our World Wide Web Site at http://www.magnavox.com

Congratulations on your purchase, and welcome to the “family!”

Dear MAGNAVOX product owner:

Thank you for your confidence in MAGNAVOX.You’ve selected one of the bestbuilt, best-backed products available today. We’ll do everything in our power to keep you happy with your purchase for many years to come.

As a member of the MAGNAVOX “family,” you’re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry. What’s more, your purchase guarantees you’ll receive all the information and special offers for which you qualify, plus easy access to accessories from our convenient home shopping network.

Most importantly, you can count on our uncompromising commitment to your total satisfaction.

All of this is our way of saying welcome - and thanks for investing in a MAGNAVOX product.

P.S. To get the most from your MAGNAVOX purchase, be sure to complete and return your Product Registration Card at once.

For Customer Use

Enter below the Serial No. which is located on the rear of the cabinet. Retain this information for future reference.

Model No. __________________________________ Serial No. __________________________________

This “bolt of lightning” indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering.

The “exclamation point” calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.

WARNING: TO REDUCE THE RISK OF

FIRE OR ELECTRIC SHOCK,THIS APPARATUS SHOULD NOT BE EXPOSED TO RAIN OR MOISTURE,AND OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS.

CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.

ATTENTION:Pour éviter les choc électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu’au fond.

T9103_8103UD_EN_0411 4/11/05 10:43 AM Page 2

Safety Precautions

● Do not stand the unit up vertically. Install the unit in a horizontal and stable position.

● Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.

Warning:To prevent fire or shock hazard, do not expose this equipment to rain or moisture.

Federal Communications Commission (FCC) Warning: Any unauthorized changes or

modifications to this equipment void the user’s authority to operate it.

Laser Safety: This unit employs a laser. Only a qualified service person should remove the cover or

attempt to service this device, due to possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION:VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM.THE BEAM IS LOCATED INSIDE, NEAR THE DECK MECHANISM.

Special Information for Canadian Users: This Class B digital apparatus complies with Canadian

ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Radio/TV Interference: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and the receiver.

3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

prohibited. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

Note to the Cable TV System Installer: This reminder calls the Cable TV system installer’s

attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper grounding in particular, specifying that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as possible.

Declaration of Conformity

Model Number: 20MC4204

13MDTD20 Trade Name: Magnavox Responsible Party: Philips Consumer Electronics North America

P. O. Box 671539

Marietta, GA 30006-0026

1-800-705-2000

Safety and General Information 3

T9103_8103UD_EN_0411 4/11/05 10:43 AM Page 3

4 Safety and General Information (cont’d)

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in accordance

with the manufacturers instructions.

8. Do not install near any heat sources such as radiators, heat regis-

ters, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and third grounding prong. The wide blade or third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particu-

larly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving

the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for

long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15. This product may contain lead and mercury. Disposal of these

materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eiae.org

16. Damage Requiring Service - The appliance should be serviced

by qualified service personnel when:

A. The power supply cord or the plug has been damaged; or

B. Objects have fallen, or liquid has been spilled into the appli-

ance; or

C. The appliance has been exposed to rain; or D. The appliance does not appear to operate normally or

exhibits a marked change in performance; or

E. The appliance has been dropped, or the enclosure damaged.

17. Tilt/Stability - All televisions must comply with recommended

international global safety standards for tilt and stability properties of its cabinet design.

• Do not compromise these design standards by applying excessive pull force to the front, or top, of the cabinet which could ultimately overturn the product.

• Also, do not endanger yourself, or children, by placing electronic equipment/toys on the top of the cabinet. Such items could unsuspectingly fall from the top of the set and cause product damage and/or personal injury.

18. Wall or Ceiling Mounting - The appliance should be mounted to

a wall or ceiling only as recommended by the manufacturer.

19. Power Lines - An outdoor antenna should be located away from

power lines.

20. Outdoor Antenna Grounding - If an outside antenna is connected to

the receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges.

Section 810 of the National Electric Code, ANSI/NFPA No. 701984, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding connectors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure below.

21. Object and Liquid Entry - Care should be taken so that objects

do not fall and liquids are not spilled into the enclosure through openings.

a) Warning: To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus.

22. Battery Usage CAUTION - To prevent battery leakage that may

result in bodily injury, property damage, or damage to the unit:

• Install all batteries correctly, with + and - aligned as marked on the unit.

• Do not mix batteries (old and new or carbon and alkaline, etc.).

• Remove batteries when the unit is not used for a long time.

Example of Antenna Grounding as per NEC - National Electric Code

Note to the CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC

that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

IMPORTANT SAFETY INSTRUCTIONS

Read before operating equipment

T9103_8103UD_EN_0411 4/11/05 10:43 AM Page 4

GROUND CLAMP

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

ELECTRIC SERVICE EQUIPMENT

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)

Table of Contents 5

General Information

Safety and General Information . . . . . . . . . . . . .3-4

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . .5

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Getting Started

Remote Control Setup . . . . . . . . . . . . . . . . . . . . .8

Hooking Up the TV/DVD . . . . . . . . . . . . . . . . .9-10

Optional Connections . . . . . . . . . . . . . . . . . . . . .11

Watching TV . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Remote Control Buttons . . . . . . . . . . . . . . . .15-16

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

TV Settings

Menu Language, Auto Channel Programming . . . .18

Adding/Deleting Channels . . . . . . . . . . . . . . . . . .19

Additional TV Features

Picture Control . . . . . . . . . . . . . . . . . . . . . . . . . .20

Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Closed Captions . . . . . . . . . . . . . . . . . . . . . . . . .22

Setting V-Chip . . . . . . . . . . . . . . . . . . . . . . . . .23-27

Disc Features

DVD Disc Menus,Title Menus . . . . . . . . . . . . . . .28

Fast Forward/Reverse Search . . . . . . . . . . . . . . .29

Title/Chapter Playback, Specific Time Playback . .30

Track Playback . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Paused and Step-by-Step Playback, Resume On . .32

Repeat,A-B Repeat . . . . . . . . . . . . . . . . . . . . . . .33

Markers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Subtitles, Camera Angles . . . . . . . . . . . . . . . . . . .35

Slow Motion, Zoom . . . . . . . . . . . . . . . . . . . . . .36

Audio Language, Stereo Sound . . . . . . . . . . . . . .37

On-Screen Displays . . . . . . . . . . . . . . . . . . . .38-39

Black Level,Virtual Surround . . . . . . . . . . . . . . . .40

Random Playback, Programmed Playback . . . . . . .41

MP3/JPEG Playback . . . . . . . . . . . . . . . . . . . .42-43

DVD Setup Features

Language Settings . . . . . . . . . . . . . . . . . . . . . .44-45

Display Settings . . . . . . . . . . . . . . . . . . . . . . .46-47

Audio Settings . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Parental Password . . . . . . . . . . . . . . . . . . . . .49-50

Parental Levels . . . . . . . . . . . . . . . . . . . . . . . .51-52

Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53-54

Initializing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Information You May Need

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Helpful Hints . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . .59

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

T9103_8103UD_EN_0411 4/11/05 10:43 AM Page 5

6 Introduction

• Automatic Channel Setup

• Automatic Power Off

• Closed Captions

• Picture Controls

• Remote Control

• Setup menus in English, French or Spanish

• Sleep Timer

•V-Chip (Parental Control)

Welcome to your TV/DVD owner’s manual.

This manual describes the 20MC4204 and 13MDTD20.These two models are different in size and design, but operate identically. The 20MC4204 is illustrated in this manual.

• Audio Language choices *

• Camera Angles *

• Markers

• MP3 Playback

• Parental Control *

• Paused/Fast/Slow/Step-by-Step Playback

•

Programmed Playback (Audio CD, MP3, JPEG)

• Random Playback (Audio CD, MP3, JPEG)

• Repeat (A-B, Chapter,Title,Track, Group, Disc)

• Resume On

• Specific Time/Title/Chapter/Track Playback

• Subtitles *

• Zoom

* If available on the disc

DVDDisc Menus...

Some explanations in this manual describe DVD disc menus. DVD manufacturers set the menus, which vary among DVDs. Not all DVDs have menus. If the DVD has a menu, access it by pressing the DISC MENU button on the remote control.

Details are on page 28.

Setup Menus...

Some instructions explain how to use the setup menus of the TV/DVD.There are two setup menus: one for the TV features while the unit is in TV mode, and one for the disc features while the unit is in DVD mode. Access the setup menus by pressing SETUP on the remote control. While in TV mode, you can select only the TV setup menu. In DVD mode, you can select both the TV setup menu and the setup menu for the unit’s DVD player. Press the SETUP button once to select the TV setup menu. Press SETUP twice to get to the DVD player’s setup menu. Even if you set a DVD feature in the unit’s setup menu, it will not be available if the current disc does not include that feature.

Available Disc Features...

All features described in this manual are not available on every disc. If the feature is not available on the disc, you cannot use the TV/DVD to make it available. An will appear in the top right corner of the TV screen if you try to access a feature that is not currently available. For example, some features are available only during playback, while others are available only if playback is stopped. If you cannot access a feature, try stopping or starting playback, then try the feature again.

Features - Discs

Features - TV

• Remote Control

•Two AA batteries

• User Manual

• Quick-Use Guide

• Registration Card

Package Contents

T9103_8103UD_EN_0411 4/11/05 10:43 AM Page 6

Playable Discs 7

Region Codes

This TV/DVD has a Region One (1) DVD player. DVDs must be labeled for ALL regions or for Region 1 in order to play on the unit.You cannot play DVDs that are labeled for other regions. Look for the symbols below on your DVDs. If these region symbols do not appear on your DVD, you cannot play the DVD in this TV/DVD.

The number inside the globe refers to a region of the world. Region 1 represents the United States, Canada, upper regions of North America, Bermuda, the U.S.Virgin Islands, and small regions near Australia. A DVD labelled for a specific region can only play on DVD players with the same region code.

Color Systems

DVDs are recorded in different color systems throughout the world.The most common color systems are NTSC (which is used primarily in the United States and North America), PAL, and SECAM. The DVD player of this unit uses NTSC, so DVDs you play must be recorded in the NTSC system.You cannot play DVDs recorded in other formats.The color system of the DVD may be listed on the DVD or on the disc case.

Unacceptable Discs

If you insert an unacceptable type of disc, a Disc Error message may appear on the TV screen.The following discs will not play on this DVD player.

• CD-ROM

• DVD-RAM

• DVD-ROM

• Unfinalized discs

• Super Audio CD (SACD) (The Audio CD layer of

a hybrid SACD may play.)

• Compact Disc-Interactive (CD-I)

• Video Single Disc (VSD)

• DVD-Audio

• DVD contains MP3 or JPEG files

• DVD/CD contains Windows MediaTMAudio

Playable Discs

The DVD player of this TV/DVD will play many types of discs, including Digital Video Discs (DVDs) and Audio Compact Discs (CDs). It will play MP3 and JPEG files as well. To play a DVD, make sure it meets the requirements for Region Codes and Color Systems as described below. Discs that have the following logos will play on the DVD player of this TV/DVD. Finalize CD-R, CDRW,DVD+R and DVD+RW Discs before playing them in the TV/DVD.

● A disc may not play properly if the disc’s recorded area is less than 55mm across.

● Do not glue paper or put stickers on to the disc. These may damage the disc, and the TV/DVD may not

read it correctly.

DVD: Prerecorded Digital Video Discs

Audio CDs

MP3: Digital audio files recorded on a CD-R or CD-RW

Video CDs

CD-R: Compact Disc Recordable. CD-Rs can be

recorded on only once.

CD-RW: Compact Disc Rewritable. CD-RWs can be recorded on multiple times.

DVD+R: DVD Recordable. DVD+Rs can be recorded on only once.

DVD+RW: DVD Rewritable. DVD+RWs can be recorded on multiple times.

T9103_8103UD_EN_0411 4/11/05 10:43 AM Page 7

is a trademark of DVD Format/Logo Licensing Corporation.

8 Remote Control Setup

Using the Remote Control

Point the remote control at the remote sensor on the front of the TV/DVD. Details are on page 14. Do not put objects between the remote and the TV/DVD.

Putting Batteries in the Remote Control

Remove the battery compartment lid on the

bottom of the remote control by sliding the lid down and off, following the direction of the arrow on the lid.

Place two AA batteries inside the battery compartment with their +and – ends aligned as

indicated.

Replace the battery compartment lid.

Recycling Guidelines/Battery Safety

● Your new product and its packaging contain materials that

can be recycled and reused. Specialized companies can recycle your product to increase the amount that needs to be properly disposed. Your product uses batteries that should not be thrown away when depleted but should be disposed of as small chemical waste. Please find out about the local regulations on disposal of your old product, batteries and packaging whenever you replace existing equipment.

● Battery Usage CAUTION - To prevent battery leakage

that may result in bodily injury, property damage or damage to the unit.

• Install ALL batteries correctly, with the + and – markings on the battery aligned as indicated on the unit.

• Do not mix batteries, for example, old with new or carbon with alkaline.

• Remove batteries when the unit will not be used for a long time.

T9103_8103UD_EN_0411 4/11/05 10:43 AM Page 8

Hooking Up the TV/DVD 9

ANT.

OUT

ANT.

Connect an RF coaxial cable (not supplied) to the OUT jack on the Cable Box/ Satellite Receiver and to the ANT. jack on the TV/DVD.

Connect a Cable TV signal or an antenna to the ANT. jack.

Hook up your TV/DVD using one of the connections shown.

Hooking Up Your TV/DVD with a Cable TV Signal or Outdoor Antenna

Connect the Cable TV or Satellite signal to the IN jack on the Cable Box or Satellite Receiver.

Hooking Up Your TV/DVD with a Cable Box/Satellite Receiver

To view any channel, set the TV/DVD to the output channel (channel 03 or 04) of the Cable Box/Satellite Receiver. Then, select channels at the Cable Box/Satellite Receiver.

Your Cable Box/Satellite Receiver may have audio/video out jacks instead of the single antenna out jack (RF coaxial or 75 ohm) shown here. If so, connect audio/video cables to the audio/video out jacks of the Cable Box/Satellite Receiver and to the AUDIO/VIDEO IN jacks on the front of the TV/DVD. Press SELECT on the remote to set the TV/DVD to AUX, not channel 3 or 4. Select channels you want to watch at the Cable Box/Satellite Receiver as usual, leaving the TV/DVD on AUX.

Instructions continue on the next page.

T9103_8103UD_EN_0411 4/11/05 10:43 AM Page 9

10 Hooking Up the TV/DVD (cont’d)

OUT

VIDEO

OUT

3CH 4CH

ANT.

AUDIO

L R

AUDIO/VIDEO IN jacks on

front of TV/DVD

audio/video out jacks on VCR

(example only)

Connect audio cables to the audio out jacks on the VCR and to the red and white AUDIO IN jacks on the front of the TV/DVD.

Connect a video cable to the video out jack on the VCR and to the yellow VIDEO IN jack on the front of the TV/DVD.

When all other connections are complete, plug in the TV/DVD’s power cord.

Hooking Up Your TV/DVD to Another Video Source (VCR, DVD player, Camcorder, etc.)

You may need this connection if you want to play discs or tapes on other equipment but watch them on the TV/DVD. Press SELECT on the remote to choose AUX at the TV/DVD when viewing materials playing on other equipment. Audio and video cables are not supplied.

Instructions continued from the previous page.

T9103_8103UD_EN_0411 4/11/05 10:43 AM Page 10

COAXIAL

Optional Connections 11

•You cannot use a Mini-Disc or Digital Audio Tape deck to copy Dolby Digital 5.1 channel surround sound discs.

• If the disc is not recorded in Dolby Digital 5.1 channel surround sound, you will not hear multi-channel sound even if you use the Digital Stereo hookup.

•To see if your disc is recorded in Dolby Digital, look for a Dolby Digital logo on disc or on its case.

•To see if your Stereo has Dolby Digital, look for a Dolby Digital logo on your Stereo. Or, refer to the Stereo owner’s manual.

Digital Stereo Hookups

You can connect the TV/DVD to a Stereo that has a coaxial digital audio in jack. Use this hookup if you want to hear the TV/DVD sound through the Stereo instead. Use these connections for a Dolby Digital-compatible Stereo or for a Receiver that has a Mini-Disc or Digital Audio Tape deck.

Connect the antenna/Cable TV signal. Details are on pages 9.

Connect a coaxial digital audio cable (not supplied) to the COAXIAL DIGITAL AUDIO OUT jack on the TV/DVD. Also connect the cable to the Stereo’s coaxial digital audio in jack.

If the Stereo is Dolby Digitalcompatible, set Dolby Digital to BITSTREAM. If the Stereo is not

Dolby Digital-compatible or if you connected to a Mini-Disc or Digital Audio Tape Deck, set Dolby Digital to PCM. Details are on page 48. An incorrect setting causes noise distortion and damages speakers. To see if your Stereo has Dolby Digital, look for a Dolby Digital logo on your Stereo. Or, refer to the Stereo owner’s manual.

Coaxial digital audio cable

to COAXIAL DIGITAL

AUDIO OUT jack

on TV/DVD

Coaxial digital audio cable

To Stereo’s coaxial digital

audio in jack

Helpful Hints

T9103_8103UD_EN_0411 4/11/05 10:43 AM Page 11

12 Watching TV

This unit selects available TV channels automatically when you connect an Antenna or Cable TV signal to it. To reset TV channels, see pages 18 and 19. If you are using a Cable Box or Satellite Receiver, you do not need to set channels at the TV/DVD.

Press STANDBY-ON to turn on the TV/DVD.

To watch TV, press CH. ▲ or ▼ to select

memorized channels. Memorized channels are those that appear automatically when you flip through channels. If a channel is skipped, you still can use the Number buttons to select it.This is a non-memorized channel; it may have weak reception in your area. To update your memorized and non-memorized channels, see page 19. Remember, if you are using a Cable Box/Satellite Receiver, set the TV/DVD to channel 3 or 4 or AUX. Change channels at the Cable Box/Satellite Receiver.

Press VOL. ▲ or ▼ to adjust the volume.

2 3

T9103_8103UD_EN_0411 4/11/05 10:43 AM Page 12

VOLUME 20

Playing a Disc 13

Before you begin, turn on the power of any equipment connected to the TV/DVD. Make sure other equipment is set to the correct channel. Details are on page 10-11.

Press STANDBY-ON to turn on the TV/DVD.

Press OPEN/CLOSE A to open the disc tray. The

unit will switch to DVD mode automatically.

Place a disc on the tray. Some DVDs are recorded on

both sides. Make sure the label of the side you want to play is facing up. Or, if the DVD is recorded on only one side, place the disc on the tray with the label facing up and the shiny side facing down.

Press PLAY B to close the tray. The tray will close and playback will begin. If playback does not start automatically, press PLAY B again. If a DVD menu appears instead, see page 28. To play MP3 or JPEG files, see page 42-43. You also can close the tray by pressing OPEN/CLOSE A.

Press STOP C to stop playback.

REMINDER : Only certain discs will play.

See page 7 for details.

•Even if you turn off the unit in DVD mode, if you turn it on again with the STANDBY-ON button, it will be in TV/DVD mode. If the unit was shut down by unplugging the power cord or due to a power failure, it will be in DVD mode when you turn it on again.

• An “X” may appear on the screen when you try to access a feature that is not available.This is not a problem with the TV/DVD.

• If a disc is dirty or scratched, the picture may be distorted or playback may stop. Remove the disc and try a different one.

•Pressing OPEN/CLOSE A or PLAY B when the power is off turns on the unit in DVD mode (instead of the usual TV mode).

• If a disc has multiple layers, the picture may freeze occasionally. This happens when the first layer switches to the second layer. This is not a malfunction.

Helpful Hints

T9103_8103UD_EN_0411 4/11/05 10:43 AM Page 13

14 Front Panel

Disc tray

Insert a disc here.

Details are on page 13.

PLAY B Button

Press to start disc playback.

Details are on page 13.

STOP C Button

Press to stop disc playback.

CHANNEL K/L Buttons

Press to select TV channels.

Details are on page 12.

VOLUME K/L Buttons

Press to adjust the volume.

Details are on page 12.

AUDIO (left/right)/VIDEO IN jacks

Use audio and video cables to connect these jacks to the audio and video out jacks of a Camcorder, DVD player, etc.This lets you watch materials playing on the other equipment when you choose AUX at the TV/DVD. Details are on page

10.

STANDBY-ON yyButton

Press to turn the TV/DVD on or off.

Remote Sensor

Receives a signal from your remote control so you can operate the TV/DVD from a distance.

SEARCH/PREV j/NEXT i Buttons

Press to go to a different chapter or track. Or, press and hold for two seconds for a forward or reverse search.

PAUSE F Button

Press to pause disc playback.

Details are on page 32.

OPEN/CLOSE A Button

Press to open or close the disc tray.

HEADPHONE jack

Connect headphones (not supplied) here for personal listening.

Front design varies slightly among models.

T9103_8103UD_EN_0411 4/11/05 10:43 AM Page 14

VIDEO

L - AUDIO - R

STANDBY-ON

VOLUME CHANNEL

OPEN/CLOSE

PAUSESTOP NEXTPLAYPREV

HEADPHONE

Remote Control Buttons 15

PICTURE Button

Press to access the picture controls. Details are on page 20.

STANDBY-ON Button

Press to turn on or off the TV/DVD.

Number Buttons TV Mode: Press two digits to

access a specific channel. Press 0 before the number of a single digit channel.

Details are on page 12.

+100/+10 button: To select channels 100 or higher, press +100/+10, then the Number buttons of the last two digits of the channel number. DVD Mode: Use the Number buttons to enter a single-digit track or chapter number. +100/+10 button: Press before entering double-digit numbers. For example, to select chapter 16, press +100/+10, then 1, 6.

SLEEP Button

Press to set the Sleep Timer.

Details are on page 21.

PAUSE k Button

Press to pause disc playback. Press repeatedly to advance the DVD picture one frame at a time. Details are on page 32.

DISPLAY Button

Press to see the disc status.

Details are on pages 38-39.

TITLE Button

Press to access a DVD’s title menu if available. Details are on

page 28.

SELECT Button

Press to choose TV,AUX or DVD mode.When you select DVD mode using this button, you must press PLAY B or OPEN/CLOSE A before you can access the DVD features or setup menus.

h and g Buttons

Press g to search forward during disc playback. Press h to search backward during disc playback. Details are on page 29.

STOP C Button

Press to stop disc playback.

Arrow K L

{BButtons

Press to select menu items.

RETURN Button

Press to go to the previous setup menu. Press to remove some menus or displays.

ENTER Button

Press to adjust or accept a menu setting.

REPEAT Button

Press to play a disc, title, chapter or track repeatedly.

Details are on page 33.

T9103_8103UD_EN_0411 4/11/05 10:43 AM Page 15

16 Remote Control Buttons (cont’d)

OPEN/CLOSE A Button

Press to open or close the disc tray.

ZOOM Button

Press to enlarge the picture during DVD playback. Details are

on page 36.

PREV H and NEXT G Buttons

Press to go to other tracks or chapters. Details are on page 31.

SETUP Button

Press to access or remove the TV/DVD’s setup menus.

CLEAR Button

Press to reset or erase wrong information.

MODE Button

Press to play a Program or to start Random Playback.

Details are on page 41.

Press to set Black Level or Virtual Surround.

Details are on page 40.

SEARCH MODE Button

Press to find a specific time, chapter, track or title on a disc.

Details are on pages 30-31. Press to set up Markers. Details are on page 34.

CH. (channel) o/p Buttons

Press to select memorized TV channels. Details are on pages 12,

18 and 19.

VOL. (volume) o/p Buttons

Press to adjust the volume. Pressing a VOL. o/p while the sound is muted will restore the volume.

MUTE Button

Press to mute or restore the sound.

PLAY B Button

Press to play a disc.

Details are on page 13.

DISC MENU Button

Press to access DVD disc menus. Details are on page 28.

REPEAT A-B Button

Press to play a section of a disc repeatedly.

Details are on page 33.

ANGLE Button

Press to change the camera angle and watch a sequence from a different perspective.

Details are on page 35.

SUBTITLE Button

Press to select a subtitle language. Details are on page 35.

AUDIO Button

Press to select an audio language or sound mode. Details

are on page 37.

T9103_8103UD_EN_0411 4/11/05 10:43 AM Page 16

Rear Panel 17

COAXIAL DIGITAL AUDIO OUT jack

Connect this jack to a Digital Stereo using a coaxial digital audio cable (not supplied). Use this connection if the Stereo has Dolby Digital compatibility and has a coaxial digital audio in jack. You may also use this connection when connecting the TV/DVD to a Mini-Disc or Digital Audio Tape deck. Details are

on page 11.

ANT. jack (Antenna In)

Connect an antenna or Cable TV signal here. This brings TV channels to the TV/DVD. If you do not connect an antenna or Cable TV signal to the TV/DVD (or connect to a Cable Box/Satellite Receiver through this jack), you will not receive any TV channels. Details are on

pages 9.

Power Cord

Connect to a standard AC outlet (120V/60Hz).

T9103_8103UD_EN_0411 4/11/05 10:43 AM Page 17

COAXIAL

ANT.

Menu Language

This affects the language of the TV/DVD’s setup menus and on-screen display terms.This does not alter the language of TV programming or discs.

● Before you begin, press SELECT to put the TV/DVD

in TV mode.

Press SETUP.

Press ▲ or ▼ to select LANGUAGE.

Press ENTER to select ENGLISH, ESPAÑOL or FRANÇAIS. The selected language will flash inside

the [ ].This will be the language of the TV/DVD setup menus.

Press SETUP to exit the menu.

18 Menu Language, Auto Channel Programming

• If you select Spanish or French but need English menus, press SETUP. Press ▲ or ▼ to select IDIOMA or LANGAGE. Press ENTER to select ENGLISH.Then, press SETUP.

• The TV/DVD cannot change channels at the Cable Box or Satellite Receiver. Set the TV/DVD to channel 3, 4 or AUX. Change channels at the Cable Box/Satellite Receiver. Details are on page 9.

• Channel settings will be saved even if the power fails.

•You cannot set up TV channels if the unit is in DVD mode.

2-3

1,4

Helpful Hints

Auto Channel Programming

To auto program only the channels which are available in your area, follow the steps below.

● Before you begin, press SELECT to put the TV/DVD

in TV mode.

Press SETUP.

Press ▲ or ▼ to select CHANNEL SET UP. Then, press ENTER.

Press ▲ or ▼ to select AUTO CH PROGRAMMING. Press ENTER. The TV/DVD

memorizes available channels.When scanning is complete, the TV/DVD will go to the lowest available channel automatically. To stop channel scanning before it is finished, press SETUP on the remote.

2-3

— TV SETUP —

CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF]

– CHANNEL SET UP –

ADD / DELETE CH (CATV)

AUTO CH PROGRAMMING

— TV SETUP —

CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF]

T9103_8103UD_EN_0411 4/11/05 10:43 AM Page 18

+ 42 hidden pages