MTT 990
HIGH-END, QUARTZ-CONTROLLED DIRECT DRIVE TURNTABLE
Resonance-optimised full-size 12“ platter made of precision-turned, high-compressed special polymer
Solid, resonance-optimised wooden chassis with stylish high-gloss finish
J-shaped tone arm made of specially alloyed aluminium, extra long 10“ version for minimum
tracking error angle
Available without cartridge or including high-performance cartridge ’Audio Technica AT 95E‘ with elliptical stylus
MAGNAT Audio-Produkte GmbH • Lise-Meitner-Str. 9 • D-50259 Pulheim • www.magnat.de
MTT 990
WITH CARTRIDGE WITHOUT CARTRIDGE
HIGH-END, QUARTZ-CONTROLLED DIRECT DRIVE TURNTABLE
MAGNAT Audio-Produkte GmbH • Lise-Meitner-Str. 9 • D-50259 Pulheim • www.magnat.de
MTT 990
Top side
Bottom side
HIGH-END, QUARTZ-CONTROLLED DIRECT DRIVE TURNTABLE
MAGNAT Audio-Produkte GmbH • Lise-Meitner-Str. 9 • D-50259 Pulheim • www.magnat.de
MTT 990
HIGH-END, QUARTZ-CONTROLLED DIRECT DRIVE TURNTABLE
DRIVE
Quartz-controlled direct drive with high torque motor
Comfortable one-button control
Speed selection: 33 , 45, 78 rpm
Low standby power consumption: < 0.5 watt
Power supply 115 / 230 VAC 50/60Hz (switchable)
TONE ARM
10“ J-shaped tone arm made of specially alloyed aluminium
For cartridges with a dynamic compliance of medium to medium-sti
Headshell with SME fitting
Stainless steel tone arm bearings with carbon steel bearing balls
Mechanically decoupled tone arm counterweight
Height of the tone arm basis can be adjusted to fit almost all cartridges
Hydraulically damped tone arm li
High-quality internal tone arm wiring from Mogami/Japan
Gold-plated RCA audio outputs and solid ground terminal
PLATTER
Heavy, solid platter made of precision-turned, high-compressed special polymer
Full-size platter (diameter: 12“ / 305 mm)
The record can be placed directly on the platter or on a felt mat (included)
CABINET
Solid MDF cabinet
High-quality glossy lacquering
Height-adjustable, decoupling feet
Acrylic dust cover can be optionally mounted
CARTRIGE (ART.-NO. 149 700/149 700C)
High-performance cartridge ’Audio Technica AT 95E‘ with elliptical stylus
MAGNAT Audio-Produkte GmbH • Lise-Meitner-Str. 9 • D-50259 Pulheim • www.magnat.de
Errors and technical changes reserved (08/17)
MTT 990
HIGH-END, QUARTZ-CONTROLLED DIRECT DRIVE TURNTABLE
PRINCIPLE
Quartz-controlled direct drive
SPEEDS
33 , 45, 78 rpm
WOW & FLUTTER
< 0.08 % (33 rpm)
SIGNAL/NOISE RATIO (A-WEIGHTED)
> 72 dB
SIGNAL/NOISE RATIO (UNWEIGHTED)
> 65 dB
TORQUE
> 2.2 kgf cm
PLATTER DIAMETER
305 mm
PLATTER WEIGHT (NET)
1.9 kg
TONEARM LENGTH
10“
FOR CARTRIDGES WEIGHING
3 – 10 g
FOR CARTRIDGES WITH A
DYNAMIC COMPLIANCE OF
Medium – medium-sti
OVERHANG
15.3 mm
OFFSET ANGLE
21.4°
WEIGHT OF HEADSHELL
9 g
ADJUSTMENT RANGE OF TRACKING FORCE
0 – 40 mN / 0 – 4.0 g
ADJUSTMENT RANGE OF ANTISCATING
Analogue to tracking force
VTA (HEIGHT ADJUSTMENT)
6 mm
CABINET SURFACE
Piano Black
Dimensions (WxHxD)
Cover closed: 450 x 162 x 367 mm
Cover open: 450 x 412 x 412 mm
WEIGHT
11 kg
ART.-NO. /EAN
MTT 990 (CE-Version with cartridge): 149 700 / 40 18843 49700 6
MTT 990 (CE-Version without cartridge): 149 701 / 40 18843 49701 3
MTT 990 (CCC-Version with cartridge): 149 700C / 40 18843 97009 7
MTT 990 (CCC-Version without cartridge): 149 701C / 40 18843 97019 6
WITH CARTRIDGE
WITHOUT CARTRIDGE
MAGNAT Audio-Produkte GmbH • Lise-Meitner-Str. 9 • D-50259 Pulheim • www.magnat.de
Errors and technical changes reserved (08/17)
Loading...